Reality Check #15

8/3/2019 Reality Check #15

http://slidepdf.com/reader/full/reality-check-15 1/7



THE FRAMEWORK TRY-IN



Before the patient arrives….

Do what?



DON’T FORGET TO DISINFECT AND RINSE THE FRAMEWORK!

CHECK



FITTING THE FRAMEWORK

Gently now and do what?



1. Spray with Occlude.2. Seat gently and don’t force.

3. Don’t trap soft tissue between clasps and tooth.4. Check guide plates for areas rubbing and adjust to ensure seating.5. USE CARBIDE BURS FOR METAL ADJUSTMENT!!!!!!!6. Once seated fully check to make sure all rests and plating are down on teeth.7. If a Cl. I or II then make sure rotation is around fulcrum line and adjust as needed.8. Check tissue stops in relation to soft tissue. What will that tell you?9. Possibly adjust clasps at this time if needed. Adjust with what?

OCCLUSIONWHAT ARE WE LOOKING FOR????



UNLESS YOU PLANNED TO INCREASE VDO BEFOREHAND BY USING THE FRAMEWORK THEN THE VDO SHOULD BE THE SAME WITH ANDWITHOUT THE FRAMEWORK IN PLACE. THIS IS WHY EXISTINGOCCLUSION NEEDS TO BE LOOKED AT CAREFULLY IN THE PLANNINGAND DESIGN STAGE OF TREATMENT. THIS IS SO IMPORTANT!!!!!

Reality Check #15

Documents

Transcript of Reality Check #15