Ron-Son’s Torch Repairs & Sales Winter Special
Transcript of Ron-Son’s Torch Repairs & Sales Winter Special
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
Ron-Son’s Torch Repairs & Sales
Winter Special
INDEX
Pages 1 - 5 Page 6 & 7
MIG Machines
Pages 8 & 9
TIG Machines
Multiprocessor Machines
Accessories
Pages 10 - 12Pages 9 & 10
Wire Feeders
Pages 12 - 17
Plasma Machines
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
MIG
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice. 1
Millermatic® 252 MIG Welder -200(208)/230V907321
Welds material from 22 gauge to 1/2 in thick in a single pass. Highest output in its class.
Millermatic® 212 Auto-Set™ MIG Welder907405
$3,074.78 $3,796.80
All-in-one wire welder that welds material from 22 gauge to 3/8 in. thick, in a single pass.
$3,915.66 $4,841.20
$8,801.80 $7,367.36
Millermatic 350P 200/230/460V 60Hz 1/3Ph907300
First single- or three-phase power Millermatic that welds material from 22 gauge to 1/2 in thick in a single pass. Perfect for fabrication, manufacturing, maintenance and repair.
WHAT'S INCLUDED• Deltaweld® 350 with ArcConnect™• Intellx™ Wire Feeder• Bernard BTB 300A• .035/.045 in. V-groove drive rolls• Deltaweld® 350 Running
Gear/Cylinder Rack
• Feeder Swivel Kit• Cart Accessory Kit• ArcConnect™ Control/
Motor Cable 9ft.
MIG
2
Deltaweld® 350 230/460V MIGRunner™ with Intellx Feeder951792
The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
Quality-engineered cable management, protects your connections on the Integrated Migrunner package to keep you productive.
ArcConnect™ a next generation communication that utilizes high speed signals to improve weld performance and allow point-of-use controls to be located at the feeder.
Deltaweld®951301 [452 Stationary PKG] 951239 [652 Stationary PKG]
$11,959.81 $14,288.40
Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100 percent duty cycle for extended arc-on time.
951239 [652 Stationary PKG] 951301 [452 Stationary PKG]
$12,794.60 $10,709.45
$10,206.73 $12,194.00
WHAT'S INCLUDED• .035 - .045 reversible dual V drive rolls• 15ft 4/0 work cable with 600A C-Clamp• 3ft gas hose• 6ft 4/0 wire feeder to power source weld cable• Bernard™ BTB Gun 400 AMP, 15FT• Centerfire contact tips, .035 (QTY 3), .045 (QTY 2)• Deltaweld• Regulator/flowmeter• S-74D Feeder
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
MIG
3
PKG,INTELLX, Q3015 ,DR ROLL KIT951783
Deltaweld® 350 230/460V MIGRunner™ with Intellx™Pro Feeder951777
$10,675.47 $12,754.00
The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
$2,920.23 $3,488.80
$5,600.00 $4,687.36
Deltaweld® 350 230/460V With ArcConnect™907747
The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
PKG,INTELLX PRO, Q3015 ,DR ROLLKIT951784
$4,048.80 $3,388.96
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
MIG
4
PKG,Continuum™ 350 MIGRunner951671
New generation of advanced industrial welding solutions improves productivity through weld quality, ease of use and system flexibility.
Deltaweld® 350 230/460V With ArcConnect™ and 14pin907747001
$4,921.73 $5,880.00
The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
$15,617.12 $18,657.80
$21,574.00 $18,058.07
PKG,Continuum™ 500 MIGRunner951672
All-new power source design smart and powerful digital design has the fast response needed to deliver the most stable welding performance for better welding results. Developed as a platform to meet current and future needs with integrated expansion capabilities.
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
MIG
5
Continuum™907636 [350] 907640 [500]
$8,407.96 $10,045.00
New Weld ProcessesVersa-Pulse™ is a fast, low-heat, low-spatter process resulting in faster travel speeds and increased productivity for semi-automated and automated welding. Typically used on thin materials up to 1/4 inch., great for gap filling on sheet metal and tube applications.
High-Deposition MIG offers higher deposition rates than standard spray transfer — resulting in faster welding and increased productivity. Typically used for thicker material and larger welds (6 to 8 mm).
$4,833.84 $5,775.00
$12,961.20 $10,848.90
907636 [350] 907640 [500]
Continuum™ Feeder (Single)951631
Advanced, industrial wire feeder with Tru-Feed™ technology improves productivity through weld quality, ease of use and system flexibility. Designed for use with a Continuum power source.
New low-inertia motor provides faster response for the best arc starts with the least amount of spatter.
Balanced-pressure drive-roll design and tensioners. Feed wire in its truest and straightest form for better feedability, resulting in better welding performance.
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
6
Pipeworx 350 Fieldpro (TWECO)907533
Multiprocess Welder, Piperworx FieldPRO 350, 1 Phase, Input Voltage 240/575, Input (Amps) 14.1/36.1, Rated Output 350A @ 34VDC,60 Percent, OCV 75, 50/60 Hz, Auto-Line, Superior Arc Performance, Easy to Use, Onsite Pipe Welding, Stick, DC TIG, MIG, RMD, Pulsed MIG, Overall Height (In.) 17, Overall Width (In.) 12, Overall Depth (In.) 22, Includes Power cord
XMT® 350 FieldPro™, Dinse®907730002
$7,257.21 $8,670.20
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line! • Help operators spend more time welding, less time walking • Increase productivity, safety and equipment uptime • Perfect for process pipe, structural welding, pipelines and shipbuilding • Produce exceptional arc performance and weld quality
$8,804.04 $10,518.20
$9,035.60 $7,563.06
Dimension™ 452 230/460/575 V903255
Designed for heavy industrial welding applications, with 100 percent duty cycle for extended arc-on time.
MULTIPROCESSOR
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
7
Maxstar® 161 STL 120-240 V, X-Case, Contractor Package907710001
Best of class - Provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.
XMT® 350 CC/CV, Dinse907161
$6,683.06 $7,984.20
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 350 CC/CV is the most popular model for its flexibility and simplicity.
$2,907.80 $2,355.60
MULTIPROCESSOR
TIG
WHAT'S INCLUDED• Maxstar® 161 STL• 6.5 ft. (2 m.) primary cords for 120 V and 240 V• 13 ft. (4 m.) stick electrode holder with 25 mm.
Dinse-style connector• 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye
connector• Adjustable handle/shoulder strap• 12.5 ft. (3.8 m) Weldcraf`t™ A-150 TIG torch• Regulator/flow gauge and gas hose• AK2C accessory kit• Protective Miller® X-Case™ (301429)• Quick Reference Guide
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
8
Dynasty® 210 DX 120-480 V, Foot Control Complete Package951668
A perfect combination of sophisticated inverter technology and advanced features, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.
Maxstar® 210 120-480 V907683
$4,150.66 $4,958.80
Industry standard - Miller Electric pioneered the Maxstar-type market, now we've perfected it. The Maxstar 210 Series provides a solution for a variety of needs; from simple to fully automated.
$4,110.39 $5,244.40
$10,570.00 $8,569.33
Syncrowave® 210 TIG MIG Spoolmate™ 150 Package951684
The easy-to-use Syncrowave® 210 provides legacy arc performance that allows you to expand your capabilities with an all-in-one package.
TIG
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
TIG
9
Dynasty® 400 208-575 V, Foot Control Complete Package951694
$14,747.62 $17,619.00
Latest technology - powerful, compact AC/DC inverter delivers superior arc performance with total AC arc-shaping capabilities. Auto-Line™ allows connection to any voltage or frequency in the world while using half the power of a conventional machine.
$2,101.11 $2,594.20
Spectrum® 375 X-TREME™ with XT30 Torch907529
WHAT'S INCLUDED• Spectrum 375 X-TREME• XT30 hand-held torch with 12-ft. (3.7 m) cable• Heavy-duty work clamp with 12-ft. (3.7 m) flexible cable• 10-ft. (3 m) MVP™ power cord• MVP plugs 5-15P (120 V, 15 A), 6-50P (240 V, 50 A)• X-CASE provides protection in transport and strorage• Shoulder Strap• Consumables box with 2 electrodes, 2 tips, deflector, and air
fitting
PLASMA
Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
PLASMA
10
$2,964.13 $3,654.00
Spectrum® 625 X-TREME™ 20-ft. XT40 Quick Connect907579001
Powerful 40 amps cuts up to 5/8 inch mild steel and weighs only 21 lbs. X-CASE provides ultimate protection during transport and storage.
S-74D (Single)951198
Standard, simple feeder for most heavy-industrial applications providing increased accuracy and control of the most common weld parameters.
Spectrum® 875 Auto-Line907584
$4,181.21 $5,152.00
Compact, 54 lb, multi-voltage (208-575V 1/3PH) unit cuts up to 7/8” mild steel.
$4,390.40 $3,674.89
WIRE FEEDERS
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
11
$2,620.24 $3,130.40
S-74S (Single)951196
Standard, simple feeder for most heavy-industrial applications.
20 Series Wire Feeders951779
Simple and cost-effective four drive roll wire feeder for industrial manufacturing and fabricating.
$2,340.80 $1,959.32
$2,663.59 $3,182.20
20 Series Wire Feeders301499001
Simple and cost-effective four drive roll wire feeder for industrial manufacturing and fabricating.
WIRE FEEDERS
ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg951729
$3,482.71 $4,160.80
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
WIRE FEEDERS
12
ArcReach® Smart Feeder, Bernard™ PipeWorx 300 Amp Gun Pkg951733
ArcReach Smart Feeder system delivers excellent RMD® and Pulse MIG, MIG and Flux-Cored welding up to 200 feet away from the power source with no control cables. This system automatically shifts all controls to the Smart Feeder including weld process selection, material type and wire diameter, gas type, wire feed speed and voltage.
$198.00 $224.20
$9,004.80 $7,537.28
Weldmark Digital HelmetWEM B45
Weldmark Welding Helmet; Series: Pro; Filter: Digital Auto Darkening; Color: Black; Lens Shade: 5 - 13
ACCESSORIES
Contractor TIG TorchCK CKC1525VH
Rigid head with valve 1 piece 25ft. Gas cooled150 amp ACHF or DCSP @100% 7-3/4” (19.6cm) 4-1/2oz (127g)3 Series Head accessories Stainless steel head
$384.00 $307.00
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
13
Magnetic TIG Torch HolderC-K MTH15
Magnetic base for easy attachment to any metal surfaceAttaches vertically or horizontally to fit your needProtects torch and consumables
Trim Line TIG TorchC-K TL2125HSF RG
$319.00 $385.00
Ridged head 1 piece 25ft. Gas-Cooled200amp ACHF or DCSP @100%8-1/8” (20.6cm) 5oz (141g)3 series head accessories
$62.40 $78.00
$39.00 $29.95
Light Duty Flowmeter RegulatorWEM-FLOWMTRLD
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
14
Regulator AcetyleneWEM-AREGMD
TIG Stick OutCK TG1
$36.00
The CK tungsten stick out gauge helps the user set the correct tungsten tip length. Setting the correct tip length ensures a consistent quality to every weld. This gauge eliminates tungsten contamination by keeping the tungsten in the gas stream and prevents undue stress on the ceramic gas nozzle.
The stick out gauge is used by loosening the knurled lock nut, then turning the threaded gauge to desired depth (1/16" increments). Simply lock the gauge by turning the knurled lock nut firmly back against the gauge body.
$85.00 $68.00
ACCESSORIES
Features• 1/16" (1.6mm) Markings• Knurled Lock Nut• Threaded Gauge Rod• Keyring and Carabiner Attachment
$68.00 $85.00
Regulator OxygenWEM-OREGMD
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
15
Revco 850L GloveREV-850L
Welding TableVAL-TS3020
The Nomad Economy Welding Table is engineered to provide a safe, transportable, affordable, and versatile welding surface.Three 1.1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table.Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility.Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges.Tabletop height can be adjusted from 26″ to 32″ (660 – 810 mm).Table moves about the work area on 2 sturdy casters.
PREMIUM GRAIN ELKSKINConstructed of Black Stallion® elkskin leather -extra-thick for superior heat, flame, and abrasion resistance
FEATURES & BENEFITS• Premium grain elkskin leather provides superior
comfort with natural insulation• Dupont® Nomex lined back offers extra fire-
resistant protection• Reversed grain palm provides a softer feel against
the hand with improved grip• Thumb strap provides extra reinforcement in a key
stress area• Kevlar® stitching provides spark and abrasion
resistance
ACCESSORIES
$29.99 $39.95
$235.11
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
16
Walter Ceramic SprayWAL-53F912
Extend the life of welding nozzles and reduce downtime spent scraping out spatter with E-WELD Nozzle. This highly concentrated anti-spatter evenly coats the exterior and interior surface of your welding nozzle to prevent spatter from adhering to the nozzle. This prevents obstructions and allows the gas to flow freely, resulting in a higher quality weld. This is an extremely economical solution, as the easy applicator dispenses a thin layer that can provide protection for up to 8 hours. This is an ideal solution for MIG welding, plasma cutting and laser cutting as the E-WELD Nozzle can withstand high temperatures (up to 1832° F) and reduce your consumable spend.
Bessey Ground ClampBES-TP1K
ACCESSORIES
With malleable cast iron arms Tommy bar with rounded ends for simple transfer of force when clamping Grounding connection hole in the upper part
$52.70
$37.50
Miller Safety GlassesMIL-272187
Optimal eye coverage with increased comfort and style.
$5.60
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
17
Bessey Magnetic GroundBES-MGC1 [250 amp] BES-MGC2 [800 amp]
Quality magnetic square for easy set upsSize of magnet approx. 3.5 In x 2 In
MGC-2 $45.74
ACCESSORIES
MGC-1 $39.75
Pricing in effect until May 31st, 2019 or while quantities. All prices are subject to change, may vary without prior notice.
FLAMETECH 48" Torch-FuelFLM-6248F70
Flame Tech 8600 Series 48" Heavy Duty Cutting Torch with 70 deg solid bronze head with support tube has a cutting capacity of 36" and is designed for use with alternative fuel gas. Cutting torch uses TRI or BI-METAL designed nozzles and is sui for heavy cutting in scrap yards as well steel mill operations. Multi-tasking cutting torch featuring three stainless tubes in triangular format has knurled brass handle for long lasting durability. Cutting torch uses common C-size oxygen supply and B-size fuel supply to minimize the hose and regulator requirements. Cutting torch is easy to operate and provides maximum strength, greater rigidity with less maintenance. Cutting torch with reduced flashback features single lever actuated torch control and is ideal for rugged environments.
Product Attributes• Apparatus Type-Torch• Fuel Gas-Alternate Fuels• Cutting Capacity-36”• Workload-Heavy Duty• Length-48”• Torch Head -70• Cutting Lever Location-Top• Use With-8600 Series Torches• Uses Tip Series-BM80-TM80• Fitting Type-B Fuel-C Oxygen
TRADE IN YOUR OLD TORCH FOR 20% OFF
$523.55