RECLOSER SMART. LIGHT. FLEXIBLE.

ii

The need for automated reclosers has never been greater. Unfortunately many of today’s reclosers come with penalties. They weigh too much, and that makes them difficult to install. They aren’t easy to upgrade, so you have to guess about what features to include in case you need them several years from now. What’s more, if the recloser you stock doesn’t come with superior technical support, service and built-in quality, you may find it worse than no recloser at all.

The Elastimold® Recloser addresses all of these problems, and more.

The Elastimold® Recloser is 33% lighter than typical units today, so it’s easier and less expensive to install. Modular design means Smart Grid sensors can be added quickly and simply. Our recloser is compatible with SEL® Controls, the best in the business. Elastimold® customer support, technical expertise and collaborative working relationships with customers mean that you will have the information you need, exactly when you need it.

The Recloser you want, all in one package.

Elastimold® RecloserThe New Standard in Reclosers

1

Elastimold® has been the No. 1 name in underground cable accessories for nearly 60 years and is the leading brand in underground solid dielectric switchgear.

Now, as the industry implements Smart Grid technologies, our world-class designs, engineering and quality-rated production facilities, combined with the best after-sale support and training, have been applied to the next-generation recloser.

Support and Service — Best in the BusinessElastimold® is known for uncommon candor and fast, knowledgeable, user-oriented technical support. Lead times for the Elastimold® Recloser are short — typically two weeks faster than what you expect from other suppliers. From the first day you install it, no question is too small to receive our complete technical attention. If assistance is needed, our response will be swift, and often immediate.

We offer unmatched customer service to go with world-class technical support, top warranties and training in all phases of installation and operation. Your crews will know exactly what we know about the Elastimold® Recloser.

The Elastimold ® Recloser, in either single-phase or three-phase configurations, is fully compatible with SEL® Controls.

1

2

The Elastimold® Recloser is world-class, by design. It responds to every hardware requirement that utilities want, and then some.

Smart — Our recloser is Smart Grid ready with three integral load-side voltage sensors and provision to add source-side voltage sensors, if desired. It was designed to be fully compatible with the industry’s No. 1 name in controls, Schweitzer Engineering Laboratories.

Light — The three-phase Elastimold® Recloser weighs 33% less than existing typical units. The simplicity of the mechanism design, and the compactness of the encapsulated components, contribute to making the Elastimold® Recloser easier to move and install.

Flexible — The Elastimold® Recloser is modular, so field upgrades and retrofits are easy and fast. The single phase recloser has a pole rotation mounting bracket for easier installation.

Made with Your Needs in Mind — We designed the Elastimold® Recloser only after extensive talks with electric utilities. Its characteristics, from easier-to-see open/close indicators to the many robust extra features that we consider “standard,” are there because of you.

Integrated Pole Mounting Bracket

Solid Dielectric Insulation

Current & Voltage Sensors

Manual Tripping Lever

Lifting Rings

Highly Visible 360° Indicators

Elastimold® Recloser — MVRSmart, Light, and Flexible

3

Top Silicone Sheds

Vacuum Bottle

Main Body EPDM Insulation

Solid Dielectric Diaphragm

Pull Rod Assembly / Load Side Voltage Sensor

Bottom Silicone Sheds

Magnetic Actuator

Position Indicator

Current Transformer

Side Silicone Terminal

Upper Cover

Lower Cover

Recloser Operation

The Elastimold® Molded Vacuum Recloser (MVR) operates electrically by energizing a magnetic actuator system with a completely sealed housing. Each pole contains a vacuum interrupter sealed in solid dielectric insulation for mechanical and high dielectric strength.

An open-closed position indicator provides a 360-degree view. An external manual trip assembly is located on the side; when in the down position, it maintains the recloser in a lockout position until it is manually restored. All electrical control connections are made through a sealed single-environment control cable connector on the side.

The combination of the molded vacuum recloser with microprocessor controls accurately detects a wide range of line disturbances and provides reliable, high-speed isolation for adverse conditions.

4

Single Phase

SEL-351RS Kestrel®

10/14-Pin Cable

Three Phase

SEL-351R

14-Pin Cable

Three Phase

SEL-351R FalconTM

14-Pin Cable

Three Phase

SEL-651R x 2

32-Pin Cable

Current Sensor

Pull Rod Assembly/ Load-Side Voltage Sensor

4

Smart Grid Ready

Integral CT (1000:1/500:1 flexibility) and load-side voltage sensors; with provisions to add Elastimold® source-side voltage sensors

Elastimold® Recloser — MVRFeatures and Benefits

Compatible with SEL® recloser controls• SEL-351R

• SEL-351RS Kestrel®

• SEL-351R FalconTM

• SEL-651R

Notes:

Use with the SEL-351R & SEL-351R FalconTM requires connection via MVR power module. The power module is connected to the recloser via a 6 ft., 32-pin cable.

Voltage sensors require SEL-651R x 2 control with six 8VAC LEA inputs.

Typical control settingsA range of controls are available for the Elastimold® Recloser. A typical control includes:

• Overcurrent protection — fast and delay curves

• Sensitive earth fault

• Complete metering

• Recloser wear monitor

• Loop automation

• Fault locator

• Flexible control logic and integration

• Supervisory control and data acquisition ready — multiple communications protocols

• Load profile

SEL is a registered trademark of Schweitzer Engineering Laboratories, Inc.

SMAR

T

5

Side Terminal

Top Shed

Bottom Shed

EPDM Rubber

Silicone Rubber Silicone Rubber

Silicone Rubber

Mounting Bracket

180° Repositioning

Lightweight

Internal diaphragm and silicone rubber sheds reduce weight.

Proven solid dielectric insulation

Molded EPDM main body with overlapping silicone rubber sheds for improved dielectric weatherability and UV performance.

Modular design

Optimized modular design is lightweight and maintenance free. Design is modular and allows for individual pole or shed replacement if ever required.

Pole rotation mount

The single-phase recloser has a unique pole rotation mounting bracket for easier installation and repositioning from 0 to 180 degrees.

Simplified mechanism

Translates into a lightweight device.

LIGH

TFL

EXIB

LE

15 kV 27 kV 38 kV

WEIGHTOTHERS

STANDARDELASTIMOLD®

STANDARDOTHERS


STANDARDOTHERS


STANDARD

Single Phase100 lb 45 kg

57 lb 25.8 kg

100 lb 45 kg

57 lb 25.8 kg

130 lb 60 kg

58 lb 26.3 kg

Three Phase333 lb 150 kg

208 lb 94.3 kg

333 lb 150 kg

208 lb 94.3 kg

430 lb 195 kg

211 lb 95.7 kg

6

Closed Indication Open Indication

15 kV 27 kV 38 kV

POLLUTION LEVELREQUIRED

CREEPELASTIMOLD®

STANDARDREQUIRED

CREEP ELASTIMOLD®

STANDARDREQUIRED

CREEP ELASTIMOLD®

STANDARD

I – Light9.8"

(248 mm)N/A

17.0" (432 mm)

N/A23.9"

(608 mm)N/A

II – Medium12.2"

(310 mm)N/A

21.3" (540 mm)

N/A30.0"

(760 mm)N/A

III – Heavy15.3"

(388 mm)N/A

26.6" (675 mm)

N/A37.4"

(950 mm)N/A

IV – Very Heavy18.9"

(481 mm)41.5"

(1054 mm)33.0"

(837 mm)41.5"

(1054 mm)46.4"

(1178 mm)51.0"

(1295 mm)

Magnetic Actuator

Close Phase Position Trip Phase Position

6

Trip Handle Normal, Closed Position Open & Locked-Out Position

INNO

VATI

VEElastimold® Recloser — MVRFeatures and Benefits

Reduced inventory items

Incorporating extra features and extended capabilities as standard can lead to less stock on your floor.

Single- and three-phase tripping capabilities

The fast and highly reliable electrically-ganged operation provides flexibility of simultaneous three-phase tripping or single-phase tripping with three-phase lockout.

The manual trip lever is mechanically linked to trip and lock out all three phases simultaneously.

Reliable long-life mechanism

The state-of-the-art design of our magnetic actuator offers over 10,000 trip and close full-load operations with no maintenance required.

Easy-to-see position indicator

360-degree position indicator view with large color-coded reflective open/closed indicators on bottom of recloser for easy visibility from ground level.

15 kV 27 kV 38 kVRATED MAX VOLTAGE

OTHERS STANDARD

ELASTIMOLD® STANDARD

OTHERS STANDARD


OTHERS STANDARD


Continuous Current 630 A 800 A 630 A 800 A 630 A 800 A

BIL 95 kV 150 kV 125 kV 150 kV 150 kV 170 kV

7

Typical Recloser Installation Detail

Arresters are recommended to provide protection against overvoltage conditions. When arresters are installed, they should be mounted on the supplied arrester brackets or as close to the recloser as practical.

Optional: 500:1 jumper cable dual ratio CTs will only be used if needing 500:1 CT ratio.

Line

Recloser

351R and 351R Falcon only; Cable Plugs Directly into Recloser on 351RS Kestrel and 651R

Utility Pole

Arresters

Recloser Control

GROU

NDCO

NTRO

L

SUPP

LY

Protective Shield around Pole Ground

Control Cable

System Neutral

PT

Pole Ground

POWER MODULE

GROUNDNEUTRAL

LINE

8

15 kV & 27 kV Single-Phase Reclosers

38 kV Single-Phase Recloser

Elastimold® Recloser — MVRDimensions — Single-Phase Reclosers

THIS INFORMATION IS TRANSMITTED SUBJECT TO THE FOLLOWING UNDERSTANDING AND AGREEMENT BY ACCEPTANCE OF THIS DOCUMENT YOU AGREE THAT ALL RIGHTS TO THE DRAWINGS AND INFORMATION CONTAINE HEREON, AS WELL AS TO THE SUBJECT MATTER HEREOF AND ALL PROPRIETARY AND NOVEL FEATURES DISCLOSED HEREIN, ARE RESERVED BY THOMAS AND BETTS AND THAT DEVICES EMBODYING SUCH FEATURES ORINFORMATION DERIVED FROM THESE DRAWINGS WILL NOT BE MANUFACTURED BY OR FOR YOU OR DISCLOSED TO OTHERS WITHOUT THE PRIOR EXPRESS WRITTENCONSENT OF THOMAS AND BETTS. THESE DRAWINGS AND THE INFORMATION CONTAINED THEREIN ARE AND REMAIN THE PROPERTY OF THOMAS AND BETTS AND ARE NOT TO BE COPIED OR REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE PRIOR WRITTEN CONSENT OF THOMAS AND BETTS ALL DRAWINGS AND INFORMATION TO BE RETURNED TO THOMAS AND BETTS UPON DEMAND OR UPON COMPLETION OF PURPOSE FOR WHICH LENT.

THOMAS & BETTS, PROPRIETARY RIGHTS

DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE

TORQUE BOLTS & NUTS TO EMS-26 UNLESS OTHERWISE SPECIFIED.

MATERIAL

DRAWINGTITLE

SCALE DRAWING NUMBERSHT. SIZE SHT. No.NEXT ASS'Y

ENGINEERING SPEC. QUALITY STD. MATERIAL STD.

ALL DIMENSIONS ON THIS DWG ARE IN UNITS AS CHECKED BELOW

ENGLISH METRIC DUAL

THIRD ANGLE PROJECTION

Thomas & Betts8155 TB BOULEVARDMEMPHIS, TN 38125

PHONE: (800) 888-0211, FAX: (800) 888-0690

A MEMBER OF THE ABB GROUP

INCH mm INCHmm

6.00[152,4]

1.37[34,9]

24.08[611,6]

3188D0396B

1293, EMS-26

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 1-PH, 15-27KV

1/4 D 1 of 2 3188D0396REV ECN- DESCRIPTION BY CHK. DATEA - CREATED FROM 3188C0110 RC - 09/05/14B - ADD VOLT/CURR TAGS RC JP 02/04/15

X

NOTES:1) DIMENSIONS IN BRACKETS [XXX] ARE MILLIMETERS.2) MAXIMUM CANTILEVERED TERMINAL PAD LOAD OF 60 LBS. [27 KG.] PER PAD ALLOWABLE. HORIZONTAL CABLE TENSIONS PER PHASE TO BE OPPOSITE IN DIRECTION.3) WEIGHT= 57 LBS. [25.8 KG.]4) STANDARD POSITION AS SHOWN. TRIP POSITION SHOWN DOTTED.5) CONNECTION OF THE RECLOSER TO THE DESIGNATED LINE AND LOAD SIDE TERMINALS IS ONLY REQUIRED IF THE RECLOSER IS BEING USED WITH A CONTROL CONTAINING DIRECTIONAL OVER CURRENT CAPABILITY.6) CREEPAGE DISTANCE: LINE TO GROUND = 41.50" [1054] LOAD TO LINE = 52.00" [1321]7) INTERRUPTER RATING = 12.5 KA8) BIL: LINE TO GND = 150KV LINE TO LINE = 150KV

OPEN/CLOSED INDICATOR

FRONT VIEW

REAR VIEW

3D VIEW

MANUAL TRIP HANDLE(SEE NOTE 4)

OPEN/CLOSED INDICATOR(SEE VIEW)

3/8-16 BOLTFOR SECURINGRECLOSER TOFRAME

NAMEPLATE

RECLOSER

MOUNTING HOLES FORUSER SUPPLIED5/8 [16] DIA. LAGOR THRU BOLT

OPEN - GREENBLACK BLACK

CLOSED - RED



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

6.00[152,4]

1.37[34,9]

24.08[611,6]

3188D0398B

1293, EMS-26

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 1-PH, 38KV


X



FRONT VIEW

REAR VIEW

3D VIEW




NAMEPLATE

RECLOSER


OPEN - GREEN BLACK BLACK CLOSED - RED



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

6.00[152,4]

1.37[34,9]

24.08[611,6]

3188D0396B

1293, EMS-26

R.CARTELLI 09/05/14



X



FRONT VIEW

REAR VIEW

3D VIEW




NAMEPLATE

RECLOSER


OPEN - GREENBLACK BLACK

CLOSED - RED



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

6.00[152,4]

1.37[34,9]

24.08[611,6]

3188D0398B

1293, EMS-26

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 1-PH, 38KV


X



FRONT VIEW

REAR VIEW

3D VIEW




NAMEPLATE

RECLOSER


OPEN - GREEN BLACK BLACK CLOSED - RED

35.05[890,1]

35.05[890,1]

37.92[963,1]

36.15[918,2]

19.60[497,9]

19.60[497,8]

19.72[501]

19.72[501]

8.63[219,3]

8.63[219,3]

10.07[255,7]

10.07[255,7]

3.36[85,3]

3.36[85,3]

1.75[44,5]

1.75[44,5]

9

15 kV & 27 kV Three-Phase Reclosers

38 kV Three-Phase Recloser

Elastimold® Recloser — MVRDimensions — Three-Phase Reclosers

THIS

INFO

RM

ATIO

N IS

TRA

NS

MITTE

D S

UB

JEC

T TO TH

E FO

LLOW

ING

UN

DE

RS

TAN

DIN

G A

ND

AG

RE

EM

EN

T BY

AC

CE

PTA

NC

E O

F THIS

DO

CU

ME

NT Y

OU

AG

RE

E TH

AT A

LL RIG

HTS

TO TH

E D

RA

WIN

GS

AN

D IN

FOR

MA

TION

CO

NTA

INE

HE

RE

ON

, AS

WE

LL AS

TO TH

E S

UB

JEC

T MA

TTER

HE

RE

OF A

ND

ALL P

RO

PR

IETA

RY

AN

D N

OV

EL FE

ATU

RE

S D

ISC

LOS

ED

HE

RE

IN, A

RE

RE

SE

RV

ED

BY

THO

MA

S A

ND

BE

TTS A

ND

THA

T DE

VIC

ES

EM

BO

DY

ING

SU

CH

FEA

TUR

ES

OR

INFO

RM

ATIO

N D

ER

IVE

D FR

OM

THE

SE

DR

AW

ING

S W

ILL NO

T BE

MA

NU

FAC

TUR

ED

BY

OR

FOR

YO

U O

R D

ISC

LOS

ED

TO O

THE

RS

WITH

OU

T THE

PR

IOR

EX

PR

ES

S W

RITTE

NC

ON

SE

NT O

F THO

MA

S A

ND

BE

TTS. TH

ES

E D

RA

WIN

GS

AN

D TH

E IN

FOR

MA

TION

CO

NTA

INE

D TH

ER

EIN

AR

E A

ND

RE

MA

IN TH

E P

RO

PE

RTY

OF TH

OM

AS

AN

D B

ETTS

AN

D A

RE

NO

T TO B

E C

OP

IED

OR

RE

PR

OD

UC

ED

OR

DIS

CLO

SE

D TO

OTH

ER

S W

ITHO

UT TH

E P

RIO

R W

RITTE

N C

ON

SE

NT O

F THO

MA

S A

ND

BE

TTS A

LL DR

AW

ING

S A

ND

INFO

RM

ATIO

N TO

BE

RE

TUR

NE

D TO

THO

MA

S A

ND

BE

TTS U

PO

N D

EM

AN

D O

R U

PO

N C

OM

PLE

TION

OF P

UR

PO

SE

FOR

WH

ICH

LEN

T.

THO

MA

S &

BE

TTS, P

RO

PR

IETA

RY

RIG

HTS

DR

AW

ING

NU

MB

ER

RE

V

C

AP

PR

OV

ED

CH

EC

KE

D

DR

AW

ND

ATE

DA

TE

DA

TE

TORQUE BOLTS & NUTS TO EMS-26

UNLESS OTHERWISE SPECIFIED.

MA

TER

IAL

DR

AW

ING

TITLE

SC

ALE

DR

AW

ING

NU

MB

ER

SH

T. SIZE

SH

T. No.

NE

XT A

SS

'Y

EN

GIN

EE

RIN

G S

PE

C.

QU

ALITY

STD

.M

ATE

RIA

L STD

.

ALL DIMENSIO

NS ON THIS DW

G ARE IN UNITS AS CHECKED BELO

W

ENGLISH

METRIC

DUAL

THIRD ANGLE PRO

JECTION

Thomas & Betts

8155 TB B

OU

LEV

AR

DM

EM

PH

IS, TN

38125P

HO

NE

: (800) 888-0211, FAX

: (800) 888-0690

A M

EMBER O

F THE A

BB GRO

UP

INC

Hm

mIN

CH

mm

15.01[381,3]

1.50[38,1]

31

88

D0

39

7C

RE

VE

CN

-D

ES

CR

IPTIO

NB

YC

HK

.DA

TEA

- C

RE

ATE

D FR

OM

3188C0112

RC

JP

09/05/14

B-

UP

DA

TED

PE

R FIR

ST R

EV

IEW

RC

-10/23/14

C-

AD

D V

OLTA

GE

/CU

RR

TAG

SR

CJP

02/06/15

XR.C

AR

TELLI

09/05/14

OU

TLINE, RECLO

SER 3-PH, 15-27KV

(MVR3)

0.063D

1 of 5 3188D

0397

OP

EN

/CLO

SE

D IN

DIC

ATO

R

NO

TES

:1) D

IME

NS

ION

S IN

BR

AC

KE

TS [X

XX

] AR

E M

ILLIME

TER

S.

2) MA

XIM

UM

CA

NTILE

VE

RE

D TE

RM

INA

L PA

D LO

AD

OF 60 LB

S.

[27 KG

.] PE

R P

AD

ALLO

WA

BLE

. HO

RIZO

NTA

L CA

BLE

TEN

SIO

NS

PE

R P

HA

SE

TO B

E O

PP

OS

ITE IN

DIR

EC

TION

.3) W

EIG

HT= 208 LB

S. [94.4 K

G.]

4) STA

ND

AR

D P

OS

ITION

AS

SH

OW

N.

TRIP

PO

SITIO

N S

HO

WN

DO

TTED

.5) C

ON

NE

CTIO

N O

F THE

RE

CLO

SE

R TO

THE

DE

SIG

NA

TED

LINE

AN

D LO

AD

SID

E TE

RM

INA

LS IS

ON

LY R

EQ

UIR

ED

IF THE

RE

CLO

SE

R IS

BE

ING

US

ED

WITH

A C

ON

TRO

L C

ON

TAIN

ING

DIR

EC

TION

AL O

VE

R C

UR

RE

NT C

AP

AB

ILITY.

6) CR

EE

PA

GE

DIS

TAN

CE

: LIN

E TO

GR

OU

ND

= 41.50" [1054] LO

AD

TO G

RO

UN

D = 43.60" [1107]

LINE

TO LO

AD

= 52.17" [1320]7) IN

TER

RU

PTE

R R

ATIN

G = 12.5 K

A8) B

IL: LINE

TO G

ND

= 150KV

LINE

TO LIN

E = 150K

V

RE

AR

VIE

W

3D FR

ON

T VIE

W

CLE

AR

AN

CE

SLO

TS FO

RU

SE

R S

UP

PLIE

D3/4 [19] D

IA. LA

G O

RTH

RU

BO

LTS

GR

OU

ND

TER

MIN

AL

RE

CLO

SE

R(TY

P.)

CLO

SE

D - R

ED

BLA

CK

OP

EN

- GR

EE

NB

LAC

K

THIS

INFO

RM

ATIO

N IS

TRA

NS

MITTE

D S

UB

JEC

T TO TH

E FO

LLOW

ING

UN

DE

RS

TAN

DIN

G A

ND

AG

RE

EM

EN

T BY

AC

CE

PTA

NC

E O

F THIS

DO

CU

ME

NT Y

OU

AG

RE

E TH

AT A

LL RIG

HTS

TO TH

E D

RA

WIN

GS

AN

D IN

FOR

MA

TION

CO

NTA

INE

HE

RE

ON

, AS

WE

LL AS

TO TH

E S

UB

JEC

T MA

TTER

HE

RE

OF A

ND

ALL P

RO

PR

IETA

RY

AN

D N

OV

EL FE

ATU

RE

S D

ISC

LOS

ED

HE

RE

IN, A

RE

RE

SE

RV

ED

BY

THO

MA

S A

ND

BE

TTS A

ND

THA

T DE

VIC

ES

EM

BO

DY

ING

SU

CH

FEA

TUR

ES

OR

INFO

RM

ATIO

N D

ER

IVE

D FR

OM

THE

SE

DR

AW

ING

S W

ILL NO

T BE

MA

NU

FAC

TUR

ED

BY

OR

FOR

YO

U O

R D

ISC

LOS

ED

TO O

THE

RS

WITH

OU

T THE

PR

IOR

EX

PR

ES

S W

RITTE

NC

ON

SE

NT O

F THO

MA

S A

ND

BE

TTS. TH

ES

E D

RA

WIN

GS

AN

D TH

E IN

FOR

MA

TION

CO

NTA

INE

D TH

ER

EIN

AR

E A

ND

RE

MA

IN TH

E P

RO

PE

RTY

OF TH

OM

AS

AN

D B

ETTS

AN

D A

RE

NO

T TO B

E C

OP

IED

OR

RE

PR

OD

UC

ED

OR

DIS

CLO

SE

D TO

OTH

ER

S W

ITHO

UT TH

E P

RIO

R W

RITTE

N C

ON

SE

NT O

F THO

MA

S A

ND

BE

TTS A

LL DR

AW

ING

S A

ND

INFO

RM

ATIO

N TO

BE

RE

TUR

NE

D TO

THO

MA

S A

ND

BE

TTS U

PO

N D

EM

AN

D O

R U

PO

N C

OM

PLE

TION

OF P

UR

PO

SE

FOR

WH

ICH

LEN

T.

THO

MA

S &

BE

TTS, P

RO

PR

IETA

RY

RIG

HTS

DR

AW

ING

NU

MB

ER

RE

V

C

AP

PR

OV

ED

CH

EC

KE

D

DR

AW

ND

ATE

DA

TE

DA

TE



MA

TER

IAL

DR

AW

ING

TITLE

SC

ALE

DR

AW

ING

NU

MB

ER

SH

T. SIZE

SH

T. No.

NE

XT A

SS

'Y

EN

GIN

EE

RIN

G S

PE

C.

QU

ALITY

STD

.M

ATE

RIA

L STD

.

ALL DIMENSIO

NS ON THIS DW

G ARE IN UNITS AS CHECKED BELO

W

ENGLISH

METRIC

DUAL

THIRD ANGLE PRO

JECTION

Thomas & Betts

8155 TB B

OU

LEV

AR

DM

EM

PH

IS, TN

38125P

HO

NE

: (800) 888-0211, FAX

: (800) 888-0690

A M

EMBER O

F THE A

BB GRO

UP

INC

Hm

mIN

CH

mm

15.01[381,3]

1.50[38,1]

31

88

D0

39

9C

RE

VE

CN

-D

ES

CR

IPTIO

NB

YC

HK

.DA

TEA

- C

RE

ATE

D FR

OM

3188C0113

RC

JP

09/05/14

B-

UP

DA

TE P

ER

FIRS

T RE

VIE

WR

C-

10/23/14

C-

AD

D V

OLTA

GE

/CU

RR

TAG

SR

CJP

02/06/15

XR.C

AR

TELLI

09/05/14

OU

TLINE, RECLO

SER 3-PH, 38KV

(MVR3)

0.063D

1 of 5 3188D

0399

OP

EN

/CLO

SE

D IN

DIC

ATO

R

NO

TES

:1) D

IME

NS

ION

S IN

BR

AC

KE

TS [X

XX

] AR

E M

ILLIME

TER

S.

2) MA

XIM

UM

CA

NTILE

VE

RE

D TE

RM

INA

L PA

D LO

AD

OF 60 LB

S.

[27 KG

.] PE

R P

AD

ALLO

WA

BLE

. HO

RIZO

NTA

L CA

BLE

TEN

SIO

NS

PE

R P

HA

SE

TO B

E O

PP

OS

ITE IN

DIR

EC

TION

.3) W

EIG

HT= 211 LB

S. [95.7 K

G.]

4) STA

ND

AR

D P

OS

ITION

AS

SH

OW

N.

TRIP

PO

SITIO

N S

HO

WN

DO

TTED

.5) C

ON

NE

CTIO

N O

F THE

RE

CLO

SE

R TO

THE

DE

SIG

NA

TED

LINE

AN

D LO

AD

SID

E TE

RM

INA

LS IS

ON

LY R

EQ

UIR

ED

IF THE

RE

CLO

SE

R IS

BE

ING

US

ED

WITH

A C

ON

TRO

L C

ON

TAIN

ING

DIR

EC

TION

AL O

VE

R C

UR

RE

NT C

AP

AB

ILITY.

6) CR

EE

PA

GE

DIS

TAN

CE

: LIN

E TO

GR

OU

ND

= 51.00" [1295] LO

AD

TO G

RO

UN

D = 52.00" [1320]

LINE

TO LO

AD

= 60.56" [1538]7) IN

TER

RU

PTE

R R

ATIN

G = 12.5 K

A8) B

IL: LINE

TO G

ND

= 170KV

LINE

TO LIN

E = 170K

V

RE

AR

VIE

W

3D FR

ON

T VIE

W

CLE

AR

AN

CE

SLO

TS FO

RU

SE

R S

UP

PLIE

D3/4 [19] D

IA. LA

G O

RTH

RU

BO

LTS

RE

CLO

SE

R(TY

P)

GR

OU

ND

TER

MIN

AL

CLO

SE

D - R

ED

BLA

CK

OP

EN

- GR

EE

NB

LAC

K



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

15.01[381,3]

1.50[38,1]

3188D0397C

REV ECN- DESCRIPTION BY CHK. DATEA - CREATED FROM 3188C0112 RC JP 09/05/14

B - UPDATED PER FIRST REVIEW RC - 10/23/14

C - ADD VOLTAGE/CURR TAGS RC JP 02/06/15

X

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 3-PH, 15-27KV(MVR3)

0.063 D 1 of 5 3188D0397


NOTES:1) DIMENSIONS IN BRACKETS [XXX] ARE MILLIMETERS.2) MAXIMUM CANTILEVERED TERMINAL PAD LOAD OF 60 LBS. [27 KG.] PER PAD ALLOWABLE. HORIZONTAL CABLE TENSIONS PER PHASE TO BE OPPOSITE IN DIRECTION.3) WEIGHT= 208 LBS. [94.4 KG.]4) STANDARD POSITION AS SHOWN. TRIP POSITION SHOWN DOTTED.5) CONNECTION OF THE RECLOSER TO THE DESIGNATED LINE AND LOAD SIDE TERMINALS IS ONLY REQUIRED IF THE RECLOSER IS BEING USED WITH A CONTROL CONTAINING DIRECTIONAL OVER CURRENT CAPABILITY.

6) CREEPAGE DISTANCE: LINE TO GROUND = 41.50" [1054] LOAD TO GROUND = 43.60" [1107] LINE TO LOAD = 52.17" [1320]7) INTERRUPTER RATING = 12.5 KA8) BIL: LINE TO GND = 150KV LINE TO LINE = 150KV

REAR VIEW

3D FRONT VIEW

CLEARANCE SLOTS FORUSER SUPPLIED3/4 [19] DIA. LAG ORTHRU BOLTS

GROUND TERMINAL

RECLOSER(TYP.)

CLOSED - RED BLACK

OPEN - GREEN BLACK



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

15.01[381,3]

1.50[38,1]

3188D0399C


B - UPDATE PER FIRST REVIEW RC - 10/23/14


X

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 3-PH, 38KV(MVR3)

0.063 D 1 of 5 3188D0399




REAR VIEW

3D FRONT VIEW


RECLOSER(TYP)

GROUND TERMINAL

CLOSED - RED BLACK

OPEN - GREEN BLACK



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

15.01[381,3]

1.50[38,1]

3188D0397C


B - UPDATED PER FIRST REVIEW RC - 10/23/14


X

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 3-PH, 15-27KV(MVR3)

0.063 D 1 of 5 3188D0397




REAR VIEW

3D FRONT VIEW


GROUND TERMINAL

RECLOSER(TYP.)

CLOSED - RED BLACK

OPEN - GREEN BLACK



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

15.01[381,3]

1.50[38,1]

3188D0399C


B - UPDATE PER FIRST REVIEW RC - 10/23/14


X

R.CARTELLI 09/05/14

OUTLINE, RECLOSER 3-PH, 38KV(MVR3)

0.063 D 1 of 5 3188D0399




REAR VIEW

3D FRONT VIEW


RECLOSER(TYP)

GROUND TERMINAL

CLOSED - RED BLACK

OPEN - GREEN BLACK

15.50[393,7]

15.50[393,7]

24.20[614,8]

24.20[614,8]

42.56[1081]

42.56[1081]

1 6.40[416,6]

18.23[463,1]

33.72[856,6]

35.55[903]

12.95[328,9]

12.95[328,9]

19.60[497,9]

19.60[497,9]

8.81[223,7]

8.81[223,7]

1.75[44,5]

1.75[44,5]

1.75[44,5]

1.75[44,5]

35.08[891,1]

35.08[891,1]

15.50[393,7]

15.50[393,7]

10

15 kV, 27 kV, & 38 kV Triple Single Cluster Mounting Frame

Typical Pole InstallationsDimensions — Triple Single Cluster Mounting Frame



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

36.50[927,1]

1.50[38,1]

19.60[497,9]

8.63[219,3]

1.75[44,5]

1.75[44,5]

35.04[890,1]

15/27KV=36.15[918,1]

38KV=37.92 [963,1]

3188D0402C

REV ECN- DESCRIPTION BY CHK. DATEA - INITIAL RELEASE RC JP 10/22/14B - UPDATE NOTES AND TITLE RC JP 10/31/14

C - ADD VOLT/CURR TAGS RC JP 02/04/15

X

-

R.CARTELLI 10/21/14

OUTLINE, 3 MVR1'S, 15/27KV & 38KVCLUSTER MOUNTING FRAME

- 0.053 D 1 of 4 3188D0402

NOTES:1) ALL DIMENSIONS ARE FOR 15/27KV UNITS UNLESS NOTED OTHERWISE. DIMENSIONS IN BRACKETS [XXX] ARE MILLIMETERS.2) MAXIMUM CANTILEVERED TERMINAL PAD LOAD OF 60 LBS. [27 KG.] PER PAD ALLOWABLE. HORIZONTAL CABLE TENSIONS PER PHASE TO BE OPPOSITE IN DIRECTION.3) WEIGHT: RECLOSER: 15-27KV = 57 LBS. [25.8 KG.] 38KV = 58 LBS. [26.3 KG] FRAME: 62 LBS. [28.1 KG]4) STANDARD POSITION AS SHOWN. TRIP POSITION SHOWN DOTTED.5) CONNECTION OF THE RECLOSER TO THE DESIGNATED LINE AND LOAD SIDE TERMINALS IS ONLY REQUIRED IF THE RECLOSER IS BEING USED WITH A CONTROL CONTAINING DIRECTIONAL OVER CURRENT CAPABILITY.6) CREEPAGE DISTANCE 15-27KV: LINE TO GROUND = 41.50" [1054] LOAD TO GROUND = 43.60" [1107] LINE TO LOAD = 52.17" [1320] CREEPAGE DISTANCE 38KV: LINE TO GROUND = 51.00" [1295] LOAD TO GROUND = 52.00" [1320] LINE TO LOAD = 60.56" [1538]7) INTERRUPTER RATING 15-27KV AND 38KV = 12.5 KA8) BIL 15-27KV: LINE TO GND = 150KV LINE TO LINE = 150KV BIL 38KV: LINE TO GND = 170KV LINE TO LINE = 170KV

REAR VIEW

RIGHT SIDE VIEW

RECLOSER

LINE SIDE(SEE NOTE 5)

LOAD SIDE(SEE NOTE 5)

GROUND TERMINAL(TYP. FOR 4)

TORQUE TERMINALLUGS TO 25 FT/LBS

CLEARANCE SLOTS FORUSER SUPPLIED5/8 [16] DIA. LAG OR THRU BOLTS

POLE MOUNTING FRAMEVOLTAGE TAGS

15kV = BLACK LETTERING ON SILVER BACKROUND25kV = SILVER LETTERING ON BLUE BACKROUND

35kV = BLACK LETTERING ON YELLOW BACKROUNDSCALE 0.250

DETAIL A

OPEN - GREEN BLACK CLOSED - REDBLACK



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

36.50[927,1]

1.50[38,1]

19.60[497,9]

8.63[219,3]

1.75[44,5]

1.75[44,5]

35.04[890,1]

15/27KV=36.15[918,1]

38KV=37.92 [963,1]

3188D0402C



X

-

R.CARTELLI 10/21/14


- 0.053 D 1 of 4 3188D0402


REAR VIEW

RIGHT SIDE VIEW

RECLOSER









DETAIL A


48.06[1220,8]

48.06[1220,8]

74.94[1903,6]

30.13[765,2]

24.58[624,3]



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

36.50[927,1]

1.50[38,1]

19.60[497,9]

8.63[219,3]

1.75[44,5]

1.75[44,5]

35.04[890,1]

15/27KV=36.15[918,1]

38KV=37.92 [963,1]

3188D0402C



X

-

R.CARTELLI 10/21/14


- 0.053 D 1 of 4 3188D0402


REAR VIEW

RIGHT SIDE VIEW

RECLOSER









DETAIL A


58.94[1497]

37.47[951,8]

23.99[609,3]

37.47[951,8]

11

15 kV, 27 kV, & 38 kV Triple Single Pole Mounting Frame

Typical Pole InstallationsDimensions — Triple Single Pole Mounting Frame



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0404A

REV ECN- DESCRIPTION BY CHK. DATEA - CREATED RC XX 02/03/15

X

-

R.CARTELLI 02/03/15

OUTLINE THREE 1PH RECLOSERSTANDARD POLE MOUTING FRAME, 15,27 AND 38kV

- 0.059 D 1 of 4 3188D0404

NOTES:1) DIMENSIONS IN BRACKETS [XXX] ARE MILLIMETERS.2) MAXIMUM CANTILEVERED TERMINAL PAD LOAD OF 60 LBS. [27 KG.] PER PAD ALLOWABLE. HORIZONTAL CABLE TENSIONS PER PHASE TO BE OPPOSITE IN DIRECTION.3) WEIGHT: RECLOSER: 15-27KV = 57 LBS. [25.8 KG.] 38KV = 58 LBS. [26.3 KG] FRAME = 62 LBS. [28.1 KG]4) STANDARD POSITION AS SHOWN. TRIP POSITION SHOWN DOTTED.5) CONNECTION OF THE RECLOSER TO THE DESIGNATED LINE AND LOAD SIDE TERMINALS IS ONLY REQUIRED IF THE RECLOSER IS BEING USED WITH A CONTROL CONTAINING DIRECTIONAL OVER CURRENT CAPABILITY.6) CREEPAGE DISTANCE 15-27KV: LINE TO GROUND = 41.50" [1054] LOAD TO GROUND = 43.60" [1107] LINE TO LOAD = 52.17" [1320] CREEPAGE DISTANCE 38KV: LINE TO GROUND = 51.00" [1295] LOAD TO GROUND = 52.00" [1320] LINE TO LOAD = 60.56" [1538]7) INTERRUPTER RATING 15-27KV AND 38KV = 12.5 KA8) BIL 15-27KV: LINE TO GND = 150KV LINE TO LINE = 150KV BIL 38KV: LINE TO GND = 170KV LINE TO LINE = 170KV


3D REAR VIEW

CLOSED - RED BLACKOPEN - GREEN BLACK



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0404A


X

-

R.CARTELLI 02/03/15


- 0.059 D 1 of 4 3188D0404



3D REAR VIEW




DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0404A


X

-

R.CARTELLI 02/03/15


- 0.059 D 1 of 4 3188D0404



3D REAR VIEW




DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0404A


X

-

R.CARTELLI 02/03/15


- 0.059 D 1 of 4 3188D0404



3D REAR VIEW


10.07[255,7]

15/27KV = 16.40[416,7]

38KV = 18.20[562,2]

10.00 POLE[254]

48.43[1230,2]

22.16[526,8]



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0404A


X

-

R.CARTELLI 02/03/15


- 0.059 D 1 of 4 3188D0404



3D REAR VIEW


19.60[497,9]

1.75[44,5]

1.75[44,5]

8.63[219,3]

35.31[897]

22.12[561,9]

1.50[38,1]

24.69[627,1]

6.00[152,4]

18.00[457,2]

24.08[611,6]

18.00[457,2]

12

THIS INFORMATION IS TRANSMITTED SUBJECT TO THE FOLLOWING UNDERSTANDING AND AGREEMENT BY ACCEPTANCE OF THIS DOCUMENT YOU AGREE THAT ALL RIGHTS TO THE DRAWINGS AND INFORMATION CONTAINE HEREON, AS WELL AS TO THE SUBJECT MATTER HEREOF AND ALL PROPRIETARY AND NOVEL FEATURES DISCLOSED HEREIN, ARE RESERVED BY THOMAS AND BETTS AND THAT DEVICES EMBODYING SUCH FEATURES ORINFORMATION DERIVED FROM THESE DRAWINGS WILL NOT BE MANUFACTURED BY OR FOR YOU OR DISCLOSED TO OTHERS WITHOUT THE PRIOR EXPRESS WRITTEN

CONSENT OF THOMAS AND BETTS. THESE DRAWINGS AND THE INFORMATION CONTAINED THEREIN ARE AND REMAIN THE PROPERTY OF THOMAS AND BETTS AND ARE NOT TO BE COPIED OR REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE PRIOR WRITTEN CONSENT OF THOMAS AND BETTS ALL DRAWINGS AND INFORMATION TO BE RETURNED TO THOMAS AND BETTS UPON DEMAND OR UPON COMPLETION OF PURPOSE FOR WHICH LENT.


DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE



MATERIAL

DRAWINGTITLE

SCALE

DRAWING NUMBER

SHT. SIZE SHT. No.

NEXT ASS'Y

ENGINEERING SPEC.QUALITY STD.

MATERIAL STD.


ENGLISH METRIC DUAL


Thomas & Betts8155 TB BOULEVARD

MEMPHIS, TN 38125

PHONE: (800) 888-0211, FAX: (800) 888-0690A MEMBER OF THE ABB GROUP

INCHmm

INCHmm

3188D0397C

REV ECN-DESCRIPTION

BY CHK. DATESEE SHEET 1

X

R.CARTELLI 08/29/64OUTLINE, RECLOSER 3-PH, 15-27KV

(LINE AND LOAD SIDE ARRESTER FRAMES)

0.063 D 2 of 5 3188D0397

FRONT VIEW

REAR VIEW

5/8-11 BOLT/NUT

FOR MOUNTING FRAME

MOUNTING FRAME FOR

LINE ARRESTERS AND

TRANSFORMERS

5/8-11 BOLT/NUT



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0397C

REV ECN- DESCRIPTION BY CHK. DATESEE SHEET 1

X

R.CARTELLI 08/29/64

OUTLINE, RECLOSER 3-PH, 15-27KV(LINE AND LOAD SIDE ARRESTER FRAMES)

0.063 D 2 of 5 3188D0397

FRONT VIEW REAR VIEW

5/8-11 BOLT/NUTFOR MOUNTING FRAME

MOUNTING FRAME FORLINE ARRESTERS ANDTRANSFORMERS

5/8-11 BOLT/NUT

15 kV, 27 kV, & 38 kV Three-Phase Recloser

15 kV, 27 kV, & 38 kV Single-Phase Recloser

Typical Pole InstallationsDimensions — Single and Three-Phase Reclosers



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

20.48[520,1]

3188D0396B

REV ECN- DESCRIPTION BY CHK. DATESEE SHEET 1 OF 2

X

R.CARTELLI 09/05/14


1/8 D 2 of 2 3188D0396

LEFT SIDE VIEW

3/8-16 BOLT/WASHERFOR MOUNTING FRAME

LOAD SIDE ARRESTER



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

20.48[520,1]

3188D0396B


X

R.CARTELLI 09/05/14


1/8 D 2 of 2 3188D0396

LEFT SIDE VIEW


LOAD SIDE ARRESTER



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

20.48[520,1]

3188D0396B


X

R.CARTELLI 09/05/14


1/8 D 2 of 2 3188D0396

LEFT SIDE VIEW


LOAD SIDE ARRESTER

6.08[154,5]

27.50[698,4]

2.87[73]

13.75[349,2]

18.93[480,9] 8.93

[226,9]

19.37[492]

38.74[984]



DRAWING NUMBERREV

C

APPROVED

CHECKED

DRAWN DATE

DATE

DATE


MATERIAL

DRAWINGTITLE




ENGLISH METRIC DUAL



PHONE: (800) 888-0211, FAX: (800) 888-0690


INCH mm INCHmm

3188D0397C

REV ECN- DESCRIPTION BY CHK. DATESEE SHEET 1

X

R.CARTELLI 08/29/64

OUTLINE, RECLOSER 3-PH, 15-27KV(LINE AND LOAD SIDE ARRESTER FRAMES)

0.063 D 2 of 5 3188D0397

FRONT VIEW REAR VIEW

5/8-11 BOLT/NUTFOR MOUNTING FRAME

MOUNTING FRAME FORLINE ARRESTERS ANDTRANSFORMERS

5/8-11 BOLT/NUT

24.48[621,7]

24.60[624,7]

9.75[247,7]

13

Electrical Characteristics

Test Data SummaryElastimold® MVRs are tested under the requirements of ANSI C37.60-2003.This table highlights the testing covered in Elastimold® Test Report # 372-17-12010.

Ratings and Specifications

DESCRIPTION 15 KV 27 KV 38 KV*Nominal System Voltage (kV RMS) 14.4 25 35Rated Maximum Voltage (kV RMS) 17.1 29.3 38Nominal Frequency (Hz) 50 or 60 50 or 60 50 or 60Phase Spacing on 3-Phase Units (Inches) 15.5 15.5 15.5BIL (kV) 150 150 170Power Frequency Withstand – Dry (kV) 50 60 70Power Frequency Withstand – Wet (kV) 45 50 60Continuous Current (A RMS) 800 800 800Eight-Hour Overload Current (A RMS) 960 960 960CT Ratio 1000/500:1 1000/500:1 1000/500:1Interrupting Current (kA RMS Symmetrical) 12.5 12.5 12.5Making Current (kA Asymmetrical Peak) 32.5 32.5 32.5Creepage Distances – Inches (Line to Ground) 41.5 41.5 51Arc-Extinction Medium Vacuum Vacuum VacuumInsulation Medium EPDM/Silicone Rubber EPDM/Silicone Rubber EPDM/Silicone RubberMechanical Operations 10,000 10,000 10,000Normal Operating Temperatures -10°C to 45°C -10°C to 45°C -10°C to 45°CNormal Operating Conditions Voltage Sensor Accuracy (Load/Line)

+/-3%/1% +/-3%/1% +/-3%/1%

Extreme Operating Temperatures -40°C to 65°C -40°C to 65°C -40°C to 65°CExtreme Operating Conditions Voltage Sensor Accuracy (Load/Line)

5%/1% 5%/1% 5%/1%

CT Accuracy Class 1 Class 1 Class 1Weight (Single-Phase/Three-Phase) 57/208 lbs. 57/208 lbs. 58/211 lbs.* Single-phase 38kV units are rated for use on grounded systems only. Three-phase 38kV units can be used for single-phase tripping on grounded systems only. For ungrounded systems, three-phase tripping is required.

C37.60-2003 STANDARD CLAUSE & DESCRIPTION

15 KV MVRCOMPLIANCE

27 KV MVRCOMPLIANCE

38 KV MVRCOMPLIANCE

6.2 Insulation (Dielectric) Tests � � �6.3 Switching Tests � � �6.4 Making Current Capability � � �6.5 Operating Duty Tests � � �6.6 Minimum Tripping Current Tests � � �6.7 Partial Discharge (Corona) Tests � � �6.10 Temperature Rise Tests � � �6.11 Time-current Tests � � �6.12 Mechanical Duty Tests � � �6.13 Surge Withstand Capability (SWC) Tests � � �Other Testing UV/Weathering Tests � � �Other Testing IEC 62217 — Salt Fog Spray Test (1,000 hr)

� � �

14

Notes:

• Single-phase reclosers function with the SEL® 351RS Kestrel control. Three-phase reclosers function with SEL® 651Rx2, SEL® 351R or SEL® 351R Falcon controls. The MVR power module must be specified when using a SEL® 351R or 351R Falcon control.

• Load-side voltage sensors are standard on all units and function with any SEL® control having at least three 8 Vac, 1M LEA inputs (LEA voltage inputs are not used with a SEL® 351R or 351R Falcon control). All units are upgradeable to source-side voltage sensing but require a SEL® 651RX2XG control with six 8 Vac, 1M LEA inputs.

Ordering Information/Ratings and SpecificationsMolded Vacuum Recloser Catalog Numbering System

Product Type

PhasesVoltage Class

FrameNumber of Control

Power TransformersControl Power Transformer

(CPT)Control Model Control Cable Length & Type

Source Side Voltage Sensing

Terminal Lugs

Line and Load Side Arrester

Brackets

Surge Arresters

Wildlife Protectors (1 per )

Position Indicator

Factory Pre-Assembled

Customer Special

Customer Special

Customer Special

Customer Special

1 2 Description 3 Description 4 Description 5 Description 6, 7 Description 8 Description 9 Description 10 Description 11 Description 12 Description 13 Description 14 Description 15 Description 16 Description 17 18 19 20

R = Recloser 1 1 = Single Phase 1 1 = 15kV 11 = Pole Mounting Frame for MVR1

XX = None

(customer-supplied)XX

XX = None (customer-supplied)

XX = Ships without control

(customer-supplied)X X = Unit ships without cable X X = None X

X = No Terminal

LugsX

X = No Arrester Brackets

X X = None X X = No Wildlife Protectors S

S = Standard (Green

Open, Red Closed)

NN = Ships as

subassembliesX X X X

33 = Three Phase

(Single Tank)2 2 = 27kV 3

3 = Pole Mounting Frame for MVR3

11 = Single Oil

Filled CPT1 = 15kV Class A A = 651R Standard A

A = 6ft, Standard (for Single-Phase only)

11 = 1 (One)

Voltage Sensor

22 = NEMA 2-hole Lug

B

B = Both Line and Load Side Arrester Brackets

AA = 3kV, 2.55kV

MCOVB

B = Both Side & Top Bushing of MVR (Vented Style)

A

A = Alternative

(Green Closed, Red

Open)

Y

Y = Ships completely assembled

and site ready

44 = Triple Single

(3 - Single)3 3 = 38kV S

S = Adjustable Height Substation Frame for 3-Phase (single-tank)

22 = Dual Oil Filled CPT (applicable to 3-phase

or triple-single)1A

1A = 7200: 120V, 1kVA, 1PRI/1SEC (Single Bushing)

B B = 651R Premium B B = 20ft, Standard 33 = 3 (Three)

Voltage Sensors


D

D = Load Side

Arrester Brackets

only

BB = 6kV, 5.1kV

MCOVC

C = Both Side & Top Bushing of MVR (Non-Vented Style)

F

F = Frame pre-assembled,

single-phase reclosers shipped

upright

CC = Standard

Cluster Mounting for Triple Single

3 3 = Single Dry Type PT AB1B = 7620: 120V, 1kVA,

1PRI/1SEC (Single Bushing)C

C = 651R AC Transfer (applicable with Dual PTs)

C C = 25ft, Standard AA = Aerial

LugE

E = Line Side

Arrester Brackets

only

CC = 9kV, 7.65kV

MCOVD

D = Both Side & Top Bushing of MVR (Vented Style) +

Protectors for PT(s) and/or Arrestors

SS = Customer

specific assembly and pre-wiring

HH = Horizontal

Mounting Frame for Triple-Single

44 = Dual Dry Type PT (applicable to 3-phase

or triple-single)1C

1C = 7960: 120V, 1kVA, 1PRI/1SEC (Single Bushing)

DD = 651R Customer

SelectedD D = 30ft, Standard S

S = Special Lug

DD= 10kV, 8.4kV

MCOVE

E = Both Side & Top Bushing of MVR, (Non-Vented Style)

+ Protectors for PT(s) and/or Arrestors

PP = Pole Mounting

for Triple Single1D

1D = 13200: 120V, 1KVA, 2PRI/2SEC (Two Bushing)

EE = 651R Customer

SpecialE E = 35ft, Standard E

E = 12kV, 10.2kV MCOV

SS = Side Bushing of MVR

(Vented Style)

VV = Vertical Mounting

for Triple Single2 = 27kV Class F F = 351R Standard F F = 40ft, Standard F

F = 15kV, 12.7kV MCOV

RR = Side Bushing of MVR

(Non-Vented Style)

F F = Custom Frame 2A2A = 13200: 120V, 1kVA,

1PRI/1SEC (Single Bushing)G G = 351R Premium G G = 45ft, Standard G

G = 18kV, 15.3kV MCOV

TT = Top Bushing of MVR

(Vented Style)

2B2B = 14400: 120V, 1kVA,

1PRI/1SEC (Single Bushing)H

H = 351R Customer Selected

H H = 50ft, Standard HH = 21kV, 17kV

MCOVU

U = Top Bushing of MVR (Non-Vented Style)

2C2C = 13200: 120V, 1KVA, 2PRI/2SEC (Two Bushing)

II = 351RS Kestrel

StandardI I = 60ft, Standard I

I = 24kV, 19.5kV MCOV

2D2D = 14400: 120V, 1kVA, 2PRI/2SEC (Two Bushing)

JJ = 351RS Kestrel

PremiumJ J = 75ft, Standard J

J = 27kV, 22kV MCOV

3 = 38kV Class KK = 351RS Kestrel Customer Selected

K K = 100ft, Standard KK = 30kV, 24.4kV

MCOV

3A3A = 19920:120V, 1kVA,

1PRI/1SEC (Single Bushing)L

L = 351R Falcon Standard

L L = 20ft, 1st 10ft armored LL = 36kV, 29kV

MCOV

4 = 4kV Class MM = 351R Falcon

PremiumM M = 25ft, 1st 10ft armored S

S = Customer Specified (manu-facturer, ratings)

4A4A = 2300:120V, 1kVA,

1PRI/1SEC (Single Bushing)N

N = 351R Falcon Customer Selected

N N = 30ft, 1st 10ft armored

4B4B = 2400:120V, 1kVA,

1PRI/1SEC (Single Bushing)O

O = Reserved for Beckwith 351 equivalent

O O = 35ft, 1st 10ft armored

Dual Primary PP = Reserved for

Beckwith 651 equivalentP P = 40ft, 1st 10ft armored

DADA = 14,400V/7200V:120V

(Dual Primary), 1kVAQ Q = 45ft, 1st 10ft armored

CS CS = Customer Specified PT R R = 50ft, 1st 10ft armored

T T = 60ft, 1st 10ft armored

U U = 75ft, 1st 10ft armored

V V = 100ft, 1st 10ft armored

W W = 20ft, full length armored

Y Y = 25ft, full length armored

Z Z = 30ft, full length armored

0 0 = 35ft, full length armored





5 5 = 75ft, 1st 10ft armored


S S = Special Cable

15

ControlsControl Type 1-Phase 3-Phase

SEL® 351RS Kestrel 10/14-pin cable XSEL® 351R X 14-pin cableSEL® 651RX2 X 32-pin cable

Notes:

1. Use with the 351R or 351R Falcon control requires connection via MVR power module. The power module is connected to the recloser via a 6 ft. 32-pin cable.

2. Voltage sensors require 8 Vac, 1M LEA inputs.

SEL is a registered trademark of Schweitzer Engineering Laboratories, Inc.

Ordering Information/Ratings and SpecificationsMolded Vacuum Recloser Catalog Numbering System

Product Type

PhasesVoltage Class

FrameNumber of Control

Power TransformersControl Power Transformer

(CPT)Control Model Control Cable Length & Type

Source Side Voltage Sensing

Terminal Lugs

Line and Load Side Arrester

Brackets

Surge Arresters

Wildlife Protectors (1 per )

Position Indicator

Factory Pre-Assembled

Customer Special

Customer Special

Customer Special

Customer Special

1 2 Description 3 Description 4 Description 5 Description 6, 7 Description 8 Description 9 Description 10 Description 11 Description 12 Description 13 Description 14 Description 15 Description 16 Description 17 18 19 20

R = Recloser 1 1 = Single Phase 1 1 = 15kV 11 = Pole Mounting Frame for MVR1

XX = None

(customer-supplied)XX

XX = None (customer-supplied)

XX = Ships without control

(customer-supplied)X X = Unit ships without cable X X = None X

X = No Terminal

LugsX

X = No Arrester Brackets

X X = None X X = No Wildlife Protectors S

S = Standard (Green

Open, Red Closed)

NN = Ships as

subassembliesX X X X

33 = Three Phase

(Single Tank)2 2 = 27kV 3

3 = Pole Mounting Frame for MVR3

11 = Single Oil

Filled CPT1 = 15kV Class A A = 651R Standard A

A = 6ft, Standard (for Single-Phase only)

11 = 1 (One)

Voltage Sensor


B

B = Both Line and Load Side Arrester Brackets

AA = 3kV, 2.55kV

MCOVB

B = Both Side & Top Bushing of MVR (Vented Style)

A

A = Alternative

(Green Closed, Red

Open)

Y

Y = Ships completely assembled

and site ready

44 = Triple Single

(3 - Single)3 3 = 38kV S

S = Adjustable Height Substation Frame for 3-Phase (single-tank)

22 = Dual Oil Filled CPT (applicable to 3-phase

or triple-single)1A

1A = 7200: 120V, 1kVA, 1PRI/1SEC (Single Bushing)

B B = 651R Premium B B = 20ft, Standard 33 = 3 (Three)

Voltage Sensors


D

D = Load Side

Arrester Brackets

only

BB = 6kV, 5.1kV

MCOVC

C = Both Side & Top Bushing of MVR (Non-Vented Style)

F

F = Frame pre-assembled,

single-phase reclosers shipped

upright

CC = Standard

Cluster Mounting for Triple Single

3 3 = Single Dry Type PT AB1B = 7620: 120V, 1kVA,

1PRI/1SEC (Single Bushing)C

C = 651R AC Transfer (applicable with Dual PTs)

C C = 25ft, Standard AA = Aerial

LugE

E = Line Side

Arrester Brackets

only

CC = 9kV, 7.65kV

MCOVD

D = Both Side & Top Bushing of MVR (Vented Style) +

Protectors for PT(s) and/or Arrestors

SS = Customer

specific assembly and pre-wiring

HH = Horizontal

Mounting Frame for Triple-Single

44 = Dual Dry Type PT (applicable to 3-phase

or triple-single)1C

1C = 7960: 120V, 1kVA, 1PRI/1SEC (Single Bushing)

DD = 651R Customer

SelectedD D = 30ft, Standard S

S = Special Lug

DD= 10kV, 8.4kV

MCOVE

E = Both Side & Top Bushing of MVR, (Non-Vented Style)

+ Protectors for PT(s) and/or Arrestors

PP = Pole Mounting

for Triple Single1D

1D = 13200: 120V, 1KVA, 2PRI/2SEC (Two Bushing)

EE = 651R Customer

SpecialE E = 35ft, Standard E

E = 12kV, 10.2kV MCOV

SS = Side Bushing of MVR

(Vented Style)

VV = Vertical Mounting

for Triple Single2 = 27kV Class F F = 351R Standard F F = 40ft, Standard F

F = 15kV, 12.7kV MCOV

RR = Side Bushing of MVR

(Non-Vented Style)

F F = Custom Frame 2A2A = 13200: 120V, 1kVA,

1PRI/1SEC (Single Bushing)G G = 351R Premium G G = 45ft, Standard G

G = 18kV, 15.3kV MCOV

TT = Top Bushing of MVR

(Vented Style)

2B2B = 14400: 120V, 1kVA,

1PRI/1SEC (Single Bushing)H

H = 351R Customer Selected

H H = 50ft, Standard HH = 21kV, 17kV

MCOVU

U = Top Bushing of MVR (Non-Vented Style)

2C2C = 13200: 120V, 1KVA, 2PRI/2SEC (Two Bushing)

II = 351RS Kestrel

StandardI I = 60ft, Standard I

I = 24kV, 19.5kV MCOV

2D2D = 14400: 120V, 1kVA, 2PRI/2SEC (Two Bushing)

JJ = 351RS Kestrel

PremiumJ J = 75ft, Standard J

J = 27kV, 22kV MCOV

3 = 38kV Class KK = 351RS Kestrel Customer Selected

K K = 100ft, Standard KK = 30kV, 24.4kV

MCOV

3A3A = 19920:120V, 1kVA,

1PRI/1SEC (Single Bushing)L

L = 351R Falcon Standard

L L = 20ft, 1st 10ft armored LL = 36kV, 29kV

MCOV

4 = 4kV Class MM = 351R Falcon

PremiumM M = 25ft, 1st 10ft armored S

S = Customer Specified (manu-facturer, ratings)

4A4A = 2300:120V, 1kVA,

1PRI/1SEC (Single Bushing)N

N = 351R Falcon Customer Selected

N N = 30ft, 1st 10ft armored

4B4B = 2400:120V, 1kVA,

1PRI/1SEC (Single Bushing)O

O = Reserved for Beckwith 351 equivalent

O O = 35ft, 1st 10ft armored

Dual Primary PP = Reserved for

Beckwith 651 equivalentP P = 40ft, 1st 10ft armored

DADA = 14,400V/7200V:120V

(Dual Primary), 1kVAQ Q = 45ft, 1st 10ft armored

CS CS = Customer Specified PT R R = 50ft, 1st 10ft armored

T T = 60ft, 1st 10ft armored

U U = 75ft, 1st 10ft armored

V V = 100ft, 1st 10ft armored

W W = 20ft, full length armored

Y Y = 25ft, full length armored

Z Z = 30ft, full length armored






5 5 = 75ft, 1st 10ft armored


S S = Special Cable

16

Accessories

ACCESSORY NAME/DESCRIPTION PART NUMBER

Three-phase Line Side Arrester Frame 3188D0120G1

Three-phase Load Side Arrester Frame 3188D0121G2

Single-phase Line Side Arrester Frame 3188C0122G1

Single-phase Load Side Arrester Frame 3188C0123G1

Single-phase Line & Load Side Arrester Frame 3188C0474G1

Horizontal Mounting Frame 3188D0293G1

Cluster Mounting Frame 3188D0204G1

Wildlife Protector Top Bushing (one per phase) 3070A1191P1

Wildlife Protector Side Bushing (one per phase) 3070A1190P1

Source-side Voltage Sensors (one per phase) 3188C0075G1*

Substation Mounting Frame 3188D0119G1

NEMA 2-hole Terminal Lug Kit 3188B0126G1

NEMA 4-hole Pad 3180A0661P1

Aerial Lug 3070B1302P1

* Source-side voltage sensors for Triple-Single applications require different cable lengths. Contact your T&B representative for part number.

Ask Us About the Elastimold® Recloser TodayThe Elastimold® Recloser team at Thomas & Betts is eager to further demonstrate the benefits of this industry’s premier product. For additional technical information and details, call or write us today.

17

Notes

18

Visit the T&B world of electrical product solutionsVisit our web site for more information about

Thomas & Betts solutions and our newest products.

For a user-friendly catalog and competitive part

number search, application and technical support

and other useful information, go to:

www.tnb.com

Industry codes and specificationsAll Thomas & Betts products meet or exceed applicable

industry specifications or codes which are detailed in

the appropriate T&B product literature.

IEEE ANSI RUS

Please ask your Thomas & Betts sales representative for a complete catalog of quality Thomas & Betts electrical products or visit us at www.tnb.com. For customer service, call 1-800-816-7809. For technical questions, call 1-888-862-3289.

© 2016 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A. 02/16 GM7117

Thomas & Betts Corporation Electrical Division 8155 T&B Boulevard Memphis, TN 38125 901-252-5000 www.tnb.com

RECLOSER SMART. LIGHT. FLEXIBLE. -...

Documents

Transcript of RECLOSER SMART. LIGHT. FLEXIBLE. -...