CS-EE 480 Fall 2006

September, 2006 1University of Portland School of Engineering

Project Pilot RockStanford’s lighting design

TeamEthan Prevost

Kristin Glanville

AdvisorDr. VanDeGrift

Industry RepresentativeMr. Jonathan Fant

CS-EE 480 Fall 2006

September, 2006 2University of Portland School of Engineering

Overview

• Introduction

• Scorecard

• Additional Accomplishments

• Plans

• Issues/Concerns

• Conclusions

CS-EE 480 Fall 2006

September, 2006 3University of Portland School of Engineering

Introduction

• The project is a lighting design schematic for a Stanfords Restaurant and Bar being built at the Northgate Mall in Seattle, Washington.

• A 3-dimensional fully enclosed model will be used to demonstrate the lighting.

• The intensity of the lighting will be presented using the simulator program AGI.

CS-EE 480 Fall 2006

September, 2006 4University of Portland School of Engineering

Layout of the Restaurant

CS-EE 480 Fall 2006

September, 2006 5University of Portland School of Engineering

Sample Lighting Layout

CS-EE 480 Fall 2006

September, 2006 6University of Portland School of Engineering

Scorecard – Previous Plans

• Buy reference books containing building codes for Sri Lanka.

• Begin design for a single classroom within one of the buildings.

CS-EE 480 Fall 2006

September, 2006 7University of Portland School of Engineering

Scorecard – What happened

• The EWB Sri Lanka professional team decided that they didn’t want to use the layout anymore.

• We had to chuck the whole project and start over again.

• We chose to work with Interface Engineering instead.

CS-EE 480 Fall 2006

September, 2006 8University of Portland School of Engineering

Additional Accomplishments

• Got a new building drawing, including hard copies and .dwg AutoCAD files.

• Received the AutoCAD icons for light fixtures that are used by Interface.

CS-EE 480 Fall 2006

September, 2006 9University of Portland School of Engineering

Plans

• Visit a Stanfords Restaurant and Bar and take measurements using a light meter.

• Layout the placement of where we want which type of light fixture.

• Simulate the lights in AGI making sure that we have the proper light levels.

• Start calculating and setting up the circuits.

CS-EE 480 Fall 2006

September, 2006 10University of Portland School of Engineering

MilestonesNumber Description Original

9/26/06Previous9/26/06

Present11/03/06

1 Product Approval 10/07/06 10/07/06 11/01/06

2 Plan Approval 11/10/06 11/10/06 11/10/06

3 Layout light fixtures 11/17/06 11/17/06 11/17/06

4 Connect circuits and make power calculations

11/24/06 11/24/06 11/24/06

5 Simulate Lighting Design 12/06/06 12/06/06 12/06/06

6 Design Release 12/08/06 12/08/06 12/08/06

7 Architectural Model Built 02/16/07 02/16/07 02/16/07

8 TOP’s Approval 02/23/07 02/23/07 02/23/07

9 Light Circuitry added to Model

03/16/07 03/16/07 03/16/07

10 Prototype Release 04/13/07 04/13/07 04/13/07

11 Founder’s Day 04/17/07 04/17/07 04/17/07

11 Final Report 04/23/07 04/23/07 04/23/07

CS-EE 480 Fall 2006

September, 2006 11University of Portland School of Engineering

Concerns/Issues

• Being allowed to take measurements in the local Stanfords Restaurant.

• Having our layout satisfy the Seattle Energy code.

• Have the circuit be as cost effective as possible

CS-EE 480 Fall 2006

September, 2006 12University of Portland School of Engineering

Conclusions

• Had to start a new project, but getting back on track

• Should hope to have the lighting design done by the end of the semester.