Schedule of Accreditation United Kingdom Accreditation Service · PDF file4705 Accredited to...

Assessment Manager: GC of 20

Schedule of Accreditation issued by

United Kingdom Accreditation Service

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

4705

Accredited to ISO/IEC 17065:2012 to provide product

conformity certification

UL International (UK) Ltd

Issue No: 025 Issue date: 01 March 2018

Wonersh House

The Guildway

Old Portsmouth Road

Guildford

Surrey

GU3 1LR

Contact: Mr Iman Bageri

Tel: +44 (0)1483 302130

Fax: +44 (0)1483 302230

E-Mail: [email protected]

Website: www.ul-europe.com

Locations where certification activities covered by the above Accreditation Standard are undertaken UL International (UK) Ltd. 220 Cygnet Court Centre Park Warrington WA1 1PP

4705

Accredited to ISO/IEC

17065:2012 to provide product conformity certification


United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK




DETAIL OF ACCREDITATION

Product

Standard

Specific requirements for the assessment of fire protection to structural steel elements

BS ISO 834-11:2014

UL EU Voluntary Mark for Construction Products Flat glass, profiled glass and glass-block products (1/6)

: -

Flat or curved glass panels (for use in a glazed

assembly intended specifically to provide fire

resistance).

EN 12150-2:2004

EN 14179-2:2005

EN 14449:2005

EN 14449:2005/AC:2005

CCN: ENCB, ENCC, ENCD, ENCE

Flat glass, profiled glass and glass-block products (4/6)

: -

Flat or curved glass panels (for use as anti-bullet, or

anti-explosion glazing).

EN 12150-2:2004

EN 14179-2:2005

EN 14449:2005

EN 14449:2005/AC:2005

CCN: ENCB, ENCC, ENCD, ENCE

Fire stopping, fire sealing and fire protection products ETAG 026 - 1

ETAG 026 - 2 Version 08/2011

ETAG 026 - 3 Version 08/2011

CCN: ENCG

Fire Protective Products ETAG 018-1

ETAG 018-2 (2011) ETAG 018-3 (2013) ETAG

018-4 (2012)

CCN: ENCF

Fire Resistance Classification BS EN 13501-2:2007+A1:2009

BS EN 13501-3:2005+A1:2009

BS EN 13501-4: 2016

CCN: ENDB, ENDC

CO Alarms RV’s EN50291-1:2010

CO Alarms Domestic EN 50291-1:2010+A1:2012

4705








Product

Standard

Fire alarm/detection, fixed fire-fighting, fire and smoke

control and explosion suppression products (1/1)

Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)

*EN 54-2:1997

EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 CCN: ENGA

EN 54-3:2001 EN 54-3:2001/A1: 2002

EN 54-3:2001/A2: 2006 EN 54-3:2014 CCN: ENGB EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 CCN: ENGC EN 54-5:2000 EN 54-5:2000/A1:2002 CCN: ENGD EN 54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 CCN: ENGE EN 54-10:2002 EN 54-10:2002/A1:2005 CCN: ENGF EN 54-11:2001 EN 54-11:2001/A1:2005 CCN: ENGG

EN 54-12:2015

CCN: ENGH

4705








Product

Standard


EN54-13: 2005 EN54-13: 2017 CCN: ENGI

EN 54-16:2008

CCN: ENGJ EN 54-17:2005 EN 54-17:2005/AC:2007 CCN: ENGK EN 54-18:2005 EN 54-18:2005/AC:2007 CCN: ENGL EN 54-20:2006 EN 54-20:2006/AC:2008 CCN: ENGM EN 54-21:2006 CCN: ENGN EN 54-22:2015 CCN: ENGO EN54-23:2010 CCN: ENGP EN 54-24:2008

CCN: ENGQ

EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012

CCN: ENGR

4705








Product

Standard


EN54-26:2015 CCN: ENGS EN54-27:2015 CCN: ENGT

EN54-28:2016 CCN: ENGU EN54-29:2015 CCN: ENGV EN54-30:2015 CCN: ENGW EN54-31:2014 EN54-31:2014+A1 CCN: ENGX

Building Hardware related to doors, gates and windows EN 1125:2008

EN 1154:1996/A1: 2002 EN 1154:1996/A1: 2002/AC: 2006 EN 1155:1996/A1: 2002/AC: 2006 EN 1155:1997/A1: 2002 EN 1158:1997/A1: 2002 EN 1158:1997/A1: 2002/AC: 2006 EN 12209:2003 EN 12209:2003/AC: 2005 EN 12209:2016 EN 179:2008 EN 1935:2002 EN 1935:2002/AC: 2003 EN 14351-1: 2006+ A2: 2016

END

4705








Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, ISO17021 and ISO17025

Directive / Regulation

Conformity Assessment procedure/

Module/article

Category of products or individual products

Essential requirements: Product specification / Properties/Standards

The Construction Products Regulation (EU) No 305/2011

Annex V- Product Certification Body (AVCP) System 1

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)

EN 12094-1:2003 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-16:2008



EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2014

Annex V- Product

Certification Body (AVCP) System 1


EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999

Annex V- Product

Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities


EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-10:2002 EN 54-10:2002/A1:2005 * EN 54-12:2015

4705










Module/article



The Construction Products Regulation (EU) No 305/2011 (cont’d)



EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006

Annex V- Product



EN 54-11:2001 EN 54-11:2001/A1:2005

Annex V- Product



EN 54-17:2005 EN 54-17:2005/AC:2007

Annex V- Product



EN 54-18:2005 EN 54-18:2005/AC:2007

4705










Module/article






EN 54-20:2006 EN 54-20:2006/AC:2008

Annex V- Product



EN 54-21:2006

Annex V- Product


*Under Article 46 of

the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities


* EN 54-22:2015

Annex V- Product



EN54-23:2010

4705










Module/article






EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012

Annex V- Product



* EN54-26:2015

Annex V- Product



* EN54-27:2015

4705










Module/article






EN54-28:2016

Annex V- Product



* EN54-29:2015

Annex V- Product Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities


* EN54-30:2015

4705










Module/article






* EN54-31:2014

Annex V- Product


96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).

* EN 15650:2010 * EN 12101-8:2011

4705










Module/article





99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).

EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 * EN 16034:2014 * EN 1303:2015 * EN 14351-1:2006 (Excluding those with fire or smoke resistence) * PREN 14351-2:2009 (Excluding those with fire or smoke resistence) * EN 14846:2008

Annex V- Product


2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance).

EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

4705










Module/article





2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing).

EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

Annex V- Product


2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).

EN 1279-5:2005+A2:2010

Annex V- Product


2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).

EN 1279-5:2005+A2:2010

Annex V- Product


98/213/EC Internal partition kits (1/5)

ETAG 003

4705










Module/article





99/454/EC Fire stopping, fire sealing and fire protection products (1/2)

ETAG 026 - 1 ETAG 026 - 2 Version 08/2011 ETAG 026 - 3 Version 08/2011 ETAG 018 – 1 Version 27-06-2013 ETAG 018 – 2 Version 06-12-2011 ETAG 018 – 3 Version 27-06-2013 ETAG 018 – 4 Version 11-01-2012

Annex V- Product


99/454/EC Fire stopping, fire sealing and fire protective products (2/2)

ETAG 026 - 1 ETAG 026 - 2 Version 08/2011 ETAG 026 - 3 Version 08/2011

Annex V- Product



EN 12259- 1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005

Annex V- Product


97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).

EN 14041:2004 EN 14041:2004/AC:2006

4705










Module/article





97/808/EC Floorings (2/2) : - Rigid flooring products<BR>(a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (for internal uses including enclosed public transport premises).

EN 14342:2005+A1:2008

Annex V- Product


Fixed fire fighting systems: Pillar fire hydrants

EN14384:2005

Annex V- Product


Smoke and Heat Control Systems. Part 7: Smoke Duct Sections

EN 12101-7:2011

Annex V- Product


Fire Classification of Construction Products and Building Elements. Part 4: Classification using data from fire resistance tests on Components of Smoke Control Systems.

EN 13501-4:2016

4705









Conformity Assessment procedure/ Module/article


Essential requirements: Product specification /

Properties/Standards


As a Technical Assessment Body (TAB) for developing European Assessment Documents

Annex IV –Product Areas

2 Doors, windows, shutters, gates and related building hardware 10 Fixed fire fighting equipment (fire alarm/detection, fixed fire fighting, fire and smoke control and explosion suppression product)

21 Internal and external wall and

ceiling finishes. Internal partition kits

30 Flat glass, profiled glass and

glass block products 35 Fire stopping, fire sealing, fire

protective products and fire retardant products

4705










Module/article



Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) (EU) 2016/425 Personnel Protective Equipment Regulation

Articles: 10 EC type-examination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process

• Equipment providing face protection

Basic Health and Safety requirements Annex II of the Directive and Schedule II of the

Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.

• Equipment providing eye protection

• Equipment providing foot and Leg protection

• Equipment providing general body protection (clothing)

• Equipment providing hand and arm protection

• Equipment providing head protection

• Protective equipment against chemical agents

• Protective

equipment against drowning and buoyancy aids

• Protective equipment against falls from height

4705










Module/article



Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) (EU) 2016/425 Personnel Protective Equipment Regulation

Articles: 10 EC type-examination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production proces

• Protective equipment against cold [cold > -50°C]

Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.

• Protective equipment against cold [extreme cold < -50°C]

• Protective equipment against heat [heat > 100°C and fire flame]

• Protective equipment against heat [heat < 100°C]

• Protective equipment against mechanical risks

• Protective clothing against static electricity

• Protective clothing for use in potentially explosive atmospheres

• Protective

equipment against knife cuts

4705










Module/article



(EU) 2016/425 Personnel Protective Equipment Regulation (cont’d)

• Protective clothing for firemen

Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.

• Protective equipment for firemen

• Protection against handheld chainsaws

• Protection

against Non Ionising Optical Radiation

• Protection against Electrical Risks

• Protection against Welding and Allied Processes

Machinery Directive (2006/42/EC) Implemented in UK Law by: Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597)

Annex IX: EC type-examination Annex X: Full quality assurance

19. Protective devices designed to detect the presence of persons. 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11. 21. Logic units to ensure safety functions.

4705









Conformity Assessment procedure/ Module/article


Essential requirements: Product specification /

Properties/Standards

Marine Equipment Directive 2014/90/EU (as amended) Implemented in UK Law by: The Merchant Shipping (Marine Equipment) Regulations 2016*

Chapter 4, Article 15 & Annex II Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification

Life Saving Appliances MED 1.1 MED 1.4 to MED 1.7

** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU Process 27-MD-P0852

Fire Protection MED 3.3 MED 3.5

Note: The inspection of items marked thus * are subject to legislative requirements including the

appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation

END

Schedule of Accreditation United Kingdom Accreditation Service · PDF file4705 Accredited to...

Documents

Transcript of Schedule of Accreditation United Kingdom Accreditation Service · PDF file4705 Accredited to...