RRUBBER ROAD HUMPUBBER ROAD HUMP - Asia Agencies

24
www.asiaagencies.com

Transcript of RRUBBER ROAD HUMPUBBER ROAD HUMP - Asia Agencies

www.asiaagencies.com

Rubber Road Hump

Safety Mirror

Wheel Stopper

Corner Guard

Wall Protection Bumper

Removable Flexi Bollard

Fixed Flexible Bollard

Stainless Steel Bollard

Stainless Steel BollardPremium

Road Refl ector

Barricade

Queue Stand

Bicycle Parking

Wheel Clamp

Signage

Construction Product

Blinking Light /Refl ectors

Inspection Mirror/Tyre Puncture Device

Wheel Chock / Kerb Connector / Auto Car-Lot Reserve

Anti-Slip Strip /Thermo-Sheeting/Road Painting

1

6

11

162

7

12

173

8

13

184

9

14

5

10

15

20

19

10

RUBBER ROAD HUMPRUBBER ROAD HUMP

Model : C 50

Size : 500 x 430 x 50 (L x W x H) mm (centre piece)

Size : 215 x 430 x 50 (L x W x H) mm (end piece)

Origin : Japan

DESCRIPTIONS • Specially designed for both bitumen/interlocking and concrete

road surfaces. (see installation method)

• With metal rod retainer, it reduces the chance of hump dislodging from

bitumen or interlocking roads. (picture 2)

• High impact loading with longer product life-span compared to other humps.

• Easy installation using anchor bolts.

• No painting required unlike concrete hump.

SPECIFICATIONS

• 4 nos. glass refl ector elements on each centre piece of hump could maximize

the refl ectivity in the night. (picture 1)

• Material using 40% recycle rubber, 40% natural rubber and 20% urethane

compound.

INSTALLATION METHOD on concrete surface• Using anchor bolt 10 mm (diameter) x 40 mm (depth).

• 4 bolting points on a centre piece hump.

INSTALLATION METHOD on bitumen/ interlocking surfaceTo prevent hump from dislodging on bitumen/interlocking surfaces, use the following methods only on NIPON C-50 hump.

• Insert a retainer bar in the centre running through the entire hump. (Picture 2)

• Using at least 250 mm long stud with stainless steel bolting. Secured with “Hilti” epoxy for strong durability. This

method will hold the entire hump together.

F1 Track

National Stadium

Glass Refl ector

Picture 1

Metal Rod Retainer

Picture 2

Site

CABLE PROTECTOR

• Origin : Japan• Easy assemble and dismantle.

• The cable protector allows 3 conduit pipes to run through.

Length : 1000 x 310 x 60 (L x W x H) mm

Hole size : 33 mm

Conduit size : 30 mm (maximum)

Top loading : 500 kgf per wheel

1

SAFETY MIRRORSAFETY MIRROR

2

Comply to LTA requirement

OUTDOOR MIRROR

OR 1000 PG 40ins. dia. Polycarbonate Japan

OR 840 PG 32ins. dia. Polycarbonate Japan

OR 660 PG 26ins. dia. Polycarbonate Japan

OR 800 SS 32ins. dia. Stainless steel Japan

OR 300 SS 12ins. dia. Stainless steel Japan

• Fully weatherproof and heavy duty.

• Suitable for pole & wall mounting.

(bracket & pole excluded)

Comply to HDB requirement

INDOOR MIRROR

IR 660 A 24ins. dia. Polycarbonate Japan

IR 450 A 18ins. dia. Polycarbonate Japan

TW 10 10ins. dia. Glass Japan

TW 8 8ins. dia. Glass Japan

• Suitable for both indoor & outdoor usage.

INDOOR MIRROR

DM 660 26ins. dia. Acrylic Japan

DM 450 18ins. dia. Acrylic Japan

• Ceiling mounting. Cross-junction usage

INDOOR MIRROR

DM 660 HALF 26ins. dia. Acrylic Japan

DM 450 HALF 18ins. dia. Acrylic Japan

• Corner ceiling mounting. T-junction usage

WHEEL STOPPERWHEEL STOPPER

3

Model : WS 5006

Size : 750 x 120 x 150 (L x H x W) mm

Origin : Korea

Material : Recycle plastic resin (35%)

: Recycle composite compound (30%)

: Urethane (35%)

Durability : Long lifespan, maintenance free,

: U.V protected

DESCRIPTIONS

• With 2 refl ectors enhance better visibility at night.

• Conspicious yellow capping.

• High impact loading

• Easy installation using anchor bolts.

• No painting is needed unlike concrete stopper.

BOLT SIZE

M12 diameter x 150 mm length x 2 nos.

Model : WS 5001

Size : 500 x 115 x 165 (L x H x W) mm

Origin : Japan

Material : Recycle rubber (40%)

: Natural rubber (60%)

Durability : Long lifespan, maintenance free,

: U.V protected

DESCRIPTIONS

• 3 yellow rubber strips enhance better visibility

during day and night.

• High impact loading

• Easy installation using anchor bolts.

• No painting is needed unlike concrete stopper.

BOLT SIZE

M12 diameter x 180 mm length x 2 nos.

CORNER GUARDCORNER GUARD

4

MODEL : PG 5010

Size : 1000 x 90 x 15 mm

: (L x B x T)

Origin : Korea

Material : Rubber

(35% recycle composite).

Backing : Supported with metal retainer.

DESCRIPTIONS

• Thicker guard 15 mm compared

to other manufacturer producing

similar product.

• Prominent molded-on yellow

strip allows high visibility. As

yellow is molded, it allows zero

chance of “peeling” off.

• 4 bolting points

• Bolt size M5 x 37 mm

MODEL : PG 5075

Size : 1000 x 75 x 10 mm

: (L x B x T)

Origin : Japan

Material : Rubber

(40% recycle composite)

DESCRIPTIONS

• Solid 10 mm thickness.

• Yellow / black strip is glued

with adhesive on guard for

better visibility

• 6 bolting points

• Bolt size M5 x 37 mm

MODEL : PG 5002

Size : 800 x 100 x 8

: (L x B x T) mm

Origin : Japan

Material : Rubber

(45% recycle

composite).

DESCRIPTIONS

• Yellow strip is 3M

refl ective.

• 6 bolting points

• Bolt size M5 x 37 mm

MODEL: PG 5005

Size : 1000 x 100 x 12

: (L x B x T) mm

Origin : Japan

Material : Rubber

(45% recycle

composite).

DESCRIPTIONS

• Using Swarefl ex

yellow crystal beads

strip to allow super

visibility at a far

distance

• 6 bolting points

• Bolt size

M5 x 37 mm

MODEL: PG 5100 GREY

MODEL: PG 5100 BEIGE

Size : 1200 x 50 x 9

: (L x B x T ) mm

Origin : Japan

Material : ABS plastic 60%

: Urethane 40%

Backing : Supported with

: metal retainer.

DESCRIPTIONS

• Commonly used in

offi ce, lobby, etc.

• 4 bolting points

• Bolt size

M5 x 37 mm

WALL PROTECTION BUMPERWALL PROTECTION BUMPER

5

MODEL: PG 5008

Size : 140 x 25 (H x T) mm

Origin : Korea

Material : Rubber with 35% recycle composite.

DESCRIPTIONS

• Commonly used in hotel, condominium, clubs,

shopping mall, etc

• High tensile and hardness strength that can withstand

impact from cars and lorries.

• Prominent molded-on yellow strip allows high visibility

As yellow is molded, it allows zero chance of “peeling”

off.

• 2 bolting points every 500 mm.

• Bolt size M8 x 80 mm.

MODEL: PG 5030

Size : 200 x 30 x 1000 (H x T x L) mm

Origin : Japan

Material : Rubber with 40% recycle composite.

MODEL: PG 5080

Size : 200 x 100 x 600 (H x T x L) mm

Origin : Japan

Material : Rubber with 40% recycle composite.

DESCRIPTIONS

• Commonly used in commercial sector: factories,

production areas, loading bays, etc.

• Heavy duty with high tensile and hardness strength.

• Yellow / black tiger strip allow good visibility.

• 2 bolting points every 500 mm.

• Bolt size M8 x 80 mm.

DESCRIPTIONS

• Commonly used at loading areas.

• With 100mm thickness, it reduces impact damages

to the wall behind when hit by a heavy truck.

• Heavy duty with highest tensile and hardness

strength compared to other products.

• 2 bolting points required.

• Bolt size M12 x 150 mm.

MODEL: PG 5225

(Plastic wall guard)

Size : 200 x 25 x 1000

(H x T x L) mm

Origin : Japan

Material : ABS Plastic with

aluminium support

backing.

MODEL: PG 5003

Size : 330 x 300 x 100

(H x L x T) mm

Origin : Japan

Material : Solid rubber with 35%

recycle compound

Permanent yellow strip

REMOVABLE FLEXI-BOLLARDREMOVABLE FLEXI-BOLLARD

6

MODEL: FLEX-POST

Size : 1080 x 60 (H x Dia of post) mm

Origin : USA

DESCRIPTIONS

• Using latest DUAL SPRING concept by DURA-HIT,

the post system allows maximum fl exibility on the road.

• Using 3M refl ective , it enhance better visibility in both

day & night.

• In case of emergency, the post can be removed with a

locked-on pin system.

• Simply pull pin up to remove post. (see picture 1 below)

• In the case of any light impact collision, the spring system

absorbs the impact by swaying the post. (see picture 2 below)

TYPES OF MODELS

Flex-post standard series : Use as a guide, post or

temporary reserve area

Flex-post slim series : Low traffi c information sign

Flex-post wide series : Heavy traffi c directional sign

SPRING SYSTEM

360° ROTATABLE

Removable Post System

Standard Series Picture 1 Picture 2Slim Series Wide Series

Flexible System

MODEL: SR POST

Size : 1000 x 80

(H x Dia) mm

Origin : USA

Material : Urethane with

polymer compound

DESCRIPTIONS

• 360° fl exibility

• Un-screw

anti-clockwise

direction to

remove post from

base holder

embedded in fl oor.

MODEL: FG 300

Size : 1000 x 80

(H x Dia) mm

Origin : USA

Material : Urethane

DESCRIPTIONS

• Flexibility

• To remove

post, simply

pull locking

pin away

from the base.

• Then pull up the

post to remove

MODEL: FG 800

Size : 1000 x 80

(H x Dia) mm

Origin : USA

Material : Urethane

DESCRIPTIONS

• Flexibility

• To remove post,

simply turn post

anti-clockwise.

Then pull post to

remove.

FIXED FLEXIBLE BOLLARDFIXED FLEXIBLE BOLLARD

7

FB 3008 YB FB 3008 RW

360° ROTATABLE

MODEL: FB 3008

Size : 1100 x 60 (H x Dia of post) mm

Origin : New Zealand

Comply to LTA requirements

DESCRIPTIONS

• Using SPRING concept, the post system allows maximum fl exibility on

the road.

• Injection molded components with polymer for maximum durability.

• Using 3M refl ective, it enhance better visibility in both day & night.

• In the case of any light impact collision, the spring system absorbs the

impact by swaying the post. (see picture 1 below)

• Adjustable spring for tension return.

• No internal cables resulting in snap.

Flexible System

Picture 1

MODEL: FB 3001

Size : 750 x 80

(H x W) mm

Origin : Japan

Material : Urethane

DESCRIPTIONS

• 360° fl exibility

• 3 bands of

refl ective sheeting

by 3M.

MODEL: FB 3003

Size : 860 x 215

(H x W) mm

Origin : Germany

Material : Polyurethane

DESCRIPTIONS

• 180° fl exibility

• 2 bands of

refl ective sheeting

by 3M.

MODEL: FB 6051

Size : 990 x 235

(H x W) mm

Origin : Germany

Material : Polyurethane

DESCRIPTIONS

• 180° fl exibility

• Refl ective

sheeting by 3M.

STAINLESS STEEL BOLLARDSTAINLESS STEEL BOLLARD

8

REMOVABLE SERIES

MODEL : RB 4003

Post Size : 1000 x 75 (H x Dia) mm

Base Size : 200 x 200 mm

Origin : Japan

DESCRIPTIONS

• Post can be fully removed, leaving base on fl oor. (see picture 1)

• Using padlock or cable tie to secure.

• With 3M refl ective yellow band, it is highly visible in the night.

• Can be chain up to block off restricted areas.

Bolting : M10 x 40 mm x 4 nos

(anchor sleeve for concrete ground)

: M10 x 75 mm x 4 nos

(plastic plug with epoxy for asphalt road)

Picture 1

Bollard on site Secured with padlock Bollard removed, leaving base

COLLAPSIBLE SERIES

MODEL : RB 4005

Post Size : 800 x 60

(H x Dia) mm

Base Size : 200 x 200 mm

Origin : Japan

• In case of

emergency

access, the

bollard can be

put lying down

on the fl oor.

PERMANENT SERIES

MODEL : RB 3101

Post Size : 1000 x 75

(H x Dia) mm

Base Size : 100 mm dia

Origin : Japan

• Only use for

permanent

block-off.

• Can be chain up

to block off

larger areas.

REMOVABLE SERIES

MODEL : RB 4000

SCREW-IN

SYSTEM

Post Size : 925 x 63

(H x Dia) mm

Origin : Japan

• Un-screw anti-clock

wise to remove post

from base holder

embedded in fl oor.

• Can be chain up to

block off larger areas.

Concrete

Bollard can be removed

Base is left on floor

STAINLESS STEEL BOLLARD - PREMIUMSTAINLESS STEEL BOLLARD - PREMIUM

9

RETRACTABLE BOLLARD

MODEL : RB 5000

Post Size : 900 (H) x 113 (Dia) mm

Material : Stainless steel

Thickness : 3 mm

Bottom housing : Mild steel powder coated

Size : 1070 (H) x 160 (Dia) mm

Origin : Japan

DESCRIPTIONS

• When bollard is lowered, the protrusion

above ground is only 12mm.

• Bollard can be pulled up to block off

road access.

At pull-up position, the bollard is

self-locked.

• To lower bollard, simply turn key and lower

it slowly. Hold top handle while releasing.

Do not drop bollard when lowering.

• Refl ective strip allows better visibility in

the night.

REMOVABLE SERIES

MODEL : RB 4004

Post Size : 900 x 113

(H x Dia) mm

Thickness : 3 mm

Origin : Japan

• When bollard is

removed, base is 5mm

protrusion on fl oor.

• In emergency, the

bollard can be unlocked

and remove with a key.

Withstand certain

degree of light impact.

REMOVABLE SERIES

MODEL: RB 4007

Origin : Japan

Size : 900 x 165.2

(H x Dia) mm

MODEL: RB 4009

Origin : Japan

Size : 900 x 216.3

(H x Dia) mm

• To remove bollard,

simply un-locked

padlock.

• Twist bollard to

remove. Base is

left on fl oor

• When bollard is

removed, base

is 25mm protusion

on fl oor. Concrete

Bollard can be removed Base is

left on floor

STEEL BOLLARD

MODEL: STEEL

BOLLARD

Size :1000 x 160

(H x Dia) mm

• Concrete

fi lled internally.

• With 3M

diamond

grade

refl ective

sheeting

• Able to

withstand

up to 60/70

km/h

depending on

requirement.

ROAD REFLECTORROAD REFLECTOR

10

Comply to LTA requirement

Model : RS 1001 SWAREFLEX - ROAD STUD

Size : 100 x 100 x 19.8 (L x B x H) mm

Origin : Austria

Material : Aluminium Alloy

Refl ector color : Amber, Red, White, Green and Blue

Model : RS 1020 SWAREFLEX - CITY STUD

Size : 220 x 100 x 40 (L x B x H) mm

Origin : Austria

Material : ABS Plastic

Refl ector color : Amber

Model : DF 2002 SWAREFLEX - RUBBER FLAP

Size : 220 x 100 x 285 (L x B x H) mm

Origin : Austria

Material (Base) : ABS Plastic

Material (Flap) : Rubber

Refl ector color : Amber

Model : RS 1030 SWAREFLEX – ROAD STUD

Size : 150 x 150 x 35 (L x B x H) mm

Origin : Austria

Material : Aluminium Alloy

Refl ector color : Amber, White

RS 1040

GLOBEMARKER

RS 1025

ROAD STUDBANDI

ROAD STUD

SOLAR (HDB comply)

LINEAR POINTER 1

SOLAR

LINEAR POINTER 3

SOLAR

SR STUD

Size : 100 x 100 x 19.8 (L x B x H) mm

Origin : Austria

Material : ABS plastic

Size : 130 x 30 (Dia x H) mm

Origin : Japan

Material : Aluminium Alloy

Size : 100 x 19.8 (Dia x H) mm

Origin : Austria

Material : ABS plastic

Size : 150 x 50 (Dia x H) mmOrigin : Japan To be embedded in ground5mm protrusion above ground

Size : 150 x 25 (Dia x H) mm

Origin : Japan

25mm protrusion above ground

Size : 145 x 50 (Dia x H) mm

Origin : Japan

12mm protrusion above ground

BARRICADEBARRICADE

11

Model : EXPANDABLE BARRICADE

Size : Expanded up to 3500 mm

Height : 950 mm

Origin : Japan

Material : Aluminium (Criss-cross section)

: Coated rigid steel (2 main supports)

Weight : 9.9 kgs

Exterior : Powder epoxy coated

DESCRIPTIONS

• Criss-cross aluminium of thickness 4.5 mm, 2 main rigid steel

support to maintain stability of barricade when stretch open.

• Inter-lockable in between of barricade to barricade.

• Easy storage with removable “leg”.

DESCRIPTIONS

• UV protected to prevent color fading under hot climate.

2 years warranty .

• Inter-lockable in between of barricade to barricade.

• Easy storage with 360° rotation “leg”.

Model : PLASTIC CROWD BARRICADE

Size : 1980 x 1020 (L x H) mm

Origin : Spain

Material : PP Copolymer Plastic

Weight : 8.8 kgs

Warranty : 2 years against UV protection

STAINLESS STEEL BARRICADE

Length : 2000 x 1000 x 50 (L x H x Dia) mm

Material : Stainless Steel

MILD STEEL BARRICADE

Length : 2000 x 1000 x 50 (L x H x Dia) mm

Material : Mild Steel

Q-BELT / Q-ROPE SYSTEMQ-BELT / Q-ROPE SYSTEM

12

Model : Q – BELT

Origin : Japan

Made from stainless steel material. High resistances on corrosion & impact.

Height : 920 mm x 62.5 mm (H x Dia)

Base : 310 mm diameter

Weight : 7.5 kgs

Belt color : Red (standard Color), Blue, Black & Yellow

Belt length : 2 meters

A4 Horizontal

A4 Horizontal

A4 Vertical

A4 Vertical

A3 Horizontal

A3 Horizontal

A3 Vertical

Rope 1.5 meters

A3 Vertical

Model : Q –ROPE

Origin : Japan

Made from stainless steel material.

High resistances on corrosion & impact.

Height : 900 mm x 50 mm (H x Dia)

Base : 310 mm diameter

Weight : 8.6 kgs

SKIPPER CONNECTOR

Origin : U.K

Size : 240 x 145

(H x Dia) mm

Belt : 9 meters

Can fi t on post or safety cone.

Post Height : 1000 mm

Safety Cone : 700 mm

Skipper

Connector

NOTICE BOARD

Size : Customized

Material : Aluminium with

sliding glass.

BICYCLE PARKINGBICYCLE PARKING

13

Model : BICYCLE STAND – SINGLE

Origin : Japan

Material : Stainless steel

• Designed to park all kinds of bicycles, including mountain bikes;

racers and etc.

• With a personal lock, the owner can chain-lock their bicycles to

the stand to prevent theft.

Height : 550 mm

Width : 290 mm

Post diameter : 65 mm x 3 mm(thickness)

Base size : 100 mm x 100 mm x 2.5 mm

(thickness)

Arch : Solid rod

Arch Diameter : 12 mm

Bolting : 10 x 40 mm

DESCRIPTIONS

• NIPON modular racking system are designed for easy

customization and easy handling.

• Depending on the site spaces, the system can be

fi tted with 2 sets, 3 sets or even more sets in a row.

MAINTENANCE

• In case of any accident, damaged parts can be

replaced.

Model : MODULAR BICYCLE RACK

Origin : Japan

Material : Stainless Steel

Grade : SS304

Frame Diameter : 45 mm

Rod Diameter : 21 mm

Width : 660 mm

Height : 660 mm

Racking Size (Length)

2 systems : 620 mm

3 systems : 1240 mm

4 systems : 1860 mm

5 systems : 2480 mm

6 systems : 3100 mm

7 systems : 3720 mm

5 Rackings system

(Length : 2480 mm)

Inter-connectable

system

Permanent Bolting

bracket

WHEEL CLAMPWHEEL CLAMP

14

Model : CC 2500

Size : 475 mm length

Material : Cast Iron Powder Coated

Weight : 2.4 kgs

Locking System : Push Lock

DESCRIPTIONS

• Able to clamp sports tyre of 245 mm

• Wheel locking which takes only 10 seconds

• Red rubber protector prevent scratching

the rim during the process of clamping.

Car

Motor-Cycle

Small Lorry

Model : ST 3200

Size : 650 x 360 x 355 (L x H x B) mm

Material : Cast Iron Powder Coated

Weight : 9.5 kgs

Locking System : Padlock

DESCRIPTIONS

• Able to clamp up to 325 mm tyre.

• Designed to cover the nuts of the tyre,

indirectly preventing owner from

changing tyre when vehicle is being clamped.

Clamp Lock

CC 3500

(Class 4 & 5 lorries)

Size : 510 mm

Weight : 2.8 kgs

ST 4000

(Class 5 lorries only)

Size : 1000 mm

Weight : 25 kgs

CONTAINER

CLAMP LOCK

(Container only)

Size : 80 mm

Weight : 0.5 kgs

SAFETY CONE

with CLAMP SIGN

Height : 900 mm

Weight : 2.5 kgs

SIGNAGESIGNAGE

15

SG 75 SG 78

SG 76 SG 77

SG 74

S1-Galvanized

Post for sign50x50x2000 mm

S2-Galvanized

Portable Sign Postpost 50x50x2000 mm

Base 450x450 mm

S4-Galvanized

Post with base for

concrete installationpost 50x50x2000 mm

Base 200x200 mm

S3-Stainless steel trolleyHeight 1100 mm With 4 castor wheels

(include 2 lockable wheels)

CONSTRUCTION PRODUCTCONSTRUCTION PRODUCT

16

CONE 1000 PVC

Unbreakable

Height : 1000 mm

CONE 700 PVC Unbreakable

CONE 700 Hard Plastic

Height : 700 mm

RETRACTABLE CONE

Height : 450 mm

EXTENSIBLE

CONE BAR

Length : 2 to 3 meters

NYLON VEST

Free Size

COTTON VEST

Free Size with pocket

TRAFFIC GLOVE

Free Size

SQUARE CONE

Height : 1100 mm

Material : Plastic

PLASTIC FLOOR SIGN

Height : 600 mm

Material : Plastic

BLINKING LIGHT / REFLECTORSBLINKING LIGHT / REFLECTORS

17

BLINKER FL7001

Battery : 2 x 6 volts

BLINKER FL7005

Battery : 2 x 1.5volts D-size

BLINKER FL7006

Battery : 2 x 1.5volts D-size

BLINKER FL 7001 SOLARBLINKER FL7004Magnet baseBattery : 2 x 1.5volts D-size

BLINKER FL7007

Magnet base

Battery : Rechargeable type

Color : Amber, Red, Green, Blue

HAND BATON

Length : 540 mm

Battery : 2 x 1.5volts C-size

HAND BATON (5 mode)

Length : 400 mm

Battery : 2 x 1.5volts D-size

SECURIC LIGHT

Length : 200 mm

Heavy duty, impact tested

MEASURING WHEEL

Distance : Up to 10 km

REFLECTOR

ROUND

Size : 80 mm

REFLECTOR

GLASS BEADS

Size : 51 mm

REFLECTOR

RECTANGULAR

Size : 100 x 60 mm

REFLECTOR

TRIANGLE

Size : 110 x 70 mm

REFLECTOR

WINDMILL

Size : 115 mm

REFLECTOR

ROTATING

Size : 130 mm

REFLECTOR

SOLAR

Size : 105 x 35 mm

INSPECTION MIRROR / TYRE PUNCTURE DEVICEINSPECTION MIRROR / TYRE PUNCTURE DEVICE

18

INSPECTION MIRROR STAINLESS STEEL

Size : 370 x 300 x 102 (L x B x H) mm

Origin : Japan

Led Light : 1 no.

Wheels : castor bearing x 4 nos.

DESCRIPTIONS

• High quality stainless steel material.

• Float glass mirror. Refl ects 150% better

than normal mirror.

• Re-chargeable Led light.

• 360° rotation castor wheels.

ADVANTAGE

• Can refl ect middle of under-carriage

clearly.

INSPECTION MIRROR LIGHT WEIGHT

Diameter : 325 mm

Handle : 770 mm

Origin : Japan

Torch : 1 no.

Wheels : Castor bearing x 3 nos

DESCRIPTIONS

• Light weight made of polymer plastic.

• Acrylic convex mirror allows wider

coverage.

• 360° rotation castor wheels.

TYRE PUNCTURE DEVICE - SPIKER

Stretch Length: 9.5 meters

Origin : Japan

DESCRIPTIONS

• Individual spikes are fi tted

onto device.

• When car hit the device,

the individual spikes are

pull out.

WHEEL CHOCK / KERB CONNECTOR / AUTO CAR-LOT RESERVEWHEEL CHOCK / KERB CONNECTOR / AUTO CAR-LOT RESERVE

19

WHEEL CHOCK

Size : 270 x 120 x 180 (L x B x H) mm

Origin : Japan

Material : Rubber

Weight : 3 kgs

KERB CONNECTOR

Size : 500 x 430 x 110 (L x B x H) mm

Origin : Japan

Material : Rubber

Weight : 10 kgs

AUTO CAR-LOT RESERVE

Size : 470 x 400 x 95

(L x B x H) mm

Upright Height : 370 mm

Origin : Japan

Material (arch) : Aluminium

Material (Chasis) : Coated Hardened Steel

Remote Control : 2 nos.

Battery : 2 nos.

DESCRIPTIONS

• No wiring required for installation. Operate with

re-chargeable batteries.

• Re-Charge every 2 months depending on usage.

• Alarm raises when the lot being illegally parked.

• Low battery notifi cation with warning on unit.

• 1 remote control only work for 1 unit.

• Manual operation is possible when battery runs fl at.

ANTI SLIP STRIP/ THERMO-SHEETING / ROAD PAINTINGANTI SLIP STRIP/ THERMO-SHEETING / ROAD PAINTING

20

ANTI SLIP STRIP

ALUMINIUM

Width : 62 mm

Length : 1000 mm

Thickness : 2.5 mm

SHEETING

Thickness : 0.5 mm

DESCRIPTIONS

• Installation can be done with using bolting system for more durability.

• It can be installed with adhesive material

• 3 different colors of strip.

• Long lifespan of up to 20 years.

• Able to withstand water-jet during washing.Black Beige Red

THERMO SHEETING

Width : 100 mm

Length per roll : 40 meters

Thickness : 2 mm

Refl ectivity : Glass beads

• Glue on with any adhesive

• Easy installation and removal

• Highly abrasive

THERMOPLASTIC PAINTING

• All kinds of requirements

• With glass beads refl ectivity

REFERENCEREFERENCE

21

BUMPER STRIP

F 1 race track

RUBBER ROAD HUMP

Land Transport Authority road

SAFETY MIRROR

Land Transport Authority road

CORNER GUARD

OUE building – Shenton Way

WHEEL STOPPER

Singapore Island Country ClubWALL PROTECTION BUMPER

Port of Singapore Authority

REMOVABLE / FLEXI BOLLARD

Land Transport Authority road

STAINLESS STEEL BOLLARD

Ngee Ann Polytechnic

Tel : +(65) 6 363 3533

Fax : +(65) 6 362 2422

Email : [email protected]

Website : www.asiaagencies.com

27, Mandai Estate, #02-06

Innovation Place Tower 2

Singapore 729931

Edition 2013/2014

SHELL STATION

MANDAI LINK

MANDAI ROAD

WO

OD

LAN

DS

RO

AD

TURF CLUB

TO K

RA

NJI

TO

UP

PE

R B

UK

IT T

IMA

AH

MANDAI ESTATE

SUNGEI KADUT AVE

SUNGEI KADUT ESTATE

INNOVATION PLACE TOWER 2

(ASIA AGENCIES)