Spur gear - Gearcentralen Neckar...St -02 Z 6 Spur gear Properties: General: Multi-stage, closed...
9
St -01 10/05/CD-E/St-01 Z 5 Spur gear Properties: General: Multi-stage, closed spur gear For use in combination with our motors. Single gear with ball-bearing ingoing shaft (2 bearings back-to-back) Lifetime grease lubrication Housing: Zinc diecast, machined User-defined installation Tooth system tech.: Individually guided gear-pinion combinations Ingoing stage with oblique teeth Ball bearing end shaft Options: Planet gears Loading capacity Max. radial force N 90 Max. axial force N 5 Max. input speed rpm 5000 Temperature range °C -20° – +40° Mounting Shaft diameter mm 5 Weight kg 0.30 (2-stage) – 0.38 (4-stage) Mounting part (standard) front side Translations i Stages M (Nm) 4.6 2 1 0.9 8.9 2 2 0.9 13 2 2 0.9 17.4 2 2 0.9 25 3 3 0.85 35.5 3 3 0.85 i Stages M (Nm) 43.5 3 3 0.85 46.2 4 3.3 0.81 62.2 4 3.3 0.81 82 4 3.3 0.81 96 4 3.3 0.81 110 4 3.3 0.81 i Stages M (Nm) 128 4 3.3 0.81 145 4 3.3 0.81 158 4 3.3 0.81 194 4 3.3 0.81 Dimensions
Transcript of Spur gear - Gearcentralen Neckar...St -02 Z 6 Spur gear Properties: General: Multi-stage, closed...
St -01
10/
05/
CD
-E/
St-0
1
Z 5
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast, machinedUser-defined installation
Tooth system tech.: Individually guided gear-pinion combinationsIngoing stage with oblique teethBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 90Max. axial force N 5Max. input speed rpm 5000Temperature range °C -20° – +40°
Mounting Shaft diameter mm 5Weight kg 0.30 (2-stage)
– 0.38 (4-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
4.6 2 1 0.98.9 2 2 0.913 2 2 0.917.4 2 2 0.925 3 3 0.8535.5 3 3 0.85
i Stages M (Nm) �
43.5 3 3 0.8546.2 4 3.3 0.8162.2 4 3.3 0.8182 4 3.3 0.8196 4 3.3 0.81110 4 3.3 0.81
i Stages M (Nm) �
128 4 3.3 0.81145 4 3.3 0.81158 4 3.3 0.81194 4 3.3 0.81
Dimensions
St -02
Z 6
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast, machinedUser-defined installation
Tooth system tech.: Individually guided gear-pinion combinationsIngoing stage with oblique teethBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 220max. axial force N 22Max. input speed rpm 5000Temperature range °C -20° – +40°
Mounting Shaft diameter mm 8Weight kg 0.30 (2-stage)
– 0.38 (4-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
4.8 2 2.5 0.910.4 2 5.5 0.915.4 2 5.5 0.920.5 2 5.5 0.924.7 3 6.5 0.8531.6 3 6.5 0.85
i Stages M (Nm) �
42 3 6.5 0.8549 3 6.5 0.8564.8 4 7 0.8186.1 4 7 0.81100 4 7 0.81117 4 7 0.81
i Stages M (Nm) �
136 4 7 0.81155 4 7 0.81181 4 7 0.81210 4 7 0.81279 4 7 0.81
Dimensions
St -03
10/
05/
CD
-E/
St-0
3
Z 8
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast, machinedUser-defined installation
Tooth system tech.: Individually guided gear-pinion combinationsIngoing stage with oblique teethBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 400Max. axial force N 40Max. input speed rpm 5000Temperature range °C -20° – +40°
Mounting Shaft diameter mm 10Weight kg 0.66 (2-stage)
– 0.78 (4-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
5.6 2 3 0.913 2 7 0.917.5 2 7 0.925 2 7 0.936.5 3 10.5 0.8543 3 10.5 0.8549.5 3 10.5 0.85
i Stages M (Nm) �
58.5 3 10.5 0.8571 3 10.5 0.8584 3 10.5 0.8596.5 4 12 0.81103 4 12 0.81111 4 12 0.81121 4 12 0.81
i Stages M (Nm) �
131 4 12 0.81143 4 12 0.81165 4 12 0.81194 4 12 0.81237 4 12 0.81279 4 12 0.81
Dimensions
St -04
Z 67
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast, machinedUser-defined installation
Tooth system tech.: Gear-pinion combinations on a common needle bearingBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 220Max. axial force N 22Max. input speed rpm 4500Temperature range °C -20° – +40°
Mounting Shaft diameter mm 8Weight kg 0,42Mounting part (standard) front side
Translations i Stages M (Nm) �
5 2 0.35 0.8210 2 0.35 0.8212.5 2 0.35 0.8220 3 1.4 0.7425 3 1.4 0.7430 3 1.4 0.7440 4 2.8 0.6650 4 2.8 0.66
i Stages M (Nm) �
60 4 2.8 0.6675 4 2.8 0.6680 5 4 0.6100 5 4 0.6125 5 4 0.6150 5 4 0.6188 5 4 0.6234 5 4 0.6
i Stages M (Nm) �
160 6 4 0.54200 6 4 0.54250 6 4 0.54300 6 4 0.54375 6 4 0.54391 6 4 0.54469 6 4 0.54586 6 4 0.54
Dimensions
St -05
10/
05/
CD
-E/
St-0
5
Z 89
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast, machinedUser-defined installation
Tooth system tech.: Gear-pinion combinations on a common needle bearingBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 400Max. axial force N 40Max. input speed rpm 4500Temperature range °C -20° – +40°
Mounting Shaft diameter mm 10Weight kg 0.6Mounting part (standard) front side
Translations i Stages M (Nm) �
5 2 0.7 0.8210 2 0.7 0.8215 2 0.7 0.8220 3 2.8 0.7425 3 2.8 0.7430 3 2.8 0.7440 4 5.6 0.6650 4 5.6 0.66
i Stages M (Nm) �
60 4 5.6 0.6675 4 5.6 0.66100 5 6 0.6125 5 6 0.6156 5 6 0.6188 5 6 0.6225 5 6 0.6270 5 6 0.6
i Stages M (Nm) �
160 6 6 0.54200 6 6 0.54240 6 6 0.54300 6 6 0.54360 6 6 0.54540 6 6 0.54675 6 6 0.54810 6 6 0.54
Dimensions
St -06
M 7
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Machined from massive aluminumUser-defined installationMounting possibility from all accessible sides
Tooth system tech.: Individually guided gear-pinion combinationsIngoing stage with oblique teethBall bearing end shaft
Options: Planet gears
Mounting Shaft diameter mm 12Weight kg 0.66 (2-stage)
– 0.78 (4-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
4.8 2 2.5 0.910.4 2 5.5 0.915.4 2 5.5 0.920.5 2 5.5 0.924.7 3 6.5 0.8531.6 3 6.5 0.85
i Stages M (Nm) �
42 3 6.5 0.8549 3 6.5 0.8564.8 4 7 0.8186.1 4 7 0.81100 4 7 0.81117 4 7 0.81
i Stages M (Nm) �
136 4 7 0.81155 4 7 0.81181 4 7 0.81210 4 7 0.81279 4 7 0.81
Dimensions
Loading capacity Max. radial force N 300Max. axial force N 40Max. input speed rpm 5000Temperature range °C -20° – +40°
motor
woodruff key
St -07
10/
05/
CD
-E/
St-0
7
M 10
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Machined from massive aluminumUser-defined installationMounting possibility from all accessible sides
Tooth system tech.: Individually guided gear-pinion combinationsIngoing stage with oblique teethBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 400Max. axial force N 40Max. input speed rpm 5000Temperature range °C -20° – +40°
Mounting Shaft diameter mm 14Weight kg 2.12 (2-stage)
– 2.6 (4-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
5 2 10 0.911 2 23 0.917.9 2 23 0.921.6 2 23 0.926 3 30 0.85
i Stages M (Nm) �
30 3 30 0.8542 3 30 0.8551 3 30 0.8598.6 4 30 0.81120 4 30 0.81
i Stages M (Nm) �
145 4 30 0.81177 4 30 0.81215 4 30 0.81260 4 30 0.81
Dimensions
motor
woodruff key
St -08
M 67
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc-diecast system housingUser-defined installationMounting possibility from all accessible sides
Tooth system tech.: Gear-pinion combinations on a common needle bearingBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 300Max. axial force N 40Max. input speed rpm 4500Temperature range °C -20° – +40°
Mounting Shaft diameter mm 12Weight kg 0.5Mounting part (standard) front side
Translations i Stages M (Nm) �
5 2 0.35 0.8210 2 0.35 0.8212,5 2 0.35 0.8220 3 1.4 0.7425 3 1.4 0.7430 3 1.4 0.7440 4 2.8 0.6650 4 2.8 0.6660 4 2.8 0.6675 4 2.8 0.6680 5 4 0.6
i Stages M (Nm) �
100 5 4 0.6125 5 4 0.6150 5 4 0.6188 5 4 0.6234 5 4 0.6160 6 4 0.54200 6 4 0.54250 6 4 0.54300 6 4 0.54375 6 4 0.54391 6 4 0.54
i Stages M (Nm) �
469 6 4 0.54586 6 4 0.54750 7 4 0.48937 7 4 0.481172 7 4 0.481200 8 4 0.441500 8 4 0.441875 8 4 0.442344 8 4 0.442441 8 4 0.442930 8 4 0.44
Dimensions
Above:Add-on gearBelow:Solo gear
motorwoodruff key
St -09
10/
05/
CD
-E/
St-0
9
M 189
Spur gearProperties: General: Multi-stage, closed spur gear
For use in combination with our motors.Single gear with ball-bearing ingoing shaft(2 bearings back-to-back)Lifetime grease lubrication
Housing: Zinc diecast plates, aluminum square shaftUser-defined installationMounting possibility from all accessible sides
Tooth system tech.: Gear-pinion combinations on a common needle bearingBall bearing end shaft
Options: Planet gears
Loading capacity Max. radial force N 400Max. axial force N 50Max. input speed rpm 4500Temperature range °C -20° – +40°
Mounting Shaft diameter mm 14Weight kg 1.4 (2-stage)
– 2.1 (6-stage)
Mounting part (standard) front side
Translations i Stages M (Nm) �
4 1 2.5 0.918.4 2 6.5 0.8210.8 2 6.5 0.8213 2 6.5 0.8217.5 2 6.5 0.8225.2 3 10 0.7432.4 3 10 0.74
i Stages M (Nm) �
38.9 3 10 0.7452.5 3 10 0.7475.6 4 15 0.6697.3 4 15 0.66167 4 15 0.66158 4 15 0.66227 5 15 0.6
i Stages M (Nm) �
292 5 15 0.6349 5 15 0.6473 5 15 0.6680 6 15 0.54875 6 15 0.541049 6 15 0.541418 6 15 0.54
Dimensions
woodruff key
stage
stage
stage
stage
stage
stage
