Technical Application Guide for UP SHINE LED Downlight...CL102 LED recessed downlight adopts super...
Transcript of Technical Application Guide for UP SHINE LED Downlight...CL102 LED recessed downlight adopts super...
Technical ApplicationGuide for UP-SHINELED DownlightUP-CL102A-2.5-8W
CL102 LED recessed downlight adopts super slim and compact design, perfectly suitable for the narrow ceiling installation. IP65 rating front cover design, suitable for damp environment. Traditional diamond plaited surface lens design ensures the high light transmittance and uniform lighting output. T-shape heat sink greatly increases the radiation area and improves cooling efficiency. The fitting could be rotated from 0 to 30 degree in horizontal direction, which can expand the illumination area.
• Up to 70% energy saving compared to standard CFL
• Long lifetime of 40,000 hours • Triac dim, 0-10V dim, DALI dim• 36°/60° wide beam angle• Ø68-72mm cutout• CCT: 2700K 3000K 4000K 5000K• No UV/IR light• Environment friendly, without Mercury or any
other hazardous substances
Application notes• Professional electrician for installation only • Switch off before installation• Do not touch when in use• Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
Introduction
www.upshine.com [email protected]
30°
SAA
Product Information
Technical SpecificationsModel Voltage Power Power
FactorLumen(±5%)
Beamangle CCT Lifespan CRI Dimmable Dimension
UP-CL102A-2.5-8W AC230V 8W ≥0.9 700 36°/60° 2700K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 735 36°/60° 3000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 815 36°/60° 4000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 800 36°/60° 5000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 695 36°/60° 2700K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 720 36°/60° 3000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 805 36°/60° 4000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 780 36°/60° 5000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 535 36°/60° 2700K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 570 36°/60° 3000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 620 36°/60° 4000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W AC230V 8W ≥0.9 590 36°/60° 5000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 530 36°/60° 2700K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 560 36°/60° 3000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 620 36°/60° 4000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
UP-CL102A-2.5-8W-D AC230V 8W ≥0.9 575 36°/60° 5000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
www.upshine.com [email protected]
Driver data Sheet
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
8W Ⅱ IP65 -20oC~45oC 0~90% -20oC~65oC
Driver data DIM Non dim
Input rated Voltage AC230V AC230V
Frequency 50Hz 50Hz
Input Voltage AC200-240V AC200-240V
Efficiency ≥78% ≥78%
Total load Wattage 8W±0.5W 8W±0.5W
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.045A ≤0.06A
Full load output Voltage DC28-38V DC28-40V
Rated output current 180mA 185mA
Output current range 180mA±5% 185mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
THD ≤20% –
Withstand voltage AC3750V AC3750V
Ø80
30
66
Photometric Diagram
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 38.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 38.34deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 360.2 lm
5000K
Polar intensity diagram Cartesian intensity diagram Beam diagram
Height Eavg, Emax Angle: 37.01deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 379.1 lm
UNIT: cdAVERAGE BEAM ANGLE(50%): 37.5 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 37.7 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 37.34deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 362.2 lm
Polar intensity diagram Cartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 38.2 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Beam diagram
Height Eavg, Emax Angle: 38.33deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 408.3 lm
Spectral Distribution
2700K
380 500 600 700 800Wavelength(nm)
Max=5363 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0380 500 600 700 800
Wavelength(nm)
Max=5374 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800Wavelength(nm)
Max=5466 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0380 500 600 700 800
Wavelength(nm)
Max=5997 [1.0=20000]Sp
ectr
um0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
3000K
4000K 5000K
2.58 SDCM F3000K
x=0.4427 y=0.4091
5.57 SDCM F2700K
x=0.4667 y=0.4126
www.upshine.com [email protected]
3.63 SDCM F4000K
x=0.3941 y=0.3899
5.81 SDCM F5000K
x=0.3568 y=0.3700
2700K
4000K
80
70
60
50
40
30
20
10
0
18:3
7:46
19:0
7:44
19:3
7:44
20:0
7:44
20:3
7:44
21:0
7:44
21:3
7:44
22:0
7:44
23:0
7:44
23:3
7:44
0:07
:44
0:37
:44
1:07
:44
1:37
:44
2:07
:44
2:37
:44
3:07
:44
3:37
:44
4:07
:44
4:37
:44
5:07
:44
5:37
:44
6:07
:44
6:37
:44
7:07
:44
7:37
:44
8:07
:44
8:37
:44
9:07
:44
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 37.5DEG
400
800
1200
1600
2000
0O
-/+180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
UNIT: cd
C0/180, 37.7 deg
C30/210, 37.6 deg
C60/240, 37.5 deg
C90/270, 37.4 deg
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
Packaging Information
www.upshine.com [email protected] Phone: +86 755 2919 7332Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
Installation
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 50mm
1. Open a hole according to the cutout size of led downlight.
2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back.
3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole.
4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1).
CPower supply
A B
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 52.5*52.5*15 0.24 15 50
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 660 33000 28
40'' standardcontainer 1320 66000 56