Ultra-Fast Soft Recovery Diode Module · ☞Repetitive Reverse Voltage : VRRM= 300V ☞Low Forward...
4
Copyright@Dawin Electronics Corp. All right reserved DWM2F100N030 Apr. 2006 Description Ultra-FRD module devices are optimized to reduce losses and EMI/RFI in high frequency power conditioning electrical systems. These diode modules are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses. Features ☞ Repetitive Reverse Voltage : V RRM = 300V ☞ Low Forward Voltage Drop : V F (typ.) = 1.35V ☞ Average Forward Current : I F (AV.) = 100A @ Tc = 100℃ ☞ Ultra-Fast Reverse Recovery Time : t rr (typ.) = 50 ns ☞ Extensive Characterization of Recovery Parameters ☞ Reduced EMI and RFI ☞ Isolation Type Package Applications Motor Drives, Free wheel use, High Power Converters, Welders, Various Switching and Telecommunication Power Supply. Absolute Maximum Ratings @ T j =25℃(Per Leg) Symbol Parameter Ratings Unit Conditions V RRM V R(DC) I F(AV) I FSM I 2 t T j T stg V isol P d - - - Repetitive Peak Reverse Voltage Reverse DC Voltage Average Forward Current @ Tc = 25℃ @ Tc = 100℃ Surge(non-repetitive) Forward Current I 2 t for Fusing Junction Temperature Storage Temperature Isolation Voltage Maximum Power Dissipation Mounting Torque Terminal Torque Weight Resistive Load One Half Cycle at 60Hz, Peak Value Value for One Cycle Current, t w = 8.3ms, T j = 25℃ Start @ AC 1 minutes Typical Including Screws 300 240 200 100 2000 7.1* 10 3 -40 ~ 150 -40 ~ 125 2500 275 1.45 1.45 30 V V A A A A 2 s ℃ ℃ V W N.m N.m g 1/4 Equivalent Circuit and Package Package : SOT-227 Please see the package Out line information Ultra-Fast Soft Recovery Diode Module E301932
Transcript of Ultra-Fast Soft Recovery Diode Module · ☞Repetitive Reverse Voltage : VRRM= 300V ☞Low Forward...
Copyright@Dawin Electronics Corp. All right reserved
DWM2F100N030Apr. 2006
DescriptionUltra-FRD module devices are optimized to reduce losses and EMI/RFI in high frequency power conditioning electrical systems. These diode modules are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses.
Features☞ Repetitive Reverse Voltage : VRRM = 300V☞ Low Forward Voltage Drop : VF(typ.) = 1.35V ☞ Average Forward Current : IF(AV.) = 100A @ Tc = 100℃☞ Ultra-Fast Reverse Recovery Time : trr(typ.) = 50 ns ☞ Extensive Characterization of Recovery Parameters☞ Reduced EMI and RFI☞ Isolation Type Package
ApplicationsMotor Drives, Free wheel use, High Power Converters, Welders, Various Switching and Telecommunication Power Supply.
Absolute Maximum Ratings @ Tj=25℃(Per Leg)
Symbol Parameter Ratings UnitConditions
VRRMVR(DC)IF(AV)
IFSM
I2t
TjTstgVisolPd---
Repetitive Peak Reverse VoltageReverse DC VoltageAverage Forward Current @ Tc = 25℃
@ Tc = 100℃Surge(non-repetitive) Forward CurrentI2t for Fusing
Junction TemperatureStorage TemperatureIsolation VoltageMaximum Power DissipationMounting TorqueTerminal TorqueWeight
Resistive Load
One Half Cycle at 60Hz, Peak ValueValue for One Cycle Current, tw = 8.3ms, Tj = 25℃ Start
@ AC 1 minutes
Typical Including Screws
3002402001002000
7.1* 103
-40 ~ 150-40 ~ 125
25002751.451.4530
VVAAA
A2s
℃℃VWN.mN.mg
1/4
Equivalent Circuit and Package
Package : SOT-227
Please see the package Out line information
Ultra-Fast Soft Recovery Diode Module
E301932
Copyright@Dawin Electronics Corp. All right reserved
DWM2F100N030Apr. 2006
Thermal Characteristics
Symbol ParameterValues
UnitConditions
Rth(j-c) Thermal Resistance Junction to Case
Min. Typ. Max.
0.45 ℃/W- -
Electrical Characteristics @ Tj=25℃ (unless otherwise specified)
Symbol ParameterValues
UnitConditions
VR
VFM
IRRM
Trr
Cathode Anode Breakdown Voltage Maximum Forward Voltage
Repetitive Peak Reverse CurrentReverse Recovery Time
IR = 100uA
IFM = 100A, Tc = 25℃IFM = 100A, Tc =100℃TC = 100℃, VRRM applied
IFM = 100A, VR = 200V di/dt=-100A/us
Min. Typ. Max.
-
1.61.41.0
75
-
V
VV
mA
ns
ns
300
---
-
-
-
1.351.1-
50
80
Tc = 25℃
Tc = 100℃
2/4
Copyright@Dawin Electronics Corp. All right reserved
DWM2F100N030Apr. 2006
Performance Curves
Fig. 1 : Typical Forward Voltage Dropvs. Instantaneous Forward Current
Fig. 2 : Typical Reverse Recovery Timevs. -di/dt
Fig. 3 : Transient Thermal Impedance(Zthjc)Characteristics
3/4
1
10
100
1000
0 0.5 1 1.5 2 2.5
Forw ard Voltage Drop VF[V]
Forw
ard
Curre
nt IF
[A]
0.001
0.01
0.1
1
1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00
Rectangular Pulse Duration[sec]
Ther
mal
Resp
once
Zth
jc[℃/w
]
20
30
40
50
60
100 1000
di/dt[A/us]
Reve
rse R
eco
very
Tim
e,t
rr,[
ns]
0
20
40
60
80
100
120
60 80 100 120 140 160
Fig. 4 : Forward Current Derating Curve
Case Temperature Tc[℃]
Avera
ge F
orw
ard
Curr
ent I F
(AVG
) [A]
DC
Copyright@Dawin Electronics Corp. All right reserved
DWM2F100N030Apr. 2006
Package Out Line Information
4/4
Dimensions in mmSOT-227
