Machinery Sales, LLC - uen.hsix.comuen.hsix.com/brochure/019548.pdf · THERMADYNE AVIATOR XLT,...
4
CLARK Machinery Sales, LLC 1606 Trebor Ct., Lutherville, MD 21093-4952 Tel: 410-252-5494 Fax: 443-269-0660 Email: [email protected] www.clarkmachinerysales.com CALYPSO HAMMERHEAD 5X10, 2007, 100 CUTTING HOURS, CHIRON DZ15KW, 2005, 2 SPINDLES, 2 PALLETS, ROTARIES ON BOTH, 3200 PSI CHIP BLASTER. EVERY OPTION. [95173] – C-axis, Live Milling – DOOSAN DAEWOO PUMA 400LMB, 18"Chk, 4.62" HOLE, SELF CENTERING STEADY, (2006) [108990] OKUMA MC-4VAE HS, 1993, 30"X, 16"Y, 17"Z, 12,000 RPM, 4TH READY, 12000 RPM - NEW SPINDLE! [98924] 3/4" STAR SR20R I, FANUC 18IT, 2002, LNS 226 EXPRESS, C-AXIS, COMING OUT OF TOP QUALITY SWISS HOUSE. [99036] 118", OM TMS 1-30/70, 118" TABLE, 275" MAX SWING, DRO, PENDANT CONTROL [108989] CALYPSO HAMMERHEAD X10, 2007, 100 CUTTING HOURS 30 HP , 60,000 PSI [67183] 60.1"X, 29"Y, 25.9"Z, OKK VM-7III, 2005, GEARED, 50 TAPER, 6000 RPM [99057] – Very Large Capacity CNC Floor Mill! – 7" WOTAN RAPID 6, SIEMENS 805M, 1978/1990'S, 551" X 188" X 39" + 35", ROTARY [99033] BROTHER TC32B QT, 2006, 21.7"X, 15.7"Y, 16.3"Z, 2-PALLET, 2-NIKKEN ROTARY TABLES, 16,000 RPM, HSK. [99058] See inside for many more great offers! Clark Machinery is pleased to offer the following machines for your consideration
Transcript of Machinery Sales, LLC - uen.hsix.comuen.hsix.com/brochure/019548.pdf · THERMADYNE AVIATOR XLT,...
CLARKMachinery Sales, LLC
1606 Trebor Ct., Lutherville, MD 21093-4952Tel: 410-252-5494 Fax: 443-269-0660Email: [email protected]
www.clarkmachinerysales.com
CALYPSO HAMMERHEAD 5X10, 2007, 100 CUTTING HOURS,
30 HP, 60,000 PSI [67183]
CHIRON DZ15KW, 2005, 2 SPINDLES, 2 PALLETS, ROTARIES ON BOTH, 3200 PSI CHIP BLASTER.
EVERY OPTION. [95173]
– C-axis, Live Milling –DOOSAN DAEWOO PUMA 400LMB,
18"Chk, 4.62" HOLE, SELF CENTERING STEADY, (2006) [108990]
OKUMA MC-4VAE HS, 1993, 30"X, 16"Y, 17"Z, 12,000 RPM, 4TH READY, 12000 RPM - NEW SPINDLE! [98924]
3/4" STAR SR20R I, FANUC 18IT, 2002, LNS 226 EXPRESS, C-AXIS, COMING OUT OF TOP QUALITY
SWISS HOUSE. [99036]
118", OM TMS 1-30/70, 118" TABLE, 275" MAX SWING, DRO,
PENDANT CONTROL [108989]
CALYPSO HAMMERHEADX10, 2007, 100 CUTTING HOURS
30 HP, 60,000 PSI [67183]
60.1"X, 29"Y, 25.9"Z, OKK VM-7III,2005, GEARED, 50 TAPER,
6000 RPM [99057]
– Very Large Capacity CNC Floor Mill! –7" WOTAN RAPID 6, SIEMENS 805M, 1978/1990'S, 551" X 188" X 39" + 35",
ROTARY [99033]
BROTHER TC32B QT, 2006, 21.7"X, 15.7"Y, 16.3"Z, 2-PALLET, 2-NIKKEN
ROTARY TABLES, 16,000 RPM, HSK. [99058]
See inside for many more great offers!
Clark Machinery is pleased to offer the followingmachines for your consideration
CLARKMachinery Sales, LLC
1606 Trebor Ct., Lutherville, MD 21093-4952Tel: 410-252-5494 Fax: 443-269-0660Email: [email protected]
AUTOMATIC SCREW MACHINES:5/8", STAR, No. SR16, FANUC 16TTA, 1996, ---MANY, MANY TOOLS AND EXTRAS --- [74646]3/4" CITIZEN L20-VII, (1995) IEMCA 542 MAGAZINE BARFEED [99039]3/4", 1993 CITIZEN M20, MITS. MELDAS 530LHC CNTRL., 15 DEG. MAIN [98908]3/4", HANWHA ML20H, FANUC 18IT, 2000, FED EX MINI SWISS BARFEED [74668]3/4", HARDINGE ST-20, FANUC OT-C, 1995, SUB, LIVE, LNS BARFEED -- MUST MOVE!! [74629]3/4" STAR SR20R I, FANUC 18IT, 2002, LNS 226 EXPRESS, C-AXIS [99036]3/4", TSUGAMI SX20, 1995, AML 225 MAG. BAR, 1000 PSI. GREAT MACHINE. MAKE OFFER! [74496]1", CITIZEN E25J, CINCOM CNC, 1994/95 Cucchi Mag. bar loader [41809]1", HARDINGE ST225B, FANUC 18IT, 2000, C-AXIS, LNS 226 BARFEED [74580]
BORING MILLS, HORIZONTAL:5 1/8", SCHARMANN HBM50, 1967, 1000 RPM, BAUSCH & LOMB DRO [95199]5.3" CINCINNATI-GILBERT, 230" x 90" x 36" DELTA DYNAPATH 50, 1978/2002 RETRO [95105]5" GRAY 550, DELTA 20, 396" x 126" x 32" 45", 1500 RPM [99037]7" WOTAN RAPID 6, SIEMENS 805M, 1978/1990'S, 551" X 188" X 39" + 35", ROTARY [99033]3 1/2", CINCINNATI GILBERT HBM, TAILSTOCK, 1480 RPM, 1959, GLASS SCALES [74710]4", DEFUM WFM-100, CNC RETROFIT CANDIDATE, 59" X 59"(y) X 23" & 35" IN & OUT [63728]
BORING MILLS, VERTICAL:56", BULLARD DYN-AU TAPE IV, ALLEN BRADLEY 8200, 1976/1987 4-AXIS, PWR CHUCK [95103]63", TONGIL TVL-60, FANUC OI, 2008, 80.7" SWING/ 63" TABLE [98978]71" TOSHIBA TMC-16, FANUC 18T, 1982/2005 16 ATC, LIVE MILLING/C-AXIS [95104]118", OM TMS 1-30/70, 118" TABLE, 275" MAX SWING, DRO, PENDANT CONTROL [108989]
BRAKES, PRESS:12 Ga. x 72", PACIFIC MODEL 40-6, 1970, AUTOMEC CNC 99 CONTROL [74591]150 Ton, ACCURPRESS ACCELL PRESS BRAKE, 12', 2007, 6-AXIS [95147]335 Ton, CINCINNATI 350FM-10, BACKGUAGE - AUTOGUAGE 1000, [99055]
COORDINATE MEASURING MACHINES:PRISMO 7, 1993, 35" x 35" x 27" TRAVELS, C98 CNC [108985]
ELECTRIC DISCHARGE MACHINES:CHARMILLES ROBO FORM 725, 1994, 27" X 19" X 21" 16 ATC WELL EQUIPPED [74642]EDM SOLUTIONS SATURN (2006) UNDER 100 HOURS BURN, 80.5" X 40" X 24" TRAVELS [95195]SODICK AQ55L, 40 Amp, 2006, ONLY 20 HRS. OF BURN TIME! 6 POS. ATC [95187]
FLAME CUTTING EQUIPMENT:THERMADYNE AVIATOR XLT, 2005,Burny 1250 Plus control,12'x6' table size [74725]
CNC CUT-OFF LATHE:MODERN MACHINE TOOL 2LNC, 2000, 2.25" x 22' CUTTING CAPACITY, GE Fanuc 18i-T [108994]
LATHES, CHUCKING:HAAS GT-20, 8"Chk, 5C COLLET, BOLT ON TURRET, 3", 2008, [95171]HAAS SL-20B APL, 8"Chk, 2008, BIG BORE OPTION, AUTO PARTS LOADER, 5 HOURS USE [98954]WARNER SWASEY 3SC M5240 (1980) 24" 3 JAW CHK., 60 HP, 4" ID IN DRAW TUBE [95094]
LATHES, CNC, 2-AXIS & MULTI-AXIS:HAAS SL-20T APL, 2", 2005, AUTO PARTS LOADER --LOW HOURS [74622]HAAS SL-30T GEARED HEAD, 10"Chk, 3 1/2",12/2000 MFR DATE, 40" CC [98939]HURCO TM-8, MAX, 8"Chk, 2", 2007, TAILSTOCK, BARELY USED [74758]IKEGAI GENESIS 1210, FANUC 21T, 10"Chk, 2.75" BAR CAP, (2000) BOX WAYS [35953]MAZAK QT20, MAZATROL T2, 10"Chk, 40"CC, 3.15" BORE, 1985 [74620]MORI SEIKI DL20, MF-D6 Fanuc ctrl., 8"Chk, 2" bar cap., 1994 [98999]OKUMA L370 BIG BORE LATHE, 10"Chk, (2005) IEMCA VIP 80E MAG BARFEED [74754]EMCO MAIER 332MC, SIEMENS 840D, 5"Chk, 2", 2002, 2 TURRET/ 2 SPINDLE, C-AXIS [108986]EMCO MAIER 365MC, SIEMENS 840D, TWIN SPINDLES, 2.5" CAP, Y-AXIS, 2001 [108991]EMCO MAIER 365, SIEMENS 840D, TAILSTOCK, Y-AXIS, 8"Chk, 2", 2001, [108992]MAZAK INTEGREX 300IV S, MATRIX, 10"Chk, 3", 2006, Y-AXIS. $80K OF TOOLING [99034]MIYANO ABX-64SY, FANUC 31I-TA, 3"BAR CAP, 2005, SUB, Y-AXIS, C-AXIS, BARFEED [98920]MORI SEIKI NL-2000Y, 8"Chk, 2007, (6) LIVE HOLDERS, TS, LNS SERVO 3 BARFEED [99049]OKUMA LT-10M-2ST BIG BORE, OSP-U100L (1999) LIVE MILLING [95127]DOOSAN DAEWOO PUMA 400LMB, C-axis, Live Milling, 18"Chk, 4.62" Hole, SELF CENTERING STEADY, (2006) [108990]
LATHES, TURRET:No. 3L, GISHOLT, 6" HOLE, 26" SWING, 65" CC [99054]No. 5 - 3, JONES & LAMSON, 1967, [108987]
MACHINING CENTERS, HORIZONTAL:TOYODA FA400, 2000, 19.7"X, 19.7"Y, 23.6"Z, CTS, LOW HOURS, 120 ATC [67127]KITAMURA HX300IF, 2006, 20"X, 20"Y, 20"Z, 20,000 RPM, MINT. [74468]HITACHI SEIKI HG-400, 1988, 22"X, 23"Y, 20"Z, 1 DEG, MICRON CNC [99056]TOYODA FA-450, 1994, 23.6"X, 22"Y, 19.7"Z, 1 DEG., 2007 REBUILT SPINDLE [67133]MAZAK FH-680, 1999, 41.94"X, 31.5"Y, 32.4"Z, FULL 4TH, 120 ATC, [98958]MAZAK H-1000, 1989, 64.56"X, 48.03"Y, 39.37"Z, FULL 4TH AXIS, FANUC 11M [95115]
www.clarkmachinerysales.com2
[95104]
[95105]
[74620]
[35953]
[98954]
[67127]
[95187]
[95147]
CLARKMachinery Sales, LLC
1606 Trebor Ct., Lutherville, MD 21093-4952Tel: 410-252-5494 Fax: 443-269-0660Email: [email protected]
MACHINING CENTERS, VERTICAL:SAKAZAKI SMC90N(H), 1989, 11.81"X, 17.72"Y, 17.72"Z, BT40, 4-spindle, 8000 RPM [74612]CHIRON DZ15KW, 2005, 12"X, 16"Y, 14"Z, 2 PALLET, 2 SPINDLE, 4TH TABLE ON EACH [95173]KITAMURA MYCENTER 2XI, 2000, 20"X, 14"Y, 18"Z, FANUC 16iM, 10,000 RPM [99024]BROTHER TC32B QT, 2006, 21.7"X, 15.7"Y, 16.3"Z, 2-PALLET, 2-NIKKEN ROTARY TABLES [99058]KITAMURA 3X, 1994, 29.9"X, 17.9"Y, 18"Z, CONVEYOR (2) MACHINES AVAILABLE [99059]KITAMURA 3X, 1998, 29.9"X, 17.9"Y, 18"Z, 15 HP, 10000 RPM [99060]KITAMURA MYCENTER 3X, 1999, 29.9"X, 17.9"Y, 18"Z, YASNAC I-80, [99025]OKUMA MC-4VAE HS, 1993, 30"X, 16"Y, 17"Z, 4TH READY, 12000 RPM - NEW SPINDLE! [98924]FADAL 3016, 1995, 30"X, 16"Y, 20"Z, W/ VH-65 ROTARY TABLE [99021]FADAL 3016, 1995, 30"X, 16"Y, 20"Z, ONLY RAN ALUMINUM [99022]HAAS VF-2SS, 2004, 30"X, 16"Y, 20"Z, 4th AXIS READY [98955]MORI SEIKI NV5000A/50, 2005, 31.5"X, 20.1"Y, 20.1"Z, NIKKEN 4AXIS, LOW HOURS [95124]MIGHTY VIPER VMC 850 AG, 1998, 34"X, 20"Y, 28"Z, GEAR BOX - 2 SPEED [67195]DAEWOO DMV-500, 1998, 40"X, 19.7"Y, 20"Z, CTS [74553]OKUMA CADET V-4020, 1995, 40"X, 20"Y, 20"Z, SINGLE SHIFT SHOP, 4TH READY [74582]FADAL 4020HT, 1998, 40"X, 20"Y, 28"Z, GLASS SCALES, EXTENDED Z-AXIS [98910]HAAS VF-5/50, 2006, 50"X, 26"Y, 25"Z, 5TH AXIS TABLE ON MACHINE- 297 SPINDLE HRS [95122]OKUMA MC-6VAE, 1988, 59"X, 24"Y, 24"Z, (2) AVAILABLE -- OFFERS SAUGHT! [67187]OKK VM-7III, 2005, 60.1"X, 29"Y, 25.9"Z, GEARED, 50 TAPER, 6000 RPM [99057]MAZAK MTV-815/120 APC, 2005, 120"X, 31.89"Y, 29.53"Z, [95107]HAAS VR-11, 1998, 120"X, 40"Y, 30"Z, 5-AXIS, 32 ATC, BRUSHLESS, PROBE READY [74726]
MACHINING CENTERS, VERTICAL, BRIDGE TYPE:KINGSBURY VMC-600, 2001, 60"X, 50"Y, 18"Z, LOW HOURS, PRICED TO MOVE! [95095]KAO MING KMC 2000, 1989, 79.93"X, 55"Y, 20"Z, GEARED HEAD [98938]CINCINNATI, 120"X, 54"Y, 15"Z, MDSI2 PC BASED CTRL., BRIDGE TYPE [98912]MITSUBISHI VS 17/13, 1998, 125"X, 66"Y, 51"Z, [98915]HILLYER, 146"X, 64"Y, 18"Z, PC BASED CTRL. 2001 RETRO., 30 ATC [98913]HAAS VB-1, 200"X, 84"Y, 40"Z, 5 AXIS BRIDGE-TYPE [98914]ASQUITH MDB 300, 393"X, 157"Y, 50"Z, VERTICAL GANTRY CNC, 2006 RETRO, DELTA 50 [67172]
MILLERS, KNEE:MILLTRONICS RH15, CENT 7, 2005, 25" X 16" X 20" KNEE, TROYKE RH 6" TABLE, 4TH [99048]
MILLERS, VERTICAL:FWA41M, PALAMCO, 1993,42"X,17"Y,20"Z [74748]
SAWS, CIRCULAR COLD:10", WAGNER-KASTO WAS-70, 2000, 24' BAR LENGTH CAP [74566]
WATER JET CUTTING:CALYPSO HAMMERHEAD 5X10, 2007, 100 CUTTING HOURS. [67183]FLOW I6012, FLYING BRIDGE, 2000, 60,000 PSI, 50 HP, 2004 SOFTWARE 6' X 12' [99052]FLOW I6012, 2004, 60,000 PSI, 50 HP [99053]
ACCESSORIES:
BAR LOADER/MAGAZINE TYPE:3.125 "Dia, HAAS SERVO 300, 5', 2001, SERVO DRIVEN [99051]LNS QUICKLOAD SERVO BARFEED, 3-1/8" X 60" CAPACITY, RIGHT SIDE FEED ACCESS [74738]
www.clarkmachinerysales.com
Reduce Your Cost of Ownership with the Economic Stimulus Act of 2008.
Hurry! The end of the year and the end of this opportunity will be here before you know it!
The Section 179 limit for 1st year expense in 2008 is now $250,000(almost double the 2007 limit of $128,000).
What this could mean for your business:Instead of depreciating a newly acquired asset over several years, the Section 179 expense allows a business to take a current year deduction of the full purchase amount up to $250,000 for assets under $800,000. This benefit begins to decline after total new asset acquisition tops $800,000. The amount you can deduct decreases by $1 for every dollar spent above $800,000.
With these temporary tax incentives, you should seriously consider acquiring capital you may need soon to maximize savings.
Go to http://www.irs.gov/formspubs/article/0,,id=177054,00.html for more information.
Sample Savings*Original Equipment Cost: $48,0002008 Potential Tax Savings: $16,800Final Equipment Cost: $31,200Cash Savings on Equipment Purchase: $16,800
*Assuming a 35% tax qualifying purchase
3
[108986]
[95122]
[74726]
[67172]
WE NEED YOUR SURPLUS MACHINES!STOCK PURCHASE OR BROKER
[98954]
Do you have surplus? Let us help you free up floor space and recoup capital.
We urgently need the following:
• Mori Seiki NL2500SY (must have sub & Y-axis)• 100” Swing CNC VTL / VBM• CNC Table Top Horizontal Boring Mils• Late model CNC Swiss Screw Machines• Water Jets of all sizes required• Haas VF-6, 7, 8, 9, 10• 56” Bullard Cutmaster w/side head
Please email/fax/phone us information about your surplus. Somebody needs your machine, they just don’t know about it yet.
CLARKMachinery Sales, LLC
CLARKMachinery Sales, LLC
1606 Trebor Ct. Lutherville, MD 21093
1606 Trebor Ct., Lutherville, MD 21093-4952Tel: 410-252-5494 Fax: 443-269-0660
Email: [email protected] www.clarkmachinerysales.com
Multi-axis Lathes
and Mills!
Boring Mills!
CNC SwissScrew Machines!
[99036]
See insidefor machine
details!
[95127]
[108989]
2008 Tax Benefit
Information Enclosed!Help us keep American Manufacturing strong by informing us about your Surplus Equipment!
