Product rane - MIPA SE: · PDF fileProduct rane 2015 MIPA SE · Am Oberen ... +49...

Decorative Products

Product range

2015

MIPA SE · Am Oberen Moos 1 · D-84051 Essenbach · Tel: +49 8703/922-0 · Fax: +49 8703/[email protected] · www.mipa-paints.com

Standards and abbreviations

DIN EN 13300 for interior coatingsDescribes classification of water-based paints in terms of different quality features: hiding power, scrub resistance, spreading rate, cleanability and durability.

Opacity class (Contrast Ratio)Class 1 = 99,5 % Classification is based on spreading rate in m²/lClass 2 = 98 % and < 99,5 % e.g. contrast ratio: class 2 at a spreading rate of 7 m²/lClass 3 = 95 % and < 98 %Class 4 < 95 %

Scrub ResistanceResistance of coatings to withstand wear caused by repeated cleaning operationsClass 1 < 5 µm at 200 strokesClass 2 = 5 µm and < 20 µm at 200 strokes („scrub resistant“ according to DIN 53778)Class 3 = 20 µm and < 70 µm at 200 strokes („wash resistant“ according to DIN 53778)Class 4 < 70 µm at 40 strokesClass 5 = 70 µm at 40 strokes

LEF = free from solvent and softener, low-emissionLF = solvent-free

This symbol marks all Mipa qualities that can be tinted with our tinting system Pro Mix® Decorative.

Sales and delivery conditions

Sales and delivery conditionsOur sales and delivery conditions are valid in all our offers, order-acknowledgements and invoices.

QM Certificate DIN EN ISO 9001:2008 The entire development, production and commercialization of our products are subject to the European quality norm DIN EN ISO 9001. Since 1997 MIPA is certified to this norm.

Mipa Decorative 2015 3

Mipa Interior Paints

Mipa Interior Paints based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Mipa Latex Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Mipa Interior Paints based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Mipa Special Interior Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Mipa Exterior Paints

Mipa Facade Paints based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Mipa Exterior Paints based on silicone resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Mipa Exterior Paints based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Mipa Special Exterior Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Mipa Textured Plasters

Mipa Textured Plasters based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Mipa Textured Plasters based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Mipa Textured Plasters based on silicone resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Mipa Full-Shade and Tinting Paint 15

Mipa Gloss Coat for interior and exterior use 16

Mipa Primers 16

Mipa Filler 18

Mipa Sealing Agents 18

Protective Aids 19

Mipa Building Enamels

Mipa Primers for metal and wood undergrounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Mipa Metal/Wood Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Mipa White Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Mipa Coloured Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Mipa Floor Coatings 24

Table of contents

Mipa Decorative 20154

Mipa Wood Protection

Mipa Wood-Impregnation / Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Mipa Wood Preservative Stain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Mipa Weather Protection Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Mipa Wood Sealer for floors, parquets 28

Mipa Special Enamels / Mipa Special Coatings

Mipa Thick Film Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Mipa Effect Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Additional Mipa Specialities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Mipa Rust Converter / Paint Remover / Zinc Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . .32

Thinners for Mipa Building Enamels 32

Colour Swatches 33

Colour register / Standard colours Mipa Decorative Products 34

Pro Mix® Decorative 2015 by Mipa – Price list Binder, Colour Concentrate, Colour Swatches 37-44

Table of contents



Mipa Interior Paints based on dispersion resin

unit/pal. package item. no.

Mipa UltimaOpacity class 1 • Scrub resistance class 1 Non-sensitive to sided light.Premium one-coat interior paint, high opacity, durable, drying dull mat for new and renovating coatings. Outstanding processing and product properties on walls and ceiling. Excellent surface-finish. Lap-free application even on surfaces sensitive to sided light. Spreading rate: approx. 7 m²/l

6032

5 l12,5 l

65116 000265116 0004

See page 39

Mipa Durasan Opacity class 1 • Scrub resistance class 2One-coat interior emulsion paint for new and renovating coatings. Non-polluting, scrub resistant. Also suited for sensitive spaces such as hospitals, nursery schools and day cares for seniors. Favoured quality for allergic persons.Spreading rate: approx. 7 m²/l

24 15 l

New!

65117 0005

See page 39

Mipa Titan VolldeckerOpacity class 1 • Scrub resistance class 3white • mat. Full coverage, excellent spreading rate, one-coat interior paint with high wet film coverage for renovating and new coatings of ceilings, walls, ingrain and structured wallpaper, gypsum, render and concrete surfaces.Spreading rate: approx. 7 m²/l

100604024

2,5 l5 l

10 l15 l

65118 000165118 000265118 000365118 0005

See page 39

Mipa Titan Volldecker rapidweißOpacity class 1 • Scrub resistance class 3rapid white • mat.Spreading rate: approx. 7 m²/l

24 15 l 65119 0005

Mipa Extra weißOpacity class 2 • Scrub resistance class 3extra white • matHigh opacity, excellent spreading rate. Suitable for the interior use on walls and ceilings, on plaster, gypsum, concrete surfaces and ingrain wallpaper.Spreading rate: approx. 7 m²/l

100604024

2,5 l5 l

10 l15 l

65110 000165110 000265110 000365110 0005

See page 39

Mipa PlusOpacity class 2 • Scrub resistance class 3white • mat. High opacity spreading rate. Suitable for the interior use on walls and ceilings, render, gypsum, concrete surfaces, and ingrain wallpaper.Spreading rate: approx. 6 m²/l

6040

5 l10 l

65107 000265107 0003

Mipa Meister-Weiß Opacity class 2 • Scrub resistance class 3outstanding opacity • mat. High opacity, wash resistant, excellent spreading rate. Suitable for interior use on walls and ceilings, on renders, gypsum and concrete surfaces.Spreading rate: approx. 6 m²/l

24 15 l 65106 0005





Mipa DIN-MalerweißOpacity class 2 • Scrub resistance class 3Approved quality for project work.High opacity, mat, wash resistant, excellent spreading rate. Suitable for interior use on walls and ceilings, on renders, ingrain wallpaper, gypsum and concrete surfaces.Spreading rate: approx. 6 m²/l

3224

12,5 l15 l

65105 000465105 0005

Mipa Edelweiß Opacity class 2 • Scrub resistance class 3white • mat. High opacity, efficient interior dispersion paint for the coating of walls and ceilings, especially suitable for the public sector.Spreading rate: approx. 6 m²/l

604024

5 l10 l15 l

65114 000265114 000365114 0005

Mipa AirPlusOpacity class 2 • Scrub resistance class 3white • mat • interior use. High opacity, easy applicable wall and ceiling paint for wash resistant interior coatings on rendering, ingrain wallpaper, gypsum and concrete surfaces.Spreading rate: approx. 4 m²/kg

12 35 kg 65134 0000

Mipa Limes Kalkfarbe InnenMipa mineral paint is based on approved and natural raw material lime. For mineral, solvent-free, high diffusible, mat and natural interior wall-surfaces, without additional preserving agents.Spreading rate: approx. 6 m²/l

40 10 l 65133 0003

MipaSol SilikatfarbeHigh weathering resistant, self-levelling silaceous interior and exterior paint, white matt. Based on a binder combination of silica sol and water glas with excellent adhesion, also on organic substrates. Outstanding water vapour diffusion superb opacity and high degree of whiteness.Spreading rate: approx. 4 m²/kg

6024

8 kg25 kg

65357 000165357 0000


Mipa Latex Paints


Mipa Latexfarbe seidenglänzend Opacity class 2 • Scrub resistance class 2scrub resistant • interior and exterior use high opacity. Hard-wearing wall and ceiling paint, for the interior use on render, gypsum and concrete surfaces, as well as light construction boards. Structure-conserving and gloss stability.Spreading rate: approx. 7 m²/l

604032

5 l10 l

12,5 l

65130 000265130 000365130 0004

See page 39



Mipa Latex Paints


Mipa Latexfarbe glänzendOpacity class 2 • Scrub resistance class 2 • scrub resistant• interior and exterior use.Spreading rate: approx. 7 m²/l

100 2,5 l 65132 0001

Mipa Latexfarbe mattOpacity class 2 • Scrub resistance class 2 • scrub resistant • interior useSpreading rate: approx. 7 m²/l

6040

5 l10 l

65126 000265126 0003


Mipa Interior Paints based on silicate resin


Mipa Innensilikat-Farbe Opacity class 1 • Scrub resistance class 2.Premium interior wall paint on silicate base with highest opacity.

24 15 l 65156 0005

Mipa Innensilikat-FarbeOpacity class 2 • Scrub resistance class 2scrub resistant • mat • interior use • high opacity • high diffusion • suited for allergic persons • environment neutral • fungicidal properties, since mineral alkaline. Silicate wall and ceiling paint, excellent spreading rate for plaster gypsum (see product info) and concrete surfaces, as well as light weight construction boards. Especially suited for kindergartens, schools and the preservation of historic buildings.Spreading rate: approx. 7 m²/l

604024

5 l10 l15 l

65155 000265155 000365155 0005

See page 39

Mipa Silikatverdünner Combined priming and thinning agent, for all Mipa Silicate paints. Application instructions: see product information.Spreading rate: approx. 6 m²/l

6/Box7260

1 l5 l

10 l

65055 000165055 000365055 0005

Mipa Silikat-Gipsgrundiermittel Ready-to-use, water-based priming agent • for gypsum substrates • for the interior use • for subsequent use of paints and rendering • silicate-based. Must be used as primer for rendering containing gypsum, for instance lime-plaster.Spreading rate:For smooth undergrounds 8-10 m²/lFor rough undergrounds 4-6 m²/l

60 10 l 65056 0005



Mipa Special Interior Paints


Mipa House-Paint Universalfarbe Interior and exterior use.Opacity class 1 • Scrub resistance class 1whiteFast drying pure acrylate paint for universal application. Resilient, highly weather resistant, water-thinnable with excellent adhesive characteristics on metal zinc surfaces, fibrous cement, wood, hard PVC, render, concrete and aluminium.Spreading rate: approx. 7m²/l

-New- 1006040

2,5 l5 l

10 l

65395 000165395 000265395 0003

See page 39

Mipa RenovierfarbeOpacity class 1 • Scrub resistance class 1• interior and exterior use • low in odour.High opacity isolation paint one-coat renovation paint.High quality, solvent based wall and ceiling paint for the appli-cation on all load-bearing substrates. As one-coat isolating paint especially suited for restaurants, hotels, canteens etc. Perfect for isolating smoke, nicotine and dry water stains or other similar stains.Spreading rate: approx. 7 m²/l

33

Thinner6/Box4/Box

10 l

1 l5 l

65149 0003

69807 000269807 0004

Mipa IsolierweißOpacity class 1 • Scrub resistance class 1• interior and exterior use.Solvent based acrylic resin paint, white matt. Very good insula-ting and barrier properties. Re-coatabel with all dispersion paints. Prevents the bleeding through of critical stains such as nicotine, dry water stains and colouring pens, on walls and ceillings. High opacity, fast drying, aromate free and especially low in odour.Spreading rate: approx. 7 m²/l

6/Box6/Box2/Box

Isoliergrund-Spray6/Box

375 ml750 ml

2,5 l

400 ml

65062 000765062 001565062 0027

68231 0000

Mipa WBS RenovierfarbeOpacity class 2 • Scrub resistance class 1 • low in odourHigh quality, water-thinnable wall and ceiling paint for the application on all load-bearing substrates. One-coat isolation paint specially suited for restaurants, hotels, canteens etc. Perfect for isolating smoke, nicotine and dried water stains.Spreading rate: approx. 7 m²/l

40 10 l 65147 0003

Mipa StrukturfarbeOpacity class 2 • Scrub resistance class 2for textured structures on gypsum boards white • mat• interior and exterior use. High opacity emulsion paint to achieve structured surfaces on smooth surfaces and gypsum boards.Spreading rate: approx. 5-6 m²/l

40 10 l 65145 0003



Mipa Special Interior Paints


Mipa Raufaser flüssig Opacity class 2 • Scrub resistance class 3 • for interior use • good opacity white • mat. High quality, low-tension, good diffusion. Wall and ceiling paint, which can be rolled brushed and sprayed. With a rough structure for seamless coatings on all load-bearing substrates.Spreading rate: approx. ca. 2 m²/l

4024

10 l15 l

65135 000365135 0005

Mipa Raufaser flüssig fein 24 15 l 65135 1005

New

!

Mipa Silikonharz InnenwandfarbePremium interior wall paint based on silicone resin for highly water vapour permeable and breathable interior coatings. Due to the special processing properties with long open time it is perfect for surfaces that are exposed to strong grazing light.• opacity class 1• wet abrasion class 2• colour: white• gloss level: matt• LEF• spreading rate: approx. 7 m²/l

24 15 l 65180 0005

See page 39


Mipa Facade Paints based on dispersion resin


Mipa House-Paint Universalfarbe Exterior and interior use.Opacity class 1 • Scrub resistance class 1White. Fast drying pure acrylate paint for universal application. Resilient, highly weather resistant, water-thinnable with excellent adhesive characteristics on metal zinc surfaces, fibrous cement, wood, hard PVC, render, concrete and aluminium.Spreading rate: approx. 7m²/l

-New- 1006040

2,5 l5 l

10 l

65395 000165395 000265395 0003

See page 39

Mipasan mit AbperleffektFacade paint based on silicone resin, repels water and other impurities completely. Permeability to water vapour, Fungicidal properties low-tension, resistant against driving rain, high resistance to weathering. Spreading rate: approx. 7 m²/l

32 12,5 l 65385 0003

Mipasan Silikonharzfarbe FEFacade paint based on silicone resin, repels water and other impurities completely. Permeability to water vapour, low-tension, resistant against driving rain, high resistance to weathering. Spreading rate: approx. 7 m²/l

24 15 l 65381 0005

See page 40





Mipa Reinacrylat-FassadenfarbeCarbonate protection after two coatings• exterior and interior use • weather resistant.100 % Pure-acrylate facade paint; high opacity, high weather resistance with optimum adhesion for plasters, concrete and brickwork. Due to the high light reflection especially suited for poor illuminated areas such as multi-storey car parks, under- ground carparks, stair wells.Spreading rate: approx. 7 m²/l

32 12,5 l 65370 0004

Mipa Fassaden-FüllfarbeWeather resistant • heavy rain proof• dispersion-based • UV-resistant.High resistance against weathering, good filling power, good diffusion and low-tension acrylic facade paint for plasters, concrete, brick work, fibrous cement, as well as all other exterior load-bearing substrates.Spreading rate: approx. 6 m²/l

100604024

2,5 l5 l

10 l15 l

65305 000165305 000265305 000365305 0005

See page 40

MipaSilSiloxane reinforced, weather resistant according to VOB. Heavy-rain proof • UV-resistant. High resistance against weathering, excellent opacity and good diffusion. Low-tension facade paint.Spreading rate: approx. 5,5 m²/l

60403224

5 l10 l

12,5 l15 l

65360 000265360 000365360 000465360 0005

See page 40


Mipa Exterior Paints based on silicone resin


Mipa Fassaden-Silikonharzfarbe Weather resistant • water-repellent • driving-rain proof • good diffusions.Resistant to ageing and UV, low-tension, high opacity, excellent spreading silicone-resin paint, for all exterior substrates. Also suitable as a scrub resistant interior coat.Spreading rate: approx. 7 m²/l

1004024

2,5 l10 l15 l

65380 000165380 000365380 0005

See page 40

Mipa Fassaden-Silikonharzfarbe fungizidFungicidal properties • Weather resistant • water-repellent driving-rain proof • good diffusions.Resistant to ageing and UV, low-tension, high opacity, excellent spreading silicone-resin paint, for all exterior substrates. Spreading rate: approx. 7 m²/l

24 15 l 65382 0005





Mipa Silikonharz-StreichfüllerSpecial facade paint based on silicone emulsion according to DIN 55945. Water repellent • heavy-rain proof. Fibre-reinforced, highly filling intermediate coating, permeable to water vapour, for Mipa Fassadensilikonharzbeschichtungen and as priming coat for Mipa Silikonharzputz. With proportion of silica sand for the reconciliation of fine rendering cracking.Spreading rate: approx. 3,5 m²/kg

24 18 kg 65525 0000

Mipa WBS MicroSil KonzentratImpregnation concentrate based on silicone-resin • water repellent • interior and exterior use. Water-thinnable impregnation for plaster, concrete, exposed brick work, porous concrete and mineral substrates. Mixing ratio: 9 parts water: 1 part WBS MicroSil (see product information).Spreading rate: approx. 4 m²/l (after mixing)

6/Box 1 l 65004 0002

Mipa ElastikfüllerCold elasticity • satin mat • alkali -resistant • weatherfasteness.Fibre reinforced, cold elastic, façade paint suitable for filling of hair cracking, web or shrinkage fissures in roughcast. Not suitable for dynamic cracks.Spreading rate: approx. 4 m²/l

24 15 l 65375 0005



Mipa Exterior Paints based on silicate resin


Mipa Fassaden-SilikatfarbeWeather resistant according to VOB. Facade silicate resin paint according to DIN 18363 • chalking resistant • high diffusion • fungicidal properties, since mineral alkaline.High opacity, resistant, silicifying, white silicate façade paint, for mineral substrates, render, calcareous-sandstone walls, as well as old sustainable silicate paint coatings.Spreading rate: approx. 6 m²/l

4024

10 l15 l

65355 000365355 0005

See page 40

Mipa SilikatverdünnerCombined priming and thinning agent for all Mipa Silicate paints. Application instructions: see product information.Spreading rate: approx. 6 m²/l

6/Box7260

1 l5 l

10 l

65055 000165055 000365055 0005


Mipa Special Exterior Paints


Mipa WBS DachfarbeWater-thinnable roof paint • fungicidal • New and renovating coat for roof surfaces.Weather resistant according to VOB part C DIN 18363. High weather resistance, satin-mat, good diffusion, elastic roof coating for all sustainable mineral substrates such as concrete, bricks, fibre cement boards and roof tiles (see product information).Spreading rate: approx. 3-4 m²/l

40 10 l 68804 xxxx

coloursred-brown -0006brick red -0007anthracite -0009

Mipa SockelfarbeWeather resistant paint for plinth walls according to VOB. Good diffusion • high opacity • light-fast. Damp course emulsion paint for the decorative finish of the damp course and facade. On render, concrete, brick work and all strong adhesive old substrates. Suited for interior use and hall ways.Spreading rate: approx. 4,5-5,5 m²/l

60 5 l 65840 xxxx

colourslight grey -7160granit grey -7161dark brown -7165

Mipa Rasenmarkierungsfarbe Groundwater neutral marking paint for turf • rain-resistant• plant-compatible • no impairment of lawn growth • water-thinn-able • excellent adhesive power • fast drying. Solvent free, highly white, highly covering dispersion type paint. Ideally suited for the drawing up of marks and lines on lawn surfaces, soccer grounds, tennis courts, hard courts and for many other application areas.Spreading rate: 5-10 g/lfm for 10 cm in line width

Tin for spray marking40

Bucket with pouring spout for roller coating application24

15 kg

25 kg

65105 0012

65105 0013

Further colours on request.

Rasenmarkierungswagen 32138 0000



Mipa Special Exterior Paints


Mipa Straßen- und LinienmarkiererMipa Straßen- und Linienmarkierer is a special paint for durable and load bearing markings with high luminosity. Easy application in upside-down position. Application by hand as well as using a marking trolley is possible. Especially suitable for the marking and line-marking of car parks, in the industrial and private sector.

12/Box 600 ml 68211 xxxx

colourswhite -8001yellow -8003

-Aerosol-

Markierungswagen 32140 0000

New

!

Mipa Linienmarkierer ProfiFast drying special paint for professional use. The excellent adhesion provides a durable and hard wearing line mark. Supe-rior coverage and sharp edges can be achieved in conjunction with our line marking trolleys Allround and Standard. Especially suitable for the marking and line marking of car parks, in the private sector as well as for safety markings in the industry.• gloss level: matt• for interior and exterior use

6/Box

6/Box

750 ml

750 ml

68210 xxxx

colourswhite -0001traffic yellow -0002

68210 xxxx

colourstraffic blue -0003traffic red -0004traffic green -0005

-Aerosol-

-Aerosol-

New

! Markierungswagen AllrounderLine marking trolley for Mipa Linienmarkierer Profi. 32136 0000

New

! Markierungswagen StandardLine marking trolley for Mipa Linienmarkierer Profi 32137 0000

New

!

Schnittkanten ProfilschieneAdd-on parts for extra sharp edges of Mipa Linienmarkierer Profi 7,5 cm

10,0 cm

12,0 cm

32137 0007

32137 0010

32137 0012

New

! MarkierungsstockLine marking trolley for Mipa Linienmarkierer Profi (2-wheel) 32137 0020

New

! MarkierpistoleLine marking pistol for Mipa Linienmarkierer Profi 32137 0021



Mipa Textured Plasters based on dispersion resin


Mipa Reibeputz Universal(Rill plaster) exterior and interior use.Weather resistance according to VOB.Easy to structure • light-fast. Synthetic-resin textured render, for high qualitative weather resistant facade paint work with structure.Groove structure: R 1,5 (1,0 - 1,5 mm)Groove structure: R 2,5 (1,5 - 2,0 mm)Spreading rate depending on substrate, structure and grain:R 1,5 = approx. 2,6 kg/m²R 2,5 = approx. 3,5 kg/m²

2424

25 kg25 kg

69404 001569404 0025

See page 40

Mipa Edelputz (Scratch plaster) exterior and interior use.Decorative render for obtaining a scratched structure. Easy application. Shock and scratch resistant, good diffusion synthetic-resin based render.Surface structure: K2 (1,5 mm) Surface structure: K3 (2,0 mm)Spreading rate depending on substrate, structure and grain:K 2 = approx. 2,7 kg/m² K 3 = approx. 3,6 kg/m²

2424

25 kg25 kg

69407 001569407 0020

See page 41

Mipa Roll- und Spachtelputz Universal exterior and interior use.Weather resistant according to VOB. Easy to model textured render for decorative facade-and interior application. Especially suited for rolling, spraying and application per trowel. Optimal to achieve.Venetian surfaces indoors. Grain size: 1,0 - 1,5 mmSpreading rate depending on substrate and processing: approx. 2,8 kg/m²

5424

10 kg25 kg

69409 000969409 0010

See page 41

New

!

Mipa StreichputzHigh-quality, fine-grained textured plaster with good filling capacity for a decorative and resistant coating of facade and interior walls. Easy application, excellent adhesion, low odour, diffusible, low-strain, and water-based. • colour: white• gloss level: matt• for interior and exterior use• spreading rate: approx. 2-4 m²/ kg

40 15 kg 69470 0006



Mipa Textured Plasters based on silicate resin


Mipa Silikat Edelputz(Scratch plaster) exterior and interior use.Decorative • easy application. Good diffusion, decorative synthetic-resin based plaster for obtaining especially attractive scratch structures.Surface structure: K2 (1,5 mm) Surface structure: K3 (2,0 mm)Spreading rate depending on substrate, structure and grain:K 2 = approx. 2,8 kg/m² K 3 = approx. 3,7 kg/m²

2424

20 kg20 kg

69460 001569460 0020

See page 41

Mipa Silikat-PutzgrundInterior and exterior use.Solvent-, softener-free priming coat for Mipa Silicat Paint and Plaster, free of preserving agents. At best for weather-resistant, structure-equalizing, crack-silting and smooth structured priming. intermediate and final coatings on silicate basis. Spreading rate: approx. 2,5 m²/kg

40 15 kg 65057 0006


Mipa Textured Plasters based on silicone resin


Mipa Silikonharz Edelputz(Scratch plaster) exterior and interior use.Decorative plaster for obtaining a scratched structure. Easy application.Good diffusion silicone-resin based render.Surface structure: K2 (1,5 mm) Surface structure: K3 (2,0 mm)Surface structure: K4 (3,0 mm)Spreading rate depending on substrate, structure and grain:K 2 = approx. 2,7 kg/m² K 3 = approx. 3,6 kg/m² K 4 = approx. 4,2 kg/m²

242424

25 kg25 kg25 kg

69412 001569412 002069412 0030

See page 41

Mipa Full-Shade and Tinting Paint

unit/box. package item. no.

Mipa Vollton- und Abtönfarbe Emulsion paint toner • interior and exterior use • light-faststrong colour. Tinting paint for decorative coatings in and outside (see product information). All shades can be mixed together and can be made lighter adding white wall paint or painted as full-strength colour. Spreading rate: approx. 5 m²/l

10101

250 ml750 ml

2,5 l

65902 xxxx65905 xxxx65907 xxxx

Standard colours see page 36


Mipa Full-Shade and Tinting Paint


Mipa Silikat Vollton- und Abtönfarbe -Last of stock-Weather resistant (DIN 53778).Interior and exterior use • light-fast • good diffusion.Very good opacity for Mipa Silicate paints, plaster and all adherent mineral substrates, for exterior use, too.Spreading rate: approx. 4 m²/l

10 750 ml 65955 xxxx

Standard colours see page 36

Mipa Gloss Coat for interior and exterior use


Mipa Top-FinishScrub resistance class 1. For transparent gloss coating of wall paints and plasters. For interior and exterior. Water-thinnable, high insulating effect. Weathering, UV resistant and extremely abrasion resistant. Optimal to use as an insulating coat for water stains. Class of gloss see product information.Spreading rate: approx. 5 -20 m²/l depending on quantity applied

41

1 l5 l

65005 000165005 0003

Mipa Primers


Mipa Tiefgrund LFSolvent-free, water-thinnable primer, very high depth effect.For interior and exterior use.Transparent, water based special primer to strengthen strong crumbling, chalking and absorbent substrates. Spreading rate: approx. 6 m²/l

6/Box7260

1 l5 l

10 l

65002 000165002 000365002 0005

Mipa Tiefgrund LF KonzentratSolvent-free priming agent concentrate.Very high depth effect, transparent.For interior and exterior use.Mixing ratio:1 part Tiefgrund LF Konzentrat up to 5 parts waterSpreading rate: approx. 6 m²/l (after mixing)

6/Box60

1 l10 l

65003 000165003 0007

Mipa Tiefgrund LHSolvent-based priming agent for exterior use. Strengthens all mineral substrates, solvent-based, transparent, special primer for priming and strengthening for all surface-crumbling substrates. Spreading rate: approx. 6 m²/l

80 5 l 65001 0003


Mipa Primers


Mipa Silikonharz-Tiefgrund LFSolvent-free, siloxan tempered, open cell special groundcoat based on dispersion, for further finishing with silicon resin paints. For interior and exterior use, to consolidate crumbling or chalking sunstrates as well as for controlling the absorbency.Spreading rate: approx. 6m²/l

7260

5 l10 l

65007 000365007 0005

Mipa Silikat-PutzgrundInterior and exterior use. Solvent-, softener-free priming coat for Mipa Silicat Paint and Plaster, free of preserving agents. At best for weather-resistant, structure-equalizing, crack-silting and smooth structured priming, intermediate and final coatings on silicate basis. Spreading rate: approx. 2,5 m²/kg

40 15 kg 65057 0006

Mipa WBS MicroSil Konzentrat Impregnation concentrate based on silicone-resin • water repellent • interior and exterior use. Water-thinnable impregnation for plaster, concrete, exposed brick work, porous concrete and mineral substrates. Mixing ratio: 9 parts water: 1 part WBS MicroSil (see product information).Spreading rate: approx. 4 m²/l (after mixing)

6/Box 1 l 65004 0002

Mipa Putzgrund weiß pigmentiertPrimary coat for Mipa synthetic-resin dispersion plaster.White pigments • interior and exterior use.Water-thinnable, weather resistant, fine texture, adherent and adhesive promoting primer for rubbing, rolling plaster on mineral substrates as well as on lightweight building boards, indoor.Spreading rate: approx. 4 m²/l

60/Pal.40/Pal.

5 l10 l

65144 000365144 0004

See page 40

Mipa Silikat-GipsgrundiermittelReady-to-use, water-based priming agent. For gypsum substrates for the interior use. For subsequent use of paints and rendering, silicate-based. Must be used as primer for rendering containing gypsum, for instance lime-plaster.Spreading rate: For smooth undergrounds 8-10 m²/l

60 10 l 65056 0005

Mipa Kontaktgrund Waterthinnable primery white coat for interior and exterior use. Mipa Kontaktgrund has been developed specifically as excellent adhesion promoter and absorbency control by grounding the mineral substrates and stable old coatings. Spreading rate: approx. 5 m²/l

6024

5 l15 l

65010 000265010 0005


Mipa Filler

unit/box package item. no.

Mipa Füll- und GlättspachtelSelf-adhesive filler and trowelling compound.For interior use • easy to process Self-adhesive powder based screeding and trowelling compound, used to level and fill cracks, holes, gaps in plaster, brick work and lightweight building boards. Also suitable as modelling filler.Spreading rate: depending on texture

1041

1,5 kg5 kg

25 kg

69305 000269305 000369305 0005

MipamurHigh solid concrete sealing agent for pre-cast concrete walls and other absorbent mineral substrates.For interior use • Also suitable as Mosaic (gypsum) construction board sealer.Spreading rate: depending on texture

1 25 kg 69310 0005

Mipa Füllspachtel außenFilling and trowelling compound, based on cement. For exterior use. Easy to process • powder based. Self-adhesive trowelling compound for the filling and levelling of cracks and holes, the joining and sealing of plaster, brick work, concrete and porous concrete.Spreading rate: dependent on texture

124

1 kg5 kg

69355 000169355 0003

Mipa Sealing Agents


Mipa Acryl A 100 weißSealing compound based on acrylate-dispersion for interior and exterior use. Elastic • can be over-coated.Filling sealing compound, for the decorative sealing of connecting joints, on doors, windows, walls and ceilings. Spreading rate: dependent on depth / width of the joints

12 310 ml 69001 0001

Miparit A 110Acrylate-dispersion, fine grained sealing compound interior and exterior use.Elastic • can be over-coated.Pearl white, filling and structured compound sealer. Enables the sealing / filling of cracks and joints in the structure and grain of the brickwork.Spreading rate: dependent on depth / width of joints

12 310 ml 69002 0000

Mipa Polyurethan PU 4001K-Polyurethane sealing compound • interior and exterior use• UV-stable • for mineral substrates • can be over-coated. This quality originaties from the automotive industry and is also perfectly suitable for the joining of expansion and connecting joints on plasters, concrete and brickwork. See product information!Spreading rate: dependent on depth / width of the joints

grey12

white12

black12

310 ml

310 ml

310 ml

26600 0000

26601 0000

26602 0000


Protective Aids


Mipa Fungizid Konzentratwhite • for interior or exterior use • 100 ml concentrated active ingredients must be diluted with 200 ml of water in order to be able to stir homogeneously in 10-15 l interior wall paint or facade paint. Includes an appropriate mixing cup.Special admixture with encapsulated chemical agents for simple and lasting protection against microbial infestation. For water- based products such as emulsion paint and silicone resin paint, wallpaper paste and glue-bound distemper. Eminently suited for remedial action of grounds in case of fungal, algae or moss attack. See product information!Spreading rate: approx. 8 -12 m²/l

12 100 ml 68801 0002

Mipa Graffiti SchutzPreventive protection against potential Graffiti attack. UV-resistant • colourless weather resistant. Film forming, preven-tive protection against Graffiti. Prevents the penetration of spray paints on the substrate, through the building of a separation layer. Easy removal of Graffiti by using a high pressure cleaner.Suitable for all mineral substrates.Spreading rate: approx. 5-10 m²/l

72/Pal. 5 l 64001 0003

Graffiti EntfernerSpecial solvent for the removal of undesired Graffition house walls, public / private transport, bridges, road markings, concrete walls and other substrates such as plasters, concrete, glass, stone, tiles, painted and non-painted surfaces. Test substrate before use!Spreading rate: dependent on dirt accumulation approx. 3 m²/l

6 1 l 69901 0001

Mipa Antischimmel-SprayBiodegradable anti-mould spray. Interior and exterior use. Anti-mould pump-spray with preventive action. Environment friendly, biodegradable, anti-mould pump spray for the trouble free removal of mould, algae and moss attack. Spreading rate: approx. 8-12 m²/l (dependent on the quantity applied)

12 500 ml 69601 0000


Mipa Primers for metal and wood undergrounds


Mipa AllgrundMat special primer for iron, steel, zinc, PVCand aluminium.Interior and exterior use • universal applicationUniversal, light grey, good adhesion, fast drying primer. Suitable for almost every substrate for the successive finishing coat with the usual painting systems.Spreading rate: approx. 10 m²/Litre

662

375 ml750 ml

2,5 l


coloursca. RAL 9010 white -0002ca. RAL 7042 grey -0003

See page 41



Mipa Primers for metal and wood undergrounds


Mipa Metallgrund PremiumUniversal, weather resistant metal primer with corrosion protection for iron and steel. Interior and exterior use, mat. Spreading rate: approx. 8 m²/l

662

375 ml750 ml

2,5 l


coloursca. RAL 8004 red-brown -0001ca. RAL 7032 grey -0003

Mipa ZinkalydZinc-dust primer according to TL 918300, Bl. 4, mat.Universal 1K-zinc-dust primer with high quality rust protection for load bearing objects or steel constructions in- or outdoors. greySpreading rate: approx. 8 m²/l

66

Zink-Spray12

375 ml750 ml

400 ml

60303 000260303 0003

21346 0000

Mipa Zinkausbesserungsfarbesilver greyFor the repair of bare patches on zinc surfaces • interior and exterior use • glossWeather-proof, good adhesive special paint for metal, zinc and aluminium surfaces. For repairs and to obtain zinc-like surfaces.Spreading rate: approx. 6 m²/l

66

Zink-Alu-Spray12

Zink-Ausbessungsspray12

375 ml750 ml

400 ml

400 ml

64030 000264030 0003

68213 5500

68221 0000

Mipa Malervorlack HSProfessional high-solid synthetic-resin undercoat.Highest quality • interior and exterior use ventilatingeasy to sand down • white.Mat, quick drying, easy to sand down. For wood and primed metal. Perfectly suitable as a filler and primary coat for radiators.Spreading rate: approx. 7 m²/l

662

375 ml750 ml

2,5 l

60351 000260351 000360351 0004

See page 41

Mipa WBS Malervorlack Interior and exterior use • satin mat • white.Water-thinnable undecoat for wood and primed metal. Very good opacity, fast drying, easy to sand and good flow.Spreading rate: approx. 7 m²/l

62

750 ml2,5 l

60353 000360353 0004

Mipa Venti HS 3 in 1High-solid alkyd resin paint, white, satin mat, for primary, intermediate and top coat on dimensionally stable and limited dimensionally stable wooden constructional elements. Humidity-adjusting, excellent filling characterictics and edge covering, very good levelling qualities, outstanding adhesion, shock anc impact resistant, hard-wearing, blocking resistant.Spreading rate: approx. 10-12 m²/l

62

750 ml2,5 l

60306 000360306 0004

See page 41



Mipa Metal/Wood Putty


Mipa KH Malerspachtel weißReady to use synthetic-resin putty for interior and exterior use. White, mat.Easy processing, high quality, easy to sand down, good filling power, white, good spreading rate. For the filling and levelling of primed surfaces, as well as wood and metal.Spreading rate: Depending on film-thickness and surface

1212

200 g800 g

60102 000360102 0004

Mipa A 40 Acrylspachtel beigeAcrylic repair-putty in a tube.Interior and exterior use.Fast drying, beige, 1-K acrylic putty for the filling and levelling of primed surfaces, such as wood and metal. Excellent processing and application, quick drying for fast sanding down.Spreading rate: depending on the surface

12 250 g 28925 0001

Mipa P 85 Polyesterspachtel hochweiß Incl. hardener Two-component polyester-putty, extreme white. Filler and finisher for all metallic surfaces. Perfect for the fast filling of scratches. Quick sanding time and re-coating possible. To be used on metal, wood, glass-fibre reinforced plastics and galvanised substrates.Spreading rate: depending on applied quantity

10126

250 g1 kg2 kg

28835 000028831 000028832 0000


Mipa White Enamels


Mipalux HS WeißlackglänzendWhite high-solid enamel for high quality coatings. Interior and exterior use • ventilating • blocking resistantUV-resistant • high opacity • gloss.Weather resistant, optimal levelling qualities, reduced yellowing. White enamel for wood and metal with optimal coverage of edges.Spreading rate: approx. 10 m²/l

662

375 ml750 ml

2,5 l

62507 000062515 000062527 0000

Mipalux HS WeißlackseidenmattWhite high-solid enamel for high quality coatings. Interior and exterior use • ventilating • blocking resistant • UV-resistant • high opacity • satin mat.Weather resistant, optimal levelling qualities, reduced yellowing. White enamel for wood and metal with optimal coverage of edges.Spreading rate: approx. 10 m²/l

662

375 ml750 ml

2,5 l

62607 000062615 000062627 0000



Mipa White Enamels


Mipa WBS Mipalux WeißlackglänzendBrushing varnish on water-base.Interior and exterior use • gloss • UV-resistant • good opacity • ventilating • blocking resistant.Highest quality, high weather resistance, good levelling qualities, optimal drying, reduced yellowing, water-thinnable.Alkyd brushing varnish for wood and grounded metals. To obtain perfect spraying and rolling results. Moisture regulating 2 in 1.Spreading rate: approx. 8-10 m²/l

662

375 ml750 ml

2,5 l

63407 901063415 901063427 9010

Mipa WBS Mipalux Weißlack seidenmattBrushing varnish on water-base.Interior and exterior use • satin mat • UV-resistant • good opacity • ventilating • blocking resistant.Highest quality, high weather resistance, good levelling qualities, optimal drying, reduced yellowing, water-thinnable.Alkyd brushing varnish for wood and grounded metals. To obtain perfect spraying and rolling results. Moisture regulating 2 in 1.Spreading rate: approx. 8-10 m²/l

662

375 ml750 ml

2,5 l

63507 901063515 901063527 9010

Mipa WBS SpraylackInterior and exterior use • satin gloss • white.Top quality, fast drying water based multi coat spray paint, for interior and exterior use. Especially suited for airless application with excellent flow on steel, galvanized steel, aluminium, wood and plastics. As well as for wall and ceilling panels.Spreading rate: approx. 7-8 m²/l

2 5 l 62025 0005

New

!

Mipa WBS Protect PlusMulti-purpose, water-based, anti-blocking paint based on pure acrylic resin dispersion for especially high-quality intermediate and top coating. For interior and exterior use. Very good vertical stability and excellent flow at once. To be applied with brush and spray gun. • Colour: white• gloss level: satin matt• interior and exterior use• Spreading rate: approx. 7 m²/l

2 5 l 62026 0005

Mipa Heizkörperlack weißStrong heat resistant, fast drying, white enamel. Very good opacity, gloss, odourless.Good levelling qualities, reduced yellowing, white enamel, good coverage of edges and good opacity for painting radiators. Yellowing resistant up to 120° C.Spreading rate: approx. 14 m²/l

662

Heizkörperlack-Spray6

375 ml750 ml

2,5 l

400 ml

62020 000262020 000362020 0004

68212 0000

Mipa WBS Heizkörperlack weißGlossy, low in odour, reduced-emission, water-thinnable, non-yellowing and fast drying, for intermediate and final coat.Yellowing resistant up to 120° C.Spreading rate: approx. 12 m²/l

66

375 ml750 ml

62022 000262022 0003



Mipa Coloured Enamels


Mipalux HS Buntlack glänzendHigh-Solid alkyd-resin enamel for high quality coatings • interior and exterior use • good opacity • UV-resistant • ventilating blocking resistant • gloss • high weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd resin enamel for wood, doors and metal. To obtain perfect spraying or rolling results. Standard colours see page 34.Spreading rate: approx. 10 m²/ l depending on substrate and method of application

6662

100 ml375 ml750 ml

2,5 l

62702 xxxx62707 xxxx62715 xxxx62727 xxxx

See page 41

Mipalux HS Buntlack seidenmattHigh-Solid alkyd-resin enamel for high quality coatings • Interior and exterior use • good opacity • UV-resistant • ventilatingblocking resistant • satin mat • high weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd resin enamel for wood, doors and metal. To obtain perfect spraying or rolling results. Standard colours see page 34.Spreading rate: approx. 10 m²/ l depending on substrate and method of application

662

375 ml750 ml

2,5 l


See page 42

Mipa WBS Mipalux Buntlack glänzendWater-thinnable, universal multi-coloured • Alkyd-resin enamelUV-resistant • interior and exterior use • good opacity blocking resistant • gloss • cobalt-free.Environmental neutral, free from harmful substances, universal enamel for doors, windows and all the usual types of wood. For the painting of radiators. Moisture regulating 2 in 1.Standard colours see page 34.Spreading rate: approx. 8-10 m²/l depending on substrate and method of application

662

375 ml750 ml

2,5 l


See page 42

Mipa WBS Mipalux Buntlack seidenmattWater-thinnable, universal multi-coloured • Alkyd-resin enamel • UV-resistant • interior and exterior use • good opacity blocking resistant • satin mat • cobalt-free.Environmental neutral, free from harmful substances, universal enamel for doors, windows and all the usual types of wood. For the painting of radiators. Moisture regulating 2 in 1.Standard colours see page 34.Spreading rate: approx. 8-10 m²/l depending on substrate and method of application

662

375 ml750 ml

2,5 l


See page 42

Mipa WBS PU-Buntlack glänzendWater-thinnable, PU-boosted acrylic multi-coloured enamel.UV-resistant • interior and exterior use • good opacity • blocking resistant • gloss.Environmental neutral, free from harmful substances, universal enamel for doors, windows and all the usual types of wood. For the painting of radiators, as well as on plasters and concrete. Standard colours see page 35.Spreading rate: approx. 8-10 m²/l depending on substrate and method of application

662

375 ml750 ml

2,5 l


See page 42



Mipa Coloured Enamels


Mipa WBS PU-Buntlack seidenmattWater-thinnable, PU-boosted acrylic multi-coloured enamel.UV-resistant • interior and exterior use • good opacity • blocking resistant • satin mat.Environmental neutral, free from harmful substances, universal enamel for doors, windows and all the usual types of wood. For the painting of radiators, as well as on plasters and concrete. Standard colours see page 35.Spreading rate: approx. 8 -10 m²/l depending on substrate and method of application

662

375 ml750 ml

2,5 l


See page 42

Mipa Floor Coatings


Mipa WBS 2K-PU FußbodensiegelYellowing resistant clear coat with UV-protection, satin gloss. Water-thinnable, 2K-sealing wax with good filling power and good mechanical resistance. Suitable for fork-lift trucks. Perfectly suited as final coating for the Mipa WBS 2K-Fußbodenfarbe or Mipa Flock Chips flocked surface.Mixing ratio: 4 parts WBS 2K-Fußbodensiegel : 1 part WBS PU hardener.Spreading rate: approx. 5 m²/kg

Gebinde incl. Härter = 5 kg1


5 kg

15 kg

68536 0001

68561 0001

Mipa WBS 2K-EP FußbodenfarbeTwo-component epoxy-resin floor paint.RAL 7032, mat.High mechanical and chemical resistance.Water-thinnabe 2K-Epoxy resin floor paint for concrete. Good chemical and mechanical resistance for the use in garages, warehousing. Plasticiser proof and suitable for fork-lift traffic! Mixing ratio: 4:1 with hardenerSpreading rate: approx. 4 m²/kg



5 kg

15 kg

68540 7032

68562 7032

Further colours available by the tinting system Mipa Pro Mix® Aqua.

Mipa Betonacryl Satin gloss, concrete paint for floors.Interior and exterior use • fast drying.One-component, solvent based, acrylic coating for concrete floors in workshops, hobby rooms and cellars.Not plasticiser proof!Not suitable as substrate for fork-lift trucks!Spreading rate: approx. 9 m²/l

621

750 ml2,5 l10 l


coloursRAL 7001 -7001RAL 7032 -7032

Further colours as AY 210-30 and AY 210-90 available by tinting system Mipa Pro Mix® Industry.


Mipa Floor Coatings


Mipa WBS BetonfarbeSatin gloss concrete paint for floors.Interior and exterior use • fast drying.One-component, water-thinnable, acrylic coating for concrete floors in workshops hobby rooms and cellars.Not plasticiser proof!Not suitable as substrate for fork-lift trucks!Spreading rate: approx. 11 m²/l

621

750 ml2,5 l

5 l


coloursRAL 7001 -7001RAL 7032 -7032

See page 42

Mipa E 90Interior and exterior use, mat.2K-Epoxy-putty for filling of cracks, wholes and for adjusting small bumpiness of floor pavement and concrete floor. Subsequently treatment with Mipa 2K EP floor paint products such as Mipa EP 275-70 Floor Paint or Mipa WBS 2K-EP Floor Paint. Mixing ratio: 2:1 with Mipa hardener EP (by weight)Spreading rate: dependent on depth / width of the joints and cracks

6

Mipa Hardener EP normal12

1 kg

500 g

29211 0000

29210 0000

Mipa Grip-SubstratTo sprinkle into Mipa 1K- and 2K-floor coatings. Fine grain substrate in order to obtain a non-slip surface.Spreading rate: depending on the field of application

6 800 g 68901 0000

Mipa WBS Ölstopp H67 TankraumfarbeOil sealer with Test sign P-57.068.Water-thinnable, mat, very high quality paint for coatings of composition floors, concrete and roughcast surfaces from fuel oil collection basins and fuel oil storage rooms.See product information!Spreading rate: approx. 1 m²/900 ml for primary, intermediate and top coat

coloursca. RAL 7030 light grey

1

ca. RAL 7005 mouse grey1

5 l

5 l

68040 0001

68040 0002


Mipa Wood-Impregnation / Primers


Mipaxyl SpezialHigh quality moisture regulating film protection for impregnation.Exterior use • colourless, satin mat.Regulating wood preservative primer, with active prevention against blue stain. Perfectly suited for areas which are exposed to weathering. Optimal as primary coat for Mipaxyl wood preserva-tive glazes.Spreading rate: approx. 10 m²/l

6New! 2

2

1 l2,5 l

5 l

61001 000361001 000561001 0004



Mipa Wood-Impregnation / Primers


Mipa WBS HolzschutzgrundWater-thinnable colourless woodPreservative primer • exterior use, satin mat, water-based, odour-less, preventive, wood preservative primer with preventive film protection against blue stain. Suitable for all absorbent customary types of wood. Optimal as primary coat for Mipa WBS Holzlasur, white and multi-coloured lacquers.Spreading rate: approx. 9-10 m²/l

41

1 l3 l

61050 000261050 0003

Mipa WBS IsoliergrundSpecial primer for wood • mat • interior and exterior use • optimal processing.Very good opacity, white primer, which effectively reduces the penetration of the coloured contents in the wood.Spreading rate: approx. 8 m²/l

62

40/Pal

Isoliergrund-Spray6/Box

750 ml2,5 l10 l

400 ml

60503 000260503 000360503 0050

68231 0000


Mipa Wood Preservative Stain


Mipaxyl ALS FlächenlasurRespiratory active long-term protection.Exterior use • long term film protection against blue stain is effective agains wood discolorations and destructions caused by mould. Water repellent, satin gloss. Professional, good weather resistance, UV-resistant, open-cell wood preservative for windows, doors and fences. Optimal coating structure see product information. Standard colours see page 35.Spreading rate: approx. 14-18 m²/l

622

750 ml2,5 l

5 l


See page 42

Mipaxyl GELThixotropic alkyd-resin glaze.Exterior use • non-drip • preventive film protection against blue stain, satin gloss.Open-cell, transparent, good weather resistance, moisture regulating, water repellent wood preservative with high UV-protection for windows and doors. Suitable for all customary types of wood. Standard colours see page 35.Spreading rate: approx. 10-12 m²/l

622

750 ml2,5 l

5 l


See page 43

Mipaxyl NordicOpen cell, biocide-free, weather resistant. High Solid glazing for highly stressed dimensionally stable and not dimensionally stable wood constructions. Perfectly suitable for full shade coatings corresponding to Scandinavian design. Standard colours see page 36.Spreading rate: approx. 14-18 m²/l

622New!

750 ml2,5 l

5 l


See page 43





Mipaxyl Natural SilverWaterborne, breathable, biocide-free, drip resistant wood glazing. Imitates the natural greying of wood and is perfect for the modern design of wooden surfaces. Tintable with Pro Mix® Decorative.Standard colours see page 35.Spreading rate: approx. 10-12,5 m²/l

New! 6 750 ml 60915 xxxx

See page 43

Mipaxyl UV-ProtectionColourless high-solid thickfilm glaze.Exterior and interior use • UV-resistant weather resistantbiocide-free, satin gloss.Especially suitable for the preservation of natural types of wood outdoors. The original colour of the wood remains the same also with refurbishment coatings.Only to be used as a coating system. See product information.Spreading rate: approx. 12-16 m²/l

62

750 ml2,5 l

61315 000061327 0000

Mipa WBS Satin-WachsWaterbased mat wax-paint, diffusible, for refining high-quality wood-surfaces. For interior use, only. Velvetlike, water repellent product for protecting and upkeeping a natural character of wood. Can be coated with Mipa Holzschutzlasur at any time.Spreading rate: approx. 10-15 m²/l

white62

transparent B1

750 ml2,5 l

61335 000261337 0002

-0001

See page 43

Mipa WBS HolzlasurWaterbased glaze for exterior and interior use • blocking resistant biocide-free • thixotropic.Resistant to saliva and perspiration-proof. Satin gloss, drop- reduced wood preservative stain with high UV-protection for optimal long-term protection on wood panels, soffits and fences. Also suited for interior wooden ceilings.Standard colours see page 36.Spreading rate: approx. 10-12,5 m²/l

62

750 ml2,5 l

61615 xxxx61627 xxxx

See page 43


Mipa Weather Protection Paint


Mipa M-HolzlasurClassic deep penetrating impregnation exterior and interior use.Satin gloss • UV-protection transparent • blocking resistant • biocide-free. Open-cell weather resistant, moisture regulating wood preserva-tive for the use on all customary types of wood.Standard colours see page 36.Spreading rate: approx. 8-10 m²/l

622

750 ml2,5 l

5 l




Mipa Weather Protection Paint


Mipa WBS WetterschutzfarbeInterior and exterior use, satin mat.Primary and top coat, water-thinnable, low in odour, scrub resistant according to DIN 53778, weatherproof according to VOB part C DIN 18363.Special enamel for wood coatings on dispersion basis. For wood coatings subjected to normal conditions (roof soffits, fences, palisades, parapets, panel ceiling), hard PVC, galvanised metal plate (eaves gutters), mineral undergrounds. For brushing, rolling, spraying. Wood ingredients and rust are isolated.Standard colours see page 36.Spreading rate: approx. 7 m²/l

62

750 ml2,5 l


See page 43

Mipa Wood Sealer for floors, parquets


Mipadur HS Holzsiegel Interior and exterior use • hard wearing. Universal high-solid urethane-resin based clear coat.For parquet, floors and furniture. Also suitable as spar varnish for wooden boats. Good top-coat varnish for wood work, especially for moderate parts.Spreading rate: approx. 13 m²/l

gloss662

satin mat662

375 ml750 ml

2,5 l

375 ml750 ml

2,5 l

64707 000164715 000164726 0001

64707 000264715 000264726 0002

Mipa WBS Parkettsiegel farblosHighly resistant parquet sealing-varnish.Satin gloss / satin-mat • transparent • water-thinnable.Easy processing floor sealing varnish for all customary types of wood. Extremely tread resistant also suited for stairs. Can be used as furniture and professional wood varnish.Spreading rate: approx. 7-9 m²/l

satin gloss621

satin mat621

750 ml2,5 l10 l

750 ml2,5 l10 l

64815 000264827 000264850 0002

64815 000364827 000364850 0003


Mipa Thick Film Coating


Mipa Eisenglimmer KH-DickschichtfarbeFor interior and exterior use • satin mat.High weather-resistant mica thickfilm coating synthetic-resin based with high anti-corrosive protection for primed steel, iron, zinc and aluminium surfaces. Especially for the use on bridges, lamp posts, bitts (see product information).Spreading rate: approx. 5 m²/l

62

750 ml2,5 l


coloursDB 701 -0701DB 703 -0703

Further colours as AK 555-20 available by the tinting system Mipa Pro Mix® Industry.



Mipa Thick Film Coating


Mipa VC 250-30 DickschichtlackHigh quality, thick-film coating • satin mat • interior and exterior use.According to TL 918 300, Page 77.For brushing, rolling and spraying. For the coating of constructions such as warehousing, piping, gates, wall and ceiling panelling, roofs, steel containers, galvanised steel, aluminium and PVC, mineral substrates such as concrete, composition flooring etc.Spreading rate: approx. 3-3,5 m²/kg

611

1 kg5 kg

20 kg

Further colours as VC 250-30 available by the tinting system Mipa Pro Mix® Industry.

Mipa PU 250-30 seidenmatt (satin mat)Mipa PU 250-50 halbglänzend (semi gloss)Mipa PU 250-70 seidenglänzend (satin gloss)Mipa PU 250-90 glänzend (gloss)2K-Streichlack Two-component polyurethane-acrylic-paint for brushing and rolling • interior and exterior use • thick-film quality.Thick-film, highest quality, good levelling qualities, two-component polyurethane-acrylic-enamel with long open-time for the high quality coating of doors, windows, facades, machinery and constructions on steel, aluminium and galvanised surfaces. Also suitable for the application by spray!MR: 10:1 by weight / 8:1 by volume.Hardener: Mipa PUR Plus-Härter A 60.Spreading rate: approx. 5,2-5,8 m²/kg

PU 250-506

PU 250-30/50/70/9011

1 kg

5 kg20 kg

Further colours as PU 250-30, PU 250-50, PU 250-70 and PU 250-90 available by the tinting system Mipa

Pro Mix® Industry.


Mipa Effect Coatings


Mipa Hammerschlag-EffektlackQuality enamel for hammer finish effects and corrosion protection. Satin gloss.Interior and exterior use • ready to spray.Resistant, good hiding qualities, special paint for effective coatings on all primed metals and other primed surfaces. Especially used for tool boxes, machines, trellis and post-box.Spreading rate: approx. 11 m²/l

62

750 ml2,5 l


colours: available sizes:HK 110 silver grey -0110 750 ml + 2,5 lHK 150 blue -0150 750 mlHK 165 black silver -0165 750 mlHK 170 reseda green -0170 750 mlHK 180 anthracite -0180 750 ml

Mipalux HS Silber-MetallicHigh-Solid alkyd-resin silver enamel for high quality coatings.Interior and exterior use • good opacity, satin mat. High weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd-resin enamel for wood, metal to obtain a decorative surface.Spreading rate: approx. 12 m²/l

6662

100 ml375 ml750 ml

2,5 l

62411 000162411 000262411 000362411 0004

Mipalux HS GoldlackHigh-Solid alkyd-resin gold stoving varnish for high quality coatings for interior and exterior use • good opacity, satin mat.High quality, high weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd-resin enamel for wood, metal. To obtain a decorative gold surface.Spreading rate: approx. 10-14 m²/l

666

100 ml375 ml750 ml

62406 000162406 000262406 0003



Mipa Effect Coatings


Mipalux HS Kupfer-FarbeHigh-Solid alkyd-resin enamel (copper paint) for high quality coatings. Interior and exterior use, good opacity, gloss. High quality, high weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd-resin enamel for wood, metal as exterior coat for drain pipes / guttering. Shade: scrap copper.Spreading rate: approx. 12 m²/l

662

375 ml750 ml

2,5 l

62402 000262402 000362402 0004

Mipa WBS PU-Buntlack KupferfarbeWater-thinnable, environment neutral, low-emission, universal, satin mat, blocking resistant scrap copper coloured enamel for doors and windows. Suitable for metal, hard-PVC, as exterior coating of galvanised gutters and all customary types of wood.Spreading rate: approx. 12 m²/l

6 750 ml 63410 0003

Mipalux HS Mattlack schwarzFlat paint, Alkyd-resin enamel for high quality coatings • interior and exterior work • good opacity, mat. High quality, high weather resistance, good levelling qualities, fast drying, reduced yellowing. Alkyd-resin enamel for wood and metal. Colour: black.Spreading rate: approx. 12 m²/l

666

100 ml375 ml750 ml

62102 9005M62107 9005M62115 9005M


Additional Mipa Specialities


Mipatherm high-heat resistanceHigh-heat resistant special lacquer to approx. 800 °C.Interior and exterior use • good opacity • mat.Durable special lacquer for ovens, piping, heating systems, BBQ’s, exhaust pipes and motor parts. Best results are obtained once stoved.Spreading rate: approx. 8-10 m²/l

coloursilver

66

Mipatherm-Spray silver6

colourblack

66

Mipatherm-Spray black6

100 ml375 ml

400 ml

100 ml375 ml

400 ml

64501 000164507 0001

21236 0001

64501 000264507 0002

21236 0002

Mipa Pool Ruc SchwimmbeckenfarbeChlorinated-rubber paint for swimming pools • interior and exterior use • satin gloss.Without chlorine paraffine. On chemically strained surfaces.Special coating for the use on primed metal, concrete, rendering and cement. Used for new or renovating coats of swimming pools.Spreading rate: approx. 3,5-5,5 m²/l

colourcaribbean blue

621

750 ml2,5 l

20 kg bfn

64115 095064127 095064170 0950

Further colours as RC 250-70 available by the tinting system Mipa Pro Mix® Industry.



Additional Mipa Specialities


Mipa Schultafellack Mild odour • hard-wearing • mat.Special, non-reflecting, very smooth flowing, fast drying, good covering blackboard paint for school blackboards, table tennis tables. Suitable for many pre-treated and primed surfaces such as wood (plywood or chipboard) hardboard / fibre board and metal.Spreading rate: approx. 11 m²/l

coloursgreen dull

66

black dull66

375 ml750 ml

375 ml750 ml

64907 000164915 0001

64907 000264915 0002

Mipa ZaponlackInterior and exterior use • UV-resistant • gloss. Acrylic clearcoat for metal and non ferrous metals. Colourless, yellowing resistant clearcoat. Prevents the build up of patina on copper or the blackening of aluminium. Spreading rate: approx. 13 m²/l

662

375 ml750 ml

2,5 l

64020 000264020 000364020 0004

Mipa MarkierungssprayMat signing spray for building industry and forestry • fluorescent pigments • fast drying.Excellent adhesion, even on absorbing and wet surfaces. High solid share and high colour shade stability (no yellowing or fading). Suited for marking, identification and labelling operations.

12/Box 500 ml 21160 xxxx

coloursred -0002blue -0005



Mipa Rust Converter / Paint Remover / Zinc Cleaner


Mipa Entroster E 900 RostumwandlerFor the direct application on rust.Interior and exterior use.Low viscosity, phosphatising, transparent rust converter. After the application, the rust will be converted and afterwards the object has to be washed over with water. The application of anti-corrosive paint is absolutely vital.Spreading rate: approx. 30 m²/l

662

500 ml1 l5 l

60001 000260001 000360001 0005

Miparox RostschutzemulsionFor the direct application on rust, grey.Rust converter • interior and exterior use.Water-based, black anti-corrosive paint. After the drying process it builds a mineral protection layer, and at the same time acts as a primer, which can be recoated with standard finishing paints.No running-off on vertical areas.Spreading rate: approx. 15 m²/l

1Display=

20 pcs6

100 ml

100 ml1 l

60002 0000

60002 000160002 0003

Miparox Anti-Rost-Spray 6 400 ml 68201 0000

Mipa Abbeizfluid Quick-Plus CKW-freiHigh-quality CHC-, n-methylpyrrolidone- and aromatic-free, white-transparent paint remover in paste form with a very long open time. For the removal of old paints on oil, nitro or synthetic resin basis, matting, latex and dispersion paints, adhesive residue, filling compounds and polyurethane-foam residue on all common substrates like stone, wood and metal.Spreading rate: approx. 400-600 g/m²

64

750 g2,5 kg

69903 000269903 0003

Mipa Zinkreiniger Water thinnable • fast residence time.Easy application. Transparent, wetting agent cleaner for zinced surfaces. For cleaning and degreasing of the following coating, in order to avoid problems during the intercoat adhesion on galvanised surfaces.Spreading rate: approx. 10-12 m²/l

6 1 l 69804 0000

Thinners for Mipa Building Enamels


Mipa KH-VerdünnungSynthetic thinner, inflammable, free of aromates, odourless for all synthetic resin paints, flammable.

64

1 l5 l

27251 000027255 0000

Mipa Verdünnung UNHigh quality solvent used for diluting, cleaning and dissolving of synthetic resin paints. Especially suited as spraying thinner, highly flammable.

641

1 l5 l

30 l

27181 000027185 000027188 0000

Mipa NitroverdünnungHigh quality solvent used for diluting, cleaning and dissolving of synthetic resin paints. Also suitable as cleaning agent prior to the standard coating process, highly flammable.

1212

500 ml1 l

69802 000169802 0002


Thinners for Mipa Building Enamels


Mipa TerpentinersatzHigh quality solvent used for diluting, cleaning and dissolving of synthetic resin paints, flammable.

12121

500 ml1 l6 l

69803 000169803 000269803 0005

Mipa UniversalverdünnungSolvent for the cleaning of brushes,spray guns, and other tools, flammable.

41

5 l30 l

69805 000469805 0007

Mipa AcetonDissolvent to clean and degrease of metal parts. Can be used also as thinner for natural/synthetic resins and for nitro/nitrocellulose combination lacquer. Highly flammable.

64

1 l5 l

69810 000269810 0004

Colour Swatches

item. no.

Mipa StrukturputzeSample Folder 25297 0010

Mipa Farbtonkarte HolzlasurenFolded Colour Card 25262 0010

Mipa Farbtonkarte M-HolzlasurFlyer DIN A4 Print 25281 0000

Mipa Farbtonkarte Vollton- und AbtönfarbenFolded Colour Card 25260 0000


Colour register / Standard colours Mipa Decorative Products

Mipalux HS Buntlack

Mipalux HS Buntlack glänzend (See page 23)

Mipalux HS Buntlack seidenmatt (See page 23)

Farbton 100 ml 375 ml 750 ml 2,5 l 375 ml 750 ml 2,5 l

RAL 1021 rapsgelb 62702 1021 62707 1021 62715 1021 62727 1021 62807 1021 62815 1021 62827 1021

RAL 3000 feuerrot 62702 3000 62707 3000 62715 3000 62727 3000 62807 3000 62815 3000 62827 3000

RAL 5010 enzianblau 62702 5010 62707 5010 62715 5010 62727 5010 62807 5010 62815 5010 62827 5010

RAL 5014 taubenblau 62702 5014 62707 5014 62715 5014 62727 5014 62807 5014 62815 5014 62827 5014

RAL 5015 himmelblau 62702 5015 62707 5015 62715 5015 62727 5015 62807 5015 62815 5015 62827 5015

RAL 6001 smaragdgrün 62702 6001 62707 6001 62715 6001 62727 6001 62807 6001 62815 6001 62827 6001

RAL 6005 moosgrün 62702 6005 62707 6005 62715 6005 62727 6005 62807 6005 62815 6005 62827 6005

RAL 6011 resedagrün 62702 6011 62707 6011 62715 6011 62727 6011 62807 6011 62815 6011 62827 6011

RAL 7001 silbergrau 62702 7001 62707 7001 62715 7001 62727 7001 62807 7001 62815 7001 62827 7001

RAL 7032 kieselgrau 62702 7032 62707 7032 62715 7032 62727 7032 62807 7032 62815 7032 62827 7032

RAL 7035 lichtgrau 62702 7035 62707 7035 62715 7035 62727 7035 62807 7035 62815 7035 62827 7035

RAL 8011 nussbraun 62702 8011 62707 8011 62715 8011 62727 8011 62807 8011 62815 8011 62827 8011

RAL 8017 schokoladenbraun 62702 8017 62707 8017 62715 8017 62727 8017 62807 8017 62815 8017 62827 8017

RAL 9001 cremeweiß 62702 9001 62707 9001 62715 9001 62727 9001 62807 9001 62815 9001 62827 9001

RAL 9005 tiefschwarz 62702 9005 62707 9005 62715 9005 62727 9005 62807 9005 62815 9005 62827 9005

RAL 9010 reinweiß 62702 9010 62707 9010 62715 9010 62727 9010 62807 9010 62815 9010 62827 9010

Mipa WBS Mipalux Buntlack

Mipa WBS Mipalux Buntlack glänzend (See page 23)

Mipa WBS Mipalux Buntlack seidenmatt (See page 23)

Farbton 375 ml 750 ml 2,5 l 375 ml 750 ml 2,5 l

RAL 1021 rapsgelb 63407 1021 63415 1021 63427 1021 63507 1021 63515 1021 63527 1021

RAL 3000 feuerrot 63407 3000 63415 3000 63427 3000 63507 3000 63515 3000 63527 3000

RAL 5010 enzianblau 63407 5010 63415 5010 63427 5010 63507 5010 63515 5010 63527 5010

RAL 5014 taubenblau 63407 5014 63415 5014 63427 5014 63507 5014 63515 5014 63527 5014

RAL 5015 himmelblau 63407 5015 63415 5015 63427 5015 63507 5015 63515 5015 63527 5015

RAL 6001 smaragdgrün 63407 6001 63415 6001 63427 6001 63507 6001 63515 6001 63527 6001

RAL 6005 moosgrün 63407 6005 63415 6005 63427 6005 63507 6005 63515 6005 63527 6005

RAL 6011 resedagrün 63407 6011 63415 6011 63427 6011 63507 6011 63515 6011 63527 6011

RAL 7001 silbergrau 63407 7001 63415 7001 63427 7001 63507 7001 63515 7001 63527 7001

RAL 7032 kieselgrau 63407 7032 63415 7032 63427 7032 63507 7032 63515 7032 63527 7032

RAL 7035 lichtgrau 63407 7035 63415 7035 63427 7035 63507 7035 63515 7035 63527 7035

RAL 8011 nussbraun 63407 8011 63415 8011 63427 8011 63507 8011 63515 8011 63527 8011

RAL 8017 schokoladenbraun 63407 8017 63415 8017 63427 8017 63507 8017 63515 8017 63527 8017

RAL 9001 cremeweiß 63407 9001 63415 9001 63427 9001 63507 9001 63515 9001 63527 9001

RAL 9005 tiefschwarz 63407 9005 63415 9005 63427 9005 63507 9005 63515 9005 63527 9005

RAL 9010 reinweiß 63407 9010 63415 9010 63427 9010 63507 9010 63515 9010 63527 9010

Further colours / colour series of all here mentioned Mipa qualities available by tinting system Pro Mix® Decorative.



Mipa WBS PU-Buntlack

Mipa WBS PU-Buntlack glänzend (See page 23)

Mipa WBS PU-Buntlack seidenmatt (See page 24)

Farbton 375 ml 750 ml 2,5 l 375 ml 750 ml 2,5 l

RAL 1021 rapsgelb 63107 1021 63115 1021 63127 1021 63307 1021 63315 1021 63327 1021

RAL 3000 feuerrot 63107 3000 63115 3000 63127 3000 63307 3000 63315 3000 63327 3000

RAL 5010 enzianblau 63107 5010 63115 5010 63127 5010 63307 5010 63315 5010 63327 5010

RAL 5014 taubenblau 63107 5014 63115 5014 63127 5014 63307 5014 63315 5014 63327 5014

RAL 5015 himmelblau 63107 5015 63115 5015 63127 5015 63307 5015 63315 5015 63327 5015

RAL 6001 smaragdgrün 63107 6001 63115 6001 63127 6001 63307 6001 63315 6001 63327 6001

RAL 6005 moosgrün 63107 6005 63115 6005 63127 6005 63307 6005 63315 6005 63327 6005

RAL 6011 resedagrün 63107 6011 63115 6011 63127 6011 63307 6011 63315 6011 63327 6011

RAL 7001 silbergrau 63107 7001 63115 7001 63127 7001 63307 7001 63315 7001 63327 7001

RAL 7032 kieselgrau 63107 7032 63115 7032 63127 7032 63307 7032 63315 7032 63327 7032

RAL 7035 lichtgrau 63107 7035 63115 7035 63127 7035 63307 7035 63315 7035 63327 7035

RAL 8011 nussbraun 63107 8011 63115 8011 63127 8011 63307 8011 63315 8011 63327 8011

RAL 8017 schokoladenbraun 63107 8017 63115 8017 63127 8017 63307 8017 63315 8017 63327 8017

RAL 9001 cremeweiß 63107 9001 63115 9001 63127 9001 63307 9001 63315 9001 63327 9001

RAL 9005 tiefschwarz 63107 9005 63115 9005 63127 9005 63307 9005 63315 9005 63327 9005

RAL 9010 reinweiß 63107 9010 63115 9010 63127 9010 63307 9010 63315 9010 63327 9010

Mipaxyl ALS Flächenlasur (See page 26)

Farbton 750 ml 2,5 l 5 l

1010 weiß 61115 1010 61127 1010 61140 1010

1015 antikweiß 61115 1015 61127 1015

1020 birke 61115 1020 61127 1020

1025 eiche hell 61115 1025 61127 1025 61140 1025

1030 esche 61115 1030 61127 1030 61140 1030

1035 kiefer 61115 1035 61127 1035 61140 1035

1040 lärche 61115 1040 61127 1040

1045 maisgelb 61115 1045 61127 1045

1050 eiche 61115 1050 61127 1050

1055 treibholz 61115 1055 61127 1055

1060 teak 61115 1060 61127 1060

1065 mahagoni 61115 1065 61127 1065

1070 nussbaum 61115 1070 61127 1070 61140 1070

1075 palisander 61115 1075 61127 1075 61140 1075

1080 farblos 61115 1080 61127 1080

Mipaxyl GEL (See page 26)


1010 weiß 61415 1010 61427 1010 61440 1010

1015 antikweiß 61415 1015 61427 1015 61440 1015

1020 birke 61415 1020 61427 1020 61440 1020

1025 eiche hell 61415 1025 61427 1025 61440 1025

1030 esche 61415 1030 61427 1030 61440 1030

1035 kiefer 61415 1035 61427 1035 61440 1035

1040 lärche 61415 1040 61427 1040 61440 1040

1045 maisgelb 61415 1045 61427 1045 61440 1045

1050 eiche 61415 1050 61427 1050 61440 1050

1055 treibholz 61415 1055 61427 1055 61440 1055

1060 teak 61415 1060 61427 1060 61440 1060

1065 mahagoni 61415 1065 61427 1065 61440 1065

1070 nussbaum 61415 1070 61427 1070 61440 1070

1075 palisander 61415 1075 61427 1075 61440 1075

1080 farblos 61415 1080 61427 1080 61440 1080

New! Mipaxyl Natural Silver (See page 27)

Farbton 750 ml

0001 Arbor 60915 0001

0002 Skog 60915 0002

0003 Padura 60915 0003

0004 Silva 60915 0004

Further colours / colour series of all here mentioned Mipa qualities available by tinting system Pro Mix® Decorative.



Mipaxyl Nordic (See page 26)


1010 weiß 61915 1010 61927 1010 61940 1010

1015 antikweiß 61915 1015 61927 1015 61940 1015

1020 birke 61915 1020 61927 1020 61940 1020

1025 eiche hell 61915 1025 61927 1025 61940 1025

1030 esche 61915 1030 61927 1030 61940 1030

1035 kiefer 61915 1035 61927 1035 61940 1035

1040 lärche 61915 1040 61927 1040 61940 1040

1045 maisgelb 61915 1045 61927 1045 61940 1045

1050 eiche 61915 1050 61927 1050 61940 1050

1055 treibholz 61915 1055 61927 1055 61940 1055

1060 teak 61915 1060 61927 1060 61940 1060

1065 mahagoni 61915 1065 61927 1065 61940 1065

1070 nussbaum 61915 1070 61927 1070 61940 1070

1075 palisander 61915 1075 61927 1075 61940 1075

1080 farblos 61915 1080 61927 1080 61940 1080

1090 blau 61915 1090 61927 1090 61940 1090

1095 hellgrau 61915 1095 61927 1095 61940 1095

1100 schwedenrot 61915 1100 61927 1100 61940 1100

Mipa WBS Holzlasur (See page 27)

Farbton 750 ml 2,5 l

1010 weiß 61615 1010 61627 1010

1015 antikweiß 61615 1015 61627 1015

1020 birke 61615 1020 61627 1020

1025 eiche hell 61615 1025 61627 1025

1030 esche 61615 1030 61627 1030

1035 kiefer 61615 1035 61627 1035

1040 lärche 61615 1040 61627 1040

1045 maisgelb 61615 1045 61627 1045

1050 eiche 61615 1050 61627 1050

1055 treibholz 61615 1055 61627 1055

1060 teak 61615 1060 61627 1060

1065 mahagoni 61615 1065 61627 1065

1070 nussbaum 61615 1070 61627 1070

1075 palisander 61615 1075 61627 1075

1080 farblos 61615 1080 61627 1080

Mipa WBS Wetterschutzfarbe (See page 28)

Farbton 750 ml 2,5 l

RAL 1021 rapsgelb 61715 1021 61727 1021

RAL 3000 feuerrot 61715 3000 61727 3000

RAL 5010 enzianblau 61715 5010 61727 5010

RAL 6002 laubgrün 61715 6002 61727 6002

RAL 7001 silbergrau 61715 7001 61727 7001

RAL 8017 schokoladenbraun 61715 8017 61727 8017

RAL 9001 cremeweiß 61715 9001 61727 9001

RAL 9005 tiefschwarz 61715 9005 61727 9005

RAL 9010 reinweiß 61715 9010 61727 9010

Mipa Silikat Vollton- und Abtönfarbe (See page 16)- Last of stock-

Farbton 750 ml

0011 echtgelb 65955 0011

0012 oxidgelb 65955 0012

0013 oxidrot 65955 0013

0014 kobaltblau 65955 0014

0015 echtgrün 65955 0015

0016 umbragrün 65955 0016

0018 oxidschwarz 65955 0018

Mipa M-Holzlasur (See page 27)

Farbton 750 ml 2,5 l 5l

0002 kiefer 61515 0002 61527 0002 61540 0002

0003 teak 61515 0003 61527 0003 61540 0003

0004 nussbaum 61515 0004 61527 0004 61540 0004

0006 kastanie 61515 0006 61527 0006 61540 0006

0007 eiche 61515 0007 61527 0007 61540 0007

0008 palisander 61515 0008 61527 0008 61540 0008

0009 farblos 61515 0009 61527 0009 61540 0009

Mipa Vollton- und Abtönfarbe (See page 15)

Farbton 250 ml 750 ml 2,5 l

0901 ocker 65902 0901 65905 0901 65907 0901

0902 ziegelrot 65902 0902 65905 0902 65907 0902

0903 umbra 65902 0903 65905 0903

0904 schwarz 65902 0904 65905 0904 65907 0904

0905 zigarrenbraun 65902 0905 65905 0905 65907 0905

0906 schokoladenbraun 65902 0906 65905 0906 65907 0906

0907 sonnengelb* 65902 0907 65905 0907 65907 0907

0908 orange* 65902 0908 65905 0908

0909 signalrot* 65902 0909 65905 0909 65907 0909

0910 enzianblau 65902 0910 65905 0910 65907 0910

0913 laubgrün 65902 0913 65905 0913 65907 0913

0914 weiß 65902 0914 65905 0914

0915 weinrot* 65902 0915 65905 0915

0918 ultramarinblau 65902 0918 65905 0918

0923 terrakotta* 65902 0923 65905 0923

0924 frühlingsgrün* 65902 0924 65905 0924 65907 0924

0927 flieder 65902 0927 65905 0927

0935 goldocker/aprikot* 65902 0935 65905 0935 65907 0935

0937 topasbraun 65902 0937 65905 0937

* these colours only in full tone for exterior use!

New!

New!

New!

New!

Further colours for the qualities Mipaxyl Nordic, Mipa WBS Holzlasur and Mipa WBS Wetterschutzfarbe available by tinting system Pro Mix® Decorative.


Pro Mix® Decorative 2015 by Mipa

Price list Binder, Colour Concentrate, Colour Swatches and Accessories



Mipa Pro Mix® Decorative Binder

Mipa Interior Paints based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Mipa Latex Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Mipa Interior Paint based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Mipa Special Interior and Exterior Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Mipa Exterior Paints based on silicone resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Mipa Facade Paints based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Mipa Exterior Paints based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Mipa Primary Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Mipa Textured Plasters based on dispersion resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Mipa Textured Plasters based on silicate resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mipa Textured Plasters based on silicone resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mipa Undercoat Lacquer / Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mipa Coloured Enamels solvent-based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mipa Coloured Enamels whater-thinnable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Mipa Wood Preservative Stain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Mipa Pro Mix® Decorative Colour Concentrates / Colour Swatches 44

Table of contents

Units Binder Mipa Pro Mix® Decorative:

375 ml 6 Units / Box

750 ml 6 Units / Box

2,5 l 2 Units / Box

2,5 l 84 Units / Pallet

5 l 60 Units / Pallet

10 l* 32 Units / Pallet

10 l** 40 Units / Pallet

10 kg 54 Units / Pallet

25 kg 24 Units / Pallet

* pallet quantity for Pro Mix® products** pallet quantity for standard products

Please note that we only guarantee the colour accuracy of the relevant qualities for the products and packaging sizes listed under Pro Mix.®




Pro Mix® Ultima

Basis 1 Basis 2 New Quality! Basis 3 New Quality!67841 002867841 004167841 0051

2,5 l5 l

10 l

New! 67842 002867842 004167842 0051

2,5 l5 l

10 l

New! 67843 002867843 004167843 0051

2,5 l5 l

10 l

New!

See page 5

Pro Mix® Durasan

Basis 1 Basis 2 Basis 367844 0051 10 l New! 67845 0051 10 l New! 67846 0051 10 l New!

See page 5

Pro Mix® Titan Volldecker

Basis 1 Basis 267821 002867821 004167821 0051

2,5 l5 l

10 l

67822 002867822 004167822 0051

2,5 l5 l

10 l

See page 5

Pro Mix® Extra

Basis 1 Basis 2 Basis 367801 001567801 002867814 004167814 0051

750 ml2,5 l

5 l10 l

67802 001567802 002867815 004167815 0051

750 ml2,5 l

5 l10 l

67803 001567803 002867816 004167816 0051

750 ml2,5 l

5 l10 l

See page 5

Mipa Latex Paint

Pro Mix® Latexfarbe seidenglänzend

Basis 1 Basis 2 Basis 367834 004167834 0051

5 l10 l

67835 004167835 0051

5 l10 l

67836 0041 5 l

Mixed colours only for interior use! See page 6

Mipa Interior Paint based on silicate resin

Pro Mix® Innensilikat-Farbe

Basis 1 Basis 267856 004167856 0051

5 l10 l

67857 0041 5 l

See page 7

Mipa Special Interior and Exterior Paint

Pro Mix® House-Paint Universalfarbe, interior and exterior use

Basis 1 Basis 2 Basis 367995 001567995 004167995 0051

750 ml5 l

10 l

67996 001567996 004167996 0051

750 ml5 l

10 l

67997 001567997 004167997 0051

750 ml5 l

10 l

See page 8 + 9

Pro Mix® Silikonharz Innenwandfarbe New!

Basis 1 Basis 267881 0051 10 l 67882 0051 10 l

See page 9




Pro Mix® Mipasan Silikonharzfarbe FE

Basis 1 Basis 267988 002867988 0051

2,5 l10 l

67989 002867989 0051

2,5 l10 l

See page 9

Pro Mix® Fassaden-Silikonharzfarbe

Basis 1 Basis 267982 004167982 0051

5 l10 l 67983 0051 10 l

See page 10


Pro Mix® Fassaden-Füllfarbe

Basis 1 Basis 2 Basis 367909 001567909 002867909 004167909 0051

750 ml2,5 l

5 l10 l

67910 001567910 002867910 004167910 0051

750 ml2,5 l

5 l10 l

67911 001567911 002867911 004167911 0051

750 ml2,5 l

5 l10 l

See page 10

Pro Mix® MipaSil siloxanverstärkt


750 ml2,5 l10 l

67965 001567965 002867965 0051

750 ml2,5 l10 l

67966 001567966 002867966 0051

750 ml2,5 l10 l

See page 10

Mipa Exterior Paints based on silicate resin

Pro Mix® Fassaden-Silikatfarbe

Basis 1 Basis 267956 004167956 0051

5 l10 l 67957 0051 10 l

See page 12

Mipa Primary Coat

Pro Mix® Putzgrund weiß pigmentiert

Basis 165144 000365144 0004

5 l10 l

See page 17

Mipa Textured Plasters based on dispersion resin

Pro Mix® Reibeputz Universal (Rillenputz) Interior and exterior use

Basis 169404 001569404 0025

25 kg25 kg

Rillenstruktur: R 1,5 (1,0 - 1,5 mm)Rillenstruktur: R 2,5 (1,5 - 2,0 mm)

See page 14



Pro Mix® Edelputz (Kratzputz) für außen und innen

Basis 169407 001569407 0020

25 kg25 kg

Strukturoberfläche: K2 (1,5 mm)Strukturoberfläche: K3 (2,0 mm)

See page 14

Pro Mix® Roll- und Spachtelputz Universal Interior and exterior use

Basis 169409 000969409 0010

10 kg25 kg

Körnung: 1,0 – 1,5 mmKörnung: 1,0 – 1,5 mm

See page 14

Mipa Textured Plasters based on silicate resin

Pro Mix® Silikat Edelputz (Kratzputz) Interior and exterior use

Basis 169460 001569460 0020

20 kg20 kg

Strukturoberfläche: K2 (1,5 mm)Strukturoberfläche: K3 (2,0 mm)

See page 15

Mipa Textured Plasters based on silicone resin

Pro Mix® Silikonharz Edelputz (Kratzputz) Interior and exterior use

Basis 169412 001569412 002069412 0030

25 kg25 kg25 kg

Strukturoberfläche: K2 (1,5 mm)Strukturoberfläche: K3 (2,0 mm)Strukturoberfläche: K4 (3,0 mm)

See page 15

Mipa Undercoat Lacquer / Primer

Pro Mix® Malervorlack HS

Basis 167051 001567051 0027

750 ml2,5 l

See page 20

Pro Mix® Venti HS 3 in1


750 ml2,5 l

67012 001567012 0027

750 ml2,5 l

67013 001567013 0027

750 ml2,5 l

See page 20

Pro Mix® Allgrund

Basis 167018 0015 750 ml

See page 19

Mipa Coloured Enamels solvent-based

Pro Mix® Mipalux HS Buntlack glänzend


375 ml750 ml

2,5 l

67312 000767312 001567312 0027

375 ml750 ml

2,5 l

67313 000767313 001567313 0027

375 ml750 ml

2,5 l

See page 23



Pro Mix® Mipalux HS Buntlack seidenmatt


375 ml750 ml

2,5 l

67412 000767412 001567412 0027

375 ml750 ml

2,5 l

67413 000767413 001567413 0027

375 ml750 ml

2,5 l

See page 23

Mipa Coloured Enamels water-thinnable

Pro Mix® WBS Mipalux Buntlack glänzend


375 ml750 ml

2,5 l

67612 000767612 001567612 0027

375 ml750 ml

2,5 l

67613 000767613 001567613 0027

375 ml750 ml

2,5 l

See page 23

Pro Mix® WBS Mipalux Buntlack seidenmatt


375 ml750 ml

2,5 l

67622 000767622 001567622 0027

375 ml750 ml

2,5 l

67623 000767623 001567623 0027

375 ml750 ml

2,5 l

See page 23

Pro Mix® WBS PU-Buntlack glänzend


375 ml750 ml

2,5 l

67502 000767502 001567502 0027

375 ml750 ml

2,5 l

67503 000767503 001567503 0027

375 ml750 ml

2,5 l

See page 23

Pro Mix® WBS PU-Buntlack seidenmatt


375 ml750 ml

2,5 l

67592 000767592 001567592 0027

375 ml750 ml

2,5 l

67593 000767593 001567593 0027

375 ml750 ml

2,5 l

See page 24


Pro Mix® WBS Betonfarbe

Basis 1 Basis 2 Basis 367111 0015 750 ml 67112 0015 750 ml 67113 0015 750 ml

See page 25

Pro Mix® Mipaxyl ALS Flächenlasur

Basis 1 Basis 2 -Last of stock-67202 001467202 002567202 0041

680 ml2,3 l4,6 l New!

67222 001467222 0025

680 ml2,3 l

See page 26



Pro Mix® Mipaxyl GEL

Basis 167203 001467203 002567203 0041

680 ml2,3 l4,6 l New!

See page 26

Pro Mix® Mipaxyl Nordic

Basis 167206 001467206 002567206 0041

680 ml2,3 l4,6 l

New!New!

See page 26

Pro Mix® Mipaxyl Natural Silver

Basis 167225 001467225 0025

680 ml2,3 l New!

See page 27

Pro Mix® WBS Satin-Wachs

Basis 1 transparent61335 000161337 0001

680 ml2,3 l

See page 27

Pro Mix® WBS Holzlasur

Basis 167201 001467201 0025

680 ml2,3 l

See page 27

Pro Mix® WBS Wetterschutzfarbe


750 ml2,5 l

67212 001567212 0027

750 ml2,5 l

67213 001567213 0027

750 ml2,5 l

See page 28


Mipa Pro Mix® Decorative Colour Concentrates / Colour Swatches

unit/ box pack. item. no.

Mipa Pro® Mix Colour Concentrate VOC-free according to DIN 55649

AbstractTinting by using the Mipa Tinting machine which must be equipped accordingly. See Mipa Update 2009 and the subsequent updates. Free of bonding agents, softener and solvents. Optimal pigmentation, low consumption. Coloristic adjusted (colour strength, density), rheologi-cal adjusted.

coloursOxidgelb 050Oxidrot 060Lasurrot 410Echtrot 420Rot 440Oxidweiß 460Ultrablau 501Violett 510Echtmarron 590Echtgelb 600Lasurgelb 610Oxidorange 620Blau 630Oxidblau 631Gelb 640Oxidlemon 650Echtorange 660Grün 680Oxidgrün 681Oxidgrün 682Echtorange 712Schwarz 950Oxidschwarz 955

33333333333333333333333

1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l

67710 005067710 006067710 041067710 042067710 044067710 046067710 050167710 051067710 059067710 060067710 061067710 062067710 063067710 063167710 064067710 065067710 066067710 068067710 068167710 068267710 071267710 095067710 0955

Mipa Pro Mix® Decorative Colour Swatches

Pro Mix® Design 734For all Pro Mix materials, other than Silicate and Silicone-resin paints

Pro Mix® Design 120Especially for Pro Mix Silicate and Silicone-resin paints.

Pro Mix® OperaEspecially for the stable and price-optimized facade design and wall design for interior use.

Pro Mix® NCS Selection Edition 2For all Mipa Pro Mix materials, except silicate and silicone resin paint.

Farbtonfächer RALFor all Pro Mix materials, other than Silicate and Silicone-resin paints.

67799 0001

67799 0002

67799 0004

67799 0003

25201 0000

Pro Mix® Decorative ColorScanColorimeter for colour measurement of most various materials and surfaces.

69731 0000

Allgemeine Lieferungs- und Zahlungsbedingungender Lackindustrie in der vom Bundeskartellamt am 11 . Juli 2003 genehmigten Empfehlung

I. Geltungsbereich1. Unsere nachstehenden Lieferungs- und Zahlungsbedingungen sind nur für die Anwendung gegenüber Unternehmen bestimmt. Gegenüber Verbrauchern finden sie keine Anwendung.2. Unsere Lieferungs- und Zahlungsbedingungen gelten ausschließlich. Entgegenstehende oder von unseren Lieferungs- und Zahlungsbedingungen abweichende Bedingungen des Käufers erkennen wir nicht an, es sei denn, wir hätten ausdrücklich schriftlich ihrer Geltung zugestimmt. Unsere Angebote sind freibleibend, falls nicht ausdrücklich etwas anderes vereinbart wird.3. Nebenabreden, Änderungen und Abweichungen von diesen Bedingungen sollen schrift-lich vereinbart werden.

II. Preise1. Die vereinbarten Preise verstehen sich ab Werk und gelten zuzüglich der am Liefertag geltenden gesetzlichen Mehrwertsteuer.2. Für die Berechnung sind die von uns ermittelten Gewichte, Stückzahlen und Mengen maßgebend, wenn der Käufer nicht unverzüglich, spätestens jedoch binnen 14 Tagen nach Empfang widerspricht.3. Sollten wir während der Dauer der Vertragslaufzeit unsere Preise allgemein ermäßigen oder erhöhen, so kommen für die noch abzunehmenden Mengen die veränderten Preise zur Anwendung. Im Fall der Erhöhung der Preise ist der Käufer berechtigt, unverzüglich, spätes-tens jedoch innerhalb von vier Wochen nach Erhalt der Mitteilung über die Preiserhöhung durch schriftliche Erklärung vom Vertrag zurückzutreten. Der Rücktritt wirkt sich nicht auf Lieferungen aus, die vor der Preiserhöhung erfolgt sind.

III. Anwendungstechnische Beratung1. Soweit wir Beratungsleistungen erbringen, geschieht dies nach bestem Wissen. Alle Anga-ben und Auskünfte über Eignung und Anwendung der gelieferten Waren befreien den Käufer nicht von eigenen Prüfungen und Versuchen. Dies gilt insbesondere, wenn Verdünnungen, Härter, Zusatzlacke oder sonstige Komponenten beigemischt werden, die nicht von uns bezogen wurden.

IV. Lieferung1. Der Käufer hat die Ware zum vereinbarten Liefertermin oder, falls ein Liefertermin nicht fest vereinbart wurde, unverzüglich nach Mitteilung der Bereitstellung am Erfüllungsort gem. Abs. IX. 1 abzuholen. Kommt der Käufer mit der Annahme der Ware in Verzug, sind wir berechtigt, sie nach eigener Wahl auf Kosten des Käufers zu versenden oder – sofern nicht anders möglich, notfalls auch im Freien – zu lagern. Wir haften in diesem Fall nicht für den zufälligen Untergang, den Verlust oder eine Beschädigung der Waren. Im Falle der Lagerung der Ware sind wir berechtigt, die Ware nach Ablauf einer Woche in Rechnung zu stellen.2. Sofern abweichend von Abs. 1 vereinbart ist, dass wir zur Versendung der Ware verpflich-tet sind, erfolgen der Transport auf Kosten des Käufers und die Wahl der Transportmittel so-wie des Transportweges mangels besonderer Weisung nach unserem Ermessen. Die Gefahr geht in dem Zeitpunkt über, in dem die Ware von uns dem Frachtführer übergeben wird.3. Dem Käufer zumutbare Teillieferungen sind zulässig.4. Erhebliche, unvorhersehbare sowie von uns nicht verschuldete Betriebsstörungen, Liefer-fristenüberschreitungen oder Lieferausfälle von unseren Lieferanten sowie Betriebsunterbre-chungen aufgrund von Rohstoff-, Energie- oder Arbeitskräftemangel, Streiks, Aussperrungen, Schwierigkeiten bei der Transportmittelbeschaffung, Verkehrsstörungen, Verfügungen von hoher Hand und Fälle höherer Gewalt bei uns und unseren Unterlieferanten verlängern die Lieferzeit um die Dauer des Leistungshindernisses, soweit sie für die Lieferfähigkeit der Ware von Bedeutung sind. Beginn und Ende derartiger Hindernisse teilen wir dem Käufer unverzüglich mit. Wird hierdurch die Lieferung um mehr als einen Monat verzögert, sind sowohl der Käufer als auch wir unter Ausschluss von Schadenersatzansprüchen berechtigt, hinsichtlich der von der Lieferstörung betroffenen Menge vom Vertrag zurückzutreten. Das gesetzliche Rücktrittsrecht des Käufers für den Fall der Lieferstörung aufgrund eines von uns zu vertretenen Umstands bleibt unberührt.5. Erfolgt die Lieferung in Leihbehältern, so sind diese innerhalb von 90 Tagen nach Erhalt der Lieferung restentleert und frachtfrei zurückzusenden. Verlust und Beschädigung einer Leihverpackung geht zu Lasten des Käufers, wenn dies von ihm zu vertreten ist. Leihverpa-ckungen dürfen nicht anderen Zwecken oder zur Aufnahme anderer Produkte dienen. Sie sind lediglich für den Transport der gelieferten Ware bestimmt. Beschriftungen dürfen nicht entfernt werden.6. Einwegverpackungen werden nicht von uns zurückgenommen, stattdessen nennen wir dem Käufer einen Dritten, der die Verpackungen entsprechend der Verpackungsverordnung einem Recycling zuführt.

V. Zahlung1. Der Rechnungsbetrag ist innerhalb von 30 Tagen nach Rechnungsdatum ohne Abzug zu zahlen. Rechtzeitige Zahlung ist nur dann erfolgt, wenn wir über das Geld mit Wertstellung am Fälligkeitstage auf dem von uns angegebenen Konto verfügen können.2. Bei Zahlungsverzug sind Verzugszinsen in Höhe von 8 % über dem jeweiligen Basis-zinssatz zu zahlen. Der Nachweis eines höheren oder niedrigeren Verzugsschadens bleibt sowohl uns als auch dem Käufer unbenommen.3. Die Hergabe von Wechseln ist keine Barzahlung und nur mit unserer vorherigen Zustim-mung zahlungshalber zulässig. Diskont- und Wechselspesen gehen zu Lasten des Käufers.4. Zurückbehaltung und Aufrechnung wegen von uns bestrittener Ansprüche des Käufers sind ausgeschlossen.5. Die Nichtbezahlung fälliger Rechnungen oder andere Umstände, welche auf eine we-sentliche Verschlechterung der Vermögensverhältnisse des Käufers nach Vertragsabschluss schließen lassen, berechtigen zur sofortigen Fälligstellung aller unserer Forderungen, die auf demselben Rechtsverhältnis beruhen.

VI. Eigentumsvorbehalt1. Wir behalten uns das Eigentum am Liefergegenstand bis zur vollständigen Bezahlung des Kaufpreises vor. Bis zur Erfüllung aller Forderungen aus der laufenden Geschäftsverbindung mit dem Käufer bleiben die gelieferten Waren unser Eigentum. Der Eigentumsvorbehalt bleibt auch dann bestehen, wenn einzelne unserer Forderungen in laufende Rechnung aufgenommen sind und der Saldo gezogen und anerkannt ist. Kaufpreisforderungen gelten trotz Zahlung solange als nicht erloschen, als eine von uns in diesem Zusammenhang übernommene wechselmäßige Haftung - wie zum Beispiel im Rahmen eines Scheck-Wech-sel-Verfahrens - fortbesteht.

2. Eine Verarbeitung oder Vermischung nimmt der Käufer für uns vor, ohne dass hieraus für uns eine Verbindlichkeit entsteht. Für den Fall der Verarbeitung oder Vermischung mit ande-ren, uns nicht gehörenden Sachen, überträgt der Käufer schon jetzt zur Sicherung unserer Forderungen auf uns das Miteigentum an der neuen Sache im Verhältnis des Wertes der Vorbehaltsware zu den anderen verarbeiteten Sachen mit der Maßgabe, dass der Käufer die neue Sache für uns verwahrt.3. Der Käufer ist berechtigt, über die Erzeugnisse im ordentlichen Geschäftsgang zu verfügen, solange er seinen Verpflichtungen aus der Geschäftsbeziehung mit uns rechtzeitig nachkommt.4. Forderungen aus dem Verkauf von Waren, an denen uns Eigentumsrechte zustehen, tritt der Käufer schon jetzt im Umfang unseres Eigentumsanteils an den verkauften Waren zur Sicherung an uns ab. Verbindet oder vermischt der Käufer die gelieferte Ware entgeltlich mit einer Hauptsache Dritter, so tritt er bereits jetzt seine Vergütungsansprüche gegen den Dritten bis zur Höhe des Rechnungswertes der gelieferten Ware zur Sicherung an uns ab. Wir nehmen diese Abtretungen an.5. Auf unser Verlangen hat uns der Käufer alle erforderlichen Auskünfte über den Bestand der in unserem Eigentum stehenden Waren und über die an uns abgetretenen Forderungen zu geben, sowie seine Abnehmer von der Abtretung in Kenntnis zu setzen.6. Der Käufer ist verpflichtet, die Vorbehaltsware sorgfältig zu verwahren und auf eigene Kos-ten gegen Abhandenkommen und Beschädigung zu versichern. Er tritt seine Ansprüche aus den Versicherungsverträgen hierdurch im Voraus an uns ab. Wir nehmen diese Abtretung an.7. Übersteigt der Wert der Sicherheiten unsere Forderungen um mehr als 20 v.H., so werden wir auf Verlangen des Käufers insoweit Sicherheiten nach unserer Wahl freigeben.8. Das Recht des Käufers zur Verfügung über die unter unserem Eigentumsvorbehalt stehen-den Erzeugnisse sowie zur Einziehung der uns abgetretenen Forderungen erlischt, sobald er die Zahlung einstellt und/oder in Vermögensverfall gerät. Treten diese Voraussetzungen ein, sind wir berechtigt, unter Ausschluss des Zurückbehaltungsrechts ohne Nachfristsetzung oder Ausübung des Rücktritts die sofortige einstweilige Herausgabe der gesamten unter unserem Eigentumsvorbehalt stehenden Waren zu verlangen.9. Soweit der Eigentumsvorbehalt nach dem Recht des Landes, in dem sich die gelieferte Ware befindet, nicht wirksam sein sollte, hat der Käufer auf unser Verlangen eine gleich-wertige Sicherheit zu bestellen. Kommt er diesem Verlangen nicht nach, können wir ohne Rücksicht auf vereinbarte Zahlungsziele sofortige Bezahlung sämtlicher offenen Rechnungen verlangen.

VII. Mängelansprüche1. Der Käufer hat die Ware unverzüglich nach deren Empfang auf Mängel zu untersuchen.2. Offene Mängel sind unverzüglich, spätestens jedoch binnen 14 Tagen nach Empfang schriftlich anzuzeigen. Versteckte Mängel sind spätestens innerhalb von 14 Tagen nach ihrer Entdeckung anzuzeigen. Die Anzeige muss schriftlich erfolgen und hat Art und Ausmaß des Mangels genau zu bezeichnen.3. Bei ordnungsgemäß erhobenen und begründeten Mängelrügen sind wir nach unserer Wahl zu Mängelbeseitigung oder Ersatzlieferung berechtigt. Im Falle der Mängelbeseitigung tragen wir alle zu diesem Zweck erforderlichen Aufwendungen, soweit sich diese nicht da-durch erhöhen, dass die Kaufsache nach einem anderen Ort als dem Erfüllungsort verbracht wurde. Sind wir zur Mängelbeseitigung bzw. Ersatzlieferung nicht bereit oder nicht in der Lage oder verzögert sich diese über angemessene Fristen hinaus aus Gründen, die wir zu vertreten haben oder schlägt ansonsten die Mängelbeseitigung bzw. Ersatzlieferung fehl, so ist der Käufer nach seiner Wahl berechtigt, die Rückgängigmachung des Vertrages oder eine entsprechende Herabsetzung des Kaufpreises zu verlangen.4. Sämtliche Mängelansprüche verjähren in 12 Monaten nach Erhalt der Ware durch den Käufer, sofern die gelieferten Waren nicht entsprechend ihrer üblichen Verwendungsweise für ein Bauwerk verwendet worden sind und dessen Mangelhaftigkeit verursacht haben.5. Im Falle des Unternehmerrückgriffs (§ 478 BGB) sind wir berechtigt, Rückgriffsrechte des Käufers mit Ausnahme der Ansprüche auf Neulieferung der Ware und Aufwendungsersatz abzulehnen, sofern wir dem Käufer für den Ausschluss seiner Rechte einen gleichwertigen Ausgleich einräumen. Ansprüche des Käufers auf Schadensersatz sind ausgeschlossen, ohne dass ein Ausgleich einzuräumen ist.

VIII. Haftung1. Soweit nichts Abweichendes vereinbart wurde, sind alle weitergehenden Ersatzansprüche des Käufers gegen uns und unsere Angestellten, Arbeitnehmer, Mitarbeiter, Vertreter und Erfüllungsgehilfen ausgeschlossen, insbesondere ein Anspruch auf Ersatz von Schäden, die nicht an den gelieferten Waren selbst entstanden sind.2. Die in diesen Lieferungs- und Zahlungsbedingungen enthaltenen Haftungsbegrenzungen und - ausschlüsse gelten nicht, soweit in Fällen des Vorsatzes, der groben Fahrlässigkeit, der Verletzung von Leben, Körper und Gesundheit, oder infolge einer übernommenen Beschaf-fenheits- oder Haltbarkeitsgarantie oder nach den Vorschriften des Produkthaftungsgesetzes eine Haftung unsererseits zwingend vorgeschrieben ist. Das gleiche gilt im Falle einer Pflichtverletzung unsererseits, die die Erreichung des Vertragszwecks gefährdet, wobei die Haftung jedoch auf den Ersatz der typischen, vorhersehbaren Schäden beschränkt ist.

IX. Erfüllungsort, Gerichtsstand und Sonstiges1. Erfüllungsort für alle Verbindlichkeiten aus der Geschäftsverbindung oder aus dem Einzel-vertrag ist unsere jeweilige Versandstelle, für die Zahlung unser Sitz.2. Gerichtsstand ist nach unserer Wahl unser Sitz oder der allgemeine Gerichtsstand des Käufers. Dies gilt auch für Streitigkeiten im Urkunden-, Wechsel- oder Scheckprozess.3. Auf die Vertragsbeziehungen mit unseren Kunden ist ausschließlich das Recht der Bundesrepublik Deutschland anwendbar. Die Anwendbarkeit des Übereinkommens der Vereinten Nationen vom 11. April 1980 über Verträge über den internationalen Warenkauf (CISG - „Wiener Kaufrecht“) ist ausgeschlossen.4. Daten des Käufers werden von uns gespeichert und verarbeitet, soweit dies zur ordnungs-gemäßen Abwicklung der vertraglichen Beziehungen erforderlich ist.

ProMix® ColorScan

NEW: ProMix® Decorative ColorScanArt.Nr. 69731 0000

Characteristics::• Easy to Use: intuitively operated and integrated manual

• Built-in microphone: each measurement can be saved by an audio recording

• Desktop-Software: ideal for further data processing on desktop computer

• Optimised colour selection: recording and identification with a single keystroke

• Data storage: storage of up to 100 measurements

• Comprehensive: colour measuring on most various materials and surfaces

• Integrated range of colours: Mipa colours and several standard colour charts

• Convenient and handy: lightweight hand-held unit with accumulator which is charged via USB

• Unsuitable for metallic and pearl-effect colours!

System Requirements:• Microsoft Windows XP, Microsoft Vista or Microsoft Windows 7 with installed latest

Service Pack• 512 MB RAM Minimum, 1 GB or more recommended • Intel Pentium 4/AMD Athlon XP or a more powerful processor• 400 MB disk free space• USB port• Display resolution: minimum 1024 x 768 Pixel (with True Color)• Network card and internet connection


Product rane - MIPA SE: · PDF fileProduct rane 2015 MIPA SE · Am Oberen ... +49...

Documents

Transcript of Product rane - MIPA SE: · PDF fileProduct rane 2015 MIPA SE · Am Oberen ... +49...