User's Manual for Device Migration Navigator

REVISION 1

0-2

0-2

ApplicationThis manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.

CorrectionsThis manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applica0-1le products or in the contents of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

TrademarksThe product names and company names used in this manual are the registered trademarks of the individual companies.

CopyrightThis manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

Copyright CANON INC. 2012

CautionUse of this manual should be strictly supervised to avoid disclosure of confidential information.

0-3

0-3

ContentsUser's Manual for Device Migration Navigator ------------------------1-1

1.Overview --------------------------------------------------------------------------- 1-11-1.Overview --------------------------------------------------------------------------------- 1-11-2. Background ---------------------------------------------------------------------------- 1-11.3. Purpose --------------------------------------------------------------------------------- 1-1

2. Operation Environment ------------------------------------------------------- 1-13. Installation, startup, and termination --------------------------------------- 1-1

3-1. Installation ------------------------------------------------------------------------------ 1-13-2. Startup ----------------------------------------------------------------------------------- 1-23-3. End of the tool ------------------------------------------------------------------------- 1-2

4. Basic Screen Structure -------------------------------------------------------- 1-25. Operation Procedure ---------------------------------------------------------- 1-3

5-1.Step1. Select source model--------------------------------------------------------- 1-35-2. Step2. Select target model --------------------------------------------------------- 1-45-3. Step3. Mark available environment/device ------------------------------------- 1-55-4. Step4. Target data selection method -------------------------------------------- 1-55-5. Step5. Select target data ----------------------------------------------------------- 1-65-6. Step6. Select migration method -------------------------------------------------- 1-75-7. Step7. Migration procedure -------------------------------------------------------- 1-9

6.Print/save ------------------------------------------------------------------------- 1-117.Version information ------------------------------------------------------------ 1-11

1-1

1-1

User's Manual for Device Migration Navigator

1.Overview ■ 1-1.Overview

Device Migration Navigator is a tool for identifying an efficient settings/data migration means used during installation of an iR/imagePRESS/iR-ADV machine.

■ 1-2. BackgroundIn order to reduce the service cost for "installation (replacement/mass installation)" and "data migration during maintenance", various data migration means have been implemented in new MFP to deal with various use cases.However, the major increase in the number of means makes it difficult to identify "the means appropriate for the situation". It is therefore necessary to have a tool for selecting an appropriate means which satisfies the requirements.

■ 1.3. PurposeThe purpose of this tool is to make it easy to select an appropriate data migration means when performing one of the following service works on iR/imagePRESS/iR-ADV.- Installation- Replacement- Backup/restoration of data in the machine during a service work

2. Operation EnvironmentThis tool runs on a local PC where 32-bit Windows XP, Vista, 7, or 64-bit Windows 7 runs.In the case of Windows XP, it is necessary to install .NET Framework 3.0 in advance.

CAUTION:To display "Japanese" with non-Japanese version of Windows XP, additional installation of Japanese font is required.Execute the following: Control Panel (Classic) > Regional and Language Options > Languages > Install files for East Asian languages.Installer CD of Windows XP is needed.

3. Installation, startup, and termination ■ 3-1. Installation

There is no installer for this tool.It can be used just by unzipping the distributed zip file.When the zip file is unzipped, a DMN folder containing this tool is created.The DMN folder contains the tool (DMN.exe) and related data.Due to the restriction of the module used in this tool, the full path of DMN.exe needs to be 128 bytes or less (including the file name "DMN.exe") in UTF-8.It is therefore necessary to save the unzipped folder in a layer which is not too deep.In order to change the installation location of this tool, the whole DMN folder should be moved using Explorer.

CAUTION:- If the path name to the execution file is longer than 128 bytes in UTF-8 notation at startup of the tool, an error is displayed and the tool is terminated. The path length includes the file name "DMN.exe".

- The memory size (the number of bytes) used per character in UTF-8F-1-1

F-1-2

1-2

1-2

■ 3-2. StartupDouble-click DMN.exe in the DMN folder.

CAUTION:If the same user starts the execution file of this tool again while executing it, the tool started later is exited without displaying anything.

■ 3-3. End of the toolClick the [End] button to exit the tool.

F-1-3

F-1-4

4. Basic Screen Structure

1 2

34

56

[1]. Procedure overview The work to be performed on the current screen is displayed.[2]. Step number The step number of the current work among all the work steps of this tool is displayed.[3]. Work area Select an item.[4]. Selection results display The items selected in earlier operations are displayed.[5]. Operation buttons Operation buttons ([Next], [Back], and [End])[6]. Version information Tool, Data version

F-1-5

1-3

1-3

5. Operation Procedure ■ 5-1.Step1. Select source model

1) Select "Color/BW" and "Series", and then select Source model from the list to be displayed in "Source model".

2) Click [Next].

F-1-6

CAUTION:Contents of selection are displayed on "Source model" in the selection results display field.

The selection results display field is updated when [Next] is clicked.Even when selection is changed by clicking the [Back] button, displayed contents are not updated until the [Next] button is clicked.

F-1-7

1-4

1-4

■ 5-2. Step2. Select target model1) Select Target model like selection of source model.

F-1-8

CAUTION:When the same model is selected for Source model and Target model, "Target device serial number" can be selected.To restore backup data to the source device, select [Same as source device] in [Target device serial number].

Select "Same as source device" or "Different from source device".F-1-9

2) Click [Next].

1-5

1-5

■ 5-3. Step3. Mark available environment/device1) Select an environment available for data migration.

2) Click [Next].

F-1-10

■ 5-4. Step4. Target data selection method1) Select "Select individual data" or "Select data set by object".- Select individual data: To individually select the items (data) to be migrated- Select data set by object: To select related items (data) as a group by purpose (function)

2) Click [Next].

F-1-11

1-6

1-6

■ 5-5. Step5. Select target data1) Select the target data for migration.- When "Select individual data" is selected

F-1-12

CAUTION:Clicking the [i] button displays the points to note.

F-1-13

F-1-14

1-7

1-7

- When "Select data set by object" is selected

2) Click [Next].

F-1-15

■ 5-6. Step6. Select migration method1) As for initial values of "Main migration method" and "Sub migration method", the values with the highest priority judged by the tool are displayed.

F-1-16

1-8

1-8

2) Select the migration method with the first priority from the pull-down list of "Main migration method".

CAUTION:In the pull-down list, the number of items which can be executed by each method is displayed.

F-1-17

3) Select the migration method with the second priority from the pull-down list of "Sub migration method".

F-1-18

1-9

1-9

4) Migration method by each "Target data" is displayed automatically based on the information selected in "Main/Sub migration method".If there is more than one Migration method, it can be selected from the pull-down list.

5) Click [Next].

F-1-19

■ 5-7. Step7. Migration procedure- Migration method summary is displayed.

CAUTION:Language of the Migration method can be changed from the pull-down menu of "Language of the procedure explanation".

F-1-20

1-10

1-10

- Export procedure (EXP-1, EXP-2, ...): The export procedure is displayed.

F-1-21

- Import procedure (IMP-1, IMP-2, ...): The import procedure is displayed.

F-1-22

1-11

1-11

6.Print/saveClick [Print] to display the standard Windows print dialog. To make a print, select a printer you want to use, and click [Print]. To save the screen as a file (in XPS format), select [Microsoft XPS Document Writer] and click [Print].

F-1-23

7.Version information[1]Tool Version[2]Database Version[3]Contents Version[4]Database engine Version

1

2

34

F-1-24

F-1-25