Norgren in the truck industryeurodotcorp.ru/files/uploads/norgren/en.P545-584.pdf · Norgren nylon...
Transcript of Norgren in the truck industryeurodotcorp.ru/files/uploads/norgren/en.P545-584.pdf · Norgren nylon...
1] Integrated valve/cylinder unit for a gearshift control.2] Modular cartridge valve integrated in a transmission
intarder.3] Retarder with proportional control unit.4] Vehicle manifolds with DOT / SAE cartridges cut
assembly time, weight and space.5] Sealco valve has integrated push-in cartridges for
quick assembly.6) Special twin valve
Norgren in the truck industryNorgren is a leading international supplier of on-board pneumatic andelectronic solutions, with over thirty years’ experience in the commercialvehicle industry.
Modular powertrain solutionsNorgren’s expertise lies in adapting standard modularvalves and proportional valves for use in specialmanifolds or housings. These customised solutions are often integrated in thepowertrain component.
•Proven technology•Cost-effective customisation •Meet space requirements •Housing ensures protection of mechanical andelectrical components
•Common pneumatic and electrical connections •Ease and speed of assembly
Increased chassis throughputNorgren provides a total fittings system solution for airbrake and auxiliary air systems.
Norgren provides total fittings system solutionsNorgren expertise on-board coaches and buses:
•Ventilation flaps and air conditioning systems•Pneumatic and electric door systems•Anti jack-knifing control systems•Kneeling systems•High pressure valves for compressed natural gas
Norgren products are used in the cab for:• Instrumentation•Air seat•Visual indicators•Air horn
ON-BOARD SOLUTIONS
Please visit Norgren dedicated site at
Fittings
www.norgren.com/info/en546546
Technical dataMedium:Compressed air. Consult ourTechnical Service for use withother fluids.
Operating pressure:Refer to specific tubing type onthe following pages.
Ambient temperature:Refer to specific tubing type onthe following pages.
MaterialsNylon tube: nylon (polyamide)type 12, fully plasticised and lightstabilised. metric tube meets therequirements of DIN 73378 andBS 5409.Polyurethane tube: is lightstabilised and has a hardness of92-98 shore A.Nylon tube (food grade): nylon(polyamide) type 11 or 12unplasticised.
Tubing and hoses Ø 4 to 28 mm O/D Ø Â" to 1Â" O/D
Polyester reinforced PVC: highquality electrically non-conductiveplasticised PVC hose, high tensilepolyester fibre braiding,galvanised steel 'O' clips andbrass tailpieces on assembledhoses. Metal braided hoses: E90 nitrilerubber hose, galvanised steelbraiding wire, brass ferrules,copper tailpieces.
Copper tube: phosphorous de-oxidised copper to BS6017 gradeCu-DHP.Double wall brazed steel: coppercoated steel strip with tinnedexternal surface (Bundy).Weldtube: polyurethane (95°shore A) inner tube, flameretardant PVC outer tube.
Tube sizes (metric)
Tube sizes (inch)
Maximum working pressures Pressure/temperatureconversion factors
Maximum continuous working temperature: nylon +80°C, polyurethane +60°C.*Multiply by factors in table alongside for use at higher temperatures.**Extraflexible tube
Available in a variety ofdifferent types to suit a widerange of applications.All tubing can be used withspecific ranges of tube fittingsshown in this catalogue.Nylon and polyurethane tubeavailable in a range of coloursfor ease of identification.
Nylon ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Polyurethane ¬ ¬ ¬ ¬ ¬ ¬Polyester reinforced PVC ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Metal braided ¬ ¬ ¬ ¬ ¬ ¬Copper-half hard and annealed¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Bundy ¬ ¬ ¬ ¬
OO//DD mmmm 44 55 66 88 1100 1122 1144 1166 2222 2288
Nylon ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Nylon (food grade) ¬ ¬ ¬ ¬Polyester reinforced PVC ¬ ¬ ¬ ¬ ¬ ¬ ¬Metal braided ¬ ¬ ¬ ¬ ¬Copper-half hard and annealed ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Copper heavy duty ¬ ¬ ¬ ¬ ¬ ¬ ¬ ¬Bundy ¬ ¬ ¬ ¬ ¬ ¬
11//88 55//3322 33//1166 11//44 55//1166 33//88 11//22 55//88 33//44 77//88 1111//88O/D inches
Max. pressure (bar)* Nylonat -40°C to + 20°C PolyurethaneMin. bend radius mm Nylon
Polyurethane
28 31 25 19 10 24 8 18 6 15 6 18 15 1510 11 9 9 – 9 – 9 – – – – – –25 25 30 50 60 75 80 95 125 1607 9 16 17 – 25 – – – – – – –
OO//DD mmmm 44 55 66 88 88**** 1100 1100**** 1122 1122**** 1144 1155**** 1166 2222 2288+30°C 0,83+40°C 0,72+50°C 0,64+60°C 0,57+80°C 0,47
Working Temperature Factor
547
Natural 25 PU0004025CNatural 100 PU0004100CBlack 25 PU0704025CBlack 100 PU0704100CBlue 25 PU0504025CBlue 100 PU0504100CRed 25 PU0104025CRed 100 PU0104100CYellow 25 PU0304025CYellow 100 PU0304100CGreen 25 PU0204025CGreen 100 PU0204100C
Natural 15 PA0004015CNatural 25 PA0004025CNatural 100 PA0004100CBlack 15 PA0704015CBlack 25 PA0704025CBlack 100 PA0704100CBlue 15 PA0504015CBlue 25 PA0504025CBlue 100 PA0504100CRed 15 PA0104015CRed 25 PA0104025CRed 100 PA0104100CYellow 15 PA0304015CYellow 25 PA0304025CYellow 100 PA0304100CGreen 15 PA0204025CGreen 100 PA0204100C
OO//DD--II//DDmmmm LLeennggtthh 44//22,,55 66//44 88//66CCoolloouurr ((mm))Corporate Red 25 PA0804025Corporate Grey 25 PA0604025
Nylon to DIN 73378, DIN 74324 and BS5409-1 : 1976 table 2
Polyurethane
Norgren nylon tubing to DIN 73378,DIN 74324 and BS5409-1 : 1976 table 2
Weldtube
The colours are for the outer PVC cover. tubing is supplied shrink-wrapped in 25 m coils. Other colours can be supplied for orders of sufficient quantity.Tubing can also be supplied in longer lengths subject to economic order quantities. inch tube also available.
Extraflex nylon PS11
PA0806025 PA0808025PA0606025 PA0608025
PU0005025C PU0006025C PU0008025C PU0010025C PU0012025CPU0005100C PU0006100C PU0008100D PU0010100D PU0012100DPU0705025C PU0706025C PU0708025C PU0710025C PU0712025CPU0705100C PU0706100C PU0708100D PU0710100D PU0712100DPU0505025C PU0506025C PU0508025C PU0510025C PU0512025CPU0505100C PU0506100C PU0508100D PU0510100D PU0512100DPU0105025C PU0106025C PU0108025C PU0110025C PU0112025CPU0105100C PU0106100C PU0108100D PU0110100D PU0112100DPU0305025C PU0306025C PU0308025C PU0310025C PU0312025CPU0305100C PU0306100C PU0308100D PU0310100D PU0312100DOptions PU0206025C PU0208025C Options OptionsOptions PU0206100C PU0208100D PU0210100D PU0212100D
PA0005015C PA0006015C PA0008015C PA0010015C PA0012015C PA0014015C PA0016015C PA0022015C PA0028015CPA0005025C PA0006025C PA0008025C PA0010025C PA0012025C PA0014025C PA0016025C PA0022025C PA0028025CPA0005100C PA0006100C PA0008100C PA0010100C PA0012100C PA0014100C – – –PA0705015C PA0706015C PA0708015C PA0710015C PA0712015C – – – –PA0705025C PA0706025C PA0708025C PA0710025C PA0712025C PA0714025C – – –PA0705100C PA0706100C PA0708100C PA0710100C PA0712100C PA0714100C – – –PA0505015C PA0506015C PA0508015C PA0510015C PA0512015C – – – –PA0505025C PA0506025C PA0508025C PA0510025C PA0512025C PA0514025C – – –PA0505100C PA0506100C PA0508100C PA0510100C PA0512100C PA0514100C – – –PA0105015C PA0106015C PA0108015C PA0110015C PA0112015C – – – –PA0105025C PA0106025C PA0108025C PA0110025C PA0112025C PA0114025C – – –PA0105100C PA0106100C PA0108100C PA0110100C PA0112100C PA0114100C – – –PA0305015C PA0306015C PA0308015C PA0310015C PA0312015C PA0314015C – – –PA0305025C PA0306025C PA0308025C PA0310025C PA0312025C PA0314025C – – –PA0305100C PA0306100C PA0308100C PA0310100C PA0312100C PA0314100C – – –PA0205015C PA0206015C PA0208015C PA0210015C PA0212015C PA0214025C – – –PA0205100C PA0206100C PA0208100C PA0210100C PA0212100C PA0214100C – – –
Inch range also available
Key: (D) = Drum (C) = coil
44//22,,55 55//33 66//44 88//66 1100//77,,55 1122//99 1144//1111 1166//1122 2222//1177 2288//2222O/D I/DColour
Length(m)
44//22,,55 55//33 66//44 88//55,,55 1100//77 1122//88O/D I/DColour
Length(m)
8 6 4 10 40 Black WT47060258 6 4 10 40 Red WT41060258 6 4 10 40 Green WT42060258 6 4 10 40 Blue WT450602510 8 6 10 50 Black WT470802510 8 6 10 50 Red WT410802510 8 6 10 50 Green WT420802510 8 6 10 50 Blue WT450802512,5 10 7 10 65 Black WT471002512,5 10 7 10 65 Red WT411002512,5 10 7 10 65 Green WT421002512,5 10 7 10 65 Blue WT451002514,5 12 9 10 75 Black WT471202514,5 12 9 10 75 Red WT411202514,5 12 9 10 75 Green WT421202514,5 12 9 10 75 Blue WT4512025
OO//DDOOuutteerr ttuubbee ((mmmm))
OO//DDIInnnneerr ttuubbee ((mmmm))
II//DDIInnnneerr ttuubbee ((mmmm))
MMaaxx.. rreeccoommmmeennddeedd wwoorrkkiinngg pprreessssuurree ((bbaarr))
BBeennddrraaddiiuuss ((mmmm))
CCoolloouurr
Natural 25 PS0008025 PS0010025 PS0012025 PS0015025
88//66 1100//88 1122//1100 1155//1122,,55O/D I/DColour
Length(m)
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
Fittings
548
PA Pneuflex spring coils
PU Pneuflex spring coils
Mounting method: swivel fittings with male threads at both ends.Coils are coloured yellow. Other colours can be supplied to order.*All adaptors thread are BSPT except Ë BSPP male thread.
Weldtube
6 x 4 R1⁄8 165 2000 10 PU3106002186 x 4 R1⁄8 350 4000 10 PU3106004186 x 4 R1⁄8 545 6000 10 PU3106006186 x 4 R1⁄8 720 8000 10 PU3106008188 x 5 R1⁄4 180 2000 10 PU3108002288 x 5 R1⁄4 400 4000 10 PU3108004288 x 5 R1⁄4 630 6000 10 PU3108006288 x 5 R1⁄4 800 8000 10 PU31080082810 x 6,5 R1⁄4 185 2000 9 PU31100022810 x 6,5 R1⁄4 400 4000 9 PU31100042810 x 6,5 R1⁄4 635 6000 9 PU31100062810 x 6,5 R1⁄4 800 8000 9 PU31100082812 x 8 R3⁄8 180 2000 9 PU31120023812 x 8 R3⁄8 390 4000 9 PU31120043812 x 8 R3⁄8 590 6000 9 PU31120063812 x 8 R3⁄8 780 8000 9 PU311200838
OO//DDTTuube
AAddaappttoorr((tthhrreeaadd))
LLeennggtthh ooff cclloosseeddssppiirraall ((mmmm))
WWoorrkkiinngg lleennggtthh((mmmm))
OOppeerraattiinngg pprreessssuurreeaatt ++2200°°CC ((bbaarr))
6 R1⁄4 200 3000 31 PA3306003286 R1⁄4 250 3750 31 PA3306004286 R1⁄4 333 5000 31 PA3306005286 R1⁄4 500 7500 31 PA3306008286 R1⁄4 1000 15000 31 PA3306015288 R1⁄4 200 3000 22 PA3308003288 R1⁄4 250 3750 22 PA3308004288 R1⁄4 333 5000 22 PA3308005288 R1⁄4 500 7500 22 PA3308008288 R1⁄4 1000 15000 22 PA33080152810 R1⁄4 210 3000 17 PA33100032810 R1⁄4 262 3750 17 PA33100042810 R1⁄4 350 5000 17 PA33100052810 R1⁄4 525 7500 17 PA33100082810 R1⁄4 1000 15000 17 PA33100152812 R3⁄8 200 3000 12 PA33120033812 R3⁄8 250 3750 12 PA33120043812 R3⁄8 333 5000 12 PA33120053812 R3⁄8 500 7500 12 PA33120083812 R3⁄8 1000 15000 12 PA331201538*15 G1⁄2A 166 3000 17 PA331500348*15 G1⁄2A 207 3750 17 PA331500448*15 G1⁄2A 277 5000 17 PA331500548*15 G1⁄2A 415 7500 17 PA331500848
OO//DDTTuube
AAddaappttoorr((tthhrreeaadd))
LLeennggtthh ooff cclloosseeddssppiirraall ((mmmm))
WWoorrkkiinngg lleennggtthh((mmmm))
OOppeerraattiinngg pprreessssuurreeaatt ++2200°°CC ((bbaarr))
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
BSPT male thread
549
44 55 66 88 1100 11226699 6699 6699 6699 6699 4477
Terylene braided PVC hose assemblies
Operating temperature: -20°C to +70°C. *Maximum working pressure at +20°C.For use at temperatures above +20°C, consult our Technical Service.
*Maximum working pressure at -20°C to +100°C for fluids other than compressed air. Maximum with compressed air is 10 bar.IInnssttaallllaattiioonn nnootteess--1. Flexible hose is weakened when installed in a twisted position.2. Ample bend radius should be allowed to avoid collapsing the hose.3. When hose is installed in a flexing application remember that metal end fittings are not part of the flexible portion.4. Use elbows or adaptors to eliminate excess hose bends.
30m terylene braided hose coils, ‘O’ clips and pincers
*Maximum working pressure at +20˚C.For temperatures above +20°C, consult our Technical Service.
**State length of hose required if ordering non-standard lengths.
State length of hose required when ordering. Maximum length 30 m.
ttoo oorrddeerr ''OO'' cclliipp
**** LLeennggtthh
A special pair of pincers, product number 39001400,is available for crimping ‘O’ clips to hose.IInnssttrruuccttiioonnss1. Cut off the desired length of hose2. Insert reusable tailpieces3. Slip on the clips4. Clamp tightly with pincers
Metal braided rubber hose
Product number 30 m hose PV 2008030 PV 2010030 PV 2012030 PV 2014030 PV 2016030 PV 2019030 PV 2027030 PV 2033030‘O’ clips for above O/D hoses 48 0168 02 48 0168 03 48 0168 04 48 0168 05 48 0168 06 48 0168 07 48 0168 11 48 0168 15Special pincers for ‘O’ clips 39 0014 00
88 1100 1122 1133,,55 1166 1188,,55 2277 333333 55 66,,33 88 1100 1122,,55 2200 22551100 1100 1100 1100 1100 99 77 66
OO//DD mmmm BBoorreePPrreessssuurree ((bbaarr))**
To order. 155 mm min. 42 0020 00 000 42 0030 00 000 42 0040 00 000 42 0050 00 000 42 0060 00 000 42 0070 00 000250 mm 42 0020 00 000 42 0030 00 250 42 0040 00 250 42 0050 00 250 42 0060 00 250 42 0070 00 250300 mm 42 0020 00 000 42 0030 00 300 42 0040 00 300 42 0050 00 300 42 0060 00 300 42 0070 00 300350 mm 42 0020 00 000 42 0030 00 350 42 0040 00 350 42 0050 00 350 42 0060 00 350 42 0070 00 350400 mm 42 0020 00 000 42 0030 00 400 42 0040 00 400 42 0050 00 400 42 0060 00 400 42 0070 00 400500 mm 42 0020 00 000 42 0030 00 500 42 0040 00 500 42 0050 00 500 42 0060 00 500 42 0070 00 500600 mm 42 0020 00 000 42 0030 00 600 42 0040 00 600 42 0050 00 600 42 0060 00 600 42 0070 00 600750 mm 42 0020 00 000 42 0030 00 750 42 0040 00 750 42 0050 00 750 42 0060 00 750 42 0070 00 7501000 mm 42 0020 00 000 42 0030 01 000 42 0040 01 000 42 0050 01 000 42 0060 01 000 42 0070 01 000
00//DD mmmmPPrreessssuurree ((bbaarr))**LLeennggtthh
To order 30 m max. 42 0200 00 000 42 0210 00 000 42 0220 00 000 42 0230 00 000 42 0240 00 000 42 0250 00 000 42 0260 00 000 42 0270 00 000 42 0280 00 000
44 55 66 88 1100 1122 1166 2222 22881100 1100 1100 1100 1100 1100 99 77 662288 2288 3311,,55 3311,,55 4488,,55 4488,,55 5500,,55 7700 222255
OO//DD mmmmPPrreessssuurree bbaarr**MMiinn bbeenndd rraaddiiuuss mmmm
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
Fittings
550
Copper tubing to BS 2871 : Part 2 with dimensions generally to table 4
Bundy tube - double wall brazed steel tube 3 m straight (10 ft)
*Recommended safe working pressure at -200°C to +50°C. For higher temperatures, multiply by factor in table below.
*Maximum working pressure for straight length, non-pulsating pressures, when used withcompression tube fittings shown in this catalogue.
10 m coil Annealed CS6004010 CS 6005010 CS 6006010 CS6008010 CS 60100103 m straight Annealed CS 6012003 CS 6016003 CS 6022003 CS 6028003
4/2,8 5/3,4 6/4,4 8/6,4 10/8,4 12/9,6 16/13,6 22/19,0 28/25,0128 138 112 81 64 81 59 53 41
0/D-I/D mmPressure (bar)*Length
Type
3 m straight Half hard CS 7004003 CS 7005003 CS 7006003 CS 7008003 CS 7010003 CS 7012003 CS 7016003 CS 7022003 CS 7028003
44//22,,88 55//33,,44 66//44,,00 88//66,,00 1100//77,,66 1122//99,,66 1166//1133,,66 2222//1199,,00 2288//2255,,00119933 220088 221188 115577 115500 112222 8899 8811 6622
0/D-I/D mmPressure (bar)*Length
3 m straight BU 6306003 BU 6308003 BU 6210003 BU 6212003
6 8 10 12300 250 195 160
0/D mm Pressure (bar)* at +20°CLength
Type
+50˚C to + 100˚C 0,97 0,95+100˚C to +150˚C 0,82 0,88+150˚C to +175˚C 0,63 0,54+175˚C to +200˚C 0,43 0,29
WorkingTemperature
Factor Half HardCopper
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
551
Maximum working pressures
*Multiply by factor in table alongside for use at higher temperatures. Maximum continuous working temperature 80˚C.
Pressure/temperatureconversion factors
Metal braided rubber hose - inch
*State length of hose required if ordering non-standard lengths.Minimum length 6".When installing a flexible hose the following simple rules should benoted.
1. Flexible hose is weakened when installed in a twisted position.
2. Ample bend radius should be allowed to avoid collapsing the hose.
3. When hose is installed in a flexing application remember that metal end fittings are not part of the flexible portion.
4. Use elbows or adaptors to eliminate excess hose bends.
Nylon tubing
**State length of hose required if ordering non-standard lengths.
**** LLeennggtthh
Natural 50' PA0051050C PA0053050C PA0054050C PA0055050C PA0056050C PA0057050C PA0058050 PA0059050250' PA0051250 PA0053250 PA0054250 PA0055250 PA0056250 PA0057250 – –500' – – – – PA0056500 PA0057500 – –2000' – PA0053B00D PA0054B00D – – – – –
Blue 50' PA0551050C PA0553050C PA0554050C PA0555050C PA0556050C PA0557050C – –Red 50' PA0153050C PA0154050C PA0155050C PA0156050C PA0157050C – –Black 50' PA0751050C PA0753050C PA0754050C PA0755050C PA0756050C PA0757050C – –Green 50' PA0251050C PA0253050C PA0254050C PA0255050C PA0256050C PA0257050C – –Yellow 50' PA0351050C PA0353050C PA0354050C PA0355050C PA0356050C PA0357050C – –Brown 50' – PA0453050C PA0454050C PA0455050C PA0456050C PA0457050C – –
1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"Colour
O/DLength
Min. bend radius 0,75" 1,50" 1,75" 2,00" 2,50" 3,00" 4,00" 6,00"
11//88"" 33//1166"" 11//44"" 55//1166"" 33//88"" 11//22"" 55//88"" 33//44""
2288,,00 2211,,88 2200,,00 1199,,33 1188,,22 1144,,55 1133,,22 1100,,88
OO//DDMMaaxx.. pprreessssuurree ((bbaarr))**aatt --4400°°CC ttoo ++2200°°CC
+30°C 0,83+40°C 0,72+50°C 0,64+60°C 0,57+80°C 0,47
WorkingTemperature Factor
33//1166"" 11//44"" 55//1166"" 33//88"" 11//22""6699 6699 6699 6699 4477
41 0633 00 00041 0633 00 10041 0633 00 12041 0633 00 14041 0633 00 16041 0633 00 18041 0633 00 20041 0633 00 24041 0633 00 30041 0633 00 360
OO//DD mmmmPPrreessssuurree ((bbaarr))**LLeennggtthhTo order 6 min. 41 0634 00 000 41 0635 00 000 41 0636 00 000 41 0638 00 00010 41 0634 00 100 41 0635 00 100 41 0636 00 100 41 0638 00 10012 41 0634 00 120 41 0635 00 120 41 0636 00 120 41 0638 00 12014 41 0634 00 140 41 0635 00 140 41 0636 00 140 41 0638 00 14016 41 0634 00 160 41 0635 00 160 41 0636 00 160 41 0638 00 16018 41 0634 00 180 41 0635 00 180 41 0636 00 180 41 0638 00 18020 41 0634 00 200 41 0635 00 200 41 0636 00 200 41 0638 00 20024 41 0634 00 240 41 0635 00 240 41 0636 00 240 41 0638 00 24030 41 0634 00 300 41 0635 00 300 41 0636 00 300 41 0638 00 30036 41 0634 00 360 41 0635 00 360 41 0636 00 360 41 0638 00 360
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
Fittings
552
Copper tubing to BS 2871 Standard duty: annealed
Bundy tube - double wall brazed steel tube 3 m straight (10 ft)
*Recommended safe working pressure at -200°C to +50°C. For higher temperatures, multiply by factor in table below.
*Maximum working pressure for straight length, non-pulsating pressures, when used with compression tube fittings shown inthis catalogue.
33 ft. coil Annealed CS6051033 CS 6052033 CS 6053033 CS 6054033 CS 6055033 CS 605603310 ft. straight Annealed CS 6057010 CS 6058010 CS 6059010 CS 6060010 CS 6062010
1/8 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 11/8 0,069 0,100 0,131 0,178 0,240 0,303 0,404 0,529 0,622 0,747 0,99 205 156 126 120 94 77 77 60 68 57 44
0/D-I/D mmPressure (bar)*Length Type
10 ft. straight Heavy duty CH6053010 CH 6054010 CH6055010 CH 6056010 CH 6057010 CH 6058010 CH 6059010 CH 6060010
3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/80,115 0,154 0,216 0,279 0,372 0,497 0,590 0,747126 120 94 77 77 60 68 111
0/D-I/D mmPressure (bar)*Length Type
10 ft. straight Half hard CS7051010 CS 7052010 CS7053010 CS7054010 CS7055010 CS7056010 CS7057010 CS7058010 CS7059010 CS7060010 CS7062010
1/8 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 11/8 0,069 0,100 0,131 0,178 0,240 0,303 0,404 0,529 0,622 0,747 0,997 313 238 192 184 143 117 117 92 103 87 67
0/D-I/D mmPressure (bar)*Length Type
+50°C to + 100°C 0,97 0,95+100°C to +150°C 0,82 0,88+150°C to +175°C 0,63 0,54+175°C to +200°C 0,43 0,29
WorkingTemperature Factor
Half HardCopper
10 ft. straight BU6352010 BU 6353010 BU 6354010 BU 6356010 BU 6357010
5/32 3/16 1/4 3/8 1/2380 340 300 195 160
0/D mm Pressure (bar)* at +20°CLength
Tubing and hoses Ø 4 to 28 mm O/D
Ø Â" to 1Â" O/D
553
10 100HA050010 100HA060010 100HA08006 100H61200
50 34 0380 1181 34 0380 1235 34 0380 0150 34 0380 0275 34 0380 03
Tubing accessories
Nylon tube ties
Tube cutter
Nylon tube ties
Tubing clips - single sided
Self-tapping screw, 48003424, is available for clips on tubes up to and including 12 mm O/D. For larger sizes use a 6 mm bolt.
Tubing ties
Operating temperature:–50°C to +85°C
Minimum tensile strength:13,61 kg - locking type
27,21 kg - releasable type
Tubing channels
Weldtube stripper
*Pack of 10** 1-offFor use on nylon and polyurethane tubing 4 to 16 mmand Â" to Ë" O/D tube.
Releasable
Lockable
Type
Mounting cradleConfined spaceFor releasable tiesFor lockable tiesCable tie mounting plate for up to 3 bundles
Type
Cutter M/3314Replacement blade 39 0120 10*Replacement blade 39 0120 61**
TypeStripper 39004100Spare blades (pack of 2) 39004160
Type
Maximumbundle Ø mm
O/DTube
NNoo.. ooffcchhaannnneellss
Single sided 1 34 0218 02 34 0218 03 34 0218 04 34 0218 05 34 0218 06 34 0218 07 34 0215 08 34 0215 09 36 0001 10 34 0215 112 34 0219 02 34 0219 03 34 0219 04 34 0219 05 34 0219 063 34 0220 02 34 0220 03 34 0220 04 34 0220 05 34 0220 06
Double sided 2 34 0216 08 34 0216 09 34 0216 11
44 55 && 33//1166 66 && 11//44 88 && 55//1166 1100 && 33//88 1122 && 11//22 1166 && 55//88 33//44 2222 2288mmmm && iinncchh OO//DD ttuubbeess TTyyppee
NNoo.. ooffttuubbeess
34 0380 2134 0380 2234 0380 2334 0380 2434 0380 25
For nylon, polyurethane, copper and steel tube
Fittings
www.norgren.com/info/en554554
Ball valves 60, 61, 62 and NVC Series BrassÂ" to 4" BSP
Port sizesG1/8, G1/4, G3/8, G1/2, G3/4, G1, G1Ê, G1Ë, G2,G2Ë, G3, G4Rc1/4, Rc3/8, Rc1/2, Rc3/4, Rc1, Rc1Ê
Technical dataMedium:Compressed air, inert gases, water, oils andmany hydrocarbon derivatives dependingupon valve seat materialOperating pressure:Refer to tablesAmbient temperature:Refer to tables opposite
Materials60 Series: Nickel plated brass to UNI-5705-65,chromium plated brass, zinc plated steel,PTFE seats and nitrile or Viton rubber seals61 Series: Stainless steel body, stem, ball nut andhandle PTFE seats62 Series: Steel body, carbon steel stem, carbon steelball PTFE seats, Viton seals, zinc plated nutsand handleNVC***2H: Brass bodies, PTFE seats and seal zinc die cast headsNVC***2F: Carbon steel body, phosphate finish, zinc diecast handle, PTFE seats and sealNVC***2B: Stainless steel (316) body, zinc die casthandle, PTFE seats and seal
Alternative modelsDifferent handel variationsAlternative seat and seal materialDistribution manifoldsConsult our Technical Service for details
PPrreecciissiioonn eennggiinneeeerreedd sshhuutt--ooffff vvaallvveess..MMiinniimmuumm rreessiissttaannccee ttoo fflluuiidd ffllooww..PPoossiittiivvee qquuiicckk ooppeenn//sshhuutt aaccttiioonn..FFllooww iinn eeiitthheerr ddiirreeccttiioonn ((eexxcceepptt eexxhhaauusstt ttyyppee))..
555
MiniReduced bore
ExhaustingFull bore
*For ‘Tee’ handled version change 4th digit to 2 ie.6022213128EX for a 1/4" full bore tee handled ball valve.
StandardFull bore
*For ‘Tee’ handled version change 4th digit to 2 ie.6022212128 for a 1/4" full bore tee handled ball valve.Only up to 1" available with tee handle.
Three wayFull bore
*Test specification differs from standard. Please consultour Technical Service for further details
Lockable exhaustingFull bore
*Test specification differs from standard. Please consultour Technical Service for further details.Note: lever lockable only in closed position. Standardhandle accepts Ø 7 mm shackle.
PTFE seats, nitrile sealsOperating temperature: -10°C to +90°C
PTFE seats, nitrile sealsOperating temperature: -10°C to +90°C
PTFE seats, Viton sealsOperating temperature: -20°C to +150°C
PTFE seats, Viton sealsOperating temperature: -20°C to +150°C
PTFE seats and sealsOperating temperature: -20°C to +100°C
PTFE seats, Viton sealsOperating temperature: -15°C to +150°C
60 Series ball valves Brass
Â" to 4" BSP
FFeemmaallee MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄8 10 601112118G1⁄4 10 601112128G3⁄8 10 601112138G1⁄2 10 601112148
FFeemmaallee MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄4 64 602113128EXG3⁄8 64 602113138EXG1⁄2 50 602113148EXG3⁄4 50 602113168EXG1 50 602113188EXG1Ê 40 6021131A8EX
FFeemmaallee MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄4 25 602114428G3⁄8 25 602114438G1⁄2 25 602114448G3⁄4 16 602114468
FFeemmaallee MMaaxxiimmuummpprreessssuurree ((bbaarr))
1⁄4 13,6 bar 6018121283⁄8 13,6 bar 6018121381⁄2 13,6 bar 6018121483⁄4 13,6 bar 6018121681 13,6 bar 601812188
FFeemmaallee MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄4 45 602112128G3⁄8 40 602112138G1⁄2 35 602112148G3⁄4 30 602112168G1 25 602112188G1Ê 20 6021121A8G1Ë 20 6021121B8G2 16 6021121C8G3 10 6021121E8
FFeemmaallee//MMaallee
MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄8 10 601112218G1⁄4 10 601112228G3⁄8 10 601112238G1⁄2 10 601112248
FFeemmaallee//MMaallee
MMaaxxiimmuummpprreessssuurree ((bbaarr))
G1⁄4 45 602112228G3⁄8 40 602112238G1⁄2 35 602112248G3⁄4 30 602112268G1 25 602112288G1Ê 20 6021122A8
Fittings
556
A B C D Ø E G H SW
MiniReduced bore
Female
ExhaustingFull bore
*Exhaust
Three wayFull bore
Lockable exhaustingFull bore
*G (across flats)** exhaust port
Female/female
StandardFull bore
60 Series ball valves BrassÂ" to 4" BSP
Female/female601112118 G1⁄8 20 37 22 5,5 19 19 601112128 G1⁄4 20 37 22 5,5 19 19 601112138 G3⁄8 21 41 24 8,0 19 21 601112148 G1⁄2 25 48 30 10,0 22 25
602112128 G1⁄4 48 36 8 23 85 12 18 602112138 G3⁄8 49 36 10 24 85 12 21 602112148 G1⁄2 60 40 15 30 85 15 25602112168 G3⁄4 69 47 20 38 105 16,3 31602112188 G1 83 51 25 46 105 19,1 38 6021121A8 G1Ê 96 63 32 58 130 21,4 476021121B8 G1Ë 106 69 40 70 130 22 546021121C8 G2 129 83 50 86 165 25,7 666021121D8 G2Ë 159 99 65 111 248 30,2 856021121E8 G3 182 110 80 135 248 33,3 1006021121F8 G4 219 129 100 167 248 39,3 125
AA CC DD ØØ EE ØØ FF GG HH SSWWFemale
AA CC DD ØØ EE ØØ FF GG SSWWFemale/male
AA CC DD ØØ EE ØØ FF GG HH HH11 JJ SSWW
1⁄4 601812128 93 45 8 44 20 3⁄8 601812138 93 45 9 44 20 1⁄2 601812148 93 50 14 58 24 3⁄4 601812168 114 57 19 64 30 1 601812188 114 61 24 81 40
AA BB CC FF GG ((aa//ff))
601112218 G1⁄8 20 37 22 5,5 19 19 601112228 G1⁄4 20 37 22 5,5 19 19 601112238 G3⁄8 21 41 24 8,0 19 21 601112248 G1⁄2 25 48 30 10,0 22 25
AA BB CC DD EE GG HH HH11 SSWWMale/female
602113128EX G1⁄4 52 61 8 29 100 22 602113138EX G3⁄8 54 61 10 29 100 22 602113148EX G1⁄2 69 64 15 36 100 27 602113168EX G3⁄4 77 76 20 45 120 33 602113188EX G1 89 80 25 54 120 40 6021131A8EX G1Ê 103 98 32 65 150 50
AA CC DD ØØ EE ØØ FF GG SSWW
999
9 99 99 911 11
602112228 G1⁄4 50 36 8 23 85 18602112238 G3⁄8 54 36 10 24 85 21602112248 G1⁄2 65 40 15 30 85 25602112268 G3⁄4 75 47 20 38 105 31602112288 G1 86 51 25 46 105 386021122A8 G1Ê 99 63 32 58 130 47
602114428 G1⁄4 52 42 10 22 98 11,5 11,5 26,0 22 602114438 G3⁄8 52 42 10 22 98 12,5 11,5 26,0 22 602114448 G1⁄2 64 45 15 27 98 16,5 15 33,5 27 602114468 G3⁄4 74 57 20 32 118 17,5 16 39,5 32 6021144A8 G1Ê 100 66 32 50 118 54,5 50
557
61 Series ball valvesStainless steel
Ê" ... 1" BSPP
Stainless steel ball valves
*To order ‘Tee’ handled version change 4th character to 2
*M a/flats 2 places**2 female parallel ports toISO 7/1 Rp
62 Series ball valvesCarbon steelÊ" ... 1" BSPP
Lever handle - 625112*
*To order ‘Tee’ handled version change 4th character to 2
Operating temperature: -30°C to +220°C *2 female parallel ports toISO228/1
Operating temperature: -20°C to +150°C
FFeemmaalleeBBSSPPPP
MMaaxxiimmuummpprreessssuurree ((bbaarr))
1⁄4 100 6151121283⁄8 100 6151121381⁄2 100 6151121483⁄4 64 6151121681 64 615112188
FFeemmaalleeBBSSPPPP
MMaaxxiimmuummpprreessssuurree ((bbaarr))
1⁄4 140 6251121283⁄8 140 6251121381⁄2 140 6251121483⁄4 140 6251121681 140 625112188
AA BB CC DD LL MM ((aa//ff))((tt..bboorree))1/4 100 45 29 8 50 213/8 100 45 29 10 50 211/2 110 53,5 34 15 60 263/4 140 64 42,5 20 70 321 140 68 50,5 25 85 40
AA BB CC DD LL MM ((aa//ff))((tt..bboorree))1/4 96 41 10 25 13 503/8 96 41 10 25 13 501/2 96 43 13 32 16 633/4 129 52 17 37 20 751 129 58 22 44 25 88
Fittings
558
Traditional 3-piece ball valvesÊ" to 1" BSP
Standard
Panel mounting
3 way panel mounted diverter
Max. pressure 27 bar Max. pressure 64 bar Max. pressure 64 barMax. temp. +230°C Max. temp. +230°C Max. temp. +230°C
Max. pressure 27 bar Max. pressure 64 bar Max. pressure 64 barMax. temp. +230°C Max. temp. +230°C Max. temp. +230°C
Max. pressure 27 bar Max. pressure 64 bar Max. pressure 64 barMax. temp. +230°C Max. temp. +230°C Max. temp. +230°C
BBrraassssMMooddeellCCaarrbboonn SStteeeell
SSttaaiinnlleessssSStteeeell
BBrraassssMMooddeellCCaarrbboonn SStteeeell
SSttaaiinnlleessssSStteeeell
1/4 NVC4PC2H/P NVC4PC2F/P NVC4PC2B/P3/8 NVC6PC2H/P NVC6PC2F/P NVC6PC2B/P1/2 NVC8PC2H/P NVC8PC2F/P NVC8PC2B/P
BBrraassssMMooddeellCCaarrbboonn SStteeeell
SSttaaiinnlleessssSStteeeell
1/4 NVC4PC2H/PL NVC4PC2F/PL NVC4PC2B/PL3/8 NVC6PC2H/PL NVC6PC2F/PL NVC6PC2B/PL1/2 NVC8PC2H/PL NVC8PC2F/PL NVC8PC2B/PL
A B C D EThrough bore
1/4 61 39 75 25 103/8 74 39 75 25 101/2 78 39 75 28 103/4 85 42 75 32 131 109 48 100 41 19
A B C D E FF GG HH JJThrough bore
1/4 61 48 75 25 10 27 24 5 273/8 74 48 75 25 10 27 24 5 271/2 78 48 75 28 10 27 24 5 27
1/4 NVC4PC2H NVC4PC2F NVC4PC2B3/8 NVC6PC2H NVC6PC2F NVC6PC2B1/2 NVC8PC2H NVC8PC2F NVC8PC2B3/4 NVC12PC2H NVC12PC2F NVC12PC2B1 NVC16PC2H NVC16PC2F –
• Real time price and availability information24 hours a day
• On-line product catalogue with detailedtechnical information
• Downloadable technical data sheets as pdffiles
• Downloadable 2D and 3D CAD files withon-line viewing and selectable file formats
• Easy access to details of Norgren contactswith specialised electronics experience
e-pneumatics is easier!Visit our webstores for easy selection of products and on-line ordering.
Fittings
www.norgren.com/info/en560560
Technical dataOperating pressure:
0 to 35 bar
Ambient temperature:
-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 0,253
CompatibilityRectus 20, Legris 20, Festo 20, Bosch size 1, Walther 06-003
MaterialsCoupler back, body & sleeve: nickel plated brassValve: brassSpring & balls: stainless steelSeals: Buna NPlug: nickel plated brass
Socket - male thread Plug - male thread
Plug - female thread
Plug - hose barb
Socket - female thread
Socket - hose barb
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
Water
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
SSmmaallll ddiiaammeetteerr ccoouupplliinnggSSiinnggllee hhaannddeedd ooppeerraattiioonnGGoooodd ffllooww rraatteess,, llooww pprreessssuurreeddrroopp
Single shut off quick release couplings223322 SSeerriieess
BSPP1/8 232210018M5 2322A005
BSPP1/8 232110018M5 2321A0005
BSPP1/8 232120018M5 2321D0005
ID Hose3 2321303004 232130400
BSPP1/8 232220018M5 2322D0005
ID Hose3 2322303004 232230400
Air inletpressure6 bar
561
Socket - male thread
Socket - female thread
Socket - hose barb
Single shut off quick release couplings223333 SSeerriieess
Socket - push on fitting
Socket - spring guard
Socket - push on panel mounted
Plug - male thread
Plug - female thread
Plug - hose barb
Plug - push on fitting
Plug - spring guard
Water
WWiiddee rraannggee ooff ccoonnnneeccttiioonnssCCoommppaacctt rroobbuusstt ccoonnssttrruuccttiioonnHHiigghh ffllooww,, llooww pprreessssuurree ddrroopp
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv=0,844
CompatibilityRectus 21, Rectus 90, Legris 21, Camozzi, Schrader miniBosch size 2
MaterialsCoupler back, body & sleeve:nickel plated brassValve: brassSpring & balls: stainless steelSeals: Buna NPlug: nickel plated brass
BSPPG1/8 233210018G1/4 233210028
BSPPG1/8 233220018G1/4 233220028
ID Hose4 2332304006 2332306009 233230900
O/D I/D tube6/4 2332604008/6 233260600
O/D I/D tube6/4 2332904008/6 233290600
O/D I/D tube6/4 2332804008/6 233280600
BSPPG1/8 233110018G1/4 233110028
BSPPG1/8 233120018G1/4 233120028
ID Hose4 2331304006 2331306009 233130900
O/D I/D tube6/4 2331604008/6 233160600
O/D I/D tube6/4 2331904008/6 233190600
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
Air inletpressure6 bar
www.norgren.com/info/en561
Fittings
www.norgren.com/info/en562562
Socket - male thread
Socket - female thread
Socket - hose barb
Plug - male thread
Plug - female thread
Plug - hose barb
Single shut off quick release couplings223388 SSeerriieess
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 1,476
CompatibilityRectus 25/26, Legris 25/26Bosch size 3 Parker PE/PEF52Cejn 320PCL AC71
MaterialsCoupler back, body & sleeve:nickel plated brassValve: brassSpring & balls: stainless steelSeals: Buna NPlug: nickel plated brass
DDuurraabbllee ccoonnssttrruuccttiioonnHHiigghh ffllooww rraatteess,, llooww pprreessssuurreeddrrooppCCaann bbee uusseedd wwiitthh sstteeeell pplluuggssffiitttteedd ttoo aaiirr ttoooollss
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
Water
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP1/4 2382100283/8 2382100381/2 238210048
BSPP1/8 2381100181/4 2381100283/8 2381100381/2 238110048
BSPP1/4 2381200283/8 2381200381/2 238120048
BSPP1/4 2382200283/8 2382200381/2 238220048
ID Hose6 2382306009 23823090013 238231300
ID Hose6 2381306009 23813090013 238131300
Air inletpressure6 bar
563
Socket - male thread
Socket - female thread
Socket - hose barb
Single shut off quick release couplings223344 SSeerriieess
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 2,764
CompatibilityRectus 25/26, Legris 25/26,Parker PEF/PF52, PCL AC71Bosch size 3, Cejn 320,
MaterialsCoupler back & body: nickelplated brassValve: zinc die-casting nickelplatedSpring & balls: stainless steelSeals: Buna NSleeve & plug: hardened nickelplated steel
Plug - male thread
Plug - female thread
Plug - hose barb
Water
LLooww pprreessssuurree ddrrooppHHiigghh ffllooww rraatteeCCoommppaacctt && rroobbuussttWWiiddee rraannggee ooff ccoonnnneeccttiioonnss
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPPR1/4 234210028R3/8 234210038R1/2 234210048
BSPPR1/8 234110018R1/4 234110028R3/8 234110038R1/2 234110048
BSPPG1/4 234120028G3/8 234120038G1/2 234120048
BSPPG1/4 234220028G3/8 234220038G1/2 234220048
ID Hose6 2342306009 23423090013 234231300
ID Hose6 2341306009 23413090013 234131300
Air inletpressure6 bar
www.norgren.com/info/en563
Fittings
www.norgren.com/info/en564564
Socket - male thread
Socket - female thread
Socket - hose barb
Plug - male thread
Plug - female thread
Plug - hose barb
Single shut off quick release couplings223355 SSeerriieess
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 5,166
CompatibilityRectus 27Legris 27Parker PEF 53Cejn 410
MaterialsCoupler back & body: nickelplated brassValve: brassSpring & balls: stainless steelSeals: Buna NSleeve & plug: hardened nickelplated steel
Water
VVeerryy hhiigghh fflloowwLLooww pprreessssuurree ddrrooppCCoommppaacctt && rroobbuusstt
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP1/4 2352100283/8 2352100381/2 235210048
BSPP1/4 2351100283/8 2351100381/2 235110048
BSPP1/4 2351200283/8 2351200381/2 235120048
BSPP1/4 2352200283/8 2352200381/2 235220048
ID Hose9 23523090013 235231300
ID Hose9 23513090013 235131300
Air inletpressure6 bar
565
Socket - male thread
Socket - female thread
Socket - hose barb
Socket - hose barb panel mount
Plug - male thread
Plug - female thread
Plug - hose barb
Plug - push on fitting
Water
Double shut-off quick release couplings223333 SSeerriieess
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 0,475
Compatibility233 Double shut off are not compatible with 233single shut off due to valve connection method
MaterialsCoupler back, body & sleeve:nickel plated brassValve: brassSpring & balls: stainless steelSeals: Buna NPlug: nickel plated brass
DDoouubbllee vvaallvvee aalllloowwss ffuullll ffllooww bbuuttpprreevveennttss lleeaakk oonn ddiissccoonnnneeccttiioonnCCoommppaacctt ddiimmeennssiioonnssSSiinnggllee hhaanndd ooppeerraattiioonn
BSPP1/4 233410028
BSPP1/4 233310028
BSPP1/4 233320028
BSPP1/4 233420028
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
ID Hose6 233430600
ID Hose6 233330600
ID Hose6 233360600
ID Hose6 233470600
Air inletpressure6 bar
www.norgren.com/info/en565
Fittings
www.norgren.com/info/en566566
Double shut-off quick release couplingsDDHH SSeerriieess
US Mil C4109 Ê'' to È''
Technical dataOperating pressure:Brass 1/8": 250 bar1/4", 3/8": 200 bar1/2": 150 bar3/4"and 1": 100 barStainless steel 1/8", 1/4", 3/8", 1.2": 250 bar3/4": 160 bar 1": 100 bar
Ambient temperature:-20°C to +100°C for Buna N seals-15°C to +200°C for Viton seals
Air flow:Please refer to graphs
CompatibilityThe plug profile is manufactured inaccordance with ISO - 7241-1 series B
MaterialsBrass with Buna N sealsBack body, sleeve and valve: brassSpring and locking ring: stainless steelLocking balls: stainless steelSeals: Buna NPlug: brassStainless steel with VitonsealsBack body, sleeve and valve: stainlesssteelSpring and locking ring: stainless steelLocking balls: stainless steelSeals: Viton Plug: stainless steel
FFllooww rraattee ll//mmiinn
FFllooww rraattee ll//mmiinn
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
Water
Water
Water
Air inletpressure6 bar
Air inletpressure6 bar
Air inletpressure6 bar
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
567
Brass double shut off socket (Buna N seal) - female threads Brass double shut off plug (Buna N seal) - female threads
Profile BSP parallel Material Max working pressure1/8 1/8 Stainless steel 250 DHS-220SVP1/4 1/4 Stainless steel 250 DHS-440SVP3/8 3/8 Stainless steel 250 DHS-660SVP1/2 1/2 Stainless steel 250 DHS-880SVP3/4 3/4 Stainless steel 160 DHS-12120SVP1 1 Stainless steel 100 DHS-16160SVP
Profile BSP parallel Material Max working pressure1/8 1/8 Brass 250 DHS-220BP1/4 1/4 Brass 250 DHS-440BP3/8 3/8 Brass 200 DHS-660BP1/2 1/2 Brass 150 DHS-880BP3/4 3/4 Brass 100 DHS-12120BP1 1 Brass 100 DHS-16160BP
Profile BSP parallel Material Max working pressure1/8 1/8 Brass 250 DHP-220BP1/4 1/4 Brass 250 DHP-440BP3/8 3/8 Brass 200 DHP-660BP1/2 1/2 Brass 150 DHP-880BP3/4 3/4 Brass 100 DHP-12120BP1 1 Brass 100 DHP-16160BP
Profile BSP parallel Material Max working pressure1/8 1/8 Stainless steel 250 DHP-220SVP1/4 1/4 Stainless steel 250 DHP-440SVP3/8 3/8 Stainless steel 250 DHP-660SVP1/2 1/2 Stainless steel 250 DHP-880SVP3/4 3/4 Stainless steel 160 DHP-12120SVP1 1 Stainless steel 100 DHP-16160SVP
Stainless steel double shut off socket (Viton seals) - female threads Stainless steel double shut off plug (Viton seals) - female threads
FFllooww rraattee ll//mmiinn
FFllooww rraattee ll//mmiinn
FFllooww rraattee ll//mmiinnPPrr
eessssuu
rree dd
rroopp
((bbaarr
))FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
Air inletpressure6 bar
Air inletpressure6 bar
Air inletpressure6 bar
Water
Water
Water
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
Fittings
www.norgren.com/info/en568568
Socket - male thread
Socket - female thread
Socket - hose barb
Plug - male thread
Plug - female thread
Plug - hose barb
Quick release couplings223377 SSeerriieessUS Mil C4109 1/4”(Dynaquip D3 compatible)
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 1,382
CompatibilityDYNAQUIP D3Rectus 23/24 Legris 23,Parker 30 1/4, Cejn 310,Aignep 220 Hansen 3000
MaterialsCoupler back & body: nickel platedbrassValve: brassSpring & balls: stainless steelSeals: Buna NSleeve & plug: hardened nickelplated steelAlso availableSeries 23D, low flow version of thiscoupling
HHiigghh ffllooww rraattee,, llooww pprreessssuurree ddrrooppIInndduussttrriiaall ssttaannddaarrdd pprrooffiillee
Water
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP1/4 2372100283/8 2372100381/2 237210048
BSPP1/4 2371100283/8 2371100381/2 237110048
BSPP1/4 2371200283/8 2371200381/2 237120048
BSPP1/4 2372200283/8 2372200381/2 237220048
ID Hose6 2372306009 23723090013 237231300
ID Hose6 2371306009 23713090013 237131300
Air inletpressure6 bar
569
Socket - male thread
Socket - female thread
Socket - hose barb
Plug - male thread
Plug - female thread
Plug - hose barb
Technical dataOperating pressure:0 to 15 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 1,689
CompatibilityDYNAQUIP D4Rectus 30Parker 30 3/8Cejn 430Hansen 4000
MaterialsCoupler back & sleeve: nickelplated brassCoupler body: nickel plated steelValve: nickel plated steelSpring & pins: stainless steelSeals: Buna NPlug: hardened & nickel platedsteel
Quick release couplings223311 SSeerriieessUS Mil C4109 3/8''(Dynaquip D4 compatible)
Water
HHeeaavvyy dduuttyyGGoooodd ffllooww rraatteessIInndduussttrriiaall ssttaannddaarrdd
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP3/8 2312200381/2 231220048
BSPP3/8 2311100381/2 231110048
BSPP3/8 2311200381/2 231120048
BSPP3/8 2312200381/2 231220048
ID Hose9 231230900
ID Hose9 23113090013 231131300
Air inletpressure6 bar
www.norgren.com/info/en569
Fittings
www.norgren.com/info/en570570
Socket- male thread
Socket - female thread
Socket - hose barb
Plug - male thread
Plug - female thread
Plug - hose barb
Quick release couplings223399 SSeerriieessUS Mil C4109 1/2''(Dynaquip D5 compatible)
Technical dataOperating pressure:0 to 35 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 3,609
CompatibilityDYNAQUIP D5US Mil C4109, Rectus 37Parker PB54Cejn 550Hansen 5000
MaterialsCoupler back, body & sleeve:nickel plated brassValve: brassSpring & pins: stainless steelSeals: Buna NPlug: hardened & nickel platedsteel
Water
HHeeaavvyy dduuttyyHHiigghh ffllooww rraatteessIInndduussttrriiaall ssttaannddaarrdd
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP1/2 2392100483/4 239210068
BSPP1/2 2391100483/4 239110068
BSPP1/2 2391200483/4 239120068
BSPP1/2 2392200483/4 239220068
ID Hose13 23923130019 239231900
ID Hose13 23913130019 239131900
Air inletpressure6 bar
571
Socket - male thread
Socket - female thread
Socket - hose barb
Self venting safety couplingEN 983 Compliant quick release couplingsUS Mil C4109 Ê"
Technical dataOperating pressure:0 to 15 bar
Ambient temperature:-20°C to +100°C
Air flow:(6 bar inlet pressure) Cv = 1, 920
CompatibilityNorgren 237 Series
MaterialsCoupler back & sleeve: nickelplated brassValve: brassSpring. pins & balls: stainlesssteelSeals: Buna NBody & plug: hardened nickelplated steel
AlternativemodelsSelf venting couplings are alsoavailable in coupling and plugserves as per our 238, 234, 237,239 series.
This single shut off couplinghas a two stage disconnection.The first stage closes the valveand allows the downstreampressure to vent whilst thecoupling is still joined,avoiding whiplash.Once the pressure is ventedthe second stagedisconnection releases theplug from the socket.This complies to therequirement of EN 983.
PPrreess
ssuurree
ddrroo
pp ((bb
aarr))
FFllooww rraattee ll//mmiinn
BSPP1/4 2376100283/8 2376100381/2 237610048
BSPP1/4 2376200283/8 2376200381/2 237620048
ID Hose6 2376306009 23763090013 237631300
Air inletpressure6 bar
www.norgren.com/info/en571
Fittings
www.norgren.com/info/en572572
Technical dataMedium:Non-lubricated compressed air,filtered
Connection:G1/4 (BG4000 and BG5000)
Operating pressure:10 bar maximum line pressure
The USA O.S.H.A. recommendationsstate that nozzle pressures should notexceed 2 bar. This ensures that theblocked end condition pressure willnot exceed the 0,4 bar that couldpenetrate human skin with possiblyfatal consequences. Blow gunsshould always be supplied through asuitable pressure regulator to ensuresafe operation
MountingHand-held incorporating fingerguard
Blow guns BBGG SSeerriieess RcÊ, GÊ
BG4000
BG5000
Accessories for BG4000
Safety booster BG0100 Extension tubes BG0106, BG0112
BG4000:BBrriigghhtt cchhrroommee ffiinniisshh..CCuusshhiioonneedd ccoorrppoorraattee vviinnyyll tthhuummbbggrriipp..EExxhhaauussttss aaiirr wwhheenn nnoozzzzllee iissbblloocckkeedd..CCoommpplliieess wwiitthh OO..SS..HH..AA..
BG5000:OOnnee ppiieeccee ddeessiiggnn iinn mmoouullddeeddhhiigghh iimmppaacctt ppllaassttiicc..EExxhhaauussttss aaiirr wwhheenn nnoozzzzllee iissbblloocckkeedd..CCoommpplliieess wwiitthh OO..SS..HH..AA..
SizeG1/4 BG4000G1⁄4 BG5000
573
MB001B 1/8 1,3 / 5,3 0,03MB002B 1/4 2,3 / 9,4 0,03MBP03B 3/8" 2,9 / 11,8 0,03MB003B 3/8 4,9 / 20,0 0,10MB004B 1/2 6,8 / 27,7 0,09MBP06B 3/4" 7,2 / 29,4 0,09 MB006B 3/4 14,8 / 60,4 0,45 MB008B 1 18,0 / 73,4 0,04 MBP10B 1Ê" 23,6 / 96,3 0,04
Quietaire heavy duty silencers MMAA aanndd MMBB SSeerriieessÂ" to 2" BSPT, BSPP or PTF
Technical dataMedium:Compressed air, filtered,lubricated and non-lubricated,inert gasesOperating pressure:-1 to 20 barAmbient temperature:-20°C to + 80°COperation:Exhaust silencerMounting:Directly in the exhaust port
MaterialsAluminium body and shell, brassmesh element
AlternativemodelsM/S & C/S range of porousplastic silencers.T40 series of Quietaire sinteredbronze silencers
MB001AMB002AMBP03AMB003AMB004AMBP06AMB006AMB008AMBP10A
*Cv measured in US/gall/min **C measured in dm3/(s.bar) *Cv measured in US/gall/min **C measured in dm3/(s.bar)
Male thread Female thread
Male thread
Female thread
* For MB***B Rc (BSPT) according to BS21 and ISO - 7/1For MB***A PTF-SAE SHORT according to ANSI-B1.20.1x
* For MA***B Rc (BSPT) according to BS21 and ISO - 7/1 For MA***A PTF-SAE SHORT according to ANSI-B1.20.1 For MA***C G (BSPP) according to BS2779 and ISO-228/x
RReedduuccee tthhee nnooiissee lleevveellss ooffppnneeuummaattiicc eeqquuiippmmeenntt..PPrreevveenntt ooppeenn lliinnee eexxhhaauussttddaannggeerrss..CCoorrrroossiioonn rreessiissttaanntt..HHiigghh ffllooww ccaappaacciittyy wwiitthh llooww bbaacckkpprreessssuurree..BBrraassss mmeesshh ssccrreeeenn aannddaalluummiinniiuumm ccoonnssttrruuccttiioonn pprroovviiddeeiimmpprroovveedd ffllooww,, lloonnggeerr lliiffee aannddcclleeaannaabbllee eelleemmeenntt..PPrreevveenntt mmeettaall cchhiippss,, aabbrraassiivveeggrriittss,, dduusstt aanndd ootthheerrccoonnttaammiinnaannttss ffrroomm eenntteerriinngg ooppeenneexxhhaauusstt ppoorrttss..
ModelPTF
Portsize
Flow FactorCv*/C** kgBSPT
MA001 1/8" 0,8 / 3,26 0,03MA002 1/4" 2,4 / 9,79 0,03 MA003 3/8" 5,7 / 23,3 0,10MA004 1/2" 6,9 / 28,1 0,09 MA006 3/4" 18,0 / 73,4 0,45 MA008 1" 20 / 81,6 0,40 MA010 1Ê" 42 / 171,4 0,62 MA012 1Ë" 39 / 159,1 0,60 MA016A 2" 59 / 241,0 0,76
ModelPTF
Portsize
Flow FactorCv*/C** kgBSPT BSPP
MA001BMA002BMA003BMA004BMA006BMA008B
MA010CMA012CMA016C
AA BB CC DD EE**21 51 9 20,6 1/8" MB00121 55 13 20,6 1/4" MB00221 55 13 20,6 3/8" MBP0332 88 13 31,7 3/8" MB00332 92 17 31,7 1/2" MB00432 92 17 31,7 3/4" MBP0651 134 20 50,8 3/4" MB00651 138 23 50,8 1" MB00851 140 26 50,8 11/4" MBP10
AA BB CC DD EE**21 42 6 20,6 1/8" MA00121 45 9 20,6 1/4" MA00232 78 9 31,7 3/8" MA00332 83 12 31,7 1/2" MA00451 118 12 50,8 3/4" MA00651 118 15 50,8 1" MA00864 144 15 63,5 1Ê" MA01064 144 15 63,5 1Ë" MA01276 168 16 76,2 2" MA016A
www.norgren.com/info/en573
Fittings
www.norgren.com/info/en574574
A B C D E F
For use in drinks dispense, food processingand general industrial compressed airapplications.Quick and simple assembly.Tamper resistant with optional snap-on cover.Suitable for rigid and flexible tubing.SK and WRC approval.
Additional ranges
Plasfit push-in tube fittings
Inch version also available upon request.
General dimensions
Inch version also available upon request.
Port form dimensions
O/D Tube Series5 ... 12 mm 113/16 ... 1/2 13
Allows compact product designFitting becomes integral part of componentSuitable for vacuum up to 98%Ease of component assemblySuitable for use with both plastic and metalcomponentsSilicone free O-rings gives positive seal
Cartridge push-in fittings (kits)
For use in areas of vibrationPre-assembled unitsNo special assembly tools or heat requiredCan be remadeThinner tube can be usedWill cope with some tube misalignment
82 Series fittings (Metric)
O/D Tube5 ... 28 mm 82
4 7,5 2,0 6,0 8,6 12,0 8,1 1000804005 10,0 2,2 6,8 9,6 12,8 9,1 1000805006 11,0 2,2 7,3 10,1 13,2 10,1 1000806008 13,0 2,2 7,3 10,1 14,2 12,1 10008080010 14,5 2,2 9,6 14,6 18,7 16,1 10008100012 18,0 2,2 12,3 17,2 22,2 18,3 100081200
MM MMAA CC EE FF GG NN SS TT PP PP++00,,1100 ++ ++ ++ ++00,,1155 ++00,,1100 ++00,,0055--00 --00,,55 --00,,1100 --00,,1100 --00 --00 --00
4 4,08 6,95 12,10 8,70 2,80 6,00 0,7 0,30 1,5 8,20 1,5 8,305 5,08 8,15 12,90 9,70 3,40 6,80 0,7 0,50 1,5 9,20 1,5 9,306 6,08 9,20 13,30 10,20 4,40 7,30 0,7 0,50 1,5 10,20 1,5 10,308 8,10 11,30 14,30 10,30 6,00 7,30 0,7 0,50 1,5 12,10 1,5 12,3010 10,10 13,95 18,80 14,70 7,60 9,60 0,7 0,50 2,0 16,05 2,0 16,3012 12,20 17,02 22,30 17,30 9,65 12,30 0,7 0,50 2,0 18,20 2,0 18,50
O/DTubeO/DTube
O/DTube
Max MaxRec min.wallthickness
Rec min.wallthickness
Depth Depth DepthLength
FFoorr ppllaassttiicc ccoommppoonneennttss FFoorr mmeettaall ccoommppoonneennttss
Series
575
M5 M/15451/8 M/S11/4 M/S23/8 M/S31/2 M/S43/4 M/S61 M/S8
1⁄8 T40B18001⁄4 T40B28003⁄8 T40B38001⁄2 T40B48003⁄4 T40B68001 T40B8800
Additional ranges
M5 T40M05001⁄8 T40C18001⁄4 T40C28003⁄8 T40C38001⁄2 T40C48003⁄4 T40C68001 T40C8800
RReedduuccee tthhee nnooiissee lleevveellss ooff ppnneeuummaattiicceeqquuiippmmeenntt..CCoommppaacctt,, eeffffiicciieenntt aanndd lliigghhttwweeiigghhtt..SSccrreeww ddiirreeccttllyy iinnttoo tthhee eexxhhaauusstt ppoorrtt..PPrreevveenntt tthhee iinnggrreessss ooff ddiirrtt..LLooww ccoosstt..
RReedduuccee tthhee nnooiissee lleevveellss ooff ppnneeuummaattiicceeqquuiippmmeennttCCoommppaacctt,, eeffffiicciieenntt aanndd lliigghhttwweeiigghhttIInnsseerrtt ddiirreeccttllyy iinnttoo PPuusshh--IInn FFiittttiinnggeexxhhaauusstt ppoorrttPPrreevveenntt tthhee iinnggrreessss ooff ddiirrttLLooww ccoosstt
C/S1C/S2C/S3C/S4C/S6C/S8
BSPT BSPP
NPT Model BSPP
4 T45P00046 T45P00068 T45P000810 T45P001012 T45P00125/32 T45Y00021/4 T45Y00045/16 T45Y00053/8 T45Y0006
O/D Tube
G1⁄8 M/1511G1⁄4 M/1512G1⁄2 M/1514G3⁄4 M/1516G1 M/1518
BSPP
Type10-32 UNF Low pressure 5VS-100 SeriesG1/8 High pressure 5VS-400 Series
TypeG1/8 In-line ports 18-833-001
In-line ports 18-833-009Rear ports 18-833-017Rear ports,panel mounted 18-833-025
Threaded silencers
Stem or PIF silencers
Reduce the noise levels of pneumaticequipment.Compact and efficient.Screw directly into the exhaust port.Prevent the ingress of dirt.
Sintered bronze silencers, T40 series
Prevent the ingress of dirt with minimal flowrestriction.Robust and compact.Screw directly into the exhaust port.
Exhaust filters
M/S & T45 Porous plastic silencers
Give visual indication of level of pressuredrop across units.Provide indication of condition of filterelements.Domed lens gives wide angle of visibility.Enable pressure drop in various parts of thesystem to be monitored.
Pressure drop indicators
Indicate the presence or absence of apneumatic signalWide angle of visibilityContrasting colour combinations for positiveidentification
Pressure indicators
www.norgren.com/info/en575
Fittings
www.norgren.com/info/en576576
Can be mounted directly on the valve body.Compact design
Pressure indicators panel mounted
Pressure and vacuum modelsFor use with a variety of fluids7 bar maximum2000 r.p.m. maximum
Fast rotating joints
Robust construction
Air reservoirs
For use with a variety of fluids7 bar maximum50 r.p.m. maximum.
Slow rotating joints
CCoommppaacctt ddeessiiggnn
Pneumatic counters
1⁄4 04 0161 001⁄4 04 0162 00
PressureVacuum
*M/617 is magnetically actuated, ideal for recording magnetic cylinder cycles
G1/4 V14B517A-Q2700
Recorded impulsesM5 999999 M/616
999999 M/617*
1/8 04 0174 001⁄4 04 0175 003⁄8 04 0176 00
BSPTTaper
BSPTTaper
Volume0,1 dm3 M/14280,16 dm3 M/14290,15 dm3 M/163/150,50 dm3 M/163/501,00 dm3 M/163/1002,00 dm3 M/164/200
SSiizzee
Additional ranges
577
0014* 286
0016* 316
01 020 07 0000 000 00 64
0100* 286
0101* 286
0102* 286
0250* 359
03 029* 02 298
03 03* 299
03 0370 02 376
03 04* 298
03 04* 376
03 06* 298
03 06* 376
03 8370 02 376
03 84* 299
03 84* 376
03 86* 299
04 01** 00 576
04 0431 02 000 380
0405 347
0523* 387
052305* 384
05231* 455
05234* 399
0542636 359
05428* 359
0543705 359
0545005 313
055* 387
0559301 371
0568384 370
0568394 371
0570110 384
0570110 392
0570275 384
0574* 392
05854* 392
0588666 286
060174* 370
0602005 371
0657859 384
0657868 286
0660689 359
0663303 384
0664* 383
068000* 286
0680683 359
0681641 365
070120* 286
07996* 359
0799915 365
0823* 400
0862* 396
0863* 394
0863216 455
0880* 386
0881* 386
0881300 455
0881400 316
1-C-655 189
10* 503
10-026-100 468
10-826* 468
10008* 574
1002/* 472
100H61200 553
100HA0*00 553
10124* 512
10201* 316
102150618 365
1022* 316
1028* 316
102GA 343
102GA 342
102GB 343
102GD 343
1094-99 464
1095-02 464
10K51 351
10TA0 351
11 D 400
11-204* 466
11-808* 466
11-809-99* 487
11-818* 474
11-908-100 466
11400* 474
1192-99 464
12* 511
1321-99 464
1500500* 542
15020* 542
15023* 541
15023*818 478
15033* 543
1504* 544
1506000* 543
1542* 541
1581-90 423
1600500* 542
1600500*8 286
16020* 541
16023* 541
1602900* 541
1604200*8 543
1606200*8 543
1609200*8 543
16A51* 544
16K511* 544
17-816-99* 488
17223* 541
18 051 * 524
18 071 * 524
18 A51 * 524
18 A71 * 524
18 D 386
18 K51 0* 524
18 S 393
18-001-005 464
18-001-027 466
18-001-029 464
18-001-092 456
18-001-959 484
18-001-962 484
18-001-973 483
18-001-974 474
18-001-978 407
18-001-979 407
18-001-980 468
18-003-026 464
18-003-999 474
18-004-9* 474
18-007-97* 421
18-011-02* 407
18-013-* 486
18-013-85* 486
18-013-905 474
18-013-908 486
18-013-909 474
18-013-913 474
18-013-989 431
18-013-990 486
18-013-991 486
18-023-610 421
18-025-003 456
18-026-9* 427
18-027-98* 421
18-833-0* 575
18-999-225 426
18-999-412 478
18-999-434 426
1800*YY 390
1801*YY 390
1802*YY 388
1804*YY 388
181**YY 388
181**YY 390
1A 488
Part number Page Part number Page Part number Page
Index
Index
578
2-C-655 189
20 B00 00*8 524
20 D 388
20 P00 00*8 524
20A0000* 509
20AG* 464
20AL-X 474
20AL-X2G/PK100 466
20B0000* 509
20C0000* 509
20D000528 509
20E0018* 509
20F002828 509
20G003838 509
20J000018 509
20K0000* 509
20L0000* 509
20M0000* 509
21020* 514
21040* 514
21060* 514
2117-01 407
21225* 514
21247* 514
21257* 514
21A51* 514
21K51* 515
2221*** 0000 00000 293
231* 269
231* 569
232* 560
233* 561
233* 565
234* 563
235* 564
237* 268
237* 568
2376* 571
238* 562
239* 570
24 * 537
249* 312
26220 378
26230 378
2787-41 482
2787-44 482
2787-96 474
2787-97 474
2787-98 474
29117* 542
29217* 543
2962-04 462
2962-89 462
3-C-655 189
300140* 542
30117* 543
302180* 542
3081-01 474
33 D 394
34 02* 553
34 05* 544
34* 526
34027800 518
3407-02 464
3407-19 470
3407-29 462
3407-71 480
36 0001 10 553
36* 518
3652-18 458
37 05* 523
3795-04 468
3820-08 480
3820-14 462
39 0014 00 549
39 0120 * 553
39004100 553
39004160 553
3A 488
4*14-52 454
4*28-*3 454
4-C-655 189
4020-51R 409
4020-51R 454
40200 379
40300 379
4048* 286
4050-89 431
4050-89/X10 456
4088* 369
409002*709301200 368
4091X**900002400 359
40947**.9000 364
4094X**900002400 358
40957**.9000 364
4095X**900002400 358
40AC 470
40AC-100 470
40AC-6/PX100 470
40AC-8/PX100 470
40D 398
4106* 551
4141-10 460
42 00* 549
42 02* 549
4209-03 444
4213-89 431
4214-51 433
4214-52 433
4215-08 433
4215-09 433
4215-11 447
4216-52 454
4224-50 433
4228-01 449
4228-02 449
4228-03 449
4241-01 436
4248-89 439
4248-89 454
4255-51 431
43 * 533
4313-50 431
4314-51 433
4314-52 433
4315-09 433
4315-10 433
4315-11 433
4315-12 433
4316-06 452
4316-51 454
4323-51 443
4324-50 433
4324-51 453
4328-51 449
4328-52 449
4328-53 449
4338-02 408
4338-05 432
4341-01 436
4344-01 410
4344-02 410
4346-52 452
4346-99 427
4348-89 417
4348-89 454
4355-50 407
4355-50*2117-01 431
4355-51 439
4368-51 439
4368-51 454
4380-200 408
4380-201 412
4380-300 408
4380-301 410
4380-500 432
4380-600 432
4380-602 434
4380-700 432
Part number Page Part number Page Part number Page
579
4380-730 434
4380-750 436
4381-*00 440
4381-200 418
4381-300 418
4382-*00 442
4382-200 420
4382-300 420
4383-*00 438
4383-200 416
4383-300 416
4384-*00 422
4417-01 455
4424-50 433
4438-03 432
4444-01 434
4455-51 431
4461-50 439
4461-50 454
48016* 549
48021* 531
48A355* 492
48B355* 492
48C355* 492
48D355* 492
4V76** 189
4V77** 189
5-C-655 189
5191-88 439
5191-88 454
5292-5* 478
5347* 296
5350-9* 412
5351-9* 410
5568-01 412
5576-99 408
5797-50 409
5797-50 454
5800-51 409
5925-02 432
5925-09 434
5939-06 458
5980* 368
5988-01 474
5988-02 483
5VS-100 575
5VS-400 575
601* 555
60211* 555
60A* 488
60B* 488
6151121* 557
61A2 472
61B2 472
61B2/B* 472
6212-50 458
6251121* 557
639-02 474
665-70 412
665-72 412
70300 322
74316-50 439
74316-50 454
7450* 427
74503-51 426
74504-50 407
74504-52 421
74616-50 426
74630-04 483
80000 318
80100 378
80200 294
81021600 286
81110800 286
82 Series 574
82400 336
84500 337
8A35508 492
903170* 284
95000 324
96000 326
97100 328
995050* 400
A440* 84
A64G* 450
A74G* 450
AA0* 296
B05* 480
B07* 462
B38* 474
B38-* 482
B64G* 416
B68G* 416
B72G* 438
B73G* 438
B74G* 438
BA0* 296
BG* 572
BL3**1-21 273
BL3000 273
BL64* 406
BL68* 406
BL72* 430
BL73* 430
BL74* 430
BM/1430 380
BP43**-13-** 275
BP43**-13-91 273
BP4300 273
BU6* 550
C/59000 197
C/800 354
C/S* 575
C0* 493
C2* 499
CH60* 552
CP/100/A/G1/1/8* 188
CP/100/AM/G1/1/8* 188
CP/125/A/G1/1/8/* 188
CP/16O/A/G1/1/8* 188
CP/200/A/G1/1/8/* 188
CP/32/* 188
CP/40/* 188
CP/50/* 188
CP/63/* 188
CP/80/* 188
CQM/22* 279
CR14* 380
CS13* 428
CS15* 428
CS60* 550
CS70* 550
DA0* 296
DHP-* 567
DHS-* 567
DM/48/M* 305
Part number Page Part number Page Part number Page
Index
580
DM/49/M* 305
DM/54 304
EA0* 296
EQM/46* 89
F07* 458
F17 458
F17-*00-M3HD 212
F18 458
F22 484
F39* 460
F47* 460
F64B* 412
F64C* 410
F64G* 408
F64H* 410
F64L* 412
F68C* 410
F68G* 408
F68G-*GN-EC2 212
F68H* 410
F72C* 434
F72G* 432
F72V* 436
F73C 446
F73C 434
F73G* 432
F73G-*GN-E*2 212
F74C* 434
F74G* 432
F74G-4GN-ED2 212
F74H* 434
F74V* 436
FFB64* 414
FFB68* 414
FFR64* 414
FFR68* 414
FFV68* 412
FL64* 406
FL68* 406
FL72* 431
FL73* 431
FL74* 431
FP 2* 273
FP 8* 320
KA/80* 180
KA/81* 180
KA/82* 180
KM/31*** 184
KM/55* 176
KM/80* 174
KQA/8***/** 180
KQM/55* 176
KQM/80**/** 174
L07* 468
L17* 468
L22* 484
L64M* 420
L68M* 420
L72C* 442
L73M* 442
L74M* 442
M/10**/* 196
M/1428 197
M/1428 576
M/1429 197
M/1429 576
M/1430 380
M/15* 575
M/1525 170
M/1540 170
M/160270/M 160
M/1603**/M/1* 138
M/16030*/M/* 134
M/160330/M 138
M/160340/M/11 140
M/160340/M/12 142
M/160350/M/11 148
M/160350/M/12 148
M/16036*/M/12 152
M/16038*/M/12 154
M/16039*/M/12 156
M/162000 168
M/163/* 197
M/163/100 576
M/163/50 576
M/164/200 197
M/164/200 576
M/1a63/15 576
M/2610**/*R1/I*/** 110
M/2610**/*R1/S*/** 110
M/2610**/*R3/**/** 111
M/2610**/*R4/**/** 111
M/2610**/*R6/**/** 111
M/2610**/M 108
M/261006/IR1/I*/** 109
M/261006/IR2/I*/** 109
M/261006/IR5/I*/** 109
M/261006/IR5/IP 108
M/261008/MR6/IP 108
M/261010/MR6/IP 108
M/261012/MR6/IP 108
M/261016/*R3/**/** 113
M/261016/*R4/**/** 113
M/261016/*R6/**/** 113
M/261016/MR6/IP 108
M/2611**/M 114
M/26111*/*R1/IP/** 116
M/26111*/*R1/SP/** 116
M/26111*/*R3/*P/** 117
M/26111*/*R4/*P/** 117
M/26111*/*R5/*P/** 117
M/26111*/*R6/*P/** 117
M/26111*/*R7/*P/** 117
M/26111*/*R8/*P/** 117
M/261110/MR6/IP/** 114
M/261112/MR6/IP/** 114
M/2612**/*R/I/** 119
M/2612**/*R/S/** 119
M/2612**/M 118
M/261200 120
M/2613**/*R*/IP/** 123
M/2613**/*R9/IP/** 124
M/2613**/M 122
M/261310/*R*/IP/** 122
M/261310/MR6/IP/** 122
M/261316/*R*/IP/** 122
M/261316/MR6/IP/** 122
M/2614**/M 126
M/261406/*R1/*/** 127
M/261406/*R3/*/** 127
M/261406/*R6/*/** 127
M/261406/MR1/I/** 126
M/2720 317
M/30** 196
M/31*** 194
M/3314 553
M/34*/EA*/* 200
M/344/EA*/*** 134
M/345/EA*/*** 158
M/346/*AU/*** 158
M/369* 200
M/369/LSU/* 108
M/370* 200
M/370/LSU/* 108
M/40 199
M/41 199
M/41*/EAU/* 108
M/418* 200
M/419* 200
M/42 199
M/42*/EAN/* 108
M/420* 200
M/421* 200
M/440**/M 80
M/46*** 86
M/46000/L 92
M/46900 98
M/48 305
M/49 305
Part number Page Part number Page Part number Page
581
M/49*** 102
M/50/***/** 198
M/50100 46
M/50100 46
M/50200 48
M/509* 380
M/54 304
M/55001/M/* 178
M/559** 197
M/58*** 204
M/5802*/* 210
M/58102 206
M/58112 204
M/58300 208
M/59*** 197
M/601**/M 104
M/602**/M 158
M/60280 162
M/610**/* 106
M/61000 107
M/612**/* 130
M/616 576
M/617 576
M/63* 381
M/72*8 380
M/800 354
M/8012/61/* 13
M/P13*** 11
M/P13607 21
M/P13834 11
M/P150*/** 21
M/P1500/111 21
M/P1501/109 41
M/P15737 384
M/P15737 425
M/P1710/** 41
M/P19063 383
M/P19063 425
M/P191* 277
M/P19117 384
M/P193*9 11
M/P1940* 11
M/P1944* 53
M/P1949* 53
M/P196* 53
M/P1993* 53
M/P241* 383
M/P2412* 425
M/P2925* 21
M/P342** 177
M/P34300 177
M/P34806 27
M/P35598/ 309
M/P4031* 53
M/P40381 21
M/P404** 187
M/P408* 383
M/P4143* 87
M/P4317* 277
M/P4331* 383
M/P700** 167
M/P70870/* 104
M/P71273/* 21
M/P7135* 53
M/P71364 21
M/P71470/* 41
M/P72014/5 210
M/P722** 181
M/P723** 175
M/P7240* 175
M/P72432 181
M/P72487 81
M/P72725/1000 86
M/P72816 87
M/P73001/5 10
M/P73200/* 65
M/P73201 65
M/P73202 64
M/P73424/* 109
M/P73425/* 109
M/P73427/* 122
M/P73427/1 126
M/P73428/* 109
M/P73429/*/* 115
M/P73430/*/* 115
M/P73431 126
M/P73431/1 122
M/P73431/3 115
M/P73431/4 109
M/P73431/5 109
M/P73454/* 109
M/S* 575
M46800/HM 96
MA0* 573
MB00* 573
MB00*B 447
MB002B 316
MBP0* 573
MBP1* 573
NVC***2B 554
NVC***2F 554
NVC***2H 554
NVC12PC2* 558
NVC16PC2* 558
NVC4P* 558
NVC6PC2* 558
NVC8PC2* 558
P1C* 456
P1H* 456
P64F* 424
P64F-NNC-PF* 451
P68F* 424
P72* 453
P72F* 446
P74* 453
P74F* 446
PA00* 547
PA01* 547
PA02* 547
PA03* 547
PA04* 551
PA05* 547
PA06* 547
PA07* 547
PA08* 547
PA33* 345
PA33* 548
Plasfit 574
PM/31*** 192
PM/31000 192
Pneufit 502
Pneufit C 492
PNEUKIT-* 502
PRA/181000,.../M 50
PRA/182***/* 68
PRA/182000/* 52
PRA/183***/* 50
PRA/282000 62
PRA/282000 62
PRA/282000/M/P 66
PS00* 547
PTC* 456
PTH* 456
PU00* 547
PU01* 547
PU02 547
PU03* 547
PU05* 547
PU07* 547
PU31* 345
PU31* 548
PV20* 549
PVA/8***/M/* 186
PVA/8000/MT 187
PVQ*/8***/** 187
Q440**AAAAAM33* 81
QA/282***/00 62
QA/8000/** 70
QA/8032/** 50
Part number Page Part number Page Part number Page
Index
582
QA/8040/** 50
QA/8050/** 53
QA/8050/00 50
QA/8063/** 53
QA/8063/00 50
QA/8080/** 53
QA/8080/00 50
QA/8100/** 53
QA/8100/00 50
QA/8125/** 53
QA/8125/00 53
QA/8160/00 53
QA/8160/4* 53
QA/8200/00 53
QA/8200/4* 53
QA/8250/00 53
QA/8320/00 53
QC/8**/00 354
QM/10** 171
QM/10**/00 196
QM/11**/00 196
QM/13*/* 199
QM/140/010/22 53
QM/2610**/* 108
QM/26111*/*/* 115
QM/26131*/00 122
QM/261406/* 127
QM/27/2/1 53
QM/31/***/22 53
QM/32/* 199
QM/33* 199
QM/33/***/22 27
QM/33/0**/2* 11
QM/34/* 199
QM/440* 82
QM/46***/*/88 182
QM/460* 87
QM/460**/*/*/33 90
QM/46020/*/88 182
QM/461**/**/33 90
QM/461**/35 87
QM/461**/36 87
QM/461**/67 87
QM/462**/*/*/35 90
QM/46225/*/35 90
QM/468**/*/88 96
QM/469**/**/64 98
QM/469**/IA/80 98
QM/48/* 272
QM/48/16J/21 284
QM/48/8*J/21 305
QM/54/A**V=/21 304
QM/55***/** 26
QM/55125/28 177
QM/5590*/00 197
QM/570**/2* 21
QM/601**/M/00 104
QM/6028*/** 162
QM/7600/23 309
QM/80**/** 11
QM/8000/38 29
QM/8000/61 16
QM/8032/** 53
QM/8040/** 53
QM/8050/2* 53
QM/8063/2* 53
QM/8080/2* 53
QM/81**/** 53
QM/82*0/** 53
QM/8320/** 53
QM/9**/00 196
QM/9*0/00 196
QM/90***/2* 41
QM/9100/00 196
QM/920**/** 41
QM/920/00 196
QM/946 21
QM/947 21
QM44000AAAAAM33* 82
QS/51*/00 348
QS/52*/00 381
QS/532/00 381
QS/8**/00 354
QSPF/* 189
R05* 480
R06* 487
R07* 464
R16-200-R30D 487
R18* 466
R22* 484
R24* 478
R27* 476
R30M* 487
R38* 474
R38* 482
R43* 487
R64G* 418
R68G* 418
R72G* 440
R72M* 440
R73G* 440
R74G* 440
R91* 487
RA/28000 56
RA/8000/ 53
RA/8000/L 68
RA/8000/M 58
RA/8032 53
RA/8032/L 68
RA/8040 53
RA/8040/L 68
RA/8050/* 53
RA/8063 53
RA/8080 53
RA/8100 53
RA/8200 53
RA/8320 53
RM/191000 32
RM/192000 36
RM/193000 32
RM/28000 10
RM/55401 26
RM/5910*/C 9
RM/8000 12
RM/9*0 196
RM/9100 196
RM/91000 40
RM/91000/N2 41
RM/920 196
RM/92000 42
RM/93000 40
RM/93000/N2 41
RT/57100/M 20
RT/57200 22
RT/57300 20
S/51* 348
S/636 381
S/83* 354
S0* 517
SE 9300 320
smartfrl 450
SPC/00800*/2 102
SPC/Q0080* 103
SXE* 272
SXE* 276
SXP * 272
SXP* 272
SXP* 277
T1000 352
T1100 353
T13-* 428
T15 350
T15-* 428
T20 347
T40 575
T40B1800 431
T40M0500 431
T45 575
T50 381
Part number Page Part number Page Part number Page
583
T50 509
T51 340
T52 340
T53 340
T55 339
T56 339
T60 344
T60 344
T64T 427
T64T-* 407
T65 381
T68C 427
T68C-* 411
T70 348
T72B-* 453
T72T-* 431
T73B-* 453
T73T-* 453
T74B-* 453
T74T-* 453
TM/40/2 199
TM/50/RAU/2S 198
TQM/31/* 199
TQM/33/* 199
V00056-C01 249
V03 308
V04 308
V05 308
V05* 472
V07* 470
V08 244
V09 234
V095516A-Q1* 229
V095516A-Q1200 247
V0956* 246
V096***A 247
V096833A-X0020 246
V096AX**-XXXXX 247
V09BAX**–XXXXX 247
V10 376
V100* 231
V10006–G** 247
V10006–G0* 247
V10007–K00 247
V10009–C00 247
V1001* 382
V10020-E0* 229
V10026-G** 245
V10028-G* 250
V10028-G** 249
V10034–K0* 244
V10037-E1* 382
V10038–G00 247
V10075-K32 239
V1012*-G01 249
V103**-K30 236
V10320-K0* 249
V10486-G01 249
V10511-K01 247
V10592-C01 254
V10617-A1* 244
V10626-A16L 284
V10633-A* 307
V10920-K01 229
V11* 219
V12 377
V14 236
V14 248
V14B517A-Q2700 576
V18D487X-B1*** 379
V19 377
V20 228
V22 230
V40 252
V41 252
V44 260
V44 270
V45 260
V60* 282
V61* 282
V62* 282
V63* 282
V64H* 422
V68H* 422
V704* 252
V705* 262
V7101* 277
V72G* 444
V74G* 444
VA1ASCT* 243
VE1* 240
VE1ASCN1-M1200 64
VE1ASCN1-M1200 227
VE1MP09B-00400 229
VE2* 238
VE2FBC9* 227
VM/46000 182
VM/46100 182
VM10* 218
VMAA-M200-25321 202
VMAA-M200-353** 203
VP10 356
VP21 358
VP22 364
VP40 368
VP50 372
VP51 374
VQM/460* 182
VSD2* 379
VSD2DAD1-A1*** 310
VSD7CA* 379
VSE4L4* 306
VSM/556* 30
VZC7L2C1-C31*A 253
VZC7LAC1-C3*3R 271
W07M-2GN-NNA 448
W72* 448
W74* 448
Weldfit 513
WT4****** 547
X3 03* 298
X3 03* 376
X3 04* 298
X3 04* 376
X3 06* 298
X3 06* 376
X3 34* 299
X3 36* 299
X3 36* 376
XSz* 312
XSz10V 314
Y64* 426
Y68* 426
Part number Page Part number Page Part number Page
Notes
584