Technical Application Guide for UP SHINE LED Downlight...DL104 LED recessed downlight adopts super...

Technical ApplicationGuide for UP-SHINELED DownlightUP-DL104A-2.5-5W

DL104 LED recessed downlight adopts super slim and compact design, perfectly suitable for the narrow ceiling installation. IP65 rating front cover design, suitable for damp environment. Traditional diamond plaited surface lens design ensures the high light transmittance and uniform lighting output. T-shape heat sink greatly increases the radiation area and improves cooling efficiency.

• Up to 70% energy saving compared to standard CFL

• Long lifetime of 40,000 hours • Triac dim, 0-10V dim, DALI dim• 36°/60° wide beam angle• Ø68-72mm cutout• CCT: 2700K 3000K 4000K 5000K• No UV/IR light• Environment friendly, without Mercury or any

other hazardous substances

Application notes• Professional electrician for installation only • Switch off before installation• Do not touch when in use• Keep away from hot steam and corrosive gas

Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.

Certificate

Introduction

www.upshine.com [email protected]

SAA

Product Information

Technical SpecificationsModel Voltage Power Power

FactorLumen(±5%)

Beamangle CCT Lifespan CRI Dimmable Dimension

UP-DL104A-2.5-5W AC230V 5W ≥0.9 465 36°/60° 2700K 40000h ≥80 No 80*80*40mm cutout Ø68-72mm




UP-DL104A-2.5-5W-D AC230V 5W ≥0.9 460 36°/60° 2700K 40000h ≥80 Yes 80*80*40mm cutout Ø68-72mm













Driver data Sheet

Fixture CompatibilityRated

WattageElectrical

ClassificationIngress

Protection Operating

TempOperatingHumidity

Storage Temp

5W Ⅱ IP65 -20oC~45oC 0~90% -20oC~65oC

Driver data DIM Non dim

Input rated Voltage AC230V AC230V

Frequency 50Hz 50/60Hz

Input Voltage AC200-240V AC200-240V

Efficiency ≥78% ≥78%

Total load Wattage 5W±0.5W 5W±0.5W

Power Factor ≥0.9 ≥0.9

Rated input current ≤0.028A ≤0.028A

Full load output Voltage DC28-38V DC25-42V

Rated output current 130mA 130mA

Output current range 130mA±5% 130mA±5%

Power tolerance ±5% ±5%

Current output tolerance ±5% ±5%

Dimming range 8%-100% —

Dimmer Triac dimmers —

Short circuit protection PASS PASS

Over voltage protection PASS PASS

Over temperature protection PASS PASS

THD ≤20% ≤18%

Withstand voltage AC3750V AC3750V

80

80

40

Ø67

Photometric Diagram

Polar intensity diagram Beam diagramCartesian intensity diagram

UNIT: cdAVERAGE BEAM ANGLE(50%): 38.2 DEG

-/+180

-120

-90

-30

120

90

30

0

300

600

900

1200

1500

0

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)15.0

13.5

12.0

10.5

9.0

7.5

6.0

4.5

3.0

1.5

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 38.01deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 273.9 lm

5000K

Polar intensity diagram Cartesian intensity diagram Beam diagram

Height Eavg, Emax Angle: 37.35deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 255.0 lm


-/+180

-120

-90

-30

120

90

30

0

300

600

900

1200

1500

0


Distance(m)

MH=10mE(LX)15.0

13.5

12.0

10.5

9.0

7.5

6.0

4.5

3.0

1.5

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25

3000K

Polar intensity diagram Beam diagramCartesian intensity diagram


-/+180

-120

-90

-30

120

90

30

0

200

400

600

800

1000

0


Distance(m)

MH=10mE(LX)10

9

8

7

6

5

4

3

2

1

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 37.63deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 239.5 lm

Polar intensity diagram Cartesian intensity diagram


-/+180

-120

-90

-30

120

90

30

0

300

600

900

1200

1500

0


Distance(m)

MH=10mE(LX)15.0

13.5

12.0

10.5

9.0

7.5

6.0

4.5

3.0

1.5

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25

Beam diagram

Height Eavg, Emax Angle: 38.08deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 311.0 lm

Spectral Distribution

2700K

380 500 600 700 800Wavelength(nm)

Max=3884 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0380 500 600 700 800

Wavelength(nm)

Max=3864 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

380 500 600 700 800Wavelength(nm)

Max=4036 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0380 500 600 700 800

Wavelength(nm)

Max=4604 [1.0=20000]Sp

ectr

um0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

3000K

4000K 5000K

2.28 SDCM F3000K

x=0.4409 y=0.4079

4.93 SDCM F2700K

x=0.4665 y=0.4137


3.64 SDCM F4000K

x=0.3942 y=0.3907

2.18 SDCM F5000K

x=0.3575 y=0.3721

2700K

4000K

80

70

60

50

40

30

20

10

0

18:3

7:46

19:0

7:44

19:3

7:44

20:0

7:44

20:3

7:44

21:0

7:44

21:3

7:44

22:0

7:44

23:0

7:44

23:3

7:44

0:07

:44

0:37

:44

1:07

:44

1:37

:44

2:07

:44

2:37

:44

3:07

:44

3:37

:44

4:07

:44

4:37

:44

5:07

:44

5:37

:44

6:07

:44

6:37

:44

7:07

:44

7:37

:44

8:07

:44

8:37

:44

9:07

:44

IC

Capacitor

MOS

PCB

LED

Fitting

Environmental temperature

Tem

pera

ture

(o C)

Time

The driver lifespan is based on capacitor working temperature.

Driver lifetime & LED light decay rate

90000

80000

70000

60000

50000

40000

30000

20000

10000

065oC 75oC 85oC 95oC 105oC

Life

time

(hou

rs)

Capacitor Tc (oC)

Driver Lifetime

% L

umin

ous

Flux

FLUX

△ U'V'

110%

105%

100%

95%

90%

85%

80%

75%

70%

0.0040

0.0035

0.0030

0.0025

0.0020

0.0015

0.0010

0.0005

0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

LifeTime (hours)

Polar Diagram Comparison

AVERAGE BEAM ANGLE (50%): 37.6DEG

300

600

900

1200

1500

0O

-/+180O

150O-150O

120O-120O

90O-90O

60O-60O

30O-30O

UNIT: cd

C0/180, 37.9 deg

C30/210, 37.6 deg

C60/240, 37.4 deg

C90/270, 37.3 deg

0

LED Light Decay Rate

Temperature● The testing is operated at 25°C

● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C

● The highest withstand temperature of IC, MOS could be 120°C

● The highest withstand temperature of LED junction temperature is 150°C


Packaging Information

www.upshine.com [email protected] Phone: +86 755 2919 7332Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China

Installation

Install requirements

A-gap above the fitting 25mm

B-gap to the building material 25mm

C-gap to the thermal insulation 50mm

1. Open a hole according to the cutout size of led downlight.

2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back.

3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole.

4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1).

CPower supply

A B

SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)

Carton 52.5*52.5*15 0.22 14.4 50

CTNS Q'TY(PCS) VOLUME(CBM)

20'' standardcontainer 660 33000 28

40'' standardcontainer 1320 66000 56

Technical Application Guide for UP SHINE LED Downlight...DL104 LED recessed downlight adopts super...

Documents

Transcript of Technical Application Guide for UP SHINE LED Downlight...DL104 LED recessed downlight adopts super...