Schedule of Accreditation United Kingdom Accreditation Service … · 2710 Accredited to ISO/IEC...
Transcript of Schedule of Accreditation United Kingdom Accreditation Service … · 2710 Accredited to ISO/IEC...
Assessment Manager: PL Page 1 of 12
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2710
Accredited to
ISO/IEC 17025:2005
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
2nd Floor
Building No 4
Shanghai Comalong Industrial Park
889 Yi Shan Road
Shanghai 200233
China
Contact: Ms Cynthia Liu
Tel: +86 21 6091 7064
Fax: +8621 6119 5015
E-Mail: [email protected]
Website: www.intertek.com/www.intertek..com.cn
Testing performed by the Organisation at the locations specified below
Locations covered by the organisation and their relevant activities
Laboratory locations:
Location details Activity Location code
Address 4th, 5th & 9th Floors Building No 2 Shanghai Comalong Industrial Park 889 Yi Shan Road Shanghai 200233 China
Local contact Ms C Liu Tel: +8621 60917064 Fax: +8621 6119 5015
Testing: Furniture - Furnishing - Flammability
A
Address Block B Jinling Business Square No 801 Yi Shan Road Shanghai 200233 China
Local contact Ms C Liu Tel: +8621 6120 6565 Fax: +8621 6119 5015
Testing: Toys - Physical/Mechanical Toys - Flammability Toys - Chemical Toys - Electrical Safety Writing & Marking Instruments Leather - Chemical Textiles - Chemical Plastics - Chemical Wood-based Panels - Chemical Ceramics/Glass/Enamel - Chemical Furniture - Strength & Stability
B
Address Building 86, No.1198,
Qinzhou North Road,
Shanghai 200233
China
Local contact Ms C Liu Tel: +8621 60917064 Fax: +8621 6119 5015
Testing: Toys- Electrical Safety
C
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 2 of 12
DETAIL OF ACCREDITATION
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING
Physical and Mechanical BS EN 71-1: 2014 Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys
B
EN 71-1:2014
Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys 8.28.2.4 Toys with earphones and headphones 8.28.2.11 Voice toys
NF EN 71-1: 2014
Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys 8.28.2.4 Toys with earphones and headphones 8.28.2.11 Voice toys
DIN EN 71-1:2014
Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys 8.28.2.4 Toys with earphones and headphones 8.28.2.11 Voice toys
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 3 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING (cont’d)
Physical and Mechanical
Flammability BS EN 71-2:2011 +A1:2014
EN 71-2:2011+A1:2014 DIN EN 71-2:2011+A1:2014 NF EN 71-2:2011+A1:2014
B
Migration of ceratin elements Category I, Category II, & Category III
SOP SHC-TP226 To implement, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 table 2, Using acid extraction, and ICP(OES) and ICP (MS) To implement EU Directive 2009/48/EC (and Amd 2012/7EU)
B
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 4 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING (cont’d)
Category III Extractable Chromium (CrIII, CrVI) B
SOP SHC-TP226 To implement, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:201 table 2, Using acid extraction, and ICP (MS) By Subtraction: Cr III = Total Cr – Cr VI To implement EU Directive 2009/48/EC (and Amd 2012/7EU)
First action screening test For Cat I,Cat II & Cat III materials
If total extractable Cr, when Uexp is taken into account; is < 0.02mg/Kg for Cat I; is < 0.005mg/Kg for Cat II is < 0.2mg/Kg for Cat III; then it may be inferred that the sample meets the requirements of, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 table 2 for The appropriate Category for both Cr III & Cr VI
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 5 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING (cont’d)
Category III
Extractable Organic Tin
SOP SHC-TP043 To meet limits of table 2 of BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 Total, or presence of other Organic Tin compounds may mean limits of table 2 are exceeded If Organo Tin (expressed as TributylTIn, calculated from total extractable Sn, when Uexp is taken into account; Is < 0.9mg/Kg for Cat I; Is < 0.2mg/Kg for Cat II; Is < 12mg/Kg for Cat III; then it may be inferred that the sample meets the migration limits of BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 for the appropriate Category for both
Inorganic and Organic Tin
Graphical symbol for age warning labelling
BS EN 71-6:1995 EN 71-6:1994 DIN EN 71-6:1994
B
Swings, Slides and similar activity
toys for indoor and outdoor family domestic use
EN 71-8:2011 BS EN 71-8:2011
B
Toys Labelling Mexican Official Standard NOM-
015-SCFI-2007 B
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 6 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING (cont’d)
PVC & PVC from TOYS (cont’d)
Children’s Products & Toys Total lead in surface coatings
SHC-TP228 & ASTM F2923-14, to implement CPSC-CH-E1003-09.1:2011, and meet the requirements of 16CFR1303, and CPSIA:2008 section 101, using microwave digestion and ICP(OES)
Total Lead in Plastic materials
ASTM F2617-2015 to meet requirements of CPSIA:2008 using XRF SHC-TP209 to meet requirements of CPSIA 2008 via CPSC-CH-E1002-08.3:2012 uisng hot block or microwave digestion and ICP(OES)
B
Total lead in metal items including
children’s jewellery SHC-TP220 to meet requirements of CPSIA2008 via CPSC-CH-E1001-08.3:2012, using hot black, or microwave digestion and ICP(OES)
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 7 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND TOY PACKAGING (cont’d)
ELECTRIC TOYS Safety EN 62115:2005 +A12:2015
excluding Clause 16.1 &Annex’s C and E
B & C
WRITING & MARKING INSTRUMENTS
Safety BS 7272-1:2008 BS 7272-2:2008 +A1:2014
B
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 8 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
LEATHER Forbidden amine (Azodye) ISO 17234-1:2015 on unmiled
samples using HPLC(DAD) and GC(MS)
B
4-Aminoazobenzene 64 LFGB BVL B 82.02-9 &
§64 LFGB BVL B 82.02-15
ISO 17234-2:2011 on unmilled samples using HPLC(DAD) and GC(MS)
B
Chromium (VI) – Colorimetric
method BS EN ISO 17075-1:2017 IULTCS/IUC 18-1 2017- DIN EN ISO 17075-1:2017-05 onunmilled samplesBy UV-VIS spectrophotometry
B
TEXTILES & GARMENTS Forbidden amine (Azodye) in textile
products with and without extracting the fibres
BS EN 14362-1:2012 (withdrawn) EN 14632-1:2012 (withdrawn) DIN EN 14632-1: 2012 (withdrawn)using HPLC(DAD) and GC(MS) BS EN ISO 14362-1:2017 EN ISO 14632-1: 2017 DIN EN ISO14632-1: 2017-05 using HPLC(DAD) and GC(MS)
B
Mono, di & tri substituted organo tin
compounds SHC-TP044 by extraction and GC(MS)
B
Formaldehyde - free and hydrolized BS EN ISO 14184-1:2011
EN ISO 14184-1:2011 DIN EN ISO 14184-1:2011
A, B
Formaldehyde - released BS EN ISO 14184-2: 2011
EN ISO 14184-2:2011 DIN EN ISO 14184-2:2011
A, B
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 9 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TEXTILES & GARMENTS Quantitative fibre analysis BS 4407:1988, (withdrawn)
except parts 25, 26, 29, 32, 33, 34 EU Directives 73/44/EEC (Annexes I, II & III and 96/73/EC (Annexes I and II) as amended by 2006/2/EC (Annex) (withdrawn)
A
To meet requirements of EU
Directive 1007/2011EU, except Method 16
Determination of metals in textiles SHC-TP462 to implement BS
6810-1:1987, clauses 4.4.3 & 8.5 (Excluding Clause 8.5.4.3) Using UV-VIS Spectrophotometry
B
Determination of Arsenic,
Antimony, Cadmium, Cobalt, Chromium, Copper, Lead, Mercury, & Nickel
IHM SHC-TP230 (Sweat & Saliva Extraction) using ICP-MS
B
- Vertically oriented Textile Fabrics and Fabric Assemblies
Flammability BS 5438:1976(2008) A
- Fabrics and Fabric Assemblies used in Sleepwear and Dressing Gowns
Flammability BS 5722:1984 A
- Pile Fabrics and fabrics having pile on the surface
Ignitability (surface flash) BS 4569:1983(2002) A
- Burning Behaviour of Children’s Nightwear
Flammability BS EN 14878:2007 A
- Burning behaviour of fabrics for apparel
Flammability BS EN 1103:2005 A
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 10 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
FURNITURE & FURNISHINGS
Flammability BS 5852:Part 1:1979 * BS 5852:Part 2:1982 *
A
* for the purposes of the
Furniture and Furnishings (Fire)(Safety) Regulations 1988
A
LEATHER and TEXTILES Octylphenol ethoxylates and
Nonylphenol ethoxylates IHM SHC-TP007 Using HPLC-MS
B
pH ISO 4045:2008 on unmilled
samples BS EN ISO 3071-2006
B
LEATHER, TEXTILES & SILICA GEL
Dimethylfumarate IHM SHC-TP014 using GC-MS B
PLASTICS N, N-Dimethylformamide
IHM SHC-TP401 using Headspace GC(MS)
B
Cadmium content BS EN 1122:2001 (Method B)
EN 1122:2001(Method B) DIN EN 1122:2002 (Method B)
B
Swiss Materials Regulations
(STOV) 22:1991
German Chemicals Prohibition
Ordanance Paragraph 18
EU Directive 494/2011 to
amend REACH Regulations (EC) No 1907:2006 - ANNEX XV Using ICP-OES
Phthalate content EN 14372:2004 (Cl 6.3.2) by GC-MS
B
Bisphenol A
EN 14372:2004 Cl. 6.3.6 using HPLC (FLD)
B
IHM SHC-TP050 using HPLC-DAD/FLD or HPLC-MS
B
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 11 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
WOOD-BASED PANELS Formaldehyde EN ISO 12460-5:2015
DIN EN ISO 12460-5:2016 EN 717-3:1996 in support of EN 71-9, para 4.3.3 Using UV/VIS Spectrophotometry
B
TOYS & TOYS PACKAGING PAPER & BOARD
Formaldehyde EN 1541:2001 Using UV/VIS Spectrophotometry following EN 645 extraction (excluding para 7) to support EN 71-9 para 4.3
B
CERAMIC, GLASS, GLASS CERAMIC AND VITREOUS ENAMEL ARTICLES
Released Lead and Cadmium BS 6748:1986 +AMD1:2011 using AAS
B
CHROMATE CONVERSION COATINGS
Chromate conversion coatings on Zinc, Cadmium, Aluminium-Zinc alloys, and Zinc-Aluminium alloys - Test methods
ISO 3613:2010, para 5.6 B
ELECTROTECHNICAL PRODUCTS
Cr VI IHM SHC-TP231-CCL to meet the requirements of IEC 62321-7-1: 2015
B
Pb,Cd,Hg & Cr IHM SHC-TP232-CCL to meet
the requirements of IEC 62321-3-1:2013 using XRF Screening IHM SHC-TP231-CCL to meet the requirement of IEC 62321-4:2013 & IEC 62321-5:2013 by using ICP-OES
B
PBB & PBDE IHM SHC-TP046-CCL to meet
the requirements of IEC 62321:-6:2015 Using GC-MS and HPLC-DAD
B
PLASTIC MATERIALS IN CONTACT WITH FOOD
Overall Migration EN 1186-1:2002 EN 1186-3:2002 EN 1186-9:2002
2710
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
Intertek Testing Services Ltd, Shanghai
Issue No: 026 Issue date: 02 February 2018
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 12 of 12
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
PLASTIC MATERIALS IN CONTACT WITH FOOD (cont’d)
Overall Migration (cont’d) Testing in support of European Directives 2007/19/EC & 2002/72/EC and EU 10/2011 (citing 82/711/EC & 85/572/EEC) and its amendments By article filling or total immersion
B
PRODUCTS INTENDED TO COME INTO CONTACT WITH SKIN
Release of nickel from products (intended to come into contact with skin)
EN 12472:2005 + A1:2009 EN 1811:2011 +A1:2015
B
Spectacle frames EN 16128:2011
B
Using ICP OES or AAS Physical/Mechanical and Safety
tests
OUTDOOR FURNITURE - Seating and Tables for camping, domestic and contract use
General Safety requirements BS EN 581-1:2017 EN 581-1:2017 DIN EN 581-1:2017
B
Mechanical Safety requirements BS EN 581-3:2017 EN 581-3:2017 DIN EN 581-3:2017
B
FURNITURE Mechanical Safety, Strength and
Durability EN 581-2:2015 EN 1728:2012 EN 1022:2005 BS EN 1730:2012 BS EN 12520:2015 BS EN 12521:2015
B
OFFICE CHAIRS Mechanical Safety, Strength and
Durability ANSI BIFMA X 5.1:2017 B
SKATEBOARDS Safety Multi-roller tester EN 13613:2009
B
END