RESIDENTIAL ROLLING DOORS - B&D Garage Doors …...doors. • The curtain separator gives more...

July 2018SECTION 02/1RETURN TO INDEX

R E S I D E N T I A L

R O L L I N G D O O R S

Roll-A-Door®

New Neo®

Squareline™ Deluxe

Traditional Wideline™

Squareline™ Wideline™

Traditional Low Profile

Firmadoor®

Series 1

Maxi

Rollmasta®

High Wind Doors®

Roll-A-Door® Series 1

Roll-A-Door® Series 2


Neo™

residential rolling door

descriptionThe Neo™ style is a steel rolling overhead garage door has been designed to be operated by a B&D Controll-A-Door® opener which also provides the locking.

It has a wide square profile which provides a modern contemporary look whilst still retaining the unique mini groove top sheet which helps protect the paint finish and assists in consistent performance.

The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs.

profile

size rangeAvailable in sizes from 1250mm to 3000mm in height and from 950mm to 3150mm in width.

features• Wider rib spacing to give a new contemporary

look (approximate large flat 145mm small corrugation 30mm).

• Nylofelt® running strips ensure smooth, quiet, greaseless operation.

• Precision springing and castellated drum ensures consistent balance.

• Steel door stops, with buffers for added safety and quietness.

• Mini-groove top sheet - helps reduce chances of paint rub.

• Weatherseal with deep cushioning, helps restrict entry of water and leaves.

• When closed, curtain covers axle and springs on the inside of door, unlike some competitor’s doors.

• The curtain separator gives more separation to avoid paint rub.

• Guide block and double roller for smooth, quiet operation.

• Springs designed to comply with requirements of Australian Standards - 20,000 cycles.

• Tapers available for doors up to and including 2400H

colours/finishes

• An extensive range of COLORBOND® steel - a silicone modified polyester colour finish plus Zincalume®.

• Timber Coat™ Limited Edition for Roll-A-Door® - a patterned film which is applied to the Zincalume® base material and captures the subtle woodgrain effect and toning of timber.

Refer to the colour selection chart for details.

MODEL Neo

MODEL CODE R1N

COIL THICKNESS 0.4mm

MAX DOOR HEIGHT 3000mm

MAX DOOR WIDTH 3150mm

LOCKING None, opener operated

DRUM TYPE S1 castellated pressed metal

TAPER OPTION Yes

HIGH WIND OPTION No

Product CodeR1N


Drawings are not to scale.

Product CodeR1N

NOTES / INFORMATIONA) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal

products. Consult B&D Doors or your B&D Dealer for advice.B) Roll-A-Door doors, in normal residential and industrial/commercial use, are covered by a 7 year warranty for steel door curtain, covering steel cracking and

lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door’s handbook. Full details of the warranty are available from www.bnd.com.au. Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met.

C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered.

D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action.E) COLORBOND® and Zincalume® are registered trademarks of BlueScope Steel Limited.F) B&D products have many patents and registered designs applicable.G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used.H) Details correct at date of publication. Specifications subject to change without notice.

installation requirements

All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap.

INSTALLATION CLEARANCES

Heights

Headroom (mm) Sideroom (mm)

Recommended Restricted E1 E2 (with opener)

A C D A C LH RH

Up to 2100 450 200 460 415 165115 125-175 133-183*

2101 to 3000 450 200 480 430 180

Neo™


options• Fixed or independent tapers - for garage floors

that slope across the opening.

• Tapers for door heights up to and including 2400H.

• No tapers available for doors 2700H & 3000H

• Internal waist high shoot bolt locking


Squareline™ Deluxeresidential rolling door

descriptionThe Squareline™ Deluxe style is a steel rolling overhead garage door with square profile. It has a unique mini-groove top sheet which helps protect the door’s paint finish and assists in consistent performance.


profile

size rangeAvailable in sizes from 1250mm to 3000mm in height and from 950mm to 3150mm in width. For wider openings we have the Wideline range.

features• Nylofelt® running strips ensure smooth, quiet,

greaseless operation.

• Precision springing and castellated drum ensures consistent balance.

• Steel door stops, with buffers for added safety and quietness.

• Mini-groove top sheet - helps reduce chances of paint rub.


• Waist height centre lift lock with double bar locking action for extra security.

• Sleek “D” shaped handle, conveniently located to assist you with opening and closing.

• Centre lift lock has a deep finger recess externally and turn knob internally for easier operation.

• When closed, curtain covers axle and springs on the inside of door, unlike some competitor’s doors.

• The curtain separator gives more separation to avoid paint rub.



colours/finishes



• Luxe Design™ Limited Edition for Roll-A-Door® - the distinctive reflective surface of COLORBOND® metallic steel draws on the environment and surrounding structure, enabling you to enhance your home design with subtle yet dramatic effects, endless nuances and dynamic changeable qualities.


MODEL Series 1 Deluxe

MODEL CODE R1D




LOCKING Centre lift lock

DRUM TYPE S1 castellated pressed metal

TAPER OPTION Yes

HIGH WIND OPTION Yes

Product CodeR1D



Product CodeR1D

size of door perforationsThe perforations are at 300mm centres with the space between them 200mm constant. The only variable is the distance between the edge of the sheet and the first and last perforation. This varies from approximately 80mm minimum to approximately 220mm maximum.









Heights



A B C D A C LH RH

Up to 2200 350 80 120 460 315 85100 110-160 118-168*

2201 to 3000 370 80 120 480 335 100

Squareline™ Deluxeresidential rolling door

300mm

20mm 100mm


that slope across the opening.• Slots for ventilation.• Removable mullions for wide openings.• Alternative lock positions suitable for servery door.• High wind option.

MULLION CALCULATIONS FOR TWO DOORS

DIMENSIONS

Overall width including guide section nominal - 120mmEffective width excluding guide section nominal - 70mm

OPENING SIZE CALCULATIONS

Where 75mm minimum side fixing is available. The width of the opening minus 20mm equals the sum of the two door widths, ie: 5000mm - 20mm = 4980mm ÷ 2 = 2490mm door width x 2.

Where 100mm side fixing is available. Because of the additional side room available the allowance of 20mm can be ignored, ie: 5000mm ÷ 2 = 2500mm door width x 2.


Product CodeR2W

descriptionThe Traditional Wideline™ is a steel rolling overhead garage door for wide openings. It has a deeper, rounded curtain shape than the Squareline™ Wideline™ making it a stronger door with a more rigid steel curtain and heavy duty springs and drums for the lifting mechanism.


Choose the Traditional profile if your door is going to be used a lot more than usual, or if an extra strong door is needed.

profile




• Precision springing ensures consistent balance.

• Steel door stops.



• Sleek “D” handle for easier operation. Available up to 2400mm height.

• Thicker curtain material than Squareline Deluxe model (R1D).

• Heavy duty spring and drums for the lifting mechanism.

• When closed, curtain covers axle and springs on inside of door, unlike some competitor’s doors.



colours/finishes





MODEL Series 2 Wideline

MODEL CODE R2W





DRUM TYPE S2 pressed metal

TAPER OPTION Yes





Product CodeR2W



• Slots for ventilation.

• Alternative lock positions suitable for servery door.

• High wind option.












300mm

20mm 100mm


Heights



A B C D A C LH RH

Up to 2100 540 65 245 555 475 180135 135-185 143-

193*2101 to 3000 620 65 310 565 555 245


MODEL Series 3 Wideline

MODEL CODE R3W






TAPER OPTION Yes


Product CodeR3W

descriptionThe Squareline™ Wideline™ is a steel rolling overhead garage door designed for wide openings, with square profile. It has a curtain shape the same as the Squareline Deluxe single width door.


profile


features• Nylofelt® running strips and Roll-A-Guides ensure

smooth, quiet, greaseless operation.






• Thicker curtain material than for Squareline Deluxe model (R1D).

• Centre lift lock has a deep finger recess externally and turn knob internally for easier operation.




colours/finishes








Product CodeR3W

















300mm

20mm 100mm


Heights



A B C D A C LH RH

Up to 2100 420 85 150 510 360 90135 135-185 143-

193*2101 to 3000 450 85 150 540 420 120

NOTE: For windlocked doors a minimum of 40mm must be added to sideroom measurements shown at E1 and E2.


Traditional Low Profileresidential rolling door

Product CodeR2L

descriptionThe Traditional Wideline™ is a steel rolling overhead garage door for wide openings. It has a deeper, rounded curtain shape than the Squareline™ Wideline™ making it a stronger door with a more rigid steel curtain and heavy duty springs and drums for the lifting mechanism.


Choose the Traditional profile if your door is going to be used a lot more than usual, or if an extra strong door is needed.

profile









• Heavy duty spring and drums for the lifting mechanism.




colours/finishes





MODEL Series 2L

MODEL CODE R2L






TAPER OPTION Yes



Product CodeR2L















300mm

20mm 100mm

Traditional Low Profileresidential rolling door


Heights



A B C D A C LH RH

Up to 2100 420 65 245 510 360 180135 135-185 143-

193*2101 to 2400 450 65 310 540 420 245



Product CodeR1F

descriptionSteel rolling overhead garage door with square profile.


profile


features• Nylon woven running strips and guides ensure


• Precision springing and steel drum ensures consistent balance.


• Corrugations all the way to bottom of curtain.



• Springs designed for 15,000 cycles.

• Guide block and side roller for smooth operation.

MODEL Series 1

MODEL CODE R1F





DRUM TYPE Pressed metal

TAPER OPTION Yes





colours/finishesAVAILABLE IN

• Extensive range of COLORBOND® colours plus Zincalume® finish (see colour chart for details).



• Removable mullion for wide openings.



products. Consult B&D Doors or your B&D Dealer for advice.B) Firmadoor doors, in normal residential and industrial/commercial use, are covered by a 3 year pro rate warranty on steel door curtain covering steel cracking

and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door’s handbook. Full details of the warranty are available from www.bnd.com.au. Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met.





Product CodeR1F



Heights



A B C D A C LH RH

Up to 2200 350 80 120 460 315 85100 110-160 118-168*

2201 to 3000 370 80 120 480 335 100


Product CodeR3F

descriptionSteel rolling overhead garage door for wide openings, with square profile.

The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then roll up around a drum above the opening, guided by tracks and counterbalanced with springs.

profile


features• Nylon woven running strips and guides ensure


• Precision springing and steel drum ensures consistent balance.


• Corrugations all the way to bottom of curtain.




MODEL Maxi

MODEL CODE R3F






TAPER OPTION Yes

HIGH WIND OPTION Yes up to 5000mm wide

Maxiresidential rolling door



• Extensive range of COLORBOND® colours plus Zincalume® finish (see colour chart for details).



• Counter lock for use in commercial applications.

• High wind option to maximum door width of 5000mm.


products. Consult B&D Doors or your B&D Dealer for advice.B) Firmadoor doors, in normal residential and industrial/commercial use, are covered by a 3 year pro rate warranty on steel door curtain covering steel cracking

and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door’s handbook. Full details of the warranty are available from www.bnd.com.au. Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met.






Product CodeR3F

Maxiresidential rolling door


Heights



A B C D A C LH RH

Up to 2100 420 85 150 510 360 90135 135-185 143-

193*2101 to 3000 450 85 150 540 420 120



Product CodeR1R

descriptionSteel rolling overhead garage door with square profile.


profile


features• Nylon woven running strips ensure smooth, quiet,


• Engineering grade plastic drum for precise roll-up.




• Guide block and side roller for smooth operation.

MODEL Series 1

MODEL CODE R1R





DRUM TYPE Plastic moulded drum

TAPER OPTION Yes





• Extensive range of COLORBOND® colours plus Zincalume® finish (see colour chart for details). Some colour surcharges apply.



• External lock.

• Counter lock for use in commercial applications.



products. Consult B&D Doors or your B&D Dealer for advice.B) Rollmasta doors, in normal residential and industrial/commercial use, are covered by a 12 month warranty (excludes salt corrosion), conditional on proper

care, as recommended in the door’s handbook. Full details of the warranty are available from www.bnd.com.au. Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met.






Product CodeR1R



Heights Width



A B C D A B C D Recom. Restr. LH RH

To 2100

To 3150

350 80 120 460 315 80 85 460 100 80

110-160 118-168*

2101 to 2400 370 80 120 480 335 80 100 480 100 80

2401 to 3000 370 80 120 480 335 80 100 480 100 80


Series 1 High Wind DoorsR1D, R1F, R1R, R1M & R1ME

descriptionB&D Rolling Door products have been tested in accordance to the wind requirements of AS/NZS 4505:2012 (Garage Doors & Other Large Access Doors) which complies to AS/NZS 1170.2:2011 (Wind actions) and AS 4055:2012 (Wind loads for housing).

B&D Series 1 wind rating is an option for the standard rolling door described in this product manual.

Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors. When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry.

features• Incorporates extruded aluminium guides.

• Guide size width total 90mm x 45mm

• Additional width doors and side room are required depending on the building structure. Check the drawing details in compliance section for this information.

• Door headroom remains as per the standard door headroom requirements.

• An additional 110mm minimum should be added to the opening width when calculating the door curtain width. Additional width may be required in some circumstances. Check the drawing details in compliance section for this information.

• For all current Deemed To Comply (DTC) documentation including reference drawings, form 15, section 40 and test summary pages go the the B&D website www.bnd.com.au.

WINDLOCK SYSTEM


Series 2 & 3 High Wind DoorsR2W, R2L, R2F, R2I, R3F, R3W, R3I

descriptionB&D Rolling Door products have been tested in accordance to the wind requirements of AS/NZS 4505:2012 (Garage Doors & Other Large Access Doors) which complies to AS/NZS 1170.2:2011 (Wind actions) and AS 4055:2012 (Wind loads for housing).

B&D Series 2 & 3 wind rating is an option for the standard rolling door described in this product manual.

Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors. When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry.

features• Incorporates extruded aluminium guides.

• Guide size width total 120mm x 45mm

• Additional width doors and side room are required depending on the building structure. Check the drawing details in compliance section for this information.

• Additional width should be added to the opening width when calculating the door curtain width. Check the drawing details in compliance section for this information.

• For all current Deemed To Comply (DTC) documentation including reference drawings, form 15, section 40 and test summary pages go the the B&D website www.bnd.com.au.

CURTAIN S2 WINDLOCK CLIP

S2 HIGH WIND GUIDE

WINDLOCK SYSTEM

RESIDENTIAL ROLLING DOORS - B&D Garage Doors …...doors. • The curtain separator gives more...

Documents

Transcript of RESIDENTIAL ROLLING DOORS - B&D Garage Doors …...doors. • The curtain separator gives more...