TUBING - Norgren Pneumatics. Motion Control Equipment, Fluid

6-01

T U B I N G

PA2Nylon tube

Ø 3 ... 16 mm

Page 6-02

PANylon tubeØ 1/8” ... 3/4”

Page 6-04

LPA2, LPA3Rail vehicle approved fire and smoke resistant nylon tube

Ø 6 ... 12 mm

Page 6-06

Register_6.indd 1 17.08.2010 15:47:13 Uhr

6-02 For further information www.norgren.com/rail

Nylon tube PA2

Ø 3 ... 16 mm

Available in a range of colours for ease of identification

In addition to general industrial applications Nylon is suitable for use on air braking systems of commercial vehicles and conforms to DIN 74324 (applicable sizes: 6, 8, 10, 12, 16mm O/D)

25 metre lengths supplied in cartons providing good protection and easy storage

Medium: Compressed air. Consult our Technical Service for use with other fluids

Operating pressure: Refer to specific tubing type on the following pages

Ambient temperature: Refer to specific tubing type on the following pages

Technical featuresMaterials Nylon (polyamide) type 12, fully plasticised and light stabilised. Metric tube meets the require-ments of DIN 74324

+20°C (+68°F)

-40°C (-40°F)

Colour Length (m)

O/D I/D tube4/2,5 5/3* 6/4 8/6 10/7,5 12/9 14/11* 16/12

Natural 25 PA2-0004025C PA2-0005025C PA2-0006025C PA2-0008025C PA2-0010025C PA2-0012025C PA2-0014025C PA2-0016025C

Natural 100 PA2-0004100 - PA2-0006100 PA2-0008100 PA2-0010100 PA2-0012100 - -

Red 25 PA2-0104025C PA2-0105025C PA2-0106025C PA2-0108025C PA2-0110025C PA2-0112025C PA2-0114025C PA2-0116025C

Red 100 PA2-0104100 - PA2-0106100 PA2-0108100 PA2-0110100 PA2-0112100 - -

Green 25 PA2-0204025C PA2-0205025C PA2-0206025C PA2-0208025C PA2-0210025C PA2-0212025C PA2-0214025C PA2-0216025C

Green 100 PA2-0204100 - PA2-0206100 PA2-0208100 PA2-0210100 PA2-0212100 - -

Yellow 25 PA2-0304025C PA2-0305025C PA2-0306025C PA2-0308025C PA2-0310025C PA2-0312025C PA2-0314025C PA2-0316025C

Yellow 100 PA2-0304100 - PA2-0306100 PA2-0308100 PA2-0310100 PA2-0312100 - -

Blue 25 PA2-0504025C PA2-0505025C PA2-0506025C PA2-0508025C PA2-0510025C PA2-0512025C PA2-0514025C PA2-0516025C

Blue 100 PA2-0504100 - PA2-0506100 PA2-0508100 PA2-0510100 PA2-0512100 - -

Black 25 PA2-0704025C PA2-0705025C PA2-0706025C PA2-0708025C PA2-0710025C PA2-0712025C PA2-0714025C PA2-0716025C

Black 100 PA2-0704100 - PA2-0706100 PA2-0708100 PA2-0710100 PA2-0712100 - -

Silver 25 PA2-0904025C PA2-0905025C PA2-0906025C PA2-0908025C PA2-0910025C PA2-0912025C PA2-0914025C PA2-0916025C

Silver 100 PA2-0904100 - PA2-0906100 PA2-0908100 PA2-0910100 PA2-0912100 - -

PA2-0˙˙˙˙˙˙˙

Technical data

Option selector

Colour Substitute

Natural 0

Red 1

Green 2

Yellow 3

Blue 5

Black 7

Silver 9

Packaging Substitute

25 m Carton/Box C

100 m Plastic bag None

Length (m)* Substitute

25 025

100 100

Outer diameter Substitute

3 03

4 04

5 05

6 06

8 08

10 10

12 12

14 14

16 16

*Tube size does not conform to DIN 74324


6-03For further information www.norgren.com/rail

Nylon tube PA2

Ø 3 ... 16 mm

Ø 3 Ø 4 Ø 5 Ø 6 Ø 8 Ø 10 Ø 12 Ø 14 Ø 16

Max. pressure (bar)* at -40 ... +20°C - 31 33 27 19 19 19 16 19

Min. bend radius - 25 25 30 40 60 60 80 95

Tubing channels

Model Tube Ø No. of channels

Tube clips – single sided

Model Tube ØNumber of tubes

Tube cutter

Model Description

100HA0600 6 10 34021804 6 1 M/3314 Cutter

100HA0800 8 10 34021904 6 2 39012010 Replacement blade (pack of 10)

100H61200 12 6 34021805 8 1 39012061 Replacement blade (1-off)

34021905 8 2

34021806 10 1

34021906 10 2

34021807 12 1

34021907 12 2

34021508 16 1

Working temperature

Factor (Nylon)

–40 ... +20°C 1,00

+30°C 0,83

+40°C 0,75

+50°C 0,64

+60°C 0,57

+80°C 0,47

Maximum operating pressures and bend radi

Accessories

Operating pressure/temperature conversion factors

Maximum continuous working temperature: nylon +80°C

* Multiply by factors in table below for use at higher temperatures

To calculate working pressures at various temperatures, multipy working pressure at -40 ... +20°C by factor given in tableMaximum continuous working temperature: +80°C



Nylon tube PA

Ø 1/8” ... 3/4”

Available in a range of colours for ease of identification

Medium: Compressed air. Consult our Technical Service for use with other fluids

Operating pressure: Refer to specific tubing type on the following pages

Ambient temperature: Refer to specific tubing type on the following pages

Technical featuresMaterials Nylon (polyamide) type 11 or 12, fully plasticised

+20°C (+68°F)

-40°C (-40°F)

Colour Length (inch)

O/D I/D tube1⁄8”0,065”

5⁄32 ”0,100”

3⁄16”0,125”

1⁄4”0,175”

5⁄16”0,215”

3⁄8”0,260”

1⁄2”0.370”

5⁄8”0,470”

3⁄4”0,590”

Natural 50’ coils PA0051050C PA0052050C PA0053050C PA0054050C PA0055050C PA0056050C PA0057050C PA0058050 PA0059050

Red 50’ coils – PA0152050C PA0153050C PA0154050C PA0155050C PA0156050C PA0157050C – PA0159050

Black 50’ coils PA0751050C PA0752050C PA0753050C PA0754050C PA0755050C PA0756050C PA0157050C – –

Blue 50’ coils PA0551050C PA0552050C PA0553050C PA0554050C PA0555050C PA0556050C PA0557050C – –

Brown 50’ coils – PA0452050C PA0453050C PA0454050C PA0455050C PA0456050C PA0457050C – –

Green 50’ coils PA0251050C PA0252050C PA0253050C PA0254050C PA0255050C PA0256050C PA0257050C – –

Yellow 50’ coils PA0351050C PA0352050C PA0353050C PA0354050C PA0355050C PA0356050C PA0257050C – –

PA0˙5˙050˙

Technical data

Option selector

Colour Substitute

Natural 0

Red 1

Green 2

Yellow 3

Brown 4

Blue 5

Black 7

Cartons Substitute

Without None

With C

Outer diameter Substitute

1/8” 1

5/32” 2

3/16” 3

1/4” 4

5/16” 5

3/8” 6

1/2” 7

5/8” 8

3/4” 9



Nylon tube PA

Ø 1/8” ... 3/4”

Colour Length (inch)

O/D I/D tube1⁄8”0,065”

5⁄32 ”0,100”

3⁄16”0,125”

1⁄4”0,175”

5⁄16”0,215”

3⁄8”0,260”

1⁄2”0.370”

5⁄8”0,470”

3⁄4”0,590”

Natural 50’ coils PA0051050C PA0052050C PA0053050C PA0054050C PA0055050C PA0056050C PA0057050C PA0058050 PA0059050

Red 50’ coils – PA0152050C PA0153050C PA0154050C PA0155050C PA0156050C PA0157050C – PA0159050

Black 50’ coils PA0751050C PA0752050C PA0753050C PA0754050C PA0755050C PA0756050C PA0157050C – –

Blue 50’ coils PA0551050C PA0552050C PA0553050C PA0554050C PA0555050C PA0556050C PA0557050C – –

Brown 50’ coils – PA0452050C PA0453050C PA0454050C PA0455050C PA0456050C PA0457050C – –

Green 50’ coils PA0251050C PA0252050C PA0253050C PA0254050C PA0255050C PA0256050C PA0257050C – –

Yellow 50’ coils PA0351050C PA0352050C PA0353050C PA0354050C PA0355050C PA0356050C PA0257050C – –

Ø 1/8” Ø 5/32” Ø 3/16” Ø 1/4” Ø 5/16” Ø 3/8” Ø 1/8” Ø 5/8” Ø 3/4”

Max. pressure (bar)* at -40 ... +20°C 28 26 21,8 20 19,3 18,2 14,5 13,2 10,8

Min. bend radius 0,8” 1” 1,5” 1,7” 2” 2,5” 3” 4” 6”

Working temperature

Factor (Nylon)

–40 ... +20°C 1,00

+30°C 0,83

+40°C 0,75

+50°C 0,64

+60°C 0,57

+80°C 0,47

Maximum operating pressures and bend radi

Operating pressure/temperature conversion factors

Maximum continuous working temperature: nylon +80°C

* Multiply by factors in table below for use at higher temperatures

To calculate working pressures at various temperatures, multipy working pressure at -40 ... +20°C by factor given in tableMaximum continuous working temperature: +80°C

Tube cutter

Model Description

M/3314 Cutter

39012010 Replacement blade (pack of 10)

39012061 Replacement blade (1-off)

Tube clips single sided


34021803 3/16” 1

34021903 3/16” 2

34021804 1/4” 1

34021904 1/4” 2

34021805 5/16” 1

34021905 5/16” 2

34021806 3/8” 1

34021906 3/8” 2

34021807 1/2” 1

34021807 1/2” 2

34021508 5/8” 1

34021509 3/4” 1

Accessories



Rail vehicle approved nylon tubing LPA2, LPA3

Ø 6 ... 12 mm

+100°C (+212°F)

-60°C (-76°F)

Fire and smoke resistant nylon tubing designed for applications on railway vehicles

Tube tested and conforming to the following standards; DIN 54 837: 2007-12 DIN EN ISO 5659-2: 2007 DIN 5510: 2007-10 (see details below). Smoke toxicity test to DIN5110-2:2009-05

Additionally tested and conforming to; NF X 70-100 : 2006 NF X - 10-702 : 1995 (see details below)

Dimensionally compatible with DIN 74324

Suitable for use with Norgren Fleetfit vehicle fittings

Medium: Compressed airDimensional standard: Conforming to DIN 74324Operating pressure: See below

Operating temperature: -60 ... +100°C max. (-76 ... +212°F max.) Note: pressure/temperature conversations factor see below

Tube colour: GreyStandard length: 50 m

Technical featuresMaterials Vestamide Nylon PA12

Outer Ø

(mm)

Wall thickness (mm)

Inner Ø

(mm)

Operating pressure at 20°C max.* (bar)

Burst pressure at 20°C (bar)

Min. bend radius(mm)

6 1 4 26 78 30

8 1 6 19 57 50

8 1,5 5 30 90 50

10 1 8 14 42 20

12 1,5 9 19 57 30

* Multiply by factors in the below table for use at higher temperatures

Flamibility class S 4

Smoke development class SR 2

Dripping class ST 2

Toxicity (request test report)

Test standard NF X 70 – 100 : 2006

Fire tests - Analysis of gaseous effluents - Part 2: Tubular furnace thermal degradation method

NF X 10 – 702 : 1995

Fire test methods - Determination of the opacity of the fumes in an atmosphere without air renewal

Classification standard NF F 16 – 101 : 1988

Rolling stock - Fire behaviour - Materials choosing

Test result The requirements of Class F 2 were fulfilled

Working temperature Factor

-60 ... +20°C 1

-60 ... +30°C 0,83

-60 ... +40°C 0,72

-60 ... +50°C 0,64

-60 ... +60°C 0,57

-60 ... +70°C 0,52

-60 ... +80°C 0,47

-60 ... +90°C 0,44

-60 ... +100°C 0,36

Technical data

Testing results DIN 5510-2 Additional testing

Pressure/temperature conversation factors



Rail vehicle approved nylon tubing LPA2, LPA3

Ø 6 ... 12 mm

Colour Coillength (m)

Outer Ø

(mm)

Wall thickness (mm)

Inner Ø

(mm)

Model

Grey 50 6 1 4 LPA2-0606050

Grey 50 8 1 6 LPA2-0608050

Grey 50 8* 1,5* 5 LPA3-0608050

Grey 50 10 1 8 LPA2-0610050

Grey 50 12 1,5 9 LPA2-0612050

* Tube size does not conform to DIN 74324

Tube cutter

Model Description

M/3314 Cutter

39012010 Replacement blade (pack of 10)

39012061 Replacement blade (1-off)

Fittings

For fittings conforming to DIN 74324 see the Fleetfit range on page 5-14

Tube clips single sided


34021804 6 1

34021904 6 2

34021805 8 1

34021905 8 2

34021806 10 1

34021906 10 2

34021807 12 1

34021907 12 2

Order numbers

Accessories

Fittings

LPA˙-06˙˙050Option selectorTube size to DIN 74324 Substitute

Conforming 2

Non conforming 3

Tube size Substitute

6 06

8 08

10 10

12 12


FOUR STAGE FILTRATION SYSTEM

ALUMINIUM FITTINGS ARE 65% LIGHTER

MODULAR DOOR CONTROL ASSEMBLY

“ Innovation that improved reliability also improved performance and passenger safety”

Pneumatic door systems mounted separately in the ceiling of class 14X, 15X and 170 vehicles along with piping and regulators suffered from poor reliability, causing frequent delays to schedules

FOUR STAGE FILTRATION SYSTEM

Designed to remove oil and water carried through to the vehicle sub-systems,

increased reliability and reduced both maintenance and system failure costs.

ALUMINIUM FITTINGS ARE 65% LIGHTER

Lighter than conventional brass fittings, Norgren aluminium fittings are installed

without specialist tools and connections can be re-made without damaging tubing.

They can replace conventional fittings in most pneumatic applications including

auxiliary systems, door controls and brakes.

Visit norgren.com/rail

‘Rail industry innovation’

Door control assembly

A Norgren custom-built replacement was designed to be easier to replace and engineered to a

higher specification to eliminate the need for individually piped and wired valves. The simplified

design comprised a single plug-in block that housed Nugget 40 valves with T20 regulators.

The ‘modular door control assembly’ achieved the customers’ goal of a key system with

greater reliability that took less time to replace. In addition, the new replacement improved

performance and safety.

courtesy ofTrain Door Solutions Ltd. (TDS)


TUBING - Norgren Pneumatics. Motion Control Equipment, Fluid

Documents

Transcript of TUBING - Norgren Pneumatics. Motion Control Equipment, Fluid