Trims & Extrusions

Wallboardmjsfloorcoverings.com.au

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

2

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

3

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

4

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

5

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

6

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.35

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

7

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

8

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

9

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

10

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

11

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

12

PVC EXTRUSIONS – SKIRTING

White Dune Grey Latté

MidnightFlint Denim Black

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.Available Colours

CARPET TILE TRIMS

NAP-DOWN BARS

ANODISED COLOURS

BLACK / BL

Notation: Some profiles available in factory mill finishAll anodised profiles supplied with protective foil, which is removed at installation.

BRONZE / BR CHAMPAGNE / CH PEWTER / PE SILVER / SI

STAIRNOSINGS - INSERTS

Grey / GR

Yellow / YEBlack / BL

Glow / IL

All Stairnosing inserts are available in additional colours, minimum order quantities and lead times apply.

Compliance Requirements:AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

ANGLE FLOOR TRIMS

Angle Floor Trims also available in Stainless Steel 304 and 316 grades

Notation: All profiles are also available in Gloss White & Black except 15mm profile

GLOSS WHITE / W GLOSS BLACK / BK

Notation: Some profiles are also available in the following colour bank.

MATT SILVER / MS

GLOSS WHITE / W

BRIGHT SILVER / BS

MATT WHITE / MW

BRUSHED SILVER/BFS

GLOSS BLACK / BK

BRIGHT GOLD / BG

MATT BLACK / MBL

MJS STOCKISTSMULTI-PURPOSE BARS AND EDGE CAPPING

Beige

Charcoal

Wheat

Sky Blue

Steel Grey

Slate

Mocca

Sand

Brown

Storm

Black

Parchment

Jasper

STAIRNOSINGS - RESIDENTIALCompliance requirements AS4586:2013 – Slip Rating

Please refer to product data sheet for full compliance information

STAIRNOSINGS - COMMERCIALCompliance Requirements:

AS1428.1-2009 – Design & Luminance Contrast & AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

RETRO-FIT TRANSITION RAMPSCompliance requirements AS1428.1:2009 – Ramping

Please refer to product data sheet for full compliance information

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

STAIRNOSINGS – OUTDOOR

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws and plugs sold separately Profiles pre-fitted with black carborundum tread and luminance strip

Compliance requirements AS4586:2013 – Slip RatingPlease refer to product data sheet for full compliance information

ALUMINIUM SPECIALTY PROFILES

PVC SPECIALTY PROFILES

Notched at 2.5mm, 2mm and 1.5mm

Notched at 6mm, 5mm and 4mm

1.6mm

45mm

10mm

8mm

2mm

6mm

0.6mm

16.8mm

20mm

ALUMINIUM CORNER WALL TRIM

Notation: Pre-fitted with self-adhesive tape. Refer to product data sheet for more information

BRUSHED SILVER / BFSWHITE / W BRIGHT SILVER / BS BRUSHED BLACK / BFBK

For technical data, compliance & installation instructions, please visit our website www.mjsfloorcoverings.com.au

FACEBOOK.COM/MJSFLOORCOVERINGS

COVER STRIPS

Notation: Supplied drilled (D) countersunk (C) and with matching colour screws and plugs (S) as noted: (D/C/S)

Notation: Supplied drilled (D). Matching nails sold separately

Notation: Silicone sold separately

C-CHANNEL / TRANSITION STRIPS

BLACK / BL BRONZE / BR CHAMPAGNE / CH SILVER / SI

46.434

5.5

1

3.14

20

5.3

MJ42 with MJ40 MJ43 with MJ40

MJ42 with MJ405 MJ43 with MJ405

3.14

20

11.8 MJ42 with MJ41 MJ43 with MJ41

40

7.657.3

5

37

5.3

1.2

20

5.3

3.14

SEAMLESS TRANSITION RAMPS

1.9m

m

2.9mm

12m

m

110mm

5.5m

m

STR55120

1.2m

m

1.9m

m

2.9mm

10m

m

65.9mm

5.5m

m STR55100

1.2m

m

2.9mm

8mm

79.8mm

4.5m

m STR45080

1.2m

m1.9m

m2.9mm

10m

m

99.7mm

4.5m

m

STR45100

2mm

1.2m

m

2.9mm

12m

m

120mm

4.5m

m STR45120

1.2m

m1.

2mm

1.2m

m1.

2mm

1.2m

m

1.2m

m

2.5m

m2.

5mm

1.9m

m

2.8m

m

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

2.9mm

4.4m

m6m

m10

mm

5.5m

m8m

m12

mm

44.7mm

59.8mm

99.7mm

37mm

79.8mm

120mm

2.5m

m

2.5m

m2.

5mm

2mm

STR25045 STR25055

STR25080STR25060

STR25100STR25120

70mm

7mm 5.5mm 6mm

11.8mm

TIMBER MOULDINGS

Avar

Dark Walnut

Jarrah

Nyatoh

Spotted Gum

Blackbutt

Gold Coast

Mountain Grey

Raw

Smoke

Tasmanian Oak

White

18mm

18mm

QLDMansfield, Brisbane

(07) 3347 7300

NSWWetherill Park, Sydney

(02) 9616 1500

NTH QLDGarbutt, Townsville

(07) 4727 6500

ACTFyshwick, Canberra

(02) 6212 9400

TASMoonah, Hobart(03) 6242 8800

SAHindmarsh, Adelaide

(08) 8178 5300

NTWinnellie, Darwin(08) 7922 9700

WAOpening TBA

(07) 3347 7300

VICSunshine, Melbourne

(03) 9351 7400

Domestic - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNAll Colours MJ15 3.3m 33Mill MJ15M 3.3m 33

Commercial - Hammered (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ19M 3.66m 36.6

Commercial - Hammered (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ18M 3.66m 36.6

Rippled (D) COLOUR CODE LENGTH L/M - CTNBronze MJ11/BR 3.3m 33Champagne MJ11/CH 3.3m 33Pewter MJ11/PE 3.3m 33Silver MJ11/SI 3.3m 33Mill MJ11M 3.3m 33

Senior (D)COLOUR CODE LENGTH L/M - CTNBronze MJ12/BR 3.3m 33Champagne MJ12/CH 3.3m 33Pewter MJ12/PE 3.3m 33Silver MJ12/SI 3.3m 33Mill MJ12M 3.3m 33

37mm Seamless Transition Cover (Silicone Install)COLOUR CODE LENGTH L/M - CTNAll Colours MJ16 3.3m 33

Hammered (D)COLOUR CODE LENGTH L/M - CTNAll Colours MJ13 3.3m 33Mill MJ13M 3.3m 33

Commercial (D)COLOUR CODE LENGTH L/M - CTNMill MJ14M 3.66m 36.6

50mm Heavy Duty (D/C/S)COLOUR CODE LENGTH L/M - CTNBlack MJ20/BL 3.66m 36.6Silver MJ20/SI 3.66m 36.6

Multi-Base (Pinned)COLOUR CODE LENGTH L/M - CTNMill MJ21 3.3m 66

Multi-Trim (Pinless)COLOUR CODE LENGTH L/M - CTNMill MJ22 3.3m 66

Multi-Extension ChannelCOLOUR CODE LENGTH L/M - CTNMill MJ26 3.3m 66

MJS Edge CappingCOLOUR CODE LENGTH Roll - CTNAll Colours EC25 25m 1Scuff-free formulation helps reduce markings with matt finish

Commercial Edge CappingCOLOUR CODE LENGTH Roll - CTNBlack Only CE25 25m 1Scuff-free formulation helps reduce markings with matt finish

Aluminium L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALA304 4.5mm 3m 60Mill ALA306 6mm 3m 60Mill ALA308 8mm 3m 60Mill ALA309 9mm 3m 60Mill ALA310 10mm 3m 60Mill ALA311 11mm 3m 60Mill ALA312 12.5mm 3m 60Mill ALA313 13mm 3m 60Mill ALA315 15mm 3m 60Mill ALA318 18.5mm 3m 60Mill ALA320 20mm 3m 60Mill ALA322 22mm 3m 60Mill ALA325 25mm 3m 60

Brass L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNBrass PMB304 4mm 3m 60Brass PMB306 6mm 3m 60Brass PMB308 8mm 3m 60Brass PMB310 10mm 3m 60Brass PMB3125 12.5mm 3m 60Brass PMB315 15mm 3m 60Brass PMB3185 18.5mm 3m 60Brass PMB322 22mm 3m 60

Aluminium Formable L-Shape AngleCOLOUR CODE HEIGHT (A) LENGTH LM/CTNMill ALAF304 4.5mm 3m 60Mill ALAF306 6mm 3m 60Mill ALAF308 8mm 3m 60Mill ALAF310 10mm 3m 60Mill ALAF312 12.5mm 3m 60Mill ALAF315 15mm 3m 60

PVC Ramp-ItCOLOUR CODE HEIGHT X WIDTH LENGTH ROLL - CTNBlack 2RIT 2mm x 64mm 30m 4Black 3RIT 3mm x 165mm 15m 2Black 7RIT 7mm x 300mm 10m 1

5.6mm Carpet to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CVS 40m 1

9mm Cushion Tile to Vinyl TransitionCOLOUR CODE LENGTH ROLL - CTNPVC Black CTVS 10m 1

Usage: Carpet & Cushion Tile / Vinyl Transition is designed to ramp up 2mm vinyl to meet either direct stick carpet or carpet tiles making a smooth transition between both products

PVC Stairnosing with Safety Yellow StripCOLOURS AVAILABLE CODE WIDTH LENGTH L/M - CTNBlack / Safety Yellow SN30 30mm 2.5m 25Black SNB 30mm 2.5m 25Note: Safety yellow strip co-extruded within profile. Compliance requirements AS4586.2013 – SLIP RATING. Please refer to data sheet for full compliance information.

Vinyl Transition Edge PVCCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNWhite VTRANS 8mm x 16mm 3m 60

Carpet Tile EdgeCOLOUR CODE LENGTH L/M - CTNMILL MJ03M 3.66m 36.6m

5mm Carpet Tile Diminishing StripCOLOUR CODE LENGTH L/M - CTNMILL MJ59M 3.66m 36.6m

73mm Short Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ111/SI 3.66m 36.6

73mm Long Riser Stair Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ57/BL 3.66m 36.6Silver MJ57/SI 3.66m 36.6

63mm Short Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ150/SI 3.66m 36.6

63mm Long Riser Vinyl Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ52/BL 3.66m 36.6Silver MJ52/SI 3.66m 36.6

54mm Rebated Nosing Plate (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ153/SI 3.66m 36.6

Notation: Supplied drilled (D) and countersunk (C) as noted: (D/C) Screws, plugs and 50mm inserts sold separately

72mm Short Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNSilver MJ151/SI 3.66m 36.6

73mm Long Riser Carpet Tile Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ58/BL 3.66m 36.6Silver MJ58/SI 3.66m 36.6

73mm Bullnose Nosing (D/C)COLOUR CODE LENGTH L/M - CTNBlack MJ56/BL 3.66m 36.6Silver MJ56/SI 3.66m 36.6

30mm Self Adhesive Nosing - P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBlack MJ156/BL 3.3m 33Bronze MJ156/BR 3.3m 33Champagne MJ156/CH 3.3m 33Pewter MJ156/PE 3.3m 33Silver MJ156/SI 3.3m 33

3mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ06/BL 3.66m 36.6Bronze MJ06/BR 3.66m 36.6Silver MJ06/SI 3.66m 36.6

6mm Vinyl Landing Edge – Non CompliantCOLOUR CODE LENGTH L/M - CTNBlack MJ30/BL 3.66m 36.6Bronze MJ30/BR 3.66m 36.6Silver MJ30/SI 3.66m 36.6

45mm Bullnose Self Adhesive Nosing - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ157/SI 3.3m 33*Pre-fitted with black carborundum insert

Notation: Supplied drilled (D) countersunk (C) and with matching colour nails where noted (N)Screws, plugs and 50mm inserts sold separately

50mm Sawtooth Nosing (D/C) P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ51/SI 3.66m 36.6

30.8mm Hammered Nosing (D/C/N) P3 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNBronze MJ50/BR 3.3m 33Pewter MJ50/PE 3.3m 33Silver MJ50/SI 3.3m 33

PVC Insert - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLGlow 50IL 50mm 37Black 50SI/BL 50mm 37Grey 50SI/GR 50mm 37Yellow 50SI/YE 50mm 37

50mm Aluminium Tread Plate - P4 Slip ComplianceCOLOUR CODE WIDTH L/M - CTNBlack MJ152/BL 50mm 36.6Silver MJ152/SI 50mm 36.6

Anti-Slip Self-Adhesive Tape - P5 Slip ComplianceCOLOUR CODE WIDTH L/M - ROLLBlack ASAT5020/BL 50mm 20Yellow ASAT5020/YE 50mm 20

75mm All Weather Nosing (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ154 3.66m 36.6

75mm All Weather Nosing with Luminance Strip (D/C) - P5 Slip ComplianceCOLOUR CODE LENGTH L/M - CTNSilver MJ155 3.66m 36.6

5.5mm C-Channel - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ71 3.3m 33

6.5mm C-Channel - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ73 3.3m 33

6.5mm Transition Ramp - Suitable for Hybrid FlooringCOLOUR CODE LENGTH L/M - CTNAll Colours MJ74 3.3m 33

8mm C-Channel COLOUR CODE LENGTH L/M - CTNAll Colours MJ33 3.3m 33

13mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ38 3.3m 33

15mm C-ChannelCOLOUR CODE LENGTH L/M - CTNAll Colours MJ35 3.3m 33

8mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ368 3.3m 33

CODE SIZE A SIZE B SIZE CMJ71 5.5mm 13.6mm 23mmMJ73 6.7mm 13.6mm 23mmMJ33 8mm 18mm 25mmMJ38 13mm 18mm 25mmMJ35 15mm 18mm 25mm

Multi-Height Trim Base 5.5mm - 9.2mmCOLOUR CODE LENGTH L/M - CTNMill MJ40 3.3m 33

Multi-Height Trim Base 12mm - 15.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ41 3.3m 33

Multi-Height Trim Base 9mm – 12.7mmCOLOUR CODE LENGTH L/M - CTNMill MJ405 3.3m 33

5.5mm Transition Ramp - Suitable for 5mm PlanksCOLOUR CODE LENGTH L/M - CTNAll Colours MJ72 3.3m 33

5mm L-Shape Angle Cover COLOUR CODE LENGTH L/M - CTNAll Colours MJ365 3.3m 33

COLOUR CODE SIZE LENGTH L/M - CTNBrushed Silver ARL310BFS 10mm 3m 60Bright Silver ARL310BS 10mm 3m 60Brushed Black ARL310BFBK 10mm 3m 60White ARL310W 10mm 3m 60Brushed Silver ARL315BFS 15mm 3m 60Bright Silver ARL315BS 15mm 3m 60Brushed Black ARL315BFBK 15mm 3m 60White ARL315W 15mm 3m 60Brushed Silver ARL320BFS 20mm 3m 60Bright Silver ARL320BS 20mm 3m 60Brushed Black ARL320BFBK 20mm 3m 60White ARL320W 20mm 3m 60

3mm – 5mm Transition (D/C/S) – Use with ASAT2520/BL (Carborundum Insert)COLOUR CODE LENGTH L/M - CTNSilver RTR3303 3.3m 33

Anti-Slip Self-Adhesive Tape - P5 Slip CompliantCOLOUR CODE WIDTH L/M - ROLLBlack ASAT2520/BL 25mm 20

13mm - 16mm Transition (D/C/S) COLOUR CODE LENGTH L/M - CTNSilver RTR313 3m 30

CODE A B CRTR305 5mm 65mm 10mmRTR309 9mm 96mm 10mmRTR313 13mm 128mm 10mm

5mm - 8mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR305 3m 30

9mm - 12mm Transition (D/C/S)COLOUR CODE LENGTH L/M - CTNSilver RTR309 3m 30

2.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR25045 4.4mm x 45mm 3.3m 33Silver STR25055 5.5mm x 37mm 3.3m 33Silver STR25060 6mm x 60mm 3.3m 33Silver STR25080 8mm x 80mm 3.3m 33Silver STR25100 10mm x 100mm 3.3m 33Silver STR25120 12mm x 120mm 3.3m 33

2.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX25045G 4.4mm x 96mm 3.3m 33

4.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR45080 8mm x 80mm 3.3m 33Silver STR45100 10mm x 100mm 3.3m 33Silver STR45120 12mm x 120mm 3.3m 33

5.5mm Seamless Transition RampCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STR55100 10mm x 65mm 3.3m 33Silver STR55120 12mm x 110mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

5.5mm Expansion JointCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver STREX55070G 7mm x 70mm 3.3m 33

Notation: Pre-fitted with grey polyurethane joint

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Ramp Edge - HMR-MDFHEIGHT X WIDTH CODE LENGTH QTY / CTN5mm x 100mm RE5100 1.2m 108mm x 120mm RE8120 1.2m 1012mm x 168mm RE12168 1.2m 1012mm x 240mm RE12240 1.2m 10Meets AS/NZ : 1428.1.2009 Design for Access and Mobility

Tru-ScotiaCOLOUR CODE LENGTH L/M - CTNAvar TS24/AV 2.4m 48Blackbutt TS24/BB 2.4m 48Dark Walnut TS24/DW 2.4m 48Gold Coast TS24/GC 2.4m 48Jarrah TS24/JA 2.4m 48Mountain Grey TS24/MG 2.4m 48Nyatoh TS24/NY 2.4m 48Smoke TS24/SM 2.4m 48Spotted Gum TS24/SG 2.4m 48Tasmanian Oak TS24/TO 2.4m 48White TS24/WH 2.4m 48

Raw TSU24 2.4m 48

Notation: Supplied drilled (D) countersunk (C) with screws and plugs (S) as noted: (D/C/S)

MJ60 MJ61 MJ68

Diminishing StripCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ60M 2mm x 30mm 3.66m 36.6Mill MJ61M 3mm x 30mm 3.66m 36.6Mill MJ68M 5mm x 43mm 3.66m 36.6

80mm Construction CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ05M 2.8mm x 80mm 3.66m 36.6

A B

Note: Two piece A + B

3mm Expansion Joint Cover (D/C/S)COLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNSilver MJ67G 3mm x 110mm 3.66m 18.3

100mm Construction Joint CoverCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ62M 2.4mm x 100mm 3.66m 36.6

Conforms to the requirements of AS4674-2004Please refer to product data sheet for further information.

Aluminium Finishing Cove - Suitable for Coldrooms & KitchensCOLOUR CODE HEIGHT X WIDTH LENGTH L/M - CTNMill MJ63M 50mm x 50mm 3.6m 36

41mm Seamless Transition RampCOLOUR CODE LENGTH L/M - CTNAll Colours MJ43 3.3m 33

37mm Seamless Transition StripCOLOUR CODE LENGTH L/M - CTNAll Colours MJ42 3.3m 33

13

Coving FilletCOLOURS CODE WIDTH QTY/CTNBlack 20CF 20mm x 20mm 7 x 15mBlack 32CF 32mm x 32mm 5 x 15m

Tile TrimCOLOURS CODE WIDTH QTY/CTNBlack* 2TT 25mm x 2mm 8 x 15mBlack* 3TT 25mm x 3mm 8 x 15mBlack* 5TT 25mm 5mm 8 x 15mBlack* 8TT 35mm x 8mm 6 x 15m

Feather EdgeCOLOURS CODE WIDTH QTY/CTNBlack 100FEBL 100mm 3 x 15mAll Other Colours 100FE 100mm 3 x 15mBlack 150FEBL 150mm 2 x 15mAll Other Colours 150FE 150mm 2 x 15m

FlatCOLOURS CODE WIDTH QTY/CTNBlack 100FLBL 100mm 3 x 30mAll Other Colours 100FL 100mm 3 x 30mBlack 150FLBL 150mm 2 x 30mAll Other Colours 150FL 150mm 2 x 30m

Wall CappingCOLOURS CODE WIDTH QTY/CTNBlack* WCAP 25mm 8 x 15m

300mm FlatCOLOURS CODE WIDTH QTY/CTNBlack* 300SS 300mm 1 x 30m

Notation: *Asterisked products are available in standard formulation colours upon request. Minimum order quantities and lead times apply.

Dune

Denim

Latté

Midnight

White

Flint

Grey

Black

Available Colours

ARMSTRONG PVC EXTRUSIONS – SKIRTING

14

MJS REGIONAL WAREHOUSESBRISBANE (Corporate)35 Dividend St, MansfieldPO Box 2393, MansfieldP: (07) 3347 7300F: (07) 3343 9792

TOWNSVILLEU1/12 Civil Rd, GarbuttP: (07) 4727 6500F: (08) 4727 6502

ADELAIDE22 Ridley Street, HindmarshP: (08) 8178 5300F: (08) 8178 5302

TOWNSVILLEUnit 1/12 Civil Rd, GarbuttP: (07) 4727 6500F: (07) 4727 6502

MELBOURNE82 Endeavour Way, SunshineP: (03) 9351 7400F: (03) 9351 7402

SYDNEYUnit 2, 4-7 Potter Cl, Wetherill ParkP: (02) 9616 1500F: (02) 9616 1502

HOBART101 Albert Rd, MoonahP: (03) 6242 8800F: (03) 6242 8802

CANBERRAUnit 6B/3 Barrier St, FyshwickP: (02) 6212 9400F: (02) 6212 9402

DARWINUnit 4/124 Coonawarra Rd, WinnellieP: (08) 7922 9700F: (08) 7922 9702

PERTH – Opening TBA

MJS TRADE CENTRESQLDBOWEN HILLS P: (07) 3514 5700CAIRNS P: (07) 4245 8300GOLD COAST P: (07) 5586 9800MACKAY P: (07) 4864 3500SUNSHINE COAST P: (07) 5475 8100TOOWOOMBA P: (07) 4592 4700

NSWSEVEN HILLS P: (02) 8672 2100TAMWORTH P: 0407 454 500NEWCASTLE P: (02) 4965 2600WOLLONGONG P: (02) 4253 9000

15

mjsfloorcoverings.com.au