Tools, Equipment & Accessoriesfiles.constantcontact.com/1226563d001/fbeba213-76f...Operates at two...

SILICA REGULATION RECOMMENDATIONS

www.hubhasit.com

Indio Blvd.

Fred Waring Dr.

Oleander Street

Industrial Pl.

Monroe St.

PleaseCall

760-948-2339or

760-250-8136Don Willman

WestEdinger Ave.

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIN

ational City Blvd

545

West 35th Street

C Street

Highland

Broadway

4th Street

Twin O

aks Valley R

d.

785

Woodland Pkw

y.

Rancho Santa Fe

Rancheros Drive

Murrieta Hot Springs

JeffersonCorning

Pl.

Adam s A ve. Date St.

Reagan

Way Winc

heste

r Rd

.

CherrySt.

5515

215

Cher

ry

City of Paramount

City of Long Beach

Alondra

Jackson

Ora

nge

Para

mou

nt A

ve.

405 freeway5.7 miles

1863

Hegenberger Rd.

Coliseum Way

Edes Ave.

Enterprise Way

Edes Ave.8450

Landco

Gibson Street

Mohawk Street

Rosedale Hwy.

Acoma Blvd. West

Industrial

Kiowa Blvd

Lake Havasu Ave.

Commander Drive

San Fernando Rd.

California

Broadway

15

San Bernardino379 South I Street, CA 92410

909-379-2100 Fax 909-885-0983

800-966-4482

Ontario1856 E. Bon View Ave., CA 91761909-947-4669 Fax 909-947-5586

800-229-2482

Indio81735 Oleander St., CA 92201

760-341-3318 Fax 760-775-9380

800-486-4482

Hesperia

760-948-5469

800-229-4482

Santa Ana2710 Main Street, CA 92707

714-238-2130 Fax 714-238-2137

877-482-4274

San Diego-National City402 West 35th Street, CA 91950

619-409-7227 Fax 619-409-7233

800-411-7255

San Marcos804 B Rancheros Dr., CA 92069

760-744-8124 Fax 760-744-1343

800-252-5482

Murrieta41550 Reagan Way, CA 92562

951-304-3300 Fax 951-304-3303

866-482-4274

Bakersfield2815 Landco, CA 93308

661-631-9287 Fax 661-631-9549

800-585-4482

Fresno2660 S. East Ave., CA 93706

559-499-2200 Fax 559-499-0512

800-816-1227

Rancho Cordova2540 Grennan Ct. “C”, CA 95742

916-375-6600 Fax 916-375-6619

800-755-2266

Glendale5310 San Fernando Rd., CA 91203818-547-3364 Fax 818-547-6903

800-889-4482

Lake Havasu City1863 Commander Dr., AZ 86403

928-453-9109 Fax 928-453-3774

800-369-9509

Oakland8450 Enterprise Way, CA 94621

510-568-5778 Fax 510-632-2721

800-500-1906

Long Beach - Paramount16400 Garfield Ave, CA 90723

562-630-4482 Fax 562-630-4484

855-482-4274

800-966-4482888-HUBHASIt

482-4274

East Jensen Ave.

2660 S. East Ave.

1957

50Sunrise Blvd.

Sunrise Blvd.

Folsom Blvd.

Lincoln Hwy

2540Grennan Ct.

Suite C

Mercantile Dr.

Folsom Blvd.

NEW LOCATION

Tools, Equipment & Accessories

For more information regarding Silica Exposure or OSHA rulings please visit www.hubhasit.com/flyers/SilicaConstructionRegText.pdf

§1926.1153 Respirable crystalline silica.

Must be compliant by June 23, 2017

ENSURE JOBSITE COMPLIANCEAccording to OSHA’s website, the good news is that silicosis is 100% preventable! While using power tools with a dust attachment/accessory and dust extractors with the right filter, exposure to silica can be drastically reduced.

KEY PROVISIONSReduces the permissible limit (PEL) to 50 μg/m3 (micrograms of silica per cubic meter of air), averaged over an eight-hour day.

Requires employers to use:– Engineering controls (such as water or ventilation) to limit worker exposure to respira-ble silica dust to the PEL– Provide respirators when engineering controls cannot adequately limit exposure– Limit worker access to high exposure areas– Develop a written exposure control plan– Train workers on silica risks and how to limit exposures– Provide medical exams to monitor highly exposed workers and gives them information about their lung health

Establish and implement a written exposure control plan to identify tasks that involve exposure and methods used to protect workers, including procedures to restrict access to work areas where high exposures may occur. Also, employers need to designate a competent person to implement the written exposure control plan.Provides flexibility to help employers — especially small businesses — protect workers from silica exposure.

GET COMPLIANT!

The World’s First Dry-Cut Dust Control Power Cutter

You know it’s a problem. You’ve tried to avoid it, ignore it, or just deal with it, but all along you know…it’s not going away.

Dust. Or slurry, take your pick.

Your job site is going to look a lot different with no dust and without the mess from wet-cutting. You and your crew won’t be spending time every day cleaning up dust or slurry, and you’ll be cutting right at the work area without the back-and-forth to the saw 100 times a day. You and your crew won’t be breathing dust, and you’ll never have to worry about dust standards and regulations.

IT’S NOT GOING AWAY

SAVE TIME AND MONEY WITH NO MESSY, DUSTY OR WET CLEAN UP !

$ 1,950.00 COMPLETE

PC913 POWER CUTTER

IT’S NOT GOING AWAY

SAVE TIME AND MONEY WITH NO MESSY, DUSTY OR WET CLEAN UP !

$ 2,425.00 COMPLETEWITH CART

iQ360®The world’s first 14-inch masonry saw with fully-integrated dust collection on a singular power source. Cut stone, brick, pavers and tile inside or outside while maintaining a safe, dust-free work environment

14” Masonry Saw for Brick, Stone, Pavers & TileFully-Integrated Dust Collection System on Same Power Source as SawTested to Capture 99.5% of the Dust, Cut Inside or OutsideCompact & Lightweight—Easy to TransportMade of Tough High-Impact MaterialsWide Table Design Allows for Cutting Larger MaterialsPatent Pending Quick-Spin™ Filter for Easy Cleanup & RecyclingLong Lasting Filter, Replace Only Once a YearOSHA Compliant in all 50 States

sku numbersiQ360 Saw 801274Roller Table 801276Rolling Cart 801277

SKU 801275

For more information regarding Silica Exposure or OSHA rulings please visit www.hubhasit.com/flyers/SilicaConstructionRegText.pdf

THE NEW STANDARD WENT INTOEFFECT ON JUNE 23, 2016, AND

CONTRACTORS ARE REQUIRED TO COMPLY WITH ALL OBLIGATIONS OFTHE STANDARD BY JUNE 23, 2017.

Information Provided by

Contractors are required to comply with all obligations of the standard which will be enforced beginning June 23, 2017.For more information regarding Silica Exposure or OSHA rulings please visit www.hubhasit.com/flyers/SilicaConstructionRegText.pdf



TABLE 1- SPECIFIED EXPOSURE CONTROL METHODS WHEN WORKING WITH MATERIALS CONTAINING CRYSTALLINE SILICA

Husqvarna A 600A 600 is one of the most advanced portable air scrubbers available on the market. It is tested and certified for use as both an air scrubber and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. A 600 is a quiet-operating air scrubber with a sturdy, compact cabinet. Airflow speed can be set at 300 or 600 CFM. The airflow is directed upwards to avoid disturbing dust on surface.

Husqvarna A 1200A 1200 is one of the most advanced portable air scrubbers available on the market. It is tested and certified for use as both an air scrubber and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. Operates at two very quiet speeds of 600 and 1200 CFM. Thanks to the compact design, the unit is easy to move and transport. Non-marking, lockable wheels allows for easy transport.

AIR SCRUBBERS

Phases 1-ph Air requirement 300/600 cfm Weight 44 lbs Rated input power 0.5 hp

Phases 1-ph Air requirement 600/1200 cfm Weight 84 lbs Rated input power 0.8 hp

REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING

BOSCHTOOLS.COM 877-BOSCH-99

6

DU

ST

CO

LLEC

TIO

N

BREATHE EASIER The Center for Construction Research and Training explains the danger of silica exposure.

WHAT IS CRYSTALLINE SILICA?Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.

WHAT IS SILICOSIS?Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.

ARE YOU AT RISK?If you do the following to concrete, mortar, sand, rock, masonry and some paints:

f f Cut or sawf f Grindf f Drill

f f Jackhammerf f Crush or demolishf f Abrasive or sand blast

Then the answer is YES!

WHY IT’S DEADLY Inhaling crystalline silica can lead to serious, sometimes fatal illnesses including silicosis, lung cancer, tuberculosis (in those with silicosis), and chronic obstructive pulmonary disease (COPD). In addition, silica exposure has been linked to other illnesses including renal disease and other cancers. In 1996, the World Health Organization — International Agency on Cancer Research (IARC) identified crystalline silica as a “known human carcinogen” (they reaffirmed this position in 2009). The American Thoracic Society and the American College of Occupational and Environmental Medicine have also recognized the adverse health effects of exposure to crystalline silica, including lung cancer.

FOR MORE INFORMATION REGARDING SILICA EXPOSURE OR OSHA RULINGS, PLEASE VISIT CPWR’S WEBSITE SILICA-SAFE.ORG

DANGERS OF SILICA EXPOSURE






HANDHELD POWER SAWS, RIG-MOUNTED CORE SAWS OR DRILLS

HandheldPower SawsAny Blade Diameter

HandheldElectric Saws

Rig-mountedcore saws or drills

SurfacePreparation

K3000

Wet or Dry

K760

DMS-240

K3000 Dry CuttingVacuum Plate

541402591Slurry Ring

Husqvarna S-26


HusqvarnaDC3000

PG-450



Information Provided by Information Provided by

Husqvarna S-26

TABLE 1- SPECIFIED EXPOSURE CONTROL METHODS WHEN WORKING WITH MATERIALS CONTAINING CRYSTALLINE SILICA TABLE 1- SPECIFIED EXPOSURE CONTROL METHODS WHEN

WORKING WITH MATERIALS CONTAINING CRYSTALLINE SILICA



Information Provided by Information Provided by


7

OSHA SILICA STANDARD

CO

NC

RET

E

PROTECT YOURSELF & YOUR EMPLOYEESThe Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica.

ENSURE JOBSITE COMPLIANCEAccording to OSHAʼs website, the good news is that silicosis is 100% preventable! While using power tools with a dust attachment/accessory and dust extractors with the right filter, exposure to silica can be drastically reduced.

KEY PROVISIONSf f Reduces the permissible limit (PEL) to 50 μg/m3 (micrograms of silica per cubic meter of air), averaged over an eight-hour day.

f f Requires employers to use: – Engineering controls (such as water or ventilation) to limit worker exposure to respirable

silica dust to the PEL – Provide respirators when engineering controls cannot adequately limit exposure – Limit worker access to high exposure areas – Develop a written exposure control plan – Train workers on silica risks and how to limit exposures – Provide medical exams to monitor highly exposed workers and gives them information

about their lung healthf f Establish and implement a written exposure control plan to identify tasks that involve exposure and methods used to protect workers, including procedures to restrict access to work areas where high exposures may occur. Also, employers need to designate a competent person to implement the written exposure control plan.

f f Provides flexibility to help employers — especially small businesses — protect workers from silica exposure.

The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard by June 23, 2017.THE NEW STANDARD WENT INTO

EFFECT ON JUNE 23, 2016, ANDCONTRACTORS ARE REQUIRED TO

COMPLY WITH ALL OBLIGATIONS OFTHE STANDARD BY JUNE 23, 2017.

Tools, Equipment & Accessoriesfiles.constantcontact.com/1226563d001/fbeba213-76f...Operates at two...

Documents

Transcript of Tools, Equipment & Accessoriesfiles.constantcontact.com/1226563d001/fbeba213-76f...Operates at two...