Solwise Ltd [email protected] ZyGMA7 Outdoor Wireless CPE/AP Series 2011/07/01 Solwise Ltd ...

32
Solwise Ltd www.solwise.co.uk [email protected] ZyGMA7 Outdoor Wireless CPE/AP Series 2011/07/01 Solwise Ltd www.solwise.co.uk [email protected]

Transcript of Solwise Ltd [email protected] ZyGMA7 Outdoor Wireless CPE/AP Series 2011/07/01 Solwise Ltd ...

Solwise Ltdwww.solwise.co.uk

[email protected]

ZyGMA7 Outdoor WirelessCPE/AP Series

2011/07/01

Solwise [email protected]

Solwise Ltdwww.solwise.co.uk

[email protected]

Outdoor Wireless

5G 2.4G 2.4G

Z9050L-ANZ9050-ANZ9024-BGNZ9024L-BGN-v2

Z9000-R1Z9000-R2Z9500-5G23

Please refer detail spec in www.zygma7.com

CPE/AP Series

BACKBONE Series

5G

Solwise Ltdwww.solwise.co.uk

[email protected]

Application Arena

Up to 2km

Up to 6kmUp to 10km

Up to 30km (by Multi-hops)

CPE/AP for Local Coverage BACKBONE for Backbone & Backhaul

Solwise Ltdwww.solwise.co.uk

[email protected]

Affordable Infrastructure

Affordable InfrastructureRural Networking

Long-range Wireless up to 5 km (by AP/CPE)up to 10 km (by BACKBONE)up to 30 km (by multiple BACKBONE)

Solwise Ltdwww.solwise.co.uk

[email protected]

CPE/AP Series

2011/07/01

Solwise [email protected]

Solwise Ltdwww.solwise.co.uk

[email protected]

CPE/AP Series

• Featura N5 (Z9050-AN)• Fighter N5 (Z9050L-AN)• Featura N2 (Z9024-BGN)• Fighter N2 (Z9024L-BGN-v

2)

5G 2.4G 2.4G

Z9050L-ANZ9050-ANZ9024-BGNZ9024L-BGN-v2

CPE/AP Series

5G

Solwise Ltdwww.solwise.co.uk

[email protected]

CPE/AP Series

• The CPE/AP products is used as – the CPE of household– the AP for local coverage, or– a set of APs for coverage

• Long-distance point-to-point applications are also supported– the typical distance ranges from 1-5 kilometers, depends on the

antenna and installation setup.• Typical Application Scenarios:

– Campus Networking– Clients of subscribers of WISP– Wireless Connection for IP Surveillance

• Regulation Compliance: – CE Certificate

Solwise Ltdwww.solwise.co.uk

[email protected]

n

AP Mode

Z9050-AN

as AP

Internet

AP Mode

Solwise Ltdwww.solwise.co.uk

[email protected]

CPE Mode

CPE Mode

Z9050-AN

as CPE

Solwise Ltdwww.solwise.co.uk

[email protected]

WDS/Bridge Mode

Z9050-AN

WDS Bridge

Z9050-AN

WDS Bridge

Z9050-AN

WDS Bridge

WDS/Bridge Mode

Solwise Ltdwww.solwise.co.uk

[email protected]

Benchmark Test TopologyZ9050-AN

with 16dBi 5GHz AntennaAs Base Station

6KM4KM

2KM1KM Test 1

As CPETest 2

As CPETest 3

As CPE

Test 4As CPE

Move to

Move to

Move to

Benchmark Test Topology

Solwise Ltdwww.solwise.co.uk

[email protected]

Long-Range Outdoor Wireless

802.11an in 5GHz Band

Long-Range Outdoor Wireless: Design Guideline

Coverage Angel = 35 degree for Internal Antenna

Max Distance= 5km to 6km

External Antenna Connector (2x2)Is Available

1

23A

3B4

Max Throughput = 35~80 Mbps (depends on Distance)

Z9050-AN

Solwise Ltdwww.solwise.co.uk

[email protected]

Long-Range Outdoor Wireless

Coverage Angel = 120 degree for Internal Antenna Max Distance

= 10km to 12 km

802.1bgn in 2.4GHz Band

External Antenna ConnectorIs Available

1

2

3A

3B

4

Z9024-BGN

Max Throughput = 18~73 Mbps (depends on Distance)

Long-Range Outdoor Wireless: Design Guideline

Solwise Ltdwww.solwise.co.uk

[email protected]

PoE out-to-device

Long-Range Outdoor Wireless: PoEZ9050-AN

PoE Out-to-device: 12V(optional Power Adapter 15V/2AIs Available for Z9050-AN)

Solwise Ltdwww.solwise.co.uk

[email protected]

Multiple BSSID

• Feature Description– Allows you to create multiple network n

ames/SSIDs on one AP with individual security and broadcast settings.

– Additionally, you can assign the virtual SSIDs to different VLANs to provide segregation between the virtual wireless networks.

• Benefits– Flexible network deployment

– Channel conservation

– Capital expenditure reduction

Multiple BSSIDZ9050-AN

SSID=“Guest”Security=WEPBSSID=AP Mac Address

SSID=“Employee”Security=WAPBSSID=AP Mac Address

Solwise Ltdwww.solwise.co.uk

[email protected]

LAN2LAN CPE

• Feature Description– Station WDS allows to connect to

the Access Point which is operating in WDS mode.

– Station WDS mode enables packet forwarding at layer 2 level.

• Benefits– Improved performance – Fully transparent for all the layer 2

protocols

LAN2LAN CPEZ9050-AN

WDS AP

WDS Client

Solwise Ltdwww.solwise.co.uk

[email protected]

TDM Coordination• Feature Description

– TCF explicitly uses information on the number of active stations to eliminate the contention period in the DCF (distributed coordination function) of IEEE 802.11. TCF can improve overall throughput and provide fair sharing of resources among active stations.

– It ensures all the clients getting access in a fair manner, and avoids the bandwidth from being occupied by clients with heavy traffic.

• Benefits– Offering fair bandwidth to clients– Solving hidden-node issue– Improved performance

TDM CoordinationZ9050-AN

Base Station

up/down: 1/1Mbps

up/down: 10/10Mbps

Internet

up/down: 20/20 Mbps

Solwise Ltdwww.solwise.co.uk

[email protected]

Power Adjustment in 1dB Increments

• Feature Description– Allows to adjust output power in

1dBm increments

• Benefits– Enable to configure the exact

desired output power value

18

Solwise Ltdwww.solwise.co.uk

[email protected]

HTTPS/SSH

• Feature Description– Hyper Text Transfer Protocol

Secure (HTTPS) is a secure version of the Hyper Text Transfer Protocol (http). HTTPS encrypts and decrypts user page requests.

– The use of HTTPS protects against eavesdropping and attacks.

– SSH Secure Shell provides users with a secure, encrypted mechanism to log into systems and transfer files; it can be viewed as a secure replacement for FTP.

• Benefits– Makes configuration and data

more secure.

ServerPublic Key

Private KeyClient

Encrypted

Data

in Internet

HTTPS

SSH

Solwise Ltdwww.solwise.co.uk

[email protected]

Featura N5 (Z9050-AN)• Wireless Mode for P2P & P2MP Configuration

– AP– Wireless Client– Bridge– AP Repeater– WDS configuration in Bridge Mode or AP Repeater Mode

• Network Mode– Bridge– Router

• Space in Meter/ACK Timeout– By simply specifying distance of the two nodes, the Z9050-AN can automatically self-adjust the proper

ACK timeout value to decrease the chances of data retransmission at long distance.• WLAN Isolation/Wireless Separation

– prevent wireless client from access each other, i.e. the user can not see others who are associated with the same AP. For example, User A and User B live in neighborhood, and subscribe the internet service from WISP company XYZ, XYZ will set the WLAN isolation mode to provide service to A and B by the same AP, but XYZ does not expect A knowing about B or B knowing about A. In this situation, the WLAN isolation is good for XYZ.

• Max Station Num– Available only under AP mode, it defines the maximum amount of wireless clients allowed to be

connected.• 802.1q VLAN• Rate Limiting to Ethernet 1 and Ethernet 2

Solwise Ltdwww.solwise.co.uk

[email protected]

Featura N5 (Z9050-AN)• WMM Support

– WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless communication to define a priority limit on the basis of data type under AP mode only, thus those time-sensitive data, like video/audio data, may own a higher priority than common one. To enable WMM, the wireless client should also support it.

• Short GI(Guard Interval)– Under 802.11n mode, enable it to obtain better data rate if there is no negativ

e compatibility issue.• A-MPDU/A-MSDU Aggregation (Frame Aggregation)

– The data rate of your CPE except wireless client mode could be enhanced greatly with this option enabled; however, if your wireless clients don’t support A-MPDU/A-MSDU aggregation, it is not recommended to enable it.

• IGMP Snooping– IGMP snooping is the process of listening to IGMP network traffic. By enablin

g IGMP snooping, the AP will listen to IGMP membership reports, queries and leave messages to identify the ports that are members of multicast groups. Multicast traffic will only be forwarded to ports identified as members of the specific multicast group or groups.

Solwise Ltdwww.solwise.co.uk

[email protected]

Featura N5 (Z9050-AN)• Access Control List• Link Integration

– Available under AP/Bridge/AP repeater mode, it monitors the connection on the Ethernet port. It can inform the associating wireless clients as soon as the disconnection occurs.

• Disable Broadcast SSID from being scanned– In AP mode, hiding network name is necessary when you are in a wireless

environment that may have potential risk. By disabling broadcast SSID, the STA cannot scan and find the IEEE 802.11a/n Wireless Outdoor CPE, so that malicious attack by some illegal STA could be avoided.

• Spanning Tree Protocol• HT Protect

– Enable HT (High Throughput) protect to ensure HT transmission with MAC mechanism. Under 802.11n mode, wireless client can be divided into HT STA and Non-HT STA, among which the one with HT protect enabled gets higher throughput.

• External Antenna• Antenna Alignment with RSSI and Signal Level Display

Solwise Ltdwww.solwise.co.uk

[email protected]

Featura N5 (Z9050-AN)• SNMP V3• Ping Watchdog for heart-beat check

– IP Address to Ping– Ping Interval– Startup Delay– Failure Count to Reboot

• GPS Coordinate Settings

• Remote Firmware Upgrade• Configuration File Backup/Restore• Manual Remote Reboot• Disable Wireless LAN Interface

– the wireless module of the CPE will stop working and no wireless device can connect to it.

Solwise Ltdwww.solwise.co.uk

[email protected]

Network Activity Monitor

• Feature Description– Allows to monitor the current Wir

eless and Ethernet real throughput in graphical form on the Web User Interface

• Benefits– Easy and convenient to monito

r the performance instead of using other throughput test tools such as Chariot or Microtik

Solwise Ltdwww.solwise.co.uk

[email protected]

Speed Test

• Feature Description– Allows to test the current data

transmission (TX) and data reception (RX) rate with the remote CPE/AP unit.

• Benefits– Easy and convenient monitoring

of the data rate between the bridges

25

Encrypt Ixchariot IPerf Speed Test FTP MemoTX RX TX+RX TX RX TX+RX TX RX TX+RX TX RX TX+RX

None 93.215 93.657 135.433 41.5 42.3 51.3 35.6 36 38.2 71.768 90.68 N/A Mbps, PTP, HT40

Note: Benchmark programs have various figures for the Z9050-AN. These are the referenced numbers for each benchmarks

Solwise Ltdwww.solwise.co.uk

[email protected]

Station Monitor

• Feature Description– Allows to monitor the current

status of the associated client in details

• Benefits– Robust diagnosis and

monitoring

26

Station Monitor

Solwise Ltdwww.solwise.co.uk

[email protected]

Features of Fighter N2/N5

• Reset button on PoE Injector for Factory-default– It has big advantages after

the device is installed. User need not to take off the device for resetting to factory default.

• Software Selectable; Connector for External Antenna

• Wide operating temperature: -30~55 deg

• IP65 Protection

Solwise Ltdwww.solwise.co.uk

[email protected]

Features of Fighter N2/N5

• Reset button on PoE Injector for Factory-default

• SMA Connector for External Antenna

• Wide operating temperature: -30~55 ℃

• IP65 Protection

Solwise Ltdwww.solwise.co.uk

[email protected]

ApplicationExamples

Solwise Ltdwww.solwise.co.uk

[email protected]

Campus Wireless Network

Dormitory

Classroom

Central Building

Campus Network

Internet

Solwise Ltdwww.solwise.co.uk

[email protected]

Z9024-BGN

as AP

Internet

Wireless for IP Surveillance

IP CAM

& CPEIP CAM

& CPE

IP CAM

& CPE

IP CAM

& CPE

Wireless for IP Surveillance

Solwise Ltdwww.solwise.co.uk

[email protected]

OWL Application Summary