Sample Line Flow Controller - Home | Aerodyne
2
AERODYNE RESEARCH, Inc. 45 MANNING ROAD, BILLERICA, MA 01821 (978) 663 9500 www.aerodyne.com CACC_OPT_2_1 Sample Line Flow Controller A light weight and low power pump with active flow control for pulling gas or aerosol sample to instrumentation. • Gas and aerosol instruments that require additional sample delivery pumping at controlled rates less than 10 SLPM. • A general purpose pump with user settable flow rates. • Designed for stand alone operation or for integrated use with the ARI Dryer system. • Lightweight and low power 24VDC operation. • Combines a mass flow meter and a vacuum pump with control electronics to actively maintain a user adjustable set point. • Flow rate in the range of 0.5 to 8 LPM can be controlled. APPLICATIONS ADVANTAGES
Transcript of Sample Line Flow Controller - Home | Aerodyne
AERODYNE RESEARCH, Inc. 45 MANNING ROAD, BILLERICA, MA 01821 (978) 663 9500 www.aerodyne.com CACC_OPT_2_1
Sample Line Flow ControllerA light weight and low power pump with active flow control for pulling gas or aerosol sample to instrumentation.
• Gas and aerosol instruments that require additional sample delivery pumping at controlled rates less than 10 SLPM. • A general purpose pump with user settable flow rates.
• Designed for stand alone operation or for integrated use with the ARI Dryer system.
• Lightweight and low power 24VDC operation.
• Combines a mass flow meter and a vacuum pump with control electronics to actively maintain a user adjustable set point.
• Flow rate in the range of 0.5 to 8 LPM can be controlled.
APPLICATIONS ADVANTAGES
AERODYNE RESEARCH, Inc. 45 MANNING ROAD, BILLERICA, MA 01821 (978) 663 9500 www.aerodyne.com CACC_OPT_2_1
Sample Line Flow Controller
Dimensions: 5” H x 6-1/2” W x 14” D (13 cm x 17 cm x 36 cm)
Weight: 8 pounds (3.6 kg) Power: 40W (24VDC) Flow Control Range: 0.5 - 8 LPM
Gas Connections: ½” Swagelok for flow in, ¼” tube stubs for aerosol dryer connections
Electrical 24V input via AMP connector size17 CPC 206036-2Connections: BNC flow signal output (for recording purposes, 1-5V fs)
Rear panel connections
Combined Flow Controller and Dryer System
SPECIFICATIONS:
