Recent Changes to Greenhouse Gas Reporting for Petroleum ... Denver-HSSE Study... · 1/14/2016 ·...
Transcript of Recent Changes to Greenhouse Gas Reporting for Petroleum ... Denver-HSSE Study... · 1/14/2016 ·...
NYSE: WLL
Recent Changes to Greenhouse Gas Reporting for Petroleum and Natural Gas Systems
SPE Denver Section – HSSE Study GroupJanuary 14, 2016
NYSE: WLL
Goals
• Discuss the Requirements
• Achieving & Maintaining Compliance
• Actions
NYSE: WLL
Topics
• Background
• Previous Reporting
• Recent Revisions
• Source Types
• Applicability
• Monitoring, Recordkeeping, Reporting
• QA/QC
• Timeline
• How to prepare?
2
NYSE: WLL
Quiz Time…
What’s the best way to start out the New Year?
1st Round Bye…? Another EPA air rule…?
On October 22, 2015, EPA
finalized significant changes to
the Greenhouse Gas
Mandatory Reporting Rule for
the oil and gas industry. These
changes, which became
effective January 1, 2016,
primarily affect the upstream
and midstream sectors…
NYSE: WLL
Background
• EPA’s Greenhouse Gas Reporting Program (“GHGRP”)
• When it all began…2010 (first reporting year):
– Combustion sources only (Subpart C)
• Petroleum and Natural Gas Systems (Subpart W) added for 2011
• Pollutants of interest: CO2, CH4, N2O� Global Warming Potential (GWP):
� CO2 = 1, CH4 = 25, N2O = 298
� Assessment by Intergovernmental Panel on Climate Change (IPCC)
� 100-year time horizon
NYSE: WLL
Industries Reporting – Direct Emitters (2014 GHGRP)
NYSE: WLL
Petroleum and Natural Gas Systems: Subpart W (2014 GHGRP)
NYSE: WLL
Previous Reporting
• What’s reported?– Actual GHG emissions for calendar year
• 25,000 MT CO2e threshold;
• Once in: limited off ramps
• Which segments were previouslyreported?– Production (basin-wide emission sources
considered as one “facility”)• On/associated with single well pad
– Gas Processing (classic “facility”)
– Transmission Compression (classic “facility”)
NYSE: WLL
Source Types – Subpart W
NYSE: WLL
What Was Excluded?
• Previously excluded:
– Gathering and Boosting
• Deferred since 2010, pending further analysis
– Transmission Pipelines
– Excluded from previous Production Segment:
• Oil well completions and workovers
• Comingled fluids:
�Not on/associated with single well pad
�Excluded CTBs
NYSE: WLL
CTBs and Booster Stations
• Previously Out!
NYSE: WLL
Pop Quiz Time…
• What do Peyton Manning and Subpart W have in common…?
…They’re both back!!
NYSE: WLL
So What’s New?
• New Segments (threshold 25,000 MT CO2e):– Onshore Petroleum and Natural Gas Gathering and Boosting:
• Adds CTBs (comingled fluids), gathering lines that were previously currently exempt
• Facility definition: entire basin
– Onshore Natural Gas Transmission Pipelines
• Blowdowns
• Facility definition: entire company (nationwide)
• Production Segment (existing) adds:– Completions/workovers for oil wells (hydraulic fracturing)
– Reporting of well ID (API) numbers
• EPA’s Objective: capture previously unreported emission sources in the oil and gas industry
NYSE: WLL
Segments – Subpart W
NYSE: WLL
What Does this Mean for Operators?
• Adds more basin reporting…data collection beginning in January 2016
• Pipeline Segment: nationwide
• More data collection for oil well completions and workovers (including meter calibrations)
• More public exposure: – EPA’s Facility Level Information on GreenHouse Gases Tool
(FLIGHT):
EPA Facility Level GHG Emissions Data
NYSE: WLL
FLIGHT Data by Operator
NYSE: WLL
Rule Details(1 of 3)
• New Information needed:– Production: Oil well completions/workovers with
frac:
• Directly measure gas from flowback– Same approach as gas wells
• Requires flow meter calibrations– Completions contractor
– Gathering and Boosting:• Generally uses the same calculation methods as Production
Segment
• New: Gathering line mileage (pipeline equipment leaks)
• Blowdown vent stacks (excluded in Production segment)
• Combustion: uses fuel gas composition data (C1 - C5)
– Not Subpart C emission factors
NYSE: WLL
Rule Details(2 of 3)
Gathering and Boosting – Source Types
(1) Natural gas pneumatic device venting(2) Natural gas driven pneumatic pump venting(3) Acid gas removal vents(4) Dehydrator vents(5) Blowdown vent stacks (compressors, pig traps, gathering lines)(6) Storage tank vented emissions(7) Flare stack emissions(8) Centrifugal compressor venting(9) Reciprocating compressor venting(10) Equipment leaks(11) Gathering pipeline equipment leaks(12) Combustion equipment (fuel gas composition needed)
NYSE: WLL
Rule Details(3 of 3)
Onshore Natural Gas Transmission Pipelines – Source Types
– Blowdowns:
• Log events (when, where?)
• Volume of releases to the atmosphere:
– Dimensions of pipeline
– Pressure
– Temperature
• Composition (CH4, CO2)
NYSE: WLL
Industry Concerns
1. Definitions:– Facility– Petroleum gathering pipelines (not just gas)
2. Cost and Level of Effort!3. Meters: oil wells with hydraulic fracturing4. Reporting burden: compressor threshold (hp)5. Gathering pipeline blowdowns6. Combustion sources: fuel gas composition needed7. Superfluous information requested for reporting
(not critical to emissions)� Industry challenging some issues:
� GPA Petition for Review: blowdowns, facility definition, etc.o Filed 12/21/2015o EPA meeting 1/21/2016
NYSE: WLL
Where to Start?
• Applicability determination is the key starting point!
• Is the facility or activity in or out?
Chances are, if it was out before…it is innow (beginning in January 2016)!
NYSE: WLL
How to Prepare?(1 of 2)
Keep in mind it takes a team effort!1. Determine the new data elements needed to
calculate emissions� Decide how to track events (blowdowns!)� Pipeline mileage
2. Develop new processes and create or modify software to collect the required information
3. Update GHG monitoring plans4. Conduct training for persons responsible for
collecting and reporting data5. Revise reporting processes and update data
management software
NYSE: WLL
How to Prepare?(2 of 2)
6. Plan periodic reviews of data collected
– Avoid being inundated at end of year!
7. Develop plan for documenting and archiving data used for reporting
8. Conduct site-specific inventories (MOC)
9. Gather and analyze oil or gas samples
10.Install and calibrate flowmeters
NYSE: WLL
QA/QC Is Important!
• Review and verify
• Does it make sense?
NYSE: WLL
Is there a way out?
• Yes, but…only for a limited time!
• Beginning in 2017…
EPA allows the use of the Best Available Monitoring Method (BAMM) for all of 2016.
…You must collect the
required data inputs
for emissions
calculations! You can
no longer “get out of
jail free”!
NYSE: WLL
Timeline
1/1/2016
1) Monitoring Plan
2) Calibrated
meters
3) Begin data
collection
12/31/2016
BAMM Ends
1/30/2017
1) Assign DR
2) New segment
registration
3) File COR
3/31/2017
Report RY2016
NYSE: WLL
Questions?
http://www.epa.gov/ghgreporting