UF II IMPLANT ver 01 201504
-
Upload
dio-implant-taiwan -
Category
Documents
-
view
230 -
download
6
description
Transcript of UF II IMPLANT ver 01 201504
Digital Implant No.1
UFⅡ Implant Product Catalog
02 03
ContentsImplant SurfaceHSA
NarrowSystem Flow ChartSurgical Kit
Surgical Protocol
Regular / WideSystem Flow ChartSurgical KitSurgical Protocol
04
07
08
13
15
16
19
35
44
UFⅡ Implant Product Catalog
02 03
UFⅡ Implant Product Catalog
04 05
HSA Hybrid SLA
Apply the optimal morphologyand roughness for osseointegration
UFⅡ Implant Product Catalog
04 05
11˚ 30˚
A
B
Upper / Micro Surface
Body / Macro + Micro Surface
Minimize Peri-Implantitis
Stimulate OsseointegrationLess friction around cortical bonepromotes less bone loss.
with ideal Ra.2.0~2.5㎛ promotes not only rapidosseointegration but also long-term statibility.
Ra : 0.5~1.0㎛
Ra : 2.0~2.5㎛
Advanced Surface Modification Techniquesfor Enhancing Osseointegration of Titanium ImplantDepartment of dental materials, School of Dentistry, Chonnam University. Ho-jun Song, PhD
Titanium oxide lm is typically consist of TiO, TiO3, TiO2. The most stable form is TiO2.Size of 1~10um, micro scale of roughness stimulates attachment and separation of osteoblast and accelerates building ofextracellular matrix(ECM) and mineralization which helps to create faster osseointegration reaction.Rough surfaces increase coherence between surface of implant and mineralized bone. Hansson S, Norton M. theoreticalapproached and has reported that depth of 1.5um, 3~5um in diameter hemisphere pit is ideal for perfect roughness.
1) Abron A, Hopfensperger M, Thompson J, Cooper LF. Evaluation of a predictive model for implant surface topofraphy effects on early osseointefration in the rat tibia model. J Prosthet Dent 2001;85:40-6.
2) Hansson S, Norton M. The relation between surface roughness and interfacial shear strength for bone-anchored implant.A mathematical model. Journal of Biomechanics 1999;32(8):829-836.
→ Easy to hold fixture completely by turning ampoule, not handpiece.
Fixture Driver Using Manual
1/ UF(II) Fixture Driver 2/ Recommendation
IdentifyHex Side
Check Implantationdepth (1mm)
① Open the paper seal of the fixture ※Put the chart sticker at the back of the paper seal into the form.② Pull the transparent window containing fixture into the arrow direction indicated on the ampoule body side and open it about 30 degree. ③ Remove the ampoule cap and turn it inducing complete connection with fixture driver.④ Take fixture out after confirming complete connection.
※Move ampoule slowly to connect fixture completely.
① Open the transparent window containing fixture almost horizontally against ampoule body② Shake the window left to right and completely detach ampoule body.③ It is easy to use when detached.
Turn the hex driver counterclockwise(screw loosening direction) and take it out.
Move ampoule from side to side Move handpiece from side to side
Perfact connection Wrong connection
Package Using Manual
1/ Taking out fixture
UFⅡ Implant Product Catalog
06
· Recommended freguency of use : 20times· Maxinum tightening torque : 50Ncm
① Open the paper seal of the fixture ※Put the chart sticker at the back of the paper seal into the form.② Pull the transparent window containing fixture into the arrow direction indicated on the ampoule body side and open it about 30 degree. ③ Remove the ampoule cap and turn it inducing complete connection with fixture driver.④ Take fixture out after confirming complete connection.
3/ Taking out cover screw
A cover screw could slip down so please be careful when you remove the cap.
▶
2/ Separating out ampoule
① Open the transparent window containing fixture almost horizontally against ampoule body② Shake the window left to right and completely detach ampoule body.③ It is easy to use when detached.
▶
▶ ▶ ▶
※Move ampoule slowly to connect fixture completely.
07
Narrow
11˚ 30˚
A
B
11˚ 30˚
A
B
11˚ 30˚
A
B
Morse Tapered Connection 11°
1.7 Hex
Upper Thread
Straight Body
Apical Design
ø 3.0 ø 3.3
Open Thread
Cutting Edge
The Fixture & abutment interface ensures hermetic sealing.This distributes the loadto the fixture evenly.Therefore, it minimizes bone loss.
Taper thread, Initial fixation
Decrement of bone damage
15° Taper guide gradually
Fixture placement withminimum resistance.Possible to place deeperwithout drilling.
Maximize the efficiency ofself-tapping with a sharp edge.
Uppe
rBo
dy2.
5mm
Diameter : Ø3.0 / Ø3.3Lenght : 8.5 / 10 / 11.5 / 13 / 15Ø3.0 Fixture : Exclusive use of Anterior tooth
UFⅡ Implant Product Catalog
08 09
Cement-Retained Restorations
Temporary / Cemented / Angled Abutment
Abutment Screw
Fixture Analog
UF(II)Narrow Fixture Cover Screw Healing Abutment
Temporary
Pick-up Impression Coping
AngledCemented
Transfer Impression Coping
Abutment
System Flow Chart
UFⅡ Implant Product Catalog
08 09
Cement-Retained Restorations
Solid Abutment
Overdenture-Retained Restorations
Ball Abutment
UF(II)Narrow Fixture Cover Screw Healing Abutment
Bridge
Protect Cap
Single
Solid Abutment
Plastic Coping
Stainless Steel Housing
OT Cap
Ball Abutment Analog
Ball Abutment
Solid Abutment Analog
Impression Cap
UFⅡ Implant Product Catalog
10 11
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
UF(II) Narrow Fixture HSAHex Length Ø3.0 Ø3.3
1.7
8.5 UF(ll)N 3008S UF(ll)N 3308S10 UF(ll)N 3010S UF(ll)N 3310S
11.5 UF(ll)N 3011S UF(ll)N 3311S13 UF(ll)N 3013S UF(ll)N 3313S15 UF(ll)N 3015S UF(ll)N 3315S
Apex Ø1.6 Ø1.9
· Ø3.0 Fixture : Exclusive use of Anterior tooth· HSA (Hybrid SLA) · Packing Unit : Fixture + Cover Screw
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Temporary Abutment
· Packing unit : Abutment + Abutment Screw (UNSAS 1407H) · Tightening torque : 20Ncm
CuffØ4.0
Hex (Guide Pin) Non-Hex
1 UNSTA 4010H UNSTA 4010N3 UNSTA 4030H UNSTA 4030N
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Cover ScrewCuff 0 1 2 3
Code UNSCS 2700 UNSCS 2710 UNSCS 2720 UNSCS 2730
· Uses 1.2 Hex Driver · Tightening torque : 5 ~ 8Ncm
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Height Cuff Ø4.1 Ø4.2 Ø4.6 Ø4.7
2 0 UNSHA 4020 UNSHA 45204 2 UNSHA 4024 UNSHA 4524
5.5 3 UNSHA 4035 UNSHA 45357 4 UNSHA 4047 UNSHA 4547
8.5 5 UNSHA 4058 UNSHA 455810 6 UNSHA 4060 UNSHA 4560
· Uses 1.2 Hex / 0.5 Slot Driver · Tightening torque : 5 ~ 8Ncm
Healing Abutment
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Cemented Abutment
· Packing unit : Abutment + Abutment Screw (UNSAS 1407H) · Tightening torque : 20Ncm
CuffØ4.0
Hex Non-HexL 5.5 L 7 L 5.5 L 7
1 UNSCA 40105H[H] UNSCA 40107H[H] UNSCA 40105N[H] UNSCA 40107N[H]2 UNSCA 40205H[H] UNSCA 40207H[H] UNSCA 40205N[H] UNSCA 40207N[H]3 UNSCA 40305H[H] UNSCA 40307H[H] UNSCA 40305N[H] UNSCA 40307N[H]4 UNSCA 40405H[H] UNSCA 40407H[H] UNSCA 40405N[H] UNSCA 40407N[H]5 UNSCA 40505H[H] UNSCA 40507H[H] UNSCA 40505N[H] UNSCA 40507N[H]6 UNSCA 40605H[H] UNSCA 40607H[H] UNSCA 40605N[H] UNSCA 40607N[H]7 UNSCA 40705H[H] UNSCA 40707H[H] UNSCA 40705N[H] UNSCA 40707N[H]
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
DØ2
.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
UFⅡ Implant Product Catalog
10 11
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Transfer Impression Coping
Cuff LengthØ4.0
Hex (Guide Pin) Non-Hex
2 13 UNSTI 4013H (UNSTI 4013S) UNSTI 4013N4 15 UNSTI 4015H (UNSTI 4015S) UNSTI 4015N6 17 UNSTI 4017H (UNSTI 4017S) UNSTI 4017N
· Packing unit : Transfer Impression Coping + Guide Pin
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Pick Up Impression Coping
Cuff LengthØ4.0
Hex (Guide Pin) Non-Hex
2 12 UNSPI 4012H (UNSSG 1422) UNSPI 4012N (UNSSG 1422)
4 14 UNSPI 4014H (UNSSG 1422) UNSPI 4014N (UNSSG 1422)
6 16 UNSPI 4016H (UNSSG 1425) UNSPI 4016N (UNSSG 1425)
· Packing unit : Impression Coping + Guide Pin
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Fixture AnalogLength Ø3.0
12 UNSFA 3012
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Solid Abutment
· Packing unit : Abutment + Protect Cap · Tightening torque : 20Ncm
CuffØ4.0
L 5.5 L 7
1 UNSSA 40105 UNSSA 401072 UNSSA 40205 UNSSA 402073 UNSSA 40305 UNSSA 403074 UNSSA 40405 UNSSA 404075 UNSSA 40505 UNSSA 405076 UNSSA 40605 UNSSA 406077 UNSSA 40705 UNSSA 40707
Protect Cap UNSAC 4005 UNSAC 4007
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Angled Abutment
· Packing unit : Abutment + Abutment Screw (UNSAS 1407H)· Tightening torque : 20Ncm
CuffØ4.0
Hex B Non-Hex
2 UNSAA 402015BH[H] UNSAA 402015N[H]4 UNSAA 404015BH[H] UNSAA 404015N[H]
UFⅡ Implant Product Catalog
12 13
Ball Abutment AnalogLength Ø4.0
10 UNSBAA 3510
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Solid Abutment AnalogLength Ø4.0
5.5 UNSSAA 40057 UNSSAA 4007
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Impression CapLength Ø4.0
11 UNSAI 4011
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
OT CapLength Ø4.2
2.6 049PCNDR8
· Packing unit : 6 Piece
Stainless Steel HousingLength Ø4.6
3 041CAN
· Packing unit : 2 Piece
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Ball AbutmentLength Ø4.0
1 UNSBA 35102 UNSBA 35203 UNSBA 35304 UNSBA 35405 UNSBA 35506 UNSBA 35607 UNSBA 3570
· Packing unit : Ball Abutment + Abutment Holder· Tightening torque : 20Ncm
Plastic CopingLength Ø4.0
10UNSAP 4010S Single (Red)
UNSAP 4010B Bridge (White)
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
UFⅡ Implant Product Catalog
12 13
UF(II) Narrow Surgical Kit
DSU
2708
M
DSU
27xx
M
Ø2.0
Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth GaugeOrder Code : DPG 2050
Torque Wrench
*Bottom Case
Order Code : DTW 0060
Starter DrillOrder Code : SD 1530M
Initial DrillOrder Code : DHF 2015SM
Tap DrillOrder Code : UNTD 3015 · UNTD 3315
1.2 Hex Screw DriverOrder Code : MD 1230 · HD 1220A
Fixture DriverOrder Code : UNFDC 3006* · UNFDW 3006* UNFDC 3012 · UNFDW 3012 UNFDC 3018 · UNFDW 3018
Parallel PinOrder Code : PP 2022 · PP 2023
DrillOrder Code : DSU 2708M · DSU 2710M DSU 2711M · DSU 2713M
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DSU 2008M DSU 2010M DSU 2011M DSU 2013M
Initial Drill
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : MHDC 2520 MHDR 2513A
Mount Driver
Order Code : UNTD 3015 UNTD 3315
Tap Drill
Order Code : FDC 3506 · FDW 3512A FDC 3512 · FDW 3518A
Fixture Driver
Order Code : DE 3507MDrill Extension
Order Code : HDS 4506A · HDS 5506A · HDS 6506A HDS 4512A · HDS 5512A · HDS 6512A
Solid Abutment Driver
Order Code : UNFDC 3012 UNFDC 3018
for UF(II) Narrow
for UF(II) Regular/Wide
Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : MD 1230 HD 1215A
Screw Driver
Order Code : HD 2412ABall Abutment Driver
Order Code : HARD 20315AAbutment Removing Driver
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : DSU 5007 · DSU 5507 · DSU 6007 DSU 5008 · DSU 5508 · DSU 6008 DSU 5010 · DSU 5510 · DSU 6010 DSU 5011 · DSU 5511 · DSU 6011
Final DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DHF 2015SMST 2008F · ST 2010FST 2011F · ST 2013F
Initial Drill
Ø2.0
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DE 3507MDrill Extension
Order Code : FDC 3506 · FDC 3512 FDW 3512A · FDW 3518A
Fixture DriverOrder Code : MD 1230 · HD 1215AScrew Driver
Order Code : UT(II) 6006 · UT(II) 6506 · UT(II) 7006Tap Drill
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050 Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050
Order Code : TRD 4739 TRD 5244 TRD 5749
Trephine DrillOrder Code : FDC 3506 · FDW 3506A FDC 3512 · FDW 3512A
Fixture Driver
Order Code : UPD 6010 · UPD 6510 · UPD 7010Profile Drill
Order Code : UNFDC 3012 UNFDC 3018Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : UNTD 3015 · UNTD 3315Tap Drill
for UF(II) Narrow for UF(II) Regular/Wide
· Recommended freguency of use : 20 times· Maxinum torque : 50Ncm*Option) Available
Order Code : UF(M) 08
UFⅡ Implant Product Catalog
14 15
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Starter DrillL1 / L2 Ø1.5
30/15 SD 1530M
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Tap DrillL1 / L2 Ø3.0 Ø3.3
33 / 8.5 UNTD 3015 UNTD 3315
1.2 Hex Screw Driver Length Ø3.0 Ø3.3
16 MD 123020 HD 1220A
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Fixture Driver
*Option) Available · Recommended freguency of use : 20times· Maxinum tightening torque : 50Ncm
LengthØ3.0 / Ø3.3
Machine Ratchet
6 UNFDC 3006* UNFDW 3006*12 UNFDC 3012 UNFDW 301218 UNFDC 3018 UNFDW 3018
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Initial DrillL1 / L2 Ø2.0
34.5 / 17.5 DHF 2015SMD
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
Parallel PinL1 / L2 Ø2.0 / Ø2.7
22 / 10 PP 202223 / 16 PP 2023
D
C
Hex Non-Hex
D
C
L
Hex Non-Hex
FixtureLevel
FixtureLevel
Drill
33 / 8.5
33 / 10
33 / 11.5
33 / 13
L1 / L2 Dia.
DSU 2708M
DSU 2710M
DSU 2711M
DSU 2713M
Ø2.7L1 / L2
Starter Drill
30 / 15
Dia.
SD 1530M
Ø1.5 L1 / L2
Initial Drill
34.5 / 17.5
Dia.
DHF 2015SM
Ø2.0
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L1 / L2
Parallel PinD1 / D2 Ø2.0 / Ø2.7
22/10 PP 2022
PP 202323/16
1.2 Hex Screw Driver
16
20
Length Type Machine Ratchet
-
-
MD 1230
HD 1220A
L
L
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
Hex 1.2
C
Apex Apex
Hex 1.7 Hex 1.7
L
Ø3.3Ø3.0
FixtureLevel
DHex 1.2
C
Diameter
Cuff/Height
H
0.5Ø4.2
C6H10
FixtureLevel
C
L
Hex Non-Hex
D
FixtureLevel
C
15°
Hex Non-Hex
D
FixtureLevel
C
L
FixtureLevel
Hex Non-Hex
D
L
D
Tap Drill
Code
Diameter
UNTD 3015 UNTD 3315
Ø3.0 Ø3.3
Fixture Driver
6
12
18
Length Type Machine Ratchet
Diameter
UNFDC 3006
UNFDC 3012
UNFDC 3018
UNFDW 3006
UNFDW 3012
UNFDW 3018
Ø3.0 / Ø3.3
Option) Available(별매품)
L
L
L
D
D
D
CFixtureLevel
D
Torque Wrench
*Bottom Case
DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth Gauge DPG 2050
D
D
C
L
FixtureLevel
1.2 Hex
L
D
L
D
L
D
L2
L1
D
L2
0.5
L1
D
Ø2.0
78.5
1011.5
1315
L1
L2
D1
D2
8.57
DSU
2708
M
L2
0.5
L1
D
DSU
27xx
M
L
L
DrillL1 / L2 Ø2.7
33 / 8.5 DSU 2708M33 / 10 DSU 2710M
33 / 11.5 DSU 2711M33 / 13 DSU 2713M
UFⅡ Implant Product Catalog
14 15
Narrow Fixture Surgical Protocol
4mm
1.5mm
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Starter Drill1,200rpm
Drill800rpm
Initial Drill1,000rpm
Tap Drill50rpm
UF(ll) NarrowFixture20rpm
Tap Drill
· Recommended torque : 20 ~ 40Ncm· Not exceed 50Ncm
UFⅡ Implant Product Catalog
16 17
Regular
11˚ 30˚
A
B
11˚ 30˚
A
B
11˚ 30˚
A
B
Morse Tapered Connection 11°The Fixture & Abutment interface ensures hermetic sealing.This distributes the loadto the fixture evenly.Therefore, it minimizes bone loss.
Open ThreadFixture placement with minimum resistance.Possible to place deeperwithout drilling.
Upper ThreadTaper thread, Initial fixation
Taper thread on straight body disperse the stress of upper part of implant.
The depth of the thread getting lower toward the top improves blood supply
and lessens the empty space in cortical bone to reduce if the time to
create new bone.
Straight BodyDecrement of bone damage
Body part gets longer for long size implant which allows stable
implantation without sharp change.
Apical Design15° Taper guide gradually
With under drilling in weak bone, innitial insertion goes well as apex
has 15° taper design.
Cutting EdgeMaximize the efficiency ofself-tapping with a sharp edge.
Uppe
rBo
dy2.
5mm
2.5 Hex
Diameter : Ø3.8 / Ø4.0 / Ø4.5 / Ø5.0 / Ø5.5Lenght : 7 / 8.5 / 10 / 11.5 / 13
UFⅡ Implant Product Catalog
16 17
Wide
11˚ 30˚
A
B
Cutting edgeMaximize the efficiency ofself-tapping with a sharp edge.
Platform Switching Design
Conical Seal ConnectionTaper 11˚ Hex 2.5compatible with UF(II) Regular prosthetics.
Open threadFixture placement with minimum resistance.Possible to place deeperwithout drilling.
Body threadUF(II) Body Thread design
· Length 6.5 Fixture : Exclusive use of posterior
Diameter : Ø6.0 / Ø6.5 / Ø7.0Lenght : 6.5 / 7 / 8.5 / 10 / 11.5Length 6.5 Fixture : Exclusive use of posterior
UFⅡ Implant Product Catalog
18 19
Regular / Wide
Cement-Retained RestorationsTemporary / Cemented / Mill / Angled Abutment
Screw-Retained RestorationsUCLA Gold / CCM / UCLA Plastic Abutment
Abutment Screw
Fixture Analog
UF(II)RegularFixture
UF(II)Wide
Fixture
Cover Screw Healing Abutment
Pick-up Impression Coping Transfer Impression Coping
Abutment
TemporaryAngled UCLA PlasticUCLA Gold/CCMMillCemented
UFⅡ Implant Product Catalog
18 19
Cement-Retained RestorationsSolid Abutment
Overdenture-Retained RestorationsBall Abutment
UF(II)RegularFixture
UF(II)Wide
Fixture
Cover Screw Healing Abutment
Bridge
Protect Cap
Single
Solid Abutment
Plastic Coping
OT Cap Dalbo Plus MaleRetainer Ball Cap
Ball Abutment Analog
Ball Abutment Locator
Solid Abutment Analog
Impression Cap
O-Ring StainlessSteel Housing
Denture Cap
System Flow Chart
UFⅡ Implant Product Catalog
20 21
Screw-Retained RestorationsOcta Abutment
Cylinder Screw
Octa Abutment Analog
UF(II)RegularFixture
UF(II)Wide
Fixture
Cover Screw Healing Abutment
Octa Abutment
Pick-up Impression Coping
Healing Cap
Transfer Impression Coping
Regular / Wide
Gold Cylinder Plastic CylinderCemented Cylinder Temporary Cylinder
UFⅡ Implant Product Catalog
20 21
Screw-Retained RestorationsConical / Multiunit Abutment
UF(II)RegularFixture
UF(II)Wide
Fixture
Cover Screw Healing Abutment
System Flow Chart
Cylinder Screw
Conical Abutment Analog
Plastic CylinderGold Cylinder
Pick-up Impression Coping
Temporary Cylinder
Multiunit Abutment
Transfer Impression Coping
Conical AbutmentHealing Cap
UFⅡ Implant Product Catalog
22 23
2.5Hex
D
L
Apex
Apex
D
2.5Hex
L
Apex
D
2.5Hex
L
Apex
2.5Hex
D
L
Apex
2.5Hex
D
L
Apex
D
2.5Hex
L
Apex
D
L
Apex
D
2.5Hex
L
2.5Hex
D
L
Apex
Apex
D
2.5Hex
L
Apex
D
2.5Hex
L
Apex
2.5Hex
D
L
Apex
2.5Hex
D
L
Apex
D
2.5Hex
L
Apex
D
L
Apex
D
2.5Hex
L
UF(II) Regular Fixture
UF(II) Wide Fixture
Hex Length Ø6.0 Ø6.5 Ø7.0
2.5
6.5 UF(ll) 6006S UF(ll) 6506S UF(ll) 7006S7 UF(ll) 6007S UF(ll) 6507S UF(ll) 7007S
8.5 UF(ll) 6008S UF(ll) 6508S UF(ll) 7008S10 UF(ll) 6010S UF(ll) 6510S UF(ll) 7010S
11.5 UF(ll) 6011S UF(ll) 6511S UF(ll) 7011SApex Ø5.4 Ø5.9 Ø6.4
Hex Length Ø3.8 Ø4.0 Ø4.5 Ø5.0 Ø5.5
2.5
7 - - UF(ll) 4507S UF(ll) 5007S UF(ll) 5507S8.5 UF(ll) 3808S UF(ll) 4008S UF(ll) 4508S UF(ll) 5008S UF(ll) 5508S10 UF(ll) 3810S UF(ll) 4010S UF(ll) 4510S UF(ll) 5010S UF(ll) 5510S
11.5 UF(ll) 3811S UF(ll) 4011S UF(ll) 4511S UF(ll) 5011S UF(ll) 5511S13 UF(ll) 3813S UF(ll) 4013S UF(ll) 4513S UF(ll) 5013S UF(ll) 5513S
Apex Ø2.1 Ø2.2 Ø2.6 Ø3.1 Ø3.7
· Length 6.5 Fixture : Exclusive use of posterior
UFⅡ Implant Product Catalog
22 23
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Cover Screw
Cuff Code
0 SSCS 34001 SSCS 34102 SSCS 34203 SSCS 3430
· Uses 1.2 Hex / 0.5 Slot Driver · Tightening torque : 5 ~ 8Ncm· Used for narrow area after the Implant surgery or to protect Implant connection area. Screw installation after removing the remaining blood or foreign substance in Implant.
· Uses 1.2 Hex / 0.5 Slot Driver · Used in prosthetic fabrication · Packing Unit : Abutment + Abutment Screw (SSC 2008H)· Tightening torque : 30 ~ 35Ncm
CuffØ4.5
Hex Non Hex
1 SSTA 4510H[H] SSTA 4510N[H]3 SSTA 4530H[H] SSTA 4530N[H]
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Cuff Ø4.0
2 SSHA 40204 SSHA 40406 SSHA 40608 SSHA 4080
· Suitable for a small diameter abutment like a Ball Abutment.· Recommended to use it when Fixture is deeply inserted.· Uses 1.2 Hex / 0.5 Slot Driver ·Tightening torque: 5 ~ 8Ncm
· Uses 1.2 Hex / 0.5 Slot Driver · Tightening torque : 5 ~ 8Ncm· Used after the one-stage surgery or second-stage surgery and it takes the role which forms the gingiva and it helps to form the gingiva to make an emergency prole. - Choices available depend on the patient’s height of gingiva and the size of abutment. (Healing Abutment should have wider diameter than the desired abutment. That way the abutment will be installed without interruption from the gingival and the balance of the nalized prosthesis will be ensured.)
Healing Abutment
Height CuffD1 - Ø4.6 D1 - Ø5.6 D1 - Ø6.6 D1 - Ø7.6D2 - Ø4.5 D2 - Ø5.5 D2 - Ø6.5 D2 - Ø7.5
2 0 SSHA 4520 SSHA 5520 SSHA 6520 SSHA 75204 2 SSHA 4524 SSHA 5524 SSHA 6524 SSHA 7524
5.5 3 SSHA 4535 SSHA 5535 SSHA 6535 SSHA 75357 4 SSHA 4547 SSHA 5547 SSHA 6547 SSHA 7547
Height CuffD1 - Ø8.2 D1 - Ø9.2D2 - Ø8.0 D2 - Ø9.0
2 1 SSHA 8212 SSHA 92123 2 SSHA 8223 SSHA 92234 3 SSHA 8234 SSHA 92345 4 SSHA 8245 SSHA 9245
Temporary Abutment
UFⅡ Implant Product Catalog
24 25
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Cemented Abutment
Hex Type
Non-Hex Type
· Used to make ordinary cement type prosthesis.· For the esthetics, gingiva area is colored in gold.· To prevent rotation of prosthesis it has a at side.· Uses 1.2 Hex driver· Packing Unit : Abutment + Abutment Screw (SSC 2008H) ※Ø4.5 Abutment (SSC 2008SH)· Tightening torque : 30 ~ 35Ncm· Compatitable with Solid Abutment Impression Cap
Length Cuff Ø4.5 Ø5.5 Ø6.5 Ø7.5
4
1 SSCA 45104H(ll)[H] SSCA 55104H(ll)[H] SSCA 65104H(ll)[H] SSCA 75104H(ll)[H]2 SSCA 45204H(ll)[H] SSCA 55204H(ll)[H] SSCA 65204H(ll)[H] SSCA 75204H(ll)[H]3 SSCA 45304H(ll)[H] SSCA 55304H(ll)[H] SSCA 65304H(ll)[H] SSCA 75304H(ll)[H]4 SSCA 45404H(ll)[H] SSCA 55404H(ll)[H] SSCA 65404H(ll)[H] SSCA 75404H(ll)[H]5 SSCA 45504H(ll)[H] SSCA 55504H(ll)[H] SSCA 65504H(ll)[H] SSCA 75504H(ll)[H]
5.5
1 SSCA 45105H(ll)[H] SSCA 55105H(ll)[H] SSCA 65105H(ll)[H] SSCA 75105H(ll)[H]2 SSCA 45205H(ll)[H] SSCA 55205H(ll)[H] SSCA 65205H(ll)[H] SSCA 75205H(ll)[H]3 SSCA 45305H(ll)[H] SSCA 55305H(ll)[H] SSCA 65305H(ll)[H] SSCA 75305H(ll)[H]4 SSCA 45405H(ll)[H] SSCA 55405H(ll)[H] SSCA 65405H(ll)[H] SSCA 75405H(ll)[H]5 SSCA 45505H(ll)[H] SSCA 55505H(ll)[H] SSCA 65505H(ll)[H] SSCA 75505H(ll)[H]
7
1 SSCA 45107H(ll)[H] SSCA 55107H(ll)[H] SSCA 65107H(ll)[H] SSCA 75107H(ll)[H]2 SSCA 45207H(ll)[H] SSCA 55207H(ll)[H] SSCA 65207H(ll)[H] SSCA 75207H(ll)[H]3 SSCA 45307H(ll)[H] SSCA 55307H(ll)[H] SSCA 65307H(ll)[H] SSCA 75307H(ll)[H]4 SSCA 45407H(ll)[H] SSCA 55407H(ll)[H] SSCA 65407H(ll)[H] SSCA 75407H(ll)[H]5 SSCA 45507H(ll)[H] SSCA 55507H(ll)[H] SSCA 65507H(ll)[H] SSCA 75507H(ll)[H]
Screw SSC 2008SH SSC 2008H SSC 2008H SSC 2008H
Length Cuff Ø4.5 Ø5.5 Ø6.5 Ø7.5
4
1 SSCA 45104N(ll)[H] SSCA 55104N(ll)[H] SSCA 65104N(ll)[H] SSCA 75104N(ll)[H]2 SSCA 45204N(ll)[H] SSCA 55204N(ll)[H] SSCA 65204N(ll)[H] SSCA 75204N(ll)[H]3 SSCA 45304N(ll)[H] SSCA 55304N(ll)[H] SSCA 65304N(ll)[H] SSCA 75304N(ll)[H]4 SSCA 45404N(ll)[H] SSCA 55404N(ll)[H] SSCA 65404N(ll)[H] SSCA 75404N(ll)[H]5 SSCA 45504N(ll)[H] SSCA 55504N(ll)[H] SSCA 65504N(ll)[H] SSCA 75504N(ll)[H]
5.5
1 SSCA 45105N(ll)[H] SSCA 55105N(ll)[H] SSCA 65105N(ll)[H] SSCA 75105N(ll)[H]2 SSCA 45205N(ll)[H] SSCA 55205N(ll)[H] SSCA 65205N(ll)[H] SSCA 75205N(ll)[H]3 SSCA 45305N(ll)[H] SSCA 55305N(ll)[H] SSCA 65305N(ll)[H] SSCA 75305N(ll)[H]4 SSCA 45405N(ll)[H] SSCA 55405N(ll)[H] SSCA 65405N(ll)[H] SSCA 75405N(ll)[H]5 SSCA 45505N(ll)[H] SSCA 55505N(ll)[H] SSCA 65505N(ll)[H] SSCA 75505N(ll)[H]
7
1 SSCA 45107N(ll)[H] SSCA 55107N(ll)[H] SSCA 65107N(ll)[H] SSCA 75107N(ll)[H]2 SSCA 45207N(ll)[H] SSCA 55207N(ll)[H] SSCA 65207N(ll)[H] SSCA 75207N(ll)[H]3 SSCA 45307N(ll)[H] SSCA 55307N(ll)[H] SSCA 65307N(ll)[H] SSCA 75307N(ll)[H]4 SSCA 45407N(ll)[H] SSCA 55407N(ll)[H] SSCA 65407N(ll)[H] SSCA 75407N(ll)[H]5 SSCA 45507N(ll)[H] SSCA 55507N(ll)[H] SSCA 65507N(ll)[H] SSCA 75507N(ll)[H]
Screw SSC 2008SH SSC 2008H SSC 2008H SSC 2008H
UFⅡ Implant Product Catalog
24 25
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Mill Abutment
Hex Type
Angled Abutment
Cuff Ø4.0 Ø4.5 Ø5.5 Ø6.5 Ø7.5
4 SSMA 4015H[H]2 SSMA 4520H[H]
2.5 SSMA 5525H[H]3 SSMA 6530H[H] SSMA 7530H[H]
· Used for when high customization in abutment path and prosthetic margins are needed.· Secure tapered connection construction· Gold colored for aesthetic design· Uses 1.2 Hex Driver· Packing contents : Abutment + Abutment Screw (SSC2008H)· Tightening torque : 30 ~ 35Ncm
Non-Hex TypeCuff Ø4.0 Ø4.5 Ø5.5 Ø6.5 Ø7.5
1.5 SSMA 4015N[H]2 SSMA 4520N[H]
2.5 SSMA 5525N[H]3 SSMA 6530N[H] SSMA 7530N[H]
Angled TypeØ4.5
1.5 2 3 4 5
15˚
Hex A SSAA 451515AH[H] SSAA 452015AH[H] SSAA 453015AH[H] SSAA 454015AH[H] SSAA 455015AH[H]Hex B SSAA 451515BH[H] SSAA 452015BH[H] SSAA 453015BH[H] SSAA 454015BH[H] SSAA 455015BH[H]
Non-Hex SSAA 451515N[H] SSAA 452015N[H] SSAA 453015N[H] SSAA 454015N[H] SSAA 455015N[H]
25˚
Hex A SSAA 451525AH[H] SSAA 452025AH[H] SSAA 453025AH[H] SSAA 454025AH[H] SSAA 455025AH[H]Hex B SSAA 451525BH[H] SSAA 452025BH[H] SSAA 453025BH[H] SSAA 454025BH[H] SSAA 455025BH[H]
Non-Hex SSAA 451525N[H] SSAA 452025N[H] SSAA 453025N[H] SSAA 454025N[H] SSAA 455025N[H]
Angled TypeØ5.5
1.5 2 3 4 5
15˚
Hex A SSAA 551515AH[H] SSAA 552015AH[H] SSAA 553015AH[H] SSAA 554015AH[H] SSAA 555015AH[H]Hex B SSAA 551515BH[H] SSAA 552015BH[H] SSAA 553015BH[H] SSAA 554015BH[H] SSAA 555015BH[H]
Non-Hex SSAA 551515N[H] SSAA 552015N[H] SSAA 553015N[H] SSAA 554015N[H] SSAA 555015N[H]
25˚
Hex A SSAA 551525AH[H] SSAA 552025AH[H] SSAA 553025AH[H] SSAA 554025AH[H] SSAA 555025AH[H]Hex B SSAA 551525BH[H] SSAA 552025BH[H] SSAA 553025BH[H] SSAA 554025BH[H] SSAA 555025BH[H]
Non-Hex SSAA 551525N[H] SSAA 552025N[H] SSAA 553025N[H] SSAA 554025N[H] SSAA 555025N[H]
· Used to modify the xture’s path and mainly used for anterior teeth.· Depending on the angle slope, it is categorized into 15° and 25° Angled Abutment.· Availability of A type and B type of hex part overcomes the limitation of direction of abutment.· For the esthetics, Gingiva area is colored in gold.· Uses 1.2 Hex Driver· Packing contents : Abutment + Abutment Screw (SSC2008H)· Tightening torque : 30 ~ 35Ncm
UFⅡ Implant Product Catalog
26 27
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
UCLA Abutment
Gold Type
CuffØ4.5
Hex Non Hex
1 SSGA 4510H[H] SSGA 4510N[H]3 SSGA 4530H[H] SSGA 4530N[H]
· Screw retained type abutment which uses abutment screw to fix prosthesis.· Can be used when there is limitation on path, esthetics, space etc. (It is directly casted on abutment to make inner part of prosthesis. Due to this aspect, Customized abutment can be made which can be applied to variety of cases. Especially, it is very strong for cases which requires difficult angle modication.)· After the customization, Dental gold metal will be casted with it to make prosthesis.· Melting range on cylinder area : 1400 ~ 1450℃ (Obligation on non-mineral of noble or metal -free alloy Casting)· Depending on the connecting method with fixture, it is categorized as Hex / Non – Hex· Uses 1.2 Hex Driver · Tightening torque : 30 ~ 35Ncm· Packing contents : Abutment + Abutment Screw (SSC2008H)
CCM Type
CuffØ4.0 Ø4.5
Hex Non Hex Hex Non Hex
1 CCSS 4010H[H] CCSS 4010N[H] CCSS 4510H[H] CCSS 4510N[H]3 CCSS 4530H[H] CCSS 4530N[H]
· After the customization, it is casted with dental alloy (Gold / non-precious metal alloy) to make prosthesis.· Depending on the connecting method with fixture, it is categorized as Hex / Non – Hex· Uses 1.2 Hex Driver· Packing Unit : Abutment + Abutment Screw (SSC2008H)· Tightening torque : 30 ~ 35Ncm
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Plastic Type
LengthØ4.5 Ø5.5
Hex Non Hex Hex Non Hex
12 SSPA 4512H[H] SSPA 4512N[H] SSPA 5512H[H] SSPA 5512N[H]
· Its purpose of usage is the same as UCLA Gold Abutment but material for the abutment is plastic.· Compared to UCLA Gold Abutment, its degree of precision or accuracy on connection area with abutment is slightly lower.· After the customization, it is casted with dental alloy (Gold / non-precious metal alloy) to make prosthesis.· Uses 1.2 Hex Driver· Packing contents : Abutment + Abutment Screw (SSC2008H)· Tightening torque : Tightening smoothly before casting, 30 ~ 35Ncm after casting
UFⅡ Implant Product Catalog
26 27
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Transfer Impression Coping
Hex TypeHeight Ø4.0 Ø4.5 Ø5.5 Ø6.5
10 SSTI 4010H SSTI 4510H SSTI 5510H SSTI 6510HGuide Pin SSTI 4015S SSTI 6515S
15 SSTI 4015H SSTI 4515H SSTI 5515H SSTI 6515HGuide Pin SSTI 4020S SSTI 6520S
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Non-Hex TypeHeight Ø4.0 Ø4.5 Ø5.5 Ø6.5
10 SSTI 4010N SSTI 4510N SSTI 5510N SSTI 6510N15 SSTI 4015N SSTI 4515N SSTI 5515N SSTI 6515N
· Ready-made tray is used for transfer type of impression taking.· Double sided structure increases quality.· Hex type is two-piece structure and Non-Hex type is one-piece structure.· Uses 1.2 Hex Driver· Packing contents : Impression Coping + Guide Pin
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Fixture AnalogHeight Ø4.0
12 SSFA 4012
· Providing anchor point for fabricating implant prosthetics on working model.
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Fixture Level
Hex Non-Hex
Cuff
D
C
Hex 1.2
Fixture Level
Hex
Hex Non-Hex
D
C
C
D
Hex Non-Hex
Non-Hex
D
CFixture Level
D
L
D
CFixtureLevel
Hex (A Type)
Hex (BType)
Fixture Level
Fixture Level
Fixture Level
D
L
Fixture Level
Proper connection
Cuff/Height
D
D1
D2
D2
D1
C
Hex 1.2
Cuff
2
Fixture Level
Height
Diameter
H
C
HC
Hex 1.2Ø4.5
H2
Diameter
Hex 1.2C1H2
8.0
Fixture Level
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
L
C
SSC 2008SH SSC 2008H
Ø2.25 Ø2.45
D
Fixture Level
L
C
Fixture Level
Fixture Level
정상적인 체결
Pick up Impression Coping
Hex TypeHeight Ø4.0 Ø4.5 Ø5.5 Ø6.5 Guide Pin
09 SSPI 4009H SSPI 4509H SSPI 5509H SSPI 6509H SSG 202113 SSPI 4013H SSPI 4513H SSPI 5513H SSPI 6513H SSG 202617 SSPI 4017H SSPI 4517H SSPI 5517H SSPI 6517H SSG 232919 SSPI 4019H SSPI 4519H SSPI 5519H SSPI 6519H SSG 2329
Non-Hex Type
· Custom tray is used for pick-up type of impression taking· Uses 1.2 Hex Driver.· Packing contents : Impression Coping + Guide Pin
Height Ø4.0 Ø4.5 Ø5.5 Ø6.5 Guide Pin
09 SSPI 4009N SSPI 4509N SSPI 5509N SSPI 6509N SSG 202113 SSPI 4013N SSPI 4513N SSPI 5513N SSPI 6513N SSG 202617 SSPI 4017N SSPI 4517N SSPI 5517N SSPI 6517N SSG 232919 SSPI 4019N SSPI 4519N SSPI 5519N SSPI 6519N SSG 2329
UFⅡ Implant Product Catalog
28 29
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Solid Abutment
· This is a cemented type abutment which uses dental cement to fix the prosthesis.· Abutment and screw are in one-piece structure.· Taking impression at abutment level.· Considering the esthetics, gingival is colored in gold.· Uses 1.2 Hex / Solid Abutment Driver· Packing contents : Abutment + Protect Cap· Tightening torque : 30 ~ 35Ncm
Length Cuff Ø4.5 Ø5.5 Ø6.5 Ø7.5
4
1 SSSA 45104 SSSA 55104 SSSA 65104 SSSA 751042 SSSA 45204 SSSA 55204 SSSA 65204 SSSA 752043 SSSA 45304 SSSA 55304 SSSA 65304 SSSA 753044 SSSA 45404 SSSA 55404 SSSA 65404 SSSA 754045 SSSA 45504 SSSA 55504 SSSA 65504 SSSA 75504
5.5
1 SSSA 45105 SSSA 55105 SSSA 65105 SSSA 751052 SSSA 45205 SSSA 55205 SSSA 65205 SSSA 752053 SSSA 45305 SSSA 55305 SSSA 65305 SSSA 753054 SSSA 45405 SSSA 55405 SSSA 65405 SSSA 754055 SSSA 45505 SSSA 55505 SSSA 65505 SSSA 75505
7
1 SSSA 45107 SSSA 55107 SSSA 65107 SSSA 751072 SSSA 45207 SSSA 55207 SSSA 65207 SSSA 752073 SSSA 45307 SSSA 55307 SSSA 65307 SSSA 753074 SSSA 45407 SSSA 55407 SSSA 65407 SSSA 754075 SSSA 45507 SSSA 55507 SSSA 65507 SSSA 75507
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Protect Cap
· Used to protect abutment in the patient’s mouth and minimize the discomfort for the patient.· Can be applied to substructure of temporary prosthesis.· Convenient locking mechanism.
Length Ø4.5 Ø5.5 Ø6.5 Ø7.5
4 SSAC 4504 SSAC 5504 SSAC 6504 SSAC 75045.5 SSAC 4505 SSAC 5505 SSAC 6505 SSAC 75057 SSAC 4507 SSAC 5507 SSAC 6507 SSAC 7507
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Impression Cap
· Used to take impression of Solid Abutment.· Different coloring provides easy identification on types of abutment diameter.· Convenient locking mechanism.
Length Ø4.5 Ø5.5 Ø6.5 Ø7.5
4 SSAI 4511 SSAI 5511 SSAI 6511 SSAI 7511Guide Pin ○ White ● Red ● Green ● Blue
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Plastic Coping
· Can be used as prosthesis’ frame work by installing Solid Abutment Analog.· Dierent coloring provides easy identication on types of case.· Packing contents : Plastic Coping
Length Color Ø4.5 Ø5.5 Ø6.5 Ø7.5
10Red SSAP 4510S SSAP 5510S SSAP 6510S SSAP 7510S
White SSAP 4510B SSAP 5510B SSAP 6510B SSAP 7510B
UFⅡ Implant Product Catalog
28 29
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Healing CapLength Ø5.2 Ø7.0
4 HCI 48504 HCI 65704
· To protect Octa Abutment in oral, and minimize the discomfort for patient.· Uses 1.2 Hex Driver· Packing Unit : Healing Cap + Cylinder Screw (STI 2004H)· Tightening torque : 20Ncm
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Gold Cylinder
· After the customization, Dental gold metal will be casted with it to make prosthesis..· Cylinder fusion range : 1400 ~ 1450℃ (Non-precious metal alloy are not allowed for casting)· Uses 1.2 Hex Driver· Packing contents : Gold Cylinder + Cylinder Screw (STI 2004)·Tightening torque : 20Ncm
Length Type Ø5.0 Ø6.2 Ø6.5
4Octa AGI 48504[H] AGI 60004[H] AGI 65704[H]
Non-Octa AGI 48504N[H] AGI 60004N[H] AGI 65704N[H]
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Plastic Cylinder
· After the customization, Dental alloy (Gold, Non-precious metal alloy) will be casted with it to make prosthesis.· Less accuracy on connecting part compared to Gold Cylinder.· Uses 1.2 Hex Driver · Tightening torque: 20Ncm· Packing contents : Plastic Cylinder + Cylinder Screw (STI 2004)
Length Type Ø5.0 Ø6.3 Ø7.0
10Octa API 48514[H] API 60714[H] API 65714[H]
Non-Octa API 48514N[H] API 60714N[H] API 65714N[H]
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Octa Abutment
Cuff Ø4.8 Ø6.0 Ø6.5
1.5 SSOA 4815 SSOA 6015 SSOA 65152.5 SSOA 4825 SSOA 6025 SSOA 65253.5 SSOA 4835 SSOA 6035 SSOA 65354.5 SSOA 4845 SSOA 6045 SSOA 65455.5 SSOA 4855 SSOA 6055 SSOA 6555
· Designed abutment to use prosthesis by turning the internal connection xture into external connection xture type with cylinder.· Used to create screw retained prosthesis on poor path bridge case.· Uses Octa Abutment Driver(HD 3006A / HD 3012A).· Packing contents : Abutment + Holder *Holder installation: Convenient to install in patient’s mouth.· Tightening torque : 30 ~ 35Ncm
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Analog
· Solid Abutment is formed on working model.· Dierent coloring provides easy identication on types of abutment diameter.· Packing Unit : Solid Abutment Analog
Length Ø4.5 Ø5.5 Ø6.5 Ø7.5
4 SSAA 4504 SSAA 5504 SSAA 6504 SSAA 75045.5 SSAA 4505 SSAA 5505 SSAA 6505 SSAA 75057 SSAA 4507 SSAA 5507 SSAA 6507 SSAA 7507
Color - ● Red ● Green ● Blue
UFⅡ Implant Product Catalog
30 31
Temporary Cylinder
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
· Uses 1.2 Hex Driver· Packing contents : Temporary Cylinder + Cylinder Screw (STI 2004)· Tightening torque : 20Ncm
Length Type Ø5.0 Ø6.0
10Octa ITC 48010[H] ITC 60010[H]
Non-Octa ITC 48010N[H] ITC 60010N[H]
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Cemented Cylinder
· Uses 1.2 Hex Driver· Packing contents : Cemented Cylinder + Cylinder Screw (STI 2004H)· Tightening torque : 20Ncm
Lenght Type Ø5.0 Ø5.8 Ø6.4 Ø6.9
8Octa ICC 48508[H] ICC 48588[H]
Non-Octa ICC 48508N[H] ICC 48588N[H]
9Octa ICC 60649[H] ICC 65309[H]
Non-Octa ICC 60649N[H] ICC 65309N[H]
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Pick-up Impression Coping
· Pick-up type impression-taking process using custom tray.· Asymmetry structure to minimize close interruption· Uses 1.2 Hex Driver· Packing contents : Impression Coping + Guide Pin
Lenght Type Ø5.7 Ø6.4 Ø7.0
10Octa IPI 48610 IPI 60710 IPI 65710
Non-Octa IPI 48610N IPI 60710N IPI 65710N
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Abutment Analog
· Provides anchor point for fabricating Octa Abutment conguration.· Packing contents : Octa Abutment Analog
Lenght Ø4.8 Ø6.0 Ø6.5
10RCI 60014
RCI 48014 RCI 65014
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Transfer Impression Coping
· Transfer type impression taking process using ready-made tray· Double sided structure which elevates the quality· Uses 1.2 Hex Driver· Packing contents : Impression Coping + Guide Pin
Lenght Ø5.0 Ø6.1 Ø6.6
10 IOTI 48010 IOTI 60010 IOTI 65010
UFⅡ Implant Product Catalog
30 31
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Dalbo PlusCode DBPM 201
· Double structure with titanium housing and precious metallic insert.· Provides long term usage about 10,000 trials due to its resistance to abrasion.· Minimum abrasion to the Ball Abutment and to the insert.· Simple and convenient retention.· Up to 20° in insertion angle exibility.· Compatible with all DIO Implant System.
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
RetainerCode RT 0502
· Advantageous when occlusal distance is low compare to Ball Cap.· Packing contents : Retainer + O-Ring (2 Piece)
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Ball CapCode BC 5004
· Outstanding consistency and Clip-on· Packing Unit : Ball Cap + O-Ring (Black & Orange)
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
O-RingCode OR 0450 B (Black) / OR 0450 O (Orange)
· Black : Laboratory used for fabrications with high retention.· Orange : For clinical use (Over 6Ncm)· Package Contents : O-Ring (1 Piece)
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Ball Abutment
· Used to create over-denture for edentulous patient.· Used when fixed type Implant prosthesis is difficult due to severe bone or soft tissue loss.· Post part is colored in gold.· Path recovery to the maximum of 20°· Uses Ball Abutment Driver (HD 2406A / HD 2412A)· Packing contents : Abutment + O-Ring (1 Piece) + Holder *Holder installation : Convenient to install in patient’s mouth· Tightening torque : 30 ~ 35Ncm
Lenght Ø3.5
1 SSBA 35102 SSBA 35203 SSBA 35304 SSBA 35405 SSBA 35506 SSBA 3560
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Ball Abutment Analog
· Provides anchor point for ball abutment on working model.· Packing Unit : Analog
Lenght Ø3.5
10 SABA 3510
UFⅡ Implant Product Catalog
32 33
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Stainless Steel HousingCode 041CAN
· The size of the new stainless steel housing has been reduced to provide stability and it is designed to strengthen the coherence with resin.
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
OT Cap(Orange)Code 049PCNDR8
· The OT-Cap is suitable for ball type overdenture material because it is made up of polyamide that has excellent elasticity and abrasion resistance. *Cap replacement is recommended after 12 month of use.Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Insertion Tool For CapsCode 085IAC
· A tool that is used to insert the cap in the stainless housing Possible to use both tip in a normal and micro situation.· Packing Unit : Handle + Tip
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
Remover Tool For CapsCode 091EC
· A tool that is used to remove the cap from the stainless housing Possible to use in both normal and micro situation with one tool.
Single Bridge
D
L
D
D
L
L
D
D
CFixture Level
L
Ø5.0
Ø5.0
Ø4.5
L
D
L
L
2
Ø4.6
4
3
Ø4.2
2.6
D
D
L
D
L
D
L
D
L
D
L
D
L
D
L
D
C
L
L
C
Hex 1.2 D
C
Octa Non-Octa
Octa Non-Octa
L
LocatorLength Ø3.8 / 4.0 / 4.5 / 5.0
0.5 LOC 8656S2 LOC 8657S3 LOC 8658S4 LOC 8659S5 LOC 8660S
MaleRetention 1.5 lbs 3 lbs 5 lbs
Code LOC 8529● Blue
LOC 8527● Pink
LOC 8524○ White
Locator Core Tool
Code LOC 8393
UFⅡ Implant Product Catalog
32 33
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Healing Cap
· Protects the Conical Abutment and promotes patient healing.· Uses 1.2 Hex Driver· Packing Contents: Healing Cap· Tightening Torque : 20Ncm
Length Ø5.0
4.5 HCN 405044.6 -
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Multiunit Screw Driver
Length Ø1.4
25 MSD 1425
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Conical Abutment
· Maintains screw and prosthetic aesthetics.· For fabrication of prosthetic on cylinder after abutment has been placed.· Up to 48° path angle· Uses Ø2.0 Conical Abutment Driver (HD 2012A)· Packing Contents : Abutment· Tightening torque : 30 ~ 35Ncm
Cuff Ø4.8
1 UCA 48012 UCA 48023 UCA 4803
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Multiunit Abutment
· Packing Contents: Abutment + Screw + Holder· Tightening torque : 30 ~ 35Ncm
Cuff20º 30º
Hex Non Hex Hex Non Hex
2.5 UMA 482520H UMA 482520N - -
3 UMA 483020H UMA 483020N UMA 483030H UMA 483030N4 UMA 484020H UMA 484020N UMA 484030H UMA 484030N5 UMA 485020H UMA 485020N UMA 485030H UMA 485030N
Screw MAS 2006S
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Pick-up Impression Coping
· Create final impression of Conical Abutment on Impression Coping.· For use with pick-up type custom trays.· Packing Contents : Impression Coping + Guide Pin
Cuff30º
Hex Non Hex
2.5 IPN 40508 IPN 40508N
UFⅡ Implant Product Catalog
34 35
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Gold Cylinder
· Cylinder Melting Point: 1400 ~ 1500℃ (Depending on casting machine).· Uses 1.2 Hex Driver· Packing Contents : Gold Cylinder + Cylinder Screw· Tightening Torque : 20Ncm
LengthØ5.0
Hex Non Hex Screw
12 AGN 40504 AGN 40504N SHN 1403
Plastic Cylinder
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
· Cast in premium gold alloy after customization.· Less precise than the gold cylinder.· Uses 1.2 Hex Driver· Packing Contents : Plastic Cylinder + Cylinder Screw· Tightening Torque : 20Ncm
LengthØ5.0
Hex Non Hex Screw
13 APN 40514S APN 40514SN SHN 1403
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Temporary Cylinder
· For fabricating temporary prosthetics on top of Conical Abutments.· Simple customization· Minimizes restriction· Uses 1.2 Hex Driver· Packing Contents : Temporary Cylinder + Cylinder Screw· Tightening Torque : 20Ncm
LengthØ5.4
Hex Non Hex Screw
11 TCN 40511 TCN 40511N SHN 1403
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Cylinder Screw
Length M1.4
3.0 SSN 1403
· Provides anchor point for Conical Abutment.· Packing Contents : Analog
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Abutment Analog
Length Ø4.8
12 RCN 40412
c
Angle
Cuff
Hex Non-Hex
*Multiunit Abutment Holder : MAH 1425
LD
D
D
L
Hex
D
Non-Hex
Hex Non-Hex
Hex Non-Hex
Hex Non-Hex
0.5 Slot
D
L
L
D
L
D
D
L
Transfer Impression Coping
Code ICC 4805 / ICCS 1407
DSU
2708
M
DSU
27xx
M
Ø2.0
Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth GaugeOrder Code : DPG 2050
Torque Wrench
*Bottom Case
Order Code : DTW 0060
Starter DrillOrder Code : SD 1530M
Initial DrillOrder Code : DHF 2015SM
Tap DrillOrder Code : UNTD 3015 · UNTD 3315
1.2 Hex Screw DriverOrder Code : MD 1230 · HD 1220A
Fixture DriverOrder Code : UNFDC 3006* · UNFDW 3006* UNFDC 3012 · UNFDW 3012 UNFDC 3018 · UNFDW 3018
Parallel PinOrder Code : PP 2022 · PP 2023
DrillOrder Code : DSU 2708M · DSU 2710M DSU 2711M · DSU 2713M
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DSU 2008M DSU 2010M DSU 2011M DSU 2013M
Initial Drill
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : MHDC 2520 MHDR 2513A
Mount Driver
Order Code : UNTD 3015 UNTD 3315
Tap Drill
Order Code : FDC 3506 · FDW 3512A FDC 3512 · FDW 3518A
Fixture Driver
Order Code : DE 3507MDrill Extension
Order Code : HDS 4506A · HDS 5506A · HDS 6506A HDS 4512A · HDS 5512A · HDS 6512A
Solid Abutment Driver
Order Code : UNFDC 3012 UNFDC 3018
for UF(II) Narrow
for UF(II) Regular/Wide
Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : MD 1230 HD 1215A
Screw Driver
Order Code : HD 2412ABall Abutment Driver
Order Code : HARD 20315AAbutment Removing Driver
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : DSU 5007 · DSU 5507 · DSU 6007 DSU 5008 · DSU 5508 · DSU 6008 DSU 5010 · DSU 5510 · DSU 6010 DSU 5011 · DSU 5511 · DSU 6011
Final DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DHF 2015SMST 2008F · ST 2010FST 2011F · ST 2013F
Initial Drill
Ø2.0
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DE 3507MDrill Extension
Order Code : FDC 3506 · FDC 3512 FDW 3512A · FDW 3518A
Fixture DriverOrder Code : MD 1230 · HD 1215AScrew Driver
Order Code : UT(II) 6006 · UT(II) 6506 · UT(II) 7006Tap Drill
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050 Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050
Order Code : TRD 4739 TRD 5244 TRD 5749
Trephine DrillOrder Code : FDC 3506 · FDW 3506A FDC 3512 · FDW 3512A
Fixture Driver
Order Code : UPD 6010 · UPD 6510 · UPD 7010Profile Drill
Order Code : UNFDC 3012 UNFDC 3018Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : UNTD 3015 · UNTD 3315Tap Drill
for UF(II) Narrow for UF(II) Regular/Wide
UFⅡ Implant Product Catalog
34 35
UF Master Kit
· UF(II) Regular is available (optional)
DSU
2708
M
DSU
27xx
M
Ø2.0
Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth GaugeOrder Code : DPG 2050
Torque Wrench
*Bottom Case
Order Code : DTW 0060
Starter DrillOrder Code : SD 1530M
Initial DrillOrder Code : DHF 2015SM
Tap DrillOrder Code : UNTD 3015 · UNTD 3315
1.2 Hex Screw DriverOrder Code : MD 1230 · HD 1220A
Fixture DriverOrder Code : UNFDC 3006* · UNFDW 3006* UNFDC 3012 · UNFDW 3012 UNFDC 3018 · UNFDW 3018
Parallel PinOrder Code : PP 2022 · PP 2023
DrillOrder Code : DSU 2708M · DSU 2710M DSU 2711M · DSU 2713M
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DSU 2008M DSU 2010M DSU 2011M DSU 2013M
Initial Drill
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : MHDC 2520 MHDR 2513A
Mount Driver
Order Code : UNTD 3015 UNTD 3315
Tap Drill
Order Code : FDC 3506 · FDW 3512A FDC 3512 · FDW 3518A
Fixture Driver
Order Code : DE 3507MDrill Extension
Order Code : HDS 4506A · HDS 5506A · HDS 6506A HDS 4512A · HDS 5512A · HDS 6512A
Solid Abutment Driver
Order Code : UNFDC 3012 UNFDC 3018
for UF(II) Narrow
for UF(II) Regular/Wide
Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : MD 1230 HD 1215A
Screw Driver
Order Code : HD 2412ABall Abutment Driver
Order Code : HARD 20315AAbutment Removing Driver
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : DSU 5007 · DSU 5507 · DSU 6007 DSU 5008 · DSU 5508 · DSU 6008 DSU 5010 · DSU 5510 · DSU 6010 DSU 5011 · DSU 5511 · DSU 6011
Final DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DHF 2015SMST 2008F · ST 2010FST 2011F · ST 2013F
Initial Drill
Ø2.0
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DE 3507MDrill Extension
Order Code : FDC 3506 · FDC 3512 FDW 3512A · FDW 3518A
Fixture DriverOrder Code : MD 1230 · HD 1215AScrew Driver
Order Code : UT(II) 6006 · UT(II) 6506 · UT(II) 7006Tap Drill
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050 Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050
Order Code : TRD 4739 TRD 5244 TRD 5749
Trephine DrillOrder Code : FDC 3506 · FDW 3506A FDC 3512 · FDW 3512A
Fixture Driver
Order Code : UPD 6010 · UPD 6510 · UPD 7010Profile Drill
Order Code : UNFDC 3012 UNFDC 3018Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : UNTD 3015 · UNTD 3315Tap Drill
for UF(II) Narrow for UF(II) Regular/Wide
Order Code : UF(M) 06
UFⅡ Implant Product Catalog
36 37
UF Surgical Kit
DSU
2708
M
DSU
27xx
M
Ø2.0
Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth GaugeOrder Code : DPG 2050
Torque Wrench
*Bottom Case
Order Code : DTW 0060
Starter DrillOrder Code : SD 1530M
Initial DrillOrder Code : DHF 2015SM
Tap DrillOrder Code : UNTD 3015 · UNTD 3315
1.2 Hex Screw DriverOrder Code : MD 1230 · HD 1220A
Fixture DriverOrder Code : UNFDC 3006* · UNFDW 3006* UNFDC 3012 · UNFDW 3012 UNFDC 3018 · UNFDW 3018
Parallel PinOrder Code : PP 2022 · PP 2023
DrillOrder Code : DSU 2708M · DSU 2710M DSU 2711M · DSU 2713M
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DSU 2008M DSU 2010M DSU 2011M DSU 2013M
Initial Drill
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : MHDC 2520 MHDR 2513A
Mount Driver
Order Code : UNTD 3015 UNTD 3315
Tap Drill
Order Code : FDC 3506 · FDW 3512A FDC 3512 · FDW 3518A
Fixture Driver
Order Code : DE 3507MDrill Extension
Order Code : HDS 4506A · HDS 5506A · HDS 6506A HDS 4512A · HDS 5512A · HDS 6512A
Solid Abutment Driver
Order Code : UNFDC 3012 UNFDC 3018
for UF(II) Narrow
for UF(II) Regular/Wide
Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : MD 1230 HD 1215A
Screw Driver
Order Code : HD 2412ABall Abutment Driver
Order Code : HARD 20315AAbutment Removing Driver
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : DSU 5007 · DSU 5507 · DSU 6007 DSU 5008 · DSU 5508 · DSU 6008 DSU 5010 · DSU 5510 · DSU 6010 DSU 5011 · DSU 5511 · DSU 6011
Final DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DHF 2015SMST 2008F · ST 2010FST 2011F · ST 2013F
Initial Drill
Ø2.0
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DE 3507MDrill Extension
Order Code : FDC 3506 · FDC 3512 FDW 3512A · FDW 3518A
Fixture DriverOrder Code : MD 1230 · HD 1215AScrew Driver
Order Code : UT(II) 6006 · UT(II) 6506 · UT(II) 7006Tap Drill
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050 Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050
Order Code : TRD 4739 TRD 5244 TRD 5749
Trephine DrillOrder Code : FDC 3506 · FDW 3506A FDC 3512 · FDW 3512A
Fixture Driver
Order Code : UPD 6010 · UPD 6510 · UPD 7010Profile Drill
Order Code : UNFDC 3012 UNFDC 3018Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : UNTD 3015 · UNTD 3315Tap Drill
for UF(II) Narrow for UF(II) Regular/Wide
Order Code : UF(M) 07
· UF(II) Regular is available(optional)
UFⅡ Implant Product Catalog
36 37
UF(II) Wide Surgical Kit
DSU
2708
M
DSU
27xx
M
Ø2.0
Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
Depth GaugeOrder Code : DPG 2050
Torque Wrench
*Bottom Case
Order Code : DTW 0060
Starter DrillOrder Code : SD 1530M
Initial DrillOrder Code : DHF 2015SM
Tap DrillOrder Code : UNTD 3015 · UNTD 3315
1.2 Hex Screw DriverOrder Code : MD 1230 · HD 1220A
Fixture DriverOrder Code : UNFDC 3006* · UNFDW 3006* UNFDC 3012 · UNFDW 3012 UNFDC 3018 · UNFDW 3018
Parallel PinOrder Code : PP 2022 · PP 2023
DrillOrder Code : DSU 2708M · DSU 2710M DSU 2711M · DSU 2713M
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DSU 2008M DSU 2010M DSU 2011M DSU 2013M
Initial Drill
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : MHDC 2520 MHDR 2513A
Mount Driver
Order Code : UNTD 3015 UNTD 3315
Tap Drill
Order Code : FDC 3506 · FDW 3512A FDC 3512 · FDW 3518A
Fixture Driver
Order Code : DE 3507MDrill Extension
Order Code : HDS 4506A · HDS 5506A · HDS 6506A HDS 4512A · HDS 5512A · HDS 6512A
Solid Abutment Driver
Order Code : UNFDC 3012 UNFDC 3018
for UF(II) Narrow
for UF(II) Regular/Wide
Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : MD 1230 HD 1215A
Screw Driver
Order Code : HD 2412ABall Abutment Driver
Order Code : HARD 20315AAbutment Removing Driver
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Order Code : DSU 2708M · DSU 3008M · DSU 3208M · DSU 3808M · DSU 4308M DSU 2710M · DSU 3010M · DSU 3210M · DSU 3810M · DSU 4310M DSU 2711M · DSU 3011M · DSU 3211M · DSU 3811M · DSU 4311M DSU 2713M · DSU 3013M · DSU 3213M · DSU 3813M · DSU 4313M
DrillOrder Code : DSU 5007 · DSU 5507 · DSU 6007 DSU 5008 · DSU 5508 · DSU 6008 DSU 5010 · DSU 5510 · DSU 6010 DSU 5011 · DSU 5511 · DSU 6011
Final DrillOrder Code : UPD 3805M UPD 4005M UPD 4505M UPD 5005M
Profile Drill
Order Code : RMH 2014SLindemann Drill
Order Code : SD 1530MStarter Drill
Order Code : DHF 2015SMST 2008F · ST 2010FST 2011F · ST 2013F
Initial Drill
Ø2.0
Order Code : PP 2022 PP 2023
Parallel Pin
Order Code : DE 3507MDrill Extension
Order Code : FDC 3506 · FDC 3512 FDW 3512A · FDW 3518A
Fixture DriverOrder Code : MD 1230 · HD 1215AScrew Driver
Order Code : UT(II) 6006 · UT(II) 6506 · UT(II) 7006Tap Drill
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050 Torque Wrench
*Bottom Case
Order Code : DTW 0060
8.5 / 10 / 11.5 / 13 / 15 / 18
8.51011.5
1315
18
Open WrenchOrder Code : OW 004
Depth Gauge Order Code : DPG 2050
Order Code : TRD 4739 TRD 5244 TRD 5749
Trephine DrillOrder Code : FDC 3506 · FDW 3506A FDC 3512 · FDW 3512A
Fixture Driver
Order Code : UPD 6010 · UPD 6510 · UPD 7010Profile Drill
Order Code : UNFDC 3012 UNFDC 3018Order Code : UNFDW 3012 UNFDW 3018
Fixture Driver
Order Code : UNTD 3015 · UNTD 3315Tap Drill
for UF(II) Narrow for UF(II) Regular/Wide
Order Code : UF 09
UFⅡ Implant Product Catalog
38 39
Regular / Wide
Starter DrillL1 / L2 Ø1.5
30 / 15 SD 1530M
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Pilot DrillL1 / L2 Ø2.0 / Ø2.7
31 / 17 PS 3512
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Straight DrillL1 / L2 Ø2.7
33 / 15.63 SDS 2715BM
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
L1 / L2 Ø0.6 / Ø2.0 Ø0.75 / Ø2.0
23 / 15 PP 1223 PP 1523
Parallel PinL1 / L2 Ø2.0 / Ø2.7
15 / 8 PP 201522 / 10 PP 202223 / 16 PP 2023
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
L1 / L2 Ø3.8 Ø4.0 Ø4.5 Ø5.0
30 / 16 UPD 3805M UPD 4005M UPD 4505M UPD 5005MColor ● Blue ● Red ● Gray ● Green
Profile Drill
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
L1 / L2 Ø2.6 Ø2.9 Ø3.1 Ø3.7 Ø4.2 Ø4.8
33 / 9 DSU 2708M DSU 3008M DSU 3208M DSU 3808M DSU 4308M DSU 4808M33 / 10 DSU 2710M DSU 3010M DSU 3210M DSU 3810M DSU 4310M DSU 4810M33 / 12 DSU 2711M DSU 3011M DSU 3211M DSU 3811M DSU 4311M DSU 4811M33 / 13 DSU 2713M DSU 3013M DSU 3213M DSU 3813M DSU 4313M DSU 4813M
Color● Purple● Yellow
● Blue ● Red ● Gray ● Green ○ White
Drill
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Initial DrillL1 / L2 Ø2.0
34.5 / 17.5 DHF 2015SM
Length Ø2.0
8.5 DSU 2008M10 DSU 2010M
11.5 DSU 2011M13 DSU 2013M
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
78.5
UFⅡ Implant Product Catalog
38 39
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Fixture DriverLength Machine Ratchet
6 FDC 3506 FDW 3506A12 FDC 3512 FDW 3512A18 FDC 3518 FDW 3518A
Mount Driver
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Length2.5 Hex
Machine Ratchet
6 MHDC 2520 MHDR 2513A11 MHDC 2525 MHDR 2518A
Screw Driver
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
L1 / L21.2 Hex
L1 / L21.2 Hex
Machine Ratchet
19 / 5 MD 1219 5 HD 1205A22 / 8 MD 1222 10 HD 1210A30 / 16 MD 1230 15 HD 1215A
20 HD 1220A
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Length Ø4.5 Ø5.5 Ø6.5
6 HDS 4506A HDS 5506A HDS 6506A12 HDS 4512A HDS 5512A HDS 6512A
Solid Abutment Driver
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Ball Abutment DriverLength 2.4 Hex
6 HD 2406A12 HD 2412A
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Removing DriverLength M 2.0
6 HARD 20315A12 HARD 20320A
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Octa Abutment DriverLength 3.0 Octa
6 HD 3006A12 HD 3012A
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Conical Abutment DriverLength 2.0 Int. Hex 2.7 Int. Hex
12 HD 2012A HD 2712A
Fixture / Drill Ø3.0 Ø3.3 Ø3.8 Ø4.0 Ø4.5 Ø5.0
Code UNTD 3015 UNTD 3315 UT(ll) 3815 UT(ll) 4015 UT(ll) 4515 UT(ll) 5015Color ●Purple ●Yellow ●Blue ●Red ●Gray ●Green
Tap Drill
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
· Option) Ø3.8/4.0/4.5/5.0 Availble
UFⅡ Implant Product Catalog
40 41
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Lindemann DrillL1 / L2 Ø1.4 / Ø2.0
30 / 14 RMH 2014S
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Path PinLength Ø3.5
12 DPP 3512
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Angled Path Pin
AngledØ4.5
Hex A Hex B
15˚ MHDC 2520 MHDR 2513AColor ● Blue ● Green
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Drill ExtensionL1 / L2 Code
26 / 12 DE 3507M
Only for UF(II) Wide
Tap DrillDiameter Ø5.4 Ø5.9 Ø6.4
Code UT(II) 6006 UT(II) 6506 UT(II) 7006
Profile DrillDiameter Ø5.4 Ø5.9 Ø6.4
Code UPD 6010 UPD 6510 UPD 7010
Final DrillL Ø4.9 Ø5.4 Ø5.9
7 DSU 5007 DSU 5507 DSU 60078.5 DSU 5008 DSU 5508 DSU 600810 DSU 5010 DSU 5510 DSU 6010
11.5 DSU 5011 DSU 5511 DSU 6011
Trephine DrillDiameter Ø4.7 Ø5.2 Ø5.7
Code TRD 4739 TRD 5244 TRD 5749
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Positioning GuideLength Ø2.0
7 PG 0060
UFⅡ Implant Product Catalog
40 41
Regular Fixture Surgical Protocol
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Starter Drill1,200rpm
Drill800rpm
Profile Drill300rpm
Initial Drill1,000rpm
Tap Drill50rpm
UF(ll) Fixture20rpm
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Tap Drill
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
DrillUsing 8.5mm Drill with laser marking to place
7mm implant.
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Profile Drill
LowerUsed to reduce applicable
torque on D2, D3 Bone.
UpperUsed to reduce applicable
torque on D1, D2 Bone.
Drilling depth can be effect initial stability.
L1
L2
L L
L
L
D
L2
L1D1
D2
L
DD
Hex BHex A
15
L
Machine Ratchet
Machine Ratchet
L
LL
Machine RatchetL2
L1
L0.5mm
0.5mm
1mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
7.5mm
1mm
L1
L2
D
L1
L2
D1
D2
D1 D2
L1
L2
D1 D2
L1
L2
D
L1
L2
D Ø2.0
L1
L2
D
L1L20.5
7
8.5
D
L1
L2
D
0.5 8.5 11.5 15
107 13
7 8.5
0.5
Lower
Upper
Starter Drill1,200rpm
Drill800rpm
Profile Drill300rpm
Initial Drill1,000rpm
Tap Drill50rpm
UF(ll) Fixture20rpm
I Bone Level Application
I Bone Level 1mm Sub Application
UFⅡ Implant Product Catalog
42 43
Wide Fixture Surgical Protocol
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
1mm
Straight Drill800rpm
Tap Drill50rpm
UF(ll) Wide Fixture20rpm
Drill300rpm
Fixture Length 6.5mm
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
1mm
Fixture Length 6.5mm
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
1mm
Fixture Length 7mm
UFⅡ Implant Product Catalog
42 43
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
1mm
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
0.5mm
Soft Bone
Medium Bone (D2, D3)
Hard Bone (D1, D2)
1mm
Fixture Length over 11.5mm
Fixture Length over 11.5mm
Straight Drill800rpm
Straight Drill800rpm
Tap Drill50rpm
Tap Drill50rpm
UF(ll) Wide Fixture20rpm
UF(ll) Wide Fixture20rpm
Drill300rpm
Drill300rpm
I Bone Level Application
I Bone Level 1mm Sub Application
· Use Straight Drill without stopper
UFⅡ Implant Product Catalog
44 45
Sterilization
Cleanse / Dry
1 / Because all surgical tools are provided in a non-sterile condition, they must be cleansed and sterilized before use.
Caution
Wrong cleansing and sterilizing process causes corrosion and damage to the tools and if used directly, it may be the cause of 2nd infection.
2/ The recommended number of use of a drill is 20~30 times based on the bone status, and it must be replaced if the blade has been damaged or transformed.
Caution
If damaged drill is used, Heat Necrosis may occur
3/ When managing the surgical tool, one must wear a mask and a glove to prevent infection.
1/ Must only use antiseptic solution that is FDA and CE approved, and you must follow the manufacturer’s directions
2/ When cleansing metal instruments, corrosion free antiseptic solution and cleansing product use is recommended.
3 / For safety, one must always wear personal protection gear such as gloves, glasses, and masks.
4 / The user has an obligation to be responsible for the sterilization and management of the instrument.
5 / Restriction and limitation of the instrument reuse:· With repetition of cleansing, the life expectancy of all instruments
will decrease. If the instruments show corrosion, transformation or discoloring of the marking area, it means that they have exceeded the safety criteria that is required for use.
·Product with a disposable mark cannot be reused. ·Tungsten carbide burs, plastic composition and NiTi instruments can be damaged with hydrogen peroxide, and aluminum material instruments can be damaged by caustic soda solution.
·Acid solution (pH < 6) and alkaline solution (pH > 8) must not be used.
1 / Contaminants must be completely removed using a soft brush. Do not use a wire brush or stainless material brush, and do not put too much pressure.
2 / Immerse the products in the antiseptic solution of their characteristics and clean with an ultrasonic cleaner. However, do not cleanse the different materials together. Also, when immersing the instruments in the ultrasonic cleaner, make sure that the instruments do not touch each other.
3 / Make sure that debris is not seen with the naked eye. · Products that are fractured or transformed must be discarded. · One should follow the recommendations for the level of concentration or the length of time provided by the manufacturer. · The antiseptic solution must not include aldehyde, di- or tri-ethanolamines component to control the corrosion.
Caution
After use, if the contaminants such as residual bone or blood stain are not completely removed, it may lead to corrosion; therefore all separable instruments must all be disassembled before the cleansing process.
Surgery
Cleanse
Dry
Pack
Storage
Pasteurization
Surgical ToolMainteance
Process
Sterilization
1
2
Before sterilization1/ To prevent contaminants such as blood, tissue cell or bone residue
from attaching to the surface of the instruments, the instruments must be immersed in an antiseptic solution right after use.
2/ When using antiseptic solution, to prevent corrosion or bronzing, one must follow directions given by the manufacturer of the concentration of the antiseptic and the duration of the instrument immersion in the antiseptic.
Check
Concentration : completely liquefy the concentrate before placing the instruments in the antiseptic solution. Immersion Duration : The instruments must not be immersed more than a day
3/ The instruments must be fully immersed in the antiseptic solution.
4/ For a decrease in sterilizing power and to prevent corrosion, the antiseptic solution must be replaced every day.
Before rinse To prevent protein from clotting in 45 degrees temperature Celsius,
the instruments must be rinsed in running cold water.
Cleanse the instruments right after preliminary rinse
Caution
General principles of surgical tool management
UFⅡ Implant Product Catalog
44 45
4 / After cleaning, the products must be rinsed with distilled water or deionized water for at least a minute.
If the antiseptic solution contains corrosion inhibitor, rinsing before placing in the sterilizer is recommended.
5 / To prevent corrosion or water stain on the instruments, completely dry with a dryer or filtered compressed air
6 / To prevent corrosion, decrease in sterilizing power, and contamination, antiseptic must be supplemented every day.
Caution
If the instruments are not properly rinsed, residue is left behind, or is not properly dried, the sterilization process might discolor or corrode the instruments, and therefore the whole process must be gone through again.
Caution
Corrosion may start if debris such as blood stain or bone residue is not completely removed. They must be cleansed right after use and the debris must be completely removed when cleaning.
Caution
· The products must not touch the inner part of the sterilization equipment, and the sterilization degree must be lower than 150℃· The products that were not properly cleansed or dried may generate corrosion. If they were not cleansed, not properly dried or corroded, separate them from the rest or remove the faults. (Do not sterilize the corroded instruments with the noncorroded products together)
· For sterilization, use only salt-free water or distilled water for the solution. (Do not use tap water)
· Check if the instruments are fully dried, and do not leave them in a place with high moisture.
Check
Check on the instruments for faults (fracture, transformation, or corrosion). If necessary, assemble the instruments. Contaminated instruments must be cleansed or disinfected. Transformations that may affect the safety, performance or tolerance of the instruments; in other words; bent, damaged (fractured, corroded), or faulty products (discoloration of marking area, Loss) must be destroyed.
Packaging1 / Check on the dry status of the instruments and pack in the
sterilized wrapping paper.
2 / On the sterilized wrapping paper, attach a direction tape to check the date of sterilization. Check on the expiration date on the sterilized wrapping paper. Wrapping paper must be able to withstand up to 141 degrees that coincides with the EN ISO 11607.
3
StorageInstruments must be stored in a sterilized container in a dry and clean environment. If the packaging is opened or damaged, we cannot guarantee the instruments’ sterilization status.
5
Pasteurization1 / Pasteurization process must follow the sterilizer equipment
manufacturer. ※ 4~ 18 minutes in 134’C for autoclave sterilization.2/ Instruments and plastic components must be sterilized based on
their packaging label.·Sterilizer must coincide with the requirements of EN 13060 and EN285.·Sterilization process must regard the ISO 11607.·One must follow the sterilization process and maintenance process of the sterilizer provided by the manufacturer.·Efficiency management (Proper packaging, no humidity, change in color of the sterilization dashboard)
4
Date of publication I April 2015
Editing I DIO Implant Marketing team
Publisher I DIO Implant Headquarters
Digital Implant No.1
DIO Implant 66, Centum seo-ro, Haeundae-gu, Busan 612-020, Korea Tel +82 51 745 7777 Fax +82 51 745 7778 www.dioimplant.com
UFS01E Ver.01_201504