SF200-0160-01 REV 03 Manual - Noventri Digital REV 03 Manual.pdf · PDF file SF200 Manual...

Click here to load reader

  • date post

    29-May-2020
  • Category

    Documents

  • view

    5
  • download

    0

Embed Size (px)

Transcript of SF200-0160-01 REV 03 Manual - Noventri Digital REV 03 Manual.pdf · PDF file SF200 Manual...

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 1 of 27

    SF-200 MANUAL

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 2 of 27

    SF-200 Manual

    Table of Contents

    1. Overview / Default IP Address / Default Password................................................... 3 2. Getting Started .......................................................................................................... 3 3. I/O Connectors........................................................................................................... 4 4. Installation ................................................................................................................ 8 5. Network Connection.................................................................................................. 15 6. Web App Configuration................ ............................................................................ 18 7. Stand-Alone (Sneakernet)..........................................................................................23 8. Optional Remote Control .......................................................................................... 24 9. Specifications ........................................................................................................... 25 10. Proper Disposal ........................................................................................................ 27

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 3 of 27

    1. Overview / Default IP Address / Default Password

    1.1 The Noventri SF-200 is a small, solid state digital signage player that is part of the Noventri Eco-Series™ line.

    1.2 The SF-200 is exclusively designed to be used with the Noventri Suite and the Noventri Server software that can be downloaded free from the Noventri Forum. http://www.noventri.com/forum

    1.3 The SF-200 can be used as a stand-alone (Sneakernet) player, as part of a local area network, or over the internet.

    1.4 When using Sneakernet, the SF-200 plays content that is created in the Suite software, published to a USB Drive, then hand carried and inserted into the SF-200 player.

    1.5 When used as part of a local area network, the SF-200 plays content that is created in the Suite software, published to the Noventri Server, which then sends it to the SF-200 player.

    1.6 The SF-200, when used over the Internet, plays content that is created in the Suite software, published to the Noventri Server, which can connect and send the content via your local area network across the internet to the SF-200 player.

    1.7 Default IP Address – 192.168.0.190 (see the Network Connection section of this Manual)

    1.8 Default Password – noventri (see the Web App Configuration section of this Manual)

    2. Getting Started

    2.1 The following is included when you receive your Noventri SF-200 player:

    • SF-200 player • USB Drive (installed)

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 4 of 27

    The following are sold separately:

    • Power Adapter (required) (US, EU, or UK) • Remote Control with Batteries

    • AV Cable • RGB Cable • Mounting Plate with Hardware • HDMI Cable Noventri for all your accessory needs. 1-301-790-0103 www.noventri.com

    2.2 Other items needed that can also be purchased from Noventri:

    • Monitor • Surge Suppressor • Ethernet Cable (cat5e) • HDMI to DVI Cable (optional) • Computer for running Noventri Suite/Server software Noventri for all your accessory needs. 1-301-790-0103 www.noventri.com

    3. I/O Connectors

    3.1 Power Connector

    3.1.1 We recommend using a Surge Suppressor to protect your SF-200 player. The SF-200 Power Adapter plugs into the Surge Suppressor and connects to the DC 12V input on the SF-200. Note: Power Adapter is Sold Separately

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 5 of 27

    3.2 HDMI OUT

    3.2.1 Connection from the SF-200 HDMI output to the monitor is typically made using a HDMI to HDMI cable. If your monitor does not have an HDMI input and has a DVI input, a HDMI to DVI cable can be used.

    Note: For best results, the video cable should be less then 3M long.

    3.3 Ethernet Port

    3.3.1 Connection from the SF-200 to the local area network is made through the Ethernet port (LAN)). If you plan on using your SF-200 as a networked player you will need to make the connection using an Ethernet (Cat-5) cable.

    3.3.2 By default, the SF-200 is set to get an IP Address using DHCP. If the player cannot get a DHCP assigned address, it will then use 192.168.0.190 as the default IP Address. You can also Statically assign an IP Address. (see the Web App Configuration section of this Manual) You can also make arrangements with Noventri to customize your SF-200 player’s IP Address for your network.

    1-301-790-0103 www.noventri.com

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 6 of 27

    3.4 USB Port

    Note: The only time the USB Drive should ever be removed is to Publish Sneakernet and then it should be reinstalled.

    3.4.1 The USB ports are used to connect the USB Drive to your

    SF-200 Player. Either USB Port can be used. 3.4.2 The SF-200 is shipped with the USB Drive installed. 3.4.3 The USB Drive stores the content of your projects and

    MUST BE INSTALLED for the SF-200 to operate.

    3.4.4 Using the SF-200 for Sneakernet is the only time the USB Drive should be removed and this is only to temporarily Publish to the Drive and then it is reinstalled. The Drive MUST BE INSTALLED for the SF-200 to operate.

    3.5 Composite Video Port

    3.5.1 The SF-200 has a Composite Video Port (CVBS) for future use.

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 7 of 27

    3.6 Component Video Port

    3.6.1 The SF-200 has a Component Video Port (YPbPr) for future use.

    3.7 Optical Digital Audio Port

    3.7.1 The SF-200 has an Optical Audio Port (S/PDIF) for future use.

    3.8 SD Card Slot

    3.8.1 The SF-200 has a SD Card Slot for future use.

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 8 of 27

    4. Installation

    4.1 Every installation is unique and can range from being very simple with a desktop monitor to very complex requiring wall or ceiling mount arrangements. Installation specific accessories and custom installations available through Noventri. 1-301-790-0103 www.noventri.com The following installation instructions cover a simple desktop installation and assume you have Ethernet (for non-Sneakernet) and Power available.

    4.2 The back of Monitors typically have a mounting hole pattern (VESA). If these mounting holes are not being used to mount the monitor, they can be used to mount the SF-200 to the Monitor.

    To do this use the SF-200 Mounting Plate (purchased separately) . 4.2.1 The SF-200 Mounting Plate comes with hardware for mounting the

    SF-200 to the Mounting Plate, but does not include the hardware need for mounting the Mounting Plate to the Monitor. Contact Noventri for all your accessory needs.

    1-301-790-0103 www.noventri.com 4.2.2 First determine from what direction the Power Adapter cord and

    Ethernet cable will coming from and also consider what direction would be best for Remote Control access.

    4.2.3 You can then position the SF-200 onto the Mounting Plate in any

    one of four different directions allowing for Remote Access and easy cable entry.

    (see figure 1)

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 9 of 27

    4.2.4 Verify that you are mounting the SF-200 on the correct side of the Mounting Plate.

    Bend in the plate is to allow room for the screw heads between the Mounting Plate and the Monitor. So this side of the Mounting Plate always goes toward the Monitor.

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 10 of 27

    Figure 1

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 11 of 27

    4.2.5 Connect the SF-200 to the Mounting Pate using the

    hardware that came with the Mounting Plate. Be careful not to over tighten.

    Qty = 4 Thread Forming Screws Qty = 4 Washers

    Note1 : The SF-200 Case is held together with four small screws. DO NOT remove these small screws.

    Note 2: The Thread Forming Screws that are used to mount the SF-200

    to the Mounting Plate will screw into the same hole as the small screws but will not go deep enough to touch the small screws.

    Note 3: The Thread Forming Screws will form their own threads into the case as you screw them in.

  • SF200 Manual SF200E-0160-01 REV 03

    Diane Smith 4/15/13

    Page 12 of 27