PDT Ver. # EXE Ver. # FlashList Ver. #

2008-01-14 2008-01-14 2007-12-25

2008-01-16 2008-01-16 2007-12-25

2008-01-23 2008-01-23 2007-12-25

CodeBank Ver. # FA Ver. # CBVer. # REGUPD Ver. #

2007-12-24 2007-09-28 2.1.0.0 2007-07-05

2007-12-24 2007-09-28 2.1.0.0 2007-07-05

2007-12-24 2007-09-28 2.1.0.0 2007-07-05

CreateDiskImage Ver. # Note

2008-01-14

2008-01-14

2008-01-14

PDT Ver. # Description

2008-01-14

2008-01-16

2008-01-23

1. Update exe 2. Add CreateDiskImage tool 1. Update exe 1. Update exe

EXE Ver. #

2008-1-14

2008-1-16

2008-1-23

2008-3-10

Description

AP:1. Add measure current and measure voltage for power board solution along with 3 flag “AutoHubPower, “MeasureVoltage”, ”MeasureCurrent, ”CURRENTLIMIT”in “default.ini”.2. Do not update config, and add another file “information.ini” for updating serial number and test result.3. Append an image file creator tool. PreCopy can load directory and image file.4. PreCopy can work to private zone.5. Comparison between original image file and cdrom in pen driver.

AP:1. Fixed multi-device r/w test with random pattern.2. Fixed computer virtual memory lack when load .iso.

AP:1. Record firmware checksum in config for qc tool checking.2. Record cbver in default.ini for searching firmware version

Flash support：1. HY27UV08BGFM2. K9MDG08U5M3. HY27UG088G5B

CBVer. # Description

2.1.0.0

VER00 = C070213A_F070213AVER01 = C070328A_F070328AVER02 = C070419A_F070419AVER03 = C070521A_F070514AVER04 = C070601A_F070524AVER05 = C070620A_F070620AVER06 = C070709A_F070711AVER07 = C070729A_F070727AVER08 = C070813A_F070806AVER09 = C070821A_F070816AVER0A = C070826A_F070824AVER0B = C070830A_F070902AVER0C = C070916A_F070916AVER0D = C071006A_F071011AVER0E = C071120A_F071110AVER0F = C070822A_F071106AVER10 = C071204A_F071211AVER11 = C071224A_F071225A

FlashList Ver. #

Description

CodeBank Ver. #

Description

FA Ver. # Description

REGPUD Ver. # Description