ROBUST HEAVY DUTY CRANE - TECHNO LOGY … · LOGY AND MATURE ELECTRONICS ARE GUARANTORS FOR...
Transcript of ROBUST HEAVY DUTY CRANE - TECHNO LOGY … · LOGY AND MATURE ELECTRONICS ARE GUARANTORS FOR...
1
PK 56502 / 62002 EHLIFETIME EXCELLENCE
ROBUST HEAVY DUTY CRANE TECHNO-LOGY AND MATURE ELECTRONICS ARE GUARANTORS FOR LONG-LIFE CYCLE
3
èMaximum utilisation of the working range thanks to HPSC
èHigh operator friendliness thanks to radio remote control
èAdditional applications with Power Link Plus
èShorter load cycle times thanks to High Speed Extention
èHigh value retention due to KTL coating
4
FIRST-RATE IN DESIGN AND PERFORMANCE
POWER LINK PLUS HIGH VARIETY OF USES
With the 15-degree reverse linkage system, youcan reach through low door openings and alsowork inside buildings. Heavy crane work – evenin difficult conditions.
LOW-MAINTENANCE EXTENSION SYSTEMREDUCES SERVICE TIME
With sliding elements made of synthetic ma-terial and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.
HIGH SPEED EXTENSIONFOR EFFICIENT ASSIGNMENTS
The High Speed Extension speeds up the extension boom system. Crane works faster and more efficiently.
HPSC MAXIMUM UTILISATION OF THE WORKING RANGEThe variable stabiliser positioning of the HighPerformance Stability Control System makesit possible to utilise the lifting capacity to themaximum. It enables working within tightspaces.
PAL 50COMFORT AND SAFETY
The PALTRONIC 50, PALFINGER offers the latest control electronics for the series production crane. The custom designed electronic operates and monitors the crane and offers more efficiency in use and safety.
CONTROL CONSOLE ALL INFORMATION AT A GLANCE
All important information about the crane can be seen on the main control stand. Ergonomic control levers and the optional lighting package provide increased safety and comfort even in poor visibility conditions.
KTL – CATHODIC DIP PAINTING FOR RETAINING HIGH VALUE
The UV-resistant coating guarantees long-termsurface protection. Perfect appearance duringthe entire lifetime for maximum resale value.
FUNCTIONAL DESIGN PRACTICAL AND ATTRACTIVE
Robust plastic covers protect crane partsagainst dirt and damage. Better appearance and increased operational comfort – duringthe entire lifetime.
RADIO REMOTE CONTROL DIALOGUE WITH THE OPERATOR
PALFINGER radio remote controls are quipped with linear lever or cross lever and provide the greatest possible comfort for the operator. All EH models with LED-Display inform the crane operato
***
* Wunschausrüstung/länderspezifische Ausrüstung
5
PERFECT DIMENSIONS
DIMENSIONS
(89.75")
(86.50")
(100.39")
(307.09")
(67.28")
(61.69"–67.28") (59.06")
(38.
43")
(101
.85"
)
(123
.90"
)
(192
.05"
)
2280
2197
1567–1709 1500
2550
7800
1709
976
2587
3147
4878
TECHNICAL DATA
PK 56502 PK 62002 EH
Max. lifting moment 52.2 mt/512.0 kNm 377600 ft.lbs 57.8 mt/567.0 kNm 418160 ft.lbs
Max. lifting capacity 20200 kg/198.2 kN 44530 lbs 22200 kg/217.8 kN 48940 lbs
Max. hydraulic outreach 16.2 m 53' 2'' 16.2 m 53' 2''
Max. manual outreach 23.1 m 75' 9'' 23.1 m 75' 9''
Slewing angle 370 ° 370 °
Slewing torque 6.6 mt/65.0 kNm 47940 ft.lbs 6.6 mt/65.0 kNm 47940 ft.lbs
Stabiliser spread 7.8 m 25' 7'' 7.8 m 25' 7''
Fitting space required (min./max.) 1.60 m/1.71 m 5' 3''/5' 7'' 1.60 m/1.71 m 5' 3''/5' 7''
Width folded 2.55 m 8' 4'' 2.55 m 8' 4''
Max. operating pressure 320 bar 4640 psi 350 bar 5075 psi
Recommended pump capacity from 70 l/min 18.5 US gal./min from 80 l/min 21.1 US gal./min
to 80 l/min 21.1 US gal./min to 100 l/min 26.4 US gal./min
Dead weight (std.) 5130 kg 11310 lbs 5130 kg 11310 lbs
6
PK 56502HIGH PERFORMANCE
B
15°
max 19800kg
(S507–SK–E)
DTS507SGA/04
0200
01/2011PK 56502 BPK 56502
9.4m
7.5m
5.7m
4.0m12400kg
8800kg
6700kg
5400kg
0m0m
2m
4m
6m
8m
10m
12m
14m
0m
–2m
–4m0m 2m 4m 6m 8m 10m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SGA/04
0400
01/2011PK 56502 D
PK 56502
13.8m
11.6m
9.5m
7.6m
5.8m
4.1m
8200kg
11700kg
6200kg
4850kg
3950kg
3300kg
0m0m
4m
2m
8m
10m
6m
12m
18m
14m
16m
0m
–4m
–2m
max 18500kg
0m 4m 14m10m6m2m 8m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
C
D E
15°
max 19500kg
(S507–SK–E)
DTS507SGA/04
0300
01/2011PK 56502 CPK 56502
11.5m
9.4m
7.5m
5.7m
4.0m12200kg
8600kg
6500kg
5100kg
4200kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SGA/04
0500
01/2011PK 56502 EPK 56502
max 17700kg
16.1m
13.9m
11.7m
9.6m
7.7m
5.9m
4.2m11300kg
7900kg
5900kg
4600kg
3750kg
3100kg
2650kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
18m
20m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m 14m 16m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabeKonstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
7
PK 62002 EHHIGH PERFORMANCE
B C
D E
15°
max 21900kg
(S507–SK–E)
DTS507SHA/04
0200
01/2011PK 62002–EH B
PK 62002–EH
9.4m
7.5m
5.7m
4.0m13800kg
9800kg
7500kg
6000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
0m
–2m
–4m0m 2m 4m 6m 8m 10m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SHA/04
0400
01/2011PK 62002–EH D
PK 62002–EH
13.8m
11.6m
9.5m
7.6m
5.8m
4.1m
9200kg
13000kg
6900kg
5400kg
4450kg
3750kg
0m0m
4m
2m
8m
10m
6m
12m
18m
14m
16m
0m
–4m
–2m
max 20400kg
0m 4m 14m10m6m2m 8m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
15°
max 21500kg
(S507–SK–E)
DTS507SHA/04
0300
01/2011PK 62002–EH C
PK 62002–EH
11.4m
9.4m
7.5m
5.7m
4.0m13500kg
9600kg
7200kg
5700kg
4700kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SHA/04
0500
01/2011PK 62002–EH E
PK 62002–EH
max 19600kg
16.1m
13.9m
11.7m
9.6m
7.7m
5.9m
4.2m12600kg
8900kg
6700kg
5200kg
4200kg
3500kg
3000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
18m
20m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m 14m 16m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabeKonstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
KP-
H56
/620
02EM
1+E
/ E 0
7 / 1
5, K
09
/ 15,
D 0
8 / 1
5
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
WWW.PALFINGER.COM