Tissue Processing

45
+ ? GOOD AFTERNOON

Transcript of Tissue Processing

Page 1: Tissue Processing

+ ?

GOOD AFTERNOON

Page 2: Tissue Processing

TISSUE PROCESSING

. . . . . . . . . . . . . . .

-A histotechnique.............

Page 3: Tissue Processing

INTRODUCTIONDEFINITIONAIMPRINCIPLESTEPS CONCLUSION

CONTENTS

Page 4: Tissue Processing

INTRODUCTION

• History of tissue processing

• Histology

• Histopathology

• Histotechnologist

?

?

?

?

• SECTIONING

•EMBEDING

ALEXANDER BUTLEROV, 1859

MICROTOME

Page 5: Tissue Processing

GROSS EXAMINATION

SPECIMEN ACCESSIONING

•REQUEST FORM

• NUMBER

•COLOUR

•CONSISTENCY

•TEXTURE

Page 6: Tissue Processing

SPECIMEN LABELLING

• Should be insoluble • Should not contaminate• Should not penetrate • Should not react • Clearly identifiable• Eg:India ink, silver nitrate, alcian blue

SOFT LEAD PENCIL

Page 7: Tissue Processing

DEFINITIONThe tissue must undergo preparatory

treatment before being sectioned, entailing to impregnation of specimen with an embedding medium to provide support and suitable consistency for microtome is tissue processing.

FORMALIN ALCOHOLS XYLENE PARAFIN 10% WAX

PREPARATORY TREATMENT

FIXATION DEHYDRATION CLEARING IMPREGNATION

Page 8: Tissue Processing

To remove water from tissue and replace with a medium that solidifies to allow the thin sections of the tissue to be cut.

AIM

FIXATION DEHYDRATION

4-6mmHCT-2-3mmLC-10-20mm

Page 9: Tissue Processing

PRINCIPLE

“FICK’S LAW”

REAGENTS REAGENTS

TISSUE FLUID TISSUE FLUID

cold heat=

TEMP GRADIENTSTABILIZE POROUS TISSUE

THERMODYNAMIC TENDENCY OF PROCESSING REAGENTS

FICK’S LAW- The rate of diffusion of solutions through tissue is proportional to the concentration gradient of various tissue processing reagents.

Page 10: Tissue Processing

FACTORS EFFCTING THE RATE OF TISSUE PROCESSING(TP)

Vacuum-

Fixation-

Viscosity-

Agitation-

Heat-(45oc

) (TP)TPf Highly flammable

r

V-E-OReduced pressure 15 inches of hg

Removes air trapped, doesn’t make hard tissueMolten parafin

wax

Temp-hardens, shrinkage

CEDAR WOOD OIL, MOLTEN WAX

Page 11: Tissue Processing

STEPS1.FIXATION-

2.DEHYDRATION-

3.CLEARING

4.IMPREGNATION

5.EMBEDDING

Mini-6hrs, max-12hrs to 24hrs,25times AIM, washed in running h2o

types

ACTION, ARTIFACTS,FACTORS, TECHNIQUE

Page 12: Tissue Processing

DEHYDRATIONRemoval of unbound water & aqueous fixatives from tissue components is called Dehydration.

DEHYDRATING AGENTSEthanol- fast acting, electron microscopy specimen, clear colourless, flamable liquidIndustrial Methylated Spirit-methonol 1%+IPA, Same physical property as ethanol

Methanol- subsituted for ethanol,toxic, inflammablePropan-2-01,Isopropylealcohol- Microwave processing schedule,Butyl alcohol- plant and animal histology, slow dehydrantAcetone-Rapid in action with poor penetration, clear colorless & Inflammable liquid,Removes lipids & causes brittleness of the tissue

Universal Solvents-Tertiary butanol, Tetra hydro furan, Dioxane, dehydrate+clear, not for delicate tissues.

No shrinkage & hardness of the tissue

Page 13: Tissue Processing

TECHNIQUE

70% 80%50% 90% 100% 100%

THE GRADUAL INCREASING CONCENTRATIONS OF ALCOHOL

2- 4 hrs

7-8hrs

Page 14: Tissue Processing

•In celloidin embedding after dehydration ,tissue is transferred to a mixture of equal parts of absolute alcohol & ether.

Page 15: Tissue Processing

USE OF COPPER SULPHATE IN FINAL ALCOHOLS

.

.....

.....

.....

.....

.....

....................

white white

.....

.....

.....

BLUE BLUE

Page 16: Tissue Processing

CLEARING•Intermediate step

•Refractive index

•Boiling point

•Short chain aliphatic hydrocarbons

Page 17: Tissue Processing

CRITERIA FOR CHOOSING CLEARING AGENTS

Rapid removal of dehydrating agent

Ease of removal by melting paraffin

Minimal tissue damageToxicity

Flammability Time Cost

viscocity Stor

age

Disposal

CRITERIA FOR CHOOSING CLEARING AGENTS

Page 18: Tissue Processing

TECHNIQUE OF CLEARINGVolume of clearing agent should be 50-100 times the volume of tissue.

In chloroform or carbon tetrachloride tissues are left over night for clearing .

In Xylene,benzene,toluene tissues are given one change after 30 to 60 minutes.

Technique for cedar wood oil is different.

Page 19: Tissue Processing

CEDAR WOOD OILTECHNIQUE:-

Cedar wood oil poured into specimen jar & same quantity of absolute alcohol superimposed on it .

The specimen is placed into alcohol , it floats at the interface of two fluids.

As tissue is cleared it sinks into cedar wood oil.

The alcohol is removed & specimen is transferred to fresh cedar wood oil

Cedar wood oil

Absolute alcohol

Cedar wood oil

Page 20: Tissue Processing

In processing for electron microscopy clearing is done in 1,2 epoxy propane,2 changes 15 min in each.

15mins 15mins

ELECTRON MICROSCOPY

1,2 epoxy propane1,2 epoxy propane

Page 21: Tissue Processing

CLEARING AGENTS•Chloroform

•Toluene , Xylene , Benzene

•Carbon Tetrachloride

•Cedar Wood oil

•Methyl Benzoate , Methyl Salicylate

•Citrus Fruit Oil

Page 22: Tissue Processing

CHLOROFORM•Most common reagent used in processing of CNS specimens.

•DIS ADV:- Slower in action, Highly toxic. Does not effect refractive index of tissue.

End point of clearing can not be determined.

Expensive compared to other clearing agents.

Tissue can be left in this with out any damage for longer time, non-flammable.

•ADV:-

Page 23: Tissue Processing

CARBON TETRACHLORIDE

•Similar action as chloroform.

•Much cheaper.

•Non inflamable.

•Is toxic.

Page 24: Tissue Processing

IMPREGNATION

•Impregnation with paraffin wax is carried out in a oven heated to 54-56 degree.

•The temperature depends up on the melting point of wax used for impregnation.

•Types of impregnation oven: Electric heated oven. Vacuum embedding oven. Gas heated oven.

•Permeating the tissue with a supporting medium is called Impregnation.

Page 25: Tissue Processing

FACTORS EFFECTING IMPREGNATION

•Size & type of tissue.

•Clearing agent employed.

•Use of vacuum embedding oven.

Page 26: Tissue Processing

IMPREGNATION OVEN

Page 27: Tissue Processing

TECHNIQUE OF IMPREGNATION

•After clearing the tissue is transferred to oven maintained at 56 degree temperature.

•Volume of wax should be 25-50 times the volume of tissue.

•Wax must be changed at least once during the process.

Page 28: Tissue Processing

PARAFFIN WAX

•Should be free from dust & foreign particles.

•Should not contain water.

•Melting point should be 54degrees.

•Soft wax(45 dg) for foetal & areolar tissue.

•Hard wax (60 dg) for hard & fibrous tissue

Page 29: Tissue Processing

PARAPLAST

•Mixture of purified paraffin & plastic polymers.

•Greater elasticity than paraffin .

•Wrinkle free serial sections can be cut.

•Does not need ice application while sectioning

Page 30: Tissue Processing

ESTER WAX

•From clearing agent transfer to mixture of clearing agent & wax.

Page 31: Tissue Processing

CELLOIDIN EMBEDDING

2% celloidin:- 5-7 dayS.

4% celloidin:-5-7 days.

8% celloidin:-2-3 days.

Page 32: Tissue Processing

L.V.N

•5% L.V.N:- 3-5days.

•10%L.V.N:-2-3days.

•20%L.V.N:-1 day.

Page 33: Tissue Processing

DOUBLE EMBEDDING

Tissue is impregnated in a mixture of celloidin& methyle benzoate.

Page 34: Tissue Processing

ARTIFACTS

•In adequate impregnation leads to loss of architectural details.

Page 35: Tissue Processing

AUTOMATIC TISSUE PROCESSOR

•All the before mentioned procedures upto the impregnation step can be done automatically in a single, unmanned instrument , which is the Automated Tissue processor.

Page 36: Tissue Processing

AUTOMATIC TISSUE PROCESSOR

•Transfer tissue both by day & night.

•Reduce time in each fluid by continual agitation.

•The 24hr clock is provided.

•Allows rapid processing.

•Racks to carry 25 cassettes.

•Eliminates human error.

Page 37: Tissue Processing

•Tissue containers: Has 24 containers subdivided into 2 Compartments.

•Beakers &Wax baths: Provided with 10 beakers for reagents & 2 wax baths maintained at 56 degree temp. .

•Stirring Mechanism: One arm supports stirring mechanism.

Page 38: Tissue Processing

• Time Mechanism: Consists of 1hr,24hr or 7-day electric Clock which has a time disc.

•Disc revolves once in 24hrs.

Page 39: Tissue Processing

MICOROWAVE PROCESSING

•Invented by percy spencer in 1945.

•Based on principle, that heat peaks up diffusion of liquids in & out of tissues.

•Steps:- Dehydration. Clearing. Impregnation.

Page 40: Tissue Processing

PROCESSING SCHEDULES -Thin sections less than 1mm -- 25 min. -For medium sections 1-2mm -- 60 min. -For thick sections 2-5mm --165 min.

•Isopropanol is used as clearing agents in microwave processing instead of xylene.

PROCESSING SCHEDULE FOR MICROWAVE PROCESSING•Dehydration with ethyl alcohol at 67 d-centigrade for 5 min.•Clearing with isopropyl alcohol at 74 d-centigrade for 3 min. •Impregnation with paraffin at 65 d-centigrade for 2 min.•Followed by 80 d-centigrade for 5 min.

Page 41: Tissue Processing
Page 42: Tissue Processing
Page 43: Tissue Processing

• Tissue processing is a very much critical step that needs to be monitored with utmost care.

• Since it takes longer time to process the tissue, any mistakes alters the tissues requiring repetition.

• The tissues should not be under processed or over processed that may hamper the tissue details.

• It is essential that the tissues are processed with proper techniques and rendered them for subsequent steps.

CONCLUSION

Page 44: Tissue Processing

•To get sections of diagnostic value, processing of tissue should be done with appropriate reagents & embedded in suitable embedding medium depending upon type of tissue.

Page 45: Tissue Processing

Thank You!!!

REFERENCES

•Hand book of histopathologic techniques: C.F.A. CULLING.

•Theory & practice of histological techniques: JHON.D.BANCROT•Internet source, W.W.W.histotechniques.com, youtube.com