The 7 Manufacturing Technology Engineers 2018
Transcript of The 7 Manufacturing Technology Engineers 2018
2(Tue.)~5(Fri.) October 2018Millennium Seoul Hilton Hotel, Korea
The 7th International Conference of Manufacturing Technology Engineers 2018
www.icmte.org
Topics and Scope- Advanced Machine Tools- Robots and Automation- IT/BT Fusion Systems- Applied Optical Energy- Ultra-precision Nanomachining- Smart Manufacturing and Smart Factory
- Green Energy Application- Printable Electronics- Medical System- Tool and Die- Nano/Micro System- Etc.
- Design and CAE- Vibration and Control- Green Manufacturing System- Carbon Convergence- Ocean Plant Manufacturing Technologies
- Integrated Manufacturing System- Test and Analysis of Machine Tools- Polymer Processing- Smart Machine Tool- NDE Monitoring for Parts
www.imcc1983.org
Chinese Production Engineering Institute, CMES(CPEI)
International Conference of Manufacturing Technology Engineers
Honorary Chair
Prof. Soohun Lee (Ajou University, Korea)
General Chair
Prof. Heeyoung Maeng (Seoultech, Korea)
Prof. Dongming Guo (Dalian Univ. of Technol., China)
Conference Chair
Prof. Seog-Young Han (Hanyang University, Korea)
Prof. Jun Ni (Shanghai Jiao Tong Univ., China)
Advisory Committee
Advisory Committee Chair
Mr. Jong hyun Jung (KOMMA, Korea)
Advisory Committee Members
Prof. Sung Hyun Han (Kyungnam University, Korea
Prof. Jun Hee Hong (Chungnam National University, Korea)
Prof. Kyuwon Jeong (Chungbuk Natianal University, Korea)
Prof. Sinyoung Lee (Kunsan National University, Korea)
Prof. Hong-Seok Park (University of Ulsan, Korea)
CEO Hong-Suk Seo (Samchully Machinery Co., Ltd, Korea)
Prof. Hyun Ik Yang (Hanyang University, Korea)
Steering Committee
Steering Committee Chair
Prof. Seog-Young Han (Hanyang University, Korea)
Steering Committee Vice Chairs
Prof. Min Sung Hong (Ajou University, Korea)
Prof. Byeong Hee Kim (Kangwon National University, Korea)
Prof. Deug Woo Lee (Pusan National University, Korea)
Dr. Nakkyu Lee (Korea Institute of Industrial Technology, Korea)
Prof. Fengzhou Fang (Tianjin University, China)
Prof. Ning He (Nanjing Unive. of Aeronautics and Astronautics, China)
Prof. Chuanzhen Huang (Shandong University, China)
Steering Committee Members
Prof. Young Hak Cho (Seoultech, Korea)
Prof. Young Tae Cho (Jeonju University, Korea)
CEO Kyung Hwa Choi (CAD&Graphics, Korea)
Dr. Hyungho Chun (KEIT, Korea)
Prof. Jinwei Fan (Beijing University of Technology, China)
Dr. Han Su Jeon (KEIT, Korea)
Prof. Yongho Jeon (Ajou University, Korea)
Prof. Seong Chan Jun (Yonsei University, Korea)
Prof. Byeong Hee Kim (Kangwon National University, Korea)
Mr. Chang Hun Kim (KEIT, Korea)
Mr. Kyungdong Kim (KOMMA, Korea)
Prof. Seong Il Kim (Sehan University, Korea)
Prof. Seong Keol Kim (Seoultech, , Korea)
Prof. Seong-Jae Kim (Dong-A University, Korea)
Prof. Tae-Woo Kim (Kookmin University, Korea)
Prof. Qiang Liu (Beihang University, China)
Prof. Eungki Lee (Kongju National University, Korea)
Dr. Jun Seok Lee (KEIT, Korea)
Mr. Sangjun Lee (MFG, Korea)
Mr. Dong Ho Moon (KOMMA, Korea)
Dr. Sung-Ho Nam (KEIT, Korea)
Prof. Hyung Wook Park (UNIST, Korea)
Prof. Min Soo Park (Seoultech, Korea)
Dr. Changsup Shim (KEIT, Korea)
Prof. Yong Tang (South China University of Technology, China)
Prof. Sandy S. To (The Hong Kong Polytechnic Univ., Hong Kong)
Prof. Chengyong Wang (Guangdong University of Technology, China)
Dr. Yeong-Eun Yoo (Korea Institute of Machinery & Materials, Korea)
Prof. Jaewoong Youn (Daegu University, Korea)
Prof. Julong Yuan (Zhejiang University of Technology, China)
Program Committee
Program Committee Chair
Prof. Shinill Kang (Yonsei University, Korea)
Program Committee Members
Prof. Sung-Hoon Ahn (Seoul National University, Korea)
Prof. Seunghyun Baik (Sungkyunkwan University, Korea)
Prof. Jaesang Cha (Seoultech, Korea)
Prof. Ming Chen (Shanghai Jiao Tong University, China)
Dr. Sung-Hak Cho (Korea Institute of Machinery & Materials, Korea)
Prof. Hae-Jin Choi (Chung-Ang university, Korea)
Prof. Doo-Man Chun (University of Ulsan, Korea)
Prof. Yifan Dai (National University of Defense Technology, China)
Prof. Jun Hong (Xi'an Jiaotong University, China)
Prof. Han Sub Hwang (Suwon Science College, Korea)
Prof. Zhenyuan Jia (Dalian University of Technology, China)
ICMTE Committee
- 1 -
International Conference of Manufacturing Technology Engineers
Prof. Lan Jiang (Beijing Institute of Technology, China)
Prof. Hyun Wook Kang (Chonnam National University, Korea)
CEO Boo Tae Kim (A-Optics Co., Ltd., Korea)
Prof. Byung-Ki Kim (Korea Univ. of Technology and Education, Korea)
Dr. Duck-Jong Kim (Korea Institute of Machinery & Materials, Korea)
Mr. Kang-gyu Kim (SAMBO CORPORATION, President, Korea)
Dr. Hyunse Kim (Korea Institute of Machinery & Materials, Korea)
Dr. Kyung Han Kim (Korea Institute of Machinery & Materials, Korea)
Prof. SeeJo Kim (Andong National University, Korea)
Prof. Seok-min Kim (Chung-ang University, Korea)
Prof. Su-Jin Kim (Gyeongsang National University, Korea)
Prof. Sun Kyoung Kim (Seoultech,, Korea)
Prof. Seung Hwan Ko (Seoul National University, Korea)
Prof. Hong Hyuk Kwon (Daejin University, Korea)
Prof. Daeho Lee (Gachon University, Korea)
Dr. Dong Yoon Lee (Korea Institute of Industrial Technology, Korea)
Prof. Donghyun Lee (Chung-Ang university, Korea)
Managing Director Dongyeoul Lee (VINATech Co., Ltd., Korea)
Dr. Gyu-Bong Lee (KOSMIA, Korea)
Prof. Hocheol Lee (Hanbat National University, Korea)
Prof. Ho-Sang Lee (Korea National University of Transportation, Korea)
Prof. Hyung-Suk Lee (Yonsei University, Korea)
Dr. Jae Jong Lee (Korea Institute of Machinery & Materials, Korea)
Prof. Joon Sang Lee (Yonsei University, Korea)
Dr. Kang Jae Lee (Doosan Infracore, Korea)
Dr. Seokwoo Lee (Korea Institute of Industrial Technology, Korea)
Dr. Seung-Hyun Lee (Korea Institute of Machinery & Materials, Korea)
Dr. Soo Hyun Lee (Korea Institute of Science and Technology, Korea)
Dr. Tae-Hong Lee (Osan University, Korea)
Dr. Taik-Min Lee (Korea Institute of Machinery & Materials, Korea)
Prof. Jiseok Lim (Yeungnam University, Korea)
Prof. Sungsu Lim (Kyung Hee University, Korea)
Dr. Jeha Oh (Korea Institute of Carbon Convergence Technology,
Korea)
Prof. Jong Geol Ok (Seoultech, Korea)
Dr. De-Yu Park (Hwacheon Machine Tools, Korea)
Dr. Dong Hwan Park (Gyeongbuk Hybrid Technology Institute, Korea)
Prof. Inkyu Park (KAIST, Korea)
Prof. Jeong Woo Park (Chosun University, Korea)
Dr. Kyongho Park (LS Mtron Ltd., Korea)
Dr. Su A Park (Korea Institute of Machinery & Materials, Korea)
Prof. Won Hyoung Ryu (Yonsei University, Korea)
Dr. Joon Hyuk Song (Korea Institute of Carbon Convergence
Technology, Korea)
Prof. Jeong-Yun Sun (Seoul National University, Korea)
Prof. Dunbin Tang (Nanjing University of Aeronautics and Astronautics,
China)
Prof. Taiyong Wang (Tianjin University, China)
Prof. Yingxue Yao (Harbin Institute of Technology, China)
Organizing Committee
Organizing Committee Chair
Prof. Sang Won Lee (Sungkyunkwan University, Korea)
Organizing Committee Vice Chairs
Dr. Seungkook Ro (Korea Institute of Machinery & Materials, Korea)
Prof. Bing-Feng Ju (Zhejiang University, China)
Organizing Committee Members
Dr. Ho Choi (Research Institute of Industrial Science and Technol.,
Korea)
Dr. Jin Hyeok Jeong (Samsung Electro-Mechanics, Korea)
Prof. Martin Jun (Purdue University, USA)
Dr. Chang Ju Kim (Korea Institute of Machinery & Materials, Korea)
Prof. Hong Seok Kim (Seoultech, Korea)
Prof. Taejung Kim (Dankook University, Korea)
Dr. Kyung-Hee Park (Korea Institute of Industrial Technology, Korea)
Prof. Simon Park (University of Calgary, Canada)
Secretary
Contact Information
Sacretariat : Jisook Kim and Jieun Lee
The Korean Society of Manufacturing Technology Engineers
(04323) A - 1206 Centreville Asterium Seoul, 372, Hangang-daero,
Yongsan-gu, Seoul, Korea
TEL : +82-(0)2-501-9172, +82-(0)2-310-9172
FAX : +82-(0)2-501-9173
General E-mail : [email protected]
ICMTE Committee
- 2 -
International Conference of Manufacturing Technology Engineers
On behalf of the Organizing Committee, it is our great honor and pleasure to announce that the
2018 International Conference of Manufacturing Technology Engineers (ICMTE 2018) will be held in
Seoul, Korea.
The conference is aimed at facilitating interactions among engineers in the fields of mechanical design
& CAE, manufacturing, robotics & automation, with special focus on some cutting-edge fields, such
as nanotechnology and sustainable manufacturing, etc.
The manufacturing technology is playing a key role not only in current industry and economy, but
also in creating high quality jobs for society. Many countries also have stressed the importance of
manufacturing fields as their governmental policy. In addition, the globalization of production and
market demands mutual cooperation among countries under severe competition. Hence we hope this
conference will provide a good opportunity to exchange professional experiences and to boost
cooperative fellowships.
Seoul is one of the world's most fascinating cities, which has been the center of politics, culture,
commerce and finance in Korea. Seoul is also a historical city, the ancient capital of the Joseon Dynasty,
with many tourist attractions, including old palaces and gardens. In Seoul, the past and the present
meet together and coexist in harmony. You will be able to enjoy both the flavor of the traditional
Korean culture and the excitement of a sprawling metropolitan city. In addition, October is the best
season to visit Korea and we hope you will have a great time in Seoul.
We are looking forward to meeting you in October.
Thank you!
General Chairs
Prof. Hee Young Maeng
Seoul National Univ. of Science & Technology
Prof. Dongming Guo
Dalian University of Technology
Conference Chairs
Prof. Seog-Young Han
Hanyang University
Prof. Jun Ni
Univ. of Michigan/Shanghai Jiao Tong Univ.
Welcome Message
- 3 -
◈ Directions
Located in the heart of Korea’s cosmopolitan capital and at the foot of the scenic Mt. Namsan, Millennium Seoul
Hilton offers amazing views of the city, with the KTX train station, local subway station and bus stops nearby, the
hotel is ideally situated to allow convenient access to the business districts, shopping hotspots and cultural and
historic attractions.
◈ From Incheon Int’l Airport(ICN) to Millenium Seoul Hilton
� By Limousine Bus (No.6702)
Take the Airport Limousine bus 6702 from bus stop 3B(Terminal 1) or 17, 18, 19(Terminal 2). You may get
information and purchase bus ticket at the bus stop or the KAL Limousine Counter located in the arrival hall
between exit 4 and 5 (Terminal 1). You may also purchase bus ticket at Transportation Information Counter
(Terminal 2).
- Route Name (Bus No.) : Incheon-Namsan (No. 6702)
- Traveling Time: 70-120 Mins
- Fare (KRW): 16,000
Route Name
(Bus No.)
Traveling
Time
Fare
(KRW)
Airport to Hotel
Hotel to Airport
Operation
HoursBus Stop
Incheon-
Namsan
(No. 6702)
70-120 Mins 16,000
From Incheon Int'l Airport
to Millenium Hilton Seoul04:58 - 22:55
3B, 4A (T1) Transportation Center
B1 Bus stop No.17~19(T2)
From Millenium Hilton Seoul
to Incheon Int'l Airport05:17 - 19:16 Hotel Front
ICMTE : Venue Millenium Hilton Hotel, Seoul, Korea
- 4 -
� By Taxi
Route Operation Hours Travelling Time Fare (KRW) Platform Number
ICN-Millenium Hilton Seoul
(6702)Continuously available 65-70 Mins 70,000-90,000 4D-8C
� By Subway
Route Operation Hours Travelling Time Fare (KRW) Getting to AREX
ICN-Seoul Station
(AREX)05:15-23:50 65-75 Mins
Express: 9,000 /
All stop: 4,150B1F
◈ From Gimpo Int’l Airport(GMP) to Millenium Seoul Hilton
� By Limousine Bus
Take the Airport Limousine Bus 6021(To Dongdaemun) at Limousine Bus stop 4(Domestic) or 6(International).
You may get information and purchase bus ticket at the bus stop.
- Route Name (Bus No.) : GMP-Seoul Station (6021)
- Traveling Time: 40-60 Mins
- Fare (KRW): 7,000
Route Name
(Bus No.)
Traveling
Time
Fare
(KRW)
Airport to Hotel
Hotel to AirportOperation Hours Bus Stop
GMP - Seoul
Station (6021)40-60 Mins 7,000
From Gimpo Int' l Airport to
Millenium Hilton Seoul05:02 - 23:12 4(Domestic), 6(International)
From Millenium Hilton Seoul
to Gimpo Int'l Airport
(Based on Departure
from Myeong-dong)
06:00~21:00
Right next to Korea
Housing-Finance Corporation,
IBK Bust Stop No. 02665
� By Taxi
Route Operation Hours Travelling Time Fare (KRW) Taxi Stand
Gimpo Int'l Airport →
Millenium Hilton Seoul
Continuously
available65-70 Mins 40,000-60,000
Gate 8(Domestic), Exit the terminal
and across the road(Int'l)
� By Subway
Route Operation Hours Travelling Time Fare (KRW) Getting to AREX
GMP-Seoul Station (AREX) 05:15-23:50 35-40 Mins 1,450 B1F
❚❚ Registration
Registration Information
Registration Date : Oct. 02 (Tue.), 18:00 ~
Registration Fee
Category Regular Student
On-Site
Registration
KRW ₩ 700,000 ₩ 350,000
USD $ 600 $ 300
- 5 -
Oct. 2 (Tue.)
Division Time Contents
Registration and Reception 18:00~ Registration and Welcome Reception
Oct. 3 (Wed.)
Division Time Contents
Pre-conference Social Networking
09:00~Pre-conference Social Networking
Oct. 4 (Thu.)
Division Time Contents
Registration 09:00~ Registration and Information
Opening Ceremony 09:30~10:00 Opening Ceremony
Plenary Speech10:00~10:30
Keynote Speech 1 & 210:30~11:00
Break 11:00~11:30 Coffee Break
Plenary Speech 11:30~12:00 Keynote Speech 3
Networking Lunch 12:00~13:30 Lunch
Plenary Speech13:30~14:00
Keynote Speech 4 & 5 14:00~14:30
Break 14:30~15:00 Coffee Break
Oral Presentation15:00~16:00 Parallel Session 1
16:00~17:15 Parallel Session 2
Poster Presentation 17:15~18:20 Poster Session 1
Awards Ceremony & Conference Dinner
18:20~20:00 Dinner
Oct. 5 (Fri.)
Division Time Contents
Registration 08:30~ Registration and Information
Poster Presentation 09:00~10:00 Poster Session 2
Post-conference Tour 10:00~17:30 Post-conference Technical Tour
ICMTE 2018 Schedule
- 6 -
◉ Plenary Speech Part 1
Keynote Speech 1
Speech title : Fabrication of Thin-film Device for Next Generation
using a Photo-thermochemical Reaction of Nano-materials
Speaker : Minyang Yang, Professor, KAIST, Korea
Date : Oct. 4 (Thu.), 10:00~10:30
Keynote Speech 2
Speech title : Digital Transformation in Manufacturing Industry
Speaker : Dieter Schletterer, Vice President, Siemens Ltd, Korea
Date : Oct. 4 (Thu.), 10:30~11:00
◉ Plenary Speech Part 2
Keynote Speech 3
Speech title : New Process Development and Practical Applications for Binder Jet
Printing (BJP)
Speaker : Patrick Kwon, Professor, Michigan State University, U.S.A.
Date : Oct. 4 (Thu.), 11:30~12:00
◉ Plenary Speech Part 3
Keynote Speech 4
Speech title : Micro/Nano Mechanical Machining Technique Based on the Normal
Force Control
Speaker : Yongda Yan, Professor, Harbin Institute of Technology, P.R. China
Date : Oct. 4 (Thu.), 13:30~14:00
Keynote Speech 5
Speech title : The Advanced Measurement Technology for Precision Manufacturing and
the Trend
Speaker : Shuming Yang, Professor, Xi’an Jiaotong University (XJTU), P.R. China
Date : Oct. 4 (Thu.), 14:00~14:30
- 7 -
Exhibition of Core Research Laboratories in Korean Universities and
Institutes for Global Research Cooperation
The 2018 International Conference of Manufacturing Technology Engineers
(ICMTE 2018) Program Committee cordially invites you to join the Korea
Advanced Manufacturing Research Laboratory Remote Tour. The purpose of this
tour is to advertise the research outcomes of excellent Korean manufacturing
research laboratories and to encourage the research cooperation between the
participating laboratories and the domestic/international participants of the ICMTE
2018.
We have selected 18 excellent research laboratories, and each laboratory will
exhibit their major research results and products during the ICMTE 2018. The
list of participating laboratories is included in the conference program book.
We look forward to active and constructive networking among participating
researchers and practitioners during the ICMTE 2018.
Yours faithfully,
ICMTE 2018 Program Committee
Korea Advanced Manufacturing Research Lab. Remote Tour
- 9 -
Booth
No.
Banner
No.Organization Laboratory
1 1 Kangwon National University Micro,Nano,Bio,Systems Lab
2 2 Ajou UniversityIntelligent Multiscale Design & Processing
Lab.
3 3 Sungkyunkwan UniversitySustainable Design and
Manufacturing Laboratory
4 4 KOMMAIndustry Promotion Team
5 4 KOMMA
6 5 AM KOREA Co., Ltd Sales
7 6Clean Production Technology
Research Consortium
Development of Power Cord Plug
and Research of NonPhthalate PVC
8 7 SAMBO CORPORATION Technical Sales Department
9 8 SINDOH 3D BUSINESS DIVISION
10 9 Hankook Delcam LTD Education Consulting Team
11 10 HANKOOK ARCHIVE INC.3D Scanner, 3D Printer,
3D Solution Department
12 11Korea Institute of Science
and Technology Information
Supercomputing Modeling & Simulation
Center
13 12
Seoul National University of
Science and Technology
& TAESAN SOLUTIONS LTD
Department of Mechanical System
& Design Engineering
14 13Korea Institute of Machinery
and MaterialsNanomachining & Molding Team
15 14Korea Institute of Machinery
and Materials
Department of UltraPrecision Machines
and Systems : Mobile Machining System
16 15Daegu Mechatronics &
Meterials Institute
R&D Center for Advanced
Cutting Tools &Tooling
17 16 KITECH MicroFactory Technology Center
18 17 KITECHKorea Additive Manufacturing
Innovation center
Booth List Korea AdvancedManufacturing Research Lab. Remote Tour
- 10 -
International Conference of Manufacturing Technology Engineers
Oct. 2 (Tue.) Oct. 3 (Wed.) Oct. 4 (Thu.) Oct. 5 (Fri.)
9:00
Arrival & WelcomePre-conference
Social Networking
RegistrationPoster Session 2
9:30 Opening Ceremony
10:00
Keynote Speech 1 & 2
Post-conference
Technical Tour
10:30
11:00 Coffee Break
11:30 Keynote Speech 3
12:00
Networking Lunch12:30
13:00
13:30
Keynote Speech 4 & 514:00
14:30 Coffee Break
15:00
Parallel Session 115:30
16:00
Parallel Session 216:30
17:00
Poster Session 1 17:30
18:00
Registration &
Welcome Reception
Awards Ceremony &
Conference Dinner
18:30
19:00
19:30
20:00
Program at a Glance ICMTE 2018
- 11 -
Place (floor)
Registration Oct. 2 (Tue.) Lobby - 3 Floor
Registration
Oct. 4 (Thu.) / Oct. 5 (Fri.)Lobby - LL Floor
Welcome Reception Oct. 2 (Tue.) Coral - 3 Floor
Parallel Session [Ⅰ-1] Grand Ballroom A - LL Floor
Parallel Session [Ⅰ-2] Grand Ballroom A - LL Floor
Parallel Session [Ⅱ-1] Grand Ballroom B - LL Floor
Parallel Session [Ⅱ-2] Grand Ballroom B - LL Floor
Parallel Session [Ⅲ-1] Grand Ballroom C - LL Floor
Parallel Session [Ⅲ-2] Grand Ballroom C - LL Floor
Plenary Session Grand Ballroom - LL Floor
Banquet
(Awards Ceremony & Conference Dinner)Grand Ballroom - LL Floor
Exhibition Lobby - LL Floor
Poster Session 1 (Oct. 4 (Thu.)) Lobby (Grand Ballroom) - LL Floor
Poster Session 2 (Oct. 5 (Fri.)) Lobby (Junior Ballroom) - LL Floor
VIP Lounge (Oct. 4 (Thu.)) VIP Room - LL Floor
Place
- 12 -
⊙ Parallel Session [Ⅰ- 1]Session Chair: Changhyun Roh (Korea Atomic Energy Research Institute)
Advanced Machine Tools Grand Ballroom A - LL Floor
15:00~15:15 Predictive cutting force modeling for cryogenic endmilling of Ti6Al4V alloy
Do Young Kim*, Hyung Wook Park(Ulsan National Institute of Science and Technology),
Dong Min Kim,(Ulsan National Institute of Science and Technology, Purdue University)
15:15~15:30 A hybrid surface modification of AISI 304 stainless steels using a high power diode
laser and large pulsed electron beam
Jisoo Kim*, Sankara Narayanan T. S. N., Hyung Wook Park
(Ulsan National Institute of Science and Technology)
15:30~15:45 Experimental study on microdrilling of carbon fiber reinforced plastic (CFRP) composite
with nanosolid lubrication
Jin Woo Kim*, Byoung Joo Kang, Sang Won Lee(Sungkyunkwan University)
15:45~16:00 Improvement of drilling efficiency in micro drilling of fused silica using EDMed PCD
tools
Pyeong An Lee*, Bo Hyun Kim(Soongsil University)
⊙ Parallel Session [Ⅰ- 2]Session Chair: Changhyun Roh (Korea Atomic Energy Research Institute)
Smart Manufacturing and Smart Factory Grand Ballroom A - LL Floor
16:00~16:15 Experimental research on the integration of heterogeneous system information for
titanium alloy blade adaptive belt grinding
Gui-Jian Xiao*, Quan Li, Yun Huang, Yin Liu, Wen-Tao Dai(Chongqing University)
16:15~16:30 Design and analysis of an origamiinspired deployable grasping manipulator
Xin Guo, Changqing Gao, Hailin Huang, Bing Li, Yingxue Yao, Guanglu Jia*
(Harbin Institute of Technology (Shenzhen))
16:30~16:45 Fault diagnosis modeling of industrial robot gear based on convolutional neural
network
Jiwoong Lee*, Sang Ik Jeong, Inwoong Noh, Sang Won Lee(Sungkyunkwan University)
16:45~17:00 Datadriven fault diagnosis using ensemble learning
Soonyoung Han*, Hae-Jin Choi(Chung-Ang University)
17:00~17:15 A wavefront fitting and surface stitching method based on Zernike polynomials
Cheng Chen*, Bingfeng Ju, Xiaoyu Yang, Anyu Sun(Zhejiang University)
Oct. 4 (Thu.)
- 13 -
⊙ Parallel Session [Ⅱ- 1]Session Chair: Hyub Lee (Korea Institute of Industrial Technology)
Design and CAE / Automation Grand Ballroom B - LL Floor
15:00~15:15 Deep learning approach for topology optimization
Kyeong-Hwan Kim*, Hye-Ji Gu, Seog-Young Han(Hanyang University)
15:15~15:30 A hybrid 3D printing method to develop embedded smart sensors
Zhong Yang Chua, Seung Ki Moon*(Nanyang Technological University), Byunghoon Lee,
Jamyeong Koo(Samsung Electronics Co., Ltd.)
15:30~15:45 A threeaxis robotic arm system for workpiece positioning and grasping based on
monocular vision
Yukun Shi*, Bingfeng Ju(Zhejiang University)
15:45~16:00 Centering method based on workpiece under test for rotationalscanning-based surface
metrology systems
Wenhao Zhang*, Bingfeng Ju, Huilin Du, Anyu Sun(Zhejiang University)
⊙ Parallel Session [Ⅱ- 2]Session Chair: Seung-Kook Ro (Korea Institute of Machinery and Materials)
Green Energy Application Grand Ballroom B - LL Floor
16:00~16:15 Sintering of chemical solution deposited lanthanum nickelate thin film via intense
pulsed light (IPL)
Jung-Hum Park*, Young-Beom Kim(Hanyang University)
16:15~16:30 Intense pulsed light (IPL) sintering of La0.8Sr0.2Mn1O3-δ perovskite electrode material
fabricated by electrostatic spray deposition(ESD)
Seokwon Kong*, Youngbeom Kim(Hanyang University)
16:30~16:45 Investigation of the enhanced natural convection on a nanoengineered surface
Jae-Wan Lee*(Yonsei University), Tae-Kyung Kim, Chul Park, Shinill Kang
(Yonsei University, Nano Fabrication and Micro Optics National Research Laboratory)
16:45~17:00 Nondimensional parameter study on residence time distribution in the single-screw
extrusion process
See Jo Kim*(Andong National Univ.), Jun Ho Moon, Woojin Kim
(Korea Institute of Industrial Technology)
17:00~17:15 Fabrication of aramid-filled composite using stereolithography apparatus (SLA) process
Pil-Ho Lee*(Michigan State University), Jung Sub Kim(Sungkyunkwan University),
Sang Won Lee(Sungkyunkwan University)
- 14 -
⊙ Parallel Session [Ⅲ- 1]Session Chair: Hyunse Kim(Korea Institute of Machinery and Materials)
Tool and Die Grand Ballroom C - LL Floor
15:00~15:15 An experimental and numerical investigation of hotcold forging technology
Dong-Hwan Park*(Gyeongbuk Hybrid Technology Institute), Hee-Jung Kim, Sung-Min Kwon
(Kyung-Chang Precision Co., Ltd.), Hyuk-Hong Kwon(Daejin University)
15:15~15:30 Experimental characterization on directed energy deposition process using stainless
steel 316L powder
Jung Sub Kim*, Sang Won Lee(Sungkyunkwan University)
15:30~15:45 Fabrication of Rolltype vitreous carbon mold for continuous glass molding process
Muhammad Refatul Haq*, Young Kyu Kim, Jun Kim, Seok-min Kim
(Chung-Ang University)
⊙ Parallel Session [Ⅲ- 2]Session Chair: Hyunse Kim(Korea Institute of Machinery and Materials)
Nano/Micro System Grand Ballroom C - LL Floor
16:00~16:15 Fabrication of atomic force microscope carbon nanotube tips based on binder solution
method
Biyao Cheng*, Shuming Yang, Liuyang Zhang(Xi'an Jiaotong University)
16:15~16:30 A platetype ultrasonic waveguide for micro chip cooling
Hyunse Kim*, Euisu Lim, Yanglae Lee(Korea Institute of Machinery and Materials)
16:30~16:45 Femtosecond laser direct writing method for microdevices based on graphene oxide
Hyub Lee*(Korea Institute of Industrial Technology), Young-Jin Kim
(Nanyang Technological University)
17:45~17:00 Noncrystalline silicon nanoparticles fabricated by high energy ballmilling for lithiumion
batteries
Mingcai Zhao*, Juan Zhang, Wei Wang(Nanjing University of Aeronautics and Astronautics)
17:00~17:15 Fabrication of slippery sticker with 3D structures
Jihoon Ahn*, Jaehyeon Jeon, Chang Sung Heu, Dong Rip Kim(Hanyang University)
- 15 -
Advanced Machine Tools
Structure design of drum type automatic tool changer cam box for horizontal machining center
Hyun-Jin Choi*(Daegu Mechatronics & Materials Institute), Hyun-deog Cho(Kyungil University),
Yong-Beom Shin(Dae Young core tech Co., Ltd,)
Fabrication and design of the cutting tool path for random lens array machining using slow tool servo
method in diamond turning process
Ji-Young Jeong*, Tae-Jin Je(Korea Institute of Machinery & Metrials, University of Science and
Technology(UST)), Doo-Sun Choi(Korea Institute of Machinery & Metrials), Eun-chae Jeon
(University of Ulsan)
Structure design of 5axis cutting system for machining of automobile's lightweight material
Chul-Woo Park*, Hyun-Jin Choi(Daegu Mechatronics & Materials Institute), Jung-Hee Lim(KMC CO., LTD.)
Structure design of highprecision laser scriber machine that enables ceramic substrate grooving
Hyun-Jin Choi*, Seung-Yong Lee(Daegu Mechatronics & Materials Institute), Youn-jun Kim
(SJINNO TECH CO., LTD.)
A novel approach to tool condition monitoring during endmilling
Gu-Seon Kang*, Jae-Hyeok Kim(Korea Institute of Industrial Technology (KITECH)), Gi-Dong Yang,
Kyung-Hee Park(Korea Institute of Industrial Technology (KITECH)), Dong Yoon Lee
(Korea Institute of Industrial Technology (KITECH))
Tribological effects of various micro pattern on a rough surface considering surface roughness
Mi-Ru Kim*, Seung-Jun Lee, Deug-Woo Lee(Pusan National University)
Development of CNC automated processing system for 3Dshaped pavement retaining systems
Suin Eun*, Junmyeong Lee, Heeyoung Maeng(Seoultech)
Structure design of 2Z column / 2head type small machining center
Seung-Yong Lee*, Hyun-Jin Choi(Daegu Mechatronics & Materials Institute)
Experimental studies on tool geometry in machining of nomex honeycomb core
Qihao Xu, Yi-Qi Wang*, Yongjie Bao, Hang Gao(Dalian University of Technology)
A path planning algorithm for a mobile machine tool with obstacle avoidance
Sang Hoon Han(Rainbow Robotics), Seung-Kook Ro*(Korea Institute of Machinery and Materials)
An analytical study on the selection of machining conditions by thermal deformation of spindle in laser
assisted machining
Ho In Jeong*, Eun Jung Kim, Choon-Man Lee(Changwon National University)
Oct. 4 (Thu.) 17:15~18:20 Poster Session 1
- 16 -
Green Energy Application
Methods and applications of subwavelength antireflective surface based on biomimetic
Daihong Huh*, Heon Lee(Korea University)
Direct patterned WO3 microcone type photoanode for water splitting
Junho Jun*, Sucheol Ju, Heon Lee(Korea University)
Applied Optical Energy
Flexible crackbased strain sensor constructed by laser transfer of silver nanoparticle
Wooseop Shin*, Younggeun Lee, Saewoong Park, Seongje Park, Jaemook Lim(Hanyang University),
Junyeob Yeo(Kyungpook National University), Sukjoon Hong(Hanyang University)
Integrated Manufacturing System
Fabrication of triboelectric sensor using textilebased elastomeric composites
Han Bit Lee*, Young Won Kim(Korea Institute of Industrial Technology, Hanyang University), Jean Ho
Park, Nak kyu Lee, Suk-Hee Park(Korea Institute of Industrial Technology)
Integrated Manufacturing System
Analysis of electromagnetic characteristics of solenoid ECT sensor and consideration of effective
magnetic particle detection method
Jung-Min Park, Houng-Kun Ann, Sang-Mo Ku*(HOJIN INDUSTRIAL CO., LTD.)
Thermographic nondestructive test by eddy current excitation
Hoo-O Lee, Jae-Sul Lee, Sang-Mo Ku*(HOJIN INDUSTRIAL CO., LTD.)
Evaluation of mechanical properties of aluminum thin plate AA6061AA5052 dissimilar welding using
FSW under high rotational speed
Seong-Hwan Park*, Hua-Feng Wu, Myung-Chang Kang(Pusan National University)
IT/BT Fusion Systems
Development of target shortage alarm system using gas diffusion capsule for DC magnetron sputter
Sun-Joo Park*, Se-Hwan Jang, Deok-Jin Kwon(Yonsei University), Kwan-Yong Lee(Samsung Display
Corporation), Young-Joo Kim(Yonsei University)
Medical System
Improvement of magnetic clip for large perforation closure in endoscopic surgery
Hyun jun Choi*, Cheol jun Jang, You-sung Kang, Soo-hun Lee, Min-sung Hong, Yong-Ho Jeon,
Moon G. Lee(Ajou University)
- 17 -
Extrusion process optimization of the thinwalled tube for medical use
Jun Ho Mun*(Korea Institute of Industrial Technology), See Jo Kim(Andong National Univ., Woojin
Kim(Korea Institute of Industrial Technology)
Numerical analysis of air quality in a ward with ventilation system
Jungsuk Lee*, Se-Jin Yook(Hanyang University)
Nano/Micro System
Microfabrication of flexible hydrophobic microstructures using 3D printing
Beom Chan Kang*, Hongyun So(Hanyang University)
A study on migration and sedimentation of microparticles in a evaporating droplet
Eunju Yeo, NguyenThi Phuong*(Korea Institute of Machinery and Materials (KIMM), University of Science
and Technology (UST)), Kwanoh Kim(Korea Institute of Machinery and Materials (KIMM)), Jeong Hwan
Kim, Yeong-eun Yoo, Doo-Sun Choi, Jae Sung Yoon(Korea Institute of Machinery and Materials (KIMM),
University of Science and Technology (UST))
Concomitant desalting and concentration of neuropeptides on a donutshaped surface pattern for
MALDI mass spectrometry
Sook Yoon*, Chang Young Lee(Ulsan National Institute of Science and Technology (UNIST))
The exterior of singlewalled carbon nanotubes as a millimeterlong cationpreferring nanochannel
Yun-Tae Kim*, Sook Yoon, Chang Young Lee(Ulsan National Institute of Science and Technology
(UNIST))
Realization of reflective structure colors by nanohole arrays with various depths
Woong-Ki Jang*, Yoo-Su Kang, Young-Ho Seo, Byeong-Hee Kim(Kangwon National University)
Prussian bluetemplated threedimensional porous scaffold for cesium adsorption
Changhyun Roh*(Korea Atomic Energy Research Institute)
Polymer Processing
Smallsize Userfriendly bioplastic disposables molding machine (Birossm)
Chan Lee*(Korea Advanced Institute of Science and Technology)
Degree of alignment of polymer nanofibers electrospun between dielectric particles
Shichen Li*, Bong-Kee Lee(Chonnam National University)
Effect of melt temperature on film thickness distribution in film insert injection molding
Showmik Azam*, Bong-Kee Lee(Chonnam National University)
Morphology of inkjetprinted lines of a thermoresponsive hydrogel: jetting speed vs dehydration speed
Yoon-Jae Moon*, Jun Young Hwang(Korea Institute of Industrial Technology), Bumsoo Han
(Purdue University)
- 18 -
Design of heat sink for motor bobbin using conductive thermoplastic composite
Sang Won Woo*(Korea Institute of Machinery and Materials, Seoul National University of Science and
Technology), Si-Hwan Park(Ulsan College), Sun Kyoung Kim(Seoul National University of Science and
Technology), Yeong-Eun Yoo(Korea Institute of Machinery and Materials)
Printable Electronics
The application of a softmagnet powder mixture on a PET substrate for use as an electromagnetic
interference shielding film
Sang Hoon Kim*, Dong Seok Kang, Dae Keun Choi, Si-Mo Yeon, Yong Son, Jean Ho Park,
Nak Kyu Lee(Korea Institute of Industrial Technology)
Digital fabrication of paper electronics using solid film transfer
Seunghyun Back*, Liyana Hazwani Binti Zamri, Ingu Kang, Bongchul Kang
(Kumoh National Institute of Technology)
Tool and Die
Development of drill monitoring system in Ti6Al4V drilling process using infrared sensor
Min-Jae Jeong*, Hyung Jin Kim, Young Ho Seo, Byeong Hee Kim(Kangwon National University)
Surface morphology characteristics of micro lens array by diamond milling
Young Bok Kim*(Korea Photonics Technology Institute, Chonnam National University), June Park,
Wee Sam Lee, Ju Hyeon Choi(Korea Photonics Technology Institute), June Key Lee
(Chonnam National University)
- 19 -
Robots and Automation
3D positioning system based on absolute distance measurement
Seongheum Han*, Seungman Kim, Seung-Kook Ro, Jeong-Seok Oh(Korea Institute of Machinery and
Materials(KIMM))
A study on realistic color correction technology of 3D shape scan data
Chang-Hyuk Lim*, Su-in Eun, Heeyoung Maeng(Seoul National University of Science and Technology)
A Study on the error of shape accuracy of 3D scanning data according to the coating condition of
diffuse reflecting surface
Jaehyun Kim*, Suin Eun, Heeyoung Maeng(Seoultech)
Development of spherical coordinate system using rotary table
Suin Eun*, Heeyoung Maeng(Seoul National University of Science and Technology)
The study on the flexural behavior for composite joints with different shimming conditions
Yuxing Yang, Yi-Qi Wang*, Xueshu Liu, Hang Gao, Yongjie Bao(Dalian University of Technology)
A location-based assistance system (LAS) for online programming of industrial robot using Adaptive
User Interface (AUI)
Hyungjung Kim, Pablo Antonio Abrego Serrano*(Seoul National University), Il Woo(R&D, Doosan
Robotics), Sung-Hoon Ahn(Seoul National University)
Smart Machine Tool
Monitoring of milling process based on virtual machining
Dong Yoon Lee*(Korea Institute of Industrial Technology)
Development of a smart machining system for optimizing linking path
Hong-Seok Park*, Bowen Qi(University of Ulsan), Dae Yu Park(HWACHEON Machine Tool Co., Ltd.)
Smart Manufacturing and Smart Factory
A study on feature extraction from sensor data for robot-based spot welding quality detection
Jiwoong Lee*, Sang Ik Jeong, Inwoong Noh, Sang Won Lee(Sungkyunkwan University)
Finding the most efficient layout using DMworks simulation
Hyo-Jun Yoon*, Soo-Hun Lee, Min-Sung Hong, Moon-Gu Lee, Yong-Ho Jeon(Ajou University)
Smart manufacturing strategy for korean SMEs: KITECH's PICT RAIDS
Jiyong Park*, Jungsoo Nam, Useok Jeong, Ki Ho Park, Taek-Soo Kim
(Korea Institute of Industrial Technology)
Oct. 5 (Fri.) 09:00~10:00 Poster Session 2
- 20 -
Test and Analysis of Machine Tools
Friction and wear characteristics of WCbased coatings of HVOF thermal spray applied on stainless steel
Hyun-Min Song*, Chang-ho Jung, Byung-joo Choi, Chae-eun Lee, Soo-hun Lee, Min-sung Hong,
Moon G. Lee, Yong-Ho Jeon(Ajou University)
Surface roughness simulation using flexible multibody dynamic analysis for a 3axis milling machine
Byung-Sub Kim*, Sungcheul Lee, Chan Hong Lee(Korea Institute of Machinery & Materials)
Hardwareintheloop simulation for estimating the performance of motion controller
Namhyun Kim*, Hyunjung Kim, Wonkyun Lee(Chungnam National University)
Ultra-precision Nanomachining
Machining characteristics of IZO thin films with magnetic flux density variation in magnetic abrasive polishing
Hyo-Jeong Kim*, Hee-Hwan Lee, Jeong-Won Son, Seoung-Hwan Lee(Hanyang University)
Surface crack of glass optics in direct machining process : Vibration cutting, Grinding and Polishing
Yeon Hwang*, Young-Bok Kim(Korea Photonics Technology Institute)
Vibration and Control
A nonlinear feedforward control of long-stroke linear motion system with mixed lubrication of preloaded
motion guides
Chang-hoon Seo*, Chae-eun Lee, Byung hun Lee, Chan joong kim, Yong-Ho Jeon(Ajou University),
Hyo-young Kim, Seok-Woo Lee(Korea Institute of Industrial Technology), Moon G. Lee(Ajou University)
Chatter detection in end milling machining using vibration signal processing and convolutional neural networks
Kwang-Hun Jeong*, Yeon-Uk Seong(Hanyang University), Sung-Jun Moon(Hwacheon Machine Tool
Co.,Ltd,), Jun-Hong Park(Hanyang University)
Carbon Convergence
Tensile properties of recycledcarbon fiber reinforced polypropylene composites by injection molding
method
Joon-Hyuk Song*(Korea Institute of Carbon Convergence Technology), Dong-Guen Lee, Ho-Hyung
KooK(Korea Institute of Carbon Convergence TechnolFogy, Jeonju University), Na-Ra Park, Myeong-Han
Yoo, Min-Seok Moon, Won-Tae Kim, Je-Ha Oh(Korea Institute of Carbon Convergence Technology),
Jin-Soo Kim(Jeonju University)
Structural analysis of GFRP insulation boom in tower wagon boom
HoHyeong Guk*, DongGeun Lee(Jeonju University), JoonHyuk Song, MyeongHan Yoo, MinSeok Moon,
JeHa Oh, WonTae Kim, NaRa Park(Korea Institute of Carbon Convergence Technology),
JinSoo Kim(Jeonju University)
- 21 -
Evaluation on crashworthiness of structural member with carbon fiber composites through simulation
Hee-Seong Kim*, Ji-Hoon Kim(Chosun University)
A study on cutting characteristics for changing tool shape in CFRP trimming
Hong-jie Li*, Seoung-Hyeon Yoo, Hyung-Gon Shin(Chonbuk National University)
Design and CAE
Analysis of object recognition techniques for engineering drawings in image format
Eun-seop Yu*, Duhwan Mun(Kyungpook National University)
Optimization algorithm for predicting ride comfort and handling performance of a rearwheeled CTBA
vehicle
Hyunmo Koo*, Jayil Jeong(Kookmin University)
A study on the bonding of different materials for vehicle weight reduction
Gyung-il Lee*, Jae-Yeol Kim(Chosun University), Sang-Heon Lee(HOWON CO., LTD)
Experimental and numerical analysis of screw and die characteristics in the film extrusion process
Jun Ho Mun*, Woojin Kim(Korea Institute of Industrial Technology), See Jo Kim(Andong National Univ.)
The study of displacement measurement through the buckling phenomenon on thin steel sheets
Jung-Dam Cha*(Graduate School of Nambu University), Joo-Sang Lee(Nambu University)
Development of customized biathlon eyeshades combining 3D scanning and 3D printing
Bona Goo*, Jae-Eun Kim, Yeonsu Ha, Keun Park(Seoul National University of Science and Technology)
Simulation of tensile behavior soft robot using MLPG
Kyeong-Hwan Kim*, Seung-Hyun Shin, Seog-Young Han(Hanyang University)
Control uniformity of plasma on target of DC magnetron sputter based on magnetic field simulation
Se-Hwan Jang*, Sun Joo Park, Kyong-Hyong Kim(Yonsei University), Kwan-Yong Lee
(Samsung Display Corporation), Young-Joo Kim(Yonsei University)\
Green Manufacturing System
Fabrication of workpiece customized electrode tool for electrochemical polishing
Uk-Su Kim*, Jeong-Woo Park(Chosun University)
Implementation of laserbased multisurface textures for improving surface properties
SeJoo Koo, Hong Seok Kim*(Seoul National University of Science and Technology)
Transfer of microscale square pattern using laser induced plasma
Dae Cheol Choi(Graduate School of Seoul National University of Science and Technology),
Hong Seok Kim*(Seoul National University of Science and Technology)
- 22 -
Myeongdong
Myeong-dong is one of the primary shopping districts
in Seoul. The two main streets meet in the center of
the block with one beginning from Myeong-dong
Subway Station (Seoul Subway Line No. 4) and the
other from Lotte Department Store at Euljiro. Many
brand name shops and department stores line the
streets and alleys. Common products for sale include
clothes, shoes, and accessories. Unlike Namdaemun or
Dongdaemun, many designer brands are sold in
Myeong-dong. In addition, several major department
stores have branches here, including Lotte Department
Store, Shinsegae Department Store, Myeong-dong
Migliore, Noon Square and M Plaza. The department
stores carry many premium labels and other fashionable
goods at reasonable prices.
Myeong-dong also has family restaurants, fast food,
plus Korean, Western and Japanese dining options.
Many restaurants in Myeong-dong specialize in
dongaseu (pork cutlet) and kalguksu (noodle soup).
Other businesses in the area include hair salons,
banks and theaters.
Namsan Seoul Tower
Namsan Seoul Tower was the first tower-type tourism
spot in Korea. The top of the tower is at almost
480 m above sea level, including Namsan Mountain
(243 m) and the tower’s own height (236.7 m), making
it one of the tallest towers in the Orient. It is
comprised of Seoul Tower Plaza, recently opened to
public access after 40 years, and N Seoul Tower,
operated by CJ Foodville since 2005. The tower was
first established as a broadcast tower to send out TV
and radio signals in 1969. As of now, it has become
one of the representative landmarks and multi-cultural
venues in Seoul.
Travel information
- 23 -
Itaewon
World Food Street, Hamilton Hotel, Art Museum,
nightclubs, Antique Furniture Street, etc. Itaewon was
the first special tourist zone in Seoul, designated in
1997. It is a multicultural place where over 20,000
foreigners live and is widely recognized by international
visitors. Travelers can taste authentic cuisine and
experience culture from around the globe on the
World Food Street where there are 40 restaurants
operated by foreigners. Since the late 1990s, an
increase in the number of tourists from Southeast
Asia and the Middle East has transformed the streets
from being US Army-oriented into culturally diverse.
Varied performance and events are held in the area.
In particulary, Itaewon Global Village Festival, held
every October, is a famous festival. Tourists can pay
in US dollars, Japanese Yen or another currency
freely. In addition, visitors can use various languages
like English, Japanese, and Chinese with the sellers.
Demilitarized Zone (DMZ)
The Korean peninsula is home to a single nation of
people with the same language and ethnicity, divided
into two countries. The Demilitarized Zone (DMZ) is a
buffer zone, which was established on July 27, 1953
when the Armistice Agreement was signed during the
Korean War. The DMZ vividly captures the scars and
wounds of the Korean War as well as the wishes and
hopes for the future. South and North Koreas drew a
truce line across the Korean Peninsula, from the
mouth of the Imjingang River in the east, to the
town of Goseong in the west. On either side of the
truce line is a 2km-wide stretch of land where
military activity is forbidden. The zone has been
protected from human disturbance for about 6
decades and has unintentionally become a haven for
wildlife.
- 24 -
Millennium Seoul Hilton
Address 52, Sowolro, Junggu, Seoul
Phone Number 027537788
Homepage KRW 242,000
Price http://hilton.co.kr/hotel/seoul/millennium-seoul-hilton
Four Points by Sheraton Seoul, Namsan
Address 366, Hangangdaero, Yongsangu, Seoul
Phone Number 0260707000
Homepage KRW 160,000
Price http://www.fourpointsseoulnamsan.com/
Grand Ambassador Seoul associated with Pullman
Address 287, Donghoro, Junggu, Seoul
Phone Number 0222751101
Homepage KRW 160,000
Price www.ambatel.com/grand/seoul/ko/main.do/
Tmark Grand Hotel Myeongdong
Address 52, Toegyero, Junggu, Seoul
Phone Number 0222833000
Homepage KRW 130,000
Price http://tmarkgrandhotel.com/
Shilla Stay Gwanghwamun
Address 71, Sambongro, Jongnogu, Seoul
Phone Number 0222300700
Homepage KRW 150,000
Price http://www.shillastay.com/gwanghwamun/index.do/
Accommodations
2(Tue.)~5(Fri.) October 2018Millennium Seoul Hilton Hotel, Korea
The 7th International Conference of Manufacturing Technology Engineers 2018
www.icmte.org
Topics and Scope- Advanced Machine Tools- Robots and Automation- IT/BT Fusion Systems- Applied Optical Energy- Ultra-precision Nanomachining- Smart Manufacturing and Smart Factory
- Green Energy Application- Printable Electronics- Medical System- Tool and Die- Nano/Micro System- Etc.
- Design and CAE- Vibration and Control- Green Manufacturing System- Carbon Convergence- Ocean Plant Manufacturing Technologies
- Integrated Manufacturing System- Test and Analysis of Machine Tools- Polymer Processing- Smart Machine Tool- NDE Monitoring for Parts
www.imcc1983.org
Chinese Production Engineering Institute, CMES(CPEI)