Trade mission offshore wind 2016 - NBCCTrade mission offshore wind 2016 ... offshore access systems,...

NBCC/IRO/HWE Offshore Wind Mission UK 20-23 June 2016

Trade mission offshore wind 2016

Manchester/Liverpool, United Kingdom

20-23 June 2016

Participants overview


List of participantsList of participantsList of participantsList of participants

Company Products/services

Ampelmann Operations BV

www.ampelmann.nl

Ampelmann has become the type-name for motion compensated

offshore access systems, setting the standard in offshore safety

Bayards Aluminium Constructies BV

www.bayards.nl

Offering solutions for weight limitation challenges, as well as realizing

low maintenance costs without compromising on the strength of

structures: the golden combination for the offshore industry!

Breman Machinery BV

www.breman-machinery.nl

Breman Machinery makes components for builders of machinery,

engineering bureaus and industrial end users. From simple structures

to complex mechanical components. Work-pieces of high precision,

often with extreme dimensions and weights.

Broekman Logistics Division

www.broekmanlogistics.com

Broekman logistics is a full service logistics provider for offshore

projects.

Enersea

www.enersea.nl

Engineering and consultancy services for offshore O&G and

renewables industry

Van Heck

www.vanheckgroup.com

Van Heck is an internationally operating company in the field of water

control and management. The Van Heck organisation is very often

called in to manage disasters and redirections, and to implement

emergency solutions.

Hollandia Offshore

www.hollandiaoffshore.nl/en/offshore/

We build vast and complex offshore installations, at the same time we

can relieve our clients by taking responsibility for the total process.

Huisman Equipment

www.huismanequipment.com

Development and construction of offshore drilling, pipe lay and lifting

equipment

IHC IQIP

www.iqip.com

Innovative equipment and solutions, for O&G, offshore wind,

renewables sector, costal & civil, decommissioning.

IV-Oil & Gas BV

www.iv-oil-gas.nl

Multidisciplinary engineering and procurement company with

extensive experience in the Oil & Gas and Wind Energy industry

worldwide. In close cooperation with well-known power generation

companies and fabrication yards we perform fast track projects, as a

result of our flexible project execution approach.

KCI the engineers BV

www.kci.nl

KCI is a multidisciplinary engineering firm providing full design, engineering and consultancy services to the Offshore Wind industry. KCI designs and experts knowledge have been used in over 15 offshore wind farms in northwestern Europe.


Port of Den Helder

www.portofdenhelder.eu

The Offshore Service and Logistics Centre of the Southern North Sea

Den Helder Airport and Port of Den Helder jointly facilitate the largest

logistic offshore hub of the Netherlands. Together they offer a wealth

of space and opportunities for energy offshore-related businesses.

Thanks to our geographic location and a full-scale supply chain, we

can offer optimized logistic services to European Wind Farms.


Company profilesCompany profilesCompany profilesCompany profiles

AMPELMANN OPERATIONS BV

Contact: Ms Fleur Smalt

Job title: Business Development Manager Offshore Wind

Address: Kluyverweg 1

2629 HS Delft

The Netherlands

Telephone: +31 (0) 20 24 00 121

Mobile: +31 (0) 6 25 63 35 35

E-mail: [email protected]

Website: www.ampelmann.nl

“Offshore access as easy as crossing the street”

Ampelmann is a Dutch company and was founded in 2008 as a spin-off of the Delft University of

Technology. The core technology is an active 6DoF motion compensating gangway, which will

increase your operability by enabling safe, efficient and reliable transfers of personnel and cargo

from moving vessels to offshore oil & gas platforms, offshore wind turbines, FPSO’s and all other

fixed and floating structures at sea.

Everyday Ampelmann is active all over the world, ensuring our customers’ people can walk to work

safely. With a track record of more than 2.5 million safe transfers and 200 projects worldwide, we

have an established presence in every major oil, gas and offshore wind market. Our team spirit,

coupled with an ambitious development plan and strong focus on innovation, will help us with

setting new standards and serving our clients with the safest and most cost effective offshore access

solutions for both people and cargo.

Ampelmann continues to build its fleet of standard systems adding innovations in application: ship-

to-ship functionality, hose support, re-fueling operations, and continuous transfers. All adding up to

meet our vision: Offshore access as easy as crossing the street.

Ampelmann is the world leading offshore access solution provider:

� The sole offshore access provider with active 6 DoF motion compensated gangways which

allow for fully stabilized people and cargo transfers while compensating wave-induced vessel

motions up to 4.5mHs,

� People and cargo transfer solutions from 100kg up to 8000kg,

� Plug and play principle allows for fast mobilisation and demobilisation of system,

� Full service provider, including trained and experienced operators,

� 24/7 support of Operations Control Centre,

� Innovations and Engineering department for customized access solutions.


Track record UK offshore wind

Offshore Wind Farm Project Activities

Dogger Bank Maintenance - corrective

Dogger bank East Met Mast Inspection

Doggerbank Maintenance - preventive

Greater Gabbard Maintenance - preventive

Greater Gabbard Commissioning / Installation

Greater Gabbard Commissioning / Installation

Gwynt y Mor Windfarm (GyM) Commissioning / Installation

HornSea Repair

HornSea Commissioning / Installation

Sheringham Shoal Maintenance - preventive

Walney 2 Commissioning / Installation

Walney Offshore Windfarm Maintenance - preventive

Westermost Rough Commissioning / Installation

Certifications

The Ampelmann system is certified in accordance with Lloyd’s Register Code for Lifting Appliances in

a Marine Environment (CLAME). The system’s structure and controls & electrics are fabricated,

designed and tested accordingly. Assessments have been made in order to ensure safe operation of

the Ampelmann system. An analysis of the failure modes of all the components (FMECA) has been

made and is examined by Lloyd’s Register. Furthermore the certified under the following

management systems: ISO: 9001, ISO: 14001, OHSAS: 18001


BAYARDS ALUMINIUM CONSTRUCTIES BV

Contact: Mr Gerben Roks

Job title: Area Manager

Address: PO Box 9

2957 ZG Nieuw-Lekkerland

The Netherlands

Telephone: +31 (0) 184 68 30 00

Mobile: +31 (0) 6 53 64 96 12


Website: www.bayards.nl

Bayards Aluminium Construction is one of the world’s leading companies in engineering, design,

manufacturing and installation of complex Aluminium structures for the offshore, shipbuilding and

defence industry. Bayards is based near Rotterdam with direct access to the North Sea. The solutions

we deliver are always customized to the needs of our customers, and engineered and built to the

highest safety and quality standards and the latest international regulations, such as NORSOK, DNV,

ABS and LRS. Bayards has accreditation according to OHSAS 18001, ISO 14001 and ISO 9001 and EN

1090 and is CE CAT 4 qualified. This, combined with the natural advantages of Aluminium as the

material of choice, makes Bayards the right partner for delivering the most advanced and sustainable

solutions.

As weight issues become increasingly apparent within the offshore construction industry, Aluminium

is gaining attention, due to the significant reduction in weight: up to 60% less than steel. Moreover

Aluminium alloys used in the offshore industry corrode 100 times slower than steel, thus requiring

little to no maintenance, resulting in a durable structure with a very low cost of ownership.

Our focus for the Offshore Wind Industry can be characterized as a full service contractor on a

turnkey contract basis. As an Aluminium specialist, it is our goal to develop light safe and cost

effective structures and products, such as:

• Helidecks complete with support structure, access system, winterization, firefighting equipment

and lighting

• Stair towers and handrail systems

• Living quarters

• Link bridges, walkways and service platforms

• Helicopter Hangars

• Telescopic gangways

• Antenna and met masts

• Swing load protection barriers.

We offer complete solutions for all our products including design, engineering, procurement,

manufacturing, worldwide delivery, on-site installation, commissioning and testing, training and life

cycle support.


Our references include:

• Helidecks for Offshore Substations (OSS) for amongst others the Greater Gabbard, Galloper,

Horns Rev and Veja Mate Offshore Wind Farms.

• Helidecks for Wind Turbine Installation Vessels (WTIV) like Seajacks Hydra, GMS Endeavour,

DEME Innovation and Swire Pacific Offshore’s Pacific Orca.

• Living quarters, antenna towers, stair towers, hand railing, barriers, helidecks and helicopter

hangars for offshore platforms such as BP Clair Ridge, Statoil Aasta Hansteen and BP Valhall.

Greater Gabbard Offshore Substation Dolwin Alpha Offshore Substation & WTIV

GMS Endeavour

BP Valhall Horns Rev C offshore substation


BREMAN MACHINERY

Contact: Mr Henk Breman

Job title: CEO

Address: Sasdijk 20

8281 BM Genemuiden

The Netherlands

Telephone: +31 (0) 38 38 55 373

Mobile: +31 (0) 6 20 49 13 07


Website: www.breman-machinery.nl

Extreme Precision

Breman Machinery B.V. has the experience to make your wishes become reality. Our team of 130

well-experienced employees have the knowledge to create workpieces of extreme sizes with

maximum precision. We have a good record of projects for Oil and Gas companies, Mechanical

Engineers, Aerospace companies and Industrial firms. They see us a partner in the construction of

machines and the implementation of projects. We do not turn down any challenge.

Capacity

The welders of high-quality steel, like S460-S690, Duplex etc, are qualified by Lloyd’s Register or DNV

for all welding positions. With 30 milling, boring and turning machines we have the possibility to

offer unique services. Our largest boring machine has a range of X=20.500, Y=7.000 and Z=1.500 and

the largest turning machine can handle a length of 16.000 mm. Our preservation department can

protect your projects with different painting systems. The workshops in Genemuiden have a surface

of 21.000 meters with a height of 25 meters. The crane capacity is up to 250T. Our location is beside

open water, which means we have a direct connection to the international ports.

Quality

High quality is one of our most important standards.

We work according ISO9001, ISO3834-2, EN1090-1 and VCA**.


BROEKMAN LOGISTICS

Contact: Mr Remco Bol

Job title: Sales representative

Address: Mannheimweg 3

3197 LR Rotterdam-Botlek

The Netherlands

Telephone: +31 (0) 10 49 49 555

Mobile: +31 (0) 6 12 16 08 08


Website: www.broekmanlogistics.com

Broekman Logistics

Broekman Logistics was established over 55 years ago at the Port of Rotterdam, and has since grown

to become a full-service logistics services company employing about 800 people and with offices in

the Netherlands, Belgium, the Czech Republic, Poland, India, China and Singapore. Broekman

Logistics specialises in forwarding and shipping, warehousing and distribution and breakbulk

terminals.

The terminals

Broekman Logistics offers perfect locations for offshore projects with own terminals, extensive

storage space and all required facilities. In the Port of Rotterdam and Eemshaven we have three

terminals:

• The Distriport terminal Rotterdam: Steel, Breakbulk, Project cargo

• The Heavy lift terminal Rotterdam: Breakbulk, Offshore, Project cargo

• The Orange Blue terminal Eemshaven: Breakbulk, Offshore, Project cargo

Our terminals are ISO 9001 & 14001, ISPS and AEO certified / audited and are perfectly connected to

the rest of Europe through direct deep-sea, rail, road and Inland connections. The high-tech facilities

at our three terminals provide a solid foundation for a good partnership regarding all sorts of

offshore related projects.

Services

All three terminals are able to provide the facilities and in-house experience needed for offshore

projects. Our centrally located terminals in the Port of Rotterdam can be reached within 1,5 hour

from open sea. The Eemshaven terminal in based in the north of Holland and direct to the open sea.

Our specialties are:

• Heavy lift & Offshore cargo

• Project cargo/ Windmill handling

• Container handling

• Steel Logistics

• VAL/VAS activities

• Warehousing

• Shipping agency

• International freight forwarding (Road/Rail/Air/Ocean)


Our references

Over the years Broekman Logistics has built several long-term partnerships with leading playing in

the offshore market like Allseas, Heerema, Jumbo, Dockwise, ABB and General Electric.

Offshore windprojects at the Eemshaven terminal

• Veja Mate – Since May 2016

• Gemini, Van Oord – since June 2015

• GodeWind II & I, GeoSea – since May 2015

• Borkum Riffgrund I, GeoSea – Dec. 2013 to 2014

• East Anglia, Wood Group Kenny – April to Sept. 2013

• Global Tech One, Hochtief Solutions – July to Oct. 2013

• Borkum West II, AREVA Wind GmbH – Aug. 2012 to Dec. 2013

Distriport Terminal Rotterdam:

Heavy Lift & Offshore terminal Rotterdam:

Orange Blue terminal Eemshaven NL:


ENERSEA

Contact: Mr Pascal Ferier

Job title: Managing Director

Address: Jan Evertsenweg 12

3115 JA Schiedam

The Netherlands

Telephone: +31 (0) 10 31 32 100

Mobile: +31 (0) 6 46 99 67 32


Website: www.enersea.nl

Introduction:

Enersea is a true offshore engineering specialist, offering structural design services, production

systems design and (management) consultancy.

“We believe the future of energy is at sea.”

We explore new options and alternatives to capitalize on the incredible vast amount of energy the

ocean generates in wind and hydrokinetic tidal energy and smaller offshore oil & gas fields.

Philosophy:

Security of energy and the transition into a more sustainable society creates a strong market for

engineering but also requires engineers to start drilling on a well of new ideas. Engineers will have to

dig deeper, where others don’t. See new solutions where others won’t. Utilizing and combining every

source of energy the sea offers. From oil & gas to renewables like wind, hydrokinetic tidal and solar

energy. It requires translating alternative ideas into feasible designs with today’s technology.

These new energy projects ask for very efficient and effective engineering and management. Especially

in the early critical phases of a project, when every decision has a strong impact on its value and

success. There is a strong urge for a single focal point, an overview of the entire supply chain. This

integrated service approach to engineering (project management) provides flexibility and ensures high

levels of quality and innovation power.

Value proposition:

- Specialist knowledge : offshore engineering

- Early phase innovation : lowering LCOE

- Multi-discipline interfacing : all offshore disciplines

- Owners understanding : business objectives


Team:

Our team of consultants and engineers is decisive and has been successfully working together for

nearly 20 years combining almost 200 years of relevant engineering experience.

Clients:

- Developers

- Utilities

- Fabricators

- Installation contractors

Main services:

- Engineering Management

- (Owners) Engineering

- Concept design

- Basic design


VAN HECK

Contact: Mr Ing. Jeroen van Heck


Address: Ambachtsstraat 2

8391 VK Noordwolde

The Netherlands

Telephone: +31 (0) 561 43 17 39


Website: www.vanheckgroup.com

Van Heck is an internationally operating company with 50 years of experience in the field of water

control and management, with offices in the Netherlands and Singapore. Van Heck’s specialty is

often called upon to manage floods. Van Heck’s expertise includes providing tailor-made solutions

for dredging, civil and industrial projects and for government and water boards. Van Heck is also

active in the offshore and maritime industries. Spearheads in these industries are:

Equipment for ballast operations

Van Heck’s ballast equipment is specifically designed for load-outs and float-overs, and ideally suited

for salvage operations. The completely autonomous ballast and deballast system can be entirely

controlled from a central point and has a total capacity of over 40,000 tons per hour.

Van Heck’s capabilities in this field:

• Load-out: Supply a complete ballast system, including (ballast) engineering and operation, to

load a construction from the shore onto a barge.

• Float-over/mating: Supply a complete ballast system, including engineering and operation, to

install a platform on the offshore location.

• Jet trenching: Supply pumps to jet in cables on the ocean floor.

For less complicated operations a mini ballast and/or manually controlled system can be supplied.

Sea Trophy

Van Heck has recently welcomed a new passenger on-board: The Sea Trophy; Green and Easy Oil

Recovery. The first complete mobile pump system that enables the controlled, contained, fast (fuel-)

oil recovery after incorrect or off-spec fueling and in the event of grounding or calamity at sea.

Floodings Somerset, UK 2014

‘This was the largest mobile pumping operation of all time.’ Jeroen van Heck utters these words

with the modesty we have all come to expect from him. He makes it sound more like a dry fact

than an enormous achievement. But he is proud of his company that in the howling winds, rain,

hail and snow, helped to relieve the floods in Somerset.

Somerset, early in February 2014: Jeroen van Heck is in the region already hit by floods for weeks

resulting from continuing bad weather. He is speaking with the Environment Agency about what kind

of solution Van Heck could offer. It’s still a budget question. Then Prime Minister David Cameron

announces the availability of disaster funding. Van Heck receives the assignment almost immediately,

and the first pumps are on their way to England within a few hours: a convoy of 30 lorries loaded

with the equipment needed for the job ahead.


Jeroen: ‘They arrived early in the morning on the wrong side of the floods, but this problem was

solved by driving the Land Rover ahead of them to guide them over a narrow road that was partially

submerged. Our equipment actually arrived on site from the Netherlands before the local crane! But

as soon as we got there, the next storm hit and made it unsafe to use the crane. That’s why it took a

couple of days for us to really get everything rolling. It then took two days before the water level

started to drop, but we had to keep pumping for weeks to get rid of everything.’

Highly gratifying work

We set to work with the regional contractor who would supply the personnel and Van Heck would

provide the pumps. This meant having a total of four men from Van Heck at various locations in

Somerset in addition to dozens of locals. These workers had to ensure a good foundation for the

pumps, the laying of the pipes and pits for the suction pipes. Jeroen: ‘Local ladies kept bringing us

pies for lunch – we were well looked after. One of our staff even received a cake on his birthday with

“Happy Birthday, Daan” written on it in Dutch. It’s experiences like this that make our work so

gratifying.’

The situation

Somerset gets its name from its earliest inhabitants: people settled there during the summer but had

to leave for the winter when it became too wet. During the 17th century, the Dutchman Cornelis

Vermuyden drained the area to make it a polder. Retention polders designed to contain floods were

a part of the system. Later, a bypass was built next to the River Parret to allow for the faster drainage

of floodwater. But this time, rainfall was so extreme (and according to the local population the cause

was a lack of maintenance dredging) that this bypass’s underpasses were too small, and the drain at

the end of the bypass could not handle the incoming quantity of water. Some villages were already

under water and even the town of Bridgewater was threatened. Van Heck installed pumps so that

water that was not getting through the bypass fast enough could be pumped around them and past

the drain complex into the river near the sea.

Some impressive figures:

• number of pumps: 20

• pipes: 1100 meters

• capacity: 133,800 m3/hour

• fuel consumption: 2,300 l/hour

• transport: 30 lorries

Source: NewsSplash Van Heck, 2014


Cable burying IJsselmeer, The Netherlands, 2015

Van Heck has been successful in supplying their client with a tailor made solution for their offshore

cable burying activities for the purpose of placing windmills between Lemmer and Urk, in the

Netherlands.

Using two silenced, diesel driven, self-priming DPPG120-SC200 pumps, Van Heck provided the

flexibility necessary for the varying flows and pressures needed for the burying tool. The piping

arrangement allows for easy switching between single or ‘in series’ operation. Both pump units are

remotely controlled and the flow and pressure are monitored closely from one central point.

Added challenge

The engineers at Van Heck enjoyed the added challenge of fitting the pump system into the limited

deck space available. Using 3D simulation we were able model the pumps and piping on board,

avoiding any surprises during installation.

Source: www.vanheckgroup.com


HOLLANDIA OFFSHORE

Contact: Mr Wilfred van Bergen

Job title: Tender Manager Offshore

Address: Schaardijk 23

2921 LG Krimpen aan den IJssel

The Netherlands

Telephone: +31 (0) 180 54 05 40

Fax: +31 (0) 180 51 99 56

Mobile: +31 (0) 6 14 32 07 27


Website: www.hollandiaoffshore.nl/en

What we offer

Hollandia offshore is an EPIC supplier of offshore substations up to 5000 ton. Our state of the art

workshops enable us to fabricate topsides up to 40 meters wide and more than 70 meter long in a

conditioned environment. With a company history of more than 85 years and with an extensive track

record including iconic design and construct projects like the London eye and the Wembley stadium,

Hollandia Offshore has the experience and competences to supply our clients with the best and most

durable structures.

Facilities

Our yard comprises of the following facilities:

� Prefabrication work shop: 80x38x17 meter

� Assembly workshop: 100x40x30 meter

� Shot blasting and painting shop: 44x20x15 meter

� 50 meter load out quay

� Mooring facilities for barges up to 200 meter

� Direct access to open water

Certification

Hollandia Offshore management system is fully certified according ISO9001, ISO14001,

OHSAS18001 and ISO3834-2. Further we are FPAL verified and Achilles and Sellihca registered.

Track record

Hollandia Offshore has delivered the offshore wind top side and foundation of RiffGat OWF in 2012

and Vattenfall’s DanTysk offshore wind substation and jacket in 2013, both under an EPIC contract.

We delivered for Energinet.dk the jacket for the Horns Rev C project, including installation at sea in

2016.


HUISMAN EQUIPMENT

Contact: Mr Timon Ligterink

Job title: Sales Engineer Cranes

Address: Admiraal Trompstraat 2

3115 HH Schiedam

The Netherlands

Telephone: +31 (0) 88 07 02 222

Mobile: +31 (0) 6 55 27 00 83


Website: www.huismanequipment.com

What we offer

Huisman Equipment is a solution provider in the offshore oil and gas and renewables industries.

Huisman develops customized equipment to install, maintain, and disassemble offshore structures in

challenging environments. Based on three decades of experience in the offshore oil and gas, Huisman

offers lifting solutions as well as innovative handling tools and piling hammers for offshore

construction of wind turbine generators.

Added value

Huisman envisions building the most innovative solutions by developing equipment together with or

clients. Huisman has a long standing relationship with its clients as it helps them offset their

competitive edge and reduce the cost of energy for the project as a whole. Unique advantages of

Huisman cranes include an unmatched lightweight design, compact tailswing, and superior lifting

capacities.

Certification

Huisman Equipment is fully certified according ISO 9001, ISO 3824-2, OHSAS 18001, API Q1, etc. All

cranes built by Huisman are certified or classified according international (offshore) standards for

designing and manufacturing lifting appliances, such as Lloyd’s Register, DNV, ABS, EN, etc.


Track record

Ever since the first offshore wind turbine farm in European waters, Huisman has been involved as

developer of lifting solutions for multiple pioneering installation contactors such as:

• Seajacks

• Gulf Marine Services (GMS)

• MPI

• DEME/Geosea

Most recently, Huisman delivered the world’s largest dedicated wind turbine installation crane for

Seajacks, on its state of the art Seajacks Scylla JU vessel.


IHC IQIP

Contact: Mr Joachim Kattenberg

Job title: Account Manager Offshore Wind

Address: Smitweg 6

2961 AW Kinderdijk

The Netherlands

Telephone: +31 (0) 88 01 55 000

Mobile: +31 (0) 6 51 30 27 42


Website: www.iqip.com

IHC IQIP

IHC IQIP is formed out of the business units: IHC Hydrohammer, IHC Handling Systems, IHC Sea Steel

and IHC Fundex Equipment. Our principle activities incorporate foundation, installation and removal

for the offshore wind, oil and gas, decommissioning and coastal and civil markets.

We provide a complete range of equipment, advice and other value-added services from a single

source to meet the growing demand for integrated and reliable solutions. Thanks to the close

cooperation we maintain with our customers at every stage, we have developed breakthrough

innovations, delivered award-winning projects and generated a strong economic performance.

Saving On Safety?

Improving safety and increasing efficiency are main topics within the offshore market. However,

these objectives tend to be a trade-off or compromise. That is, improving safety inevitably incurs

additional costs. When developing the Flange Clamp Tool (FCT), we insisted on enhancing safety

while reducing OPEX.

The FCT ensures a pre-tension between the flange pile and transition piece, to create a safe

environment prior to, and during bolt installation. It can also be operated remotely resulting in a

secure workplace before people are permitted to approach the area surrounding the flanges. This

pre-tension can be up to 600kN for each tool.

In addition to this significant safety feature, multiple FCTs can be (dis)engaged in a matter of

seconds. This allows contractors to reuse the crane, or even the installation vessel, almost

immediately for adjacent installations.

Efficient and Sure installation of monopiles

The monopile installation method including NMS, guiding tool and several other tools and services

ensures low risk, efficient, accurate and safe installation of monopiles with diameters of up to 8.2

metres (bottom diameter) applied for offshore wind. It reduces operational time, increases accuracy

and provides excellent underwater noise mitigation during positioning and installation of monopiles,

while creating a safer working environment. The system includes features for inclination and rotation

of the monopile, and safeguards against the impact from waves and currents.


An impressive 350 monopiles have already been installed with this method and it’s the only proven

technology for noise mitigation during pile driving that complies with current international noise

mitigation legislation, including the strictest German regulations in place for all German offshore wind

projects.


IV-OIL & GAS

Contact: Mr Peter Breit

Job title: Manager Business Development

Address: Noordhoek 37

3351 LD Papendrecht

The Netherlands

Telephone: +31 (0) 88 94 32 830

Fax: +31 (0) 88 94 33 301

Mobile: +31 (0) 6 11 71 64 80


Website: www. iv-oil-gas.nl

Iv-Oil & Gas

Iv-Oil & Gas is a division of the multi-disciplinary engineering company Iv-Groep.

The service range of Iv-Oil & Gas encompasses projects in the Oil & Gas industry, at both onshore and

offshore (fixed or floating) locations as well as in the Wind Energy Industry. The capabilities of Iv-Oil

& Gas range from feasibility studies to turnkey contracts, including Project Management, Design and

Engineering, Procurement, Construction and Commissioning activities for all leading operators within

the Oil & Gas and Wind Energy industry.

Renewable Energy - Specialised Experience

Our specialised experience in Oil & Gas platforms, in particular the knowledge of Offshore Steel

Structures, Utility and Control Systems, gives us an excellent and unique basis for the engineering

and design off Offshore Transformation Substation.

Iv-Oil & Gas is a reliable partner for the Engineering and Design for your Offshore Transformer

platforms. Although we work according our strict Quality Assurance system is ISO 9001:2008

certified, we remain flexible in our project execution, allowing us to successfully execute projects

within a very short time frame. Our Clients know they can rely upon us whenever they have a project

need.

Wind Energy Experience – Substation Designs

� Siemens Helwin 2 – HVDC

� ABB Thornton Bank – 150 kVA AC

� ABB Dolwin Alpha – HVDC

� ABB Borwin Alpha – HVDC

� Siemens – Greater Gabbard Wind Farm – 150 kV AC

� EnergyNet DK / Vattenhall, DONG – Horns Rev 1 – 150 kV AC

� EnergyNet KD/ DONG Horns Rev 2 – 150 kV AX


Highlighted Wind Energy Projects

Helwin Bèta is an Offshore High Voltage Direct Current Convertor Platform. This means the

Alternating Current coming in from the wind farms, is converted to Direct Current in the Convertor

Platform. This Direct Current is transported via subsea cables and land cables to a Convertor station

onshore, which will transform the Direct Current back to Alternating Current. This transforming

process minimises the energy losses during transport of the energy from the offshore wind farms to

the shore.

Our References


KCI THE ENGINEERS

Contact: Mr Jan Willem van Bloois

Job title: Director Sales & Marketing

Contact: Mr Dirk Pulles

Job title: Manager Renewables

Address: De Brauwweg 60

3125 AE Schiedam

The Netherlands

Telephone: +31 (0)10 42 70 399

Mobile Mr van Bloois: +31 (0) 6 51 91 02 95


Mobile Mr Pulles: +31 (0) 6 13 82 25 33


KCI is a multidisciplinary engineering firm providing full design, engineering and consultancy services

to the Offshore Wind industry

We design and engineer:

• Topsides and foundations for Offshore Substations

• Monopiles and jackets for WTG

• Met masts

• Deck lay outs and cable lay solutions

• Innovative concepts and smart tools

KCI supports its clients during the complete life cycle of an offshore windfarm. Our company has

been involved in the design & engineering of over 15 offshore wind farms in northwestern Europe.

Our Specialties

In house design from feasibility study to detailed design of substations, substructures and

foundations • own concepts for 3-and 4-legged jackets & monopiles • innovative Double Slip Joint as

replacement for grouted connections • own design for floating & self-installing substations • smart

logistics tool TILT • sea bed analyses to determine most efficient subsea cable routes • integrated

safety analysis • onsite fabrication supervision • offshore monitoring during installation phase

Our USPs

Creative thinking is our strength. We develop innovative concepts for our clients and turn today’s

ideas into tomorrow’s winning designs. This unique ability originates from in depth expertise within

the complete life cycle and from having the best engineers on board.

We take care of concept, basic and detailed engineering and continuously nourish our organization

with feedback from every stage of the project. In this way we are constantly improving our high level

engineering knowledge and smart tools. Our goal is to implement cost effective solutions for our

clients and to optimize operational capability.


Our Offshore Wind customers

HSM, Energinet.dk, EnBW, Eneco, Siemens, Van Oord, WindMW, Iberdrola, Iemants, Boskalis,

Oceanteam, Tideway, GeoSea, Hollandia Offshore, Strukton, Bayards, SeaWay Heavy Lifting

Certificates/Accreditations

KCI is ISO 9001:2008 certified and FPAL registered. Our engineers that assist our customers during

fabrication and installation, all have followed specific training for working onsite and offshore.

KCI’s Offshore Wind highlights

Design review & basic design topside HornsRev C

Double Slip Joint (DSJ), own innovative concept to replace grouted connection between monopile and transition piece

Concept & FEED (2nd BSH) for 6MW WTG for Hohe See

Detailed design of the substructure & topside of the Riffgat OSS

Monopile concept for the Borssele Project

Concept & Based design of Gravity Based Foundations


Basic & Detailed Design for OSS jacket Baltic Sea

Concept, Basic & Detailed design of innovate pile gripper

Deck lay out design, mobilisation, conversion for customers such as Oceanteam, Boskalis, Tideway, GeoSea and Van Oord

Rotor Installation Engineering for BARD Wind farm

Calculations for FEED & Detailed design for 2 OSS foundations for Gemini project

Detailed design of the substructure & topside of the DanTysk OSS


PORT OF DEN HELDER

Contact: Katja Naber van der Aa

Job title: Account manager

Contact: Nick Waterdrinker

Job title: Project Manager Offshore Energy

Address: Nieuwe Diep 33-3

1781 AD Den Helder

The Netherlands

Telephone: +31 (0) 223 61 84 81

Mobile: +31 (0) 6 30 08 99 48


Website: www.portofdenhelder.eu

The Offshore Service and Logistics Centre of the Southern North Sea

Den Helder Airport and Port of Den Helder jointly facilitate the largest logistic offshore hub of the

Netherlands. Den Helder is ideally situated in the middle of the wind farms off the West European

coasts and established offshore locations such as Aberdeen, Norwich and Esbjerg.

Over the years, thanks to an almost unbeatable combination of a port with direct access to the sea

and a regional airport, Den Helder has succeeded in transforming itself into a leading service and

knowledge centre for the offshore oil and gas industry. And, because there are still more than

enough opportunities for new development Den Helder also intends to take on an important role for

the offshore wind power sector.

Port of Den Helder

Port of Den Helder lets, develops, coordinates and facilitates business areas in the maritime port,

both on and behind the waterfront and on business estates. In close collaboration with the

Municipalities, the Royal Netherlands Navy, research institutes, education institutes and a full-scale

Operation & Maintenance Offshore Supply Chain, opportunities are offered for doing business,

learning and working in the offshore energy industry. Port of Den Helder occupies an important

position as a supply base for the oil and gas industry from which, on a daily basis, 140 gas, oil and

service platforms receive deliveries of supplies and replacement of crew members. With 2,700 port

calls of offshore related sea vessels, the harbor facilitates a growing number of offshore energy

related business.

Den Helder Airport

Den Helder Airport has become one of the largest offshore heliports of North-West Europe.

Helicopters are daily transporting offshore personnel to and from the rigs and oil- and gas producing

platforms on the Dutch Continental Shelf. In recent years, the number of landings has increased to a

total of 22.850 and an average of 140,000 passengers per year pass through the check-in of Den

Helder Airport.

Over the next few years, Den Helder Airport aims to attract new markets. Thanks to a recently

announced permit, the airport can continue to grow to 27,000 aircraft movements per year.

Den Helder Airport has been in development for more and more to form a connecting link between

the different offshore cities. The airport is working on a service between Den Helder and Aberdeen

and there are also contacts to realize the Danish Esbjerg connection. These connections provide

many benefits to the oil and gas industry, offshore wind industry and the business market.


Full-scale supply chain

The Den Helder region is strong in offshore servicing functions. The suppliers to the offshore industry

cover all categories of the capabilities of the offshore supply chain, such as Maintenance, Repair and

Operations, Research & Development, education and training, environmental assessment and

monitoring, geotechnical and site survey, metal constructions and metal works, electricity and

cabling and emergency response.


OrganisersOrganisersOrganisersOrganisers

THE NETHERLANDS BRITISH CHAMBER OF COMMERCE

Contact: Mr Michiel van Deursen

Job title: Director

Contact: Ms Joyce van de Velde

Job title: Project Manager

In the Netherlands: In the United Kingdom:

Benoordenhoutseweg 21-23 8 Northumberland Avenue

2596 BA The Hague London, WC2N 5BY

Telephone: +31 (0) 70 20 55 656 Telephone: +44 (0)3333 440799

Mobile: +31 (0) 6 51 34 25 36


Website: www.nbcc.co.uk

The NBCC is an independent membership organization aiming to promote both way trade and

investment between the United Kingdom and the Netherlands. The NBCC serves the needs of its 200

members and other clients and continuously enhances the Anglo-Dutch trade relations through its

membership and a range of commercial services.

These services include:

• trade missions

• itinerary preparation

• partner searches

• payroll services in both markets

• market research reports

• targeted lists of your prospects in the British or Dutch market

• sales support services

• company reports

In addition to our commercial services, we provide our members with a valuable platform in the

Netherlands and the United Kingdom and we organize network events in both countries frequently.

The NBCC has built a vast experience in trade and investment promotion in most of the economic

sectors represented in both countries, with particular expertise in the construction industry, oil and

gas, offshore wind energy, food and drink and textiles and clothing.


HOLLAND HOME OF WIND ENERGY

Contact: Mr Arjen Schutten


Address: Twentepoort Oost 61-04

7609 RG Almelo

The Netherlands

Telephone: +31 (0) 6 46 36 38 54


Website: www.hhwe.eu

Product/Services

Holland Home of Wind Energy (HHWE) is an independent exporters association representing the

interests of Dutch wind power companies abroad. Our mission is to initiate and support marketing

and promotional activities that will positively influence the image of the Dutch wind energy sector on

emerging wind energy markets.

HHWE provides the following services

� Effective participation at international wind energy trade shows and conferences

� Organisation of trade missions (inbound and outbound)

� Enhance mutual cooperation between HHWE and affiliated wind industry organizations

abroad to increase business

� Making up-to-date market information available for HHWE members

� Support members by arranging subsidies or other government support (e.g. market scans,

B2B matchmaking events)

IRO, ASSOCIATION OF DUTCH SUPPLIERS IN THE OIL AND GAS INDUSTRY

Contact: Mr Ruud Liem

Job title: Business Development Manager

Address: Boompjes 40

3011 XB Rotterdam

The Netherlands

Telephone: +31 (0) 79 34 11 981

Fax: +31 (0) 79 34 19 764


Website: www.iro.nl / www.iro-noc.nl

Products/services

IRO furthers the interests of the Dutch supply and service companies in the upstream oil and gas

industry. IRO represents the interests of its 440 member companies towards the government,

facilitates export promotion and subsidies for innovative technology.

IRO members also play an important role in the installation of offshore wind turbines making use of

experience and technology developed for the offshore oil and gas industry.


NotesNotesNotesNotes

Trade mission offshore wind 2016 - NBCCTrade mission offshore wind 2016 ... offshore access systems,...

Documents

Transcript of Trade mission offshore wind 2016 - NBCCTrade mission offshore wind 2016 ... offshore access systems,...