TX6000 Headroom Performance Platform
2
TX6000 ™ Headroom Performance Platform The TX6000 ™ solution is a fully integrated system designed for optimum network performance and reliability. The solution provides end-users with assurance that the TX6000 ™ system will exceed the ANSI/TIA-568-C.2 Category 6 standard relative to the following key electrical parameters: Insertion Loss, Near-End Crosstalk (NEXT) Power Sum NEXT, ACR, Power Sum ACR, and Return Loss. To determine the guaranteed headroom performance shown below, over 100 channels were constructed, tested, and analyzed. ■ These channels consisted of three and four connector topologies – in both short and long cabling runs – to ensure true worst-case conditions ■ Testing was conducted at swept frequencies from 1 MHz to 250 MHz per industry standards ■ The testing represents “real world” conditions through the use of an industry recognized hand-held tester, not test analyzers or computer models Horizontal Cable System Components TX6000 ™ U/UTP Cable Work Area Mini-Com ® TX6 ™ PLUS Jack Module Telecommunications Room DP6 ™ PLUS Patch Panel Mini-Com ® TX6 ™ PLUS Jack Module Consolidation Point GP6 ™ PLUS Punchdown System Patch Cords TX6 ™ PLUS Patch Cords Electrical Value Guaranteed Channel Headroom Over Standard (dB*) 1000BASE-T Applications 1.2 Gb/s ATM, 622 Mb/s ATM, 155 Mb/s ATM Token Ring 4/16 TP-PMD 1000BASE-TX 100BASE-TX Future applications intended for Category 6 cabling 10BASE-TX ISO 11801 Standard Compliance ANSI/TIA-568-C.2 TIA-569-B ANSI/TIA-606-A Insertion Loss 5.0% NEXT 6.0dB PSNEXT 7.5dB ACR-N 7.0dB PSACR-N 9.0dB ACR-F 7.0dB PSACR-F 9.0dB Return Loss 2.0dB Panduit is a Solutions Enabler Partner for IP Communications within the Cisco Technology Developer Program. In order to ensure headroom performance, all systems must be installed per applicable standards by a Panduit Certified Installer. Workstation Consolidation Point Workstation Outlet Jumper or Modular Cord Switch Equipment Cord Work Area Cord Horizontal Cable Telecommunications Room Cross-Connect/Interconnect Channel
Transcript of TX6000 Headroom Performance Platform
TX6000™ Headroom Performance PlatformThe TX6000™ solution is a fully integrated system designed foroptimum network performance and reliability. The solution providesend-users with assurance that the TX6000™ system will exceed the ANSI/TIA-568-C.2 Category 6 standard relative to the following key electrical parameters: Insertion Loss, Near-End Crosstalk (NEXT)Power Sum NEXT, ACR, Power Sum ACR, and Return Loss.
To determine the guaranteed headroom performance shown below, over 100 channels were constructed, tested, and analyzed.
■ These channels consisted of three and four connectortopologies – in both short and long cabling runs – to ensure true worst-case conditions
■ Testing was conducted at swept frequencies from 1 MHzto 250 MHz per industry standards
■ The testing represents “real world” conditions throughthe use of an industry recognized hand-held tester, not testanalyzers or computer models
Horizontal Cable
System Components
TX6000™ U/UTP Cable
Work Area Mini-Com® TX6™ PLUS Jack Module
TelecommunicationsRoom
DP6 ™ PLUS Patch PanelMini-Com® TX6™ PLUS Jack Module
Consolidation Point GP6™ PLUS Punchdown System
Patch Cords TX6™ PLUS Patch Cords
Electrical Value
Guaranteed Channel HeadroomOver Standard (dB*)
1000BASE-T
Applications
1.2 Gb/s ATM, 622 Mb/s ATM, 155 Mb/s ATM
Token Ring 4/16
TP-PMD
1000BASE-TX
100BASE-TX
Future applications intended forCategory 6 cabling
10BASE-TX
ISO 11801
Standard Compliance
ANSI/TIA-568-C.2
TIA-569-B
ANSI/TIA-606-A
Insertion Loss 5.0%
NEXT 6.0dB
PSNEXT 7.5dB
ACR-N 7.0dB
PSACR-N 9.0dB
ACR-F 7.0dB
PSACR-F 9.0dB
Return Loss 2.0dB
Panduit is a Solutions Enabler Partner for IP Communications within the Cisco Technology Developer Program.
In order to ensure headroom performance, all systems must be installed per applicable standards by a Panduit Certified Installer.
Workstation
Consolidation Point
WorkstationOutlet
Jumper orModular Cord
SwitchEquipment
CordWork AreaCord
HorizontalCable Telecommunications Room
Cross-Connect/Interconnect
Channel
**See catalog for available colors.***For lengths 3' to 20' (increments of 1') 25', 30', 35' and 40' change the length in the part number to the desired length.
TX6000 ™ Headroom Performance Platform
T X 6 0 0 0™ S o l u t i o n Pa r t N u m b e r s
Category 6 U/UTP Riser
Cable Type Part Number Description
Category 6 U/UTP Plenum
*Available in Black (BL), Blue (BU), Green (GR), International Gray (IG), Orange (OR), Red (RD), Violet (VL), White (WH) and Yellow (YL).
PUR6004*-UY
PUP6004*-UY
High-performance Category 6 riser (CMR cable with separator). Conductors are23 AWG construction. ETL tested and verified for Category 6 performance.
High-performance Category 6 plenum (CMP cable with separator). Conductorsare 23 AWG construction. ETL tested and verified for Category 6 performance.
Mini-Com® TX6™ PLUS Jack Module
Work Area Part Number Description
TX6™ PLUS Patch Cord
CJ688TGIW**
UTPSP***Y
Category 6, RJ45, 8-position, 8-wire universal module.
Category 6 patch cord with TX6™ PLUS Modular Plug on both ends.
GP6 ™ PLUS Punchdown System
Consolidation Point Part Number Description
GPKBW24Y Category 6, punchdown termination kit.
DP6™ PLUS Flat Patch Panel
Telecommunications Room Part Number Description
DP6™ PLUS Flat Patch Panel
DP24688TGY
DP48688TGY
Category 6, 24-port, flat punchdown patch panel.
Category 6, 48-port, flat punchdown patch panel.
DP6™ PLUS Angled Patch Panel DPA24688TGY Category 6, 24-port, angled punchdown patch panel.
DP6™ PLUS Angled Patch Panel DPA48688TGY Category 6, 48-port, angled punchdown patch panel.
©2011 Panduit Corp.ALL RIGHTS RESERVED.
WW-COFL05Replaces SA-COFL01
11/2011
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADAMarkham, [email protected]: 800.777.3300
PANDUIT EUROPE LTD.London, [email protected]: 44.20.8601.7200
PANDUIT JAPANTokyo, [email protected]: 81.3.6863.6000
PANDUIT SINGAPORE PTE. LTD.Republic of [email protected]: 65.6305.7575
PANDUIT AUSTRALIA PTY. LTD.Victoria, [email protected]: 61.3.9794.9020
PANDUIT LATIN AMERICAGuadalajara, [email protected]: 52.33.3777.6000
Contact Customer Service by email: [email protected] by phone: 800-777-3300 and reference COFL05
Visit us at www.panduit.comFor more information
50
60
70Power Sum ACR-N
10
20
30
40
50
60
70
PS A
CR
-F (d
B)
Power Sum ACR-F
0 #REF!
0 0
0 0
Panduit report and all calculations and graphs were done by Panduit from data supplied by Intertek ETL SEMKO on 3 tests performed on the specific channel specified in report # & 'Cover Page'!J10
0
10
20
30
40
0 50 100 150 200 250 300 350 400 450 500 550
PS A
CR
(dB
)
Frequency (MHz)
PS NEXT Pair 1 PS NEXT Pair 2 PS NEXT Pair 3 PS NEXT Pair 4Cat6 TIA Channel PSNEXT Insertion Loss Pair 1 Insertion Loss Pair 2 Insertion Loss Pair 3Insertion Loss Pair 4 Cat6 TIA Channel IL
0
10
20
30
40
50
60
0 50 100 150 200 250 300 350 400 450 500 550
Ret
urn
Loss
(dB
)
Frequency (MHz)
Return Loss
Pair 1 Pair 2 Pair 3 Pair 4 Cat6 TIA Channel Return Loss
00 50 100 150 200 250 300 350 400 450 500 550
Frequency (MHz)
Pair 1 Pair 2 Pair 3 Pair 4 Cat6 TIA Channel PSACR-F
