USER MANUAL

BlackBox Series D10

USB Desktop RFID Reader

20111110 Updated

Basical Description :

The USB Desktop Reader – BlackBox Series D10 supports

- EM4100 Unique RO

- iProx card

- eProx card option

USB Desktop Reader – BlackBox Series D10 is a small,handy and simple RFID Reader for your USB equipped terminal and laptop.This desktop reader is using USB interface for data transfer.It is useable for many different applications.

Applications:

- Desktop reader / Encoders

- Network Access Control,

- Access Control

- Card Authorization

Interface: USB

Integrated Antenna: Yes

Operating System: MS Windows XP and Win 7

Reading distance: Up to 10cm (depending on the version and type of tag )

Operating Temperature: 0℃ -- +50 ℃

Dimensions: 9.5 x 6.0 x 1.0 cm

Material: ABS

Colour: Black

Product Specification:

Functions:

- Read UID of EM4100 Unique RO chip

- Read iProx card

- Program CET5577 / CET5200 as EM Unique RO Tag

- Program CET5500 as iProx card

- Program eProx card option

BlackBox Series D10

Software Installation

Step 1 : Install USB Driver

1 -1 : Extract

1 -2 : Just connect the D10 reader to the computer via USB cable,the message at the right-bottom of the PC window will automatically show as following :

Here,we can see that the USB driver has been successfully installed,and we can start to run the application software.

• The CH341SER USB driver supports WINDOWS98/ME/2000/XP/VISTArver2008/WIN7/64/32-bit

For WIN 7 32-bit,we can directly install CH342SER.exe

For WIN 7 64-bit,we need to click F8 during WINDOWS system starting,and select “ Disable Digital Signature Mode “ to start the WINDOWS system.Then,once we find the relevant hardware in device manager,we need to click “ update driver “ ,and manually install this driver.

Software Installation

Step 2 : Install iProxProgrammer PC Software

2 -1 : Extract

2 -2 : Double click to run PC software as described

from slide 5

Dedicated for programming of iProxcard and EM4100 card

Select this one

Step 1 Step 2

Step 3Step 4

Step 5 Step 6

Step 7 Step 8

Now,in the directory of D:program Files\iProxCard ,you will see following files created:

Double click , to run PC software as mentioned from slide 7.

User Manual for PC software

How to program CET5577 / CET5200 as EM4100 Unique RO tag

1.Select Com Port 2.Click Link

3.Slect EM4100

User Manual for PC software

Input into Facility Code with data 2,input into Card Number with data 2012345678,and click Write Card,the message window shows “2,2012345678 Write AND Read Block Success “,means the EM ID number has been already successfully programmed into the card.

How to program CET5577 / CET5200 as EM4100 Unique RO tag

Here,the next card number to be programmed is automatically created one by one .

User Manual for PC software

Click Read Card, the message window shows “ 2,2012345678 “,means the EM ID card number just programmed in Denary format is 2012345678,and the customer code in denary format is 2.

How to program CET5577 / CET5200 as EM4100 Unique RO tag

User Manual for PC software

1.Select iProx WG length ( here we take iProx WG26 as example )

2.Select Parity ( here we take parity 2 as defaulted )

Input into Facility Code with data 120,input into Card Number with

data 12345,and click Write Card,the message window shows

“120,12345 Write AND Read Block Success “,means the iProx WG26

card number has been already successfully programmed into the card.

How to program CET5500 as iProx card

Here,the next card number to be programmed is automatically created one by one .

User Manual for PC software

Click Read Card, the message window shows “ 120,12345 “,means the iProx WG26 card number just programmed is12345,and the facility code is 120 .

How to program CET5500 as iProx Proxcard