the key to a better tomorrow - Ron-Son’s Torch · 2019. 8. 15. · WELDMARK TURBO GOSS PRESTOLITE...

www.weldmark.com Phone: 317-562-1483

the key to a better tomorrow...

Manufacturer Page• Weldmark Air/Fuel HVAC Equipment ..............2-6• Weldmark Aluminum Filler Metals ......................7• Weldmark Arc Welding Accessories .....................8• Weldmark Balloon Infl ators .............................9-10• Weldmark Coil & Wrap ...................................... 11• Weldmark Clothing Apparel Gloves ...................................................12-14 Head Wear .................................................15 Outer Wear ...........................................16-19• Weldmark Cutting Tips ..................................20-24• Weldmark Cylinder Wrenches ............................24• Weldmark Extension 8/3 Cord ............................24• Weldmark First Aid Kits .....................................25• Weldmark Flashback Arrestors ...........................25• Weldmark Gas Apparatus ..............................26-28• Weldmark Gauges ..........................................29-30• Weldmark Guarantee ............................................1• Weldmark Headgear Visors & Knee Pads .....31-32• Weldmark Hose Repair Kits ...............................33• Weldmark Industrial Chemicals ....................34-37• Weldmark Lenses ...........................................38-39• Weldmark Marking Tools & Accessories ......40-44• Weldmark MIG Guns & Consumables ..........45-53• Weldmark Carbon Arc Torches ...........................54• Weldmark Carbon Rods ......................................54• Weldmark Plasma Consumables ....................55-59• Weldmark Pipe Stand .........................................60• Weldmark Scratch/Acid Brushes ........................61• Weldmark Spark Lighters & Flint Renewals ......62• Weldmark Tig Torches ...................................63-68• Weldmark Tungsten ............................................69• Weldmark Water Recirculator.............................70• Weldmark Weld Blankets ...................................71• Weldmark Wire - ER70S6 ..................................72• Weldmark Handler Consumables .......................73

Manufacturer Page• American Cap “Snap Caps” ................................73• ArcOne ................................................................73• Channellock ........................................................74• Direct Wire & Cable, Inc. ............................. 11, 75• Dynafl ux NDT/Coolers/Oven/Lens ....................76• Empire ...........................................................77-78• Frontier Paper & Packaging ...............................79• G.C. Fuller ..........................................................79• Gordon Sales .....................................................79• Files: PFERD & Simonds ...................................80• International Cryogenics, Inc. ............................81• Interstate Battery ................................................82• Irwin (Vise Grips) ..........................................83-84• Lenco .............................................................85-87• Lockjaw ..............................................................88• “Mag-Safe” Magnifi er Spectacles .................89-90• MB Industries .....................................................91• Miller/Hobart Replacement Parts .......................92• Moldex ...........................................................93-96• Resource Catalog ................................................97• Parker Welding Hose ..........................................98• Pelican Products .................................................99• PFERD/Milwaukee Brush .........................100-103• Quiet Cast (stretch fi lm) ...................................104• Ray-O-Vac ........................................................104• SKM Industries .................................................105• Starrett ..............................................................105• Sumner ..............................................................105• Superior Products, Inc. ..............................106-110• Tempil ............................................................... 111• Tuff Nougies ..................................................... 112• Victor .........................................................113-115• Welding Material Sales (Blue Demon) ......116-118

Note: This Product Catalog should be crossed referenced with the IWDC Warehouse Price Catalog.

NOTE: ANY COMBINATION OF ANY PRODUCT, EXCEPT WELDMARK® ER70S6 WIRE (PAGE 72), IN THE WAREHOUSE OF $600 OR MORE IS PREPAID. ORDERS FOR WELDMARK® ER70S6 WIRE (PAGE 72) 2376 LBS (ONE PALLET) OR MORE ARE PREPAID.

Order Fax: 317-549-4570 www.weldmark.com


Weldmark GuaranteeAll Weldmark products are backed by a 100% guarantee from the IWDC.

If for any reason you are not satisfi ed with the quality of any Weldmark product, you may return it for full credit or exchange.

The IWDC Corporate Staff and Committees have researched and negotiated to bring you quality products at competitive prices, and we take great pride in these products.

The IWDC Corporate Staff and Committees have worked with each of the vendors supplying our private label products to insure that strict specifi cations are adhered to, and that each vendor will stand behind their products.

WELDMARK MANUFACTURERS WARRANTY

All Weldmark products will be covered by the Manufacturers standard product warranty.

Weldmark® is a registered trademark of the Independent Welding Distributors Cooperative, Inc.



2

Snap-in style High-Output tips(Use with Weldmark handle WM300224) These tips use a unique mixer that “swirls” the acetylene to generate a hotter fl ame. Made from heavy-duty stainless steel and brass with a snap-in inlet that is interchangeable with other quick disconnect style tips.

ACETYLENE SOLDERING & BRAZING EQUIPMENT

WM300101-“B” Air/Acetylene Standard KitWM300102-“MC” Air/Acetylene Standard Kit(Screw-in Style Tips) An economical kit that includes everything you need to get started. The torch handle interchanges with all other brands and accepts a full series of Weldmark tips. Kit includes torch handle with front mount valve, screw-in tip model WM300113, regulator, 12 foot hose, sparklighter and cylinder wrench.

Screw-in Style Standard Tips(Use with Weldmark Handle WM300121) Economical screw-in style tips produce a quiet adjustable fl ame for soft soldering and light brazing.

Tip No. Flame Diameter Soft SolderWM 300112 1/8” 1/8” - 1/4”WM 300113 3/16” 1/4” - 1/2”WM 300114 1/4” 1/2” -1”

WM 300121 Screw-in style handle Ergonomically designed handle with front-mount valve makes one-handed operation more comfortable. Uses standard 3/8-24 LH “A” size hose fi tting and interchanges with all leading competitive torches and screw-in tips.

Acetylene “B” and “MC” Regulators Manufactured from solid brass for long life and safety. Inlets have fi lters to prevent contaminants from entering and outlet is an “A” fi tting.

Regulator No. Inlet FittingWM 300501 “B” Cylinder ConnectionWM 300502 “MC” Cylinder Connection

WM 300701 Acetylene 12’ HoseMade from quality 7/16” O.D. x 3/16” ID single ply fabric reinforced Grade R hose. Includes “A” fi ttings on each end.

Kit No. Tip(s) Included Regulator InletWM300203 WM300213, WM300211 “B” CylinderWM300205 WM300215 “B” CylinderWM300206 WM300215 “MC” Cylinder

Tip No. Flame Diameter Soft Solder Silver BrazeWM300213 1/4” 1/4” - 1” 1/8” - 1/2”WM300215 5/16” 3/4” - 1 1/2” 1/4” - 3/4”WM300218 3/8” 1” -2 1/2” 1/2” - 1”WM300211 7/16” 1 1/2” - 3 1/4” 3/4” - 1 1/2”WM300214 1/2” 2” - 4” 1” - 2”

WM 300224 - Snap-in style Acetylene Handle The special quick disconnect fi tting allows rapid tip changes and accepts all competitive snap-in style acetylene tips. Uses rear-mount valve and “A” inlet fi tting.

Air/Acetylene High-Output Kits(Snap-In Style Tips) These kits are designed for the professional looking for a hotter fl ame, and up to 30% reduction in brazing time over our screw-in style tips. Supplied with solid brass regulator; stainless steel turbine-fl ame tips, snap-in style torch handle and 12’ hose.



3

WM300304 Air/Propane High-Output Kit This high-output propane kit includes our special “swirl” designed tip for maximum heat output and faster soldering. Included in the kit are the Weldmark WM300324 snap-in handle, WM300314 stainless steel tip, solid brass regulator and 12’ hose.

Snap-In style High-Output Tips A unique mixer “swirls” the propane to generate a hotter fl ame that can reduce brazing time by 30%. Made from heavy-duty stainless steel and brass with a snap-in connection that interchanges with competitive quick disconnect style tips.

Tip No. Flame Diameter

Soft Solder Silver Solder

WM300313 7/16” up to 1” up to 1/2”WM300314 1/2” up to 1 1/2” up to 3/4”WM300315 3/4” up to 3” up to 1 1/2”

WM 300704 - Propane 12’ hose A high quality fl exible hose designed for use with propane. Standard 9/16 - 18LH “B” inlet fi ttings at both ends.

WM300503 Propane RegulatorManufactured from solid brass for long life and safety. CGA 510 with gauge.

WM 300324 Snap-in style propane handle A special quick disconnect fi tting allows quick tip changes and accepts all competitive snap-in style propane tips. Includes rear-mounted needle valve for accurate control and 9/16-18-LH “B” inlet hose connection.

Torch No. Self Ignitor Brass Regulator Tip Style Tip MaterialWM300901 no yes High-output Stainless steelWM300902 yes yes High-output Brass

PROPANE SOLDERING & BRAZING EQUIPMENT

Torches for Disposable Cylinder High-Output These torches are popular for everything from work around the house to commercial soldering and brazing jobs. The built-in solid brass regulator gives you accurate fl ame control while the 360° swivel tip rotates to any position for hard to reach areas. Both use our turbine “high-output” tip design that reduces labor time by up to 30%. And whether you choose our standard torch or the convenience of a push button self-igniting tip they both work with either propane or MAPP® gas.



4




5

WM 300909 - Brass Hand Torch Made from the fi nest brass materials, this economical torch head fea-tures accurate needle valve adjustment, use with propane or MAPP® gas, and has soft soldering capabilities.


Part Number Comparison on Weldmark Plumbing & HVAC Equipment

Handles/Torches

WELDMARK TURBO GOSS PRESTOLITE UNIWELD DESCRIPTION

WM300121 WA-400 HAS BACK VALVE

AA-1 401-M TH-9 Handle acetylene, front valve for screw-in tips

WM300224 G-4 GG-4 QD #1 TH-6 Handle for acetylene snap-in tips rear valve, A fitting

WM300324 H-4 GH-4 QD #1 (HAS “A” FITTING) TH-6B Handle propane, snap-in tips rear valve, B fitting

WM300909 TP-10 GP-9 — PCV25 Torch soldering for disposable cylinder

WM300901 STK-9 GP-360R 17145 Tri Flame Kit RP2-T4 Torch brazing for disposable cylinder

WM300902 STK-99 GP360L — — Torch brazing with swivel ignitor for disposable cylinder

Tips


WM300112 S-2* BA-2 638948* S-22 Tip acetylene, feather flame, screw-in, fine

WM300113 S-3 BA-3 10 X 23 S-23 Tip acetylene, feather flame, screw-in, medium

WM300114 S-4 BA-4 10 X 24 S-24 Tip acetylene, feather flame, screw-in, large

WM300213 A-3 GA-3 QD-SJ-OA* A-3 Tip acetylene, snap-in, x-fine

WM300215 A-5 GA-5 QD-SJ1A/2A* A-5 Tip acetylene, snap-in, fine

WM300218 A-8 GA-8 QD-SJ-3A A-8 Tip acetylene, snap-in, medium

WM300211 A-11 GA-11 — A-11 Tip acetylene, snap-in, large

WM300214 A-14 GA-14 QD-SJ-4A — Tip acetylene, snap-in, x-large

WM300313 T-2 GT-3 QDSJ3LPG — Tip propane, snap-in, fine

WM300314 T-4 GT-4 QDSJ4LPG — Tip propane, snap-in, medium

WM300315 T-6 GT-5 QDSJ5LPG — Tip propane, snap-in, large

*Closest size

Regulators


WM300501 AR-B EA-1G R-411B/R-511B RB Regulator B cylinder, A outlet

WM300502 AR-MC EA-2G R-411MC/R-511MC RMC Regulator MC cylinder, A outlet

Kits


WM300101(1) WSF-4 KA-1H 30 X 37 K-37 Kit for B acetylene, feather flame

WM300304 LP-3 KLP-4 LP-3 — Kit propane snap-in tip

**WM300801 Victor HS-101 KP-201-A (Western ** WB101/102) — Kit torch propane heating with flow adaptor

WM300203 X-3B KX-3B X-3B 89600 Kit acetylene with snap-in tips (B regulator)

WM300205 X-5B KX-5B X-5B — Kit acetylene with snap-in tip (B regulator)

WM300206 (Has 1 tip)

X-5MC KX-5MC X-6MC — Kit acetylene with snap-in tip (MC regulator)

Hose


WM300701 AH-12 HA3-12 501F12 H-12 Hose acetylene, 12 ft. AA fittings

WM300704 H-12 HEF-12 90F50 (AA fittings) HLP14B Hose propane, 12 ft. B fittings

**Western number cross reference WB-101 (cast iron head) or WB-102 (steel head)(1)Includes striker and wrench. (For kit with “MC” regulator, order WM300102).



6

WM 300801Propane Heavy Duty High-Output Torch This heavy duty torch kit can be used for weed burning, drying, general heating, melting, roofi ng or anywhere requiring large volumes of outdoor heat. For use with vapor propane only. Kit in-cludes torch, fl ow adapter, 10’ hose and lighter.

Length Weight Approximate Max BTU’s

Tip Diameter

31” 1 3/4 lbs 500,000 2 1/8”




7

Part# Description Std. Pkg.WEM 5356-030-WA Wire, MIG ER5356 .030 X 1 lb Spool ......................................................................................... 1WEM 5356-035-WA Wire, MIG ER5356 .035 X 1 lb Spool ......................................................................................... 1WEM 5356-047-WA Wire, MIG ER5356 3/64 X 1 lb Spool ......................................................................................... 1WEM 5356-030-WS Wire, MIG ER5356 .030 X 12 lb Spool ..................................................................................... 12WEM 5356-035-WS Wire, MIG ER5356 .035 X 16 lb Spool ..................................................................................... 16WEM 5356-047-WS Wire, MIG ER5356 3/64 X 16 lb Spool ..................................................................................... 16WEM 5356-062-WS Wire, MIG ER5356 1/16 X 16 lb Spool ..................................................................................... 16WEM 4043-030-WA Wire, MIG ER4043 .030 X 1 lb Spool ......................................................................................... 1WEM 4043-035-WA Wire, MIG ER4043 .035 X 1 lb Spool ......................................................................................... 1WEM 4043-047-WA Wire, MIG ER4043 3/64 X 1 lb Spool ......................................................................................... 1WEM 4043-030-WS Wire, MIG ER4043 .030 X 12 lb Spool ..................................................................................... 12WEM 4043-035-WS Wire, MIG ER4043 .035 X 16 lb Spool ..................................................................................... 16WEM 4043-047-WS Wire, MIG ER4043 3/64 X 16 lb Spool ..................................................................................... 16WEM 4043-062-WS Wire, MIG ER4043 1/16 X 16 lb Spool ..................................................................................... 16WEM 5356-062-WO Rod, TIG ER5356 1/16 X 10 lb (Bulk) ...................................................................................... 10WEM 5356-094-WO Rod, TIG ER5356 3/32 X 10 lb (Bulk) ...................................................................................... 10WEM 5356-125-WO Rod, TIG ER5356 1/8 X 10 lb (Bulk) ........................................................................................ 10WEM 5356-062-W1 Rod, TIG ER5356 1/16 X 1 lb Tube (20 TubeS/BX) ................................................................. 20WEM 5356-094-W1 Rod, TIG ER5356 3/32 X 1 lb Tube (20 TubeS/BX) ................................................................. 20WEM 5356-125-W1 Rod, TIG ER5356 1/8 X 1 lb Tube (20 TubeS/BX) ................................................................... 20WEM 5356-062-W3 Rod, TIG ER5356 1/16 X 3 lb Tube (8 TubeS/BX) ................................................................... 24WEM 5356-094-W3 Rod, TIG ER5356 3/32 X 3 lb Tube (8 TubeS/BX) ................................................................... 24WEM 5356-125-W3 Rod, TIG ER5356 1/8 X 3 lb Tube (8 TubeS/BX) ..................................................................... 24WEM 4043-062-WO Rod, TIG ER4043 1/16 X 10 lb (Bulk) ...................................................................................... 10WEM 4043-094-WO Rod, TIG ER4043 3/32 X 10 lb (Bulk) ..................................................................................... 10WEM 4043-125-WO Rod, TIG ER4043 1/8 X 10 lb (Bulk) ........................................................................................ 10WEM 4043-062-W1 Rod, TIG ER4043 1/16 X 1 lb Tube (20 TubeS/BX) ................................................................. 20WEM 4043-094-W1 Rod, TIG ER4043 3/32 X 1 lb Tube (20 TubeS/BX) ................................................................. 20WEM 4043-125-W1 Rod, TIG ER4043 1/8 X 1 lb Tube (20 TubeS/BX) ................................................................... 20WEM 4043-062-W3 Rod, TIG ER4043 1/16 X 3 lb Tube (8 TubeS/BX) ................................................................... 24WEM 4043-094-W3 Rod, TIG ER4043 3/32 X 3 lb Tube (8 TubeS/BX) ................................................................... 24WEM 4043-125-W3 Rod, TIG ER4043 1/8 X 3 lb Tube (8 TubeS/BX) ..................................................................... 24

ALUMINUM FILLER METALS



8

LC10 Black #4 Thru 1/0 051404 LC10F

Female Black #4 Thru 1/0 05146 LC10M

Male Black #4 Thru 1/0 05143 LC40

Black 1/0 & 2/0 051504

LC40F Female Black 1/0 & 2/0 05156

LC40HD Black 3/0 & 4/0 051604

LC40M Male Black 1/0 & 2/0 05153

Cable Connectors 200

Copper 200 AMP 020104

300 Copper 300 AMP 020204

500 Copper 500 AMP 020304

EG200 Steel 200 AMP

EG300 Steel 300 AMP 020404

EG500 Steel 500 AMP 020504

LPG200 Copper 200 AMP 020114



Ground Clamps

ARC WELDING ACCESSORIES

M200 200 AMP (AF-2) 010024 M250

250 AMP (AF-25) 010034 M300

300 AMP (AF-3) 010044 M350

350 AMP (AF-35) 010054

M500 500 AMP (AF-50) 010064 MHT200

200 AMP (HT-2) 013024 MHT250

250 AMP (HT-25) 013034 MHT300

300 AMP (HT-30) 013044

MHT350 350 AMP (HT-35) 013054

MHT500 500 AMP (HT-50) 01306

MLT250 250 AMP 014024

MLT400 400 AMP 014014

Electrode Holders

LA1 Spring Handle, Chisel w/Brush 090704 LH1

Spring Handle, Chisel & Pick 090104

Chipping Hammers

LA1LH1



9

• Fill latex and foil balloons with ease! • All models are a piston type design. • Dependable, effi cient service.

Wrenchtight and Handtight Balloon Infl ators

BR3858BR3858G

BR3858GSH

BR3855

BR3855G

BR3855GSH

BALLOON FILLERS



10

Decorator Filler

BR3860GSHExtend-a-fl ator - Perfect for gift basket and fl oral business.

Includes gauge, string cutter and E-Z tie hook.

HyperFLO Dual Latex Infl atorFastest Infl ator Available from Weldmark

BR3809GSHThe Event/Decorators Dream!Dual Latex Filler - High fl ow regulator - Built for speed!

Incudes gauge, string cutters and E-Z tie hooks

Economy In-Line Infl ator Deluxe Foil & Latex Infl ator

AccessoriesAC211 Balloon Rubber Tilt Valve

AC410 Balloon String Cutter

AC416 Balloon E-Z Tie Hook

AC107 Gauge only for Balloon Infl ator

AC140 Adaptor, Foil Balloon

BRC3858 BR3810GSH

BALLOON FILLERS

AC214 (Not Pictured)Push Valve/Large Filling (3/4”) Attachment for Balloon Filler

0-110 O-ring for BRC3858



11

BOXED & CUT WELDING CABLE

Part# Description Std. Pkg.1x100’ Cable, Welding #1 x 100 ft Coil & Wrap Flex-A-Prene ................................................ 100’1x25’ Cable, Welding #1 x 25 ft Coil & Wrap Flex-A-Prene .................................................... 25’1x50’ Cable, Welding #1 x 50 ft Coil & Wrap Flex-A-Prene .................................................... 50’2x100’ Cable, Welding #2 x 100 ft Coil & Wrap Flex-A-Prene ................................................ 100’2x25’ Cable, Welding #2 x 25 ft Coil & Wrap Flex-A-Prene .................................................... 25’2x50’ Cable, Welding #2 x 50 ft Coil & Wrap Flex-A-Prene .................................................... 50’1/0x100’ Cable, Welding 1/0 x 100 ft Coil & Wrap Flex-A-Prene ............................................... 100’1/0x25’ Cable, Welding 1/0 x 25 ft Coil & Wrap Flex-A-Prene ................................................... 25’1/0x50’ Cable, Welding 1/0 x 50 ft Coil & Wrap Flex-A-Prene ................................................... 50’2/0x100’ Cable, Welding 2/0 x 100 ft Coil & Wrap Flex-A-Prene ............................................... 100’2/0x25’ Cable, Welding 2/0 x 25 ft Coil & Wrap Flex-A-Prene ................................................... 25’2/0x50’ Cable, Welding 2/0 x 50 ft Coil & Wrap Flex-A-Prene ................................................... 50’4x100’ Cable, Welding #4 x 100 ft Coil & Wrap Flex-A-Prene ................................................ 100’4x25’ Cable, Welding #4 x 25 ft Coil & Wrap Flex-A-Prene .................................................... 25’4x50’ Cable, Welding #4 x 50 ft Coil & Wrap Flex-A-Prene .................................................... 50’

Eliminate wasted time and “scrap”, cutting

cable off reels!



12

CLOTHING APPAREL

WM815103 Medium WM815104 Large WM815105 Extra Large

Grain Cowhide, 4” Cuff

TIG/MIG Welding Glove • Classic grain cowhide for

pliable comfort and good welding protection

• Non-obstructed seamless index

• 4” leather protective cuff • Sewn with Kevlar® thread

Cowhide TIG/MIG Model**


Light Grain Pigskin, 4” Cuff

TIG/MIG Welding Glove • Durable pigskin toughness • Pliable lasting performance • Resists stiffness from moisture • Natural wing thumb construction • 4” leather protective cuff • Sewn with Kevlar® thread

Pigskin TIG/MIG Model**


Top Grain Cowhide Elastic Cuff Driver’s Glove

• Lasting cowhide quality in a classic construction

• Multi-purpose use and versatility

• Top-of-the-line keystone thumb design

• Shirred elastic back for snug fi t

Cowhide Driver’s Model**

** These gloves have “hang tabs” and include attached Features and Benefi ts tag.

Kevlar® is a trademark of DuPont

WM811102 Small WM811103 Medium WM811104 Large WM811105 Extra Large

Grain Kidskin, 4” Cuff TIG/MIG Welding Glove

• Good fi t and feel for precision welding

• Soft kidskin for good dexterity • 4” leather protective cuff • Sewn with Kevlar® thread

Kidskin TIG/MIG Model**

WM831102 Small WM831103 Medium WM831104 Large WM831105 Extra Large

Grain Goatskin Premium

Driver’s Glove • Goatskin Softness in a

classic construction • Multi-purpose use and

versatility • Top-of-the-line keystone

thumb design • Shirred elastic back for snug fi t

Goatskin Driver’s Model**



13

WM821309 Large Grey 13” Industrial Welding

Glove • Made from split cowhide • One piece back • Fully welted at all seams • Gunn cut pattern with wing

thumb • Full cotton lining

Grey Industrial Model**

WM825209 Large Brown 13” General Duty

Welding Glove • Made from split cowhide • Comfortable full cotton lining

with foam back • Partially Kevlar® Sewn • One piece back • Fully welted at all seams • Gunn cut pattern with wing

thumb and thumb strap

13” General Duty Model**

WM845109 Large Heat Resistor Welding Glove • Made from premium side split

cowhide • Sewn with Kevlar® thread • Fully welted at all seams Double

reinforced palm and thumb

WM823309 Large Blue 13” Industrial Welding

Glove • Made from split cowhide • One piece back • Fully welted at all seams • Gunn cut pattern with wing

thumb and thumb strap • Full cotton lining

Blue Industrial Model**

WM827109 Large Brown 13” Premium Welding

Glove • Made from select split cowhide • Comfortable full cotton lining

with foam on the front and back • Sewn with Kevlar® thread • Fully welted at all seams • Gunn cut pattern and one piece

back • Wing thumb has a patch and

reinforced strap

13” Premium Model**

WM841109 Large Brown 18” General Duty

Welding Glove • Made from split cowhide • Comfortable full cotton lining

with foam back • Partially Kevlar® Sewn • One piece back • Fully welted at all seams • Gunn cut pattern with wing

thumb and thumb strap

18” General Duty Model**

*Good Grade* *Good Grade*

Heat ProtectionConstructionThe mylar fi lm sits between a full foam lining and premium side split cowhide leather shell. This protects the back of the hand from radiant heat and ultraviolet radiation.

Kevlar® is a trademark of DuPont


CLOTHING APPAREL

*Better Grade* *Best Grade*

Heat Resistor Model**



14

CLOTHING APPAREL

WM846309 Large Split Cowhide, Strap Back

Economy Work Glove • Cowhide leather • Leather knuckle strap on back • Fully lined palm for comfort • Short cuff • Shirred elastic back for snug

fi t

Economy Work Model**

WM849109 Large Durable Cowhide/Pigskin

Fitter’s Glove • Durable split cowhide back • Tough, yet pliable pigskin palm • Fully lined for comfort • Canvas cuff • Shirred elastic back for snug fi t

Fitter’s Work Model**

WM858209 Large 9 oz. Brown Jersey • 100% Cotton 9 oz. jersey • Straight thumb • Clute pattern • Knit wrist protection

Jersey Work Model

*Good Grade*

WM848109 Large Split Cowhide, Double Palm

Specialty Glove • Double leather palm with

cushion layer in between • Leather knuckle strap on back • Fully lined palm for comfort • Solid rubberized short cuff • Shirred elastic back for snug

fi t

Specialty Work Model**

WM855209 Large Split Cowhide, Strap Back

Insulated Work Glove • Durable cowhide leather • Leather knuckle strap on back • Cotton/cushion insulation for

warmth • Shirred elastic back for snug fi t

Insulated Work Model**

WM837102 Small WM837103 Medium WM837104 Large WM837105 XLarge

• Green Spandex with top grain - pigskin palm. Elastic cuff - sturdy elastic with hook and loop fastener.

Premium Drivers Glove**

*Best Grade*




15

CLOTHING APPAREL

Light Wear WM890009

Skull Cap Universal size and 100% cotton.

Printed Caps WM895209

Krazy CapUniversal size with various prints and

designs. (Reversible)



16

Brown Leather Jacket (26” and 30” Lengths) • Made from selected split

cowhide, specially tanned for heat resistance. Sewn with Kevlar® thread.

• Raglan sleeve design and satin lined shoulders allow for easy on/off and overall move-ment.

• Adjustable snap sleeves and roll up collar. • Spacious inside pocket and soapstone pockets on each upper

sleeve.

CLOTHING APPAREL

Cotton Jackets WM860102 Small WM860103 Medium WM860104 Large WM860105 X-Large WM860106 2X-Large WM860107 3X-Large WM860108 4X-Large

30” Green Cotton Jacket • Made from 9oz., 100% cotton Proban® FR7A® fl ame

retardant protection good for 50 washings. • Cool, comfortable protection from sudden fl ame exposure,

light molten splash and sparks. • Spacious inside pocket. • Heavy duty snaps down front, collar and wrists.

Leather/Cotton Combo Jackets WM868102 Small WM868103 Medium WM868104 Large WM868105 X-Large WM868106 2X-Large WM868107 3X-Large

30” Brown Leather/Green Cotton Combo Jacket • Made from 9 oz., 100% green cotton Proban® FR7A®

for body and premium side split brown leather for the sleeves.

• All sleeve seams Kevlar® sewn. • Spacious inside pocket for small item storage.

26” Leather Jackets WM881202 Small WM881203 Medium WM881204 Large WM881205 X-Large WM881206 2X-Large

30” Leather Jackets WM880202 Small WM880203 Medium WM880204 Large WM880205 X-Large WM880206 2X-Large WM880207 3X-Large

Leather Chaps WM883720 40”

40” Leather Chaps • Made from select side split


• Specially reinforced crotch confi guration for added strength and protection.

• Waist and leg straps with side release buckles for easy on/off.

*Kevlar® is a trademark of DuPont. Proban® FR7A® is a register trademark of Proban® Properties.Adjustable leg straps



17

CLOTHING APPAREL

Cotton Bibs WM862210 20”

20” Green Cotton Bib • Made from 9 oz., 100%

cotton Proban® FR7A® fl ame retardant protection good for 50 washings.

• Cool, comfortable protec-tion from sudden fl ame exposure, light molten splash and sparks.

• Designed to attach to cape sleeve to protect chest area.

Cotton Cap Sleeves WM862102 Small WM862103 Medium WM862104 Large WM862105 X-Large WM862106 2X-Large WM862107 3X-Large

Green Cotton Cape Sleeve • Made from 9 oz., 100% cot-

ton Proban® FR7A® fl ame retardant protection good for 50 washings.

• Cool, comfortable protection from sudden fl ame exposure, light molten splash and sparks.

• Designed to protect arms and upper body. Back is open to maximize ventilation.

• Heavy duty snaps down front, collar and wrists.

Leather Bibs WM882120 14” WM882220 20” WM882222 20” (2XL & 3XL)

Leather Bib • Made from selected split cow-

hide, specially tanned for heat resistance. Sewn with Kevlar® thread.

• Designed to snap on to cape sleeve to provide additional protection below chest.

• Durable side release buckle can be operated with gloves for easy on/off.

Cotton Cap Sleeves WM882202 Small WM882203 Medium WM882204 Large WM882205 X-Large WM882206 2X-Large WM882207 3X-Large

Leather Cape Sleeve • Made from selected split cowhide,

specially tanned for heat resistance. Sewn with Kevlar® thread.

• Designed to protect arms and upper body. Back is open to maximize venti-lation.

• Raglan sleeve design and satin lined shoulders allow for easy on/off and overall movement.

• Snaps on bottom for 14” or 20” leather bibs. (Sold separately)

*Kevlar® is a trademark of DuPont. Proban® FR7A® is a register trademark of Proban® Properties.



18

CLOTHING APPAREL

Cotton Aprons WM863210 24” x 36” WM863310 24” x 42”

Heavy Duty Cotton Bib Apron • Made from 9 oz., 100% cotton Proban® FR7A® fl ame

retardant protection good for 50 washings. • Cool, comfortable protection from sudden fl ame expo-

sure, light molten splash and sparks. • Heavy duty crossed straps in back for comfort. • Metal slide snap for easy on/off.

Waist Aprons WM883120 24” x 24”

Leather Waist Apron • Made from selected split cowhide, specially tanned for

heat resistance. • Heavy duty waist strap secures apron comfortably. • Durable side release buckle can be operated with gloves

for easy on/off.

Leather Bib Aprons WM883220 24” x 36” WM883320 24” x 42”

Split Leg Bib Aprons WM883420 24” x 36” WM883520 24” x 42” WM883620 24” x 48”

Leather Bib Apron • Made from selected split cowhide, specially tanned for

heat resistance. Sewn with Kevlar® thread. • Crossed back strap support for comfort with side release

buckle for easy on/off. • Two chest pockets to store small items.

Leather Split Leg Bib Apron • Made from selected split cowhide, specially tanned for

heat resistance. Sewn with Kevlar® thread. • Crossed back strap support for comfort with side release

buckles in back and down legs for easy on/off. • Specially reinforced crotch confi guration for added

strength and protection. • Two chest pockets to store small items.

*Kevlar® is a trademark of DuPont. Proban® FR7A® is a register trade-mark of Proban® Properties.



19

CLOTHING APPAREL

Pouch WM890020

7-1/2” Leather Pouch • Made from selected split cow-


• Ideal for carrying safety glasses, tape measure or small tools.

• Velcro® closure and convenient belt loop.

Electrode Holder WM890220

Leather Electrode Holder • Made from selected split cow-


• Rivet reinforcements. • Reinforced bottom. • Swivel clip for easy attachment.

Hand Pad WM894019

Aluminized Hand Pad • Front side has aluminized

coating for more refl ected heat protection.

• Back side has glove hand straps for easier control.

Cable Covers WM893110 1-3/4x10’ WM893122 1-3/4x22’

Leather Cable Covers • Durable cowhide leather for

general protection of cables. • Easy to wrap around cable and

secure with snaps. • Sewn with Kevlar® thread.

Helmet Bib WM890320

Leather Helmet Bib • Made from selected split cow-

hide, specially tanned for heat resistance.

• Designed to protect neck area below the helmet from sparks and spatter.

• Attaches to helmet with sturdy metal clips. (included)

Cotton Sleeves WM865010

18” Green Cotton Sleeves • Made from 9 oz., 100% cotton

Proban® FR7A® fl ame retardant protection good for 50 washings.

• Designed to protect from above elbow to wrist.

• Elastic at both ends.

Leather Sleeves WM885020

23” Leather Sleeves • Made from selected split


• Designed to protect arms from above elbow to wrist.

• Leather adjustment straps and snap wrists allow for multiple sizing.

Sweat Band WM892019

Leather Sweatband • Durable top grain cowhide

leather for added protection. • Foam back for cushing of head. • Snaps for easy on/off of head-

gear.

*Kevlar® is a trademark of DuPont. Proban® FR7A® is a register trademark of Proban® Properties. Velcro® is a registered trademark of Velcor® Industries.



20

CUTTING TIPS

WEM (size)-1-101 Victor Style (size)-1-101

Acetylene

WEM 138-(size) Airco Style 138-(size)

Acetylene


Acetylene

WEM 1502-(size) Oxweld Style 1502-(size)

Acetylene


Acetylene

Part# Description Std. Pkg.WEM 0-1-101 Cutting Tip, Victor Style ......................... 10WEM 00-1-101 Cutting Tip, Victor Style ......................... 10WEM 000-1-101 Cutting Tip, Victor Style ......................... 10WEM 1-1-101 Cutting Tip, Victor Style ......................... 10WEM 2-1-101 Cutting Tip, Victor Style ......................... 10WEM 3-1-101 Cutting Tip, Victor Style ......................... 10WEM 4-1-101 Cutting Tip, Victor Style ......................... 10WEM 5-1-101 Cutting Tip, Victor Style ......................... 10WEM 6-1-101 Cutting Tip, Victor Style ......................... 10

Part# Description Std. Pkg.WEM 138-0 Cutting Tip, Airco Style .......................... 10WEM 138-00 Cutting Tip, Airco Style .......................... 10WEM 138-1 Cutting Tip, Airco Style .......................... 10WEM 138-2 Cutting Tip, Airco Style .......................... 10WEM 138-3 Cutting Tip, Airco Style .......................... 10

Part# Description Std. Pkg.WEM 144-0 Cutting Tip, Airco Style .......................... 10WEM 144-00 Cutting Tip, Airco Style .......................... 10WEM 144-1 Cutting Tip, Airco Style .......................... 10WEM 144-2 Cutting Tip, Airco Style .......................... 10WEM 144-3 Cutting Tip, Airco Style .......................... 10WEM 144-4 Cutting Tip, Airco Style .......................... 10

Part# Description Std. Pkg.WEM 1502-3 Cutting Tip, Oxweld Style ...................... 10WEM 1502-4 Cutting Tip, Oxweld Style ...................... 10WEM 1502-6 Cutting Tip, Oxweld Style ...................... 10

Part# Description Std. Pkg.WEM 164-0 Cutting Tip, Airco Style .......................... 10WEM 164-00 Cutting Tip, Airco Style .......................... 10WEM 164-1 Cutting Tip, Airco Style .......................... 10WEM 164-2 Cutting Tip, Airco Style .......................... 10WEM 164-3 Cutting Tip, Airco Style .......................... 10WEM 164-4 Cutting Tip, Airco Style .......................... 10WEM 164-5 Cutting Tip, Airco Style .......................... 10WEM 164-6 Cutting Tip, Airco Style .......................... 10



21

CUTTING TIPS

WEM 2V-FS-(size) Victor Style GPM-(size)

MAPP


Acetylene

WEM (size)-3-GPN Victor Style (size)-3-GPN

Propane or Natural Gas

WEM (size)-3-GPP Victor Style (size)-3-GPP

Propylene

WEM3V-FS-(size) Victor Style 3GPM-(size)

MAPP

Part# Description Std. Pkg.WEM 2V-FS-38 Cutting Tip, Victor Style (5-GPM)....................10WEM 2V-FS-44 Cutting Tip, Victor Style (4-GPM)....................10WEM 2V-FS-49 Cutting Tip, Victor Style (3-GPM)....................10WEM 2V-FS-54 Cutting Tip, Victor Style (2-GPM)....................10WEM 2V-FS-56 Cutting Tip, Victor Style (1-GPM)....................10WEM 2V-FS-60 Cutting Tip, Victor Style (0-GPM)....................10WEM 2V-FS-68 Cutting Tip, Victor Style (00-GPM)..................10WEM 2V-FS-72 Cutting Tip, Victor Style (000-GPM)................10

Part# Description Std. Pkg.WEM 0-3-101 Cutting Tip, Victor Style ......................... 10WEM 00-3-101 Cutting Tip, Victor Style ......................... 10WEM 000-3-101 Cutting Tip, Victor Style ......................... 10WEM 1-3-101 Cutting Tip, Victor Style ......................... 10WEM 2-3-101 Cutting Tip, Victor Style ......................... 10WEM 3-3-101 Cutting Tip, Victor Style ......................... 10WEM 4-3-101 Cutting Tip, Victor Style ......................... 10

Part# Description Std. Pkg.WEM 0-3-GPN Cutting Tip, Victor Style ......................... 10WEM 00-3-GPN Cutting Tip, Victor Style ......................... 10WEM 1-3-GPN Cutting Tip, Victor Style ......................... 10WEM 2-3-GPN Cutting Tip, Victor Style ......................... 10WEM 3-3-GPN Cutting Tip, Victor Style ......................... 10WEM 4-3-GPN Cutting Tip, Victor Style ......................... 10

Part# Description Std. Pkg.WEM 0-3-GPP Cutting Tip, Victor Style ......................... 10WEM 00-3-GPP Cutting Tip, Victor Style ......................... 10WEM 000-3-GPP Cutting Tip, Victor Style ......................... 10WEM 1-3-GPP Cutting Tip, Victor Style ......................... 10WEM 2-3-GPP Cutting Tip, Victor Style ......................... 10WEM 3-3-GPP Cutting Tip, Victor Style ......................... 10WEM 4-3-GPP Cutting Tip, Victor Style ......................... 10WEM 5-3-GPP Cutting Tip, Victor Style ......................... 10

Part# Description Std. Pkg.WEM 3V-FS-38 Cutting Tip, Victor Style (5-3-GPM) ...............10WEM 3V-FS-44 Cutting Tip, Victor Style (4-3-GPM) ...............10WEM 3V-FS-49 Cutting Tip, Victor Style (3-3-GPM) ................10WEM 3V-FS-54 Cutting Tip, Victor Style (2-3-GPM) ................10WEM 3V-FS-56 Cutting Tip, Victor Style (1-3-GPM) ................10WEM 3V-FS-60 Cutting Tip, Victor Style (0-3-GPM) ................10WEM 3V-FS-68 Cutting Tip, Victor Style (00-3-GPM) ..............10WEM 3V-FS-72 Cutting Tip, Victor Style (000-3-GPM) ............10



22

CUTTING TIPS

WEM 4202-(size) Purox Style 4202-(size)

Acetylene

Part# Description Std. Pkg.WEM 4202-3 Cutting Tip, Purox Style ......................... 10WEM 4202-4 Cutting Tip, Purox Style ......................... 10WEM 4202-5 Cutting Tip, Purox Style ......................... 10WEM 4202-7 Cutting Tip, Purox Style ......................... 10WEM 4202-9 Cutting Tip, Purox Style ......................... 10

Part# Description Std. Pkg.WEM 4213-14-3 Cutting Tip, Purox Style ......................... 10WEM 4213-14-4 Cutting Tip, Purox Style ......................... 10WEM 4213-14-5 Cutting Tip, Purox Style ......................... 10


WEM 4213-14-(size) Purox Style 4213-14-(size)

Part# Description Std. Pkg.WEM 6290-0 Cutting Tip, Harris Style ......................... 10WEM 6290-00 Cutting Tip, Harris Style ......................... 10WEM 6290-1 Cutting Tip, Harris Style ......................... 10WEM 6290-2 Cutting Tip, Harris Style ......................... 10WEM 6290-3 Cutting Tip, Harris Style ......................... 10WEM 6290-4 Cutting Tip, Harris Style ......................... 10WEM 6290-5 Cutting Tip, Harris Style ......................... 10

Acetylene

WEM 6290-(size) Harris Style 6290-(size)

Part# Description Std. Pkg.WEM 6290NX-0 Cutting Tip, Harris Style ......................... 10WEM 6290NX-00 Cutting Tip, Harris Style ......................... 10WEM 6290NX-1 Cutting Tip, Harris Style ......................... 10WEM 6290NX-2 Cutting Tip, Harris Style ......................... 10WEM 6290NX-3 Cutting Tip, Harris Style ......................... 10WEM 6290NX-4 Cutting Tip, Harris Style ......................... 10WEM 6290NX-5 Cutting Tip, Harris Style ......................... 10WEM 6290NX-6 Cutting Tip, Harris Style ......................... 10Propane or Natural Gas

WEM 6290NX-(size) Harris Style 6290NX-(size)

Part# Description Std. Pkg.WEM 6290VVCU-0 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-0.5 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-00 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-000 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-1 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-1.5 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-2 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-2.5 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-3 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-4 Cutting Tip, Harris Style ................... 10WEM 6290VVCU-4/0 Cutting Tip, Harris Style ................... 10


WEM 6290VVCU-(size) Harris Style 6290VVCU-(size)



23

CUTTING TIPS


WEM (size)-GPN Victor Style (size)-GPNPart# Description Std. Pkg.WEM 0-GPN Cutting Tip, Victor Style ......................... 10WEM 00-GPN Cutting Tip, Victor Style ......................... 10WEM 000-GPN Cutting Tip, Victor Style ......................... 10WEM 1-GPN Cutting Tip, Victor Style ......................... 10WEM 2-GPN Cutting Tip, Victor Style ......................... 10WEM 3-GPN Cutting Tip, Victor Style ......................... 10WEM 4-GPN Cutting Tip, Victor Style ......................... 10WEM 5-GPN Cutting Tip, Victor Style ......................... 10WEM 6-GPN Cutting Tip, Victor Style ......................... 10

Propylene

WEM (size)-GPP Victor Style (size)-GPPPart# Description Std. Pkg.WEM 0-GPP Cutting Tip, Victor Style ......................... 10WEM 00-GPP Cutting Tip, Victor Style ......................... 10WEM 000-GPP Cutting Tip, Victor Style ......................... 10WEM 1-GPP Cutting Tip, Victor Style ......................... 10WEM 2-GPP Cutting Tip, Victor Style ......................... 10WEM 3-GPP Cutting Tip, Victor Style ......................... 10WEM 4-GPP Cutting Tip, Victor Style ......................... 10WEM 5-GPP Cutting Tip, Victor Style ......................... 10WEM 6-GPP Cutting Tip, Victor Style ......................... 10WEM 7-GPP Cutting Tip, Victor Style ......................... 10WEM 8-GPP Cutting Tip, Victor Style ......................... 10

Acetylene

WEM MC12-(size) Smith Style MC12-(size)Part# Description Std. Pkg.WEM MC12-0 Cutting Tip, Smith Style ......................... 10WEM MC12-00 Cutting Tip, Smith Style ......................... 10WEM MC12-1 Cutting Tip, Smith Style ......................... 10WEM MC12-2 Cutting Tip, Smith Style ......................... 10WEM MC12-3 Cutting Tip, Smith Style ......................... 10WEM MC12-4 Cutting Tip, Smith Style ......................... 10

Acetylene

WEM SC12-(size) Smith Style SC12-(size)Part# Description Std. Pkg.WEM SC12-0 Cutting Tip, Smith Style ......................... 10WEM SC12-00 Cutting Tip, Smith Style ......................... 10WEM SC12-1 Cutting Tip, Smith Style ......................... 10WEM SC12-2 Cutting Tip, Smith Style ......................... 10WEM SC12-3 Cutting Tip, Smith Style ......................... 10WEM SC12-4 Cutting Tip, Smith Style ......................... 10WEM SC12-5 Cutting Tip, Smith Style ......................... 10


WEM SC50-(size) Smith Style SC50-(size)Part# Description Std. Pkg.WEM SC50-1 Cutting Tip, Smith Style ......................... 10WEM SC50-2 Cutting Tip, Smith Style ......................... 10WEM SC50-3 Cutting Tip, Smith Style ......................... 10WEM SC50-4 Cutting Tip, Smith Style ......................... 10WEM SC50-5 Cutting Tip, Smith Style ......................... 10



24

MIG MACHINE EXTENSION CORD

Part# Description Std. Pkg.WM202583 Extension Cord 8/3 25 ft 40 amps/250 VAC/10,000 watts w/Molded Ends ................1WM205083 Extension Cord 8/3 50 ft. 40 amps/250 VAC/10,000 watts w/Molded Ends ................1

CUTTING TIPS


WEM 138-(size) Airco Style 138-(size) WEM3V-FS-(size) Victor Style 3GPM-(size)WEM SC50-(size) Smith Style SC50-(size)

WEM MC12-(size) Smith Style MC12-(size)

WEM 6290VVCU-(size) Harris Style 6290VVCU-(size)

WEM SC12-(size) Smith Style SC12-(size)

WEM 6290-(size) Harris Style 6290-(size)WEM 164-(size) Airco Style 164-(size)

WEM 4202-(size) Purox Style 4202-(size)

WEM 4213-14-(size) Purox Style 4213-14-(size)

WEM 6290NX-(size) Harris Style 6290NX-(size)

WEM (size)-GPP Victor Style (size)-GPP


WEM 2V-FS-(size) Victor Style GPM-(size)

WEM (size)-GPN Victor Style (size)-GPN

WEM (size)-3-GPP Victor Style (size)-3-GPP

WEM (size)-3-GPN Victor Style (size)-3-GPN


WEM 1502-(size) Oxweld Style 1502-(size)

Acetylene

Acetylene

Acetylene

Acetylene







Acetylene

Acetylene

Acetylene

Acetylene

Acetylene

Acetylene

MAPP

Propylene

Propylene

MAPP

Cutting TipCutting TipSelection GuideSelection Guide

Part# Description TIPCHART 11 x 17 Laminated Cutting Tip Selection Guide

CYLINDER WRENCHES

Part# Description Std. Pkg.WEM 0005B Wrench, Cylinder Box B & MC Bulk 144 Per Box ......................144WEM 0005C Wrench, Cylinder Box B & MC Carded ............................................1WEM 0010B Wrench, Cylinder L Handle Commercial Bulk 48 Per Box ............48WEM 0010C Wrench, Cylinder L Handle Commercial Carded ..............................1WEM 0020B Wrench, Cylinder T Handle 3/8 Bulk 48 Per Box ...........................48WEM 0020C Wrench, Cylinder T Handle 3/8 Carded ............................................1WEM 0250B Wrench, Cylinder T Handle 1/4” B & MC Bulk 48 Per Box ..........48WEM 0250C Wrench, Cylinder T Handle 1/4” B & MC Carded ...........................1WEM 1013B Wrench, Cylinder 10 Way Bulk 48 Per Box ....................................48WEM 1013C Wrench, Cylinder 10 Way Carded .....................................................1



25

Part # Description Std PkgWM888025 First Aid Kit, 25 Bulk “Plastic” Case ..................................................................................1WM888050 First Aid Kit, 50 Bulk “Plastic” Case ..................................................................................1WM888210 First Aid Kit, 10 Unitized “Steel” Case ...............................................................................1WM888216 First Aid Kit, 16 Unitized “Steel” Case ...............................................................................1WM888220 First Aid Kit, Auto/Truck “Steel” Case ...............................................................................1WM888224 Fist Aid Kit, 24 Unitized “Steel” Case ................................................................................1WM888225 First Aid Kit, 25 Bulk “Steel” Case .....................................................................................1WM888250 First Aid Kit, 50 Bulk “Steel” Case .....................................................................................124-65015 Eye Drops, Industrial 1/2 ounce ..........................................................................................1

FIRST AID KITS

FLASHBACK ARRESTORS

Part # Description Std PkgWEM FBK100 Flashback Arrestor WE FA-30 .......................... EAWEM FBK200 Flashback Arrestor WE FA-10 .......................... EA



26

GAS APPARATUS

by:

Part No. Description Std PkgWEM WM-510T Weldmark by Smith Medium Duty DeluxeToolbox Outfi t (540/510) .................... 2WEM WM-300T Weldmark by Smith Medium Duty DeluxeToolbox Outfi t (540/300) ................... 2WEM WH-510T Weldmark by Smith Heavy Duty Deluxe Toolbox Outfi t (540/510) ..................... 2WEM WH-300T Weldmark by Smith Heavy Duty Deluxe Toolbox Outfi t (540/300) ..................... 2WEM WM15938 Weldmark by Smith Medium Duty Dual Guard Torch Combo Kit ....................... 1WEM WH15939 Weldmark by Smith Heavy Duty Dual Guard Torch Combo Kit ........................... 1

WM-510T WM-300T

WH-510TWH-300T

Torch Combo KitWM15938WH15939

*All outfi ts come with Grade “T” hose!**Lifetime Torch Warranty!*



27

GAS APPARATUS

Weldmark Cutmaster Contents:• Oxygen & Acetylene Regulators• Torch Handle with “built-in” fl ash arrester• Cutting Attachment• Welding Nozzle and Cutting Tip• Hose, Goggles and Lighter (Deluxe Models)• Bi-Lingual Instructions

0384-1387Portable Torch Tote Kit(Cylinders not included)

• Quality brass and stainless steel construction. • Welds to 1/4” (up to 3/4” with optional tips). • Cuts to 1/2” (up to 6” with optional tips). • Patented built-in reverse fl ow check valves for

added safety.• Built-in fl ash arrestor on torch handle.

Deluxe ModelsInclude hose, goggles and lighter.

Part# Description0384-0654 Cutmaster Outfi t, 150-510 Deluxe, Light Duty0384-0661 Cutmaster Outfi t, 150-510 Standard, Light Duty0384-0672 Cutmaster Outfi t, 250-510 Deluxe, Medium Duty0384-0673 Cutmaster Outfi t, 250-510 Standard, Medium Duty0384-0674 Cutmaster Outfi t, 250-510WQ Deluxe, Medium Duty0384-0681 Cutmaster Outfi t, 250-300 Deluxe, Medium Duty0384-0688 Cutmaster Outfi t, 350-510 Deluxe, Heavy Duty 0384-1358 Cutmaster Outfi t, 350-510WQ Deluxe, Heavy Duty0384-1387 Cutmaster “Tote” Portable Outfi t (No Cylinders) (Replacement plastic “tote” case only - #1421-0042)

“Weldmark by Victor”



28

GAS APPARATUS

150 Series - “Light Duty”

250 Series - “Medium Duty”

350 Series - “Heavy Duty”

Regulator

0781-9281500 PSIG “Purging” Regulator

Part# DescriptionRegulators0781-2580 Regulator, Oxygen 150CR-540, Light Duty Rear Inlet (packaged in box)0781-2581 Regulator, Acetylene 160AR-200, Light Duty Rear Inlet (packaged in box)0781-8988 Regulator, Oxygen 150-60-540, Light Duty (packaged in box)0781-8989 Regulator, Acetylene 150-15-510, Light Duty (packaged in box)0781-9162 Regulator, Oxygen 250-80-540, Medium Duty (packaged in box)0781-9163 Regulator, Acetylene 250-15-510, Medium Duty (packaged in box)0781-9165 Regulator, Acetylene 250-15-510WQ, Medium Duty (packaged in box)0781-9166 Regulator, LP Gas 250-40-510LP, Medium Duty (packaged in box)0781-9167 Regulator, Inert Gas 250-80-580, Medium Duty (packaged in box)0781-9179 Regulator, Acetylene 250-15-300, Medium Duty (packaged in box)0781-9194 Regulator, Oxygen 350-125-540, Heavy Duty (packaged in box)0781-9195 Regulator, Acetylene 350-15-510, Heavy Duty (packaged in box)0781-9197 Regulator, Acetylene 350-15-510WQ, Heavy Duty (packaged in box)Flowmeters/Flowgauges0781-9210 Regulator, Flow Gauge AF150-580 (No Hose) (packaged in box)0781-9211 Regulator, Flow Gauge AF150-580 with 10ft. hose (P.O.P)0781-9212 Regulator, Flow Meter HRF1425-580 (packaged in box)0781-9213 Regulator, Flow Meter HRF1425-580 with 10ft. hose (P.O.P)0781-9214 Regulator, Flow Gauge CF153-320 (packaged in box)0781-9215 Regulator, Flow Gauge CF153-320 with 10ft. hose (P.O.P)0781-9216 Regulator, Flow Meter HRF1480-580 (packaged in box)0781-9218 Regulator, Flow Meter HRF1480-320 with 10ft. hose (P.O.P)0781-9281 Regulator, Nitrogen Purging TPR250-580 (packaged in box)

“Weldmark by Victor”



29

REPLACEMENT GAUGES

Weldmark Pressure Gauges are made in the USA and comply with all U.L. and ISO 9001 requirements. Our state-of-the-art technology and highly automated production equipment ensure the fi nest quality at the most competitive prices.

Made in theU.S.A.

Weldmark Pressure Gauges· Available in attractive P.O.P. display packaging or bulk packed.· Made in the USA.· UL listed and ISO 9001 certifi ed.· Polycarbonate lenses are replaceable on all 2” and 2 ½” gauges.

(Replacement part numbers WM320001- 2” cover and WM325001 2 ½” cover.)

· Cleaned to ASME B40.100-1998 cleanliness level IV for oxygen service.

· Labeled with description and bar coding.

Specifi cations 1 ½ “ 2 & 2 ½ “ Cryogenic Balloon FillerCase Painted Steel Polished Solid Brass Polished Solid Brass Painted SteelConnection 1/8” NPT 1/4” NPT 1/4” NPT 1/8” NPTMounting Bottom Bottom Center Back Center Back



30

REPLACEMENT GAUGES

Description 1 ½ “ 2” 2 ½ “ 30 psi red zone WM315030 WM320030 WM325030 60 psi - WM320060 WM325060 100 psi WM315100 WM320100 WM325100 200 psi WM315200 WM320200 WM325200 400 psi WM315400 WM320400 WM325400 600 psi - WM320600 WM325600 4,000 psi WM315000 WM324000 WM325000 Contents Acetylene WM315019 - - (1/4-1/2-3/4-Full) 50 CFH/25LPM Flow Gauge - WM320050 -Bulk Packs (50/case)Description 2” 2 ½ “ 30 psi red zone WM330205 WM330255 60 psi WM360205 WM360255 100 psi WM310205 WM310255 200 psi WM320205 WM320255 400 psi WM340205 WM340255 600 psi WM360025 WM360055 4,000 psi WM340025 WM340005

Description Cryogenic 2”x 100 psi WM352100 2”x 400 psi WM352400 2”x 600 psi WM352600 Description Balloon Gauge 1 ½” 4000 psi WM318400

* Specialty gauges are packed in individual cardboard boxes.

Specialty Gauges

WARNING!Misuse of product may cause explosion and personal injury. Read ASME B40.1 and apparatus installation/operating instructions before using. The installation of this gauge must be performed by a trained and qualifi ed service person.

Cryogenic Gauge

Balloon Regulator Replacement Gauge



31

HEADGEAR, VISORS AND KNEE PADS

Headgear WM800000

Headgear HG4S with heavy-duty Ratchet Headband 3” Sparkguard

Protection Gear WM810100

Knee Pads Knee Pads, #1010 (pair)

WM838157 WM809137

WM858157WM800007

WM808150 Visor with WM800000 Headgear

Part# Description Std. Pkg.WM800000 Headgear HG4S Ratchet Headband 3” Sparkguard........................................................25WM800007* Headgear HG4S/Clear Visor 8x15-1/2 P.O.P. Combo.........................................................16WM801000 Visor Clear 10x20x.060 (IM20P6F) .....................50WM801001 Replacement Buttons/Strap #1001 (Set) .................1WM801003 Foam Inner Cushions #1003 ...................................1WM801004 Hinge Locking Springs #1004 ................................1WM801020 Visor Clear 10x20x.060 (IM21P6F) .....................50WM801027* Visor Clear 10x20x.060 P.O.P. ..............................50WM808150 Visor Clear 8x15-1/2x.060 (IM9P6F) ...................50WM808157* Visor Clear 8x15-1/2x.060 P.O.P...........................50WM809130 Visor Clear 9x13x.060 (IM1P6F) .........................50

Part# Description Std. Pkg.WM809137* Visor Clear 9x13x.060 P.O.P. ............................... 50WM810100 Knee Pads #1010 (Pair) ........................................ 15WM818150 Visor Smoke 8x15-1/2x.060 (IM9P6FS) ............. 50WM828150 Visor Medium Green 8x15-1/2x.060 (IM9P6FM) 50WM831000 Visor Dark Green 10x20x.060 (IM20P6FD) ....... 50WM831020 Visor Dark Green 10x20x.060 (IM21P6FD) ....... 50WM831027* Visor Dark Green 10x20x.060 P.O.P. .................. 50WM838150 Visor Dark Green 8x15-1/2x.060 (IM9P6FD) ..... 50WM838157* Visor Dark Green 8x15-1/2x.060 P.O.P. .............. 50WM839130 Visor Dark Green 9x13x.060 (IM1P6FD) ........... 50WM839137* Visor Dark Green 9x13x.060 P.O.P. ..................... 50WM858150 Visor Shade #5 8x15-1/2x.060 (IM9P6F5) .......... 50WM858157* Visor Shade #5 8x15-1/2x.060 P.O.P. .................. 50



32

HEADGEAR, VISORS AND KNEE PADS

Headgear & Visor Cross Reference Chart

The high-quality ratchet headgear and visors are also attractively packaged to hang prominently in your showrooms. All visors are .060 compared to the popular Jackson type at .040 and your cost is much less!

Part # Description Jackson/Fibre MetalWM 800000 Headgear HG4S ratchet type 0742-0020 (170SB) F-300, F-400WM 800007* Headgear HG4S ratchet type w/clear

8x15-1/2 .060 visorWM 808150 Visor clear 8x15-1/2 .060 0754-0029 9x15-1/2 .040

(34-40) Acetate0754-0030 9x15-1/2 .060 0754-0215 9x15-1/2 .060(34-60) Acetate 915-60 Polycarbonate

WM 808157* Visor clear 8x15-1/2 .060WM 818150 Visor “smoked” 8x15-1/2 .060WM 828150 Visor medium green 8x15-1/2 .060WM 838150 Visor dark green 8x15-1/2 .060 0754-0040 9x15-1/2 .040

(34-42) Acetate0754-0218 9x15-1/2 .060 (915-63) Polycarbonate

WM 838157* Visor dark green 8x15-1/2 .060WM 858150 Visor shade #5 8x15-1/2 .060 0754-0031 8x15-1/2 .060

(34-65) PolycarbonateWM 858157* Visor shade #5 8x15-1/2 .060WM 809130 Visor clear 9x13 .060 0754-0018 8x12 .040 (8040)

Acetate0754-0020 8x12 .060 0754-0205 8x12 .060(8060) Acetate (812-60) Polycarbonate

WM 809137* Visor clear 9x13 .060WM 839130 Visor dark green 9x13 .060 0754-0038 8x12 .040 (8042)

Acetate0754-0208 8x12 .060 (812-63) Polycarbonate

WM 839137* Visor dark green 9x13 .060WM 801000 Visor clear 10x20 .060 (notched) 0754-0132 9x19-1/2 .040

(1940-U) AcetateWM 831000 Visor dark green 10x20 .060 (notched)WM 801020 Visor clear 10x20 .060 4199 CLR 9-3/4x19 .060WM 801027* Visor clear 10x20 .060WM 831020 Visor dark green 10x20 .060 4199 DRK 9-3/4x19 .060WM 831027* Visor dark green 10x20 .060

-Visors interchange with many popular competitive headgears! * “Point of Purchase (P.O.P.) packaged with header card showing features and benefi ts. (Prices shown above are as of February 2006.)



33

HOSE KITS

(WM 26)

These kits are perfect for quick hose repairs. Sturdy polyethylene case contains popular A-Size or B-Size fi ttings with hand crimping tool and

chart that identifi es and describes fi ttings in each compartment.

Models and Sizes WM24

Hose Repair Kit, “B” size 3/16” / 1/4” ID KT28 Tool (Western CK24)

WM26 Hose Repair Kit, “B” size 1/4” ID KT28 Tool (Western CK26)

WM27 Hose Repair Kit, “A & B” size 3/16” / 1/4” ID KT28 Tool (Western CK5/7)



34

INDUSTRIAL CHEMICALS

WM397 (Bulk)

With Weldmark

you have 5

choices!!!

WM200-16 16 oz. WM200-24 24 oz.

Solvent Type/Lethicin-Based WM200 is a solvent/lethicin-based antispatter formulated

for use on steel, steel alloys, stainless steel, aluminum, aluminum alloys and titanium. WM200 is designed for oil-based paint compatibility. WM200 is solvent removable and is non-fl ammable. Adequate ventilation is required for product use.

WM390 16 oz. Non-Chlorinated Lethicin/Water-based WM390 is a non-chlorinated lethicin/water-based

antispatter formulated for use on steel, steel alloys, stainless steel, aluminum, aluminum alloys and titanium. WM390 sprays wet and is designed to weld-through while wet while producing no toxic fumes. WM390 is compatible with oil-based paints. WM390 is solvent removable and is non-fl ammable. No special ventilation is required with WM390. Biodegradable.

WM395-16 16 oz. Water/Mineral-Oil-Base

WM395 Antispatter is a water/mineral-oil-based formulation that is formulated for use on steel, steel alloys, stainless steel and titanium. WM395 can be removed by water, solvent or sandblasting. This product is oil-based paint compatible and water-based paint compatible when the surface has been thoroughly cleaned. This water-based formulation does not require special ventilation and is non-fl ammable.

WM397 1 Gal. Weld Shield Y06/WW (Water Washable) WM397 Antispatter is a heavy-duty water/resin-based

formulation for use on steel, steel alloys and stainless steel. WM397 is water-based paint compatible requiring no special ventilation. WM397 is sand/bead blast removable. Non-fl ammable and biodegradable.

WM400-16 16 oz. WM400-64 1 gal.

Enviro Spat (Water/Surfactant) WM400 Antispatter is a water/surfactant antispatter

formulated for use on steel, steel alloys, stainless steel, aluminum, aluminum alloys and titanium. WM400 is water-based paint compatible and oil-based compatible. This environmentally safe antispatter is water removable requiring no special ventilation. WM400 is biodegradable and non-fl ammable.



35


Coatings Nozzle Dip

Aluminum Cleaner

WM306 16 oz. Spray Galv/Cold Galv Produces hard zinc coating that will stop

rust and corrosion on all metal surfaces.

Compounded from 95.1% metallic zinc dust. Equal to hot dip galvanizing in cathodic protection and fi lm durability. Non-fl ammable.

WM310 12 oz. Aluminum Spray Aluminum Spray will protect metal

surfaces both indoors and out from chemical vapor corrosion and extended weathering. Dries to the touch in minutes. No priming necessary. Leaves a bright aluminum fi nish. Flammable.

WM305 16 oz. Brite Galv Coating Brite Galv produces a hard coating that

will stop rust on all metal surfaces. Contains metallic zinc dust, resin and other additives to provide the look of new galvanizing. Equivalent to hot dip galvanizing in cathodic protection, fi lm durability and protection against caustic action salt spray. BRITE GALV resists peeling, blistering, rust, weather, gasoline and oil. Produces bright fi nish. Non-fl ammable.

WM731 16 oz. Nozzle Dip WM731 Nozzle Dip is a petrolatum-based (“fi rm”

petroleum gel type) providing excellent protection against weld spatter build-up on MIG gun nozzles, tips, positioners, stud welding chucks and electrode holders on all semi and automatic welding apparatus. Non-fl ammable.

WM781 32 oz. Aluminum Cleaner A ready to use cleaner and brightener providing rapid

and effortless cleaning and removal of aluminum oxides, grease and dirt from aluminum before welding. Rinse agents provide a “sheeting” action for fi lm-free rinsing. Biodegradable.



36


Gas Leak Detector Tungsten Sharpener

CoolantWire Treatments WM500-10 6/bag

Treated Pad

WM501-10 6/bag Untreated Pad

WM502 4 oz. Ultra Lube

Designed for use on all M.I.G. wire feeders to remove dust and dirt from the wire prior to wire entry into the liner conduit. Use of wire feed pads can decrease the coeffi cient of friction in the liner as much as 50% to 60% and will reduce erratic feed and burn backs. Treated pads are to be used on steel, stainless steel, hard facing, silicone bronze, solid and fl ux core wire. Untreated pads for use on aluminum wire. Treated pads may be re-treated with wire feed pad & pneumatic tool lubricant. Each pad comes with a clip. Treated and untreated pads are packaged 6 pads per bag - 10 bags per case.

WM600 5 oz. Chem-Sharp WM600 provides the safest and most effi cient cost

effective means of sharpening tungsten. No grinding is needed. Over 500 sharpenings

per jar. This chemical re-pointing extends tungsten life four times that of ground

tungsten.

WM929 1 gal Defense Defense anti-freeze and pump coolant lubricant provides

year round pump protection for water coolers and closed loop water systems. Protects from freezing to -30OF when not diluted.

WM800 4 oz. Gas Leak Detector Provides an easy and effi cient method of leak

detection. Safe for all gases and oxygen and is non-fl ammable and non-

corrosive. Forms a readily visible and stable foam that insures reliable

detection. Functional at any temperature above 15°F.



37


Display is Free with a $500 (net) Weldmark Industrial Chemical order.

Your choice of mix!



38

Part # Description Std Pk.WEM 8AD54VS 5-1/4” x 4-1/2” Variable Shade Auto Darkening Lens ................................................................................5WEM 8AD24FS 2” x 4.25” Fixed Shade Auto Darkening Lens ..........................................................................................10WEM 8ADCP 5-1/4” X 4-1/2” Rear Cover Plate ...............................................................................................................5WEM 8HM150 Halfmag Inside Cover Lens For WEM 8AD54VS Only 1.50 Diopter .......................................................1WEM 8HM200 Halfmag Inside Cover Lens For WEM 8AD54VS Only 2.00 Diopter .......................................................1WEM 8HM250 Halfmag Inside Cover Lens For WEM 8AD54VS Only 2.50 Diopter .......................................................1

WEM 8AD24FS

Dark Shade 10.5 Light Shade 4 Patent pending “NO BLOCK” in the window sensors Fits most popular helmets Always ready - no on/off Rugged & Reliable 1 year warranty Power - Solar with internal battery backup ANSI Z87.1 and EN (CE)

WEM 8AD45VS

9-12 Variable Shade Sensitivity Adjustment Delay Adjustment Light State 3.75 TIG Welding down to 10 amps 3-YEAR WARRANTY Power – Solar plus replaceable battery backup ANSI Z87.1 and EN (CE)

Will fit the following helmets:Sellstrom (all Titan models 4X5), Fibre Metal – Tigerhood model 190, ArcOne – Vision V –0500, Jackson – Shadow HSL – 100, Huntsman – 951 P

LENSES - AUTO DARKENING



39

REPLACEMENT LENSES

Gold Polycarbonate Filter LensGold fi lter lens allow the welder to see his work in true, more natural colors. Lens are approximately 1/3 the weight of glass lens. The gold coating refl ects the same harmful rays but stays cooler than the glass lens. Manufactured to Federal Specifi cation GGG-H-211D and ANSI STD.Z87.1

2 x 4¼Part# Description

812408 Gold Lens Filter Shade 8 812409 Gold Lens Filter Shade 9 812410 Gold Lens Filter Shade 10 812411 Gold Lens Filter Shade 11 812412 Gold Lens Filter Shade 12

4½ x 5¼Part# Description

814508 Gold Lens Filter Shade 8 814509 Gold Lens Filter Shade 9 814510 Gold Lens Filter Shade 10 814511 Gold Lens Filter Shade 11 814512 Gold Lens Filter Shade 12

Heat Treated Filter Plate Lens 2 x 4¼

2” x 4-1/4” Heat treated fi lter plates are manufactured to Federal Specifi cation GGG-H-211D and ANSI STD. Z87.1Part# Description

802403 Lens Filter Shade 3 802404 Lens Filter Shade 4 802405 Lens Filter Shade 5 802406 Lens Filter Shade 6 802407 Lens Filter Shade 7 802408 Lens Filter Shade 8

Part# Description 802409 Lens Filter Shade 9 802410 Lens Filter Shade 10 802411 Lens Filter Shade 11 802412 Lens Filter Shade 12 802413 Lens Filter Shade 13 802414 Lens Filter Shade 14

Heat Treated Filter Plate Lens4½ x 5¼

4-1/2” x 5-1/4” Heat treated fi lter plates are manufactured to Federal Specifi cation GGG-H-211D and ANSI STD. Z87.1Part# Description

804505 Lens Filter Shade 5 804506 Lens Filter Shade 6 804508 Lens Filter Shade 8 804509 Lens Filter Shade 9 804510 Lens Filter Shade 10

Part# Description 804511 Lens Filter Shade 11 804512 Lens Filter Shade 12 804513 Lens Filter Shade 13 804514 Lens Filter Shade 14

Heat Treated Filter Plate Lens50MM

Heat treated fi lter plates are manufactured to Federal Specifi cation GGG-H-211D and ANSI STD. Z87.1Part# Description

8050MM05 Lens Filter Shade 5 (Sold in pairs)

Glass Magnifying LensPart# Description

8GM24100 Lens Magnifi er Glass, Diopter 1.00 8GM24125 Lens Magnifi er Glass, Diopter 1.25 8GM24150 Lens Magnifi er Glass, Diopter 1.50 8GM24175 Lens Magnifi er Glass, Diopter 1.75 8GM24200 Lens Magnifi er Glass, Diopter 2.00 8GM24225 Lens Magnifi er Glass, Diopter 2.25 8GM24250 Lens Magnifi er Glass, Diopter 2.50 8GM24300 Lens Magnifi er Glass, Diopter 3.00

Clear “Safety” Lens100% polycarbonate. Manufactured to Federal Specifi cation GGG-H-211D and ANSI STD. Z87.1 Part# Description

8SC24 Clear “Safety”, 2 x 4-1/4 8SC45 Clear “Safety”, 4-1/2 x 5-1/4

Clear “Cover” Lens100% cast resin. Manufactured to Federal Specifi cation GGG-H-211D and ANSI STD. Z87.1Part# Description

8CC24 Clear “Cover”, 2 x 4-1/4 8CC45 Clear “Cover”, 4-1/2 x 5-1/4

Lens Cover HornellPart# Description

8H-0-9000 Lens outside cover Hornell 9000 (04-0270-00) 8H-I-F/V Lens inside cover Hornell 9000F/V (04-0290-00) 8H-I-X/XF Lens inside cover Hornell 9000X/XF (04-0280-00)



40

MARKING TOOLS & ACCESSORIES

WM100C Drill Tip Kit, Carded 12 drills per kit Contains one each of the following size bits: #52, #54, #56, #58, #60, #62, #64, #66, #68, #70, #72, #74

WM600C Deluxe wire cleaning kit, Carded Contains one each of the following size wires: #7, #8, #10, #12, #14, #15, #16, #17, #18, #22, #24, #26

Levels

WM1180C Level, Aluminum Pocket,

Carded

WM1190C Level, Magnetic 9” Carded

Drill & Wire Kits

Acid Brushes

Not Pictured: WM2301C

Brush Acid Black Horsehair 1/2, (6)Carded

WM2300C Brush Acid Black Horsehair 3/8,

(6)Carded

WM2302C Brush Acid Black Horsehair 5/8,

(6)Carded



41


Markers

WMA260C Marker Holder, Trades w/5 Asst.

Colors, Carded

WMB261C Marker Black Refi lls, Trades Round

(6) Carded

WMO261C Marker Orange Refi lls, Trades Round

(6) Carded

WMR261C Marker Red Refi lls, Trades Round (6)

Carded

WMR540C Marker Holder w/4 Flat Red Riter

Markers, Carded

WMR541C Markers, Flat Red Riter (12) Carded

WMS230C Marker Holder w/4 Round Silver

Streak Markers Carded

WMS231C Markers, Round Silver Streak (12)

Carded

WMS530C Marker Holder w/4 Flat Silver Streak

Markers Carded

WMS531C Markers, Flat Silver Streak (12)

Carded

WMW261C Marker White Refi lls, Trades Round

(6) Carded

WMY261C Marker Yellow Refi lls, Trades Round

(6) Carded

Trades Markers®, Silver Streak® and Red Riter® are trademarks owned by LA-CO® Industries, Inc. and are used with permission.



42


WM1300C Inspection Mirror with

Pocket Clip, Carded Includes completely fl exible

shaft (1” square mirror)

WM1350C Inspection Mirror, Carded Includes completely fl exible shaft (2” x 3-1/2” mirror)

Scribe Tools

WM810C Scribe 1/8 point, Carded (Tungsten carbide)

WM810MC Scribe 1/8 point with Magnet, Carded (Tungsten carbide point with

neodymium magnet)

WM840C Scribe 1/16 point with replaceable

point, Carded (Tungsten carbide)

WM844C 1/16 replacement points (2), Carded (Tungsten carbide points)

Mirrors



43


WM200C Round Soapstone Holder, Carded Includes 1 crayon

WM251C 4 Round Soapstone Crayons,

Carded

WM500C Flat Soapstone Holder, Carded Includes 1 crayon

WM528C 24 Flat Soapstone 1/16” Crayons,

Carded

WM551C 4 Flat Soapstone Crayons, Carded

Soapstone Tools

Tip & Refacing Cleaners

WM650C Standard wire type tip cleaner, Carded

WM650-12 Same as WM650C, but bulk packaged 12 per pack

WM660C “Long” wire type tip cleaner, Carded

WM660-12 Same as WM660C, but bulk packaged 12 per pack

WM2100C Tip Refacing Tool, Carded



44


Other Tools

WM300C Pic with straight position body, Carded Includes one straight tip and 90 degree bent tip

WM350C Pic with variable position body, Carded Includes one straight tip and one 90 degree bent tip with

fl oating handle

WM1600C Pic set, Carded Includes 4 heat-treated needlepoint

steel tools

WM1520C Tungsten Tote 7”, Carded

WM700C Bend-It-Magnet, Carded Includes 1 neodymium magnet (18” reach)

WMPP2210C Pliers, Carded 12 Function MIG Type

WMRW2220C Wrench, Carded Ratcheting Adjustable

WMTP1550C TIG Pen, Carded



45

MIG

Contact Tips

Part# Description Std PkWEM WMK11-23 Contact Tip .023 (25 Per Bag) ........................................................................................................25WEM WMK11-23-B Contact Tip .023 (P.O.P. 10 PK) ....................................................................................................1WEM WMK11-30 Contact Tip .030 (25 Per Bag) ........................................................................................................25WEM WMK11-30-B Contact Tip .030 (P.O.P. 10 PK) ....................................................................................................1WEM WMK11-35 Contact Tip .035 (25 Per Bag) ........................................................................................................25WEM WMK11-35-B Contact Tip .035 (P.O.P. 10 PK) ....................................................................................................1WEM WMK11-45 Contact Tip .045 (25 Per Bag) ........................................................................................................25WEM WMK11-45-B Contact Tip .045 (P.O.P. 10 PK) ....................................................................................................1WEM WMK11H-45 Contact Tip .045 (25 Per Bag) ........................................................................................................25WEM WMK11T-30 Contact Tip .030 (25 Per Bag) .....................................................................................................25WEM WMK11T-35 Contact Tip .035 (25 Per Bag) ........................................................................................................25WEM WMK11T-45 Contact Tip .045 (25 Per Bag) .....................................................................................................25WEM WMK14-116 Contact Tip 1/16 (25 Per Bag) ........................................................................................................25WEM WMK14-23 Contact Tip .023 (25 Per Bag) .....................................................................................................25WEM WMK14-30 Contact Tip .030 (25 Per Bag) ........................................................................................................25WEM WMK14-30-B Contact Tip .030 (P.O.P. 10 PK) ....................................................................................................1WEM WMK14-35 Contact Tip .035 (25 Per Bag) ........................................................................................................25WEM WMK14-35-B Contact Tip .035 (P.O.P. 10 PK) ....................................................................................................1WEM WMK14-40 Contact Tip .040 (25 Per Bag) ........................................................................................................25WEM WMK14-45 Contact Tip .045 (25 Per Bag) .....................................................................................................25WEM WMK14-45-B Contact Tip .045 (P.O.P. 10 PK) .......................................................................................................1WEM WMK14-52 Contact Tip .052 (25 Per Bag) .....................................................................................................25WEM WMK14-564 Contact Tip 5/64 (25 Per Bag) ........................................................................................................25WEM WMK14A-364 Contact Tip 3/64 (25 Per Bag) .....................................................................................................25WEM WMK14AH-364 Contact Tip 3/64 (25 Per Bag) ........................................................................................................25WEM WMK14H-116 Contact Tip 1/16 (25 Per Bag) .....................................................................................................25WEM WMK14H-35 Contact Tip .035 (25 Per Bag) ........................................................................................................25WEM WMK14H-35-B Contact Tip .035 (P.O.P. 10 PK) ....................................................................................................1WEM WMK14H-40 Contact Tip .040 (25 Per Bag) ........................................................................................................25WEM WMK14H-45 Contact Tip .045 (25 Per Bag) .....................................................................................................25WEM WMK14H-45-B Contact Tip .045 (P.O.P. 10 PK) .......................................................................................................1WEM WMK14H-52 Contact Tip .052 (25 Per Bag) .....................................................................................................25WEM WMK14H-564 Contact Tip 5/64 (25 Per Bag) ........................................................................................................25WEM WMK14T-116 Contact Tip 1/16 (25 Per Bag) .....................................................................................................25WEM WMK14T-30 Contact Tip .030 (25 Per Bag) ........................................................................................................25WEM WMK14T-35 Contact Tip .035 (25 Per Bag) .....................................................................................................25WEM WMK14T-45 Contact Tip .045 (25 Per Bag) ........................................................................................................25WEM WMK14T-52 Contact Tip .052 (25 Per Bag) .....................................................................................................25WEM WMK15AH-116 Contact Tip 1/16 (25 Per Bag) ........................................................................................................25WEM WMK15H-116 Contact Tip 1/16 (25 Per Bag) .....................................................................................................25WEM WMK15H-332 Contact Tip 3/32 (25 Per Bag) ........................................................................................................25WEM WMK15H-35 Contact Tip .035 (25 Per Bag) .....................................................................................................25WEM WMK15H-45 Contact Tip .045 (25 Per Bag) ........................................................................................................25WEM WMK15H-564 Contact Tip 5/64 (25 Per Bag) .....................................................................................................25WEM WMK15H-764 Contact Tip 7/64 (25 Per Bag) ........................................................................................................25WEM WMK15HFC-116 Contact Tip 1/16 (25 Per Bag) .....................................................................................................25

The Weldmark MIG product line is manufactured by Tweco®.

“Weldmark by Tweco”



46

MIG

Nozzles

Part# Description Std PkWEM WMK21-37 Nozzle 3/8 (2 Per Bag) .....................................................................................................................2WEM WMK21-37-B Nozzle 3/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK21-50 Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK21-50-B Nozzle 1/2 (P.O.P. 2 PK) .................................................................................................................1WEM WMK21-50F Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK21-62 Nozzle 5/8 (2 Per Bag) ....................................................................................................................2WEM WMK21T-37 Nozzle 3/8 (2 Per Bag) .....................................................................................................................2WEM WMK22-37 Nozzle 3/8 (2 Per Bag) ....................................................................................................................2WEM WMK22-50 Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK22-50-B Nozzle 1/2 (P.O.P. 2 PK) .................................................................................................................1WEM WMK22-50SS Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK22-50SS-B Nozzle 1/2 (P.O.P. 2 PK) .................................................................................................................1WEM WMK22-62 Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK22-62-B Nozzle 5/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK22-62SS Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK22-62SS-B Nozzle 5/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK22T-37SS Nozzle 3/8 (2 Per Bag) .....................................................................................................................2WEM WMK23-37 Nozzle 3/8 (2 Per Bag) ....................................................................................................................2WEM WMK23-50 Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK23-62 Nozzle 5/8 (2 Per Bag) ....................................................................................................................2WEM WMK23-62-B Nozzle 5/8 (P.O.P. 2 PK) ..................................................................................................................1WEM WMK23-75 Nozzle 3/4 (2 Per Bag) ....................................................................................................................2WEM WMK23H-62 Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK23T-37 Nozzle 3/8 (2 Per Bag) ....................................................................................................................2WEM WMK23T-37F Nozzle 3/8 (2 Per Bag) .....................................................................................................................2WEM WMK24A-37SS Nozzle 3/8 (2 Per Bag) ....................................................................................................................2WEM WMK24A-50 Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK24A-50-B Nozzle 1/2 (P.O.P. 2 PK) .................................................................................................................1WEM WMK24A-50SS Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK24A-50SSB Nozzle 1/2 (P.O.P. 2 PK) .................................................................................................................1WEM WMK24A-62 Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK24A-62-B Nozzle 5/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK24A-62SS Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK24A-62SSB Nozzle 5/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK24A-75 Nozzle 3/4 (2 Per Bag) .....................................................................................................................2WEM WMK24AH-62SS Nozzle 5/8 (2 Per Bag) ....................................................................................................................2WEM WMK24CT-50S Nozzle 1/2 (2 Per Bag) .....................................................................................................................2WEM WMK24CT-62R Nozzle 5/8 (2 Per Bag) ....................................................................................................................2WEM WMK24CT-62S Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK24CT-62SB Nozzle 5/8 (P.O.P. 2 PK) .................................................................................................................1WEM WMK24CT-75S Nozzle 3/4 (2 Per Bag) .....................................................................................................................2WEM WMK24FN-50S Nozzle 1/2 (2 Per Bag) ....................................................................................................................2WEM WMK24FN-62S Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK25CT-50 Nozzle 1/2 (2 Per Bag) ....................................................................................................................2WEM WMK25CT-62 Nozzle 5/8 (2 Per Bag) .....................................................................................................................2WEM WMK25CT-75 Nozzle 3/4 (2 Per Bag) ....................................................................................................................2





47

WMK1510023

MIG

MIG Guns

Part# Description Std PkWEM WMK1510023 MIG Gun, 150 AMP 10 FT .023 ........................... 1WEM WMK15103035 MIG Gun, 150 AMP 10 FT 030/035 Tweco ......... 1WEM WMK15103035L MIG Gun, 150 AMP 10 FT 030/035 Lincoln ....... 1WEM WMK15103035M MIG Gun, 150 AMP 10 FT 030/035 Miller ......... 1WEM WMK15153035 MIG Gun, 150 AMP 15 FT 030/035 Tweco ......... 1WEM WMK15153035L MIG Gun, 150 AMP 15 FT 030/035 Lincoln ....... 1WEM WMK15153035M MIG Gun, 150 AMP 15 FT 030/035 Miller ......... 1WEM WMK25103035 MIG Gun, 250 AMP 10 FT 030/035 Tweco ......... 1WEM WMK25103035L MIG Gun, 250 AMP 10 FT 030/035 Lincoln ....... 1WEM WMK25103035M MIG Gun, 250 AMP 10 FT 030/035 Miller ......... 1WEM WMK25104045 MIG Gun, 250 AMP 10 FT 040/045 Tweco ......... 1WEM WMK25104045L MIG Gun, 250 AMP 10 FT 040/045 Lincoln ....... 1WEM WMK25104045M MIG Gun, 250 AMP 10 FT 040/045 Miller ......... 1WEM WMK25123035 MIG Gun, 250 AMP 12 FT 030/035 Tweco ......... 1WEM WMK25123035L MIG Gun, 250 AMP 12 FT 030/035 Lincoln ....... 1WEM WMK25123035M MIG Gun, 250 AMP 12 FT 030/035 Miller ......... 1WEM WMK25124045 MIG Gun, 250 AMP 12 FT 040/045 Tweco ......... 1WEM WMK25124045L MIG Gun, 250 AMP 12 FT 040/045 Lincoln ....... 1WEM WMK25124045M MIG Gun, 250 AMP 12 FT 040/045 Miller ......... 1WEM WMK25153035 MIG Gun, 250 AMP 15 FT 030/035 Tweco ......... 1WEM WMK25153035L MIG Gun, 250 AMP 15 FT 030/035 Lincoln ....... 1WEM WMK25153035M MIG Gun, 250 AMP 15 FT 030/035 Miller ......... 1WEM WMK25153035X MIG Gun, 250 AMP 15 FT 030/035 Euro ............ 1WEM WMK25154045 MIG Gun, 250 AMP 15 FT 040/045 Tweco ......... 1WEM WMK25154045L MIG Gun, 250 AMP 15 FT 040/045 Lincoln ....... 1WEM WMK25154045M MIG Gun, 250 AMP 15 FT 040/045 Miller ......... 1WEM WMK25154045X MIG Gun, 250 AMP 15 FT 040/045 Euro ............ 1


Weldmark 250, 300 and 400 amp MIG Guns are exclusively designed for “Weldmark”.




48

MIG

MIG Guns

Part# Description Std PkWEM WMK3010116 MIG Gun, 300 AMP 10 FT 1/16 Tweco ................1WEM WMK3010116L MIG Gun, 300 AMP 10 FT 1/16 Lincoln ..............1WEM WMK3010116M MIG Gun, 300 AMP 10 FT 1/16 Miller ................1WEM WMK30103545 MIG Gun, 300 AMP 10 FT 035/045 Tweco ..........1WEM WMK30103545L MIG Gun, 300 AMP 10 FT 035/045 Lincoln ........1WEM WMK30103545M MIG Gun, 300 AMP 10 FT 035/045 Miller ..........1WEM WMK3015116 MIG Gun, 300 AMP 15 FT 1/16 Tweco ................1WEM WMK3015116L MIG Gun, 300 AMP 15 FT 1/16 Lincoln ..............1WEM WMK3015116M MIG Gun, 300 AMP 15 FT 1/16 Miller ................1WEM WMK30153545 MIG Gun, 300 AMP 15 FT 035/045 Tweco ..........1WEM WMK30153545L MIG Gun, 300 AMP 15 FT 035/045 Lincoln ........1WEM WMK30153545M MIG Gun, 300 AMP 15 FT 035/045 Miller ..........1WEM WMK4010116 MIG Gun, 400 AMP 10 FT 1/16 Tweco ................1WEM WMK4010116L MIG Gun, 400 AMP 10 FT 1/16 Lincoln ..............1WEM WMK4010116M MIG Gun, 400 AMP 10 FT 1/16 Miller ................1WEM WMK40103545 MIG Gun, 400 AMP 10 FT 035/045 Tweco ..........1WEM WMK40103545L MIG Gun, 400 AMP 10 FT 035/045 Lincoln ........1WEM WMK40103545M MIG Gun, 400 AMP 10 FT 035/045 Miller ..........1WEM WMK4010564 MIG Gun, 400 AMP 10 FT 5/64 Tweco ................1WEM WMK4010564L MIG Gun, 400 AMP 10 FT 5/64 Lincoln ..............1WEM WMK4010564M MIG Gun, 400 AMP 10 FT 5/64 Miller ................1WEM WMK4015116 MIG Gun, 400 AMP 15 FT 1/16 Tweco ................1WEM WMK4015116L MIG Gun, 400 AMP 15 FT 1/16 Lincoln ..............1WEM WMK4015116M MIG Gun, 400 AMP 15 FT 1/16 Miller ................1WEM WMK40153545 MIG Gun, 400 AMP 15 FT 035/045 Tweco ..........1WEM WMK40153545L MIG Gun, 400 AMP 15 FT 035/045 Lincoln ........1WEM WMK40153545M MIG Gun, 400 AMP 15 FT 035/045 Miller ..........1WEM WMK40153545X MIG Gun, 400 AMP 15 FT 035/045 Euro ............1WEM WMK4015564 MIG Gun, 400 AMP 15 FT 5/64 Tweco ................1WEM WMK4015564L MIG Gun, 400 AMP 15 FT 5/64 Lincoln ..............1WEM WMK4015564M MIG Gun, 400 AMP 15 FT 5/64 Miller ................1WEM WMK40253545 MIG Gun, 400 AMP 25 FT 035/045 Tweco ..........1WEM WMK40253545L MIG Gun, 400 AMP 25 FT 035/045 Lincoln ........1WEM WMK40253545M MIG Gun, 400 AMP 25 FT 035/045 Miller ..........1WEM WMK40123545M MIG Gun, 400 AMP 12 FT 035/045 Miller ..........1

WMK40103545

Weldmark 250, 300 and 400 amp MIG Guns are exclusively designed for “Weldmark”.





49

MIG

· Ergonomic Handle · New two-fi nger molded trigger · New “Diamond Grip” handle · Triple insulated stainless conductor tube · Inter-changeable rear plugs · Front and rear steel spring strain relief · Standard consumables by Tweco: · WMK 11 Series Contact Tips · WMK 21 Series Nozzle · WMK 51 Diffuser

Features and Benefi ts

Weldmark 150

DUTY CYCLE 60%AMP RATING WITH MIXED GASES 150 ampsHANDLE DESIGN Slightly curved ErgonomicHANDLE DETAILS Molded PlasticGUN LENGTHS AVAILABLE 10’, 15’NUMBER OF CONTROL WIRES 3REQUIRED TO CHANGE CONDUCTOR TUBE Disassemble handle and front connector of MIG gunCONDUCTOR TUBE INSULATION Triple Insulated Metal Jacketed TubeCONDUCTOR TUBES AVAILABLE 45deg, 60deg, 180degREAR CASE TYPE Round PlasticFRONT STRAIN REFLIEF Steel SpringREAR STRAIN RELIEF Steel SpringCONTACT TIPS WMK 11 SeriesNOZZLE WMK 21 SeriesDIFFUSER WMK 51 SeriesINSULATOR NoneWARRANTY 30 DaysPACKAGING BOXTYPICAL APPLICATIONS HVAC, Home Garage, Plumbing

Auto Body Repair



50

MIG

· Ergonomic Handle · New two-fi nger molded trigger · New “Diamond Grip” handle · Triple insulated stainless conductor tube · Inter-changeable rear plugs · Front and rear steel spring strain relief · Standard consumables by Tweco: · WMK 52 Diffuser · WMK 14 Series Contact Tips · WMK 22 Nozzles · WMK 32 Insulator


Weldmark 250

DUTY CYCLE 60%AMP RATING WITH MIXED GASES 250 ampsHANDLE DESIGN Slightly curved ErgonomicHANDLE DETAILS Molded PlasticGUN LENGTHS AVAILABLE 10’, 15’NUMBER OF CONTROL WIRES 4REQUIRED TO CHANGE CONDUCTOR TUBE Disassemble handle and front connector of MIG gunCONDUCTOR TUBE INSULATION Triple Insulated Metal Jacketed TubeCONDUCTOR TUBES AVAILABLE 45deg, 60deg, 180degREAR CASE TYPE Round PlasticFRONT STRAIN REFLIEF Steel SpringREAR STRAIN RELIEF Steel SpringCONTACT TIPS WMK 14 SeriesNOZZLE WMK 22 SeriesDIFFUSER WMK 52 SeriesINSULATOR WMK 32 InsulatorWARRANTY 30 DaysPACKAGING BOXTYPICAL APPLICATIONS Construction, Repair, Fabrication, Maintenance



51

MIG

· Ergonomic Handle · New two-fi nger molded trigger · New “Diamond Grip” handle · Triple insulated stainless conductor tube · Inter-changeable rear plugs · Front and rear steel spring strain relief · Standard consumables by Tweco: · WMK 14 Series Contact Tips · WMK 23 Series Nozzle · WMK 54A Diffuser


Weldmark 300

DUTY CYCLE 60%AMP RATING WITH MIXED GASES 300 ampsHANDLE DESIGN Slightly curved ErgonomicHANDLE DETAILS Molded PlasticGUN LENGTHS AVAILABLE 10’, 15’NUMBER OF CONTROL WIRES 4REQUIRED TO CHANGE CONDUCTOR TUBE Disassemble handle and front connector of MIG gunCONDUCTOR TUBE INSULATION Triple Insulated Metal Jacketed TubeCONDUCTOR TUBES AVAILABLE 45deg, 60deg, 180degREAR CASE TYPE Round PlasticFRONT STRAIN REFLIEF Steel SpringREAR STRAIN RELIEF Steel SpringCONTACT TIPS WMK 14 SeriesNOZZLE WMK 23 SeriesDIFFUSER WMK 54A SeriesINSULATOR NoneWARRANTY 30 DaysPACKAGING BOXTYPICAL APPLICATIONS Heavy Fabrication, Manufacturing



52

MIG

· Ergonomic Handle · New two-fi nger molded trigger · New “Diamond Grip” handle · Triple insulated stainless conductor tube · Inter-changeable rear plugs · Front and rear steel spring strain relief · Standard consumables by Tweco: · WMK 14 Series Contact Tips · WMK 24A Nozzles · WMK 54A Diffuser · WMK 34A Insulator


Weldmark 400

DUTY CYCLE 60%AMP RATING WITH MIXED GASES 400 ampsHANDLE DESIGN Slightly curved ErgonomicHANDLE DETAILS Molded PlasticGUN LENGTHS AVAILABLE 10’, 15’NUMBER OF CONTROL WIRES 4REQUIRED TO CHANGE CONDUCTOR TUBE Disassemble handle and front connector of MIG gunCONDUCTOR TUBE INSULATION Triple Insulated Metal Jacketed TubeCONDUCTOR TUBES AVAILABLE 45deg, 60deg, 180degREAR CASE TYPE Round PlasticFRONT STRAIN REFLIEF Steel SpringREAR STRAIN RELIEF Steel SpringCONTACT TIPS WMK 14 SeriesNOZZLE WMK 24A SeriesDIFFUSER WMK 54A SeriesINSULATOR WMK 34A InsulatorWARRANTY 30 DaysPACKAGING BOXTYPICAL APPLICATIONS Heavy Fabrication, Manufacturing



53

Part# Description Std PkDiffusers & InsulatorsWEM WMK32 Insulator (5 Per Bag) ...................................................................................................................................25WEM WMK32-B Insulator (P.O.P. 2 PK) ................................................................................................................................1WEM WMK34A Insulator (5 Per Bag) ...................................................................................................................................25WEM WMK34A-B Insulator (P.O.P. 2 PK) ................................................................................................................................1WEM WMK34CT Nozzle Insulator (2 Per Bag) .........................................................................................................................2WEM WMK34CT-B Nozzle Insulator (P.O.P. 2 PK) ...................................................................................................................1WEM WMK34FN Nozzle Insulator (2 Per Bag) .........................................................................................................................2WEM WMK35-50 Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK35CT Nozzle Insulator (2 Per Bag) .........................................................................................................................2WEM WMK51 Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK51-B Diffuser (P.O.P. 2 PK) ...................................................................................................................................1WEM WMK52 Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK52-B Diffuser (P.O.P. 2 PK) ...................................................................................................................................1WEM WMK52FN Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK52FN-B Diffuser (P.O.P. 2 PK) ...................................................................................................................................1WEM WMK54A Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK54A-B Diffuser (P.O.P. 2 PK) ...................................................................................................................................1WEM WMK55H Diffuser (5 Per Bag) .....................................................................................................................................5WEM WMK55SW Diffuser (5 Per Bag) ......................................................................................................................................5ConduitsWEM WMK42303515 Conduit 030/035 15 FT .................................................................................................................................1WEM WMK42303525 Conduit 030/035 25 FT ................................................................................................................................1WEM WMK42404515 Conduit 040/045 15 FT .................................................................................................................................1WEM WMK42404525 Conduit 040/045 25 FT ................................................................................................................................1WEM WMK42N354515 Conduit Nylon 035/045 15 FT ......................................................................................................................1WEM WMK44-116-15 Conduit 1/16 15 FT ......................................................................................................................................1WEM WMK44-116-25 Conduit 1/16 25 FT .......................................................................................................................................1WEM WMK44-564-15 Conduit 5/64 15 FT ......................................................................................................................................1WEM WMK44-564-25 Conduit 5/64 25 FT .......................................................................................................................................1WEM WMK44354515 Conduit 035/045 15 FT ................................................................................................................................1WEM WMK44354525 Conduit 035/045 25 FT .................................................................................................................................1WEM WMK44N11615 Conduit Nylon 1/16 15 FT ..........................................................................................................................1WEM WMK44N354515 Conduit Nylon 035/045 15 FT ......................................................................................................................1WEM WMK45-116-15 Conduit 1/16 15 FT ......................................................................................................................................1WEM WMK45354515 Conduit 035/045 15 FT .................................................................................................................................1WEM WMK45H33215 Conduit 3/32 15 FT ......................................................................................................................................1PartsWEM 104 Block Assembly.............................................................................................................................................1WEM 122FM Binder Screw & Post ...................................................................................................................................1WEM 224 O-Ring ...........................................................................................................................................................1WEM 244 Control Wire Terminal ................................................................................................................................1WEM 44C Set Screw #8-32 Size Set Screw ...................................................................................................................1WEM 62J60 Conductor Tube Assy, 60 Degree ................................................................................................................1WEM 63J60 Conductor Tube Assy, 60 Degree ..................................................................................................................1WEM 64J60 Conductor Tube Assy, 60 Degree ................................................................................................................1WEM 91C Switch Blade Set for 150/250 AMP Guns .....................................................................................................1WEM 92C Switch Blade Set for 300/400 AMP Guns ..................................................................................................1WEM WM92 Trigger Switch for 300/400 AMP Guns ........................................................................................................1WEM WM102 Block Assembly ............................................................................................................................................1WEM WM15060 Conductor Tube, 60 Degree, 150 AMP Gun .................................................................................................1WEM WM91 Trrigger Switch for 150/250 AMP Gun .....................................................................................................1WEM WMK180 Handle Assy 150/250 AMP Guns ..................................................................................................................1WEM WMK480 Handle Assy 300/400 AMP Guns ................................................................................................................1

MIG

Gas Diffusers, Insulators, Conduits and Parts





54

CARBON RODS

Part Number Description Std. Pkg.WMK22-023-003 Pointed Carbons1/8 x 12 DC-CC ..............................Bx (100)WMK22-033-003 Pointed Carbons3/16 x 12 DC-CC ..............................Bx (50)WMK22-043-003 Pointed Carbons1/4 x 12 DC-CC ................................Bx (50)WMK22-053-003 Pointed Carbons5/16 x 12 DC-CC ..............................Bx (50)WMK22-063-003 Pointed Carbons3/8 x 12 DC-CC ................................Bx (50)WMK22-082-003 Pointed Carbons1/2 x 14 DC-CC ................................Bx (50)WMK22-983-003 Pointed Carbons5/32 x 12 DC-CC ..............................Bx (50)WMK24-064-003 Carbons3/8 x 17 DC-CC-Jointed ..............................Bx (100)WMK24-084-003 Carbons1/2 x 17 DC-CC-Jointed ..............................Bx (100)WMK24-104-003 Carbons5/8 x 17 DC-CC-Jointed ..............................Bx (100)WMK24-124-003 Carbons3/4 x 17 DC-CC-Jointed ..............................Bx (100)WMK35-099-003 Flat Carbons3/8 x 5/32 x 12 DC ..................................Bx (50)WMK35-033-003 Flat Carbons5/8 x x3/16 x 12 DC ................................Bx (50)

CARBON ARC TORCHES

Part Number Description Std. Pkg.WEM WMK 3501 Gouging Torch Less Cable Assy Up To 600AMPS (AEC-3501) ............................................. 1WEM WMK 3500-1 Gouging Torch with 7’ Swivel Cable Assy (AEC-3500-1) ....................................................... 1WEM WMK 3500-12-1 Gouging Torch with 12’ Swivel Cable Assy (AEC-3500-12-1) ............................................... 1WEM WMK 4001 Gouging Torch Less Cable Assy Up To 1000 AMPS (AEC-4001) .......................................... 1WEM WMK 4000-1 Gouging Torch with 7’ Swivel Cable Assy (AEC-4000-1) ....................................................... 1WEM WMK 4000-12-1 Gouging Torch with 12’ Swivel Cable Assy (AEC-4000-12-1) ............................................... 1WEM WMK 4501 Gouging Torch Less Cable Assy Up To 1250 AMPS (AEC-4501) .......................................... 1WEM WMK 4500-1 Gouging Torch with 7’ Swivel Cable Assy (AEC-4500-1) ....................................................... 1WEM WMK 4500-12-1 Gouging Torch with 12’ Swivel Cable Assy (AEC-4500-12-1) ............................................... 1WEM WMK 3-045-CF Gouging Torch Hook Up Kit (AEC-3-405-CF) ........................................................................ 1WEM WMK-403 Insulator Assy W/ Screws (AEC-403) ...................................................................................... 1WEM WMK-305 Swivel Head W/ Screw (AEC-305) .......................................................................................... 1WEM WMK-316R Spool Assy (AEC-316R) ........................................................................................................... 1WEM WMK-375 Handle For 3500/3500-1 (AEC-375) ........................................................................................ 1WEM WMK-450 Handle For 4000-1/4500-1 (AEC-450) ..................................................................................... 1

• Unique positive shut-off valve design • Easy fi eld repair for shut-off valve • Special high impact, heat resistant

material on insulators, handles, & lever • Special copper alloy forged body • Available with 7’ or 12’ swivel cable

assemblies.



55

PLASMA CONSUMABLES

Part# Description Std PkESABWEM 18204 Cup (PT31) ESAB (10 per pack) ...........................................................................................................................10WEM 19915 Cutting Tip .046 (PT17) ESAB (5 per pack) ........................................................................................................5 WEM 19916 Cutting Tip .052 (PT17) ESAB (5 per pack)............................................................................................................5 WEM 19917 Cutting Tip .057 (PT17) ESAB (5 per pack) ........................................................................................................5 WEM 19918 Electrode (PT17) ESAB (10 per pack)...................................................................................................................10 WEM 19989 Heat Shield Guard, Drag (PT17) ESAB ...............................................................................................................1 WEM 20008 Torch Body (PT17) ESAB .......................................................................................................................................1 WEM 20053 Electrode Stem (PT17) ..........................................................................................................................................1 WEM 20056 Cutting Tip .067 (PT17) ESAB (5 per pack)............................................................................................................5 WEM 20072 Torch Body(PT31) ESAB .......................................................................................................................................1 WEM 20282 Heat Shield (PT31) ESAB .......................................................................................................................................1WEM 20324 Plunger (PT31) ESAB (5 per pack) ......................................................................................................................5 WEM 20463 Swirl Baffl e (PT31) ESAB (10 per pack) ..............................................................................................................10 WEM 20747 Heat Shield (PT17) ESAB ......................................................................................................................................1 WEM 20860 Cutting Tip XT 30 AMP (PT31) ESAB (10 per pack) ...........................................................................................10 WEM 20861 Cutting Tip XT 50 AMP (PT31) ESAB (10 per pack) .......................................................................................10 WEM 20862 Electrode XT (PT31) ESAB (10 per pack) ............................................................................................................10 WEM 21008 Cutting Tip XT 40 AMP (PT31) ESAB (10 per pack) .......................................................................................10 WEM 21150 Electrode (PT20) ESAB (10 per pack)...................................................................................................................10 WEM 21326 Heat Shield (PT20) ESAB ......................................................................................................................................1 WEM 21328 Cutting Nozzle 100 AMP (PT20) ESAB (5 per pack) .............................................................................................5 WEM 21329 Cutting Nozzle 70 AMP (PT20) ESAB (5 per pack) ............................................................................................5 WEM 21330 Cutting Nozzle 50 AMP (PT20) ESAB (5 per pack) ...............................................................................................5 WEM 21332 Electrode Holder (PT20) ESAB ............................................................................................................................1 WEM 21359 Torch Body (PT20) ESAB .......................................................................................................................................1 WEM 21372 Electrode Seat (PT20) ESAB .................................................................................................................................1 WEM 21373 Insulator (PT20) ESAB ............................................................................................................................................1 WEM 21610 Torch Body (PT27) ESAB ......................................................................................................................................1 WEM 21616 Heat Shield (PT27) ESAB .......................................................................................................................................1 WEM 33366 Electrode (PT27) ESAB (10 per pack) ................................................................................................................10 WEM 33367 Swirl Baffl e (PT27) ESAB (5 per pack) ..................................................................................................................5 WEM 33368 Cutting Nozzle 30 AMP (PT27) ESAB (10 per pack) ........................................................................................10 WEM 33369 Cutting Nozzle 50 AMP (PT27) ESAB (10 per pack) ...........................................................................................10WEM 33418 CUTTING NOZZLE 80 AMP (PT27) ESAB (10 PER PACK) ............................................................................10

ESAB® - PT31, PT17, PT20, PT27 are registered trademarks of ESAB.PCH-M100, PCH-M51, 3A, PCH20, 4A, PCH-M75, PCH25, PCH52, PCHM35, PCHM62, PCH-102 are registered trademarks of Thermal Dynamics, Corp.Hypertherm® Max 40, Max100, Max20, Max42, Max-100D, Max3070, Max121, Max800, Max1100, Max350, Max600 are registered trademarks of Hypertherm, Inc. (Weldmark Plasma Consumables continues on next page)



56

PLASMA CONSUMABLES

Part# Description Std PkHyperthermWEM 020101 Swirl Ring (Max 40) Hypertherm (2 per pack) ...................................................................................................2WEM 020102 Nozzle/Tip (Max 40) Hypertherm (10 per pack) ...................................................................................................10 WEM 020103 Electrode (Max 40) Hypertherm (10 per pack) .................................................................................................10 WEM 020104 Retaining Cap (Max 40) ...........................................................................................................................................1 WEM 020115 Nozzle/Tip (Max 40) Hypertherm (10 per pack) ...............................................................................................10WEM 020122 Torch Body (Max 40) Hypertherm ..........................................................................................................................1 WEM 020131 Nozzle/Tip PIPE (Max 40) Hypertherm (10 per pack) .....................................................................................10 WEM 020184 Retaining Cap (Max 100) Hypertherm ....................................................................................................................1 WEM 020189 Torch Body (Max 100) Hypertherm .....................................................................................................................1 WEM 020191 Electrode (Max 100) Hypertherm (5 per pack) ........................................................................................................5 WEM 020193 Electrode (Max 100) Hypertherm (5 per pack) ...................................................................................................5WEM 020194 Swirl Ring (Max 100) Hypertherm (2 per pack) .....................................................................................................2WEM 020195 Nozzle .059 100 AMP (Max 100) Hypertherm (5 per pack) ...............................................................................5 WEM 020203 Nozzle .038 40 AMP (Max 100) Hypertherm (5 per pack) .....................................................................................5 WEM 020218 Retaining Cap (Max 20).........................................................................................................................................1 WEM 020220 Electrode (Max 20) Hypertherm (10 per pack) ......................................................................................................10 WEM 020239 Swirl Ring (Max 20) Hypertherm (2 per pack) ..................................................................................................2 WEM 020299 Cutting Tip (Max 20) Hypertherm (10 per pack) ...................................................................................................10 WEM 020333 Defl ector (Max 100) Hypertherm .........................................................................................................................1 WEM 020334 Shield Cap (Max 100) Hypertherm ..........................................................................................................................1 WEM 020335 Shield Cap,CASTLE (Max 100) Hypertherm .....................................................................................................1 WEM 020336 Shield Cap (Max 100) Hypertherm ..........................................................................................................................1 WEM 020337 Nozzle .059 100 AMP (Max 100) Hypertherm (5/Pack) ......................................................................................5 WEM 020345 Nozzle .052 80 AMP (Max 100) Hypertherm (5 per pack) .....................................................................................5 WEM 020350 Nozzle .038 40 AMP (Max 42) Hypertherm (10/Pack) ......................................................................................10 WEM 020361 Swirl Ring (Max 42) Hypertherm (2 per pack) .......................................................................................................2 WEM 020381 Nozzle 20 AMP (Max 20) Hypertherm (10 per pack) .......................................................................................10 WEM 020382 Electrode (Max 20) Hypertherm (10 per pack) ......................................................................................................10 WEM 020395 Nozzle .042 (Max 42) Hypertherm (10 per pack) ..............................................................................................10 WEM 020396 Nozzle .038 40 AMP (Max 100) Hypertherm (5 per pack) .....................................................................................5 WEM 020397 Nozzle .052 80 AMP (Max 100) Hypertherm (5/Pack) ........................................................................................5 WEM 020546 Nozzle (Max 42) Hypertherm (10 per pack) ..........................................................................................................10 WEM 020563 Nozzle (Max 100) Hypertherm (5 per pack) ........................................................................................................5 WEM 020564 Electrode (Max 100) Hypertherm (5 per pack) ........................................................................................................5 WEM 020637 Swirl Ring (HD3070) Hypertherm ......................................................................................................................1 WEM 020647 Nozzle 70 AMP (HD3070) Hypertherm ..................................................................................................................1 WEM 020687 Shield Cap W/ I.H.S. TAB (HD3070) Hypertherm .............................................................................................1 WEM 020705 Nozzle 100 AMP (Max 100D) Hypertherm (5 per pack) .........................................................................................5 WEM 020706 Swirl Ring (Max 100D) Hypertherm(2 per pack) ..............................................................................................2 WEM 020744 Electrode, Gouging (Max 100) Hypertherm (5/Pack) ..............................................................................................5

ESAB® - PT31, PT17, PT20, PT27 are registered trademarks of ESAB.PCH-M100, PCH-M51, 3A, PCH20, 4A, PCH-M75, PCH25, PCH52, PCHM35, PCHM62, PCH-102 are registered trademarks of Thermal Dynamics, Corp.Hypertherm® Max 40, Max100, Max20, Max42, Max-100D, Max3070, Max121, Max800, Max1100, Max350, Max600 are registered trademarks of Hypertherm, Inc.

(Weldmark Plasma Consumables continues on next page)



57

PLASMA CONSUMABLES

Part# Description Std PkHypertherm (cont.)WEM 020789 Swirl Ring (HD3070) Hypertherm..........................................................................................................................1WEM 020930 Retaining Cap (Max 42) Hypertherm ..................................................................................................................1 WEM 020937 Swirl Ring (HD3070) Hypertherm..........................................................................................................................1 WEM 020941 Shield 30 AMP Stainless Steel (HD3070) Hypertherm .......................................................................................1 WEM 020947 Swirl Ring (HD3070) Hypertherm..........................................................................................................................1 WEM 120092 Nozzle (Max 42) Hypertherm (10 per pack) ......................................................................................................10 WEM 120111 Electrode (Max 3070) Hypertherm ..........................................................................................................................1 WEM 120112 Electrode (Max 3070) Hypertherm .......................................................................................................................1 WEM 120113 Electrode (HD3070) Hypertherm .............................................................................................................................1 WEM 120272 Nozzle 100 AMP (HD3070) Hypertherm ..............................................................................................................1 WEM 120282 Nozzle (Max 800) Hypertherm (5 per pack) ............................................................................................................5 WEM 120303 Defl ector Ring ( Max 80) Hypertherm ................................................................................................................1 WEM 120304 Nozzle (Max 800) Hypertherm (5 per pack) ............................................................................................................5 WEM 120305 Nozzle, Pipe (Max 800) Hypertherm(5 per pack)................................................................................................5 WEM 120410 Electrode (Max 3070) Hypertherm ..........................................................................................................................1 WEM 120433 Electrode (Max 100) Hypertherm (5 per pack) ...................................................................................................5 WEM 120473 Electrode (Max 1100) Hypertherm (5 per pack) ......................................................................................................5 WEM 120474 Swirl Ring (Max 1100) Hypertherm (2 per pack) ..............................................................................................2 WEM 120475 Shield Defl ector (Max 1100) Hypertherm ...............................................................................................................1 WEM 120476 Nozzle 80 AMP (Max 1100) Hypertherm (5 per pack) ........................................................................................5 WEM 120483 Retaining Cap (Max 1100) Hypertherm ...................................................................................................................1 WEM 120504 Nozzle 25 AMP (Max 350) Hypertherm (10 per pack) .....................................................................................10 WEM 120515 Nozzle 40 AMP (Max 1100) Hypertherm (5 per pack) ............................................................................................5 WEM 120517 Electrode (Max 1100) Hypertherm (5 per pack) .................................................................................................5 WEM 120518 Nozzle (Max 1100) Hypertherm (5 per pack) ..........................................................................................................5 WEM 120519 Defl ector (Max 1100) Hypertherm ........................................................................................................................1 WEM 120520 Retaining Cap (Max 1100) Hypertherm ...................................................................................................................1 WEM 120573 Electrode (Max 800) Hypertherm (5 per pack) ...................................................................................................5 WEM 120574 Electrode (Max 800) Hypertherm (5 per pack) ........................................................................................................5 WEM 120576 Swirl Ring (Max 800) Hypertherm (2 per pack) ................................................................................................2 WEM 120577 Nozzle (Max 800) Hypertherm (5 per pack) ............................................................................................................5 WEM 120578 Nozzle (Max 800) Hypertherm (10 per pack) ....................................................................................................10 WEM 120589 Electrode (HD3070) Hypertherm .............................................................................................................................1 WEM 120590 Swirl Ring (HD3070) Hypertherm ......................................................................................................................1 WEM 120600 Retaining Cap (Max 800) Hypertherm ....................................................................................................................1 WEM 120601 Shield (Max 800) Hypertherm ..............................................................................................................................1 WEM 120602 Shield (Max 800) Hypertherm .................................................................................................................................1 WEM 120606 Nozzle (Max 800) Hypertherm (10 per pack) ....................................................................................................10 WEM 120607 Nozzle, Gouging (Max 800) Hypertherm (10 per pack) ........................................................................................10 WEM 120608 Shield, Gouging (Max 800) Hypertherm ..............................................................................................................1 WEM 120826 Nozzle (Max 600) Hypertherm (5 per pack) ............................................................................................................5




58

PLASMA CONSUMABLES

Part# Description Std PkHypertherm (cont.)WEM 120828 Shield (Max 600) Hypertherm .................................................................................................................................1 WEM 120931 Nozzle Hypertherm (5 per pack) ..........................................................................................................................5 Thermal DynamicsWEM 8-1100 Shield Cup (PCH/M100) Thermal Dynamics (10 per pack) ..................................................................................10 WEM 8-1101 Shield Cup (PCH/M100) Thermal Dynamics (10 per pack) ............................................................................10 WEM 8-2007 Electrode .093 (3A) Thermal Dynamics (5 per pack) ..............................................................................................5 WEM 8-2151 Shield Cup (PCH/M51) Thermal Dynamics ........................................................................................................1 WEM 8-2152 Shield Cup (PCH/M51) Thermal Dynamics (2 per pack) ........................................................................................2 WEM 8-3040 Shield Cup (3A) Thermal Dynamics ....................................................................................................................1 WEM 8-3214 Shield Cup (PCH20) Thermal Dynamics (2 per pack) ............................................................................................2 WEM 8-3218 Cutting Tip .033 (PCH20) Thermal Dynamics (10 per pack) ..........................................................................10 WEM 8-3233 Gas Distributor (PCH20) Thermal Dynamics (10 per pack)..................................................................................10 WEM 8-3331 Electrode (PCH52) Thermal Dynamics (10 per pack) ......................................................................................10 WEM 8-4011 Liner (4A) Thermal Dynamics .................................................................................................................................1 WEM 8-4012 Liner/Gas Distributor (4A) Thermal Dynamics ..................................................................................................1 WEM 8-4024 Collar (4A) Thermal Dynamics ...............................................................................................................................1 WEM 8-4025 Lubricate Thermal Dynamics ...............................................................................................................................1 WEM 8-5526 Shield Cup, Crown (PCH/M51) Thermal Dynamics (5 per pack) ...........................................................................5 WEM 8-7500 Shield Cup (PCH/M75) Thermal Dynamics ........................................................................................................1 WEM 8-7501 Gas Distributor (PCH/M75) Thermal Dynamics (5 per pack) .................................................................................5 WEM 8-7502 Electrode (PCH/M75) Thermal Dynamics (5 per pack) .....................................................................................5 WEM 8-7503 Drag Tip .039 35 AMP (PCH/M75) Thermal Dynamics (5 per pack ......................................................................5 WEM 8-7504 Cutting Tip .047 55AMP (PCH/M75)Thermal Dynamics (5 per pack).............................................................5 WEM 8-7505 Cutting Tip 70 AMP (PCH/M75) Thermal Dynamics (5 per pack) .........................................................................5 WEM 8-7506 Gouging Tip .073 (PCH/M75) Thermal Dynamics (5 per pack) ........................................................................5 WEM 8-7507 Shield Cup, Castle (PCH/M75) Thermal Dynamics ................................................................................................1 WEM 8-7508 Gas Distributor, Gouging (PCH/M75 Thermal Dynamics .................................................................................1 WEM 8-7510 Torch Body, 70 (PCH/M75) Thermal Dynamics .....................................................................................................1 WEM 8-7514 Cutting Tip (PCH/M75) Thermal Dynamics (5 per pack) .................................................................................5 WEM 8-7515 Cutting Tip (PCH/M75) Thermal Dynamics (5/PACK)...........................................................................................5 WEM 8-7575 Stand-Off Guide (PCH/M75) Thermal Dynamics ..............................................................................................1 WEM 9-1775 Electrode .093 (3A) Thermal Dynamics ..................................................................................................................1 WEM 9-1779 Back Cap (3A) Thermal Dynamics .......................................................................................................................1 WEM 9-1780 Collet (3A) Thermal Dynamics ................................................................................................................................1 WEM 9-1791 Tip .081 75 AMP (3A) Thermal Dynamics (10 per pack) .................................................................................10 WEM 91-1795 Tip .093 150 AMP (3A) Thermal Dynamics (10 per pack) ...................................................................................10 WEM 9-1803 Back CAP (3A) Thermal Dynamics ......................................................................................................................1 WEM 9-1810 GAUGE/WRENCH ASSY (3A) Thermal Dynamics ..............................................................................................1 WEM 9-1811 Tip .093 130 AMP (3A) Thermal Dynamics (10 per pack) ...............................................................................10WEM 9-1827 Electrode .187 (4A) Thermal Dynamics (5 per pack) ..............................................................................................5WEM 9-1877 Back Cap (4A) Thermal Dynamics .......................................................................................................................1




59

PLASMA CONSUMABLES

Part# Description Std PkThermal Dynamics (cont.)WEM 9-1891 Tip .093 125 AMP (4A) Thermal Dynamics (10 per pack) .........................................................................10 WEM 9-1892 Tip .125 150 AMP (4A) Thermal Dynamics (10 per pack) .....................................................................10 WEM 9-2204 Gas Distributor (4A) Thermal Dynamics .......................................................................................................1 WEM 9-2240 Gas Distributor (3A) Thermal Dynamics ...................................................................................................1 WEM 9-4340 Electrode (PCH/M100) Thermal Dynamics (5/Pack) ....................................................................................5 WEM 9-4341 Cutting Tip .059 (PCH/M100) Thermal Dynamics (5 per pack) .............................................................5 WEM 9-4476 Cutting Tip 20 AMP (PCH25) Thermal Dynamics (10 per pack) ................................................................10 WEM 9-5617 Shield Cup (PCH52) Thermal Dynamics (10 per pack) .........................................................................10 WEM 9-5619 Electrode (PCH52) Thermal Dynamics (10 per pack) .................................................................................10 WEM 9-5630 Shield Cup (PCH/M51) Thermal Dynamics (10/Pack) ...........................................................................10 WEM 9-5631 Cutting Tip .043 (PCH/M51) Thermal Dynamics (10 per pack) .................................................................10 WEM 9-5633 Electrode (PCH/M51) Thermal Dynamics (10/Pack) .............................................................................10 WEM 9-5635 Torch Body, 70 (PCH/M51) Thermal Dynamics ...........................................................................................1 WEM 9-5642 Torch Body, 70 (PCH52) Thermal Dynamics ............................................................................................1 WEM 9-5694 Shield Cup, Crown (PCH52) Thermal Dynamics (10 per pack) .................................................................10 WEM 9-5702 Cutting Tip .031 35 AMP (PCH52) Thermal Dynamics (10 per pack) ..................................................10 WEM 9-5707 Cutting Tip .047 70 AMP (PCH52) Thermal Dynamics (10 per pack) ........................................................10 WEM 9-5708 Cutting Tip .059 105 AMP (PCH52)Thermal Dynamics (10 per pack) .................................................10 WEM 9-5711 Electrode Drag (PCH52) Thermal Dynamics (10 per pack) ........................................................................10 WEM 9-5781 Shield Cup (PCH52) Thermal Dynamics ...................................................................................................1 WEM 9-5807 Torch Body, 70 (PCH/M35) Thermal Dynamics ...........................................................................................1 WEM 9-6000 Cutting Tip 35 AMP (PCH/M35) Thermal Dynamics (10 per pack) .....................................................10 WEM 9-6001 Cutting Tip Drag (PCH/M35) Thermal Dynamics (10 per pack) ................................................................10 WEM 9-6003 Shield Cup (PCH/M35) Thermal Dynamics ..............................................................................................1 WEM 9-6004 Shield Cup, Crown (PCH/M35) Thermal Dynamics .....................................................................................1 WEM 9-6006 Electrode (PCH/M35) Thermal Dynamics (10 per pack) .......................................................................10 WEM 9-6006-FLUTE Electrode “Fluted” (PCH/M35) Thermal Dynamics (10 per pack)..............................................................10 WEM 9-6007 Gas Distributor (PCH/M35) Thermal Dynamics (5 per pack).................................................................5 WEM 9-6500 Tip, Stand-Off (PCH/M35) Thermal Dynamics (10 per pack) ....................................................................10 WEM 9-6501 Cutting Tip, Drag (PCH/M35) Thermal Dynamics (10 per pack) .........................................................10 WEM 9-6503 Shield Cup (PCH/M35) Thermal Dynamics ..................................................................................................1 WEM 9-6506 Electrode (PCH/M35) Thermal Dynamics (10 per pack) .......................................................................10 WEM 9-6506-FLUTE Electrode “Fluted” (PCH/M35) Thermal Dynamics (10 per pack)..............................................................10 WEM 9-6507 Gas Distributor (PCH/M35) Thermal Dynamics (5 per pack).................................................................5 WEM 9-7726 Cutting Tip .049 60 AMP (PCH/M75Thermal Dynamics (5 per pack) .........................................................5 WEM 9-8400 Shield Cup (PCH/M62) Thermal Dynamics ..............................................................................................1 WEM 9-8401 Gas Distributor (PCH/M62) Thermal Dynamics ...........................................................................................1 WEM 9-8402 Electrode (PCH/M62) Thermal Dynamics (5 per pack) ...........................................................................5 WEM 9-8406 Cutting Tip 100 AMP (PCH102) Thermal Dynamics (5 per pack) ................................................................5 WEM 9-8407 Electrode (PCH102) Thermal Dynamics (5 per pack) ..............................................................................5 WEM 9-8411 Cutting Tip Thermal Dynamics (5 per pack) .................................................................................................5 WEM 9-8412 Tip, Stand-Off 40 AMP Thermal Dynamics (10 per pack) .....................................................................10

ESAB® - PT31, PT17, PT20, PT27 are registered trademarks of ESAB.PCH-M100, PCH-M51, 3A, PCH20, 4A, PCH-M75, PCH25, PCH52, PCHM35, PCHM62, PCH-102 are registered trademarks of Thermal Dynamics, Corp.Hypertherm® Max 40, Max100, Max20, Max42, Max-100D, Max3070, Max121, Max800, Max1100, Max350, Max600 are registered trademarks of Hypertherm, Inc.



60

PIPE STAND

Part# Description Std. Pkg.WEM FOLDING JACK Folding Pipe Stand “V” Head, Adjustable 27” - 42” (ST881) 1

Pipe Stand Standard Features:

2,000 lb/900 kg capacity Handles up to 36”/900 mm pipe Folding legs Set screw 1 1/2” acme adjustment thread 27” to 42” Vee head locks for storage Lightweight Convenient carrying handle Large comforable adjustment handle 1”/25 mm square legs CE rated Great Price



61

(Stainless Steel brushes are made of 302 stainless.)

*

SCRATCH & ACID BRUSHES

Part# Description Std. Pkg. WM600138 Brush Acid Black Horsehair 3/8 width (Gross) ............................................................................ 1 gr WM600212 Brush Acid Black Horsehair 1/2 width (Gross) ............................................................................ 1 gr WM600319 Brush Scratch Curved Handle 3x19 CS ...........................................................................................12 WM600358 Brush Acid Black Horsehair 5/8 width (Gross) ............................................................................ 1 gr WM600416 Brush Scratch Shoe Handle 4x16 CS ...............................................................................................12 WM600419 Brush Scratch Curved Handle 4x19 CS ...........................................................................................12 WM601037 Brush Scratch Curved Handle Toothbrush 3x7 SS ..........................................................................12 WM601237 Brush Scratch Plastic Handle Toothbrush 3x7 SS ...........................................................................12 WM601319 Brush Scratch Curved Handle 3x19 SS ...........................................................................................12 WM601337 Brush Scratch Curved Handle Toothbrush 3x7 Brass ......................................................................12 WM601416 Brush Scratch Shoe Handle 4x16 SS ...............................................................................................12 WM601419 Brush Scratch Curved Handle 4x19 SS ...........................................................................................12*WM601437 Brush Scratch Curved Handle Toothbrush Hand/Tied 3x7 SS ........................................................12 WM2300C Brush Acid Black Horsehair 3/8 Carded 6 per card ...........................................................................6 WM2301C Brush Acid Black Horsehair 1/2 Carded 6 per card ...........................................................................6 WM2302C Brush Acid Black Horsehair 5/8 Carded 6 per card ...........................................................................6

Weldmark Brushes are manufactured by PFERD/Milwaukee Brush/Archer Tool.

The Weldmark Logo and part number are “branded” on the handles of all scratch brushes!

WM600138WM600212WM600358



62

SPARK LIGHTERS & FLINT RENEWALS

Lighter heads are imprinted with

Weldmark logo.

WM3001 WM3011 WM5011 WM5021WM3021

WM3011X

WM5012X

5 Flints/Pack40 Packs/Box

WM3001X

WM4501

Part# Description Std. Pkg.WM3001 Lighter, single fl int round (10 per box - 10 boxes per case) ....................100WM3001X Renewals, single fl int round (5 per holder - 40 holders per box - 25 boxes per case) ............................25WM3011 Lighter, single fl int round-carded (50 cards per case) ...............................50WM3011X Renewals, single fl int round (5 renewals per card - 50 cards per box - 4 boxes per case) ...................200WM3021 Lighter, single fl int round with 5 renewals-carded (50 cards per case) .....50WM3021X Renewals, single fl int round (10 renewals per card - 50 cards per box - 4 boxes per case) ..................200WM4501 Lighter, three fl int (10 per box - 10 boxes per case) ................................100WM5003X Renewals, three fl int (1 renewal per card - 50 cards per box - 4 boxes per case) .....................200WM5011 Lighter, three fl int-carded (50 cards per case) ...........................................50WM5012X Renewals, three fl int (4 renewals per card - 50 cards per box - 4 boxes per case) ....................200WM5021 Lighter, three fl int with 4 renewals-carded (50 cards per case) .................50

Products on this page are manufactured by G.C. Fuller.



63

TIG TORCHES

Gas Cooled● Durable Brass Head Construction● Silicone Rubber Insulation● 1 pc. (R) or 2 pc. (2) Power Cables Assembly

● Flex-Head available● Built-in Gas Valves available● Wide selection of accessories

HEAD STYLE PART #9-12-2

9-12-R9-25-R9V-12-29V-25-29V-12-R9V-25-R

CABLE LENGTH

25ft 9-25-22 Piece

1 Piece

2 Piece

1 Piece

Rigid Headwith Valve

Rigid Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft9F-12-2

9F-12-R9F-25-R9FV-12-29FV-25-29FV-12-R9FV-25-R

25ft 9F-25-22 Piece

1 Piece

2 Piece

1 Piece

Flex Headwith Valve

Flex Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft

WEM 9 Series Gas Cooled 125 Amps

WEM 9 - 125 Amps● Light duty, versatile● Gas lens accessories available

105Z57 Power Cable Adapter

Flex-Head (F), Valve (V), 1 (R) or 2 pc. (2) Power Cable Assemblies are available.

Flex-Head available


17-12-R17-25-R17V-12-217V-25-217V-12-R17V-25-R

CABLE LENGTH

25ft 17-25-22 Piece

1 Piece

2 Piece

1 Piece


Rigid Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft17F-12-2

17F-12-R17F-25-R17FV-12-217FV-25-217FV-12-R17FV-25-R

25ft 17F-25-22 Piece

1 Piece

2 Piece

1 Piece

Flex Headwith Valve

Flex Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft

WEM 17 - 150 Amps● Medium duty● Gas lens accessories available


105Z57 Power Cable AdapterFlex-Head (F), Valve (V), 1 (R) or 2 pc. (2) Power Cable Assemblies are available.

Flex-Head available



64

TIG TORCHES

● Durable Brass Head Construction● Silicone Rubber Insulation● 1 pc. (R) or 2 pc. (2) Power Cables Assembly


Gas Cooled


24-12-R24-25-R24V-12-224V-25-224V-12-R24V-25-R

CABLE LENGTH

25ft 24-25-22 Piece

1 Piece

2 Piece

1 Piece


Rigid Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft24F-12-2

24F-12-R24F-25-R24FV-12-224FV-25-224FV-12-R24FV-25-R


1 Piece

2 Piece

1 Piece

Flex Headwith Valve

Flex Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft


Flex-Head (F), Valve (V), 1 (R) or 2 pc. (2) Power Cable Assemblies are available.

WEM 24 - 80 Amps● Small head size for intricate work● Gas lens accessories available

53N43 Power Cable Adapter

Flex-Head available


26-12-R26-25-R26V-12-226V-25-226V-12-R26V-25-R

CABLE LENGTH

25ft 26-25-22 Piece

1 Piece

2 Piece

1 Piece


Rigid Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft26F-12-2

26F-12-R26F-25-R26FV-12-226FV-25-226FV-12-R26FV-25-R


1 Piece

2 Piece

1 Piece

Flex Headwith Valve

Flex Headw/o Valve

12½ft

12½ft

12½ft

12½ft

25ft

25ft

25ft

WEM 26 - 200 Amps● Maximum capacity gas cooled● Gas lens accessories available


45V62 Power Cable AdapterFlex-Head (F), Valve (V), 1 (R) or 2 pc. (2) Power Cable Assemblies are available.

Flex-Head available



65

TIG TORCHES

● Exclusive Water Jacket Design for Max Cooling● Silicone Rubber Insulation● Rubber (SuperFlex) Cables available


Water Cooled

HEAD STYLE PART #

18-12

18V-12

18V-25

CABLE LENGTH

25ft 18-253 Piece

3 PieceRigid Headw/ Valve

Rigid Headw/o Valve

12½ft

12½ft

25ft

18F-12

18FV-12

18FV-25

25ft 18F-253 Piece

3 PieceFlex Headw/ Valve

Flex Headw/o Valve

12½ft

12½ft

25ft

WEM 18 Series Water Cooled 350 Amps

WEM 18 - 350 Amps● Heavy duty production● Gas lens accessories available

45V11 Power Cable Adapter Flex-Head (F), Valve (V), Rubber (R) (SuperFlex) Cables are available.

18-12-R

18V-12-R

18V-25-R

18-25-R

18F-12-R

18FV-12-R

18FV-25-R

18F-25-R

RUBBER CABLES #

Largest Water Jacketfor Max Cooling

HEAD STYLE PART #

20-12

20V-12

20V-25

CABLE LENGTH

25ft 20-253 Piece

3 PieceRigid Headw/ Valve

Rigid Headw/o Valve

12½ft

12½ft

25ft

20F-12

20FV-12

20FV-25

25ft 20F-253 Piece

3 PieceFlex Headw/ Valve

Flex Headw/o Valve

12½ft

12½ft

25ft

WEM 20 Series Water Cooled 300 Amps

WEM 20 - 300 Amps●Compact general duty● Gas lens accessories available

45V11 Power Cable Adapter Flex-Head (F), Valve (V), Rubber (R) (SuperFlex) Cables are available.

20-12-R

20V-12-R

20V-25-R

20-25-R

20F-12-R

20FV-12-R

20FV-25-R

20F-25-R

RUBBER CABLES #

Largest Water Jacketfor Max Cooling



66

TIG TORCHES

CUP COLLET BODY COLLET TORCH BACK CAP

ALUMINASTANDARD STANDARD STANDARD13N11 (7)(716”)

13N12 (8)(1/2”)13N13 (10)(5/8”)

13N20 (.020)13N21 (.040)13N22 (1/16)13N23 (3/32)13N24 (1/8)

5988213N25 (.020)13N26 (.040)13N27 (1/16)13N28 (3/32)13N29 (1/8)CERAMIC

13N14 (4)(1/4”)13N15 (5)(5/16”)13N16 (6)(3/8”)

13N17 (7)(716”)13N18 (8)(1/2”)13N19 (10)(5/8”)

CERAMIC - LONG

A796F70 (3)(3/16”)A796F71 (4)(1/4”)

A796F72 (5)(5/16”)A796F7 (6)(3/8”)

LONG41V24

MEDIUM41V35

SHORT41V33

ALUMINA - GAS LENS53N58 (4)(1/4”)53N59 (5)(5/16”)

53N60 (6)(3/8”)53N61 (7)(716”)53N61S (8)(1/2”)

45V41 (.020)45V42 (.040)45V43 (1/16)45V44 (3/32)45V45 (1/8)

See Above See Above

ALUMINA - LARGE DIA. LARGE DIA. LARGE DIA.LARGE DIA.13N20L (.020)

13N21L (3/32)13N22L (3/32)13N23L (3/32)13N24L (1/8)

2GHS57N75 (6)(3/8”)57N74 (8)(1/2”)53N88 (10)(5/8”)

45V0204S (.040)45V116S (1/16)45V64S (3/32)995795S (1/8)

796F70 (3)(3/16”)796F71 (4)(1/4”)

796F72 (5)(5/16”)796F73 (6)(3/8”)

13N08 (4)(1/4”)13N09 (5)(5/16”)13N10 (6)(3/8”)

ALUMINA - LONG

Size Suffix Inches Millimeters

020 .020" .5mm

040 .040" 1.0mm

116 1/16" 1.6mm

332 3/32" 2.4mm

418 1/8" 3.2mm

532 5/32" 4.0mm

TUNGSTEN ELECTRODE CONVERSION CHART

53N89 (11)(11/16”)53N87 (12)(3/4”)

GASKET

54N63-20

GAS LENS STANDARD STANDARD

TORCH HEAD ACCESSORIES 9 and 20 series

CUP COLLET BODY COLLET TORCH BACK CAPGASKET

TORCH HEAD ACCESSORIES 24 series

53N15 (.020)53N16 (.040)53N14 (1/16)24C332 (3/32)

80THS53N17 (.020)53N18 (.040)53N19 (1/16)24CB332 (3/32)

CERAMIC - LONG53N28 (4)(1/4”)

53N62 (.020)53N63 (.040)

8GHS

53N64 (1/16)24GLC332 (3/32)

CERAMIC53N24 (4)(1/4”)53N25 (5)(5/16”)

53N27 (6)(3/8”)

ALUMINAA53N23A53N24 (4)(1/4”)

A53N25 (5)(5/16”) A53N27 (6)(3/8”)

STANDARDSTANDARD STANDARD

GAS LENS GAS LENSGAS LENS

53N26 (6)(3/8”)

ALUMINA - GAS LENS53N58 (4)(1/4”)53N59 (5)(5/16”)

53N60 (6)(3/8”)53N61 (7)(716”)53N61S (8)(1/2”)

45V41 (.020)45V42 (.040)45V43 (1/16)45V44 (3/32)



67

TIG TORCHES

ALUMINA

STANDARD STANDARD STANDARD10N50 (4)(1/4”)10N49 (5)(5/16”)10N48 (6)(3/8”)10N47 (7)(716”)

10N46 (8)(1/2”)10N45 (10)(5/8”)10N44 (12)(3/4”)

10N29 (.020)10N30 (.040)10N31 (1/16)10N32 (3/32)10N28 (1/8)406488 (5/32)

10N21 (.020)10N22 (.040)10N23 (1/16)10N24 (3/32)10N25 (1/8)54N20 (5/32)

300HS

CERAMIC105Z43 (4)(1/4”)105Z42 (5)(5/16”)105Z44 (6)(3/8”)105Z45 (7)(716”)

08N78 (8)(1/2”)08N79 (10)(5/8”)08N80 (12)(3/4”)

CERAMIC - LONG12N03 (4)(1/4”)105Z60 (5)(5/16”)

12N02 (6)(3/8”)105Z61 (7)(716”)

ALUMINA - GAS LENS GAS LENS GAS LENS54N15 (7)(716”)54N14 (8)(1/2”)54N19(11)(11/16”)

See Above 3GHS

CERAMIC - GAS LENS54N35 (4)(1/4”)54N34 (5)(5/16”)54N33 (6)(3/8”)54N32 (7)(716”)54N31 (8)(1/2”)

54N36 (11)(11/16”)3CG12 (12)(3/4”)3CG14 (14)(7/8”)3CG16 (16)(1”)

45V29 (.020)45V24 (.040)45V25 (1/16)45V26 (3/32)45V27 (1/8)45V28 (5/32)

ALUMINA - LARGE DIAMETER57N75 (6)(3/8”)57N74 (8)(1/2”)53N88 (10)(5/8”)53N89 (11)(11/16”)53N87 (12)(3/4”)

45V116 (1/16)45V64 (3/32)995795 (1/8)45V63 (5/32)

See Above 3GHSLD

LONG300L (57Y02)

MEDIUM300M (34015)

SHORT300S (57Y04)

ALUMINA - LONG10N49L (5)(5/16”)10N48L (6)(3/8”)

54N17L (5)(5/16”)54N16L (6)(3/8”)54N15L (7)(716”)54N14L (8)(1/2”)

ALUMINA LONG - GAS LENS

10N47L (7)(716”)

57N75L (6)(3/8”)57N74L (8)(1/2”)53N88L (10)(5/8”)53N87L (12)(3/4”)

57N75XL (6)(3/8”)57N74XL (8)(1/2”)53N88XL (10)(5/8”)53N87XL (12)(3/4”)

ALUMINA LONG- LARGE DIAMETER

ALUMINA EXTRA LONG- LARGE DIAMETER

54N18 (4)(1/4”)54N17 (5)(5/16”)54N16 (6)(3/8”)

OVERALL LENGTH 3”

OVERALL LENGTH 2.75”

OVERALL LENGTH 3.25”

CUP COLLET BODY COLLET TORCH BACK CAPGASKET

TORCH HEAD ACCESSORIES 17, 18 and 26 series

STANDARD

LARGE DIAMETER LARGE DIAMETERSTANDARD

54N63USED WITH 300HS

54N01USED WITH 300HS

Size Suffix Inches Millimeters

020 .020" .5mm

040 .040" 1.0mm

116 1/16" 1.6mm

332 3/32" 2.4mm

418 1/8" 3.2mm

532 5/32" 4.0mm

TUNGSTEN ELECTRODE CONVERSION CHART



68

TIG TORCHES

Kits

Accessory Kits — These handy kits contain the most popular spare part items used with a particular torch model.

Hook-Up Kits — Everything needed to connect the tig torch to the welding machine, water cooling source and gas supply regulator/fl owmeter: supply hoses, fi ttings and power cable adapter (water cooled torches only).

Type Kit Kit Number Torch ModelAccessory Kit AK-1 9, 9V, 9F, 9FVAccessory Kit AK-2 17, 17V, 17F, 17FVAccessory Kit AK-3 18, 18VAccessory Kit AK-4 20Hook-Up Kit HK-1 Water CooledHook-Up Kit HK-2 Air Cooled ValveHook-Up Kit HK-3 Air Cooled

Nylon & Leather Cable CoversThese zippered nylon cable covers hold and protect tig torch hoses and power cable together in a neat, fl exible casing. The zipper will not conduct high-frequency current and is protected from hot material contact by the overlap double-stitched construction. These protective covers will certainly pay for themselves by reducing hose and cable replacement costs.

Leather Cable Covers

Part# Description Std. Pkg.WM893110 Cable Cover 10’ ........... 1WM893122 Cable Cover 22’ ........... 1

Model Nylon TypeDescription — Length

3-10 Cable Cover — 10’3-22 Cable Cover — 22’4-10 Cable Cover — 10’4-22 Cable Cover — 22’



69

TUNGSTEN ELECTRODES

Pure Tungsten WM417040 .040” x 7” Ground

WM417116 1/16” x 7” Ground

WM417332 3/32” x 7” Ground

WM41718 1/8” x 7” Ground

WM417532 5/32” x 7” Ground

2% Thoriated Tungsten WM437040 .040” x 7” Ground

WM437116 1/16” x 7” Ground

WM437332 3/32” x 7” Ground

WM43718 1/8” x 7” Ground

WM437532 5/32” x 7” Ground

1.5% Lanthanated Tungsten WM457040 .040” x 7” Ground

WM457116 1/16” x 7” Ground

WM457332 3/32” x 7” Ground

WM45718 1/8” x 7” Ground

WM457532 5/32” x 7” Ground

All tungsten electrodes are packaged 10 pieces per box.CharacteristicsPure Tungsten (EWP) Color code:GreenThese electrodes are primary used with alternating current (AC) for welding of aluminum and magnesium alloys. With this type of current, the tip of the EWP electrode forms a clean, balled end, which provides good arc stability. Pure tungsten is the least expensive, but it is more prone to contamination of the weld than the other types of tungsten electrodes.

Thoriated Tungsten (EWTh-2) Color code:2% RedThoriated tungsten electrodes were designed for direct current electrode negative (DCEN) or straight polarity applications. They maintain a sharpened tip confi guration during welding which is desirable for the welding of steels, nickel alloys and most alloys other than aluminum and magnesium. Thoriated tungsten electrodes are not normally used with AC welding because it is diffi cult to maintain the balled end (which is necessary with AC welding) without splitting the electrode.

Lanthanated EWLa-1.5) Color code:GoldThese electrodes can be used as a nonradioactive substitute for 2% thoriated tungsten. They will provide very similar performance with minimum amount of adjustment or operating conditions required. These materials are certifi ed to be free of radioactivity.

Other Tungstens AvailableZirconiated Tungsten (EWZr-1) Color code:BrownThese electrodes have characteristics that fall between pure and thoriated electrodes. They are normally the electrode of choice for AC welding of aluminum and magnesium alloys because they combine the desirable arc stability characteristics and balled end typical of pure tungsten along with the higher current capacity and better arc starting characteristics of thoriated tungsten electrodes.

Ceriated Tungsten (EWCe-2) Color code:Orange

These electrodes are characterized by ease of starting, good arc stability, long life, high current capacity and lack of radioactivity. Ceriated electrodes will operate successfully with AC or DC.

WMT1592C Tungsten

1/16” x 7” 2% Thoriated (3) Carded

WMT1593C Tungsten

3/32” x 7” 2% Thoriated (3) Carded

WMT1594C Tungsten 1/8” x 7” 2% Thoriated (3) Carded

WMT1582C Tungsten 1/16” x 7” Pure (3) Carded



AWS Classifi cationWeldmark® tungsten electrodes are manufactured to the high level of quality defi ned by the American Welding Society. ANSI/AWS Specifi cations (A5.12)

AWS Class

Color Code

Min. Wt.% Tungsten

Type Wt.% Wt.% other Elements

EWP Green 99.5 (pureW) — 0.5

EWTh-1 Yellow 98.3 thoria 0.8-1.2 0.5

EWTh-2 Red 97.3 thoria 1.7-2.2 0.5

EWXr-1 Brown 99.1 zirconia 0.15-0.4 0.5

EWCe-2 Orange 97.3 ceria 1.8-2.2 0.5

EWLa-1.5 Gold 97.8 lanthana 1.3-1.7 0.5

2% Ceriated Tungsten WM477040 .040” x 7” Ground

WM477116 1/16” x 7” Ground

WM47718 1/8” x 7” Ground

WM477332 3/32” x 7” Ground

WM477532 5/32” x 7” Ground



70

WATER RECIRCULATOR

Tig Torch Cooling System

Part# Description Std PkWEM TIGER-115 Water Recirculator, 2 Gal 115 VAC Bench Type ...................................1(230 VAC model also available - Special order)

· Plastic Water tank eliminates coolant contamination due to electrolysis or chemical reactions.· All units are plumbed with copper tubing and reinforced hose.· New extended life pump features a direct drive power system reducing maintenance and vibration.· No external plumbing is required because of closed loop water system.· Self Priming Pump· Easy Change Pump· Strong rigid construction designed to support power unit.· Compact Design

Specifi cations

· Factory set at 50 psi · 2 gallon reservoir · 115 vac / single phase- 50/60 hz (230 vac also available) · 3.2/ 1.5 amp: 60 hz · 10,000 BTU · Dimensions: 12”L x 14”W x 9”H · 1/4” Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting · 8 foot power cord · Visible water level through tank · Thermal overload · Net weight: 30 lbs. / 13.6 kg · Foam packed for UPS shipment

Tech Sheet & Parts List/Diagram included with unit.

The TIG-er Cooling System is designed for TIG & MIG torches up to 250 amps.



71

WELDING BLANKETS

Weldmark® 28 oz. GoldenglassFiberglass material is coated on one side with neoprene which adds strength and durability, the other side has an acrylic coating. Withstands continuous exposure to 400° F, excursion up to 1,000°F. Acrylic side should be directed to heat source.

Reinforced hanging holes

Velvet Shield Padand Blanket

• Soft, fl exible lightweight carbon fi ber fabric that stands up to heat, fl ame, molten metal and the harshest conditions.

• Continuous operating temperature to 1800 F, Intermittent to 3000 F.

• Provides protection from direct contact with weld spatter. Tough, tear resistant and easy to clean.

• Meets and exceeds all standards of NFPA 701. Developed by NASA technologies and is fi re and heat resistant.The softest

and toughest welding

protection ever— up to

3000° F! Part Number DescriptionWM831618 Velvet Shield Protective Pad 18”x18” 16 oz

(No Grommets)WM831656 Velvet Shield Blanket 5’ x 6’ 16 oz (No Grommets)

Part Number DescriptionWM870066 6X6WM870068 6X8



72

WIRE - ER70S6 WIRESilicon-manganese copper-coated automatic welding wire for CO2 and mixed gas arc welding. Use for welding of unalloyed and low-alloy structural steel, pressure vessel steel and shipbuilding steel with minimum tensile strength.

02311 03011 03533

Note: Typical certifi cations are available from your Weldmark supplier.

Part# Description Std. Pkg.02311 .023 ER70S6 Mild Steel, Copper Coated, 11 lb Plastic Spool * ................................................................ 11 lbs.0232 .023 ER70S6 Mild Steel, Copper Coated, 2 lb Plastic Spools Packaged in 32 lb bulk Cartons ................ 32 lbs.02333 .023 ER70S6 Mild Steel, Copper Coated, 33 lb Plastic Spool * ................................................................ 33 lbs.03011 .030 ER70S6 Mild Steel, Copper Coated, 11 lb Plastic Spool * ................................................................ 11 lbs.0302 .030 ER70S6 Mild Steel, Copper Coated, 2 lb Plastic Spool Packaged in 32 lb Bulk Cartons ................. 32 lbs.03033 .030 ER70S6 Mild Steel, Copper Coated, 33 lb Plastic Spool * ................................................................ 33 lbs.03511 .035 ER70S6 Mild Steel, Copper Coated, 11 lb Plastic Spool * ................................................................ 11 lbs.0352 .035 ER70S6 Mild Steel, Copper Coated, 2 lb Plastic Spool Packaged in 32 lb Bulk Cartons ................. 32 lbs.03533 .035 ER70S6 Mild Steel, Copper Coated, 33 lb Plastic Spool * ................................................................ 33 lbs.03560 .035 ER70S6 Mild Steel, Copper Coated, 60 lb Plastic Coil ** ................................................................ 60 lbs.035GB76 .035 ER70S6 Mild Steel, Copper Coated, 500 lb Drum (palletized 2000 lb per pallet) .......................... 500 lbs.04533 .045 ER70S6 Mild Steel, Copper Coated, 33 lb Plastic Spool * ................................................................ 33 lbs.04560 .045 ER70S6 Mild Steel, Copper Coated, 60 lb Plastic Coil ** ................................................................ 60 lbs.045GB74 .045 ER70S6 Mild Steel, Copper Coated, 500 lb Drum (palletized 2000lb per pallet) ........................... 500 lbs.045GB76 .045 ER70S6 Mild Steel, Copper Coated, 500 lb Drum (palletized 2000lb per pallet) “Premium Feed” 500 lbs.WW10204-2DP Cone Assy w/ Inlet Kit & 18ft. conduit .......................................................................................................1 eachWW10204-C 20.4” Cone Only ..........................................................................................................................................1 eachFCBS216 18ft. Standard Flexible Conduit ..................................................................................................................1 eachA-1AK A-1A Inlet Adapter Kit ................................................................................................................................1 eachPlease release in pallet quantities whenever possible (*2,376 lbs per pallet, **2,520 lbs per pallet.)

Call the location nearest you!

IWDC Warehouse Indianapolis, IN 317-562-1483Fresno Oxygen Fresno, CA 559-233-6684Quimby Corporation Portland, OR 503-221-1100United Welding Supply Scotia, NY 518-346-6222

Prepaid from your warehouse!

• Weldmark® ER70S6, with a minimum of 2376 lbs. (1 pallet) or more, will be shipped prepaid. Release this wire in “full pallet” increments, whenever possible. (Caution: Standard pallets of ER70S6 wire in drums is approximately 2000 lbs. - you will need to add more wire weight to get prepaid)

• Orders for 2,375 lbs. or less will not be shipped prepaid. They will be shipped “freight collect.”

• See pricing in the current IWDC Warehouse Price Catalog or you can view it on the weldmark.com web site.

Full container loads available with special terms dating - see www.weldmark.com (Grytgol Bruks) or call IWDC at 317-562-1483 for more information.



73

The American Cap Co., Inc.

· Full enclosure for Regulator Access Slot.· Meets DOT requirements - passes existing drop test standards.· Cap Anti-Theft feature for maximum cap security.· SNAP CAP includes padlock and key.· Locking feature provides unauthorized valve accessibility and theft and allows for controlled gas usage.

· E-Z open and E-Z close with or without regulator attached.· Cap and mounting bracket are designed for strength and rough in-fi eld usage.· Replacement locks are available.· Safety Yellow color.

Part# Description Std. Pkg.SC2-CNNP Snap Cap 6-1/2” - 3-1/2” 11 UN Low Pressure Course, Yellow ..................................... 1SC2-FNNP Snap Cap 6-1/2” - 3-1/2” 11 UN Low Pressure Fine, Yellow ......................................... 1SC8-CNNP Snap Cap 6-1/2” - 3-1/8” 11 UN High Pressure Course, Yellow ..................................... 1SC8-FNNP Snap Cap 6-1/2” - 3-1/8” 11 UN High Pressure Fine, Yellow ......................................... 1

SafetyIn a Snap!!!

Part# Description Std. Pkg.AWS S240-10-0300 Hawk Singles Shade 10 Ad Helmet .............1



74

Wrenches and PliersThe quality of Channellock tools refl ects a tradition of dedication to excellence maintained for well over a century. They are proud of the men and women who carry on this tradition and thus give substance to their pledge...FOR YOU WHO WANT THE BEST.

Tools are “Clamshell” packaged to hang in your showroom. (Except 808 and 812 wrenches.)

440Tounge/Groove Pliers

369Hi Leverage Electricians Pliers

348Linemans Pliers

326Long Nose Sidecutter Pliers

Part# Description Std. Pkg.317 Pliers, 7-1/2” Long Nose Sidecutter ....................................................................................................................................... 5326 Pliers, 6” Long Nose Sidecutter .............................................................................................................................................. 5337 Pliers, 7” Diagonal Cutting ..................................................................................................................................................... 5348 Pliers, 8-1/2” Linemans .......................................................................................................................................................... 5357 Pliers, 7” Nipper End Cutter ................................................................................................................................................... 5369 Pliers, 9” Electricians Hi Leverage ......................................................................................................................................... 5420 Pliers, 9-1/2” Tongue/Groove ................................................................................................................................................. 5426 Pliers, 6-1/2” Tongue/Groove ................................................................................................................................................. 5430 Pliers, 10” Tongue/Groove ...................................................................................................................................................... 5436 Pliers, 6” Box Joint Cutting .................................................................................................................................................... 5440 Pliers, 12” Tongue/Groove ...................................................................................................................................................... 5460 Pliers, 16” Tongue/Groove ...................................................................................................................................................... 2526 Pliers, 6” Slip Joint Wire Cutting ............................................................................................................................................ 5808 Wrench, 8” Adjustable Chrome .............................................................................................................................................. 5810 Wrench, 10” Adjustable Chrome ............................................................................................................................................ 5812 Wrench, 12” Adjustable Chrome ............................................................................................................................................ 5908 Pliers, 8 1/4” Wiring ............................................................................................................................................................... 5909 Pliers, Crimping Tool .............................................................................................................................................................. 5GL10 Pliers, 9-1/2” Tongue/Groove Griplock .................................................................................................................................. 5GL12 Pliers, 12” Tongue/Groove Griplock ...................................................................................................................................... 5GL6 Pliers, 6-1/2” Tongue/Groove Griplock .................................................................................................................................. 5



75

See acknowledgement order fax from IWDC Customer Service for pricing.Part# Description Std. Pkg.1-Whip Cable, Ultra-Flex “Whip” #1 x 250 ft Reel Orange .. 250’2-Whip Cable, Ultra-Flex “Whip” #2 x 250 ft Reel Orange .. 250’#1 Cable, Welding #1 x 500 ft Reel Flex-A-Prene ........ 500’#2 Cable, Welding #2 x 500 ft Reel Flex-A-Prene ........ 500’#4 Cable, Welding #4 x 500 ft Reel Flex-A-Prene ........ 500’#6 Cable, Welding #6 x 500 ft Reel Flex-A-Prene ........ 500’1/0 Cable, Welding 1/0 x 500 ft Reel Flex-A-Prene ....... 500’10/3 Cable, Power 10/3 x 250 ft Reel Flex-A-Prene......... 250’

Part# Description Std. Pkg.10/4 Cable, Power 10/4 x 250 ft Reel Flex-A-Prene ........ 250’2/0 Cable, Welding 2/0 x 500 ft Reel Flex-A-Prene ....... 500’ 3/0 Cable, Welding 3/0 x 500 ft Reel Flex-A-Prene ....... 500’4/0 Cable, Welding 4/0 x 500 ft Reel Flex-A-Prene ....... 500’6/3 Cable, Power 6/3 x 250 ft Reel Flex-A-Prene........... 250’6/4 Cable, Power 6/4 x 250 ft Reel Flex-A-Prene........... 250’8/3 Cable, Power 8/3 x 250 ft Reel Flex-A-Prene........... 250’8/4 Cable, Power 8/4 x 250 ft Reel Flex-A-Prene........... 250’

Are you currently receiving the IWDC monthly newsletter, “The Chronicles”?

A newsletter for Members of the IWDC June/July 2007

In This Issue

Best BuyPage 3

Featured ProductPage 7

Visit our web siteweldmark.com!

Visit our Specialty Gases web site

www.purityplus.com

The 14th annual Sales and Purchasing Convention was held on May 1 through May 3rd in downtown Indianapolis. This year’s event had record sales, hysterical entertainment, and some of the most informative workshops ever. There were over 500 people in attendance and 120 Vendor booths set up.

Many Vendors reported record sales, including your IWDC Warehouse with record show special sales of $750,000. We’ve estimated total show sales to exceed $10 million, with an average savings of 11%-12%.

The workshops grabbed everyone’s attention and focused on different aspects of your businesses. “This year’s workshops were the most informative yet!”, stated one of our Members.

The 2008 Sales and Purchasing Convention will be on May 5th – 8th at the Omni-Severin also located in downtown Indianapolis. We’ll do our best to make next year’s show better than ever.

Don’t miss it!

Recap of the 2007 Sales& Purchasing Convention

IWDC Members, Vendors & Staff mingle during the Opening Reception.

IWDC Members introduce themselves during General Session.

IWDC Members visit Vendor booths during Thursday’s Buying Market.

Don’t miss out on the latest industry news and happenings at the IWDC Co-op! Contact the IWDC offi ce

and make sure that your company is on our mailing list!

Call us at (317) 562-1483or visit

www.weldmark.comto view “The Chronicles”



76

Coolers, Oven, Lens, Cleaners & NDT Products

Crack Check

VH1000V-115The Dynafl ux upright water cooler operates either in a vertical position for welding carts for space savings, or in a horizontal position for conventional applications. The new extended life pump features a direct drive power system reducing maintenance and increasing performance.

OV50 - Rod Oven50 lb capacity for 12”, 14” and 18” (electrodes with adjustable thermostat)

Pro Cool II VANE PUMP

PCIIV-115

Specifi cations • Factory set at 50 psi adjustable to 80 psi • 3 gallon reservoir • 115 or 230 vac / single phase - 50/60 hz • 12,000 BTU • Dimensions: 18”L x 14”W x 9”H • 5/8 LH Std. Inert Gas fi ttings - 1/4”FPT • 8 foot power cord • Visible water level through tank • Thermal overload • Net weight: 37 lbs / 17 kg • Foam packed for UPS shipment

Pro Cool II VANE PUMP (PCIIV-115) • 1.7 gpm at 50 psi • Rebuilt Pump with New Warranty (Part

no. P1103).

Part# Description Std. Pkg.315KIT-S Crack Check Kit, NDT Standard--(Contains 1 can of DNF315-16, PHF315-16 and 2 cans of CNF315-16) .................................................. 1 KitCF315-16 Cleaner, NDT Nuclear, 15.2 oz 12/case ...............................................1 CaseCNF315-16 Cleaner, NDT Standard, 15.2 oz 12/case ..............................................1 CaseCR365-16 Cleaner, Super Solv. 15.1 oz (12/case) ................................................1 CaseCR370-16 Cutting Fluid, All Metal Heavy Duty 12 oz (12/case) ..........................1 CaseCR601-6 Tungsten Holder, 6 per case .................................................................1 CaseDF315-16 Developer, NDT Nuclear, 14.2 oz 12/case ...........................................1 CaseDF927-4x1 Coolant/Anti-Freeze “Defense”, 4 gal./cs (non-dilutable) ...................1 CaseDNF315-16 Developer, NDT Standard, 14.2oz 12/case...........................................1 CaseHTR120-3A Replacement Boots, Spoon Applicator - 6 per pkg. .............................. 1 PkgHTR120-4X1 Heat Tint Solution 4 gal/case ................................................................1 CaseHTR120-6 Heat Tint Solution 16 oz (6/case) .........................................................1 CaseOV50 Rod Oven, 50lb. capacity 115VAC ................................................................1PCIIV-115 Water Recirculator, 3 gal. 115VAC Bench Type ...........................................1PHF315-16 Penetrant, NDT Standard/Nuclear, 9.4oz 12/case ................................1 CaseUVT01 Lens Safety/Cover “Tufcote”, 2x4 -1/4” clear ..........................................100UVT02 Lens Safety/Cover “Tufcote”, 4 -1/2” x 5 - 1/4” clear ................................50VH1000V-115 Water Recirculator, 2 gal. 115VAC Vertical Bench Type ..............................1

Characteristics • Plastic Water Tank eliminates coolant contamination due to electrolyte or chemical reactions. • All units are plumbed with copper tubing and reinforced hose. • New extended life pump features a direct drive power system reducing maintenance and increasing

performance. • No external plumbing is required because of closed loop water system with pressure relief valves as

standard equipment. • Self-Priming Pump

15 Month Limited WarrantyDefense Anti-Freeze and Pump Lubricant(Weldmark® part# WM929) provides year round protection for Dynafl ux water coolers and other closed loop water recircualators. NOTE: Use of automotive anti-freeze compounds voids warranty and shortens pump life.



77

• T-Bevel has a durable POLYCAST Handle

• Recessed hand grip• Low profi le locking nut allows for left or right hand use• Adjustable 9” stainles steel blade• Blade prevents rust and corrosion• Handle includes acrylic vial for level plumb and 45°

work

• 24” x 2” Body, 16” x 1 1/2” tongue, 1/16” thick• Permanently stamped numbers and 1/8”

graduations• Durable protective epoxy fi nish to prevent rust• Model 1110 has inch graduations• Model 1110M has inch/metric graduations

Item # Description Pk Qty10010101110

8”x24” Steel Framing Square12”x24” Steel Framing Square16”x24” Steel Framing Square

1010

6

FRAMING SQUARES COMBINATION SQUARES16” x 24” Steel Tradesman Square

• Use for making acurate 90° & 45° markings, measuring and checking depth• 16” Stainless steel blade

spans wider boards 1/8”, 1/16” graduations• Machined square head• Self-aligning drawbolt, hardened scriber


16” Stainless Combo Square12” Stainless Combo Square

1010

HD Professional 16” Combo Square

• Use for making acurate 90° & 45° markings, measuring and checking depth• 12” steel blade with 1/8”, 1/16”, 1/32” graduations• Hardened scriber• Machine head with full view acrylic vial

Item # Description Pk Qty230220IM

255

12” Professional Combo Square12” Polysteel Combo Square w/metric graduations6” Pocket Combo Square

1010

10

Professional Combination Square

Item # Description Pk Qty130 Polysteel T-Bevel 10

T-BEVELPolysteel™ T-Bevel & Try Square

PROTRACTORS AND RAFTER SQUARES

• Magnetic base and back• Easy reading dial with

adjustable angle pointer• Built-in angle pitch calcula-

tor on back• Durable POLYCAST

construction• Transfer angles to within 1”


361

Large Magnetic Polycast ProtractorSmall Magnetic Polycast Protracotor

10

10

Magnetic Polycast Protractor• Solid, one-piece extrusion

outperforms brittle die casts

• Won’t bend or break• Aluminum construction will not

rust• Finer marked graduations and numbers

for more precise measuring• Thicker edge makes for a safer saw guide• Use for marking and cutting 90° & 45° angles

Item # Description Pk Qty2990 Heavy Duty Rafter Square 12

Heavy Duty Magnum™ Extruded Aluminum Rafter Square

• Solid brass plumb bob with lacquered fi nish to resist corrosion

• Ties easily to any string or line• Extra hardened steel tip included• Used for installing deck posts, support beams,

plumbing, etc.

Item # Description Pk Qty905 5 oz Steel Plumb Bob 10

PLUMB BOBBrass Plumb Bob

• Bold, clear numbers on bright yellow blades

• Rigid blade with protective acrylic coating

• Durable steel belt clip• Dependable slide locks• Inch/metric blade graduations available on neon

orange case 25’ and 30’ lengths• Durable black and yellow rubber boots on Power

Grip Tapes


25’x1” Yellow Power Tape25’x1” Yellow Power Grip Tape30’x1” Yellow Power Grip w/fractional blade

121212

Power & Power Grip Tapes• Lightweight construction minimizes line sag• Unbendable open hooks allow level to slide freely• Pocket clip will guard tool against loss• Use for landscaping, plumbing, masonry work, gut-

ters and sheet metal work• VARI-PITCH™ vial reads from level to 1/2” pitch

in 1/8” increments

Item # Description Pk Qty83-3 Standard Line Level 10

Line Level

POWER TAPES LINE LEVEL



78

Item # Description Pk Qty881-24881-48

24” Magnetic Heavy-Duty Level48” Magnetic Heavy -Duty Level

22

MAGNETIC LEVELS AND NON-MAGNETIC LEVELSMagnetic Heavy-Duty Level 24”, 48”, 78”, 96”

• Magnetic edge holds to ferrous surfaces

• Top reading window• Replaceable acrylic vials• Beveled end plates protect from shock

Item # Description Pk Qty581-24581-36581-48

24” Magnetic Unitek Box Level36” Magnetic Unitek Box Level48” Magnetic Unitek Box Level

222

Magnetic Unitek™ Aluminum Level 18”, 24”, 36”, 48”, 72”

• Solid I-beam frame; machined edges assure accuracy• Replaceable acrylic vials• Top reading window• High visibility orange• Beveled end plates protect from shock

Item # Description Pk Qty580-24 24” Unitek Box Level 2

Unitek™ Aluminum Level 18”, 24”, 36”, 48”, 72”

• Heavy-duty aluminum frame, 9” overall length• Top read window• V-grooved working edge for pipe work• Strong holding magnetic edge frees hands• Vials read plumb, level and 45°

TORPEDO LEVELSHeavy-Duty Magnetic Aluminum Torpedo

Item # Description Pk Qty991-9581-9

9” Heavy Duty Mag. Torpedo9” Unitek Magnetic Torpedo Level

1010

• Gold anodized frame for 24” and 18” levels• Strong magnetic edge holds to ferrous surfaces• Acrylic vials are replaceable• Shock absorbing rubber end plates protect frame• Heavy-duty I-beam frame with top read window



79

Fuller Items

Part# Description Std. Pkg.FUL 710 Lighter, Shoot-A-Lite Carded (10 CD/CS) ............................................................. 1FUL 730 Lighter, Shoot-A-Lite with 5 Renewals Carded (10 CD/CS) .................................. 1 FUL 732X Renewals For Shoot-A-Lite (10 Per Box-50 BX/CS) ............................................. 1

All other G.C. Fuller products are now privated labeled Weldmark.Please see page 62 for these products.

Part# Description Std. Pkg.FRO CS21B106 Masking Tape (CP106) 2” X 60 YD General Purpose Crepe 4.8 Mil 24 RL/CS ............................................... 24FRO CS21E102 Masking Tape Economy (CP102) 2” X 55 YD 5.3 Mil 1 Day Removal ............................................................ 24FRO CS70C595 Duct Tape (PC595) General Purpose 9 Mil 2” X 55 YD 24 RL/CS ................................................................... 24FRO CS70E618 Duct Tape (PC618) Industrial Grade 2” X 55 YD 10 Mil 24 RL/CS .................................................................. 24FRO CS70E629 Duct Tape (PC629) Contractor Grade 2” X 55 YD 11 Mil 24 RL/CS ............................................................... 24FRO CS92V597 Tefl on Seal Tape 1/2” X 520” 100% Virgin Tefl on 4 Mil 1000 RL/CS .......................................................... 1000FRO CS92V601 Tefl on Seal Tape 3/4” X 260” 100% Virgin Tefl on 4 Mil 700 RL/CS ............................................................. 700FRO CS92V602 Tefl on Seal Tape 3/4” X 520” 100% Virgin Tefl on 4 Mil 700 RL/CS .............................................................. 700FRO CS92V604 Tefl on Seal Tape 1” X 260” 100% Virgin Tefl on 4 Mil 250 RL/CS ................................................................. 250FRO CS92V605 Tefl on Seal Tape 1” X 520” 100% Virgin Tefl on 4 Mil 250 RL/CS ................................................................. 250FRO 50020C Carton Seal Tape, Clear 2” X 110 YD ................................................................................................................. 36FRO 50010C Carton Seal Tape, Clear 2” X 55 YD ................................................................................................................... 36FRO D002001 Tape Dispenser (Superior) ..................................................................................................................................... 1FRO 09002-48 Duct Tape, Premium Grade 48 MM X 60 YD .................................................................................................... 24FRO CS91C878 Electrical Tape 3/4” X 60 FT Black (EL760) 100 RL/CS ................................................................................. 100FRO CS92V595 Tefl on Seal Tape 1/2” X 260” 100% Virgin Tefl on 4 Mil 1000 RL/CS .......................................................... 1000

Gordon Sales

Part # Description Std. Pkg.GOR BAND-IT Band-It Brand Headgear Sweatbands Asst. Colors 12/box ..................... 1



80

Files

Part# Description Std. Pkg11001 File, 4” Flat Bastard Cut (SII 73-22700) ................. 1011002 File, 4” Flat Second Cut (SII 73-22750) .................. 1011003 File, 4” Flat Smooth Cut (SII 73-22800) ................. 1011004 File, 6” Flat Bastard Cut (SII 73-22950) ................. 1011005 File, 6” Flat Second Cut (SII 73-23000) .................. 1011006 File, 6” Flat Smooth Cut (SII 73-23050) ................. 1011007 File, 8” Flat Bastard Cut (SII 73-23200) ................. 1011008 File, 8” Flat Second Cut (SII 73-23250) .................. 1011009 File, 8” Flat Smooth Cut (SII 73-23300) ................. 1011010 File, 10” Flat Bastard Cut (73-23400) ..................... 1011011 File, 10” Flat Second Cut (SII 73-23450) ................ 1011012 File, 10” Flat Smooth Cut (SII 73-23500) ............... 1011013 File, 12” Flat Bastard Cut (SII 73-23600) ................. 511014 File, 12” Flat Second Cut (SII 73-23650) .................. 511015 File, 12” Flat Smooth Cut (SII 73-23700) ................. 511016 File, 14” Flat Bastard Cut (SII 73-23800) ................. 511017 File, 14” Flat Second Cut (SII 73-23850) .................. 511018 File, 14” Flat Smooth Cut (SII 73-23900) ................. 511020 File, 6” Half Round Bastard Cut (SII 73-31700) ..... 1011021 File, 6” Half Round Second Cut (SII 73-31750) ..... 1011022 File, 6” Half Round Smooth Cut (SII 73-31800) .... 1011023 File, 8” Half Round Bastard Cut (SII 73-31900) ..... 1011024 File, 8” Half Round Second Cut (SII 73-31950) ..... 1011025 File, 8” Half Round Smooth Cut (SII 73-32000) .... 1011026 File, 10” Half Round Bastard Cut (SII 73-32100) ... 1011027 File, 10” Half Round Second Cut (SII 73-32150) ... 1011028 File, 10” Half Round Smooth Cut (SII 73-72200) .. 1011029 File, 12” Half Round Bastard Cut (SII 73-32300) ..... 511030 File, 12” Half Round Second Cut (SII 73-32350) ..... 511031 File, 12” Half Round Smooth Cut (SII 73-32400) .... 511032 File, 14” Half Round Bastard Cut (SII 73-32500) ..... 511150 File, 4” Half Round Bastard Cut (SII 73-31500) ..... 1011151 File, 4” Half Round Second Cut (SII 73-31550) ..... 1011152 File, 4” Half Round Smooth Cut (SII 73-31600) .... 1011155 File, 14” Pipeliner Bastard Cut (SII 73-75606) ......... 519001 File, 6” Mill Tapered Bastard Cut (SII 73-14300) ... 1019004 File, 8” Mill Tapered Bastard Cut (SII 73-14550) ... 1019007 File, 10” Mill Tapered Bastard Cut (SII 73-14750) . 1019010 File, 12” Mill Tapered Bastard Cut (SII 73-14950) . 1019030 File, 4” Mill Tapered Bastard Cut (SII 73-14050) ... 1019031 File, 4” Mill Tapered Second Cut (SII 73-14100) ... 10

Part# Description Std. Pkg73-14050 File, Mill Bastard 4” .........................................12 73-14350 File, Mill Second Cut 6” ...................................12 73-14650 File, Mill Smooth 8” .........................................12 73-14850 File, Mill Smooth 10” .......................................12 73-14950 File, Mill Bastard 12” .........................................6 73-15000 File, Mill Second Cut 12” ...................................6 73-15050 File, Mill Smooth 12” .........................................6 73-16100 File, Mill Bastard 2 Round Edges10” ...............12 73-23500 File, Flat Smooth 10” ........................................12 73-23700 File, Flat Smooth 12” ..........................................6 73-24450 File, Multi-Kut Flat 14” ......................................6 73-25650 File, Long Angle Lathe 14” ................................6 73-31700 File, Half Round Bastard 6” .............................12 73-32000 File, Half Round Smooth 8” .............................12 73-32200 File, Half Round Smooth 10” ...........................12 73-39600 File, Round Bastard 6” .....................................12 73-39900 File, Round Second Cut 8” ...............................12 73-50150 File, Knife Bastard 8” .......................................12 73-52050 File, Three Square Smooth 10” .........................12 73-53150 File, Taper Saw Regular Single Cut 8” .............12 73-53550 File, Taper Saw Slim Single Cut 4” ..................12 73-53700 File, Taper Saw Slim Single Cut 6” ..................12 73-54850 File, Taper Saw Extra Slim Single Cut 5” ........12 73-72290 File, Spot Welder Tip #2290 8” ........................12 73-74031 File, Chain Saw Round 3/16” X 8” ...................12 73-74061 File, Chain Saw Round 7/32” X 8” ...................12 73-75282 File, Veneer Knife Mill Bastard 10” .................12 73-76075 File, MIG Welder Nozzle #6075 4” ...................12 73-99215 Handle, Wood File #110 (For 8” to 12” Files) ..12 84-34050 File, Knife Swiss Pattern #0 Cut8” ...................12



81

International Cryogenics’ Dewars The Dewar Line by International Cryogenics, Inc. consists of 7 models* ranging in size from 5 liters to 50 liters. In response to a strong demand pattern for certain models, IC has joined with IWDC to provide a range of the four most popular models for direct shipment from the IWDC warehouse. These models are the IC-5D, IC-10D, IC-20D and the IC-35D. These models are the small, convenient sizes used most frequently by dermatologists, general practitioners, medical and bio labs and hospitals. The frequently requested accessories are also included in this package arrangement. These accessories include the dipper and liquid withdrawal device. The IC dewars were designed to provide light weight and easy handling, good ergonomics and rugged construction. These cryogenic vessels all have excellent holding times, large opening for easy pouring, attractive colors and styling and they all carry a 5-year warranty.

Part# Description Std. Pkg.IC-5D Dewar, 5 Liter ............................................................................................................................ 1 IC-10D Dewar, 10 Liter .......................................................................................................................... 1IC-20D Dewar, 20 Liter .......................................................................................................................... 1IC-35D Dewar, 35 Liter .......................................................................................................................... 1Dipper Dipper ........................................................................................................................................ 1Insert 10/20 Insert, Necktube 10D/20D ......................................................................................................... 1Insert 5 Insert, Necktube 5D ................................................................................................................... 1WD Device Liquid Withdrawal Device ........................................................................................................ 1

(*IWDC inventories 4 models - shown in above listing.)

IC-20D

IC-10D

IC-5DLiquid

Withdrawal Device Dipper



82

Part# Description Std. Pkg.DRY0005 Battery, 9 Volt Alkaline 1-Pack Per Card ......................1DRY0015 Battery, C Alkaline 2-Pack Per Card .............................1DRY0020 Battery, D Alkaline 2-Pack Per Card .............................1DRY0030 Battery, AA Alkaline 4-Pack Per Card ..........................1DRY0035 Battery, AAA Alkaline 4-Pack Per Card .......................1DRY0070 Battery, AA Alkaline 4-Per Box (24 Per Case) .............1DRY0075 Battery, AAA Alkaline 4-Per Box (24 Per Case) ..........1DRY0080 Battery, C Alkaline 12-Per Box .....................................1DRY0085 Battery, D Alkaline 12-Per Box ....................................1DRY0090 Battery, 9 Volt Alkaline 12-Per Box ..............................1DRY7720 Battery, D Heavy Duty 24-Per Pack .............................1LIG0105 Flashlight, Green Industrial 2 Cell D Type ...................1LIG0205 Flashlight, Green Industrial 2 Cell AA Type .................1LIT0155 Battery, Coin Cell for Hornell Helmets #CR2032 (12-Per Box) .................................................1LIT0146 Battery, Coin Cell for Jackson Nex Gen Helmets (12 cards per box)..........................................................1LIT1913 Batteries, Coin cell for Jackson Nex Gen Helmets (25 per box) .....................................................1

Check It Out!!!We now stock Coin Cell

batteries for Jackson Nex Gen and Hornell Helmets!



83

Part# Description Std. Pkg.4LN Pliers, 4” Locking Long Nose .................................... 54LW Wrench, Locking 1/4” to 9/16” .................................. 54SP Clamp, 4” Locking with Swivel Pads ........................ 54WR Pliers, 4” Locking Curved Jaw with Wire Cutter ...... 55WR Pliers, 5” Locking Curved Jaw with Wire Cutter ...... 56BN Pliers, 6” Locking Bent Nose ..................................... 56LN Pliers, 6” Locking Long Nose .................................... 56R Clamp, 6” Locking with Regular Tips ....................... 56SP Clamp, 6” Locking with Swivel Pads ........................ 57CR Pliers, 7” Locking Curved Jaw .................................. 57LW Wrench, Locking 7/16” to 3/4” .................................. 57R Pliers, 7” Locking Straight Jaw ................................. 57WR Pliers, 7” Locking Curved Jaw with Wire Cutter ...... 58R Clamp, 8” Locking Sheet Metal ................................. 19DR Clamp, 9” Locking with Regular Tips ....................... 59LN Pliers, 9” Locking Long Nose .................................... 59R Clamp, 9” Locking Welding ...................................... 19SP Clamp, 9” Locking with Swivel Pads ........................ 510CR Pliers, 10” Locking Curved Jaw ................................ 510LW Wrench, Locking 5/8” to 1-1/8” ................................ 510R Pliers, 10” Locking Straight Jaw ............................... 510WR Pliers, 10” Locking Curved Jaw with Wire Cutter .... 511R Clamp, 11” Locking with Regular Tips ..................... 511SP Clamp, 11” Locking with Swivel Pads ...................... 512LC Pliers, 12” Locking with extended throat and regular tips ................................................................. 518DR Clamp, 18” Locking with extended throat and regular tips ........................................................... 118R Clamp, 18” Locking with regular tips ........................ 118SP Clamp, 18” Locking with Swivel Pads ...................... 120EXT Chain, Extension 18” for 20R Locking Pliers ........... 120R Clamp, 9” Locking Chain .......................................... 520REP Chain, Replacement 18” for 20R Locking Pliers ....... 124R Clamp, 24” Locking with regular tips ........................ 1

Part# Description Std. Pkg.24SP Clamp, 24” Locking with Swivel Pads ...................... 12078110 Pliers, 10” Groovelock ............................................... 52078112 Pliers, 12” Groovelock ............................................... 52078208 Pliers, 8” Lineman ..................................................... 52078218 Pliers, 8” Longneck .................................................... 52078308 Pliers, Diagonal Cutting ............................................. 52078328 Pliers, 8” Cable Cutting ............................................. 52078408 Pliers, 8” Slip Joint .................................................... 52078608 Wrench, 8” Adjustable Chrome ................................. 52078610 Wrench, 10” Adjustable Chrome ............................... 52078612 Wrench, 12” Adjustable Chrome ............................... 5

Replacement Screws, Springs etc.Part# Description Std. Pkg.40-08 Spring-10R, 10WR, 10CR, 11R, 11SP, 11HD, 20R, 310S, 12LC & 10LW Tools (PET 08) ........................ 17 Screw-10R, 10WR, 10CR, 20R, 24R, 24SP, 310S, 12LC, 11R, 11SP, 11HD, 18R, 18SP tools ................. 108 Spring-10R, 10WR, 10CR, 11R, 11SP, 11HD, 20R, 310S, 12LC and 10LW tools ...................................... 121 Screw, Adjusting for 7R, 7WR, 7CR, 9LN, 8R, 9R, RR and 7LW tools ...................................................... 122 Spring, Replacement for 7R, 7WR, 7CR, 9LN, 8R, 9R, RR and 7LW tools ........................................ 134 Spring, Replacement for 18R, 18SP, 24R and 24SP

tools ............................................................................ 151 Screw, Adjusting for 5WR, 6LN, 6BN, 6R and 6SP

tools ............................................................................ 152 Spring, Replacement for 5WR, 6LN, 6BN, 6R and 6SP tools .............................................................. 191 Screw, Adjusting for 4WR, 4LN, 4SP and 4LW tools ............................................................ 192 Spring, Replacement for 4WR, 4LN, 4SP and 4LW

tools ............................................................................ 1

8R

7CR

18DR

9DR

4WR4LN

12LC



84

Part# Description Std. Pkg.10231 Bit, Step Drill (1/8-1/2) 13 Sizes ........................................................510233 Bit, Step Drill (1/4-3/4) 9 Sizes ..........................................................5

103101

20SR20SL

102

Part# Description Std. Pkg20SL Snips, Offset - Cuts Straight and Angles or Curves Left ..................................................................520SR Snips, Offset - Cuts Straight and Angles or Curves Right ................................................................5101 Snips, Aviation - Cuts Left and Straight ...........................................................................................5102 Snips, Aviation - Cuts Right and Straight .........................................................................................5103 Snips, Aviation - Cuts Straight and Wide Curves .............................................................................5



85

Arc Welding Accessories

*Chipping HammersPart# Description Std. Pkg.LAW-1 Hammer, Chipping with Wooden Handle Chisel & Brush (09080) ................................................ 12LG1 Hammer, Chipping w/Spring Handle Chisel/Cross Chisel (09020) .................................................... 12LG2 Hammer, Chipping w/Spring Handle Chisel/Cross Chisel (09130) .................................................... 12 LH2 Hammer, Chipping w/Spring Handle Chisel/Pick (09140) ................................................................ 12LHC1 Hammer, Chipping w/Spring Handle Cross .......... Chisel/Pick (09030) ............................................ 12LHC2 Hammer, Chipping w/Spring Handle Cross .......... Chisel/Pick (09150) ............................................ 12LHCW-1 Hammer, Chipping w/Wooden Handle Cross ........ Chisel/Pick (09050) ............................................ 12LHRP Handle, Replacement Plastic for chipping hammers (09250) ................................................................ 12LHW1 Hammer, Chipping w/Wooden Handle Chisel/Pick (09040) ................................................................ 12LPHCM Hammer, Chipping w/Plastic Handle Cross Chisel/Pick (09220) ............................................ 12LPHG Hammer, Chipping Plastic Handle Chisel/Cross Chisel (09190) .................................................... 12LPHH Hammer, Chipping w/Plastic Handle Chisel/Pick (09200) ................................................................ 12 LPHHC Hammer, Chipping Plastic Handle Cross Chisel/Pick (09210) ............................................ 12LWB Brush, Replacement For LA1 and LAW1 Chipping Hammers (09330) ............................................... 12LWHCM Hammer, Chipping Hickory Handle “Big Mike” (09120) ................................................................ 12LWHG Hammer, Chipping Hickory Handle Chisel/Cross Chisel (09090) .................................................... 12LWHH Hammer, Chipping Hickory Handle Chisel/Pick (09100) ................................................................ 12

*Chipping Hammers (cont.)Part# Description Std. Pkg.LWHHC Hammer, Chipping Hickory Handle Cross Chisel/Pick (09110) ............................................ 12 Lugs & SplicersPart# Description Std. Pkg.L1 Lug, Welding Cable #2 thru #6 (07000) ........... 100L2 Lug, Welding Cable #4 thru #6 (06995) ........... 100L4 Lug, Welding Cable #6 thru #8 (06990) ........... 100 L6 Lug, Welding Cable #8 thru #10 (06985) ......... 200 L8 Lug, Welding Cable #12 thru #14 (06980) ....... 200 L12 Lug, Welding Cable #1 & #2 (07010) .............. 100L26 Lug, Welding Cable #2 thru #6 (07005) ........... 100L1020 Lug, Welding Cable 1/0 Thru 2/0 (07020) .......... 50L3040 Lug, Welding Cable 3/0 & 4/0 (07030) .............. 25LM2040AI Lug, Mechanical Cable Angle 2/0 thru 4/0 Insulated (07100) .................................................. 1LM2040S Lug, Mechanical Cable Straight 2/0 thru 4/0 (07070) .................................................................. 1LM2040SI Lug, Mechanical Cable Straight 2/0 thru 4/0 Insulated (07110) .................................................. 1LM610AI Lug, Mechanical Cable Angle #6 thru 1/0 Insulated (07080) .................................................. 1LM610S Lug, Mechanical Cable Straight #6 thru 1/0 (07050) .................................................................. 1LM610SI Lug, Mechanical Cable Straight #6 thru 1/0 (07090) .................................................................. 1CS2040 Splicer, Cable 350 amp single oval point screw 2/0 Thru 4/0 ................................................................ 1CS610 Splicer, Cable 250 amp single oval point screw #6 Thru 1/0 ................................................................ 1S1020 Splicer, Welding Cable 1/0 & 2/0 (06120) ........... 1S12 Splicer, Welding Cable #1 & #2 (06110) .............. 1S3040 Splicer, Welding Cable 3/0 & 4/0 (06130) ........... 1

*Models LA1 and LH1 are on page 8 - Private labeled “Weldmark”.



86


Part# Description Std. Pkg.LEN LRO-10-120 Rod Oven 10 LB 120 VAC 01910 ..................................................................................................................1LEN LRO-50-120 Rod Oven 50 LB 120 VAC 01950 ..................................................................................................................1

Model LRO-10-120 LRO-50-120Voltage - Single Phase 120 60/50 hz 120 60/50 hz

Replacement Heating Element 01926 01966

Capacity 10 lbs. (5.9 kgs) 50 lbs. (22.8 kgs)

Size Electrode Handled 10” (25.4 cm) thru 18” (45.7 cm) 10” (25.4 cm) thru 18” (45.7 cm)

Sealed Heating Element 100 Watts 150 Watts

Wiring 10’ Heavy Duty Cord 10’ Heavy Duty Cord

Pilot Light Yes Yes

Temp Range 300° F (150° C) Avg. 300° F (150° C) Avg.

Thermostat None - Constant Input None - Constant Input

Insulation 1” Glass Fibre Batt 1” Glass Fibre Batt

Chamber Size 3-1/8” Dia. (7.9 cm) x 19” (48 cm) 7-1/2” Dia. (19 cm) x 19” (48 cm)

Exterior Dimensions 8” Dia. (20 cm) x 24” (62 cm) 13” Dia. (33 cm) x 22” (56 cm)

Net Weight 15 lbs. (6.8 kgs) 22 lbs. (10 kgs)

Shipping Dimensions 8” (20 cm) x 8” (20 cm) x 26” (66 cm) 13” (33 cm) x 13” (33 cm) x 26” (66 cm)

Shipping Weight 16 lbs. (7 kgs) 23 lbs. (10 kgs)

LRO-50-120

LRO-10-120



87


Circle BurnersPart# Description Std. Pkg.CB20 Circle Burner 18” (03010) ................................1CB20M Circle Burner 18” with Magnetic Base (03011) .............................................................1CB30 Circle Burner 30” (03020) ................................1CB30M Circle Burner 30” with Magnetic Base (03021) .............................................................1CBM2030 Magnetic base for CB20 & CB30 (03030) .......1

Parts & Miscellaneous ItemsPart# Description Std. Pkg.01325 Insulator, Tip w/Screw for AF/M/MHT style 1-250 series ..............................................101335 Insulator, Tip w/Screw for AF/HT 3/35/50 & M/MHT-300/350/500 .......................................1LWLP-4 Wire Feed Pads, Treated 4-Pak with clip (01113) ..............................................................1

*Ground Clamps & HoldersPart# Description Std. Pkg.C Clamp, Ground Rotary 500 amp (02080) .........1DURO 250-I Electrode Holder, 250 amp (016250) ...............1G Clamp, Ground 600 amp w/2 dual oval point screws (02060) ........................................1MIG300 Clamp, Mig Ground 300 Amp 1/0 & 2/0 (02075) .............................................................1MIG600 Clamp, Mig Ground 600 Amp 3/0 & 4/0 (02070) .............................................................1

Connectors, Adaptors & PlugsPart# Description Std. Pkg.CT10FA Connector Terminal, Angle for LC10 Male (08010) .............................................................1CT40FA Connector Terminal, Angle for LC40 or C40HD Males (08030) .................................1CT40FS Connector Terminal, Straight for LC40 or C40HD Males (08040) .................................1

*Connectors, Adaptors & PlugsPart# Description Std. Pkg.LC1040 Connector, Whip Size Up to 1/0 (05070) .........1LC10-Red Connector, Calbe (Set) #4 thru 1/0 Red (05041) .............................................................1

*Connectors, Adaptors & PlugsPart# Description Std. Pkg.LC10M-Red Connector, Cable Male Half #4 thru 1/0 Red (05044) ......................................................1LC10MP-Black Plug, Machine #4 thru 1/0 black for Miller machines (05080) .............................................1LC10MP-Red Plug, Machine #4 thru 1/0 red for Miller machines (05081) .............................................1LC40-Red Connector, Cable (Set) 1/0 & 2/0 Red (05051) ............................................................1LC40-Blue Connector, Cable (Set) 1/0 & 2/0 Blue (05551) .............................................................1LC40-Yellow Connector, Cable (Set) 1/0 & 2/0 Yellow (05052) ............................................................1LC40M-Red Connector, Cable Male Half 1/0 & 2/0 Red (05054) .............................................................1LC40M-Yellow Connector, Cable Male Half 1/0 & 2/0 Yellow (05055) .................................................1LDA-Black Adaptor, Dinse for LC40 type connectors Black (05330) ...................................................1LDA-Red Adaptor, Dinse for LC40 type connectors Red (05331) ......................................................1LDA-Set Adaptor, Dinse (Set) for LC40 type connectors Red/Blk (05335) .............................1LDC-70-Blk Connector & Plug, Dinse (Set) 1/0 & 2/0 Black (05440) ...................................................1LDC-70Blk-M Connector, Dinse Male Half 1/0 & 2/0 Black (05443) ...................................................1LDP-25M-BLK Plug, Dinse Machine #8 thru #4 Male Half Black (05283) ...................................................1LDP-50M-BLK Plug, Dinse Machine #4 thru 1/0 Male Half Black (05303) ...................................................1LDP-50M-Set Plug, Dinse Machine (Set) #4 thru 1/0 (05309) 1LDP-70M-BLK Plug, Dinse Machine 1/0 & 2/0 Male Half Black (05313) ...................................................1LDT-1820-L Plug, Dinse Tig Machine for HW18 & HW20 Models (05625) ................................................1LDT-917-F Plug, Dinse Tig Machine for HW9 & HW17 Models (05610) 1LDTS-917-F Plug, Dinse Tig Machine (small) For HW9 & HW17 Models (05650).................................1UP10-Black Plug, Machine #4 Thru 1/0 Black (05270) .......1UP10-Red Plug, Machine #4 Thru 1/0 Red (05271) ..........1

*All other products are on page 8 - Private labeld “Weldmark”.



88

Part# Description Std. Pkg.LOK 06100 Lockjaw 6” Curved Jaw Plier ............................................................................................................ 1LOK06200 Lockjaw 7” C Clamp ......................................................................................................................... 1LOK 06201 Lockjaw 7” C Clamp W/ Swivel Pads ............................................................................................... 1LOK 09300 Lockjaw 7” Needle Nose Plier .......................................................................................................... 1LOK 10100 Lockjaw 10” Curved Jaw Plier .......................................................................................................... 1LOK 10200 Lockjaw 11” C Clamp ....................................................................................................................... 1LOK 10201 Lockjaw 11” C Clamp W/ Swivel Pads ............................................................................................. 1LOK 80100 Lockjaw Set 10100 06100 09300 ...................................................................................................... 1LOK 80200 Lockjaw Set 10100 06100 ................................................................................................................ 1LOK 80300 Lockjaw Set 10100 09300 ................................................................................................................. 1



89

Part# Description Std. Pkg.APP BF100 Spectacle Bifocal Magnifying 1.00 Power ....12APP BF125 Spectacle Bifocal Magnifying 1.25 Power ....12APP BF150 Spectacle Bifocal Magnifying 1.50 Power ....12APP BF175 Spectacle Bifocal Magnifying 1.75 Power ....12APP BF200 Spectacle Bifocal Magnifying 2.00 Power ....12APP BF225 Spectacle Bifocal Magnifying 2.25 Power ....12APP BF250 Spectacle Bifocal Magnifying 2.50 Power ....12APP BF275 Spectacle Bifocal Magnifying 2.75 Power ....12APP BF300 Spectacle Bifocal Magnifying 3.00 Power ....12APP CC100 Spectacle Bifocal Contemporary Style 1.00 Power.................................................................. 1APP CC150 Spectacle Bifocal Contemporary Style 1.50 Power.................................................................. 1APP CC200 Spectacle Bifocal Contemporary Style 2.00 Power.................................................................. 1

Part# Description Std. Pkg.APP CC250 Spectacle Bifocal Contemporary Style 2.50 Power.................................................................. 1APP CC300 Spectacle Bifocal Contemporary Style 3.00 Power.................................................................. 1MS100 Magnifying spectacles, Diopter 1.00 .............12MS125 Magnifying spectacles, Diopter 1.25 .............12MS150 Magnifying spectacles, Diopter 1.50 .............12MS175 Magnifying spectacles, Diopter 1.75 .............12MS200 Magnifying spectacles, Diopter 2.00 .............12MS225 Magnifying spectacles, Diopter 2.25 .............12MS250 Magnifying spectacles, Diopter 2.50 .............12MS275 Magnifying spectacles, Diopter 2.75 .............12MS300 Magnifying spectacles, Diopter 3.00 .............12

• Now welders can conform to ANSI Z-87 specifi cations by wearing safety glasses under their welding helmets while at the same time providing the magnifi cation they get with reading glasses or 2 x 4 ¼” magnifying lenses.

• MAG-Safe™ magnifying safety glasses offer a better fi eld of vision because they are closer to the eyes than 2 x 4 ¼” magnifying lenses.

• MAG-Safe™ magnifying safety glasses provide ANSI Z-87 protection not available with reading glasses.

• MAG-Safe™ magnifying safety glasses allow the user to take advantage of the full viewing area of extra large lenses. 2 x 4 ¼” magnifying lenses block off part of the extra large lens viewing area.

• MAG-Safe™ magnifying safety glasses are available in powers 1.00, 1.25, 1.50, 1.75, 2.00, 2.25, 2.50, 2.75, and 3.00.



90

Part# Description Std. Pkg.APP C2AFA Glasses, Safety Amber Asst. Frame Colors .......................12APP C2AFC Glasses, Safety Clear Asst. Frame Colors .........................12APP C2AFS Glasses, Safety Smoke ASST Frame Colors .....................12APP EXPOC Glasses, Safety Polycarbonate ............................................1APP EXPOV Glasses, Photochromatic Safety with Pouch .......................1APP HF125 Glasses, Reading 1.25 Mag .................................................1APP HF150 Glasses, Reading 1.50 Mag .................................................1APP HF175 Glasses, Reading 1.75 Mag .................................................1APP HF200 Glasses, Reading 2.00 Mag .................................................1APP HF225 Glasses, Reading 2.25 Mag .................................................1APP HF250 Glasses, Reading 2.50 Ma ...................................................1APP HF275 Glasses, Reading 2.75 Mag .................................................1APP HF300 Glasses, Reading 3.00 Mag .................................................1APP IR003 Glasses, Infrared Safety Shade 3 .........................................1APP IR005 Glasses, Infrared Safety Shade 5 .........................................1APP LNDNC Glasses, London Safety Clear No Mag ...............................1APP LNDNS Glasses, London Safety Smoke No Mag............................1APP TF150 Glasses, Top Bifocal Safety 1.50 Mag ................................1APP TF200 Glasses, Top Bifocal Safety 2.00 Mag ................................1APP TF250 Glasses, Top Bifocal Safety 2.50 Mag ................................1APP CS150 Glasses, Bifocal Safety Smoked Lens 1.50 Mag ................1APP CS200 Glasses, Bifocal Safety Smoked Lens 2.00 Mag ................1APP CS250 Glasses, Bifocal Safety Smoked Lens 2.50 Mag ................1

APP C2AFA

APP CS150

APP EXPOC

APP HF175

APP IR003 & APP IR005

APP LNDNC & APP LNDNS

APP TF150

APP EXPOV

“Exclusive”“Exclusive”



91

Spatter-Spatter, is a top performing, safe, water-based anti-spatter that is used by leading manufacturers to smooth out material production fl ow, save time and money on clean up, and increase production percentages. It works on virtually any metal, including stainless steel and aluminum and has built-in rust inhibitors.

MB 10-A POP Display Unit

The new SPATTER SPATTER Display Unit takes advantage of the time-tested and proven method to increase sales...POP! This point-of-purchase display acts as a silent salesman to help you sell product.

Features• Compact Design.• Quick and Easy setup.• 4 Trays/12 cans each.• Clear Shrink Wrap on each tray.• Trays easily restocked.• Complete Unit is shipped

assembled in an overpack.• Can be shipped UPS.• Inexpensive, durable, attractive

display. White lined corrugated construction.

• Order Stock #:MB10-DSP• The display is FREE! You only

pay for the Spatter-Spatter.

Part# Description Std. Pkg.10A Anti-Spatter, “Spatter-Spatter” Air Powered 12 oz (12 per case) .................................................................... 1 case10ACD Anti-Spatter Counter Display, “Spatter-Spatter” 12 ea, 12 oz. ...................................................................1 Display10G Anti-Spatter, “Spatter-Spatter” 1 gallon Jug (4 per case) ................................................................................. 1 case10Q Anti-Spatter, “Spatter-Spatter” 32 oz. Bottle (6 per case) ................................................................................ 1 case16D Nozzle Dip, “Spatter-Dip” 16 oz. Jar (12 per case) ......................................................................................... 1 case5G Anti-Spatter, “Spatter-Spatter” 5 gallon Pail .................................................................................................... 1 eachDS-14 Anti-Spatter “D-Spat” 14 oz CO2 powered aerosol can (12 per case) ............................................................ 1 case10Q-EB Bottle Only, Replacement “Spatter-Spatter” 32 oz. ......................................................................................... 1 each10Q-Sprayer Sprayer Head Only for “Spatter-Spatter” ......................................................................................................... 1 eachM-10DSP Anti-Spatter Display, “Spatter-Spatter” 48 each 12 oz cans ............................................................................ 1 eachMB100C Coolant, Machine Lubricant “40 to 1 Mix” 1 gallon (4 per case) .................................................................... 1 caseMB100C-5G Coolant, Machine Lubricant “40 to 1 Mix” 5 gallon ....................................................................................... 1 each

5G 10G 16D

10ACD DS-14 MB100C



92

MILLER/HOBART REPLACEMENT PARTS (FOR WELDMARK MACHINES)

For details on how to purchase complete Weldmark® machines, see your IWDC/Miller vendor agreement sheet or contact Joe Bourassa at Miller Electric at 920-735-4576.

Part# Description Std. Pkg.195 957 H10 Replacement MIG Torch for .030 - .035 in (0.8 - 0.9 mm) wire. Includes 10’ cable ..................................1407 230-001 .023/.025 in (0.6 mm) and .030/.035 in (0.8/0.9 mm) Drive Roll Kits ...............................................................1407 230-004 .023/.025 in (0.6 mm) and .045 in (1.2 mm) Drive Roll Kits ..............................................................................1087 299 .023/.025 in (0.6 mm) Contact Tips .....................................................................................................................1000 067 .030 in (0.8 mm) Contact Tips .............................................................................................................................1000 068 .035 in (0.9 mm) Contact Tips .............................................................................................................................1000 069 .045 in (1.2 mm) Contact Tips .............................................................................................................................1379 304 .030 in (0.8 mm) for use on Hobart “Piecemaker” Model 14A Gun ...................................................................1379 314 .035 in (0.9 mm) for use on Hobart “Piecemaker” Model 14A Gun ...................................................................1379 587 .024 in for use on Hobart “Piecemaker” Model 14A Gun ...................................................................................1194 010 .023/.025 in (0.6 mm) Replacement Liners .........................................................................................................1194 011 .030 - .035 in (0.8 - 0.9 mm) Replacement Liners ..............................................................................................1194 012 .035 - .045 in (0.9 - 1.2 mm) Replacement Liners ..............................................................................................1409 737 003 .035 - .045 in (0.6 - 1.2 mm) for use on Hobart “Piecemaker” Model 14A Gun ................................................1169 715 Nozzle ..................................................................................................................................................................1379 718 Nozzle ..................................................................................................................................................................1169 716 Tip Adapter ..........................................................................................................................................................1177 107H Gas Diffuser for use on Hobart “Piecemaker” Model 14A Gun .........................................................................1379 708 Nozzle Adapter for use on Hobart “Piecemaker” Model 14A Gun ....................................................................1MIL 000067 Contact Tip, MIG .030 (10 per pkg) ................................................................................................................10MIL 000068 Contact Tip, MIG .035 (10 per pkg) ................................................................................................................10MIL 000069 Contact Tip, MIG .045 (10 per pkg) ................................................................................................................10MIL 087299 Contact Tip, MIG .023 (10 per pkg) ................................................................................................................10MIL 169232 O-Rings (3 PER PACK) .....................................................................................................................................1MIL 169715 Nozzle, MIG Slip Type .500 Orifi ce (2 per pkg) ...............................................................................................2MIL 169716 Contact Tip Adaptor, MIG (2 per pkg) ..............................................................................................................2MIL 176655 Electrode (5 PER PACK)....................................................................................................................................1 MIL 176656 Nozzle TIP (5 PER PACK) .................................................................................................................................1MIL 177107H Gas Diffuser Assembly, MIG ............................................................................................................................1 MIL 194010 Liner, MIG .023-.025 Wire ................................................................................................................................1MIL 194011 Liner, MIG .030-.035 Wire ................................................................................................................................1MIL 194012 Liner, MIG .035-.045 Wire ................................................................................................................................1MIL 195957 Gun, MIG H-10 .030-.035 10 ft ........................................................................................................................1MIL 202808 Shield Cup ..........................................................................................................................................................1 MIL 202809 Swirl Ring ...........................................................................................................................................................1 MIL 202925 Feed Roll, MIG .024/.030/.035H V GROOVE .................................................................................................1MIL 203476 Hub For Weldmark 135,175 ...............................................................................................................................1 MIL 203544 Nut, Hub for Weldmark 135,175 ........................................................................................................................1 MIL 227798 Switch, Trigger ..................................................................................................................................................1MIL 379304 Contact Tip, MIG .030H (10 per pkg) .............................................................................................................10MIL 379314 Contact Tip, MIG .035 H/T/AL (10 per pkg) ..............................................................................................10MIL 379587 Contact Tip, MIG .024H (10 per pkg) .............................................................................................................10MIL 379708 Adaptor Nozzle, MIG ......................................................................................................................................1MIL 379718 Nozzle, MIG Slip Type .500 Orifi ce ..................................................................................................................1MIL 407230-004 FEED ROLL, MIG .024 & .045H V GROOVE ............................................................................................1 MIL 409737-003 LINER, MIG .035-.045 WIRE 15 FT ................................................................................................................1



93

2700N95

2600N95 2730N100

2800N95 2740R95HandyStrap® Respirators• HandyStrap, with buckle, allows mask to hang

down around neck when not in use. • Stretch cloth strap feels cool and comfortable

against the skin. • Exclusive Ventex® valve lets the hot air out faster

so workers breathe easier and stay cooler longer. • Soft foam nose fl ange, contoured nose bridge and

Softspun® lining give all-day comfort. • Dura-Mesh® shell resists collapsing in heat and

humidity.

• Basic N95 models are available without (2600N95) or with Ventex valve (2700N95).

• 2800N95 features an added carbon layer for relief from nuisance levels of ozone and organic vapor odors.

• 2740R95 can be used in environments where oils may be present.

• 2730N100 features a full fl ange for added comfort. COMMON APPLICATIONS: N95—Grinding, sanding, sweeping, bagging, stone quarrying, metal machining, soldering, brazing, cement mixing, polishing, poultry and textiles. No oils present. R95—Same environments as N95, where oils may be present. N100—Environments where an OSHA substance specifi c standard applies (lead, cadmium, arsenic, MDA), pharmaceutical manufacturing, welding, torch cutting, metal pouring, battery manufacturing. No oils present. 2850 Respirator Locker®

• Includes four 2800N95 masks. • Approved for N95 with nuisance levels of ozone and organic vapor odors. • Locker stores masks and keeps carbon layer fresh.

EZ-22Respirator

EZ-23Respirator

COMMON APPLICATIONS: For welding stainless, aluminum, galvanized. Arc, Brazing, Cutting.



94

2250/2350 Respirator Locker® • Provides hygienic storage for each worker, keeps masks

clean.

• Allows employer to meter respirator usage.

• Separate compartment permits storage of used masks during breaks, preventing premature disposal of the masks.

• Includes fi ve 2300N95 or 2200N95 masks.

2200N95/2300N95 Particulate RespiratorFor Non-Oil Based Particulates

• Collapse-resistant Dura-Mesh® shell lasts longer so workers use fewer masks.

• Shaped for comfort with contour molded nose bridge and soft, foam nose fl ange.

• Seals easily and comfortably without a metal noseband. • 2200N95 is a basic economy model. • 2300N95 features an exhalation valve to reduce hot-air build-up so it

keeps workers cooler and more comfortable.

COMMON APPLICATIONS: Dusty environments, i.e., grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffi ng, lime, poultry and textiles. Additional 2300N Applications: welding, soldering and brazing.

2200N95

2300N95

2310N99/2315N99 Welding RespiratorsFor Non-Oil Based Particulates

• Higher level of protection—N99.• Dura-Mesh® shell resists collapsing in heat and humidity. • Contour molded nose bridge and soft, foam nose fl ange for comfort. • 2315N99 features adjustable cloth straps for a secure, snug fi t.

COMMON APPLICATIONS: Welding, soldering, brazing and dusty environments where a higher level of protection is required. No oils present.

2315N99

2310N99



95

2400N95/2500N95 Particulate Respirator

For Non-Oil Based Particulates plus Nuisance Ozone/Organic Vapors or Acid Gases

• Added charcoal layer for nuisance levels of ozone/organic vapor odors (2400N95) or acid gases (2500N95).

• Collapse-resistant Dura-Mesh® shell. • Contour molded nose bridge and soft, foam nose fl ange. • Exhale valve for easier breathing.

COMMON APPLICATIONS: OV—Welding and foundry operations, lab settings, agriculture, chemical processing, printing, food processing, paint and varnish manufacturing, waste processing and sewage treatment. AG—Aluminum, copper, zinc, brass, bronze smelting, glass etching, paper mills, breweries, fertilizer production, ceramic and clay processing, and chemical processing.

8111N/8112N/8113N8111KN/8112KN/8113KNPaint Spray/Pesticide Respirator

• Use for oil-free agricultural pesticides & paint sprays.• Soft, durable facepiece has a low profi le for a wide fi eld of vision.

• Cartridges snap in for easy replacement and come with a new inhalation valve with each change.

• Assembled respirator includes: 8000 Series Facepiece, 8100 Organic Vapor Cartridges (one pair), 8910 N95 Filters and 8020 Filter Retainer.

• Bucket Kit (shown left) includes assembled respirator, additional N95 fi lters, foam earplugs (one pair) and Paint Bucket.

COMMON APPLICATIONS: Paint spray, pesticides, degreasing, metal cleaning, adhesives, carpet installation, auto body shops, welding, printing, paint/varnish, mortuary, waste processing, sewerage, under coating, fertilizer.

8941/8942/8943 P100 Respirator

• Use for oil and non-oil based particulates. • Soft, durable facepiece has a low profi le for a wide fi eld of

vision. • Filter disks are lighter than cartridges. • Fewer parts so there is less maintenance. • Assembled respirator includes: 8000 Series Facepiece, P100 fi lter disks and disk/fi lter holders.

COMMON APPLICATIONS: Lead, asbestos, welding, machining, exotic metals, powder coating, dry pesticides, foundries, other highly toxic substances.



96

6644/6645/6844/6845PlugStation®

• Gives workers easy access to hearing protection.

• Affordable enough to be placed virtually anywhere.

• Eliminates messy packaging.

• Chute delivers plugs right into the palm of your hand.

• Available in 250 or 500 Pair with either SparkPlugs® (NRR 30) or Pura-Fit® (NRR 31) plugs.

6400/6405/6415/6420Rockets® Reusable Earplugs

• The easy grip handle allows for easy insertion.

• Air bubble in the tip provides cushioned comfort.

• Earplugs can be washed and reused. • Comes with a Pocket-Pak® carrying case to store

plugs. • Available corded and uncorded. • NRR 26.

6506 Jazz Band®

• Ideal alternative to earmuffs. • Optional breakaway neck

cord allows the Jazz Band to conveniently hang around the neck when not in use.

• NRR 25 rating.

6800/6900 Pura-Fit® Foam Earplugs

• High NRR 31 rating. • Tapered for easy insertion. • Longer length for easy fi tting and

removal. • Bright green color for easy

compliance checks.

6604/6654SparkPlugs® Foam Earplugs

• Multi-colored to put some spark into your hearing protection program.

• Soft, tapered design fi ts comfortably.

• NRR 30 rating.6100/6200/6300M Series EarMuffs

• SoftCoat™ covering on cups helps muffl e transmitted noise. • M1 has a black-chrome, spring-steel head band that won’t twist out of

shape. Folds for easy storage. NRR 29.• M2 has molded grips for easy fi tting and durable plastic headband that

swivels so muff can be worn in three positions. NRR 26. • M3 slots easily into any hard hat and can be locked into standby position

for storage. NRR 24.

M1

M2

M3

MOLDEX SUPPORTTechnical SupportToll Free Technical Assistance at 800/421-0668 ext. 504

Qualitative Fit Test KitsComplete kits for fi t testing all Moldex respirators.

Train the Trainer ProgramTrains designated employees to perform onsite fi t testing.

WebsiteTechnical information about products, product cross references, literature requests.

Respirator Selection GuideHelps to quickly identify appropriate respiratory protection.



97

The IWDC Warehouse has inventory on the generic version of the Resource catalogthat has all

proprietary* vendors.

— Full Color Graphics.

— All Weldmark products included.

— Over 110 Manufacturers represented.

— 179 pages of technical data, charts and reference.

Order Yours Today!

Generic with Proprietary line can be ordered under part # 2005-GCP.The cost is $3.90 per catalog (catalogs are packaged 10 per case).

Generic with out Proprietary lines can be ordered under part # 2005-GC. The cost is $3.90 per catalog (catalogs are packaged 10 per case).

*ESAB, Hypertherm, Koike Aronson, Lincoln, Miller, Thermal Arc, Thermal Dynamics, Alcotec, Stoody.



98

Single Line Welding HosePart# Description Std. Pkg.Grade T7109-251 Hose, Twin Welding 1/4 Bulk Reel Grade “T” ...................8007109-381 Hose, Twin Welding 3/8 Bulk Reel Grade “T” ....................6507109NLA-600 Hose, Twin Welding 5/16 X 50 FT B-B Grade “T” ................57109NLC-150 Hose, Twin Welding 3/16 X 12-1/2FT B-B Grade “T” ..........107109NLC-300 Hose, Twin Welding 3/16 X 25 FT B-B Grade “T” ...............107109NLC-600 Hose, Twin Welding 3/16 X 50 FT B-B Grade “T” .................57109NLF-1200 Hose, Twin Welding 1/4 X 100 FT B-B Grade “T” .................57109NLF-300 Hose, Twin Welding 1/4 X 25 FT B-B Grade “T” ................107109NLF-600 Hose, Twin Welding 1/4 X 50 FT B-B Grade “T” ...................57109NLM-1200 Hose, Twin Welding 3/8 X 100 FT B-B Grade “T” ................57109NLM-300 Hose, Twin Welding 3/8 X 25 FT B-B Grade “T” .................107109NLM-600 Hose, Twin Welding 3/8 X 50 FT B-B Grade “T” ...................5

Grade R7120-19200 Hose, Single Line Red 3/16 Bulk Reel Grade “R” ..............7507120-25200 Hose, Single Line Red 1/4 Bulk Reel Grade “R” ................8007120-38200 Hose, Single Line Red 3/8 Bulk Reel Grade “R” ................6507120KAAC-150 Hose, Single Line Red 3/16 X 12-1/2 FT A-A Grade “R” .....107121-19200 Hose, Single Line GREEN 3/16 Bulk Reel Grade “R” .......7507121-25200 Hose, Single Line GREEN 1/4 Bulk Reel Grade “R” .........8007121-38200 Hose, Single Line GREEN 3/8 Bulk Reel Grade “R” .........6507126-191 Hose, Twin Welding 3/16 Bulk Reel Grade “R” ..................7507126-251 Hose, Twin Welding 1/4 Bulk Reel Grade “R” ....................8007126-311 Hose, Twin Welding 5/16 Bulk Reel Grade “R” ..................7007126-381 Hose, Twin Welding 3/8 Bulk Reel Grade “R” ....................6507126KAAC-300 Hose, Twin Welding 3/16 X 25 FT A-A Grade “R” ..............107126KABC-300 Hose, Twin Welding 3/16 X 25 FT A-B Grade “R” ...............107126NLA-1200 Hose, Twin Welding 5/16 X 100 FTB-B Grade “R” ................57126NLA-300 Hose, Twin Welding 5/16 X 25 FT B-B Grade “R” ...............107126NLA-600 Hose, Twin Welding 5/16 X 50 FT B-B Grade “R” .................57126NLC-1200 Hose, Twin Welding 3/16 X 100 FTB-B Grade “R” ................57126NLC-150 Hose, Twin Welding 3/16 X 12-1/2FT B-B Grade “R” .........107126NLC-300 Hose, Twin Welding 3/16 X 25 FT B-B Grade “R” ...............107126NLC-600 Hose, Twin Welding 3/16 X 50 FT B-B Grade “R” .................57126NLF-1200 Hose, Twin Welding 1/4 X 100 FT B-B Grade “R” .................57126NLF-150 Hose, Twin Welding 1/4 X 12-1/2 FT B-B Grade “R” ..........107126NLF-300 Hose, Twin Welding 1/4 X 25 FT B-B Grade “R” .................107126NLF-600 Hose, Twin Welding 1/4 X 50 FT B-B Grade “R” ...................57126NLM-1200 Hose, Twin Welding 3/8 X 100 FT B-B Grade “R” .................57126NLM-300 Hose, Twin Welding 3/8 X 25 FT B-B Grade “R” .................107126NLM-600 Hose, Twin Welding 3/8 X 50 FT B-B Grade “R” ...................5

Grade RM7110NLC-300 Hose, Twin Welding 3/16 X 25 FT B-B Grade “RM” ...........107110NLF-1200 Hose, Twin Welding 1/4 X 100 FT B-B Grade “RM” .............57110NLF-300 Hose, Twin Welding 1/4 X 25 FT B-B Grade “RM” .............107110NLF-600 Hose, Twin Welding 1/4 X 50 FT B-B Grade “RM” ...............57110NLM-600 Hose, Twin Welding 3/8 X 50 FT B-B Grade “RM” ...............5

Parker welding hose meets or exceeds RMA/CGA (Rubber Manufacturers Association/Compressed Gas Association) specifi cation IP-7-1990. Parker single line and twin welding hose features tube compounds that are non-blooming and wax-free. The tube will not secrete combustible oils, or waxes which may impede the fl ow of gas through the hose assembly. The closely plied textile reinforcement is light weight and fl exible, yet strong enough to provide excellent kink resistance, coupling retention and a 4:1 design factor. Parker welding hose is recommended for portable or production line oxy-fuel welding and cutting applications across many industries.

Parker welding hose is offered in three grades. Parker Grades R & RM are recommended ONLY with acetylene fuel gas. Grade R hose features a non-oil resistant and non-fl ame resistant tube and cover. Grade RM features a non-oil resistant and non-fl ame resistant tube, and an oil resistant and fl ame resistant cover. Grade T is a premium hose recommended with acetylene and most other fuel gases including propane, propylene and MAPP® gas. Grade T features an oil resistant and fl ame resistant tube and cover.

Due to the extreme volatility of gases and the rough environment of many welding applications, selection of an appropriate welding hose is critical. The hose must be compatible with the fuel gas used to avoid hose degradation and eventual failure. SPECIFICALLY, USE GRADES R & RM ONLY WITH ACETYLENE FUEL GAS. Grade T may be used with most fuel gases, including propane. Avoid gouging, dragging or abrading or otherwise damaging the hose cover, which may also lead to premature failure. Do not attempt to repair or re-couple hose assemblies; replace all assemblies which show signs of age or abuse.

When safety is on the line, you can’t afford poor performance. Rely on Parker for all your welding hose needs.

Twin Welding Hose



99

1900C

2250C

Pelican Products

1950 Series

2000C

1930C

Part# Description Std. Pkg1900C Flashlight, Mitylight Laser Spot Assorted Colors Carded .............................................. 121900C-Yellow Flashlight, Mitylight Laser Spot Yellow Carded ............................................................. 121900M Flashlights, Mitylight Laser Spot Asst Colors Merchandiser Display ............................. 11904 Bulb, Replacement Mitylite Carded .................................................................................. 61930C-Black Flashlight, White-LED Carded with Lanyard ................................................................... 11930C-Yellow Flashlight, White-LED Carded with Lanyard ................................................................... 12000C Flashlight, Sabrelite Laser Spot Xenon Black Carded ...................................................... 62000C-Y Flashlight, Sabrelite Laser Spot Xenon Yellow Carded .................................................... 62004 Bulb, Replacement Sabrelite Laser Spot Xenon Carded ................................................... 12200C Flashlight, Versabrite Laser Beam Xenon Hands Free Carded ......................................... 12204 Bulb, Replacement Versabrite Laser Beam Xenon Carded ............................................... 62250C Flashlight, Versabrite Laser Beam Xenon Hands Free Deluxe ......................................... 12400C Flashlight, Stealthlite Laser Spot Xenon Yellow Carded .................................................. 62404 Bulb, Replacement Stealthlite Carded .............................................................................. 61830C-Black Flashlight, Pencil thin LED Black ..................................................................................... 61830C-Yellow Flashlight, Pencil thin LED Yellow ................................................................................... 6

1830C



100

LegendSTD/Twist - Standard twist wireFCBL/Twist - Full cable twisted wireSF/Crimped - Standard face crimped wireWF/Crimped - Wide face crimped wireNF/Crimped - Narrow face crimped wireCBL/Twist - Cable twisted wireDBL/Twist - Double twisted wireCS - Carbon steelSS - Stainless steelAR - Arbor hole

Part# Description Std. Pk.11001 File, 4” Flat Bastard Cut (SII 73-22700) .................1011002 File, 4” Flat Second Cut (SII 73-22750) ..................1011003 File, 4” Flat Smooth Cut (SII 73-22800) .................1011004 File, 6” Flat Bastard Cut (SII 73-22950) .................1011005 File, 6” Flat Second Cut (SII 73-23000) ..................1011006 File, 6” Flat Smooth Cut (SII 73-23050) .................1011007 File, 8” Flat Bastard Cut (SII 73-23200) .................1011008 File, 8” Flat Second Cut (SII 73-23250) ..................1011009 File, 8” Flat Smooth Cut (SII 73-23300) .................1011010 File, 10” Flat Bastard Cut (73-23400) .....................1011011 File, 10” Flat Second Cut (SII 73-23450) ................1011012 File, 10” Flat Smooth Cut (SII 73-23500) ...............1011013 File, 12” Flat Bastard Cut (SII 73-23600) .................511014 File, 12” Flat Second Cut (SII 73-23650) ..................511015 File, 12” Flat Smooth Cut (SII 73-23700) .................511016 File, 14” Flat Bastard Cut (SII 73-23800) .................511017 File, 14” Flat Second Cut (SII 73-23850) ..................511018 File, 14” Flat Smooth Cut (SII 73-23900) .................511020 File, 6” Half Round Bastard Cut (SII 73-31700) .....1011021 File, 6” Half Round Second Cut (SII 73-31750) .....1011022 File, 6” Half Round Smooth Cut (SII 73-31800) .....1011023 File, 8” Half Round Bastard Cut (SII 73-31900) .....1011024 File, 8” Half Round Second Cut (SII 73-31950) .....1011025 File, 8” Half Round Smooth Cut (SII 73-32000) .....1011026 File, 10” Half Round Bastard Cut (SII 73-32100) ...1011027 File, 10” Half Round Second Cut (SII 73-32150) ...1011028 File, 10” Half Round Smooth Cut (SII 73-72200) ...1011029 File, 12” Half Round Bastard Cut (SII 73-32300) .....511030 File, 12” Half Round Second Cut (SII 73-32350) .....511031 File, 12” Half Round Smooth Cut (SII 73-32400) .....511032 File, 14” Half Round Bastard Cut (SII 73-32500) .....511150 File, 4” Half Round Bastard Cut (SII 73-31500) .....1011151 File, 4” Half Round Second Cut (SII 73-31550) .....1011152 File, 4” Half Round Smooth Cut (SII 73-31600) .....1011155 File, 14” Pipeliner Bastard Cut (SII 73-75606) .........519001 File, 6” Mill Tapered Bastard Cut (SII 73-14300) ...1019004 File, 8” Mill Tapered Bastard Cut (SII 73-14550) ...1019007 File, 10” Mill Tapered Bastard Cut (SII 73-14750) .1019010 File, 12” Mill Tapered Bastard Cut (SII 73-14950) .1019030 File, 4” Mill Tapered Bastard Cut (SII 73-14050) ...1019031 File, 4” Mill Tapered Second Cut (SII 73-14100) ...1080039 Brush Wheel 6” NF-Crimped .008 CS 1/2” AR (86026) ..............................................................1080042 Brush Wheel 6” NF-Crimped .014 CS 1/2” AR (86029) .....................................................................1080160 Brush Wheel 8” NF-Crimped .010 CS 5/8” AR (86057) ................................................................2

Part# Description Std. Pk.80368 Brush Wheel 6” NF-Crimped .006 SS 1/2” AR (86168) ................................................................280370 Brush Wheel 6” NF-Crimped .010 SS 1/2” AR (86169) ................................................................280371 Brush Wheel 6” NF-Crimped .012 SS 5/8” AR (86170) ................................................................281115 Brush Wheel 6” SF-Crimped .0118 CS 2” AR (86265) ................................................................181122 Brush Wheel Mono-Bilt STD Face .014 CS 5/8 AH (86272) ................................................................181128 Brush Wheel 8” SF-Crimped .014 CS 2” AR (86278) 181254 Brush Wheel 10” WF-Crimped .014 CS 2” AR (86408) .......................................................................181423P Brush P.O.P. Wheel 6” NF-Crimped.014 CS 5/8-1/2 (88881) ..........................................................581427P Brush P.O.P. Wheel 8” NF-Crimped.014 CS 5/8-1/2 (88885) ..........................................................581457P Brush P.O.P. Wheel 6” WF-Crimped.014 CS 5/8-1/2 (88887) ..........................................................581459P Brush P.O.P. Wheel 7” WF-Crimped.014 CS 5/8-1/2 (88889) ..........................................................581461P Brush P.O.P. Wheel 8” WF-Crimped.014 CS 5/8-1/2 (88891) ..........................................................581518 Brush Wheel 1-1/2” Crimped .014 CS 1/2-3/8 (86558) .....................................................................1081529 Brush Wheel 2” Crimped .0118 CS 1/2-3/8 (86569) 1081545 Brush Wheel 3” Crimped .0118 CS 1/2-3/8 (86585) 1081546 Brush Wheel 3” Crimped .014 CS 1/2-3/8 (86586) .1081586 Brush Wheel 3” Crimped .006 SS 1/2-3/8 (86626) .1081588 Brush Wheel 3” Crimped .010 SS 1/2-3/8 (86628) .1081589 Brush Wheel 3” Crimped .012 SS 1/2-3/8 (86629) .1081651 Brush Wheel 3” STD/Twist .014 CS 3/8” AR (86701) ..............................................................1081657 Brush Wheel 4” STD/Twist .014 CS 3/8 )86707) ....1081657P Brush P.O.P. Wheel 4” STD/Twist Knot .014 CS 1/2-3/8 (88741) ..........................................................581666 Brush Wheel 6” STD/Twist .014 CS 5/8 - 1/2” AR (86716) ..............................................................1081666P Brush P.O.P. Wheel 6” STD/Twist Knot .014 CS 5/8-1/2 (88873) ..........................................................581668 Brush Wheel 6” STD/Twist .023 CS 1/2” AR (86718) ..............................................................1081703 Brush Wheel 8” STD/Twist .014 CS 5/8” AR (86734) ................................................................281704P Brush P.O.P. Wheel 8’ STD/Twist Knot .016 CS 5/8-1/2 (88875) ....................................................581800 Brush Wheel 3” STD/Twist .0118 SS 3/8” AR (81800) ..............................................................1081801 Brush Wheel 3” STD/Twist .014 SS 3/8” AR (86832) ..............................................................1081807 Brush Wheel 4” FCBL/Twist .014 SS 3/8” AR (86838) ..............................................................1082165 Brush Wheel 4” Knot .014 5/8-11 (A73327) ...........1082166 Brush Wheel 4” FCBL/Twist .020 CS 5/8-11 (87033) .....................................................................10



101


Part# Description Std. Pk.82166P Brush P.O.P. Wheel 4” FCBL/Twist .020 CS 5/8-11 (88719) ............................................................582168P Brush P.O.P. Wheel 4” CBL/Twist Knot .020 CS 1/2-13 (88720)......................................................582171 Brush Wheel 4” FCBL/Twist .020 CS 1/2-13 (87040) .....................................................................1082172 Brush Wheel 4” FCBL/Twist .020 CS M10 X 1.25 (87041) ................................................1082172P Brush P.O.P. Wheel 4” CBL/Twist Knot .020 CS M10X1.25 (88721)...............................................582176 Brush Wheel 4” FCBL/Twist .020 CS M14 X 2.0 (82176) ..................................................1082186 Brush Wheel 4” Stringer Bead .020 CS 5/8-11 (87053) ....................................................1082186P Brush P.O.P. Wheel 4” Stringer Bead .020 CS 5/8-11 (88700) ............................................................582187 Brush Wheel 4” Stringer Bead .020 CS 1/2-13 (87054) .........................................................1082187P Brush P.O.P. Wheel 4” Stringer Bead .020 CS 1/2-13 (88701) ...........................................................582189 Brush Wheel 4” Stringer Bead .020 CS M10 X 1.5 (87056) ..................................................1082190 Brush Wheel 4” Stringer Bead .020 CS M10 X 1.25 (87057) ................................................1082190P Brush P.O.P. Wheel 4” Stringer Bead .020 CS M10 X 1.25 (88702) ..................................................582191 Brush Wheel 4” Stringer Bead .020 CS M14 X 2.0 (87058) ..................................................1082195 Brush Wheel 4” Crimped .014 CS 5/8-11 (87062) ....582195P Brush P.O.P. Wheel 4” NF-Crimped.014 CS 5/8-11 (88744) ............................................................582199 Brush Wheel 4” Crimped .014 CS M10 X 1.25 (87066) ..................................................582220 Brush Cup 2-3/4” Knotted .020 CS 5/8-11 (87087) ..582220P Brush P.O.P. Cup 2-3/4” Knot Wire .020 CS 5/8-11 (88756) ............................................................582222P Brush P.O.P. Wheel 4” CBL/Twist Knot .020 CS 5/8-11 (88757) ............................................................582226P Brush P.O.P. Cup 2-3/4” Knot Wire .020 CS M10 X 1.50 (88759) ..................................................582228 Brush Cup 2-3/4” Knotted .020 CS M10 X 1.25 (87095) ..................................................582228P Brush P.O.P. Cup 2-3/4” Knot Wire .020 CS M10 X 1.25 (88758) ..................................................582230 Brush Cup 2-3/4” Knotted .020 CS M14 X 2.0 (87097) ....................................................5

Part# Description Std. Pk. 82232 Brush Cup 3-1/2” Knotted CS .020 5/8-11 (87099) ............................................................182243 Brush Cup 3” Crimped .012 CS 5/8-11 (87110) ........582243P Brush P.O.P. Cup 2-3/4” Crimped .012 CS 5/8-11 (88762) ............................................................582244P Brush P.O.P. Cup 2-3/4” Crimped .012 CS 1/2-13 (88763) ...........................................................582246P Brush P.O.P. Cup 2-3/4” Crimped .012 CS M10 X 1.50 (88765) ..................................................582247P Brush P.O.P. Cup 2-3/4” Crimped .012 CS M10 X 1.25 (88764) ..................................................582248 Brush Cup 3” Crimped .0118 CS M14 X 2.0 (87115) .......................................................................582249 Brush Cup 3-1/2” Crimped CS .014 5/8-11 (87116) .182283 Brush Wheel 4” FCBL/Twist .014 SS 5/8-11 (87145) ..........................................................1082283P Brush P.O.P. Wheel 4” STD/Twist Knot .014 SS 5/8-11 (88742) ............................................................582296 Brush Wheel 4” FCBL/Twist .020 SS 5/8-11 (87161) .....................................................................1082298 Brush Wheel 4” FCBL/Twist .020 SS 1/2-13 (87163) .....................................................................1082302 Brush Wheel 4” FCBL/Twist .020 SS M10 X 1.25 (87169) ................................................1082307 Brush Wheel 4” Stringer Bead .020 SS 5/8-11 (87172) .....................................................................1082307P Brush P.O.P. Wheel 4” Stringer Bead .020 SS 5/8-11 (88706) ............................................................582308 Brush Wheel 4” Stringer Bead .020 SS 1/2-13 (87173) .....................................................................1082311 Brush Wheel 4” Stringer Bead .020 SS M10 X 1.25 (87176) ................................................1082312 Brush Wheel 4” Stringer Bead .020 SS M14 X 2.0 (87177) ..................................................1082313 Brush Wheel 4” Stringer Bead .020 SS 5/8” AR (87178) ..............................................................1082314 Brush Wheel 4” Stringer Bead .020 SS 3/8” AR (87179) ..............................................................1082330 Brush Cup 2-3/4” Knotted .020 SS 5/8-11 (87195) ...582330P Brush P.O.P. Cup 2-3/4” Knot Wire .020 SS 5/8-11 (88774) ............................................................582338P Brush P.O.P. Cup 2-3/4” Knot Wire .020 SS M10 X 1.25 (88776) ..................................................582342 Brush Cup 3-1/2” Knotted SS .020 5/8-11 (87207) ...182353 Brush Cup 3” Crimped .012 SS 5/8-11 (87218) ........582359 Brush Cup 3-1/2” Crimped SS .014 5/8-11 (87224) ..182474 Brush Wheel 5” FCBL/Twist .023 CS 5/8-11 (87336) ..........................................................1082474P Brush P.O.P. Wheel 5” CBL/Twist .023 CS 5/8-11 (88864) ............................................................582477 Brush Wheel 6” FCBL/24 Knot .023 CS 5/8-11 (87339) ..........................................................1082478 Brush Wheel 6” FCBL/30 Knot .023 CS 5/8-11 (87340) ..........................................................10



102

Part# Description Std. Pk. 82476P Brush P.O.P. Wheel 6” FCBL/Twist.023 CS 5/8-11 (88865) ............................................................582483 Brush Wheel 5” Stringer Bead .020 CS 5/8-11 (87345) ..........................................................1082483P Brush P.O.P. Wheel 5” Stringer Bead .020 CS 5/8-11 (88855) ............................................................582487 Brush Wheel 6” Stringer 48 Knot .020 5/8-11 (87349) .....................................................................1082487P Brush P.O.P. Wheel 6” Stringer Bead .020 CS 5/8-11 (88857) ............................................................582494 Brush Wheel 6-7/8” Stringer 56 Knot .020 CS 5/8-11 (87356) ..........................................................1082510 Brush Cup 4” Crimped .014 CS 5/8-11 (87376) ........182510P Brush P.O.P. Cup 4” Crimped .014 CS 5/8-11 (88913) .......................................................................282511 Brush Cup 4” Crimped .020 CS 5/8-11 (87377) ........182515 Brush Cup 5” Crimped .020 CS 5/8-11 (87381) ........182516 Brush Cup 6” Crimped .014 CS 5/8-11 (87382) ........182516P Brush P.O.P. Cup 6” Crimped .014 CS 5/8-11 (88930) .......................................................................282517 Brush Cup 6” Crimped .020 CS 5/8-11 (87383) ........182522 Brush Cup 4” STD/Twist .014 CS 5/8-11 (87388) ....182523 Brush Cup 4” STD/Twist .020 CS 5/8-11 (87389) ....182523P Brush P.O.P. Cup 4” Knot Wire .020 CS 5/8-11 (88910) ............................................................282529 Brush Cup 5” STD/Twist .023 CS 5/8-11 (82529) ....182531 Brush Cup 6” STD/Twist .023 CS 5/8-11 (87397) ....182545 Brush Cup 6” STD/Twist .014 CS 5/8-11 (87411) ....182546P Brush P.O.P.Cup 6” Knot Wire .023 CS 5/8-11 (88926) ............................................................282569 Brush Cup 4” CBL/Twist .035 CS 5/8-11 (87435) ....182572 Brush Cup 6” CBL/Twist .035 CS 5/8-11 (87438) ....182599 Brush Wheel 5” FCBL/Twist .023 SS 5/8-11 (87460) .....................................................................1082603 Brush Wheel 6” FCBL/30 Knot .023 SS 5/8-11 (87464) ..........................................................1082608P Brush P.O.P. Wheel 5” Stringer Bead .020 SS 5/8-11 (88860) ............................................................582612 Brush Wheel 6” Stringer 48 Knot .020 SS 5/8-11 (87473) ..........................................................1082619 Brush Wheel 6-7/8” Stringer 56 Knot .020 SS 5/8-11 (87480) ..........................................................1082648 Brush Cup 4” STD/Twist .020 SS 5/8-11 (87513) .....182823 Brush End 1-3/4” Hollow Center Cup CS .011 1/4” Shank (87716) ..........................................1082823P Brush P.O.P. End 1-1/2” Crimped MTD Cup .012 CS 1/4” Shank (88995) ..............................5

Part# Description Std. Pk.82826P Brush P.O.P. End 2” Crimped MTD Cup .012 CS 1/4” Shank (88996) ..............................582830 Brush End 2-1/2” Hollow Center Cup CS .011 1/4” Shank (87723) ..........................................1082852P Brush P.O.P. End 1-1/2” Crimped Flared Cup .012 CS 1/4” Shank (88990) ..............................582876 Brush Cup Flared Circular End 3” Crimped .006 SS 1/4” Shank (87769).....................................1082877 Brush Cup Flared Circular End 3” Crimped .014 SS 1/4” Shank (87770).....................................1082878 Brush Cup Flared Circular End 2” Crimped .014 CS 1/4” Shank (87748) ....................................1082889 Brush Circular End 1-1/2” Crimped .020 CS 1/4” Shank (87782) ..................................................1082892 Brush Circular End 1-1/2” Crimped .011 CS 1/4” Shank (87785) ..................................................1082897 Brush Circular End 3” Crimped .006 CS 1/4” Shank (87790) ..........................................................1082900 Brush Circular End 3” Crimped .014 CS 1/4” Shank (87793) ..........................................................1082913 Brush Circular End 3” Crimped .014 SS 1/4” Shank (87806) ..........................................................1082916 Brush Wheel 3” STD/Twist .014 CS 1” AR (87809) .....................................................................1082966P Brush P.O.P. End 1/2” Crimped .020 CS 1/4” Shank (88939) ............................................................582967 Brush End 3/4” Crimped .006 CS 1/4” Shank (87857) ..........................................................1082970 Brush End 3/4” Crimped .014 CS 1/4” Shank (87860) ..........................................................1082971 Brush End 3/4” Crimped .020 CS 1/4” Shank (87861) ..........................................................1082972 Brush End 1” Crimped .006 CS 1/4” Shank (87862) .....................................................................1082974 Brush End 1” Crimped .010 CS 1/4” Shank (87864) .....................................................................1082975 Brush End 1” Crimped .014 CS 1/4” Shank (87865) .....................................................................1082976 Brush End 1” Crimped .020 CS 1/4” Shank (87866) .....................................................................1082976P Brush P.O.P. End 1” Crimped .020 CS 1/4” Shank (88954) ............................................................582981 Brush End 1/2” Crimped .006 SS 1/4” Shank (82981) .....................................................................1082986 Brush End 3/4” Crimped .006 SS 1/4” Shank (87876) .....................................................................1082986P Brush P.O.P. End 1” Crimped .010 SS 1/4” Shank (88946) ............................................................582988 Brush End 3/4” Crimped .0104 SS 1/4” Shank (87878) .....................................................................1082991 Brush End 1” Crimped .006 SS 1/4” Shank (87881) .....................................................................1082993 Brush End 1” Crimped .0104 SS 1/4” Shank (87883) .....................................................................10




103

Part# Description Std. Pk.83017 Brush End 1” Variable Trim Crimped .010 CS 1/4” Shank (87907) ..................................................1083056 Brush End 1” COATED Cup VariableTrim .006 SS 1/4” Shank (87946).....................................1083072 Brush End 3/4” Knot Wire .014 CS 1/4” Shank (87962) ..........................................................1083073 Brush End 3/4” Knot Wire .020 CS 1/4” Shank (87963) ..........................................................1083138P Brush End 1” Knot Wire .014 CS 1/4” Shank (87969) .....................................................................1083079P Brush P.O.P. End 1” Knot Wire .014 CS 1/4” Shank (88948) ............................................................583080 Brush End 1” Knot Wire .020 CS 1/4” Shank (87970) .....................................................................1083080P Brush P.O.P. End 1” Knot Wire .020 CS 1/4” Shank (88949) ............................................................583098 Brush End 1” Knot Wire .014 SS 1/4” Shank (87988) .....................................................................1083360 Brush 5/8” POWER TUBE Crimped .005 CS (88150) .....................................................................3683491 Brush Wheel 2” ENCAPSULATED .008 CS 1/2” AR (88275) ..............................................................1083598 Brush Wheel 4” Crimped .010 SS 1/2” AR (88644) .......................................................................183786 Brush M-BRAD Wheel .018/500 S/C (A40317) .....1084632 ADAPTOR Wheel Brush 1” (88644) ........................184639 Knock Out Bushing 1/2” Dia. 3/8” Arbor (88653) ..1084645P Adaptor Metric 5/8-11 TO M10 X 1.25 (88846) .......584647P Adaptor SAE 5/8-11 TO 3/8-24 (88848) ...................584653 Adaptor Shank 1/4” AR X 3/16” Shank (88667) .......584654 Adaptor Shank 3/8” AR X 1/4” Shank (88668) .........584659 Adaptor Shank 1/2” AR X 1/4” Shank (88673) .........585002 Brush Scratch Curved Handle 3 X 19 Rows CS (89002) ...............................................................1285003 Brush Scratch Curved Handle withScraper 3 X 19 Rows CS (89003) .........................................1285004 Brush Scratch Curved Handle 3 X 19 Rows SS (89004) ...............................................................1285006 Brush Scratch Curved Handle 4 X 19 Rows CS (89006) ...............................................................1285008 Brush Scratch Curved Handle 4 X 19 Rows SS (89008) ...............................................................1285033 Brush Scratch Shoe Handle 4 X 16 Rows CS (89036) .....................................................................1285035 Brush Scratch Shoe Handle 4 X 16 Rows SS (89038) .....................................................................12

Part# Description Std. Pk.85055 Brush Scratch Curved Handle ToothBrush 3 X 7 Rows SS (89062) ...........................................3685056 Brush Scratch Curved Handle ToothBrush 3 X 7 Rows Brass (89063) .......................................3685060 Brush Scratch Plastic Handle 3 X 7 Rows SS (A37144).............................................................3685071 Brush Scratch Heavy Block with Scraper 4 X 11 Rows CS (89108) .........................................1285085 Brush Scratch Chipping Hammer REPL. 3 X 15 Rows CS (89107) .........................................1285091 Brush Scratch Flat Wire Block 5 X 10 Rows CS (89109) ...............................................................1285124 Brush Remuv-All 5-1/2” Hot Metal CS (89124) .....1282557 Brush Cup 6” DBL/Twist .023 CS 5/8-11 (87423) ....189253 Brush Floor Black Tampico 24” 2-7/8” Trim (20900) .....................................................................1289397 Brush Counter Duster 8” Grey Horsehair (21362) ..1289553 Brush Plater Shoe Handle Brass Wire 4 Row (20553) .....................................................................1289602 Brush Acid Black Horsehair 3/8” Width (21507) ..14489603 Brush Acid Black Horsehair 1/2” Width (21508) ..14489604 Brush Acid Black Horsehair 5/8’ Width (21509) ...14489626 Brush Tube Fitting Internal 1/4” Nominal (20667) .1289628 Brush Tube Fitting Internal 1/2” Nominal (20669) .1289630 Brush Tube Fitting Internal 3/4” Nominal (20671) .1289698 Brush Chip 2” White Bristle 1-5/8” Trim (21862) ..2489922 Brace Floor Brush Heavy Duty (21735) ....................1




104

Part# Description Std. Pkg.WAR QC1880HC Stretch Film 18” x 1500’ 80 Gauge Quiet Cast.......................... 4

“Quiet Cast” Stretch Wrap Film

BatteriesPart# Description Std. Pkg.AL-AA Batteries, AA Alkaline 8 Pack Shrink Packaged ....12AL-AAA Batteries, AAA Alkaline 8 Pack Shrink Packaged .12AL-C Batteries, C Alkaline 6 Pack Shrink Packaged.......12AL-D Batteries, D Alkaline 6 Pack Shrink Packaged ......12813-2 Batteries, D Alkaline 2-Pack Carded .....................12814-2 Batteries, C Alkaline 2-Pack Carded ......................12815-2 Batteries, AA Alkaline 2-Pack Carded ...................12824-2 Batteries, AAA Alkaline 2-Pack Carded ................126V-HD Battery, 6 Volt Industrial Heavy-Duty Spring Terminals ............................................................... 126V-HDM Battery, 6 Volt Industrial Heavy-Duty Maximum Spring Terminals ....................................................12AL-9V Batteries, 9 Volt Alkaline, 6 Pack Shrink Packaged 72A1604-1 Battery, 9 Volt Alkaline 1 Pack Carded ..................12HD-D Batteries, D Heavy Duty 6 Pack Shrink Packaged 12

BulbsPart# Description Std. Pkg.K2-2 Bulbs, Krypton High Intensity For 2 Cell D (2 per card) .............................................................40

FlashlightsPart# Description Std. Pkg.BR2D-B Flashlight, Black Rubber with 3 Heavy Duty D Batteries....................................................................6IN2 Flashlight, Yellow 2 Cell D Type w/Ring Hanger....6IN2-K Flashlight, Yellow 2 Cell D Type w/Krypton Bulb & Ring Hanger ................................................6IN2-KML Flashlight, Yellow 2 Cell D Type w/Krypton Bulb/Magnet & Ring Hanger ...................................6IN3 Flashlight, Yellow 3 Cell D Type with Ring Hanger ......................................................................6



105

SKM IndustriesPart# Description Std. Pkg.04030 Marker, White Super Met-Al “PumpType” ...................................104031 Marker, Yellow Super Met-Al “Pump Type” ................................11296-1295 Marker, White Super Met-Al .........................................................11296-1323 Marker, Black Super Met-Al .........................................................11296-1324 Marker, Yellow Super Met-Al .......................................................11296-1326 Marker, Red Super Met-Al ............................................................11296-1500 Marker, Blue Super Met-Al ...........................................................11296-1600 Marker, Green Super Met-Al .........................................................11296-1700 Marker, Neon Orange Super Met-Al .............................................11296-1800 Marker, Neon Red Super Met-Al ..................................................11296-1900 Marker, Neon Yellow Super Met-Al..............................................11296-3000 Marker, Nuclear Grade White Super Met-Al ................................11296-3011 Marker, Gold Super Met-Al ..........................................................11296-3012 Marker, Silver Super Met-Al .........................................................1

Part# Description Std. Pkg.YR1-25F Measuring Tape, Rapid-Eighths 1” X 25’ ................6 MY1-25 Measuring Tape, Re-Tape 1” X 25’ ..........................6Y1-25 Measuring Tape, Tru-Lok 1” X 25’ Lime Green ......6Y34-16 Measuring Tape, Tru-Lok 3/4” X 16’ Lime Green ...6Y1-30 Measuring Tape, Tru-Lok 1” X 30’ Neon Orange ....6SK1 Key Caddy, Retractable Belt Clip.............................6SO1R-5 Knife Blades, Heavy Duty Carded (5 each) ..........12SO1Y Utility Knife, Yellow Case .......................................6

AR1-25FControLok™The ultimate in blade control. Heavy-duty blade locks automatically when thumb pressure is released.

CSR1-25

G34-16

SK1Key CaddyHeavy-duty chrome-plated die-cast case with extra long stainless steel chain and large key ring. Returns keys and other articles automatically.

SO1YUtility Knife, Yellow CaseKnife has a rugged die-cast handle that is specially shaped for a comfortable grip. The design alos prevents the blade from pushing up through the handle when applying cut pressure. The spring loaded thumb switch smoothly adjusts the blade to three cutting positions and retracts the blade for safe locking.

Sumner

Part# Description Std. Pkg. SMC ST-871 HI-Jack Pro-Jack “V” Head Stationary, Adjustable 28” - 49” .......1



106

Brass & Stainless Steel Compressed Gas Fittings

Part # Description Std. Pk.3588 Hose Ferrule WE 3588 .....................................504750 Hose Ferrule WE 4750 .....................................50620 Hose Ferrule WE 620 .......................................50624 Hose Ferrule WE 624 .......................................50625 Hose Ferrule WE 625 .......................................50626 Hose Ferrule WE 626 .......................................507322 Hose Ferrule WE 7322 .....................................507323 Hose Ferrule WE 7323 (SAME AS 7324) .......507325 Hose Ferrule WE 7325 .....................................507326 Hose Ferrule WE 7326 .....................................507327 Hose Ferrule WE 7327 .....................................507328 Hose Ferrule WE 7328 .....................................507329 Hose Ferrule WE 7329 .....................................507330B Hose Ferrule WE 7330B ..................................50769 Hose Ferrule WE 769 .......................................509940P Hose Brace WE 9940P .....................................50A102 Adaptor WE 544 ...............................................25A103 Adaptor WE 545 ...............................................25A112 Adaptor WE 540 ...............................................25A113 Adaptor WE 541 ...............................................25A115 Adaptor WE 543 ...............................................25A122 Adaptor WE 537 ...............................................25A162 Adaptor WE 554 ...............................................25A163 Adaptor WE 555 ...............................................25A164 Adaptor WE 556 ...............................................20A188 Adaptor WE 153 .................................................1A192 Adaptor WE 123 .................................................1A193 Adaptor WE 124 .................................................1A243 Adaptor WE 245 ...............................................20A251 Adaptor WE 14 ...................................................1A300 Adaptor WE 103 .................................................1A301 Adaptor WE 104 .................................................1A306 Adaptor WE 105 .................................................1A307 Adaptor WE 106 .................................................1A322 Adaptor WE 107 .................................................1A323 Adaptor WE 108 .................................................1A334 Adaptor WE 253 .................................................1A335 Adaptor WE 254 .................................................1A404 Adaptor, Inert Gas WE AW-15A ......................20A405 Adaptor, Inert Gas WE AW-15 .........................20A414 Adaptor, Inert Gas WE AW-427 .......................10A424 Adaptor, Inert Gas WE AW-407 .........................1A450 Adaptor, Inert Gas WE AW-32 .........................20A462 Adaptor, Inert Gas WE AW-403 .........................1A478 Adaptor, Inert Gas WE AW-405 .........................1A542 Adaptor, Outlet WE B-21 .................................20

Part # Description Std. Pk.A592 Adaptor, Outlet WEB-51 ..................................10A602 Adaptor, Outlet WE B-71 .................................10A603 Adaptor, Outlet WE B-72 .................................10A775 Adaptor, Cyl-Reg WE 322 .................................1A780 Adaptor, Cyl-Reg WE 321 .................................1A781 Adaptor, Cyl-Reg WE 324 .................................1A784 Adaptor, Cyl-Reg WE 314 .................................1A800 Adaptor, Cyl-Reg WE 16 ...................................1A801 Adaptor, Cyl-Reg WE 61 ...................................1A804 Adaptor, Cyl-Reg WE 316 .................................1A809 Adaptor, Cyl-Reg WE 806 .................................1A820 Adaptor, Cyl-Reg WE 808 .................................1A828 Adaptor, Cyl-Reg WE 320 .................................1A830 Adaptor, Cyl-Reg WE 15 ...................................1A831 Adaptor, Cyl-Reg WE 51 ...................................1A832 Adaptor, Cyl-Reg WE 1590 ...............................1A840 Adaptor, Cyl-Reg WE 315 .................................1A842 Adaptor, Cyl-Reg WE 306 .................................1A844 Adaptor, Cyl-Reg WE 319 .................................1A848 Adaptor, Cyl-Reg WE 317 .................................1A850 Adaptor, Cyl-Reg WE 318 .................................1A862 Adaptor, Cyl-Reg WE 416 .................................1A870 Adaptor, Cyl-Reg WE 810 .................................1A876 Adaptor, Cyl-Reg WE 415 .................................1A930 Adaptor, Cyl-Reg WE 827 .................................1A935 Adaptor, Cyl-Reg WE 828 .................................1A948 Adaptor, Cyl-Reg WE 802 .................................1A952 Adaptor, Cyl-Reg WE 809 .................................1B206 Bushing WE B-4-2HP ......................................25B215 Bushing WE B-4HP .........................................25B218 Bushing WE BF-4HP .......................................25B227 Bushing WE BF-6HP .......................................25B231 Bushing WE BF-8-4HP ....................................20B233 Bushing WE BF-8HP .......................................20B239 Bushing WE B-6-4HP ......................................20B241 Bushing WE B-8-4HP ......................................20B26 Bushing WE 134 ..............................................25B27 Bushing WE 135 ..............................................25B28 Bushing WE 32 ................................................50B280 Bushing WE BB-2-4HP ...................................20B282 Bushing WE BB-4-6HP ...................................20B29 Bushing WE 33 ................................................50B294 Bushing WE BA-4-2HP ...................................20B299 Bushing WE BA-8-4HP ...................................20B66 Bushing WE C-32 ............................................20B8 Bushing WE 136 ..............................................25

B218 C10 B282 A780



107

Part # Description Std. Pk.C10 Coupler WE 130 ...............................................25C11 Coupler WE 131 ...............................................25C124 Coupler, Inert WE AW-430B ............................20C126 Coupler, Inert WE AW-430 ..............................25C127 Coupler, Inert WE AW-431 ..............................20C130 Connector WE AW-30 ......................................20C2300 Coupler, Tee WE T-16 ........................................1C2320 Coupler, Tee WE T-CO-2 ...................................1C2346 Coupler, TeeE WE T-346 ....................................1C2510 Coupler, Tee WE T-15 ........................................1C2540 Coupler, Tee WE T-62 ........................................1C2580 Coupler, Tee WE T-92 ........................................1C50 Coupler WE 30 .................................................50C51 Coupler WE 31 .................................................50C80 Coupler Hose WE C-30 ....................................20C81 Coupler Hose WE C-31 ....................................20CN49 Connector WE AW-22 ........................................1CN60 Connector WE AW-53 ........................................1CV128R Check Valve WE CV-30R ..................................1CV129L Check Valve WE CV-31L ...................................1CV20R Check Valve WE CV-7R ....................................1CV21L Check Valve WE CV-8L .....................................1EZ-2000 Kit, Hose Repair “B” Oxygen 1/4” Hose ...........1EZ-2002 Kit, Hose Repair “B” Fuel Gas 1/4” Hose .........1EZ-3000 Kit, Hose Repair “B” Oxygen 3/16” Hose .........1EZ-3001 Kit, Hose Repair “B” Fuel Gas 3/16” Hose .......1EZ-HRK Display, Hose Repair Kit Superior .....................1EZ-S-333 Kit, Hose Repair 3/16” Hose Splicer..................1EZ-S-344 Kit, Hose Repair 1/4” Hose Splicer....................1F6 Filter WE S-3 ....................................................25FA4405 Adaptor WE F-44 .............................................20HC501 Hose Clamp WE 501 ........................................50HTN71 Hand Tight Nut WE 662 .....................................1HTN73P Hand Tight Nut WE 692-P .................................1II Hose Ferrule WE II ..........................................50KK Hose Ferrule WE KK .......................................50KT10 Crimping Tool WE C-1 ......................................1KT15 Crimping Tool WE C-3 ......................................1KT28 Crimping Tool WE C-4,C-5 ...............................1LD-008 Leak Detector WE LT-100 8 oz Bottle ...............1N10 Nut, Hose WE 9 ................................................50N11 Nut, Hose WE 10 ..............................................50N14 Nut, Inert WE AW-21A ....................................25N20 Nut, Hose WE 7 ................................................50N21 Nut, Hose WE 8 ................................................50N2400 Nut, Inert WE AW-14A ....................................50

Part # Description Std. Pk.N2500 Nut, Inert WE AW-14 .......................................50N35 Nut, Hose WE C-8 ............................................20N56 Nut, Reg Inlet WE 16-2 ....................................20N57 Nut, Reg Inlet WE 305-2 ..................................20N60 Nut, Reg Inlet WE 29-2 ....................................20N61 Nut, Reg Inlet WE CO-2 ..................................20N64 Nut, Reg Inlet WE 82 .......................................20N69 Nut, Reg Inlet WE 15-2 ....................................20N70 Nut, Reg Inlet WE 300-2 ..................................20N71 Nut, Reg Inlet WE 62 .......................................20N73 Nut, Reg Inlet WE 92 .......................................20N74 Nut, Reg Inlet WE 93 .......................................20N77 Nut, Reg Inlet WE 604 .....................................20N811A Nut, Adaptor WE 1321-1 ..................................20N82 Nut, Reg Inlet WE 13-2 ....................................20N84 Nut, Reg Inlet WE 14-2 ....................................20N85 Nut, Reg Inlet WE 347-2 ..................................20N854A Nut, Adaptor WE CO-2-1 .................................20N86 Nut, Reg Inlet WE 72 .......................................20N862A Nut, Adaptor WE 416-1 ....................................20NP10 Nipple WE 17,RR-17 .......................................50NP118 Nipple WE 283 .................................................20NP123 Nipple WE 29-3 ................................................20NP126 Nipple WE 16-3 ................................................20NP128 Nipple WE 16-8 ................................................20NP14 Nipple WE 216 .................................................50NP147 Nipple WE CO-3 ..............................................20NP150 Nipple WE CO-4 ..............................................20NP152 Nipple WE CO-7 ..............................................20NP152RF Nipple WE CO-7SF ............................................1NP168 Nipple WE 83 ...................................................20NP169 Nipple WE 87 ...................................................20NP18 Nipple WE 20,RR-20 .......................................50NP188 Nipple WE 15-8 ................................................20NP188CV Nipple WE 15-8CV ............................................1NP189 Nipple WE 15-3 ................................................20NP189RF6 Nipple WE 15-3SF .............................................1NP190 Nipple WE 15-4 ................................................20NP190RF Nipple WE 15-4SF .............................................1NP190W Nipple WE 615-3 ................................................1NP193 Nipple WE 15-9 ................................................20NP193RF Nipple WE 15-9SF .............................................1NP200 Nipple WE 15-7 ..................................................1NP210 Nipple WE 63,73 ..............................................20NP211 Nipple WE 66,76 ..............................................20NP211RF Nipple WE 66-SF, 76-SF ....................................1

Brass & Stainless Steel Compressed Gas Fittings

NP4CV20RN10



108

Part # Description Std. Pk.NP212 Nipple WE 69 ...................................................20NP212RF Nipple WE 69-SF ...............................................1NP216 Nipple WE 67-S,77-S .......................................20NP216RF Nipple WE 67-SF ...............................................1NP221RF Nipple WE 65-SF, 75-SF ....................................1NP236 Nipple WE 603 .................................................20NP4 Nipple WE 19 ...................................................50NP414 Nipple WE 305-3A ...........................................20NP42 Nipple WE 12,RR-12 .......................................25NP435 Nipple WE 300-3 ..............................................20NP46 Nipple WE 11,RR-11........................................50NP595 Nipple WE 22 ...................................................20NP596 Nipple WE RR23, AW-3 ..................................20NP6 Nipple WE 18,RR-18 .......................................50NP605 Nipple WE C-88 ...............................................20NP69 Nipple WE AW-16 ............................................25NP70 Nipple,Inert WE AW-18 ...................................25NP72 Nipple,Inert WE AW-17 ...................................25NP733 Nipple WE 13-3 ................................................20NP74 Nipple WE AW-20 ............................................25NP753 Nipple WE 14-3 ................................................20NP76 Nipple WE AW-19 ............................................25NP765 Nipple WE 347-3 ................................................1OR-580 O-Ring WE 615-0 ..............................................1P2 Plug, NPT WE P-2HP ......................................25P4 Plug, NPT WE P-4HP ......................................25PC4020 Plug & Chain Oxy STD “B” WE 927 ................1PC4021 Plug & Chain Fuel Gas STD “B” WE 928 .........1PC540 Plug & Chain WE CP-540 ..................................1PC580 Plug & Chain WE CP-580 ..................................1PEL4HP Elbow WE BEL-4HP .........................................1PFT-4SS Pipe Tee SS .........................................................1PFT4HP Pipe Tee WE BFT-4HP .......................................1PHT-101 Torch Kit, Air/Propane 500,000 BTU “Superfi re” ..........................................................1PL4HP Pipe Elbow WE BL-4HP ..................................20PL8HP Elbow, 90 Degrees 1/2” NPT WE BL-8HP ........1PTF-34I-24 Pigtail WE PF-4-24,PF2-4-24 ............................1PTF-34I-36 Pigtail WE PF-4-36,PF2-4-36 ............................1PTF-34I-48 Pigtail WE PF-4-48,PF2-4-48 ............................1

Part # Description Std. Pk.PTF-34I-72 Pigtail WE PF-4-72 ............................................1QCR200 Qucik Disconnect WE QDB-30 Regulator Set ..1QCT100 Quick Disconnect WE QDB-10 Torch Set .........1RK16 Hose Repair Kit WE CK-3 .................................1RK35 Repair Kit, Hose 1/4” and 3/16” WE CK-7 .......1RK6 Hose Repair Kit WE CK-1 .................................1S233 Splicer WE 38 ..................................................25S244 Splicer WE 37 ..................................................25S333 Splicer WE 45 ..................................................50S344 Splicer WE 44 ..................................................25S355 Splicer WE 46 ..................................................25S366 Splicer WE 47 ..................................................25S444 Splicer WE 54 ..................................................50S466 Splicer WE 57 ..................................................25S533 Splicer WE 35 ..................................................25S544 Splicer WE 34 ..................................................25T189-3 Tip WE 615-PT ..................................................1T2111 Tip WE 673-KPT,633-KPT ................................1TT001 Tefl on Tape WE MTT-1 ......................................1V332 Valve, Shut Off WE 218-D .................................1V333 Valve, Shut Off WE 211 .....................................1V335 Valve, Shut Off WE 217 .....................................1V52 Valve, Shut Off WE 203 .....................................1V53 Valve, Shut Off WE 204 .....................................1V77 Valve, Shut Off WE 208 .....................................1V81 Valve, Shut Off WE 208-F .................................1V88 Valve, Shut Off WE 205 .....................................1V89 Valve, Shut Off WE 206 .....................................1W18 Washer, Tefl on WE 665 ....................................20W6 Washer WE CO-5 .............................................50W8 Washer WE 335,CO-6 ......................................20Y420 Connector, Y WE 401 .........................................1Y421 Connector, Y WE 402 .........................................1Y50 Connector, Y WE 101 .........................................1Y51 Connector, Y WE 102 .........................................1YV420 Connector, Y W/Valve WE 411 ..........................1YV421 Connector, Y W/Valve WE 412 ..........................1YV50 Connector, Y W/Valve WE 111 ..........................1YV51 Connector, Y W/Valve WE 112 ..........................1

YV50

YV420V88 V454



109

Western Enterprises to Superior Cross Reference NumbersThis cross reference is to aid those who are used to looking up a Western Enterprise #.

You don’t need to use Superior’s part numbers when ordering from the IWDC Warehouse, we can easily convert!WES 10 SUP N11 WES 101 SUP Y50 WES 102 SUP Y51 WES 103 SUP A300 WES 104 SUP A301 WES 105 SUP A306 WES 106 SUP A307 WES 107 SUP A322WES 11 SUP NP46 WES 111 SUP YV50 WES 112 SUP YV51 WES 12 SUP NP42 WES 123 SUP A192 WES 124 SUP A193WES 13-2 SUP N82WES 13-3 SUP NP733WES 130 SUP C10 WES 131 SUP C11 WES 1321-1 SUP N811AWES 134 SUP B26 WES 136 SUP B8WES 14 SUP A251 WES 14-2 SUP N84 WES 14-3 SUP NP753WES 15 SUP A830 WES 15-2 SUP N69 WES 15-3 SUP NP189WES 15-3SF SUP NP189RF6WES 15-3S SUP NP189RWES 15-4 SUP NP190WES 15-4S SUP NP190RWES 15-4SF SUP NP190RFWES 15-7 SUP NP200WES 15-8 SUP NP188WES 15-8CV SUP NP188CVWES 15-9 SUP NP193WES 15-9SF SUP NP193RFWES 153 SUP A188WES 1590 SUP A832WES 16 SUP A800WES 16-2 SUP N56WES 16-3 SUP NP126WES 16-8 SUP NP128WES 17 SUP NP10WES 18 SUP NP6WES 19 SUP NP4

WES 20 SUP NP18WES 203 SUP V52WES 204 SUP V53WES 205 SUP V88WES 206 SUP V89WES 208 SUP V77WES 208-F SUP V81WES 211 SUP V333WES 216 SUP NP14WES 217 SUP V335WES 218-D SUP V332WES 22 SUP NP595WES 245 SUP A243WES 253 SUP A334WES 254 SUP A335WES 283 SUP NP118WES 29-2 SUP N60WES 29-3 SUP NP123WES 30 SUP C50WES 300-2 SUP N70WES 300-3 SUP NP435WES 305-2 SUP N57WES 305-3A SUP NP414WES 306 SUP A842WES 31 SUP C51WES 314 SUP A784WES 315 SUP A840WES 316 SUP A804WES 317 SUP A848WES 318 SUP A850WES 319 SUP A844WES 32 SUP B28WES 320 SUP A828WES 321 SUP A780WES 322 SUP A775WES 324 SUP A781WES 33 SUP B29WES 335 SUP W8WES 34 SUP S544WES 347-2 SUP N85WES 347-3 SUP NP765WES 35 SUP S533WES 3588 SUP 3588WES 37 SUP S244WES 38 SUP S233WES 401 SUP Y420

WES 402 SUP Y421WES 411 SUP YV420WES 412 SUP YV421WES 415 SUP A876WES 416 SUP A862WES 416-1 SUP N862AWES 44 SUP S344WES 45 SUP S333WES 46 SUP S355WES 47 SUP S366WES 4750 SUP 4750 WES 501 SUP HC501WES 51 SUP A831WES 537 SUP A122WES 54 SUP S444WES 540 SUP A112WES 541 SUP A113WES 543 SUP A115WES 544 SUP A102WES 554 SUP A162WES 555 SUP A163WES 556 SUP A164WES 56 SUP S455WES 57 SUP S466WES 603 SUP NP236WES 604 SUP N77WES 61 SUP A801WES 615-0 SUP OR-11WES 615-3 SUP NP190WWES 615-P SUP T189-3WES 62 SUP N71 WES 620 SUP 620WES 624 SUP 624WES 625 SUP 625 WES 626 SUP 626 WES 63 SUP NP210WES 63-S SUP NP210RWES 633-KPT SUP T2111 WES 65-SF SUP NP221RFWES 66 SUP NP211WES 66-SF SUP NP211RFWES 665 SUP W18WES 67 SUP NP216WES 67-SF SUP NP216RFWES 673-KPT SUP T2111WES 69 SUP NP212



110

Western Enterprises to Superior Cross Reference NumbersThis cross reference is to aid those who are used to looking up a Western Enterprise #.

You don’t need to use Superior’s part numbers when ordering from the IWDC Warehouse, we can easily convert!WES 69-S SUP NP212RWES 69-SF SUP NP212RFWES 692-P SUP HTN73PWES 7 SUP N20WES 72 SUP N86WES 73 SUP NP210WES 7322 SUP 7322WES 7323 SUP 7323WES 7325 SUP 7325WES 7326 SUP 7326 WES 7327 SUP 7327WES 7328 SUP 7328WES 7329 SUP 7329WES 7330B SUP 7330BWES 75-SF SUP NP221RFWES 76 SUP NP211WES 76-SF SUP NP211RFWES 769 SUP 769WES 8 SUP N21 WES 802 SUP A948WES 806 SUP A809WES 808 SUP A820WES 809 SUP A952WES 810 SUP A870WES 82 SUP N64WES 827 SUP A930WES 828 SUP A935WES 83 SUP NP168WES 87 SUP NP169WES 9 SUP N10 WES 92 SUP N73WES 927 SUP PC4020WES 928 SUP PC4021WES 93 SUP N74 WES 9940P SUP 9940P WES AW-14 SUP N2500WES AW-14A SUP N2400WES AW-15 SUP A405WES AW-15A SUP A404WES AW-16 SUP NP69WES AW-17 SUP NP72WES AW-18 SUP NP70 WES AW-19 SUP NP76WES AW-20 SUP NP74 WES AW-21A SUP N14WES AW-22 SUP CN49

WES AW-3 SUP NP596WES AW-30 SUP C130WES AW-32 SUP A450WES AW-403 SUP A462WES AW-405 SUP A478WES AW-407 SUP A424WES AW-427 SUP A414WES AW-430 SUP C126WES AW-430B SUP C124WES AW-431 SUP C127WES AW-53 SUP CN60 WES B-21 SUP A542WES BA-4-2HP SUP B294WES BA-8-4HP SUP B299WES B-4HP SUP B215WES B-4-2HP SUP B206WES B-6-4HP SUP B239WES B-71 SUP A602WES B-72 SUP A603WES B-8-4HP SUP B241WES BB-2-4HP SUP B280WES BB-4-6HP SUP B282WES BEL-4HP SUP PEL4HPWES BF-4HP SUP B218WES BF-6HP SUP B227WES BF-8HP SUP B233WES BF-8-4HP SUP B231WES BFT-4HP SUP PFT4HPWES BFT-4SS SUP PFT4SSWES BL-4HP SUP PL4HPWES BL-8HP SUP PL8HPWES C-1 SUP KT10WES C-3 SUP KT15WES C-30 SUP C80WES C-31 SUP C81WES C-32 SUP B66WES C-4,C-5 SUP KT28WES C-8 SUP N35WES C-88 SUP NP605WES CO-2 SUP N61WES C0-3 SUP NP147WES CK-1 SUP RK6WES CK-24 SUP WM24WES CK-26 SUP WM26WES CK-3 SUP RK16WES CK-4 SUP WM27

WES CK-5 SUP WM27WES CK-7 SUP RK35WES CO-2-1 SUP N854AWES CO-4 SUP NP150WES CO-5 SUP W6WES CO-6 SUP W8WES CO-7 SUP NP152WES CO-7SF SUP NP152RFWES CP-540 SUP PC540 WES CP-580 SUP PC580 WES CV-30R SUP CV128RWES CV-31L SUP CV129LWES CV-7R SUP CV20RWES CV-8L SUP CV21LWES F-44 SUP FA4405WES II SUP IIWES KK SUP KKWES LT-100 SUP LD-008WES MTT-1 SUP TT-001WES P-2HP SUP P2WES P-4HP SUP P4WES PF-4-24 SUP PTF-34I-24WES PF-4-36 SUP PTF-34I-36WES PF-4-48 SUP PTF-34I-48WES PF-4-72 SUP PTF-34I-72WES PF2-4-24 SUP PTF-34I-24WES PF2-4-36 SUP PTF-34I-36WES PF2-4-48 SUP PTF-34I-48WES RR-23 SUP NP596WES WB101/102 SUP PHT-101WES QDB-10 SUP QCT100WES QDB-30 SUP QCR200WES RR-11 SUP NP46WES RR-12 SUP NP42WES RR-17 SUP NP10WES RR-18 SUP NP6WES RR-20 SUP NP18WES S-3 SUP F6 WES T-15 SUP C2510WES T-16 SUP C2300WES T-62 SUP C2540WES T-92 SUP C2580WES T-346 SUP C2346WES T-CO-2 SUP C2320



111

Anti-Heat Compound and Tempilstick - Temperature Indicators

Tempil’s industrial melting point standards are simple, reliable and guaranteed accurate within 1%. Tem-pilstik technology was developed to meet the demand for measuring surface temperatures during preheat, interpass and postweld heat treatment temperatures. When the

Tempilstik mark melts...the temperature has been reached. Nothing could be sim-pler. Over 100 temperature ratings available between 100°F (38°C) and 2500°F (1371°C). Lot numbered for NIST traceability in accordance with ISO 10012-1. Uses include:Determining surface temperatures during welding and metal fabrication including preheat, interpass, postweld heat treatment, annealing and stress relieving. Determining operating temperatures of bearings, transformers, steam traps, molds, PC board preheaters, motors, electronic components, hydrau-lic systems, commercial irons, hot plates & heat exchangers. Note: Tempilstiks are available to purchase individually or they are packaged in standard boxes of 10. Call customer service at 317-562-1483 for IWDC pricing on all Tempil products.

Part# Description Std. Pkg.AHTB Anti-Heat Compound, 12 oz. Tube ..............................1AHQT Anti-Heat Compound, Quart ...1AHGL Anti-Heat Compound, Gallon .1TS0100 Tempilstik 100° F ....................1TS0106 Tempilstik 106° F ....................1TS0109 Tempilstik 109° F ....................1TS0113 Tempilstik 113° F ....................1TS0119 Tempilstik 119° F ....................1TS0125 Tempilstik 125° F ....................1TS0131 Tempilstik 131° F ....................1TS0138 Tempilstik 138° F ....................1TS0144 Tempilstik 144° F ....................1TS0150 Tempilstik 150° F ....................1TS0156 Tempilstik 156° F ....................1TS0163 Tempilstik 163° F ....................1TS0169 Tempilstik 169° F ....................1TS0175 Tempilstik 175° F ....................1TS0182 Tempilstik 182° F ....................1TS0188 Tempilstik 188° F ....................1TS0194 Tempilstik 194° F ....................1TS0200 Tempilstik 200° F ....................1TS0206 Tempilstik 206° F ....................1TS0213 Tempilstik 213° F ....................1TS0219 Tempilstik 219° F ....................1TS0225 Tempilstik 225° F ....................1TS0231 Tempilstik 231° F ....................1TS0238 Tempilstik 238° F ....................1TS0244 Tempilstik 244° F ....................1TS0250 Tempilstik 250° F ....................1TS0256 Tempilstik 256° F ....................1TS0263 Tempilstik 263° F ....................1TS0269 Tempilstik 269° F ....................1

Part# Description Std. Pkg.TS0275 Tempilstik 275° F ....................1TS0282 Tempilstik 282° F ....................1TS0288 Tempilstik 288° F ....................1TS0294 Tempilstik 294° F ....................1TS0300 Tempilstik 300° F ....................1TS0313 Tempilstik 313° F ....................1TS0325 Tempilstik 325° F ....................1TS0338 Tempilstik 338° F ....................1TS0350 Tempilstik 350° F ....................1TS0375 Tempilstik 375° F ....................1TS0388 Tempilstik 388° F ....................1TS0400 Tempilstik 400° F ....................1TS0425 Tempilstik 425° F ....................1TS0438 Tempilstik 438° F ....................1TS0450 Tempilstik 450° F ....................1TS0463 Tempilstik 463° F ....................1TS0475 Tempilstik 475° F ....................1TS0488 Tempilstik 488° F ....................1TS0500 Tempilstik 500° F ....................1TS0525 Tempilstik 525° F ....................1TS0550 Tempilstik 550° F ....................1TS0575 Tempilstik 575° F ....................1TS0600 Tempilstik 600° F ....................1TS0650 Tempilstik 650° F ....................1TS0700 Tempilstik 700° F ....................1TS0750 Tempilstik 750° F ....................1TS0800 Tempilstik 800° F ....................1TS0850 Tempilstik 850° F ....................1TS0900 Tempilstik 900° F ....................1TS0932 Tempilstik 932° F ....................1TS0950 Tempilstik 950° F ....................1TS0977 Tempilstik 977° F ....................1TS1000 Tempilstik 1000° F ..................1

Part# Description Std. Pkg.TS1022 Tempilstik 1022° F ..................1TS1050 Tempilstik 1050° F ................. 1TS1100 Tempilstik 1100° F ................. 1TS1150 Tempilstik 1150° F ................. 1TS1200 Tempilstik 1200° F ................. 1TS1250 Tempilstik 1250° F ................. 1TS1300 Tempilstik 1300° F ................. 1TS1350 Tempilstik 1350° F ................. 1TS1400 Tempilstik 1400° F ................. 1TS1450 Tempilstik 1450° F ................. 1TS1500 Tempilstik 1500° F ................. 1TS1550 Tempilstik 1550° F ................. 1TS1600 Tempilstik 1600° F ................. 1TS1650 Tempilstik 1650° F ................. 1TS1700 Tempilstik 1700° F ................. 1TS1750 Tempilstik 1750° F ................. 1TS1800 Tempilstik 1800° F ................. 1TS1850 Tempilstik 1850° F ................. 1TS1900 Tempilstik 1900° F ................. 1TS1950 Tempilstik 1950° F ................. 1TS2000 Tempilstik 2000° F ................. 1TS2050 Tempilstik 2050° F ................. 1TS2100 Tempilstik 2100° F ................. 1TS2150 Tempilstik 2150° F ................. 1TS2200 Tempilstik 2200° F ................. 1TS2400 Tempilstik 2400° F ................. 1TS2500 Tempilstik 2500° F ................. 1TSTK Tempilstik Test Kit - Twenty,

2 1/2” Tempilstik Temperature Indicators in Vinyl Covered Case w/Temperature Range of 125°F - 800°F .................................. 1

IRT16 Infrared Gun ........................... 1



112

Part# Description Std. Pkg.OCC TN6-CHI Tuff Nougies Chili Peppers One Size Fits All .................................................................................... 1OCC TN6-FLA Tuff Nougies Big Flames One Size Fits All........................................................................................ 1OCC TN6-MOT Tuff Nougies Motorbike One Size Fits All ......................................................................................... 1OCC TN6-WAV Tuff Nougies Wavy Flag One Size Fits All ......................................................................................... 1

™



113

Super-Range II Vanguard Welding and Cutting Outfi t

Part# Description Std. Pkg.0384-0834 Welding/Cutting Outfi t Vanguard Super Range II 510-540 Deluxe ......................... 2

Super-Range Vanguard Welding and Cutting Outfi t

Part# Description Std. Pkg. 0384-0839 Welding/Cutting Outfi t Vanguard Super Range 350-510 Deluxe ............................ 2

Part# Description Std. Pkg.0330-0002 Cutting Tip 1-101 #3 Acetylene ............................................... 250330-0003 Cutting Tip 1-101 #000 Acetylene ............................................ 250330-0004 Cutting Tip 1-101 #00 Acetylene ............................................. 250330-0005 Cutting Tip 1-101 #1 Acetylene ............................................... 250330-0006 Cutting Tip 1-101 #2 Acetylene ............................................... 250330-0007 Cutting Tip 1-101 #4 Acetylene ............................................... 250330-0008 Cutting Tip 1-101 #5 Acetylene ............................................... 250330-0012 Cutting Tip 1-101 #0 Acetylene ............................................... 250330-0013 Cutting Tip 1-101 #7 Acetylene ............................................... 250330-0109 Gouging Tip 1-118 #0 Acetylene ............................................. 250330-0113 Gouging Tip 1-118 #2 Acetylene ............................................. 250330-0114 Gouging Tip 1-118 #4 Acetylene ............................................. 250331-0002 Cutting Tip 3-101 #000 Acetylene ............................................ 250331-0009 Cutting Tip 3-101 #00 Acetylene ............................................. 250331-0013 Cutting Tip 3-101 #0 Acetylene ............................................... 250331-0014 Cutting Tip 3-101 #1 Acetylene ............................................... 250331-0015 Cutting Tip 3-101 #2 Acetylene ............................................... 250331-0016 Cutting Tip 3-101 #3 Acetylene ............................................... 250331-0017 Cutting Tip 3-101 #4 Acetylene ............................................... 250333-0300 Cutting Tip GPN #000 Propane and Natural Gas 2-Piece ....... 250333-0301 Cutting Tip GPN #00 Propane and Natural Gas 2-Piece ......... 250333-0303 Cutting Tip GPN #1 Propane and Natural Gas 2-Piece ........... 250333-0304 Cutting Tip GPN #2 Propane and Natural Gas 2-Piece ........... 250333-0306 Cutting Tip GPN #4 Propane and Natural Gas 2-Piece ........... 25

Cutting Tips



114

Journeyman Vanguard Welding and Cutting Outfi t

Part# Description Std. Pkg.0384-2018 Welding/Cutting Outfi t Vanguard Journeyman 510-540 Deluxe ......... 2

RegulatorsPart# Description Std. Pkg.0781-0004 Regulator, Inert Gas SR250A-580 Medium Duty ..10781-0043 Regulator, Oxygen SR250D-540 Medium Duty ....10781-0044 Regulator, Inert Gas SR250D-580 Medium Duty ..10781-0087 Regulator, Acetylene SR260A-510 Medium Duty 10781-0527 Regulator, Oxygen SR450D-540 Heavy Duty .......10781-0528 Regulator, Inert Gas SR450D-580 Heavy Duty .....10781-0584 Regulator, Acetylene SR460A-510 Heavy Duty ....10781-1450 Regulator, Inert Gas SR4J-680 High Pressure .......1

0781-0527

Nozzles

Part# Description Std. Pkg.0323-0112 Welding Nozzle W #0 Acetylene .....................10323-0120 Welding Nozzle W #1 Acetylene .....................10323-0121 Welding Nozzle W #2 Acetylene .....................10323-0122 Welding Nozzle W #3 Acetylene .....................10323-0130 Welding Nozzle W #4 Acetylene .....................10323-0250 Heating Nozzle MFA #4 Acetylene .................10323-0252 Heating Nozzle MFA #8 Acetylene .................10323-0260 Heating Nozzle MFA #10 Acetylene ................10323-0261 Heating Nozzle MFA #12 Acetylene ................10323-0262 Heating Nozzle MFA #15 Acetylene ................10323-0310 Welding Nozzle RTE #2 Acetylene .................10324-0070 Welding Nozzle W-1 #0 Acetylene ..................10324-0071 Welding Nozzle W-1 #1 Acetylene ..................1

Part# Description Std. Pkg.0324-0072 Welding Nozzle W-1 #2 Acetylene ..................10324-0075 Welding Nozzle W-1 #5 Acetylene ..................10324-0076 Welding Nozzle W-1 #6 Acetylene ..................10324-0108 Heating Nozzle MFA-1 #2 Acetylene ..............10324-0109 Heating Nozzle MFA-1 #4 Acetylene ..............10324-0110 Heating Nozzle MFA-1 #6 Acetylene ..............10325-0084 Welding Nozzle W-J #1 Acetylene ..................10325-0085 Welding Nozzle W-J #2 Acetylene ..................10325-0086 Welding Nozzle W-J #3 Acetylene ..................10325-0087 Welding Nozzle W-J #4 Acetylene ..................10325-0105 Welding Nozzle MFA-J #3 Acetylene ..............10325-0106 Welding Nozzle MFA-J #6 Acetylene ..............1



115

Part# Description Std. Pkg.0381-0162 Cutting Attachment CA1260 90 Degree ......10381-0418 Cutting Attachment CA1350 90 Degree ......10381-0816 Cutting Attachment CA2460 90 Degree ......10381-0817 Cutting Attachment CA2461 75 Degree ......10381-1480 Cutting Torch ST2600FC 90 Degree 21” .....10381-1641 Cutting Torch ST1000FC 90 Degree 21” .....10382-0032 Torch Handle 100FC ....................................1

Part# Description Std. Pkg.0382-0034 Torch Handle 315FC ....................................10382-0127 Torch Handle J28 .........................................10387-2600 CA270-V Cutting Attachment .......................10387-2650 CA370-V Cutting Attachment .......................10387-2700 WH270FC-V Welding Handle ......................10387-2750 WH36FC Welding Handle (Packaged White Box) ..................................1

Portable Vanguard Welding and Cutting Outfi t(cylinders not included)

Part# Description Std. Pkg. 0384-0935 Welding/Cutting Outfi t Vanguard Portable MC-540 Deluxe (No Cylinders) ........... 2

Torch & Handle Attachments



116

Blue Demon electrodes are packaged in plastic expandable and reusable cartons. Labels are “color coded” by type and size. MSDS, technical, and end user information is included with each carton.

Part# Description Std. Pkg.308L16 1/16-2 E308L-16 1/16, 2 lb. Plastic Carton ............20308L16 1/8-2 E308L-16 1/8, 2 lb. Plastic Carton ..............20308L16 3/32-2 E308L-16 3/32, 2 lb. Plastic Carton ............203000-1/8-2 1/8 x 2 lb. All Position for Dissimilar Steel Use, Electrode ....................................203000-3/32-2 3/32 x 2 lb. All Position for Dissimilar Steel Use, Electrode ....................................206010-1/8-5 E6010 1/8 x 5 lb. Plastic Carton..................506010-3/32-5 E6010 3/32 x 5 lb. Plastic Carton................506010-5/32-5 E6010 5/32 x 5 lb. Plastic Carton................506011-1/8-5 E6011 1/8 x 5 lb. Plastic Carton ..................506011-3/32-5 E6011 3/32 x 5 lb. Plastic Carton ................506011-5/32-5 E6011 5/32 x 5 lb. Plastic Carton ................506013-1/16-1 E6013 1/16 x 1 lb. Plastic Tube ....................46013-1/16-5 E6013 1/16 x 5 lb. Plastic Carton................506013-1/8-5 E6013 1/8 x 5 lb. Plastic Carton..................506013-3/32-5 E6013 3/32 x 5 lb. Plastic Carton................506013-5/32-5 E6013 5/32 x 5 lb. Plastic Carton................506013-5/64-5 E6013 5/64 x 5 lb. Plastic Carton................507014-1/8-5 E7014 1/8 x 5 lb. Plastic Carton..................50

Part# Description Std. Pkg.7014-3/32-5 E7014 3/32 x 5 lb. Plastic Carton................507014-5/32-5 E7014 5/32 x 5 lb. Plastic Carton................507018-1/8-5 E7018 1/8 x 5 lb. Plastic Carton..................507018-3/32-5 E7018 3/32 x 5 lb. Plastic Carton................507018-5/32-5 E7018 5/32 x 5 lb. Plastic Carton................507018AC-1/8-5 E7018AC 1/8 x 5 lb. Plastic Carton ............507018AC-3/32-5 E7018AC 3/32 x 5 lb. Plastic Carton ..........507024-1/8-5 E7024 1/8 x 5 lb. Plastic Carton..................507024-3/32-5 E7024 3/32 x 5 lb. Plastic Carton................507024-5/32-5 E7024 5/32 x 5 lb. Plastic Carton................50E4043-1/8-2 E4043 1/8 2 lb. Plastic Carton.....................20E4043-3/32-2 E4043 3/32 2 lb. Plastic Carton...................20E4043-5/32-2 E4043 5/32 2 lb. Plastic Carton...................20NI55-1/8-2 ENI55 1/8 2 lb. Plastic Carton ....................20NI55-3/32-2 ENI55 3/32 2 lb. Plastic Carton ..................20NI55-5/32-2 ENI55 5/32 2 lb. Plastic Carton ..................20NI99-1/8-2 ENI99 1/8 2 lb. Plastic Carton ....................20NI99-3/32-2 ENI99 3/32 2 lb. Plastic Carton ..................20NI99-5/32-2 ENI99 5/32 2 lb. Plastic Carton ..................20

Electrodes



117

Blue Demon Tig and Gas Rods are packaged in clear plastic, reusable tubes. Labels are color coded by type and size. MSDS, technical and end user information is included with each 1 lb. tube.

Note: Typical certifi cations are available from your local supplier. (308L, 4043, 5356, 70S2, RG45 and RG60 rods are identifi ed by stamps on each end or are etched per length.

Part# Description Std. Pkg.308L-035-1 Rod, TIG ER308L .035 x 36 1 lb tube ........................................................................................................................6308L-045-1 Rod, TIG ER308L .045 x 36 1 lb tube ........................................................................................................................6308L-1/16-1 Rod, TIG ER308L 1/16 x 36 1 lb tube ......................................................................................................................6308L-1/8-1 Rod, TIG ER308L 1/8 x 36 1 lb tube ..........................................................................................................................6308L-3/32-1 Rod, TIG ER308L 3/32 x 36 1 lb tube ........................................................................................................................670S2-1/16-1 Rod, TIG ER70S2 1/16 x 36 1 lb tube ........................................................................................................................670S2-1/8-1 Rod, TIG ER70S2 1/8 x 36 1 lb tube ..........................................................................................................................670S2-3/32-1 Rod, TIG ER70S2 3/32 x 36 1 lb tube ........................................................................................................................6LFBB-1/16-1 Rod, Bronze Low Fuming Bare 1/16 x 36 1 lb tube ..................................................................................................6LFBB-1/8-1 Rod, Bronze Low Fuming Bare 1/8 x 36 1 lb tube ....................................................................................................6LFBB-3/32-1 Rod, Bronze Low Fuming Bare 3/32 x 36 1 lb tube ..................................................................................................6LFBC-1/16-1 Rod, Bronze Low Fuming Coated 1/16 x 18” 1 lb tube .............................................................................................6LFBC-1/8-1 Rod, Bronze Low Fuming Coated 1/8 x 36 1 lb tube ................................................................................................6LFBC-3/32-1 Rod, Bronze Low Fuming Coated 3/32 x 36 1 lb tube ..............................................................................................6RG45-1/16-1 Rod, Gas RG45 1/16 x 36 1 lb tube ...........................................................................................................................6RG45-1/8-1 Rod, Gas RG45 1/8 x 36 1 lb tube ..............................................................................................................................6RG45-3/32-1 Rod, Gas RG45 3/32 x 36 1 lb tube ...........................................................................................................................6RG60-1/16-1 Rod, Gas RG60 1/16 x 36 1 lb tube ...........................................................................................................................6RG60-1/8-1 Rod, Gas RG60 1/8 x 36 1 lb tube ..............................................................................................................................6RG60-3/32-1 Rod, Gas RG60 3/32 x 36 1 lb tube ............................................................................................................................6RG60-5/32-1 Rod, Gas RG60 5/32 x 36 1 lb tube ............................................................................................................................6SILBR-1/16-1 Rod, Gas Silicon Bronze 1/16 x 36 1 lb tube ..............................................................................................................6SILBR-1/8-1 Rod, Gas Silicon Bronze 1/8 x 36 1 lb tube ................................................................................................................6SILBR-3/32-1 Rod, Gas Silicon Bronze 3/32 x 36 1 lb tube ..............................................................................................................6

TIG & Gas Rods



118

These Blue Demon MIG wires include MSDS, technical, and end user information with each box.

Note: Typical certifi cations are available from your local supplier.

Part# Description Std. Pkg.308L-023-10 Wire, MIG ER308L .023 X 10 lb Spool ...............................................................................................................10 lb308L-023-2 Wire, MIG ER308L .023 X 2 lb Spool ....................................................................................................................2 lb308L-030-10 Wire, MIG ER308L .030 X 10 lb Spool ...............................................................................................................10 lb308L-030-2 Wire, MIG ER308L .030 X 2 lb Spool ...................................................................................................................2 lb308L-030-5E Wire, MIG ER308L .030 X 5 lb 8” Spool ................................................................................................................5 lb308L-035-10 Wire, MIG ER308L .035 X 10 lb Spool ................................................................................................................10 lb308L-035-2 Wire, MIG ER308L .035 X 2 lb Spool ...................................................................................................................2 lb70S3-023-11 Wire, MIG ER70S3 023 X 11 lb Spool ..................................................................................................................11 lb70S3-030-11 Wire, MIG ER70S3 030 X 11 lb Spool ..................................................................................................................11 lb70S6-023-2 Wire, MIG ER70S6 .023 X 2 lb Spool “P.O.P.” .....................................................................................................2 lb70S6-030-2 Wire, MIG ER70S6 .030 X 2 lb Spool “P.O.P.” .....................................................................................................2 lb70S6-035-2 Wire, MIG ER70S6 .035 X 2 lb Spool “P.O.P.” ......................................................................................................2 lb70S6-045-11 Wire, MIG ER70S6 .045 x 11 lb Spool “P.O.P.” ...................................................................................................11 lb70S6-045-2 Wire, MIG ER70S6 .045 X 2 lb Spool “P.O.P.” ......................................................................................................2 lb71TGS-030-10 Wire, MIG Self Shielding Flux Core .030 x 10 lb Spool .......................................................................................10 lb71TGS-030-2 Wire, MIG Self Shielding Flux Core .030 x 2 lb Spool ...........................................................................................2 lb71TGS-035-10 Wire, MIG Self Shielding Flux Core .035 x 10 lb Spool .......................................................................................10 lb71TGS-035-2 Wire, MIG Self Shielding Flux Core .035 x 2 lb Spool ...........................................................................................2 lb71TGS-045-10 Wire, MIG Self Shielding Flux Core .045 x 10 lb Spool ......................................................................................10 lb71TGS-045-2 Wire, MIG Self Shielding Flux Core .045 x 2 lb Spool ...........................................................................................2 lb

MIG WiresStainless, Aluminum, Mild Steel,

and Flux Core (Self-Shielding)

IWDC“We carry an extensive, diversifi ed line of products, including Weldmark®,

and it’s all available under one roof - YOURS!”

“Most orders ship within 24 hours. Remember, our freight policy is only $600 prepaid (combined), the only exception is Weldmark® ER70S6 wire and we

prepay that product on shipments of 2,376 lbs. or more!”

“We have over 2,800 different part #’s in 28,000 square feet of warehouse space, with a hard-working staff, that is ready to serve you.”

“We utilize UPS and LTL carriers that offer special discounted rates.”

“We have a 97%+ average service level.”

IWDC Phone: 317-562-1483 IWDC Order Fax: 317-549-4570

the key to a better tomorrow - Ron-Son’s Torch · 2019. 8. 15. · WELDMARK TURBO GOSS PRESTOLITE...

Documents

Transcript of the key to a better tomorrow - Ron-Son’s Torch · 2019. 8. 15. · WELDMARK TURBO GOSS PRESTOLITE...