Schedule of Accreditation United Kingdom Accreditation Service · 2021. 2. 18. · Assessment...
Transcript of Schedule of Accreditation United Kingdom Accreditation Service · 2021. 2. 18. · Assessment...
Assessment Manager: WC1 Page 1 of 120
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Kitemark Court
Davy Avenue
Knowlhill
Milton Keynes
MK5 8PP
Sales Enquiry Tel: +44 (0)845 080 9000
Fax: +44 (0)1908 228060
Sales Enquiry Email: [email protected]
BSI Website: www.bsigroup.com
Regulatory Contact: Maria Crane
Tel: +44 (0)1908 814724
Email: [email protected]
Locations where certification activities covered by the above Accreditation Standard are undertaken
Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP UNITED KINGDOM
Kitemark House Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ UNITED KINGDOM
Holywell Park Ashby Road Loughborough Leicestershire LE11 3AQ UNITED KINGDOM
Room 1006-1011,10/F Ciro’s Plaza 388 Nanjing W. RD Shanghai 200003 PR CHINA
Say Building John M. Keynesplein 9, 4th floor 1066 EP Amsterdam NETHERLANDS
Suite 208 Sultan Business Centre PO Box 49400 Dubai UNITED ARAB EMIRATES
210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA
Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas.
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 2 of 120
DETAIL OF ACCREDITATION
Product Standard
CONSTRUCTION Timber Structural timber BS EN 519:1995 Particle board BS EN 312:2003 Fibre building boards BS EN 622-4:1997 Windows – wood BS 644-1:1989 Street Furniture Gully tops and manhole tops for vehicular and pedestrian areas
BS EN 124:1994
Drainage Channels for vehicular and pedestrian areas BS EN 1433:2002 Road & Road Marking Materials Road marking materials BS EN 1871:2000 Sharps Containers Single-use Sharps Containers - Sharps Injury protection – Requirements and Test Methods
BS EN ISO 23907-1: 2019
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 3 of 120
Product Standard
Plastic Pipes and Fittings
Plastic Piping systems for water supply - Unplasticised poly (vinylChloride) (PVC-U) Part 1 - General
BS EN 1452-1:2000
Part 2 – Pipes BS EN 1452-2:2000
BS EN ISO 1452-2:2009 Part 3 – Fittings BS EN 1452-3:2000
BS EN ISO 1452-3:2009 Part 5 - Fittings for purpose of the system BS EN 1452-5:2000 Cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500l capacity used for domestic purposes
BS 4213:2004
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 1. General requirements
BS 7291-1:2006 BS 7291-1:2010
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 2. Specification for polybutylene (pb) pipes and associated fittings.
BS 7291-2:2006 BS 7291-2:2010
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 3. Specification for crosslinked polyethylene (pe-x) pipes and associated fittings
BS 7291-3:2006 BS 7291-3:2010
Buried polyethylene (PE) Pipes for water supply - Specifications First Edition
ISO 4427 Pt 12-15:1996 BS ISO 4427-2:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 4 of 120
Product Standard
Plastic Pipes and Fittings (cont’d) Plastics piping systems for water supply and for drainage and sewerage under pressure. Polyethylene (PE). General
BS ISO 4427-1: 2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes
BS ISO 4427-2: 2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fittings
BS ISO 4427-3: 2019
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fitness for purpose of the system
BS ISO 4427-5: 2019
Buried polyethylene (PE) Pipes for the supply of gaseous fuels. Metric series - specifications
ISO 4437:1997 BS ISO 4437-2:2014
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
BS ISO 4437-2:2014 BS EN 1555-2:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS ISO 4437-3:2014 BS EN 1555-3:2010 + A1:2012
Polyethylene pipes and fittings for natural gas and suitable manufactured gas Part 2: Pipes for use at pressures up to 5.5 bar.
GIS/PL2-2:2016
Polyethylene pipes and fittings for natural gas and suitable manufactured gas Part 4: Fusion fittings with integral heating element(s).
GIS/PL2-4:2019
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 5 of 120
Product Standard
Polyethylene pipes and fittings for natural gas and suitable manufactured gas Part 6: Spigot end fittings for electrofusion and/or butt fusion purposes.
GIS/PL2-6:2018
Polyethylene pipes and fittings for natural gas and suitable manufactured gas Part 8: Pipes for use at pressures up to 7 bar.
GIS/PL2-8:2014
Polyethylene water pipes BS EN 12201-2:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
BS EN 1401-1:2019
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes, fittings and the systems.
BS EN 1329-1:2014 + A1:2018
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 6 of 120
Product Standard
Plastic Windows and Doors Plastic windows made from PVC-U extruded hollow profiles
BS 7412:2002
White PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: Materials Type Ae
BS EN 12608:2003 (Previously BS 7413)
Insulation Thermal Insulating Products - Factory made mineral wool
BS EN 13162:2012 + A1:2015 BS EN 14303:2009 + A1:2013
Thermal Insulating Products - Factory made products of expanded polystyrene
BS EN 13163:2001
Thermal Insulating Products - Factory made products of extruded polystyrene foam
BS EN 13164:2001
Thermal Insulating Products - Factory made rigid polyurethane foam
BS EN 13165:2001
Thermal Insulating Products - Factory made products of phenolic foam
BS EN 13166:2001
Thermal Insulating Products - Factory made cellular glass
BS EN 13167:2001
Thermal Insulating Products - Factory made wood wool products
BS EN 13168:2001
Thermal Insulating Products - Factory made products of expanded perlite
BS EN 13169:2001
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 7 of 120
Product Standard
Insulation (cont’d) Thermal Insulating Products - Factory made products of expanded cork
BS EN 13170:2001
Thermal Insulating Products - Factory made wood fibre BS EN 13171:2008 Glass Ballitini (glass beads) BS EN 1423:1998 and
BS EN 1424:1998 Insulating Glass Units BS EN 1279-2 & BS EN 1279-3:2002 Clay/Ceramic Clay pavers BS EN 1344:2002 Clay masonry units BS 3921:1985 and
BS EN 771-1:2011 + A1:2015 Roof tiles and fittings – clay BS EN 1304:2005 Slate/Stone Roofing slates BS 680-1:1994
BS EN 12326-1 and BS EN 12326-2:2004 Cast stone BS 1217:1997 Reconstructed stone masonry units BS 6457:1984
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 8 of 120
Product Standard
Cementitious Portland - blast furnace cement BS EN 197-1:2000 Pozzolanic cement BS 6610:1996 Portland cement BS EN 197-1:2000 Portland - PFA cement BS EN 197-1:2000 Sulphate resisting Portland cement BS 4027:1996 Building Lime BS EN 459-1:2001 Pulverised fuel ash BS 3892-1:1997 Fly ash for concrete BS EN 450-1:2012 Rendering and Plastering Mortar BS EN 998-1:2003 Masonry Mortar BS EN 998-2:2016 Screed Materials and Floor Screeds BS EN 13813:2002 Cement RC - 03 Spanish Construction Regulations Ready Mixed Concrete Ready mixed concrete BS EN 206:2013 + A1:2016
BS 8500-1:2015 + A2:2019 BS 8500-2:2015 + A2:2019
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 9 of 120
Product Standard
Pre-cast Concrete Precast aggregate concrete masonry units BS EN 771-3:2011 + A1:2015 Precast autoclaved concrete masonry units BS EN 771-4:2011 + A1:2015 Manufactured stone masonry units BS EN 771-5:2011 + A1:2015 Pre-cast Concrete Products - Box Culverts BS EN 14844:2006 + A2:2011 Pre-cast Concrete Products - Bean and Block Floor Systems. Concrete Blocks
BS EN 15037-2:2009 + A1:2011
Metal Windows and Doors Windows - aluminium alloy BS 4873:2004 Patio doors – aluminium BS 5286:1978 Security/Fire Doors/Windows/Hardware Windows and external pedestrian doorsets – Performance characteristics
BS EN 14351-1:2006 + A2:2016
Enhanced security performance requirements for doorsets and windows
PAS 24:2016
Emergency Exit Devices BS EN 179:1998 Panic Exit Devices BS EN 1125:1997 Determination of the fire resistance of non-loadbearing elements of construction
BS 476-22:1987
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 10 of 120
Product Standard
Security/Fire Doors/Windows/Hardware (cont’d) Fire resistance test for door and shutter assemblies and openable windows
BS EN 1634-1:2014
Fire resisting and/or smoke control characteristics of pedestrian doorsets, garage doors and openable windows
BS EN 16034:2014
Wrought Metal Copper tubes for water, gas and sanitation BS EN 1057:2006 ELECTRONIC COMPONENTS Electronic Components BS 9000 and IECQ-CECC Scheme MISCELLANEOUS Rubber Condoms - natural latex male BS EN 600:1996
BS EN ISO 4074:2015 BS EN ISO 23409:2011
Hot water bottles BS 1970:2001 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanised rubber.
BS EN 681-1:1996
Additives & Sealants Adhesives for Tiles BS EN 12004:2001
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 11 of 120
Product Standard
FIRE SAFETY PRODUCTS & INSTALLATIONS Fire Extinguishing Fire Extinguishers BS EN 3-7:2004 + A1:2007
BS EN 3-10:2009 BS EN 1866-1:2007 BS 6165:2002
Fire Blankets BS EN 1869:1997 Fire Brigade Equipment BS 336:1989 Fire-Fighting Hoses – Non-percolating lay-flat hoses for fixed systems
BS 6391:2009 BS EN 14540:2014
Fire-Fighting Hoses – Semi-rigid hoses for fixed systems
BS EN 694:2014
Fixed Fire Fighting Systems - Hose reels with semi-rigid hoses
BS EN 671-1:2012
Fixed Fire Fighting Systems - Hose systems with lay-flat hose
BS EN 671-2:2012
Fixed Fire Fighting Systems - Components for gas extinguishing systems
BS EN 12094-1:2003
Fixed Fire Fighting Systems – Gas extinguishing systems
BS EN 15004-1: 2008 Fire testing to Annex C and verification of the design process to clauses 4, 5, 6, and 7 (Excluding Installation and Maintenance)
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 12 of 120
Product Standard
Fire Systems Equipment Provision and Maintenance of Portable Fire Extinguishers
BAFE Scheme: SP101-1 Version 1: April 2017
Service & Maintenance of Dry & Wet Riser/Falling Installations
BAFE Scheme SP105 Version 1: April 2019
Design, Installation, Commissioning & Maintenance of Fire Detection and Fire Alarm Systems
BAFE Scheme: SP203-1 Version 7.1: May 2019
Design, Installation, Commissioning & Maintenance of Fixed Gaseous Fire Suppression Systems
BAFE Scheme: SP203-3 Version 2: February 2013
Design, Installation, Commissioning & Maintenance of Emergency Lighting Systems
BAFE Scheme: SP203-4 Version 1: June 2013
Design, Installation, Commissioning, Recharge & Maintenance of Kitchen Fire Protection Systems
BAFE Scheme SP206 Version 0: January 2018
Design, Installation, Commissioning & Maintenance of Evacuation Alert Systems
BAFE Scheme SP207 Version 1: July 2020
Fire Hydrant Systems Equipment BS 750:2006
BS 750:2012 (Clauses 1 to 13 only) BS 5041-1:1987 BS 5041-2:1987 BS 5041-3:1975
Fire Detection and Alarm Systems BS EN 54 all parts Combustible Gas Detection Apparatus BS EN 50194:2000 Smoke Alarms BS EN 14604:2005
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 13 of 120
Product Standard
Fire Systems Equipment (cont’d) Fire detection and alarm devices for dwellings: Specification for heat alarms.
BS 5446-2:2003
Smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators
BS EN 12101-3:2015
Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements
BS EN 50575:2014 + A1:2016
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 14 of 120
Product Standard
PERSONAL PROTECTIVE EQUIPMENT Eye Protection Eye protection for vehicle users BS 4110:1999 Eye protection – welding BS EN 175:1997 Eye protection – personal BS EN 166:2002 Eye protectors for motor cyclists and racing drivers AS 1609:1981 Welding filters BS EN 169:2002 Ultraviolet filters BS EN 170:2002 Infrared Filters BS EN 171:2002 Sun glare filters for industrial use BS EN 172:1995 Mesh face screens BS EN 1731:2006 High performance visors intended only for use with protective helmets
BS EN 14458:2018
Supplementary requirements for the testing and certification of face shields for electrical works
GS-ET-29
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 15 of 120
Product Standard
Hearing Protection Hearing protection - Ear-muffs BS EN 352-1:2002 Hearing protection - Ear-plugs BS EN 352-2:2002 Hearing protection - Ear-muffs attached to an industrial safety helmet
BS EN 352-3:2002
Hand Protection Gloves - General requirements BS EN 420:2003+A1:2009 Medical Gloves for single use BS EN 455-1:2000
BS EN 455-2:2009+A2:2013 BS EN 455-3:2015
Protective gloves – ionizing radiation and radioactive contamination
BS EN 421:2010
Protective Gloves – chemicals and micro organisms BS EN 374-1:2016 + A1:2018
BS EN 374-2:2014 BS EN 374-3:2003 BS EN 374-4:2013 BS EN 16523-1:2015
Protective gloves – Mechanical risks BS EN 388:2016 + A1:2018 Protective gloves – Firefighters BS EN 659:2003 +A1:2008 Protective gloves – Live working: Gloves of insulating materials
BS EN 60903:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 16 of 120
Product Standard
Helmets Helmets – Equestrian BS EN 1384:1997
BS EN 1384:2012 PAS 015:1995 PAS015:2011
Helmets - General purpose industrial safety BS EN 397:2012+A1:2012 Helmets – High performance industrial helmets BS EN 14052:2012+A1:2012 Helmets – Industrial Bump Caps BS EN 812:2012 Helmets - Pedal Cyclists and Users of Skateboards BS EN 1078:2012 Helmets - Head protectors for cricketers BS 7928:2013 Helmets – Airborne Sports BS EN 966:2012+A1:2012 Helmets – Alpine Skiers and Snowboarders BS EN 1077:2007 Helmets – Canoeing and white water sports BS EN 1385:2012 Helmets – Firefighting in buildings and other structures BS EN 443:2008 Helmets – Electrically insulating for use on low voltage installations
BS EN 50365:2002
Helmets - Vehicle users BS 6658:1985 Helmets - Police anti-riot PAS 017:1995
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 17 of 120
Product Standard
Helmets (cont’d) Helmets - Mountaineering BS EN 12492:2012 Protective helmets for vehicle users BS 6658:1985
ASNZ 1698:2006 AS 1609-1981 BS 4110:1979 (withdrawn)
Protective Footwear Protective Footwear - Firefighters BS EN 15090:2012 Protective footwear - Motorcycle riders BS EN 13634:2010 Personal Protective Equipment - Safety footwear BS EN ISO 20345:2011 Personal Protective Equipment - Protective footwear BS EN ISO 20346:2014 Personal Protective Equipment - Occupational footwear
BS EN ISO 20347:2012
Protective Clothing High visibility clothing BS EN ISO 20471:2013 + A1:2016 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles
BS EN 943-1:2002 BS EN 943-1:2015 BS EN 943-2:2002 BS EN 943-2:2019
Protective clothing against radioactive contamination BS EN 1073-1:2016 + A1:2018
BS EN 1073-2:2002
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 18 of 120
Product Standard
Protective Clothing (Cont’d) Protective Clothing against Electrostatic Risks BS EN 1149-5:2018 Respirators Respirators - Filtering facepieces BS EN 149:2001+A1:2009 Respirators - Half masks and quarter masks BS EN 140:1999 Respirators - Full face masks BS EN 136:1998 Respirators - Particle filters BS EN 143:2000 Respirators - Gas filter(s) and combined filter(s) BS EN 14387:2004+A1:2008 Respirators - Powered filtering devices incorporating a helmet or a hood.
BS EN 12941:1998+A2:2008
Respirators - Power assisted filtering devices incorporating full face masks, half masks or quarter masks
BS EN 12942:1998+A2:2008
Self Contained Open-Circuit Compressed Air Breathing Apparatus with Escape Hood
BS EN 1146:2005
Self Contained Breathing Apparatus BS EN 137:2006 Continuous Flow Compressed Airline Breathing Apparatus
BS EN 14594:2005
Compressed air line breathing apparatus with demand valve. Apparatus with a full mask.
BS EN 14593-1:2005
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 19 of 120
Product Standard
Respirators (cont’d) Compressed air line breathing apparatus with demand valve. Apparatus with a half mask
BS EN 14593-2:2006
Respiratory protective devices for self-rescue. Filtering devices with hood for escape
BS EN 403:2004
Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents – Positive pressure
BS 8468-1:2006
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents – Negative pressure
BS 8468-2:2006
Self-contained closed-circuit breathing apparatus for escape
BS EN 13794:2002
Personal Fall Protection Equipment Descender Devices BS EN 341:2011 Work positioning belts BS EN 358:2018 Retractable type fall arresters BS EN 360:2002 Guided type fall arresters BS EN 353-1:2014 + A1:2017 Full Body Harnesses BS EN 361:2002 Connectors BS EN 362:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 20 of 120
Product Standard
Personal Fall Protection Equipment (cont’d) Anchor points BS EN 795:2012 Sit harnesses BS EN 813:2008 Lanyards BS EN 354:2010 Energy absorbers BS EN 355:2002 Rescue and Lifting Devices BS EN 1496:2017 TELECOMMUNICATIONS Total Metering and Billing Systems (TMBS) Ofcom Metering and Billing Direction - 2017 GENERAL HARDWARE Thermostatic Radiator Valves CENMARK/KEYMARK BS EN 215 Metallic butterfly values for general purpose BS EN 593:2017 Steel and cast iron check valves BS EN 16767:2016 AUTOMOTIVE Automotive Services Specification for vehicle damage repair processes
BS 10125:2014 + A1:2016
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 21 of 120
Product Standard
TRUST SERVICE PROVISION
Accredited to ETSI EN 319 403 for the certification of Trust Service Providers including compliance with the relevant requirements of the eIDAS Regulation (EU) No. 910/2014 and in accordance with the current UK ICO guidance - Achieving ‘qualified status’ and ceasing to provide qualified trust services under the eIDAS Regulation and for the standards listed below.
Qualified certificate for electronic signature (Article 28 of the eIDAS Regulation, (EU) No. 910/2014 – refers)
ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 411-1 V1.1.1 (2016-02) ETSI EN 319 411-2 V2.1.1 (2016-02)
Qualified certificate for electronic seal (Article 38 of the eIDAS Regulation, (EU) No. 910/2014 – refers)
ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 411-1 V1.1.1 (2016-02) ETSI EN 319 411-2 V2.1.1 (2016-02)
Qualified certificate for website authentication (Article 45 of the eIDAS Regulation, (EU) No. 910/2014 – refers)
ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 411-1 V1.1.1 (2016-02) ETSI EN 319 411-2 V2.1.1 (2016-02)
Qualified electronic time stamps (Article 42 of the eIDAS Regulation, (EU) No. 910/2014 – refers)
ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 421 V1.1.1 (2016-03)
MCS PRODUCT CERTIFICATION MCS Scheme Requirements: (DECC)
Solar Collectors MCS 004 Solar Photovoltaic Panels MCS 005 Micro and Small Wind Turbines MCS 006 Heat Pumps MCS 007 Heating Appliances Fired by Biomass MCS 008 Generic Factory Production Control MCS 010 Testing and Acceptance Criteria MCS 011 Pitched Roof Installation Kits. MCS 012 Heat-led micro CHP systems MCS 014 Electricity-led micro CHP systems MCS 015 Bespoke Building Integrated Photovoltaic Products MCS 017
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 22 of 120
Product Standard
HOUSEHOLD OR SIMILAR GAS APPLIANCES Cooking Appliances including Independent Hotplates, Barbecues and Ovens
BS EN 30-1-1:2008 BS EN 30-1-4:2002 BS EN 30-2-1:1998 BS EN 30-1-2:1999 BS EN 30-1-3:2002 BS EN 30-2-2:1999 BS EN 498:1998 BS EN 484:2019 AS 4551:2008 AS 4557:2004 ANSI Z21.1:2005 AS/NZS 5263.0:2017 AS/NZS 5263.1.1:2016 AS/NZS 5263.1.7:2016
Natural Gas Barbecues for Outdoor Use TP 6.9 (Internal Certification Procedure) Heat Storage Cookers TP 6.10 (Internal Certification Procedure) Flueless Heat Storage Cookers TP 6.15 (Internal Certification Procedure) Gas Ovens for Household Use BS EN 15181:2008 Central Heating Boilers and Circulators BS EN 297:1994
BS EN 483:1999 BS EN 625:1996 BS EN 677:1998 AS 4560:2004
Fuel Cell Heating Appliances BS EN 50465:2008 Combined Fire/Back Boiler or Circulator BS 7977-2:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 23 of 120
Product Standard
HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)
Water Heaters BS EN 26:1998 (inc. A1, A2 and A3)
BS EN 89:2000 BS EN 15033:2006 AS 4552:2005
AS/NZS 5263.0:2017 AS/NZS 5263.1.2:2016
Instantaneous Water Heaters > 45 kW TP 6.3 (Internal Certification Procedure) Instantaneous Condensing Water Heaters TP 6.4 (Internal Certification Procedure) Instantaneous Condensing Water Heaters for Outdoor Use
TP 6.5 (Internal Certification Procedure)
Gas-Fired Appliances Producing Hot Water - Assessment of Energy Consumption
BS EN 13203-2:2006
Gas Fires and Space Heaters BS EN 509:2000
BS EN 613:2001 BS EN 1266:2002 BS 7977-1:2009 BS EN 13278:2003 AS 4553:2008 AS/NZS 5263.0:2017 AS/NZS 5263.1.3:2016
Space Heaters (EN 613) appliances with C31 Flues TP 6.13 (Internal Certification Procedure) Space Heaters (EN 613) appliances for unattended operation
TP 6.14 (Internal Certification Procedure)
Flueless Heaters BS EN 14829:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 24 of 120
Product Standard
HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)
Flueless LPG Space Heaters BS EN 449:2002
Excluding catalytic heaters Air Heaters BS EN 778:2009
BS EN 1196:1998 BS EN 1319:2009 BS 5258:Part 9:1989 BS 6332:Part 6:1990
LPG Absorption Refrigerators BS EN 732:1999
AS 4555:2002 + A1:2011 Portable Vapour Pressure LPG Appliances BS EN 521:2019
AS 2658:2008 Portable Gas Cookers using non-refillable gas canisters
TP 6.20 (Internal Certification Procedure)
Tumble Dryers BS EN 1458-1:2000 Flueless Patio Heaters BS EN 14543:2005 Decorative Open Flame Appliances for Outdoor Use TP 6.24 (Internal Certification Procedure) Room Sealed LPG Space Heaters for Vehicles and Boats
BS EN 624:2000 excluding appliances for vehicles in motion
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 25 of 120
Product Standard
COMMERCIAL GAS HEATED CATERING EQUIPMENT
BS EN 203-1:2005 BS EN 203-2-1:2005 BS EN 203-2-2:2006 BS EN 203-2-3:2005 BS EN 203-2-4:2005 BS EN 203-2-6:2005 BS EN 203-2-7:2007 BS EN 203-2-8:2005 BS EN 203-2-9:2005 BS EN 203-2-10:2007 BS EN 203-2-11:2006 AS 4563:2004
Professional Catering Barbecues TP 6.19 (Internal Certification Procedure) Hog/Pig Roasters TP 6.21 (Internal Certification Procedure) COMMERCIAL GAS APPLIANCES Overhead Radiant Heaters BS EN 416-1:2009
BS EN 416-2:2006 BS EN 419-1:2009 BS EN 419-2:2006 BS EN 777-1:2009 BS EN 777-2:2009 BS EN 777-3:2009 BS EN 777-4:2009
Gas Radiant Heaters for Outdoor Use TP 6.22 (Internal Certification Procedure) LPG Space Heaters BS EN 461:1999
BS EN 1596:1998 Heating Boilers - Forced Draught BS EN 303-1:1999 Boiler Body and Forced Draught Burners BS EN 303-3:1999
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 26 of 120
Product Standard
COMMERCIAL GAS APPLIANCES (cont’d) Hot Water Boilers BS EN 656:2000
BS 5978:Part 1:1989 BS 5978:Part 2:1989 BS 5978:Part 3:1989 BS EN 13836:2006 BS EN 15417:2006 prEN 15420:Jan 2006
Air Heaters BS 5990:2006
BS 5991:2006 BS EN 525:2009 BS EN 1020:2009 BS EN 12669:2000 BS EN 621:2009
Tumble Dryers BS EN 12752-1:1999
AS 4554:2005 Commercial Dryers > 20 kW TP 6.8 (Internal Certification Procedure) GAS CARRYING CONTROLS Manually Operated Ball Valves BS EN 331:1998 Ball Valve Families 2”-4” TP 6.7 (Internal Certification Procedure) Taper Plug Valves BS 1552:1995 Automatic Shut-Off Valves BS EN 161:2007
AS 4629:2005 Pressure Governors BS EN 88-1:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 27 of 120
Product Standard
GAS CARRYING CONTROLS (cont’d) Distribution Valves GIS/V7 Part 3:2008 Multifunction Gas Controls BS EN 126:2004 Flame Supervision Devices BS EN 125:1991
BS 6047:Part 1:1981 Gas Taps BS EN 1106:2001
AS 4617: 2018 Safety and Control Devices BS EN 13611:2019 Meter Connectors IGEM/GM/PRS/6:2016 Normally Open (Vent) Valves TP 6.16 (Internal Certification Procedure) LPG Regulators BS EN 12864:2001 Thermostats BS EN 257:1992 Gas/Air Ratio Controls BS EN 12067-1:1999 ANCILLIARIES RELATING TO GAS EQUIPMENT Flue Pipes and Accessories BS EN 1856-1:2003 Flexible Hoses & Connection Valves BS 669:Part 1:1989
BS 669:Part 2:1997 BS EN 15069:2008 BS EN 14800:2007 BS EN 15266:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 28 of 120
Product Standard
ANCILLIARIES RELATING TO GAS EQUIPMENT (cont’d)
Diaphragm Gas Meters BS EN 1359:1999 System Chimneys with Plastic Flue Liners BS EN 14471:2005 Flue Blocks and Masonry Terminals BS EN 13502:2002 ELECTRICAL APPARATUS Household and Similar Electrical Appliances
Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Safety Act 2011 (ProdSG)
Household and Similar Electrical Appliances BS EN 60335-1:2002#
BS EN 60335-1:2012 + A13:2017# AS/NZS 60335.1:2002#
Cooking Ranges and Ovens BS EN 60335-2-6:2003#
AS/NZS 60335.2.6:2008# Washing Machines BS EN 60335-2-7:2010# Tumble Dryers BS EN 60335-2-11:2010 + A1:2015# 1) Excluding Tumble Dryers with water connections
2) Excluding flammable refrigerants & non-sparking ‘n’ class electrical appliances
Appliances for Heating Liquids BS EN 60335-2-15:2002# Storage Water Heaters BS EN 60335-2-21:2003# Refrigerating Appliances BS EN 60335-2 24:2010#
AS/NZS 60335.2.24:2002# Absorption Type Refrigerators only
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 29 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Household and Similar Electrical Appliances (cont’d)
Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Safety Act 2011 (ProdSG)
Room Heaters BS EN 60335-2-30:2009 + A11:2012# Excluding oil filled radiators Instantaneous Water Heaters BS EN 60335-2-35:2003#
BS EN 60335-2-35:2016 + A1:2019# Commercial Electric Cooking Ranges and Ovens BS EN 60335-2-36:2002# Commercial Deep Fat Fryers BS EN 60335-2-37:2002# Commercial Griddles BS EN 60335-2-38:2003# Commercial Electric Multi-Purpose Cooking Pans BS EN 60335-2-39:2003# Electric Heat Pumps BS EN 60335-2-40:2003# Excluding flammable refrigerant type Pumps BS EN 60335-2-41:2003 + A2:2010 Commercial Convection Ovens, Steam Cookers, And Steam-Convection Ovens
BS EN 60335-2-42:2003#
Commercial Steam Cookers BS EN 60335-2-46:1989# Commercial Grillers and Toasters BS EN 60335-2-48:2003# Hot Cupboards BS EN 60335-2-49:2003#
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 30 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Household and Similar Electrical Appliances (cont’d)
Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Safety Act 2011 (ProdSG)
Outdoor Electric Barbecues BS EN 60335-2-78:2003# Fans BS EN 60335-2-80:2003# Gas, Oil & Fuel Burning Appliances Having Electrical Connections
BS EN 60335-2-102:2006 + A2:2016# AS/NZS 60335.2.102:2004#
Electrical Apparatus for CO Detection BS EN 50291-1:2010#
BS EN 50291-2:2010# Audio/video, information and communication technology equipment
BS EN 62368-1:2014 +A11:2017 limited to: PCB Material Clause 6.4.5 – Control of Fire Spread in PS2 Circuits Optocouplers Clause 5.4 – Insulation Materials and Requirements Clause 5.5 – Components as Safeguards Clause 6.4.5 – Control of Fire Spread in PS2 Circuits Relays Clause 5.4 – Insulation Materials and Requirements Clause 5.5 – Components as Safeguards Clause 6.4.5 – Control of Fire Spread in PS2 Circuits
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 31 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Controls and Components
Automatic Electrical Controls for Household and Similar Use
BS EN 60730-1:2016 + A1:2019
Automatic Electrical Controls for Electrical Household Appliances
BS EN 60730-2-1:1997
Automatic Electrical Controls: Temperature Sensing Controls
BS EN 60730-2-9:2019 + A1:2019
Luminaires Control Gear Luminaires. General requirements and tests. BS EN 60598-1:2015 + A1:2019
AS/NZS 60598.1:2017 Luminaires - Particular requirements. Specification for fixed general purpose luminaires.
BS 4533-102.1:1990 EN 60598-2-1:1989 AS/NZS 60598.2.1:2014 + A1 2016
Luminaires - Particular requirements. Luminaires for recessed luminaires
AS/NZS 60598.2.2:2016 + AMD 1
Luminaires - Particular requirements. Recessed Luminaires
BS EN 60598-2-2:2012
Luminaires - Particular requirements. Luminaires for road and street lighting.
BS EN 60598-2-3:2003 + A1:2011 AS/NZS 60598.2.3:2015
Luminaires - Particular requirements. Portable general purpose luminaires.
BS EN 60598-2-4:1998
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 32 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Luminaires Control Gear (cont’d) Luminaires - Particular requirements. Floodlights.
BS EN 60598-2-5:1998 (withdrawn) BS EN 60598-2-5:2015 AS/NZS 60598.2.5:2002
Luminaires - Particular requirements. Luminaires with built-in transformers for filament lamps.
BS EN 60598-2-6:1995
Luminaires - Particular requirements. Specification for air-handling luminaires (safety requirements).
BS 4533-102.19:1990 EN 60598-2-19:1989
Luminaires - Particular requirements. Luminaires for emergency lighting.
BS EN 60598-2-22:2014 AS/NZS 60598.2.22:2005 IEC 60598-2-22:2014 + A1:2017
Central power supply systems. BS EN 50171:2001 Automatic test systems for battery powered emergency escape lighting
BS EN 62034:2012
Luminaires Electrical supply track systems for luminaires. BS EN 60570:2003 Lamp Control Gear. General & safety requirements. BS EN 61347-1: 2008 (withdrawn)
BS EN 61347-1:2015 AS/NZS 61347.1:2016 + A1:2018
Particular Requirements for starting devices (other than glow starters).
EN 61347-2-1: 2001
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 33 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Luminaires (cont’d) Particular requirements for dc or ac supplied electronic step-down converters for filament lamps.
EN 61347-2-2: 2012
Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps.
EN 61347-2-3: 2011
Particular requirements for battery supplied electronic control gear for emergency lighting (self-contained).
BS EN 61347-2-7: 2012
Particular requirements for ballasts for fluorescent lamps.
BS EN 61347-2-8: 2001
Particular requirements for electromagnetic control gear for discharge lamps (excluding fluorescent lamps).
BS EN 61347-2-9: 2013
Particular requirements for miscellaneous electronic circuits used with luminaires.
BS EN 61347-2-11: 2002 + A1:2019 AS/NZS 61347.2.11:2003
Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps).
BS EN 61347-2-12: 2005
Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules.
BS EN 61347-2-13: 2014 + A1:2017 AS/NZS IEC 61347.2.13:2013
Ballasts for tubular fluorescent lamps. Performance requirements.
BS EN 60921: 2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 34 of 120
Product Standard
ELECTRICAL APPARATUS (cont’d) Luminaires (cont’d) Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements.
BS EN 60923: 2005
Glow-starters for fluorescent lamps BS EN 60155: 1995 SAFETY RELATED ELECTRONIC CONTROLS Automatic Gas Burner Control Systems BS EN 298:2003 (excluding UV detectors & Type B
Battery Operated equipment) ANSI Z21.20:2007
Electronic Flame Safeguards & Flame Detectors AS 4625:2008 (R2016) Control Functions in Electronic Systems for Gas Burners and Appliances
BS EN 14459:2007
Automatic Burner Control Systems for Oil Burners BS EN 230:2005 Safety & Control Devices for Gas Burners ISO 23550:2004 Gas/Air Ratio Controls BS EN 12067-2:2004 Fuel/Air Ratio Controls for Gas/Oil Appliances ISO 23552-1:2007 Kitchen Extract Control Systems TP 6.1 (Internal Certification Procedure) Gas Proving Control Systems TP 6.2 (Internal Certification Procedure)
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 35 of 120
Product Standard ELECTRICAL WIRING ACCESSORIES
Rewireable and Non-Rewireable Plugs BS 1363-1:1995 + A4:2012
BS 1363-1:2016 + A1:2018 Switched and unswitched socket-outlets BS 1363-2:2016 +A1:2018 Adaptors BS 1363-3:2016 +A1:2018 Fused Connection units, switched and unswitched BS 1363-4:2016 +A1:2018 Fused Conversion Plugs BS 1363-5:2016
ANCILLIARIES RELATING TO ELECTRICAL EQUIPMENT
Conduit Systems for Cable Management - General BS EN 61386-1:2008 + A1:2019 Conduit Systems for Cable Management - Rigid Conduit Systems
BS EN 61386-21:2004 + A11:2010
Conduit Systems for Cable Management - Pliable Conduit Systems
BS EN 61386-22:2004 + A11:2010
Conduit Systems for Cable Management - Flexible Conduit Systems
BS EN 61386-23:2004 + A11:2010
Conduit Systems for Cable Management - Conduit Systems Buried Underground
BS EN 61386-24:2010
Conduit Systems for Cable Management - Conduit Fixing Devices
BS EN 61386-25-2011
Cable Tray Systems and Cable Ladder Systems BS EN 61537:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 36 of 120
Product Standard
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 676:2003
UNVENTED HOT WATER STORAGE SYSTEMS TP 6.12 (Internal Certification Procedure) (based on BS 7206:1990 and G3 Building Regulations)
COAL-FIRED APPLIANCES
Charcoal Barbecues BS EN 1860-1:2003
OIL FIRED APPLIANCES
Atomising Heating Boilers BS EN 304:1992 Condensing Heating Boilers for Fuel Oil BS EN 15034:2006 Oil Fired Room Sealed Units up to 70 kW BS EN 15035:2006
GAS APPLIANCE SAFETY (NEW ZEALAND)
Gas appliances as listed in the following sections of this schedule:
Household or similar gas appliances
Commercial gas heated catering equipment
Commercial gas appliances
Automatic forced draught burners for gaseous fuels
NZS 5262:2003
GAS APPLIANCE SAFETY (SOUTH AFRICA)
Gas appliances as listed in the following sections of this schedule:
Household or similar gas appliances
Commercial gas heated catering equipment
Commercial gas appliances
Automatic forced draught burners for gaseous fuels
SANS 1539:2008
END
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 37 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020.
FPC Certification Body (System 2+)
95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).
EN 12446:2003 EN 12446:2011 EN 13063-1:2005+A1:2007 EN 13069:2005 EN 13084-5:2005 EN 13084-5:2005/AC:2006 EN 13084-7:2005 EN 13084-7:2005/AC:2009 EN 14471:2005 EN 1457-1:2012 EN 1457-2:2012 EN 1806:2006 EN 1856-1:2009 EN 1856-2:2009 EN 1857:2010 EN 1858:2008 EN 1858:2008+A1:2011
Product Certification Body (System 1)
95/467/EC Structural bearings (1/1) : - Structural bearings (in buildings and civil engineering works where requirements on individual bearings are critical).
EN 1337-3:2005 EN 1337-4:2004 EN 1337-4:2004/AC:2007 EN 1337-5:2005 EN 1337-6:2004 EN 1337-7:2004 EN 1337-8:2007
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry powder systems-kits (fire safety).
EN 12416-1:2001 EN 12416-1:2001/A1:2004 EN 12416-2:2001
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 38 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - First aid hose systems-kits (fire safety). EN 671-1:2001
EN 671-1:2001/AC:2002 EN 671-2: 2001 EN 671-2:2001/A1:2004
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).
EN 12101-2:2003 EN 12101-3:2002 EN 12101-3:2002/AC:2005 EN 12101-3:2015
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety).
EN 12094-9:2003 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety).
EN 12094-12:2003 EN 14604:2005 EN 14604:2005/AC:2008 EN 54-23:2010 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire control components) (fire safety).
EN 12101-10:2005 EN 12101-10:2005/AC:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 39 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke curtains (fire safety).
EN 12101-1:2005 EN 12101-1:2005/A1:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Check valves and non-return valves (fire safety).
EN 12094-13:2001 EN 12094-13:2001/AC:2002
96/577/EC Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Mechanical weighing devices (fire safety).
EN 12094-11:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure gauges and pressure switches (fire safety).
EN 12094-10:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Non-electrical disable devices (fire safety).
EN 12094-2:2003 EN 12094-6:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Selector valves and their actuators (fire safety).
EN 12094-4:2004 EN 12094-5:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 40 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Multiple controls (fire safety)
EN 12094-3:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire hydrants (fire safety)
EN 14339:2005 EN 14384:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).
EN 54-11:2001/A1:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety)
EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).
EN 54-17:2005 EN 54-17:2005/AC:2007
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Nozzles/sprinklers/outlets (fire safety)
EN 12094-7:2000 EN 12094-7:2000/A1:2005 EN 12259-1:1999 + A1:2001 EN 12259-1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 41 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Flexible connectors (fire safety).
EN 12094-8:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - High pressure container valve assemblies and their actuators (fire safety).
EN 12094-4:2004 EN 12094-5:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry alarm valve assemblies (fire safety).
EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Wet alarm valve assemblies (fire safety).
EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Water flow detectors/switches (fire safety)
EN 12259-5:2002
96/577/EC Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure differential systems-kits (fire safety).
EN 12101-6:2005 EN 12101-6:2005/AC:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 42 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety).
EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety).
EN 12094-1:2003 EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/AC:1999
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Sprinklers and water spray systems-kits (fire safety).
EN 12259-4:2000/A1:2001
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety).
EN 13565-1:2003 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety).
EN 54-21:2006
Product Certification Body (System 1+)
2011/284/EU Power, control and communication cables (1/3):- Power, control and communication cables (for uses subject to regulations on reaction to fire)
EN 50575:2014 + A1:2016
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 43 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/579/EC Circulation fixtures (1/2) : - Road marking products: retroreflecting road studs (for circulation area).
EN 1463-1:2009
96/579/EC Circulation fixtures (1/2) : - Road lighting columns (for circulation areas).
EN 40-4:2005 EN 40-4:2005/AC:2006 EN 40-5:2002 EN 40-6:2002 EN 40-7:2002
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas).
EN 12966-1:2005+A1:2009
96/579/EC Circulation fixtures (1/2) :
- Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent traffic signs (for circulation areas).
EN 12899-1:2007
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas).
EN 12352:2006 EN 12899-3:2007
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas).
EN 12368:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 44 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
96/579/EC Circulation fixtures (1/2) : - Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas).
EN 1423:1997/A1:2003 EN 1423:2012 EN 1463-1:2009
96/579/EC Circulation fixtures (1/2) : - Vehicle restraint barriers: transition barriers (for circulation areas).
EN 1317-5:2007+A1:2008 EN 1317-5:2007+A2:2012
96/579/EC Circulation fixtures (1/2) :
- Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic bollards (for circulation areas).
EN 12899-2:2007
Test Laboratory
(System 3) 96/579/EC Circulation fixtures (2/2) : - Road traffic noise reducing devices and barriers (for circulation areas).
EN 14388:2005 EN 14388:2005/AC:2008
96/580/EC Curtain wallings (1/1) : -
Curtain wall kits (as external walls not subject to reaction to fire requirements), Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Product
Certification Body (System 1)
96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 45 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for drainage and/or filtration (in roads, railways, foundations and walls, drainage systems, erosioncontrol, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as fluid or gas barriers (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15382:2008
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 46 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+) (cont’d)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for reinforcement (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 47 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+) (cont’d)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as protective layer (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13254:2000 EN 13254:2000/A1:2005 EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005
97/176/EC Structural timber products (1/3) : - Solid structural timber products; Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings).
EN 14250:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 48 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+) (cont’d)
97/176/EC Structural timber products (1/3) : - Solid structural timber products: Elements (bridge elements, truss elements, sleepers, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (bridges, railtracks and buildings).
EN 14081-1:2005+A1:2011 EN 14250:2010
Product Certification Body (System 1)
97/176/EC Structural timber products (2/3) : - Structural glued laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) (for bridges and buildings).
EN 14080:2005
97/176/EC Structural timber products (2/3) : - Structural glued laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (for bridges and buildings).
EN 14080:2005 EN 14374:2004
FPC Certification Body (System 2+)
97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications).
EN 13986:2004 +A1:2015
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 49 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1)
97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external application).
EN 13986:2004 +A1:2015
Test Laboratory (System 3)
97/464/EC Waste water engineering products outside buildings (2/3) : - Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads).
EN 1433:2002 EN 1433:2002/A1:2005
Product Certification Body (System 1+)
97/555/EC Cements, building limes and other hydraulic binders : - Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 413-1:2004 EN 413-1:2011
97/555/EC Cements, building limes and other hydraulic binders :- Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14216:2004 EN 197-1:2000 EN 197-1:2000/ A1:2004 EN 197-1:2000/A3:2007 EN 197-1:2011
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 50 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2)
97/555/EC Cements, building limes and other hydraulic binders : - Building limes, including: -Calcium limes -Dolomitic limes, -Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 459-1:201
FPC Certification Body (System 2+)
97/555/EC Cements, building limes and other hydraulic binders : - Rapid hardening hydraulic road binders (preparation of concrete, mortar, grout and other mixes for road bases stabilisation)
EN 13282-1:2013
Product Certification Body (System 1+)
97/555/EC Cements, building limes and other hydraulic binders : - Calcium aluminate cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14647:2005 EN 14647:2005/AC:2006
97/555/EC Cements, building limes
and other hydraulic binders : - Special cements, including: -low heat cements, -sulfate resisting cement, -white cement, -sea water resisting cement, -low alkali cement (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14216:2004 EN 15743:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 51 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+)
97/740/EC Masonry and related products (1/3) : - Factory-made, designed masonry mortars (in walls, columns and partitions).
EN 998-2:2016
97/740/EC Masonry and related
products (1/3) : - Masonry units category I (in walls, columns and partitions).
EN 771-1:2011 + A1:2015 EN 771-2:2011 EN 771-3:2011 + A1:2015 EN 771-4:2011 + A1:2015 EN 771-5:2011 + A1:2015 EN 771-6:2011
Product Certification Body (System 1)
97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).
EN 14041:2004 EN 14041:2004/AC:2006
97/808/EC Floorings (2/2) : - Floor screed materials (for internal uses).
EN 13454-1:2004 EN 13813:2002
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 52 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+)
98/214/EC Structural metallic products and ancillaries (1/4) : - Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures).
EN 10025-1:2004 EN 10219-1:2006 EN 15088:2005
98/214/EC Structural metallic products and ancillaries (3/4) : - Welding materials (for uses in structural metallic works).
EN 13479:2004
98/214/EC Structural metallic products and ancillaries (4/4) : - Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).
EN 14399-1:2005
Test Laboratory (System 3)
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Roof access systems, walkways and footholds (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).
EN 12951:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 53 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3) (cont’d)
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Rooflights (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).
EN 1873:2005
98/437/EC Internal and external wall
and ceiling finishes (1/5) : - Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).
EN 13964:2004 EN 13964:2004/A1:2006
Product Certification Body (System 1)
98/437/EC Internal and external wall and ceiling finishes (3/5): - Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
EN 13964:2004 EN 13964:2004/A1:2006
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).
EN 14716:2004
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 438-7:2005
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 54 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+)
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates for bituminous mixtures and surface treatments (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Armourstones (for hydraulic structures and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 55 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+) (cont’d)
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Railway ballast (for railway works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 56 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
FPC Certification Body (System 2+) (cont’d)
98/601/EC Road construction products (1/2) : - Bituminous mixtures (for road construction and surface treatment of roads).
EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN 13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008
98/601/EC Road construction products (1/2) : - Bitumen (for road construction and surface treatment of roads).
EN 12591:2009 EN 13808:2005 EN 13924:2006 EN 13924:2006/AC:2006 EN 14023:2010
98/601/EC Road construction products (1/2) : - Surface treatments (for surface treatments of roads).
EN 12271:2006 EN 12273:2008
98/601/EC Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).
EN 14695:2010
99/90/EC Membranes (1/3) : - Roof sheets (in buildings).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (1/3) : - Damp proofing sheets (in buildings).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 57 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3)
99/90/EC Membranes (1/3) : - Water vapour control layers (in buildings).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (1/3) : - Roof underlays (in buildings).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (1/3) : - Damp proof courses (in buildings).
EN 14909:2006 EN 14967:2006
Product Certification Body (System 1)
99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2006 EN 14967:2006
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 58 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3)
99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2006 EN 14967:2006
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 59 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1)
99/91/EC Thermal insulating products (2/2) : - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2012 + A1:2015 EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009 + A1:2013 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004 EN 14317-1:2004
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 60 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Calculation body Test Laboratory (System 3)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes).
EN 13241-1:2003 EN 13241-1:2003+A1:2011 EN 14351-1:2006+A1:2010
Product Certification Body (System 1)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes).
EN 14351-1:2006 + A1:2010 EN 14351-1:2006 + A2:2016 EN 16034:2014
Calculation body Test Laboratory (System 3)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other).
EN 14351-1:2006+A1:2010
Product Certification Body (System 1)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Fibres (for structural uses in concrete, mortar and grout).
EN 14889-1:2006 EN 14889-2:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 61 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1+)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (Type II) (for concrete, mortar and grout)
EN 450-1:2012
FPC Certification Body (System 2+)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Concrete protection and repair products (for other uses in buildings and civil engineering works).
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004 EN 1504-5:2004 EN 1504-6:2006 EN 1504-7:2006
99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (type I) (for concrete, mortar and grout).
EN 12878:2005 EN 12878:2005/AC:2006
99/469/EC Products related to
concrete, mortar and grout (1/2) : - Admixtures (for concrete, mortar and grout)
EN 934-2:2009 + A1:2012 EN 934-3:2009 + A1:2012
Test Laboratory
(System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 1057:2006+A1:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 62 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3) (cont’d)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Fittings, adhesives, joints, joint sealings and gaskets (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 682:2002 EN 682:2002/A1:2005
Product Certification Body (System 1)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building), Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).
EN 1057:2006+A1:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 63 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).
EN 1057:2006+A1:2010
Product Certification Body (System 1)
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1279-5:2005+A2:2010
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).
EN 1279-5:2005+A2:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 64 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) (cont’d)
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Test Laboratory (System 3)
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for other uses liable to present "safety-in-use" risks and subject to such regulations).
EN 1279-5:2005+A2:2010
2000/245/EC Flat glass, profiled
glass and glass-block products (4/6) : - Flat or curved glass panels (for other uses liable to present "safety-in-use" risks and subject to such regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Insulating glass units (for uses relating to energy conservation and/or noise reduction).
EN 1279-5:2005+A2:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 65 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Test Laboratory (System 3) (cont’d)
2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Flat or curved glass panels (specially treated) (for uses 2 relating to energy conservation and/or noise reduction).
EN 14179-2:2005
Product Certification Body (system 1) Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :- Valves and taps (in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 331:1998 EN 331:1998/A1:2010
FPC Certification Body (System 2+)
95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).
EN 416-1:2009 EN 621:2009 EN 777-1:2009 EN 777-2:2009 EN 777-3:2009 EN 777-4:2009 EN 778:2009 EN 1020:2009 EN 1319:2009
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 66 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Product Certification Body (System 1) Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 14800:2007 EN 15069:2008
FPC Certification
Body (System 2+)
99/94/EC Precast normal/lightweight/autoclaved aerated concrete products (1/1) : - Precast normal/lightweight/autoclaved aerated concrete products (for structural use).
EN 1168:2005 + A3:2011 EN 12737:2004+A1:2007 EN 12794:2005 + A1:2007 EN 13224:2004+A1:2007 EN 13225:2013 EN 14843:2007 EN 14844:2006+A2:2011 EN 14991:2007 EN 14992:2007 EN 15037-1:2008 EN 15037-2:2009 + A1:2011 EN 15037-4:2010 EN 15050:2007 EN 15258:2008 EN 15435:2008 EN 15498:2008
Annex V
FPC Certification Body System 2+)
98/214/EC Structural metallic products and ancillaries (2/4)
EN 1090-1:2009 EN 1090-1:2009/AC:2010 EN 1090-1:2009+A1:2011
Mutual Recognition Agreements between the UK and Australia/New Zealand
Conformity Assessment Body
Low Voltage Products Designation as a CAB in accordance with Chapter 1 of the MRA
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 67 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425 as brought into UK law and amended) and the Personal Protective Equipment (Enforcement) Regulations 2018
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
PPE Product Types: Equipment Providing Buoyancy aid Equipment Providing Chest and Groin protection Equipment for eye protection Equipment Providing Face protection Equipment for leg and/or foot and anti-slip protection Equipment Providing General Body protection (Clothing) Equipment Providing Hand and Arm protection Equipment for Head protection Equipment for Hearing protection Equipment Providing Respiratory System protection Providing Protection Against: Equipment Providing Protection against Cold [> -50 °C] Equipment Providing Protection against Cold [cold > -50 °C] [extreme cold < -50 °C] Equipment Providing Protection against Cold [extreme cold < -50 °C] Equipment Providing Protection against Heat [< 100 °C] Equipment Providing Protection against Heat [> 100 °C and Fire and Flame]
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 68 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425 as brought into UK law and amended) and the Personal Protective Equipment (Enforcement) Regulations 2018 (cont’d.)
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
Equipment Providing Protection against Heat [< 100 °C] [> 100 °C and Fire] Protective equipment against Bullet wounds or knife stabs Protective Equipment against Drowning Protective Equipment against Electric Shock Protective Equipment against Electrical and Magnetic Fields and Waves Protective Equipment against Falls from Heights Protective Equipment against Hand-held Chain-saws Protective Equipment against Harmful Biological Agents Protective Equipment against Harmful Noise Protective Equipment against Ionising Radiation Protective Equipment against Mechanical Risks Protective Equipment against Non-ionising Radiation Protective Equipment against Slipping Protective Equipment against Static Compression
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 69 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425 as brought into UK law and amended) and the Personal Protective Equipment (Enforcement) Regulations 2018 (cont’d.)
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
Protective Equipment against Substances and Mixtures which are Hazardous to Health Protective Equipment against Vibrations Protective Equipment against risks arising from a sports activity Specialised Area of Competence: Protective clothing against static electricity Specialised Area of Competence: Protective clothing for use in welding and allied processes Specialised Area of Competence: Firefighters suits Specialised Area of Competence: High Visibility Clothing Specialised Area of Competence: Protective Clothing for Motorcycle Riders Specialised Area of Competence: Protective Equipment for Diving Specialised Area of Competence: Protective Equipment for use in Potentially Explosive Atmospheres
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 70 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Pressure Equipment (Safety) Regulations 2016
Directive: Article 14: Annex III
Regulation 42.
Conformity Assessment
Modules
A2, B, C2, D, D1, E, E1, F, G, H,
H1
All descriptions of pressure equipment and assemblies covered by the Regulations in relation to the conformity assessment modules
Inspection Body Procedures PP250
Directive: Annex
I – 3.1.2 Regulations: Schedule 2
paragraph 21.
Categories II III and IV Approval of permanent joining procedures and personnel **
Inspection Body Procedures PP250
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 71 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Measuring Instruments Regulations 2016
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex IX (MI-007) of the directive
Taximeters Annex IX (MI-007)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 72 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Measuring Instruments Regulations 2016 (cont’d)
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex III (MI-001) of the directive
Water meters Annex III (MI-001)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 73 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Measuring Instruments Regulations 2016 (cont’d)
Declaration of Conformity
Based on Full Quality
Assurance plus Design
Examination Annex H1
All instruments as defined in Annex IV (MI-002) of the directive
Gas meters and volume conversion devices Annex IV (MI-002)
EC Type
Examination Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 74 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Measuring Instruments Regulations 2016 (cont’d)
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex V (MI-003) of the directive
Active Electrical Energy Meters Annex V (MI-003)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 75 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018
Annex III.1 Module B: EU Type-
Examination
Annex III.2 Module C2: Conformity to
Type Based on internal production
control
Annex III.3 Module D: Conformity to Type
Based on QA of the production process
Annex III.4 Module E:
Conformity to type based on Product QA
Annex III.5
Conformity to type based on Product
Verification
Annex III.6 Conformity based on unit
Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting, and washing; forced draught burners, and heating bodies to be equipped with such burners Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 76 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
The Merchant Shipping (Marine Equipment) Regulations 2016
Chapter 4, Article 15 & Annex II* Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification Module G: EC Unit Verification
Life Saving Appliances MED 1 / 1.2b, 1.2c*
* In accordance with Implementing Acts (Article 35(2)) & Commission Regulation 2018/773/EU - (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
Fire Protection MED 1 / 3.1, 3.2, 3.7, 3.18b, 3.18c, 3.18e, 3.21, 3.29, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.53, 3.55, 3.56, 3.70, 3.71* Other Safety Equipment MED/7.1
Location: Milton Keynes Note: The inspection of items marked thus * are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 77 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Radio Equipment Regulations 2017
EU-type examination (Annex III) Conformity Based on Full Quality Assurance (Annex IV)
Fixed Link Fixed Wireless Access Industrial, Scientific and Medical within the scope of the directive Mobile (Cellular) Telephone Handsets Paging (Radio Messaging) Private/Professional Mobile Radio Radio equipment operating below 9KHz Radio Frequency Identification (RFID) Radio Local Area Network Radio receivers (including broadcast radio and TV receivers) Short Range Devices TTE for fixed (wired) network (all types) Ultra-Wideband Applications Wireless Microphones Wireless Telephones
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 78 of 120
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Boiler (Efficiency) Regulations 1993
Module B (Annex III): EC type-examination Module C (Annex IV): Conformity to type Module D (Annex IV): Production quality assurance Module E (Annex IV): Product quality assurance
Hot-water boilers fired with liquid or gaseous fuels with a rated output of no less than 4 kW and no more than 400 kW
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 79 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
FPC Certification Body (System 2+)
95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).
EN 12446:2003 EN 12446:2011 EN 13063-1:2005+A1:2007 EN 13069:2005 EN 13084-5:2005 EN 13084-5:2005/AC:2006 EN 13084-7:2005 EN 13084-7:2005/AC:2009 EN 14471:2005 EN 1457-1:2012 EN 1457-2:2012 EN 1806:2006 EN 1856-1:2009 EN 1856-2:2009 EN 1857:2010 EN 1858:2008 EN 1858:2008+A1:2011
Product Certification Body (System 1)
95/467/EC Structural bearings (1/1) : - Structural bearings (in buildings and civil engineering works where requirements on individual bearings are critical).
EN 1337-3:2005 EN 1337-4:2004 EN 1337-4:2004/AC:2007 EN 1337-5:2005 EN 1337-6:2004 EN 1337-7:2004 EN 1337-8:2007
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry powder systems-kits (fire safety).
EN 12416-1:2001 EN 12416-1:2001/A1:2004 EN 12416-2:2001
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 80 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - First aid hose systems-kits (fire safety). EN 671-1:2001
EN 671-1:2001/AC:2002 EN 671-2: 2001 EN 671-2:2001/A1:2004
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).
EN 12101-2:2003 EN 12101-3:2002 EN 12101-3:2002/AC:2005 EN 12101-3:2015
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety).
EN 12094-9:2003 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety).
EN 12094-12:2003 EN 14604:2005 EN 14604:2005/AC:2008 EN 54-23:2010 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire control components) (fire safety).
EN 12101-10:2005 EN 12101-10:2005/AC:2007
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 81 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke curtains (fire safety).
EN 12101-1:2005 EN 12101-1:2005/A1:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Check valves and non-return valves (fire safety).
EN 12094-13:2001 EN 12094-13:2001/AC:2002
96/577/EC Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Mechanical weighing devices (fire safety).
EN 12094-11:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure gauges and pressure switches (fire safety).
EN 12094-10:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Non-electrical disable devices (fire safety).
EN 12094-2:2003 EN 12094-6:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Selector valves and their actuators (fire safety).
EN 12094-4:2004 EN 12094-5:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 82 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Multiple controls (fire safety)
EN 12094-3:2003
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire hydrants (fire safety)
EN 14339:2005 EN 14384:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).
EN 54-11:2001/A1:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety)
EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).
EN 54-17:2005 EN 54-17:2005/AC:2007
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Nozzles/sprinklers/outlets (fire safety)
EN 12094-7:2000 EN 12094-7:2000/A1:2005 EN 12259-1:1999 + A1:2001 EN 12259-1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 83 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Flexible connectors (fire safety).
EN 12094-8:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - High pressure container valve assemblies and their actuators (fire safety).
EN 12094-4:2004 EN 12094-5:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry alarm valve assemblies (fire safety).
EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Wet alarm valve assemblies (fire safety).
EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Water flow detectors/switches (fire safety)
EN 12259-5:2002
96/577/EC Fire alarm/detection,
fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure differential systems-kits (fire safety).
EN 12101-6:2005 EN 12101-6:2005/AC:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 84 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety).
EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety).
EN 12094-1:2003 EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/AC:1999
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Sprinklers and water spray systems-kits (fire safety).
EN 12259-4:2000/A1:2001
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety).
EN 13565-1:2003 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety).
EN 54-21:2006
Product Certification Body (System 1+)
2011/284/EU Power, control and communication cables (1/3):- Power, control and communication cables (for uses subject to regulations on reaction to fire)
EN 50575:2014 + A1:2016
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 85 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/579/EC Circulation fixtures (1/2) : - Road marking products: retroreflecting road studs (for circulation area).
EN 1463-1:2009
96/579/EC Circulation fixtures (1/2) : - Road lighting columns (for circulation areas).
EN 40-4:2005 EN 40-4:2005/AC:2006 EN 40-5:2002 EN 40-6:2002 EN 40-7:2002
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas).
EN 12966-1:2005+A1:2009
96/579/EC Circulation fixtures (1/2) :
- Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent traffic signs (for circulation areas).
EN 12899-1:2007
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas).
EN 12352:2006 EN 12899-3:2007
96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas).
EN 12368:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 86 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
96/579/EC Circulation fixtures (1/2) : - Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas).
EN 1423:1997/A1:2003 EN 1423:2012 EN 1463-1:2009
96/579/EC Circulation fixtures (1/2) : - Vehicle restraint barriers: transition barriers (for circulation areas).
EN 1317-5:2007+A1:2008 EN 1317-5:2007+A2:2012
96/579/EC Circulation fixtures (1/2) :
- Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic bollards (for circulation areas).
EN 12899-2:2007
Test Laboratory
(System 3) 96/579/EC Circulation fixtures (2/2) : - Road traffic noise reducing devices and barriers (for circulation areas).
EN 14388:2005 EN 14388:2005/AC:2008
96/580/EC Curtain wallings (1/1) : -
Curtain wall kits (as external walls not subject to reaction to fire requirements), Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Product
Certification Body (System 1)
96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 87 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for drainage and/or filtration (in roads, railways, foundations and walls, drainage systems, erosioncontrol, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as fluid or gas barriers (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15382:2008
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 88 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+) (cont’d)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for reinforcement (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 89 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+) (cont’d)
96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as protective layer (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).
EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13254:2000 EN 13254:2000/A1:2005 EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005
97/176/EC Structural timber products (1/3) : - Solid structural timber products; Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings).
EN 14250:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 90 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+) (cont’d)
97/176/EC Structural timber products (1/3) : - Solid structural timber products: Elements (bridge elements, truss elements, sleepers, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (bridges, railtracks and buildings).
EN 14081-1:2005+A1:2011 EN 14250:2010
Product Certification Body (System 1)
97/176/EC Structural timber products (2/3) : - Structural glued laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) (for bridges and buildings).
EN 14080:2005
97/176/EC Structural timber products (2/3) : - Structural glued laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (for bridges and buildings).
EN 14080:2005 EN 14374:2004
FPC Certification Body (System 2+)
97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications).
EN 13986:2004 +A1:2015
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 91 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1)
97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external application).
EN 13986:2004 +A1:2015
Test Laboratory (System 3)
97/464/EC Waste water engineering products outside buildings (2/3) : - Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads).
EN 1433:2002 EN 1433:2002/A1:2005
Product Certification Body (System 1+)
97/555/EC Cements, building limes and other hydraulic binders : - Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 413-1:2004 EN 413-1:2011
97/555/EC Cements, building limes and other hydraulic binders :- Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14216:2004 EN 197-1:2000 EN 197-1:2000/ A1:2004 EN 197-1:2000/A3:2007 EN 197-1:2011
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 92 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2)
97/555/EC Cements, building limes and other hydraulic binders : - Building limes, including: -Calcium limes -Dolomitic limes, -Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 459-1:201
FPC Certification Body (System 2+)
97/555/EC Cements, building limes and other hydraulic binders : - Rapid hardening hydraulic road binders (preparation of concrete, mortar, grout and other mixes for road bases stabilisation)
EN 13282-1:2013
Product Certification Body (System 1+)
97/555/EC Cements, building limes and other hydraulic binders : - Calcium aluminate cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14647:2005 EN 14647:2005/AC:2006
97/555/EC Cements, building limes
and other hydraulic binders : - Special cements, including: -low heat cements, -sulfate resisting cement, -white cement, -sea water resisting cement, -low alkali cement (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
EN 14216:2004 EN 15743:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 93 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+)
97/740/EC Masonry and related products (1/3) : - Factory-made, designed masonry mortars (in walls, columns and partitions).
EN 998-2:2016
97/740/EC Masonry and related
products (1/3) : - Masonry units category I (in walls, columns and partitions).
EN 771-1:2011 + A1:2015 EN 771-2:2011 EN 771-3:2011 + A1:2015 EN 771-4:2011 + A1:2015 EN 771-5:2011 + A1:2015 EN 771-6:2011
Product Certification Body (System 1)
97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).
EN 14041:2004 EN 14041:2004/AC:2006
97/808/EC Floorings (2/2) : - Floor screed materials (for internal uses).
EN 13454-1:2004 EN 13813:2002
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 94 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+)
98/214/EC Structural metallic products and ancillaries (1/4) : - Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures).
EN 10025-1:2004 EN 10219-1:2006 EN 15088:2005
98/214/EC Structural metallic products and ancillaries (3/4) : - Welding materials (for uses in structural metallic works).
EN 13479:2004
98/214/EC Structural metallic products and ancillaries (4/4) : - Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).
EN 14399-1:2005
Test Laboratory (System 3)
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Roof access systems, walkways and footholds (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).
EN 12951:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 95 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3) (cont’d)
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Rooflights (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).
EN 1873:2005
98/437/EC Internal and external wall
and ceiling finishes (1/5) : - Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).
EN 13964:2004 EN 13964:2004/A1:2006
Product Certification Body (System 1)
98/437/EC Internal and external wall and ceiling finishes (3/5): - Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
EN 13964:2004 EN 13964:2004/A1:2006
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).
EN 14716:2004
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 438-7:2005
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 96 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+)
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates for bituminous mixtures and surface treatments (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Armourstones (for hydraulic structures and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 97 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+) (cont’d)
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
98/598/EC Aggregates for uses with high safety requirements (2/2) : - Railway ballast (for railway works).
EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 98 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
FPC Certification Body (System 2+) (cont’d)
98/601/EC Road construction products (1/2) : - Bituminous mixtures (for road construction and surface treatment of roads).
EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN 13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008
98/601/EC Road construction products (1/2) : - Bitumen (for road construction and surface treatment of roads).
EN 12591:2009 EN 13808:2005 EN 13924:2006 EN 13924:2006/AC:2006 EN 14023:2010
98/601/EC Road construction products (1/2) : - Surface treatments (for surface treatments of roads).
EN 12271:2006 EN 12273:2008
98/601/EC Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).
EN 14695:2010
99/90/EC Membranes (1/3) : - Roof sheets (in buildings).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (1/3) : - Damp proofing sheets (in buildings).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 99 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3)
99/90/EC Membranes (1/3) : - Water vapour control layers (in buildings).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (1/3) : - Roof underlays (in buildings).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (1/3) : - Damp proof courses (in buildings).
EN 14909:2006 EN 14967:2006
Product Certification Body (System 1)
99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2006 EN 14967:2006
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 100 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3)
99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008
99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2006 EN 14967:2006
99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 101 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1)
99/91/EC Thermal insulating products (2/2) : - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2012 + A1:2015 EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009 + A1:2013 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004 EN 14317-1:2004
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 102 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Calculation body Test Laboratory (System 3)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes).
EN 13241-1:2003 EN 13241-1:2003+A1:2011 EN 14351-1:2006+A1:2010
Product Certification Body (System 1)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes).
EN 14351-1:2006 + A1:2010 EN 14351-1:2006 + A2:2016 EN 16034:2014
Calculation body Test Laboratory (System 3)
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other).
EN 14351-1:2006+A1:2010
Product Certification Body (System 1)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Fibres (for structural uses in concrete, mortar and grout).
EN 14889-1:2006 EN 14889-2:2006
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 103 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1+)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (Type II) (for concrete, mortar and grout)
EN 450-1:2012
FPC Certification Body (System 2+)
99/469/EC Products related to concrete, mortar and grout (1/2) : - Concrete protection and repair products (for other uses in buildings and civil engineering works).
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004 EN 1504-5:2004 EN 1504-6:2006 EN 1504-7:2006
99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (type I) (for concrete, mortar and grout).
EN 12878:2005 EN 12878:2005/AC:2006
99/469/EC Products related to
concrete, mortar and grout (1/2) : - Admixtures (for concrete, mortar and grout)
EN 934-2:2009 + A1:2012 EN 934-3:2009 + A1:2012
Test Laboratory
(System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 1057:2006+A1:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 104 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3) (cont’d)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Fittings, adhesives, joints, joint sealings and gaskets (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 682:2002 EN 682:2002/A1:2005
Product Certification Body (System 1)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building), Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).
EN 1057:2006+A1:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 105 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).
EN 1057:2006+A1:2010
Product Certification Body (System 1)
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1279-5:2005+A2:2010
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).
EN 1279-5:2005+A2:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 106 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) (cont’d)
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Test Laboratory (System 3)
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for other uses liable to present "safety-in-use" risks and subject to such regulations).
EN 1279-5:2005+A2:2010
2000/245/EC Flat glass, profiled
glass and glass-block products (4/6) : - Flat or curved glass panels (for other uses liable to present "safety-in-use" risks and subject to such regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Insulating glass units (for uses relating to energy conservation and/or noise reduction).
EN 1279-5:2005+A2:2010
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 107 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Test Laboratory (System 3) (cont’d)
2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Flat or curved glass panels (specially treated) (for uses 2 relating to energy conservation and/or noise reduction).
EN 14179-2:2005
Product Certification Body (system 1) Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :- Valves and taps (in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 331:1998 EN 331:1998/A1:2010
FPC Certification Body (System 2+)
95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).
EN 416-1:2009 EN 621:2009 EN 777-1:2009 EN 777-2:2009 EN 777-3:2009 EN 777-4:2009 EN 778:2009 EN 1020:2009 EN 1319:2009
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 108 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Product Certification Body (System 1) Test Laboratory (System 3)
99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).
EN 14800:2007 EN 15069:2008
FPC Certification
Body (System 2+)
99/94/EC Precast normal/lightweight/autoclaved aerated concrete products (1/1) : - Precast normal/lightweight/autoclaved aerated concrete products (for structural use).
EN 1168:2005 + A3:2011 EN 12737:2004+A1:2007 EN 12794:2005 + A1:2007 EN 13224:2004+A1:2007 EN 13225:2013 EN 14843:2007 EN 14844:2006+A2:2011 EN 14991:2007 EN 14992:2007 EN 15037-1:2008 EN 15037-2:2009 + A1:2011 EN 15037-4:2010 EN 15050:2007 EN 15258:2008 EN 15435:2008 EN 15498:2008
Annex V
FPC Certification Body System 2+)
98/214/EC Structural metallic products and ancillaries (2/4)
EN 1090-1:2009 EN 1090-1:2009/AC:2010 EN 1090-1:2009+A1:2011
Mutual Recognition Agreements between the UK and Australia/New Zealand
Conformity Assessment Body
Low Voltage Products Designation as a CAB in accordance with Chapter 1 of the MRA
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 109 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425) and the Personal Protective Equipment (Enforcement) Regulations 2018
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
PPE Product Types: Equipment Providing Buoyancy aid Equipment Providing Chest and Groin protection Equipment for eye protection Equipment Providing Face protection Equipment for leg and/or foot and anti-slip protection Equipment Providing General Body protection (Clothing) Equipment Providing Hand and Arm protection Equipment for Head protection Equipment for Hearing protection Equipment Providing Respiratory System protection Providing Protection Against: Equipment Providing Protection against Cold [> -50 °C] Equipment Providing Protection against Cold [cold > -50 °C] [extreme cold < -50 °C] Equipment Providing Protection against Cold [extreme cold < -50 °C] Equipment Providing Protection against Heat [< 100 °C] Equipment Providing Protection against Heat [> 100 °C and Fire and Flame]
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 110 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425) and the Personal Protective Equipment (Enforcement) Regulations 2018 (cont’d)
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D
Conformity to type based on
quality assurance of the production
process
Equipment Providing Protection against Heat [< 100 °C] [> 100 °C and Fire] Protective equipment against Bullet wounds or knife stabs Protective Equipment against Drowning Protective Equipment against Electric Shock Protective Equipment against Electrical and Magnetic Fields and Waves Protective Equipment against Falls from Heights Protective Equipment against Hand-held Chain-saws Protective Equipment against Harmful Biological Agents Protective Equipment against Harmful Noise Protective Equipment against Ionising Radiation Protective Equipment against Mechanical Risks Protective Equipment against Non-ionising Radiation Protective Equipment against Slipping Protective Equipment against Static Compression
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 111 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment Regulations (Regulation (EU) 2016/425) and the Personal Protective Equipment (Enforcement) Regulations 2018 (cont’d)
Module B Type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
Protective Equipment against Substances and Mixtures which are Hazardous to Health Protective Equipment against Vibrations Protective Equipment against risks arising from a sports activity Specialised Area of Competence: Protective clothing against static electricity Specialised Area of Competence: Protective clothing for use in welding and allied processes Specialised Area of Competence: Firefighters suits Specialised Area of Competence: High Visibility Clothing Specialised Area of Competence: Protective Clothing for Motorcycle Riders Specialised Area of Competence: Protective Equipment for Diving Specialised Area of Competence: Protective Equipment for use in Potentially Explosive Atmospheres
Essential Health and Safety requirements Annex II of the Regulation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 112 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Pressure Equipment (Directive 2014/68/EU) implemented in Northern Ireland by the Pressure Equipment (Safety) Regulation 2016
Directive: Article 14: Annex III
Regulation 42.
Conformity Assessment
Modules
A2, B, C2, D, D1, E, E1, F, G, H,
H1
All descriptions of pressure equipment and assemblies covered by the Regulations in relation to the conformity assessment modules
Inspection Body Procedures PP250
Directive: Annex
I – 3.1.2 Regulations: Schedule 2
paragraph 21.
Categories II III and IV Approval of permanent joining procedures and personnel **
Inspection Body Procedures PP250
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 113 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Directive 2009/23/EC Measuring Instruments implemented in Northern Ireland by the Measuring Instruments Regulations 2016
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex IX (MI-007) of the directive
Taximeters Annex IX (MI-007)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 114 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Directive 2009/23/EC Measuring Instruments implemented in Northern Ireland by the Measuring Instruments Regulations 2016 (cont’d)
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex III (MI-001) of the directive
Water meters Annex III (MI-001)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 115 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Directive 2009/23/EC Measuring Instruments implemented in Northern Ireland by the Measuring Instruments Regulations 2016 (cont’d)
Declaration of Conformity
Based on Full Quality
Assurance plus Design
Examination Annex H1
All instruments as defined in Annex IV (MI-002) of the directive
Gas meters and volume conversion devices Annex IV (MI-002)
EC Type
Examination Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 116 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Directive 2009/23/EC Measuring Instruments implemented in Northern Ireland by the Measuring Instruments Regulations 2016 (cont’d)
EC Type Examination
Annex B
Declaration of Conformity to
Type Based on the Quality
Assurance of the Production
Process Annex D
All instruments as defined in Annex V (MI-003) of the directive
Active Electrical Energy Meters Annex V (MI-003)
Declaration of
Conformity to Type Based on
Product Verification
Annex F
Declaration of
Conformity Based on Full
Quality Assurance plus
Design Examination
Annex H1
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 117 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Gas Appliances (Regulation (EU) 2016/426) implemented in Northern Ireland by the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018 (cont’d)
Annex III.1 Module B: EU Type-
Examination
Annex III.2 Module C2: Conformity to
Type Based on internal production
control
Annex III.3 Module D: Conformity to Type
Based on QA of the production process
Annex III.4 Module E:
Conformity to type based on Product QA
Annex III.5
Conformity to type based on Product
Verification
Annex III.6 Conformity based on unit
Verification
Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting, and washing; forced draught burners, and heating bodies to be equipped with such burners Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 118 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Marine Equipment (Directive 2014/90/EU) implemented in Northern Ireland by the Merchant Shipping (Marine Equipment) Regulations 2016
Chapter 4, Article 15 & Annex II* Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification Module G: EC Unit Verification
Life Saving Appliances MED 1 / 1.2b, 1.2c*
* In accordance with Implementing Acts (Article 35(2)) & Commission Regulation 2018/773/EU - (Article 35(5)) via Article 40 concept of Directive 2014/90/EU
Fire Protection MED 1 / 3.1, 3.2, 3.7, 3.18b, 3.18c, 3.18e, 3.21, 3.29, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.53, 3.55, 3.56, 3.70, 3.71* Other Safety Equipment MED/7.1
Location: Milton Keynes Note: The inspection of items marked thus * are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 119 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Radio Equipment (Directive 2014/53/EU) implemented in Northern Ireland by the Radio Equipment Regulations 2017
EU-type examination (Annex III) Conformity Based on Full Quality Assurance (Annex IV)
Fixed Link Fixed Wireless Access Industrial, Scientific and Medical within the scope of the directive Mobile (Cellular) Telephone Handsets Paging (Radio Messaging) Private/Professional Mobile Radio Radio equipment operating below 9KHz Radio Frequency Identification (RFID) Radio Local Area Network Radio receivers (including broadcast radio and TV receivers) Short Range Devices TTE for fixed (wired) network (all types) Ultra-Wideband Applications Wireless Microphones Wireless Telephones
0003
Accredited to
ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Tree s, Che r t sey Lane , S ta i nes -upon -Thames , TW18 3HR, UK
BSI Assurance UK Limited
Issue No: 217 Issue date: 09 July 2021
Assessment Manager: WC1 Page 120 of 120
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Methods / Procedures Essential requirements: Product specification / Properties/Standards
Boiler Efficiency (Directive 92/42/EEC) implemented in Northern Ireland by the Boiler (Efficiency) Regulations 1993
Module B (Annex III): EC type-examination Module C (Annex IV): Conformity to type Module D (Annex IV): Production quality assurance Module E (Annex IV): Product quality assurance
Hot-water boilers fired with liquid or gaseous fuels with a rated output of no less than 4 kW and no more than 400 kW
Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.
Locations where Notified Body activities covered by the above Accreditation Standard are undertaken
BSI Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP UNITED KINGDOM
BSI Holywell Park Ashby Road Loughborough Leicestershire LE11 3AQ UNITED KINGDOM
BSI Kitemark House Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ UNITED KINGDOM
END