SVELTA EVO - Support bracket for wall hung wc and bidet · SVELTA EVO - Support bracket for wall...
Transcript of SVELTA EVO - Support bracket for wall hung wc and bidet · SVELTA EVO - Support bracket for wall...
PR
OD
UC
T D
ATA
SH
EE
TSANITARY FIXINGS
PR
OD
UC
T D
ATA
SH
EE
T
SVELTA EVO - Support bracket for wall hung wc and bidet
180C
B
AG
230
D
H
E
I
F
APPLICATION
Wall hung wc and bidet fastening on masonry.
FEATURES AND BENEFITS
The connecting system with crossbeams makes installation particularly fast and solid.Fast adjustment of the center-to-center distance between 180 mm and 230 mm thanks to the holes on the crossbeams. It is designed to bear a load of 400 kg, according to the UNI EN 997 and UNI 14528 regulations for wall hung wc and bidet.Its height of 660 mm makes it particularly suitable to be installed on radiant heating floors.Upper crossbeam provided with side bendings to set the bracket into the wall in an easier way.Side holes on the metal struts to fix water supply pipes (bidet installation).Complete with finishing caps for the best aesthetic result.
COD TIPE A B C D E F G H I
020533 SVELTA EVO 180 Preassembled bracket at 180mm 660 160 39 380 29 10,5 M12x180 273 29
020537 SVELTA EVO Preassembled bracket in box 660 160 39 380 29 10,5 M12x180 273 29
C O M P LI AN
T400kg
UNI E
N 9
97
- UNI EN 14528
>
>
>
>
>
>
>
WALL HUNG WC AND BIDET FASTENINGSANITARY FIXING
PR
OD
UC
T D
ATA
SH
EE
T
PR
OD
UC
T D
ATA
SH
EE
T
DATE 03-2020 REV. 00The current technical data sheet substitutes and cancels the previous ones. Information correspond with our current knowledge of the product. It cannot lead us to any sort of responsibility or compensation. Gia S.p.A. reserves the right of changing techical features and molds without notice.
Gia S.p.A. – Via Sac. A. Cremona, 12 – 28069 Trecate (NO) – www.gia.it
SANITARY FIXINGS
PR
OD
UC
T D
ATA
SH
EE
T
PR
OD
UC
T D
ATA
SH
EE
T
INSTALLATION
In order to install the product properly, please follow the instructions included in the package.
PACKAGING
Preassembled in cardboard box | 5 items / box - cod. 020533In cardboard box | 1 item / box - cod. 020537
RELATED ITEMS
> CAP - Caps> PO - Spare brass extension kit> CLIPPO ½” - Insultated pipe clamp
Steel DX51 D Z200 EN 10142 with sendzimir zinc plating
BRACKET
Steel 4.8 EN ISO 898.1 with electro zinc plating 7-8 μm
PA6 White nylon
PE Polyethylene
COMPONENTS
WASHERS
CAPS
MATERIALS TECHNICAL DATA
Masonry
BASE MATERIAL
INSTALLATION TOOLS AND RECOMMENDATIONS
In order to make it more solid, we suggest to fix the bracket to the ground by using the pre-settled holes on the lower crossbeam.
Composed of:- perforated and zinc plated metal struts, 660 mm high- zinc plated crossbeams- M12 rods with red covers- support nuts and washers - white nylon washers- finishing caps and washers
WALL HUNG WC AND BIDET FASTENING