Turn

ing Your Assets into Dollars

Public AuctionSURPLUS

EQUIPMENTEVERYTHING

MUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.7370 Fax 704.821.4325 www.asset-sales.com info@asset-sales.co

European HeadquartersP.O. Box 819, Halifax HX1 9QQ UK

Tel / Fax 07836.347880peteram@asset-sales.co.uk

Asset Sales (Canada) Inc.4310 Prospect Road

Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325

gmuller@asset-sales.com

EQUIPMENT SURPLUS TO THE ONGOING NEEDS OF

TEREX OKC PLANTLATE MODEL FABRICATING, MACHINE TOOLS & BORING MILLS

9528 W I-40 SERVICE ROAD - OKLAHOMA CITY, OK 73128TUESDAY, JUNE 3RD @ 9:00 A.M. CDT

Inspection: MONDAY, JUNE 2ND, From 8:00 A.M. - 4:00 P.M. CDT

(1 OF 4 BORING MILLS) GIDDINGS & LEWIS PC50 5" CNC TABLE TYPE HORIZONTAL BORING MILL

(1 OF 4) ALLTRA PG14-14 HIGH DEFINITION PLASMA BURNING MACHINE

(1 OF 3 LATHES) TACCHI HBD 47" SWING X 236" CNC FLAT BED LATHE

(1 OF 3 PRESS BRAKES) 950 TON X 24' PULLMAX OPTIMA 800 CNC HYDRAULIC PRESS BRAKE

CNC

2007 950TON

CNC

MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 2ND FROM 8:00 A.M. - 4:00 P.M. CDT

2

HYDRAULIC STRAIGHTENING PRESS & BULLDOZERTRAVELING TROLLEY Hydraulic Straightening Press with (2) 170 Ton Traveling Trolley Straightening Cylinders, 2-Axis Positioning, Controls for North – South – East – West, 6’ x 12’ Table & Between Uprights, Hydraulics

CMI Horizontal Hydraulic Bending Bulldozer with 26 Hole Positions for Die Braces, Pendant Control

CNC TUBE BENDERCRIPPA Model Basic 2 3-Axis CNC Hydraulic Tube Bender with 42mm Diameter Tube Capacity, Large Assortment of Bending Dies, Mandrels & Tooling, DEC CNC Controls, sn:9556-91.207.1-916, mfg.1992

Assorted 1-1/2” Hydraulic Tube Bender

CNC PLASMA BURNING MACHINESALLTRA Model PG14-14 High Definition Plasma Burning Machine with 12’ W x 42’ L Travels & Zoned Downdraft Table, (1) High Definition Plasma Torch, (2) Oxy-Acetylene Burning Torches, AC Brushless Servo System with Dual Lower Axis Rack & Pinion Drives, Hyperformance HPR 260 Plasma Power Source & Burny 10 LCD Plus CNC Controls, sn:5371, mfg.2007

TORIT DONALDSON Model DF03-24 Dust Collector System, sn:2232544-1, mfg.Installed 2010

MG Model TMC 3610 CNC Plasma Burning Machine with 9’ x 80’ Over All Travels, (2) 9’ x 40” Water Tables, Plasma Burning Torch, (3) Oxy-Chemtane Torch, Hypertherm Plasma HT200 Power Source, sn:2000-001430 & Burny 10 LCD Plus CNC Controls, sn:TMC310P-95-30

TRAVELING TROLLEY HYDRAULIC STRAIGHTENING PRESS

1-1/2" HYDRAULIC TUBING BENDER

CMI HORIZONTAL HYDRAULIC BENDING BULLDOZER

CRIPPA BASIC 2 3-AXIS CNC HYDRAULIC TUBE BENDER

Want to Sell Your Shop or Know Someone Who

Does? Call Us Toll Free at

(888) 800-4442! We Pay Great Finder’s Fees!

ALLTRA PG14-14 HIGH DEFINITION PLASMA BURNING MACHINE

MG TMC 3610 CNC PLASMA BURNING MACHINE

ATTENDING THE AUCTION IN PERSON?What you need to bring.....

• Your Driver’s License• Business Card

• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying via Company Check

2007

HIDEF.

AUCTION SALE DATE & TIME – TUESDAY, JUNE 3RD @ 9:00 A.M. CDT

3

<TORIT DONALDSON DF03-24 DUST COLLECTOR SYSTEM

WHITNEY 661 ATC 60 TON COMBINATION CNC PLASMA BURNING / PUNCH

Can’t Attend the Sale? Still Want to Bid? Visit Our Website at

www.asset-sales.com For More Bidding Options.

Check Out Our Upcoming Auction Calendar!

You Can Also Sign Up to Receive Email Notifications by Joining Our Mailing List!

CNC COMBINATION PLASMA PUNCHES, TURRET PUNCHWHITNEY Model 661 ATC 60 Ton Combination CNC Plasma Burning / Punch, Model 665-600 with Approximately 8’ x 25’ Roller Ball Tables, 96” Y-Axis Travel, 45 Position Punch Automatic Tool Changer, Hypertherm HT2000 Plasma Power Source, Fanuc 16-P CNC Control, sn:43139, mfg.1998

WHITNEY Model 3500 ATC 40 Ton Combination CNC Plasma Burning / Punch, Model 631-200 with Approximately 49” x 90” Roller Ball Tables, 60” Y-Axis Travel, 30 Position Punch Automatic Tool Changer, Scrap Conveyor Hypertherm HT2000 Plasma Power Source, Fanuc 00-P CNC Control, sn:631-200-42132

WIEDEMANN Model W-4560 45 Ton Capacity CNC Turret Press with 36 Station Turret, 56” x 144” Roller Ball Work Table, 62” x 74” Travels, Scrap Conveyor, Fanuc O-P CNC Control, sn:W4-479

LASERMAZAK Model Super Turbo X510 2000 Watt CNC Laser Burning Machine with 5’ x 10’ Capacity, MAZAK L32 CNC Control, sn:100734

>WHITNEY 3500

ATC 40 TON COMBINATION CNC PLASMA BURNING /

PUNCH

<WIEDEMANN W-4560 45 TON CAPACITY CNC TURRET PRESS

>MAZAK SUPER TURBO

X510 2000 WATT CNC LASER BURNING

MACHINE

2010

60TON

MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 2ND FROM 8:00 A.M. - 4:00 P.M. CDT

4

950 TON X 24' PULLMAX OPTIMA 800 7.3/6.2 5-AXIS CNC HYDRAULIC PRESS BRAKE

600 TON X 16' STANDARD AB600-16 HYDRAULIC PRESS BRAKE

220 TON X 13' AMADA HFB 220/40 CNC HYDRAULIC PRESS BRAKE

10' (118") X 12MM AMADA GPN1230 CNC HYDRAULIC PLATE SHEAR

HMI PJP 170-25 170 TON SINGLE END HYDRAULIC PUNCH

10' X 3/8" HTC 375-1A0A HYDRAULIC PLATE SHEAR

AMADA (FIM) VERSA-206-E 15MM VARIABLE ANGLE CORNER NOTCHER

PRESS BRAKES950 Ton x 24’ PULLMAX Model Optima 800 7.3/6.2 5-Axis CNC Hydraulic Press Brake (Machine was Upgraded by Pullmax from 875 to 950 Ton 2004) with 20’ Distance Between Housings, Crowning, 5-Axis Cybelec Model EVA 10S CNC Pendant Controls & Backgauge, Safety Light Curtains & Remote Foot Actuator, sn:4626, mfg.1996

600 Ton x 16’ STANDARD Model AB600-16 Hydraulic Press Brake with 174” Distance Between Housings, Autogauge 1000 CNC Control & Single Axis Backgauge, Safety Light Curtains, Remote Foot Actuator & Palm Button Stand, sn:798715

220 Ton x 13’ AMADA Model HFB 220/40 CNC Hydraulic Press Brake with 148” Distance Between Housings, 3+ Axis Delem DA58 CNC Control & Backgauge, (21) Die Clamps, sn:H20220, mfg.1992

SINGLE END PUNCH, NOTCHER & SHEARSHMI Model PJP 170-25 170 Ton Single End Hydraulic Punch with 25” Throat Depth, Punches & Dies & Remote Foot Actuator, sn:102-47-136

10’ (118”) x 12MM AMADA Model GPN1230 CNC Hydraulic Plate Shear with 118” Actual Length and Capacity to .472” MS, .314” SS, CNC Programmable Backgauge & Control, Finger Guard & Remote Foot Actuator, sn:C61009, mfg.1996

10’ x 3/8 ” HTC Model 375-1A0A Hydraulic Plate Shear with Front Operated Power Backgauge, Finger Guard, Left Hand Squaring Arm & Remote Foot Actuator, sn:A573665

AMADA (FIM) Model Versa-206-E 15MM Variable Angle Corner Notcher with 8” x 8” Notching Blades, sn:26011www.asset-sales.com

950TON

AUCTION SALE DATE & TIME – TUESDAY, JUNE 3RD @ 9:00 A.M. CDT

5

<HEM V200M 25" X 36" PROGRAMMABLE TILT FRAME VERTICAL BANDSAW

MARVEL SERIES 8 18" X 18" TILT FRAME VERTICAL BANDSAW

DOALL 1612-0 16" VERTICAL BANDSAW

LARGE

www.asset-sales.com

VERTICAL & HORIZONTAL BANDSAWSHEM Model V200M 25” x 36” Capacity @ 90° / 25” x 25” @ 45° Programmable Tilt Frame Vertical Bandsaw with 2” Wide Blade, Automatic Material Feed & Powered Conveyors Auto Tilt & Infeed, Vises, Coolant & Operators Pendant Controls, sn:605098, mfg.1998

MARVEL Series 8 18” x 18” Tilt Frame Vertical Bandsaw with Manual Infeed, Tilt, Controls & Infeed Conveyor, sn:821511-W

DOALL Model 1612-0 16” Vertical Bandsaw with Worktable, Butt Welder & Grinder, sn:277-70682

DOALL Model C-1216A 16” x 16” Automatic Horizontal Bandsaw with Multi-Index, Auto Material Feed, Dual Vises, Controls & Conveyors, sn:37378208

KALTENBACH Model KKS 400 Mitre Cutting Coldsaw with Capacity to 5.1” Rounds, Overhead Vise, 15.75” Blade Diameter, Mitering Table & Controls, sn:54952

STRAIGHTSIDE HYDRAULIC PRESSPACIFIC Model 500M 48-48 500 Ton Hydraulic Straightside Press with 48” x 48” T-Slotted Ram & Bolster, 18” Shut Height, 38” Open, Controls & Remote Foot Actuator, sn:8564

Assortment of Die Shoes & Rack

KALTENBACH KKS400 MITRE CUTTING COLDSAW

>PACIFIC 500M 48-48 500 TON

HYDRAULIC STRAIGHTSIDE

PRESS

DOALL C-1216A 16" X 16" AUTOMATIC HORIZONTAL BANDSAW

CAP.

MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 2ND FROM 8:00 A.M. - 4:00 P.M. CDT

6

CNC HORIZONTAL BORING MILLS(2) GIDDINGS & LEWIS Model MC60 6” CNC Table Type Horizontal Boring Mills with (2) 48” x 72” Pallet Tables, Table Rotates 360,000° (B-Axis), 96” Vertical Travel, 90” Above Pallets, 120” Cross, 48” Longitudinal, #50 Taper Spindle Speeds to 2500 RPM, Thru Spindle Coolant, 40 Position ATC, G&L 8000 CNC Pendant Controls, sn:450-370 & 450-369-98, mfg.1998

GIDDINGS & LEWIS Model PC50 5” CNC Table Type Horizontal Boring Mill with 48” x 122” Table, 84” Vertical Travel, 120” Cross, 58” Longitudinal, #50 Taper Spindle, 40 Position ATC, G&L CNC Pendant Controls, sn:50-1563-78

GIDDINGS & LEWIS Model G50T 5” CNC Table Type Horizontal Boring Mill with 48” x 98” Table, 48” Vertical Travel, 96” Cross, 58” Longitudinal, #50 Taper Spindle Speeds to 1120 RPM, 40 Position ATC, G&L CNC Pendant Controls, sn:450-1059

BORING MILL SUPPORTG&L 48” x 72” Airlift Rotary Table with Lever Controls

G&L 48” x 48” Airlift Rotary Table with Lever Controls

Other 36” & Assorted Size Airlift Rotary Tables, T-Slot Angle Plates, #50 Taper Toolholders & Cabinets, Davis Tools, Etc…

GIDDINGS & LEWIS MC60 6" CNC TABLE TYPE HORIZONTAL BORING MILLS

GIDDINGS & LEWIS MC60 6" CNC TABLE TYPE HORIZONTAL BORING MILLS

1998

GIDDINGS & LEWIS PC50 5" CNC TABLE TYPE HORIZONTAL BORING MILL

GIDDINGS & LEWIS G50T 5" CNC TABLE TYPE HORIZONTAL BORING MILL

2AVAILABLE

4CNC HBM

AUCTION SALE DATE & TIME – TUESDAY, JUNE 3RD @ 9:00 A.M. CDT

7

(80+) LINCOLN & MILLER MIG WELDERS(80+) LINCOLN & MILLER MIG WELDERS PANDJIRIS WELDING POSITIONER

TACCHI HDB 47" SWING X 236" CNC FLATBED LATHE WITH TURRET AND LIVE TOOLING

WELDING(80+) LINCOLN & MILLER Mig Welders Models DC-600 / 655 / 650PRO / CV400, DELTAWELD 451 & Other Models, Portable with Wire Feeders

LINCOLN Combination Sub-Arc Mig Welding System with Adjustable Manipulator, 2-Axis Welding Head with Flux Hopper & Wire Feed, Model NA-5 Controls with Digital Readouts & LINCOLN Idealarc DC-600 Welder

Portable Plasma Welders: THERMAL ARC Model PAK-5XT, sn:E31140A184702

PANDJIRIS Welding Positioner with 3-Jaw Positioning Chuck, RANSOME Welding Positioner, PRESTON EASTON & Other Assorted Welding Positioners

Other Mig Welders, Stick Welder, Fixed and Portable BERNARD Boom Welders, Dry Rod Ovens, MILLER Filtair Fume Extractors Model MWX-D, Tank Turning Roll with Pendant

CNC LATHESTACCHI Model HDB 47” Swing x 236" CNC Flatbed Lathe with Turret and Live Tooling ‘C’ Axis, 36” Diameter Chuck, Spindle Speeds to 720 RPM, 75HP, 26,000lb Capacity Between Centers (with out Steady Rest) Follow Rest, Power Tailstock, Chip Conveyor & Siemens Pendant CNC Controls, sn:6761, mfg.1995

CINCINNATI Milacron Model 18C CNC Chucker with 19” 3-Jaw Chuck, Main & Crowning Turrets, Retrofit with Acramatic 2100 CNC Controls, & Remote Pulse Generator with Chip Conveyor, sn:5305C18-76-004-RL97

ENGINE LATHESKINGSTON Model HR4000 40” x 12’ Gap Bed Engine Lathe with 19-1/2” 3-Jaw Chuck, 4” Thru-Hole, Inch/ Metric Threading Rapids, Steadies & Chip Guard, sn:048210203, mfg.1995

DAINICHI Model DLG-5HB 24” x 155” Gap Bed Engine Lathe with 18” 3-Jaw Chuck, 3-3/4” Thru-Hole, Speeds to 1600, Threading, Steadies & Chip Guard, sn:16865

CINCINNATI MILACRON 18C CNC CHUCKER

<KINGSTON HR4000 40" X 12' GAP BED ENGINE LATHE

>DANICHI DLG-5HB

24" X 155" GAP BED ENGINE LATHE

80+

MACHINERY INSPECTION DATE & TIME – MONDAY, JUNE 2ND FROM 8:00 A.M. - 4:00 P.M. CDT

8

(2) SHARPE RD-1600 16" X 3-1/2" RADIAL ARM DRILLS

VERTICAL KEYSEATER

OSTER AUTOMATIC PIPE THREADERLARGE ASSORTMENT OF VIDMAR TOOL CABINETS

UNI-TEK TAP DISINTEGRATOR

PARLEC P20-2020 SERIES 2000 PROGRAMMABLE TOOL PRESETTER

LARGE ASSORTMENT OF VIDMAR TOOL CABINETS

CINCINNATI NO.2 TOOL & CUTTER GRINDER

SUNNEN MBB-1699 HONING MACHINE

CINCINNATI SLIDING SPINDLE HEAVY DUTY DRILL PRESS

Want to Join Our Mailing List? Want to be Included in Email Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction?

Want to Request a Brochure or be Removed from our Mailing List? Email Us at advertising@asset-sales.com or Fax a Request to (704) 821-4325!

www.asset-sales.com

1 of 2

RADIAL ARM DRILLS & MISCELLANEOUS MACHINES

(2) SHARPE Model RD-1600 16” x 3-1/2’ Radial Arm Drills with Power Elevation & Clamping, Spindle Speeds to 1920 RPM, T-Slot Base & Box Tables, sn:13781 & 13760

Vertical Keyseater Model HKZ50-450 with 50MM x 450MM Capacity, sn:8872151018

OSTER Automatic Pipe Threader

UNI-TEK Tap Disintegrator

TOOLROOMPARLEC Model P20-2020 Series 2000 Programmable Tool Presetter with Enclosure, Joystick with Controls & Built-In 5 Drawer Tool Cabinet, sn:167275-0698

CINCINNATI No.2 Tool & Cutter Grinder with Assorted Motorized Workhead Attachments, Universal Worktable, Coolant & Worklight, sn:F5394-E-80-04-41

Large Assortment of VIDMAR Tool Cabinets, #50 Taper Storage Cabinets, Carts, Davis Tools, Drills, Endmills, Boring Bars, Taps, Ream-ers, Other Perishable Tooling

MISCELLANEOUS MACHINESCINCINNATI Sliding Spindle Heavy Duty Drill Press with Adjustable T-Slot Worktable, Variable Speeds, Power Spindle Feed, Worklight

CINCINNATI Model 3 Vertical Milling Machine with 15” x 62” Power Feeding Worktable, #50 Taper Spindle Speeds 18 to 450 RPM, sn:3E3006-1

SUMMIT Heavy Duty Drill Press with Adjustable T-Slot Worktable, Power Feed Spindle Speeds to 70 to 1800 RPM, sn:1119

SUNNEN Model MBB-1699 Honing Machine with AG-300 Precision Gage, sn:15341

MISCELLANEOUSHuge Assortment of Jib & Bridge Crane Electric Hoists, Electric Lift Trucks, Steam Jenny, Onan 7.5 Genset, Numerous Pedestal Disc Sanders, 2000 Gallon Storage Tank, Chains, Binders, Clamps, Cabinets, Pedestal Fans, SHARP Packaging System, SIGNODE HB-4300 Box Bander, APEX Disc Sander, DELTA Redial Arm Saw, Jack-Knife Tapper, Hydraulic Hose Clamp, Etc…..

AUCTION SALE DATE & TIME – MONDAY, JUNE 2ND FROM 8:00 A.M. - 4:00 P.M. CDT

9

Asset Sales, Inc. Does Not Pack,

Ship, Crate, Transport

or Rig Items.Buyers May Pick

Up Their Items at the Auction

Location or Can Arrange for a Third

Party Logistics Firm to Manage

the Removal Precess for Them.

Turn

ing Your Assets into Dollars

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales, Inc NC License # 6625Lance Mannion NC License # 6003

TRAVELING TROLLEY HYDRAULIC STRAIGHTENING PRESS

DIRECTIONSFROM WILL ROGERS WORLD AIRPORT: Exit Airport on to S. Meridian Ave for 1.8 miles. Turn left onto SW 29th Street, continue for 5 miles. Turn right onto S. Morgan Rd continue for 1.7 miles. Take a right onto SW 8th St. Plant will be on the right. Plant is approximately 10.1 miles from the airport. Follow the Auction Signs. HOTELSFOUR POINTS BY SHERATON 6300 Terminal Dr Oklahoma City, OK 73159 (405) 681-3500HOMEWOOD SUITES BY HILTON 6920 W Reno Ave Oklahoma City, OK 73127 (405) 789-3600

Do you have a machine or plant for sale?

Call Asset Sales, Inc for aconfidential evaluation.

(888) 800-4442

PUBLIC AUCTIONEQUIPMENT SURPLUS TO THE ONGOING NEEDS OF

TEREX OKC PLANTLATE MODEL FABRICATING, MACHINE TOOLS &

BORING MILLSOKLAHOMA CITY, OK

TUESDAY, JUNE 3RD @ 9:00 A.M. CDT

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.