August 13, 2015 RotoSize: Version 4.40 29 JAN 2002 Job Reference Information : Job Number : Job Reference : End User : Packager : Driver/Model : Sizing Input Information : Ambient Temp : 100 F Location Elevation : 0 Gas Type Selection : Air Relative Humidity : 100 Specific Gravity : 1.00 k-value Cp/Cv : 1.4 Suction gage pressure : 0 PSI Inlet Gas Temp : 100 F Discharge gage pressure : 120 PSI Design Flow Rate : 0.27 MMSCFD Conditions used in sizing/rating the unit: Suction PSIA 14.70 Discharge PSIA 134.70 Location Atmospheric Pressure 14.70 Moisture Factor Multiplier 1.070 Selected Frame : Frame Selection : SSHG99B (5.17 VI) Design Rpm : 1800.0 Min Rpm : 863 Max Rpm : 3777 Max Suction Pressure, PSIG 50 Max Power allowed, BHP 90 Driver type selection : Electric (60 Hz) Unit is equipped with a Turn Valve, set at 88 %. Rating/Sizing Results: ( Note: This is a Flange-to-Flange Rating Discharge Temp, Degrees F 198 Oil Inlet Temp, Degrees F 180 Temperature RISE, Degrees Fahrenheit 18 REQUIRED Flow in INLET Cu Ft per Min. 216.0 RATED Flow in ICFM at op. RPM 216.0 Volumetric Efficiency at op. RPM 79.45 Adiabatic Efficiency at op. RPM 72.61 REQUIRED Flow in Millions of SCF/Day 0.270 RATED Flow in Millions of SCF/Day 0.270 MMSCFD RATED Flow in SCFM 187.5 RATED FLOW, lb/min 14.94 RATED BHP at operating point 52.6 BHP OIL FLOW CALCULATED, Gal/Min 31.4 OIL Cooler Heat Load, MMBTU/Hr 0.148 Internal Vol. Ratio ("VI") 5.17 Internal Comp. Ratio 9.97 Job Compression Ratio 9.16 NOTE! This unit has a frame-mounted oil pump but the oil flow around the pump in the BYPASS is GREATER than the pump rate. The BYPASS flow is the oil flow rate used above. No warnings detected due to compressor operating conditions. The "Use Compressibility" option is: ON, Zs = 1.000, and Zd = 0.999.

August 13, 2015 Oil Separator Design Report: Standard Separator Size : 600_T Separator Sizing Basis Information : Suction Pressure : 0.0 Discharge Pressure : 120.0 RPM : 1800.0 Oil GPM = 31.37 at 50.833 #/FT3 MMSCF/D = 0.27 at 0.5531 #/FT3 Horizontal Vessel Min. Dimensions: I.D.(Min.) = 20.000 and O.A. Length = 60.00 IN. Current Oil Selection : AEON-9000-SP