Product Guide 5-09 Equivalencias

Marine Oils

Manufacturer Product Name Product Comments Specifications Container Size

Shell Caprinus XR 40 and 20W40

Zinc free and chlorine free railroad and marine engine oil with an established history of providing outstanding engine cleanliness.

EMD, GE, LMOA Generation 5, Diesel DDC Series 149, API CF, CD

55 gallon, 5 gallon

Shell Nautilus 2-Cycle Engine Oil

Premium quality, high performance, ashless two-cycle oil for water-cooled and air-cooled engines

NMMA TC-W3, TC-WII, TC-W, API TC, JASO FB

55 gallon, 5 gallon, gallons, quarts

Aviation Oils

Heavy Duty Motor Oils

Lubr

ican

ts


ExxonMobil Aviation Oil Elite 20W-50

Semi-synthetic, ashless-dispersant aviation piston engine oil.

Meets Sae J1899 55 gallon, 5 gallon, quarts

ExxonMobil Jet Oil II High performance aircraft-type gas turbine lubricant. Meets MIL-PRF-23699 55 gallon

ExxonMobil Aero HFA Formulated for aircraft systems where use of hydrocarbon-based hydraulic fluids is required

Viscosity Index - 370 55 gallon


Chevron Delo 400 LE SAE 15w-40

Chevron Delo® 400 LE SAE 15W-40 is specifically formulated for new low emission engines with ULSD (2007 engines and beyond). It is fully compatible with previous API oil service categories and engine models.

API Service Categories CJ-4, CI-4 PLUS, CI-4, CH-4, CF, SM, SL. ACEA European Service Categories E-7.

55/1 drum, 5 gal, 12x1 quart case, 6x1 quart case

Chevron Delo 400 SAE 20, 30, 40, 50

Mixed-fleet oils recommended for four-stroke engine applications and for superior performance in older engines using both normal, high, and low sulfur fuels. The Delo 30 can be used in power shift transmissions requiring CAT TO-2 or and Allison C4 fluid.

API Service Categories: CI-4, CH-4, CG-4, CF, CD¹, SG¹, SH¹, SL, SJ, CE¹ (SAE 30).

12x1 quart case

Chevron Delo 100 SAE 30, 40, 50

Delo 100 oils are recommended for use in two and four-stoke diesel engines in farm machinery, construction equipment, marine, and other off-highway applications

Meet API service Categories: CF-2, CD-II¹, CF, CD¹. Comply with Detroit Diesel Corporation two-stroke engine recommendations, including the 0.85% ash maximum limit Series 149 engine.

6x1 quart case

Heavy Duty Motor Oils


ExxonMobil Delvac 1300 15/40 Supreme Heavy Duty Diesel Engine Oil, for the most severe service in off and on highway use.

Exceeds API CJ-4, CI-4 Plus, CH-4

Bulk, 55 gallon, 5 gallon, gallons, 12x1 quart case

ExxonMobil Delvac 1 ESP 5/40 Fully synthetic supreme performance heavy duty diesel oil with long drain interval capability and protection in severe service. Can be used for mixed fleet use.

Meets or exceeds latest API, ACEA, JASO specs for diesel engine oils.

55 gallon, 5 gallon, 12x1 quart case

ExxonMobil Delvac Elite 15/40 Synthetic Blend heavy duty diesel oil. Meets CJ-4 Spec 55 gallon, 5 gallon, 12x1 quart case

ExxonMobil Delvac MX 15/40 Heavy duty diesel engine oil. Meets API SL, CI-4 Plus and ACEA E7

55 gallon, 5 gallon, gallons, 12x1 quart case

ExxonMobil Delac 1630, 1640 & 1650

High performance monograde diesel engine oils, for intercooled turbocharged engines under severe service. Used in a wide variety of applications where a monograde lubricant is recommended.

1630, 1640, 1650 meet API CF, 1630, 1640 meet MTU Type 2, Mercedes Benz 228.2 and ZF TE-ML-04-B

1630 available in 55 gallon, 5 gallon, 12x1 quart case, gallons. 1640, 1650 available 55 gallon, 5 gallon

ExxonMobil Exxon XD-3 20, 30, 40, & 50

Premium diesel engine monograde engine oils, especially suited for two-cycle applications.

30, 40, 50 Meet API CF and AP CF-2. 20, 30, 40, 50 meet API SF.

30 available in 55 gallon, 5 gallon, gallon,12x1 quart cs 40 & 50available in 55 gallon, 5 gallon

ExxonMobil Mobil 1 Turbo Diesel 5W-40

Fully synthetic supreme performance heavy duty diesel oil with long drain interval capability and protection in severe service. Can be used for mixed fleet use.

Meets or exceeds latest API, ACEA, JASO specs for diesel engine oils.

55 gallon, 5 gallon, gallons, 12x1 quart case

ExxonMobil Mobilgard 450 NC Non-zinc, non-chlorine engine oil specially formulated for heavily loaded diesel engines.

SAE 40 55 gallons, 5 gallons

Petro-Canada Duron-E 15W40 Premium heavy duty engine oils that are suitable for use in ‘07EPA compliant low emission engines. Suitable for use in engines powered by Ultra and low sulfur diesel.

Exceed API CJ-4, CI-4 Plus, CH-4

Bulk, 55 gallon, 5 gallon

Petro-Canada Duron XL Synthetic 5W40, 0W30

Fully synthetic, super premium, all season for maximum reliability and wear protection. May be used in extended drain service under good operating practices.

(5W40) Exceeds API CI-4+, (0W30) Exceeds API SM, CH-4


Petro-Canada Duron XL Syntheric Blend 15/40, 10W30

Synthetic Blend heavy duty diesel oil. Exceeds API CI-4+, Detroit 93K214 & 93K215, Mack EO-N, CAT ECF-1

55 gallon, 5 gallon

Petro-Canada Duron Multigrade Heavy duty engine oils that fight soot, year- round use. Meets API SL, CI-4 Plus Bulk, 55 gallon, 5 gallon

Petro-Canada Duron Single Grade 10W, 20W, 30W, 40W, 50W

Universal oils, designed to lubricate engines in heavy-duty service fueled by diesel, gasoline, propane, or compressed natural gas (CNG). Excellent hydraulic fluid for mobile equipment where motor oil is specified.

Suitable for use in most high-speed marine, gas or diesel fueled engines where water separation isn’t required.

55 gallon, 5 gallon

Quaker State Q Diesel Plus Synthetic Blend 5W40

A synthetic blend motor oil designed specifically for Volkswagen vehicles with diesel pump injector engines.

API SJ/CF, ACEA A3/B3-02, VW 500.00, VW 505.00, VW 505.01

55 gallon, 6x1 quart case

Lubr

ican

tsHeavy Duty Motor Oils


Shell RIMULA PREMIUM SAE 15W40

Designed for use for longer oil and engine life in turbo and non-turbo-charged engines

Exceeds API CI-4 Plus, CH-4, CG-4, CF-4, CF


Shell RIMULA® SUPER SAE 15W40 CJ-4

Designed for use for longer oil and engine life in turbo and non-turbo-charged 2007 and new engines

Exceeds API CJ-4, CI-4 Plus, CH-4, CG-4, CF-4, CF


Shell ROTELLA® T MG 15W40

Formulated with Advanced Soot Control for all on-highway and off-highway applications. Exceeds warranty specifications for virtually all diesel and gasoline engine manufacturers.

Exceeds API CI-4 Plus, CH-4, CG-4, CF-4, CF


Shell ROTELLA® T MG 15W40 CJ-4

Formulated with Advanced Soot Control for all on-highway and off-highway applications. Exceeds warranty specifications for virtually all diesel and gasoline engine manufacturers.



Shell ROTELLA® T OIL 10W Single Grade for LPG or LNG engines. Meets performance requirements for Caterpillar TO-2 and Allison's C-4 specification.

Exceeds API CF, SH, MIL-L-2104, F, B, C, D, E, MIL_L-46152E, Allison C-4, C-3


Shell ROTELLA® T OIL 30 Single Grade for LPG or LNG engines. Meets performance requirements for Caterpillar TO-2 and Allison's C-4 specification.

Exceeds API CF-2, CF, SH, Mack EO-K/2, EO-K, Detroit Diesel 53, 71, 92, MIL-L-2104, F, B, C, D, E, MIL_L-46152E, CID A-A-523406A, Allison C-4, C-3, Eaton Trans., Spicer Trans.



Exceeds API CF-4, SJ, CF-2, CF, SH, Detroit Diesel 53, 71, 92, MIL-L-2104, F, B, C, D, E, MIL_L-46152E, CID A-A-523406A, Eaton Trans., Spicer Trans.



Exceeds API CF-2, CF, SH, Detroit Diesel 53, 71, 92, MIL-L-2104, F, B, C, D, E, MIL_L-46152E, Eaton Trans., Spicer Trans.


Shell ROTELLA® T SYNTHETIC 5W40

Fully synthetic formulated for new and older diesel engines, multipurpose, helps speed cold starts, enhanced oxidation stability and soot control, improved fuel economy

Exceeds API CJ-4, CI-4 Plus, CH-4, CG-4, CF-4, CF, SL, SJ, SH

55 gallon, 6/1 gallon, 6/1 qt

Motor Craft Motor Craft Heavy Duty 15W40CJ-4

Motorcraft Super Duty Diesel motor oils are highquality light- and heavy-duty diesel engine oilsdesigned, engineered and recommended by FordMotor Company. The oils meet all warrantyrequirements. It has been designed to meet 2007on-highway exhaust emission standards and foruse with ultralow sulfur diesel fuel.


Bulk

Motor Craft Motor Craft 10w30HD

Motorcraft Super Duty Diesel motor oils are highquality light- and heavy-duty diesel engine oilsdesigned, engineered and recommended by FordMotor Company. The oils meet all warrantyrequirements. It has been designed to meet 2007on-highway exhaust emission standards and foruse with ultralow sulfur diesel fuel.


Bulk

Lubr

ican

ts

Passenger Car Motor Oils


Chevron Supreme Motor Oil (GF-3) 5w-30, 10w-30, 20w-50, 30, 40

Recommended for all four-stoke gasoline engines used in passenger cars, light trucks, power boats, motorcycles, and mobile and stationary equipment.

API Service categories: SL, SJ, SH¹, and all previous API "S" categories, SL (5w-30, 10w-30), ILSAC GF-3 (SAE 5w-30, 10w-30)

12x1 quart case

ExxonMobil Mobil Clean 5000: 10W30, 5W30

For gasoline fueled automobiles and light duty trucks. Meets API SM, SL, SJ or API CF, CD and ILSAC GF-4


ExxonMobil Mobil Clean 5000: 5W20

Meets the latest Ford and Honda requirments. 5W-20 meets Ford WSS-M2C930A and Chrysler MS-6395



For gasoline fueled automobiles and light duty trucks where a higher viscosity oil is preferred or recommended.

API SM, SL, SJ or API CF, CD 55 gallon, 12x1 quart case

ExxonMobil Mobil Clean High Mileage: 5/30, 10/30 and 10/40

Includes seal conditioner to help prevent leaks in higher mileage vehicles. Also a 5000 mile or 6 month drain interval.


ExxonMobil Mobil Clean 7500: 10W30, 5W30




Meets the latest Ford and Honda requirements. 5W-20 meets Ford WSS-M2C930A and Chrysler MS-6395


ExxonMobil Mobil 1 0/20, 0/30, 0/40, 5/20, 5/30, 5/50, 10/30

Fully synthetic advanced performance engine oil. Outperforms all conventional oils.

Same as conventional oils 55 gallon, 12x1 quart case

ExxonMobil Mobil 1 EP series: 5/20, 5/30, 10/30, 15/50

EP-Extended Performance synthetics. Designed to protect between oil change intervals of 15,000 miles or 1 year.

Same as conventional oils 55 gallon, 12x1 quart case

ExxonMobil Mobil 1 V-Twin 20/50 Synthetic 4 cycle motorcycle oil for V-Twin. API SJ, SH, SG/CF, CD and JASO MA

12x1 quart case

ExxonMobil Mobil 1 4T 10/40 Synthetic 4 cycle motorcycle oil. API SJ, SH, SG/CF, CD and JASO MA

12x1 quart case

Lubr

ican

tsManufacturer Product Name Product Comments Specifications Container Size

Quaker State Quaker State Peak Performance 5W20

Meets the latest Ford and Honda requirements. 5W-20 meets Ford WSS-M2C930A and Chrysler MS-6395

Bulk, 55 gallon, 5 gallon, 12x1 quart case

Quaker State Quaker State Peak Performance SAE 30, SAE 40

Single Grade exceeds all auto and light duty truck requirements for gasoline and turbocharged engines. Excellent wear protection where climate and engine temperature do not carry widely.

Meets API SL, Sj, where API SL oils are specified


Quaker State Quaker State Higher Mileage 10W30, 5W30

The only motor oil specially formulated with Slick 50 and extra friction modifiers to meet the needs of older, higher mileage engines with over 75K miles.

API SM, SL, SJ, SG or API CF, CD


Quaker State Q HI RPM Synthetic Blend 5W30, 10W30, 5W20

Less friction, better protection at high RPMs, and best of all maximum power with an oil that stays in grade

Exceeds API SL, ILSAC GF-2, GF-3, GF-4, SJ, SH, SG, SF


Quaker State Q 4X4 and SUV Synthetic Blend 10W30, 10W40, 15W40, 5W30, 5W20

Specially formulated to deliver maximum performance and power for hard working engines. Its heat activated molecules kick in under heavy loads and thermal stress, creating a low-friction, heat-resistant lubrication film.

API SM, SL, SJ, CF, ILSAC GF-4, GM4718, GM 6094, MS 6395, TU-5, DAIMLER CHRYSLER MS 10725


Quaker State Q Horsepower Full Synthetic 0W20, 10W30, 10W60, 5W30, 5W20, 5W40, 5W50

Guaranteed to maximize horsepower more than any other competitive synthetic oil.



Quaker State Q Torque Power Full Synthetic 10W30, 10W40, 5W30, 5W20

Guaranteed to maximize torque more than any other competitive synthetic oil.

API SM, SL,SJ,CF,ILSAC GF-4, GM4718, GM 6094, MS 6395, TU-5, DAIMLER CHRYSLER MS 10725

6x1 quart case

Quaker State Q Advanced Full Synthetic European Formula 5W30, 5W40

Formulated to meet the needs of European vehicles that go beyond the minimum standards.

MB 229.3, MB 229.1, VW 502.00, VW 505.00, BMW LL-98, ALL PORSCHE REQUIREMENTS, ACEA A3/B4-02, B3-98, API SL/CF

55 gallon drum

Shell Formula Shell 10W30, 10W40, 5W30, 20W50


Bulk, 55 gallon, 5 gallon, 12x1 quarts

Shell Formula Shell 5W20 Meets the latest Ford and Honda requirements. 5W-20 meets Ford WSS-M2C930A and Chrysler MS-6395

Bulk, 55 gallon, 5 gallon, 12x1 quarts

Shell Formula Shell SAE 30, SAE 40

Single Grade exceeds all auto and light duty truck requirements for gasoline and turbocharged engines. Excellent wear protection where climate and engine temperature do not carry widely.

Meets API SL, Sj, where API SL oils are specified


Shell Formula Shell High Mileage 10W30, 10W40

Includes seal conditioner to help prevent leaks in higher mileage vehicles.


Shell Formula Shell Synthetic Blend 5W30, 10W30

Premium motor oil to ensure excellent cold flow starts and extreme heat protection



Shell Formula Shell Full Synthetic 10W30, 5W30

Fully synthetic advanced performance engine oil for improved fuel economy and excellent cold and hot temperature protection




Lubr

ican

ts



Motorcraft Motorcraft 5W30, 10W30

Motorcraft motor oils are manufactured with high-viscosity index, premium-quality base oils and specially designed performance additives, which help minimize engine deposits and wear, protect against high-temperature oxidation, low-temperature gelling, rust, corrosion and foaming.

Meets API Service Category CJ-4

Bulk

Motorcraft Motorcraft 5W20 Synthetic Blend

Motorcraft Premium Synthetic Blend motor oils are manufactured with high-viscosity index, premium-quality, synthetic / hydroprocessed base oils and specially designed performance additives, which help minimize engine deposits and wear, protect against high-temperature oxidation, low-temperature gelling, rust, corrosion and foaming.

API Certified for gasoline engine service ILSAC GF-4 and meet the API SM/Energy Conserving Service Category

Bulk

Motorcraft Motorcraft ATF Motorcraft® MERCON® V is a premium-quality fluid designed, engineered and recommended by Ford Motor Company specifically for use in Ford, Lincoln and Mercury vehicles that require MERCON® V type fluid.

It is an approved DEXRON® III fluid. It is also recommended for use in pre-1989 automatic transmissions, which call for a DEXRON® IIE, DEXRON® II, DEXRON‚® and Type “A” Suffix “A” fluids. Motorcraft® MERCON® V is an approved Allison C-4 Fluid. It should not be used in transmissions requiring Type F fluid

Bulk

Lubr

ican

ts

Transmission and Torque Fluids


Chevron Dexron-III Mercon ATF that is designed for use in GM transmissions that specify Dexron-III, Dexron-II, or Dexron IIE fluid and Ford Motor Company transmissions that require MERCON fluid (1996 and newer Ford transmissions may require a MERCON V ATF).

Meets of exceeds manufacturers performance requirements: 1) GM DEXRON -III (approved for H specification), 2) Ford MERCON, 3) Allison C4 Fluid, 4) Denison P-46 Piston Pump, 5) Vickers pump.

12x1 quart case

ExxonMobil Mobil ATF D/M Multipurpose Automatic Transmission Fluid. 2005 and earlier GM vehicles, 1988 and newer Fords, Dexron-III

55 gallon, 5 gallon, 12x1 quart case

ExxonMobil Mobil 1 Synthetic ATF Synthetic blend lubricant protects against extreme hot and cold temps, also meets Mercon V spec.

Mercon, Mercon V, Allison C-4, Caterpillar TO-2

55 gallon,12x1 quart case

ExxonMobil Mobil Multivehicle ATF Multipurpose ATF that also meets Mercon V spec and Chrysler ATF specs.

55 gallon, 5 gallon

ExxonMobil Mobiltrans HD: 10W, 30, 50

Heavy duty transmission and drive train lubes for powershift transmission, gear box and final drives.

Caterpillar TO-2, 10W and 30 meet Allison C-4 Spec

55 gallon, 16 gallon, 5 gallon

ExxonMobil Mobil Delvac Synthetic Transmission Fluid 50

Fully synthetic heavy duty manual transmission fluid. Eaton Roadranger, Mack TO-A Plus, Meets the API MT-1 EP gear oil service classification

375 lb, 105 lb kegs, 5 lb

ExxonMobil Mobilfluid 424 Multipurpose tractor fluid engineered that meets transmission and hydraulic fluid requirements.

Meets API GL-4, FNHA-2-C-201.00, JDM J20C, Kubota UDT, Vickers 35VQ25, Volvo WB 101/BM, CNHMAT 3525, Allison C-4, Caterpillar TO-2, Ford ESN-M2C134-D, MF 1135, MF 1141


Petro-Canada Petro-Canada ATF D3M

Outstanding oxidative and thermal stability, extremely long service life under severe operating conditions

Meets GM 6297M, Ford M2C185A. Meets DEXRON III(G& H), II(E), or MERCON

55 gallon, 5 gallon

Petro-Canada Petro-Canada Synthetic Blend ATF

Exhibits all qualities listed in ATF D3M Meets Ford, MERCON® and Allison C-4

55 gallon, 5 gallon

Petro-Canada Petro-Canada ATF TYPE F

Meets requirements for pre-1980 Ford automatic transmissions

Meets Ford ESW-M2C33-F 5 gallon

Petro-Canada Petro-Canada Dexron VI ATF

Exceptional automotive transmission fluid approved by General Motors. Formulated to provide twice the service life of a Dexron III.

Dexron III(H), III(G), II(E); meets GMN10060

55 gallon, 5 gallon

Petro-Canada Petro-Canada ATF+4 Specifically formulated to meet needs of Chrysler automatic transmissions.

Meets Chrysler MS-9602 55 gallon, 5 gallon

Petro-Canada Petro-Canada HD Synthetic Blend ATF

Suitable for use in heavy duty fleets for up to 50,000 miles in severe operations and100,000 in normal service

Allison C-4, Catipillar TO-2, ZF TE-ML, Voith G607 & G1363 and Ford Mercon V. Suitable on Allison TES-295

55 gallon, 5 gallon

Lubr

ican

ts

Natural Gas Engine Oils


ExxonMobil Mobil Pegasus Series Oils, Pegasus 701 series, Pegasus 610, Pegasus 605, Pegasus 505 series

Natural gas engine oils, 2 cycle 40 & 30 wts, 4 cycle 40 wt., 4 cycle-also bio-fuel, 40 & 30 wt

55 gallon

Transmission and Torque Fluids


Quaker State Quaker State Mercon-Dexron III ATF

Multipurpose Automatic Transmission Fluid. 2005 and earlier GM vehicles, 1988 and newer Fords, Dexron-III, except for Type F and Mercon V

Bulk, 55 gallon,16 gallon, 5 gallon, 12x1 quart case

Quaker State Quaker State ATF +3 55 gallon, 16 gallon, 12x1 quart case

Quaker State Quaker State ATF+4 Multipurpose Automatic Transmission Fluid. For use in all 1976 and prior Ford and 1977-1980 Ford models that specify Type F

6x1 quart case

Quaker State Quaker State ATF Mercon V

Multipurpose Automatic Transmission Fluid. Ford Mercon V and GM Dexron III


Quaker State Quaker State Dexron VI


Quaker State Quaker State Multi-Vehicle ATF

Multipurpose ATF that meets Ford, Chrysler, and GM specs except Dexron VI

Type A, DEXRON, DEXRON II, DEXRON IIE, DEXRON III(H), MERCON, MERCON V

Bulk 55 gallon, 16 gallon, 5 gallon, 12x1 quart case

Quaker State Quaker State Higher Mileage ATF

A specially blended ATF for higher mileage transmissions (over 75,000 miles)

GM/Ford except GM DEX III, FORD TYPE F, MERCON V, MERCON SP

12x1 quart case

Quaker State Quaker State Type F ATF

12x1 quart case

Quaker State Quaker State Special Import ATF

Manufactured with highly refined base oils and performance additives to satisfy auto manufacturers' ATF specifications where DEXRON II fluids are recommended

DEXRON II 55 gallon,12x1 quart case

Quaker State Quaker State Synchromesh Fluid

A synchromesh transmission fluid designed for certain manual transaxles and manual transmissions used by GM or Chrysler.

GM spec 9985648, Chrysler MS-9224

12x1 quart case

Quaker State Quaker State 4X4 Synthetic Blend ATF

A special blend of high quality base stocks and additives to offer outstanding resistance to oxidation, sludge and varnish deposits. Offers excellent flow characteristics to -40 degrees F.

DEXRON III(H), DEXRON - III(G), DEXRON - IIE, DEXRON - II, MERCON, MERCON V

55 gallon, 12 quart case

Lubr

ican

tsTransmission and Torque Fluids


Shell Formula Shell ATF Mercon/Dexron III - Donax TG

Multipurpose Automatic Transmission Fluid. 2005 and earlier GM vehicles, 1988 and newer Fords, Dexron-III, except for Type f and Mercon V

Bulk, 55 gallon, 5 gallon, 12x1 quart case

Shell Formula Shell Type F Multipurpose Automatic Transmission Fluid. For use in all 1976 and prior Ford and 1977-1980 Ford models that specify Type F


Shell Formula Shell Mercon V Multipurpose Automatic Transmission Fluid. Ford Mercon V & GM Dexron III 55 gallon, 5 gallon

Shell Formula Shell Multi-Vehicle ATF

Multipurpose ATF that meets Ford, Chrysler, and GM specs except Dexron VI

Caterpillar TO-2, 10W and 30 meet Allison C-4 Spec


Shell Shell Donax TC 10W, 50W

Designed for modern transmission, final drive, oil immersed brake and hydraulic systems fitted to heavy-duty off-road equipment--not recommended for farm tractor service that employs a common reservoir for transmission and hydraulic systems

Allison C-4, C-3, Cat TO-4, TO-2, Eaton Fuller, Euclid, Ford Type F, Komatsu-Dresser, Terex, Vickers M-2950-S, ZF Powershift

55 gallon, 5 gallon

Shell Shell Donax TD Designed for use in transmissions, hydraulic systems, oil immersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment

Virtually all makes of construction and farm tractors--except Caterpillar TO-4 and Allison C-4


Shell Shell Donax TX The ultimate performance automatic transmission fluid which enables extended service intervals and extended limited warranty in transmissions requiring Allison TES-295 type products, ZF and Voith.

Allison TES-389 (AA-32332007), Dexron III, Former Ford Mercon, Ford Mercon V, Voith, ZF TE-ML 14B, 16L, 17C

55 gallon, 5 gallon

Motorcraft Mercon V A premium quality transmission fluid designed, engineered and recommended by Ford for use in vehicles that require Mercon V or Mercon type fluid

All vehicles that call for Mercon V or Mercon type fluid

Bulk

Gear Oils


ExxonMobil Mobilube HD 80/140 High performance gear lube for commercial transmissions, drive trains, and axles.

Meets API Gl-5 400 lb, 120 lb, 38 lb

ExxonMobil Mobilube HD Plus 80/90 and 85/140

Extra high performance gear lube for commercial transmissions, drive trains, and axles.

Meets API Gl-5, MT-1, not recommended for API Gl-4 level performance

400 lb, 120 lb, 38 lb

ExxonMobil Delvac Synthetic Gear Oil 75/90 and 80/140

Synthetic drive train gear lube formulated for severe service and extreme temperature.

Meets API Gl-5, MT-1, not recommended for API Gl-4 level perfromance

400 lb, 120 lb, 38 lb

ExxonMobil Mobilgear 600 XP 68, 100, 150, 220, 320, 460 & 680

Industrial spur, helical and bevel enclosed gears with circulation or splash lubrication at oil temperatures up to 100 degrees Celsius

Choice for many OEMs 400 lb, 38 lb

ExxonMobil Mobilgear SHC series (150, 220, 320, 460, 680, 1000, 1500, 3200, 6800)

Synthetic heavy duty gear oils desgined for enclosed gearing as well as plain and rolling element bearings.

Choice for many OEMs 55 gallons, 5 gallon

Lubr

ican

ts

Gear Oils


Petro-Canada Traxon 80W90 Outstanding long-lasting protection. SAE J2360 (formerly MIL-PRF-2105E), Mack GO-J, ZF TE-ML 05A, 16B, 17B, 19B

Bulk, 55 gallon, 120 lb, 35 lb

Petro-Canada Traxon XL Synthetic Blend 75W90

Superior long-lasting protection plus low temperature protection.

SAE J2360 (formerly MIL-PRF-2105E), Mack GO-J, ZF TE-ML 05A, 16B, 17B, 19B


Petro-Canada Traxon 85W140 Outstanding shear stability and anti-wear EP protection SAE J2360 (formerly MIL-PRF-2105E), Mack GO-J, ZF TE-ML 05A, 16B, 17B, 19B


Petro-Canada Traxon XL Synthetic blend 80W140

Excellent shear stability which ensures retention of viscosity

SAE J2360 (formerly MIL-PRF-2105E), Mack GO-J, ZF TE-ML 05A, 16B, 17B, 19B


Petro-Canada Traxon E Synthetic 75W90 & 80W140

Contains extreme pressure additives, protects gears and bearings against rust, corrosion and oxidation.

55 gallon, 5 gallon

Petro-Canada Duratran Tractor Transmission-hydraulic fluid (available in full synthetic & XL synthetic blend)

Designed for use in farm tractors with common oil system for transmission, differential, hydraulic, power take-off, wet brake and power steering mechanisms.

55 gallon, 5 gallon

Quaker State Quaker State Full Synthetic 75W140 GL-5

Thermally stable gear oil engineered to exceed the most severe performance requirements for passenger cars, SUV's, and light duty trucks.

GL-5 12x1 quart case, 35 lb

Quaker State Quaker State Full Synthetic 75W90 GL-4

Thermally stable gear oil engineered to exceed the most severe performance requirements for passenger cars, SUV's, and light duty trucks.

GL-4 12x1 quart case

Quaker State Quaker State High Perf 80W90 GL-5

Recommended for conventional and limited slip differentials, both for top-off and complete refill.

GL-5 12x1 quart case, 35 lb, 120 lb, 400 lb

Quaker State Quaker State High Perf 85W140 GL-5

Recommended for conventional and limited slip differentials, both for top-off and complete refill.

GL-5 12/1 qts, 35 lb, 120 lb, 400 lb

Quaker State Quaker State Multi-Purpose 2105 75W90 GL-4

Formulated to be compatible with bronze or copper containing alloys found in synchronizers.

GL-4 35 lb, 120 lb

Quaker State Quaker State Multi-Purpose 2105 80W90 GL-4

Formulated to be compatible with bronze or copper containing alloys found in synchronizers.

GL-4 120 lb

Quaker State Quaker State Super Quadrolube 75W EP GL-5

Multi-purpose, extreme pressure products formulated for passenger car and light truck conventional differentials, as automotive manual transmissions and transaxles.

GL-5 120 lb

Quaker State Quaker State FCI GL5 80W90

Premium heavy-duty, extreme pressure gear lubricants formulated with high viscosity index, thermally stable lube oil base stocks and a highly effective sulfur-phosphorous extreme pressure anti-scuff, anti-wear, anti-weld additive system.

Gl-5, API MT-1, Mack Go-J 120 lb, 400 lb

Quaker State Quaker State FCI Synthetic 75W90

Offers excellent resistance to deposit formation and are approved for extended oil drain intervals of up to 500,000 miles in over-the-road trucks.

Dana SHAES-234, SHAES 256, ArvinMeritor 076-N, API GL-5, MT-1, MIL-PRF-2105E

120 lb

Quaker State Quaker State High Perf SAE 80W90

Premium heavy-duty, extreme pressure gear lubricants formulated with high viscosity index, thermally stable lube oil base stocks and a highly effective sulfur-phosphorous extreme pressure anti-scuff, anti-wear, anti-weld additive system.

Gl-5, API MT-1, Mack Go-J 35 lb

Lubr

ican

tsGear Oils


Shell Shell Cyprina 963 For use in lubricating traction motor suspension bearings on locomotives and plain bearings in railcar journal boxes.

AAR M-963, GE D50E14, EMD 1002

38 lb, 120 lb, 400 lb

Shell Spirax EW 80W140, 75W90

High performance multi-grade extreme pressure lubricants approved for extended warranty

Dana SHAES 256, ArvinMeritor O76-Q, Mack GO-J, API GL-5, MT-1, MIL-PRF-2105E

38 lb, 120 lb, 400 lb

Shell Spirax GSX SAE 50 38 lb, 120 lb, 400 lb

Shell Spirax HDGO 80W90, 80W140

High performance multi-grade extreme pressure lubricants approved for heavy-duty truck and automotive differentials, manual transmissions and oil lubricated wheel bearings, drive-train gears of heavy-duty automotive, trucking and off-road equipment

API GL-5, MT-1, Mack GO-J, GO-H, Go-G, MIL-PRF-2105E, SAE J2360, O-76-A, O-76-D, CEMS B-22

38 lb, 120 lb, 400 lb

Shell Spirax LS 80W90 High performance multigrade extreme pressure, multipurpose gear lubricant formulated for use in passenger cars and light duty trucks with limited-slip differentials.

API GL-5 38 lb, 120 lb, 400 lb

Shell Spirax S 75W90, 80W140

Fully synthetic, multipurpose, heavy duty gear lubricants designed for high performance automotive applications

API GL-5, MT-1, DANA SHAES 256, EATON PS-163, PS-037, PS-109, GE D50E9C, HARNISCHFEGER 474, MACK GO-J PLUS, GO-J, MIL-PRF-2105E

38 lb, 120 lb, 400 lb

Shell Spirax ASX-R 75W90, 80W140

A fuel-efficient, long life transmission and axle fluid designed to provide ultimate protection to the latest heavy duty manual transmissions and axles that call for an API GL-5 product. Specially formulated with synthetic base oils and additive technology that provide improved lubrication of the drive train, lower the operating temperature and help promote longer life for the equipment. Standard industry and commercial fleet testing have demonstrated a fuel efficiency improvement of over 1%.

API GL-5, MT-1, DANA SHAES 256 REV C, O76-N, O76-E, TMS 6816, MACK GO-J PLUS, MIL-PRF-2105E/SAE J2360

38 lb, 120 lb, 400 lb

Lubr

ican

ts

Greases


Chevron Delo Grease EP NLGI 00, 0, 1, 2

Formulated to perform in demanding conditions of high and low temperatures. Lithium complex thickener. Services a wide variety of applications: Class 8 truck chassis and bearings, centralized grease systems, plus high-temp. truck and automotive wheel bearings.

NLGI 1 and 2 are approved for the NLGI Certif. Mark GC-LB. Meets the Mack MG-C grease specifications.

120 lb, 35 lb, 12x1 quart case

Chevron Ultra-Duty Grease EP NLGI 0, 1, 2

Recommended for use in auto and industrial equipment operating under severe service except where very high temperatures are encountered. Applications: construction material handling equipment, drilling equipment, logging equipment, rock quarry equipment, etc. Good shock load and rust protection properties.

Recommended for use in all types of plain and antifriction bearings from 1-1/2 inch OD to over 16 inch OD, operating speeds from 50 to 3,000 rpm, as well as slides, and gears.

35 lb, 10 tube x case

ExxonMobil Mobilgrease XHP 222 Lithium complex, for automotive, industrial, construction & marine. Wheel bearing rated.

NLGI 2 396.8 lb, 121.2 lb, 35.2 lb, 10 tube x case

ExxonMobil Mobilgrease XHP 222 Special

Lithium complex grease, multipurpose with the addition of Moly. Wheel bearing rated.

NLGI 2 396.8 lb, 121.2 lb, 35.2 lb, 10 tube x case

ExxonMobil Mobilgrease 28 Supreme performance, wide temperature, antiwear grease. Combines PAO synthetic base fluid with organo-clay thickener. Has a high dropping point value of around 300 degrees Celsius.

Between NLGI 1 & NLGI 2. Supersedes MIL-G-81322, MIL-G-7711A, MIL-G-3545B, MIL-G-25760A.

396.8 lb, 121.2 lb, 35.2 lb, 10 tube x case

ExxonMobil Delvac Xtreme Grease High performance EP lithium complex for commercial vehicle severe service. Rated for heavy load wheel bearing.

NLGI 2 400 lb, 120 lb, 35 lb, 10 tube x case

ExxonMobil Mobil 1 Synthetic Grease

High performance automotive grease which combines synthetic base fluid with a lithium complex soap thickener.

NLGI 2 10 tube x case

ExxonMobil Mobil Polyrex EM Specially formulated for electric motor bearings Compatible with lithium complex greases, and electric motor mineral polyurea products as determined by ASTM D 6185.

10 tube x case

Lubr

ican

tsGear OilsManufacturer Product Name Product Comments Specifications Container Size

Shell Dentax Gear oils Designed for use in automotive and heavy duty equipment transmission and differentials where an EP lubricant is not required and an API GL-1 is specifically called for by OEM.

GL-1 38 lb, 120 lb, 400 lb

Shell Dentax S SAE 50 Fully synthetic for use in heavy duty truck manual transmissions. E500 Roadranger approved for 500,000 mile drain interval.

Eaton and Meritor, API MT-1, Eaton Trans., PS-164, PS-081, Mack TO-A Plus, International TMS 6816

38 lb, 120 lb, 400 lb

Shell Omala 68, 100, 150, 220, 320, 460, 680, 1000, 1500, 3200

Specially formulated for Industrial Gears requiring an extreme pressure type of oil.

ANSI/AGMA 9005-E02, US STEEL 224 CINCINNATI LAMB, DIN 51517, DAVID BROWN SL 53.101

39 lb, 120 lb, 400 lb

Shell Omala RL 68, 150, 220, 320, 460, 680

Synthetic hydrocarbon base fluids in combination with selected synthetic ester base fluids to produce performance lubricants for severe operating conditions.

ANSI/AGMA 9005-E02 38 lb, 120 lb, 400 lb

Shell Tivela S 220, 320, 460, 680

Advanced synthetic heavy duty industrial gear lubricant formulated using specially selected polyalkylene glycol base fluids and additives. Suitable for enclosed industrial reduction gear systems, worm gears, "lubricated for life" systems, bearing and circulating systems, plain and roller element bearings.

Brown Type G, Flender AG 38 lb, 120 lb, 400 lb

Greases


ExxonMobil Mobilith SHC series Synthetic industrial greases, electric motor heavy duty automotive & industrial tough industrial and marine applications slow speed heavy load heavy duty truck trailer wheel hubs.

Available in multiple NLGI Grades ranging from 00 to 2.

103.6 lb, 35.2 lb, 10 tube x case

ExxonMobil Mobiltemp 2 High performance clay-thickened product designed for plain and antifriction bearings operating at low speed and high temperatures.

NLGI 2 103.6 lb, 35.2 lb, 10 tube x case

ExxonMobil Mobiltemp 78 High performance clay-thickened product designed for plain and antifriction bearings operating at low speed and high temperatures.

NLGI 1 103.6 lb, 35.2 lb, 10 tube x case

ExxonMobil Mobilux EP series, EP: 0, 1, 2 & 3

Lithium hydroxystearate grease for lubrication under moist conditions. For enclosed gears and bearings in poorly sealed gear boxes.

NLGI 0, 1, 2, 3 35.2 lbs, Some available in tubes and 396.8 lb. - Check for availability

ExxonMobil Mobilux EP 23 Lithium hydroxystearate grease for lubrication under moist conditions. For enclosed gears and bearings in poorly sealed gear boxes.

NLGI 00 35.2 lbs, Some available in tubes and 396.8 lb.

Petro-Canada Precision High quality, cost effective lithium based extreme pressure greases

EP1, EP2, MOLY 55 gallon, 16 gallon, 5 gallon, 10 tube x case

Petro-Canada Precision XL High quality, long-life, lithium-complex/lithium grease designed for automotive and industrial equipment

EMB, EP 00, EP 000, EP1, EP2, Moly EP1& EP2, Moly Artic, Moly EP0, Heavy Duty, Rail Curve

55 gallon, 16 gallon, 5 gallon, 10 tube x case

Petro-Canada Precision Synthetic Long-life, premium performance, all-season, extreme pressure lithium complex containing synthetic base-oils.

NLGI Automotive Service Classification GC-LB


Petro-Canada Precision Synthetic Moly

This is an NLGI #1 lithium complex that contains 3% Molybdenum Disulphide


Petro-Canada Precision Synthetic Heavy

Synthetic, high temperature EP Lithium complex grease NLGI Consistency between #1 & 2


Petro-Canada Precision Synthetic Heavy EP 00

Semi-fluid lithium complex designed for lubricating truck/trailer wheel-end bearings


Quaker State Quaker State Full Synthetic Multi-Purpose EP

Full synthetic grease with a lithium complex soap thickener. It is a smooth purple grease with a high ASTM dropping point.

NLGI 2, GC-LB 120 lb, 10 tube x case

Quaker State Quaker State Multi-Purpose Wheel Bearing Grease

High temperature lithium complex grease which contains high quality petroleum base oils. The primary applications for it is in high temperature operations such as wheel bearings on vehicles equipped with conventional, disc and antilock braking systems.

NLGI GC-LB 120 lb, 10 tube x case

Quaker State Quaker State FCI Moly Graphite EP Grease 2 1/2

A premium quality, multi-functional, extreme pressure, lithium complex, high temperature grease that combines state-of-the art lithium complex soap thickener technology with molybdenum-disulfide and graphite.

Multi-purpose 400 lb, 120 lb, 10 tube x case

Quaker State Quaker State Multi-Purpose Lithium EP 2

An extreme pressure, water resistant lithium based general purpose grease.

NLGI 2, ASTM D 4950 LB-LA/GA-GB

400 lb, 120 lb, 35 lb,10 tube x case

Lubr

ican

ts

Greases


Shell Alvania DTR GREASE Designed specifically for the grease to be used in railroad axle journal roller bearings which are designed not to be lubricated in the field.

Association of American Railroads 942-98

120 lb, 35 lb

Shell Alvania WFX GREASE 0, 1, 2

Lithium soap greases fortified with a specifically formulated multipurpose additive package for use as railroad track lubricants. May also find applications in construction, mining and agricultural equipment.

KLF Lubriquip, Bijur, Portec and Moore, Steele

396.8 lb, 120 lb, 35 lb, 10 tube x case

Shell Alvania EP GREASE Brown in color and are manufactured with a lithium 12-hydroxystearate soap thickener providing increased load carrying properties and corrosion resistance. For on and off-highway vehicles, construction equipment, industrial when temperatures do not exceed 275 degrees farenheit.

EP 0 - P-79 EP 2 - P-64

396.8 lb, 120 lb, 35 lb, 10 tube x case

Shell Alvania GL GREASE 00

Lithium soap grease containing an ISO 680 base oil and tackifier for use primarily in gear drives, which specify grease lubrication

Gang mowers, gearboxes, which drive stirrers in mixing and reactor vessels

400 lb, 120 lb, 35 lb, 10 tube x case

Shell Albida GREASE LC Lithium complex, extreme pressure greases. They have high dropping points, excellent mechanical stability and high film strength. Designed for the lubrication of industrial equipment where heavy loads and wet conditions are present.

NLGI Classification GC-LB 400 lb, 120 lb, 35 lb, 10 tube x case

Shell Retinax LC GREASE Premium lithium complex greases made with an ISO 220 viscosity base oil and selected additives. They have a distinctive red color. Provide excellent EP/load carrying ability, oxidation stability, rust protection and ability to adhere to metal surfaces and resist water wash-off.

ASTM D4950 Classification GC-LB

400 lb, 120 lb, 35 lb, 10 tube x case.

Shell Retinax CMX and MDX GREASE 1, 2

Multipurpose lithium complex high dropping point, extreme pressure greases containing molybdenum disulfide (moly). Primarily intended for construction, mining and agricultural equipment applications.

Caterpillar's Multipurpose Molybdeum Grease Specification


Shell Retinax TL 00 Premium grease formulated with a selected synthetic base fluid and a lithium complex thickener system to produce a semi-fluid grease. For use in truck wheel hubs, lubrication of leaky gear boxes, and gearboxes that are difficult to service.

RP 631 A 400 lb, 120 lb, 35 lb, 10 tube x case

Shell Rotella HD GREASE 2 400 lb, 120 lb, 35 lb, 10 tube x case

Shell SUPER DUTY GREASE 2

Lithium 12-hydroxystearate thickened grease containing 1% molybdenum disulfide and a special polymer. Developed in conjunction with Mack and Ford. Specially formulated for heavy-duty, severe service in trucks and other automotive applications where extended lubrication intervals are desired.

NLGI Grade 2, Mack MG-C long life, Ford ESA-M1C75B long life


Shell Darina AX 2 GREASE Multipurpose automotive grease thickened with Microgel. Microgel provides a grease that does not melt. For use in passenger cars, trucks, tractors, buses, and construction equipment.

NLGI 2 400 lb, 120 lb, 35 lb, 10 tube x case

Shell Darina EP GREASE Multipurpose non-soap grease that gives excellent lubrication for extended time periods in wet or dry applications and over a wide range of temperatures. Formulated to give extreme pressure characteristics.

NGLI 0, 1, 2 400 lb, 120 lb, 35 lb, 10 tube x case

Shell Dolium BRB GREASE Highly refined mineral oil base stock, a polyurea thickener, and special additives that provide outstanding performance in high-speed bearings operating at high temperatures.

NLGI 2

Lubr

ican

tsHydraulic Oils


ExxonMobil DTE 20 Series 24, 25, 26

Supreme performance anti-wear hydraulic oils for a wide range of equipment.

ISO Grades: 24 = 32, 25 = 46, 26 = 68.

55 gallon, 5 gallon

ExxonMobil DTE 10 M series: 11M, 12M, 13M, 15M, 16M, 18M, 19M

Anti-wear hydraulic oils engineered for a wide range of temperatures. Optimum flow at sub zero temperatures.

ISO Grades: 11M = 15, 12M = 22, 13M = 32, 15M = 46, 16M = 68, 18M = 100, 19M = 150.

55 gallon, 5 gallon

ExxonMobil Mobil EAL 224H EAL (environmentally aware) biodegradable hydraulic oil, for hydraulic systems where spill or leakage could damage the environment.

Compatible with gear systems requiring ISO VG 32 or 46.

55 gallon, 5 gallon

Petro-Canada Environ AW; 32, 46, 68 Monograde hydraulic fluids designed for use in mobile and stationary equipment

DIN 51524 Part 2 HLP or ISO 6743/4 Type HM fluid

55 gallon, 5 gallon

Petro-Canada Environ MV; 32, 46 Wide temperature multigrade hydraulic fluid 13cST after shear in ASTM D5621 Sonic shear test and 750 cP

55 gallon, 5 gallon

Petro-Canada Hydrex AW; 22, 32, 46, 68, 80, 100

Premium, long lasting, anti-wear, recommended in heavy-duty applications requiring superior wear protection

Meet ISO 6743/4 Type HM and the USS 127 specifications.

55 gallon, 5 gallon

Petro-Canada Hydrex MV; Atric 15, MV 22, MV 32, MV 60

Premium, long life fluids used in wide temperatures. Meet ISO 6743/4 Type HM and the USS 127 specifications.

55 gallon, 5 gallon

Petro-Canada Hydrex XV All Season Hydraulic Fluid Meet ISO 6743/4 Type HM and the USS 127 specifications.

55 gallon, 5 gallon

Petro-Canada Hydrex Extreme-Wide Temperature

Suited for extremely wide range of high and severe low temperatures.

13cST after shear in ASTM D5621 Sonic shear test and 750 cP

55 gallon, 5 gallon

Petro-Canada Hydrex DT; 22, 46 Detergent/dispersant hydraulic fluid, intended for use in systems that are prone to contamination

55 gallon, 5 gallon

Shell Tellus 22, 32, 46, 68, 100, 150

Premium performance mineral based hydraulic fluids formulated with patented Shell additive technology in combination with high quality base oils.

Denison HF-0, HF-1, HF-2, Eaton/Vickers M-2950-S and I-286-S, Cincinnati Lamb p-68, P-70, and P-69, Komatsu Engineering Standard

55 gallon, 5 gallon

Shell Tellus S 32, 46, 68 Premium non-zinc, anti-wear hydraulic oils providing exceptional performance in hydraulic systems which operate under severe conditions.

Denison HF-0, Vickers M-2950-S and I-286-S, DIN 51524

55 gallon, 5 gallon

Shell Tellus T 15, 22, 32, 46, 68, 100

Blended with a carefully selected viscosity index improver in severely hydro processed Group II base oils to give a high viscosity index without excessive loss of viscosity from mechanical shearing.

Denison HF-0, Vickers M-2950-S and I-286-S, Cincinnati Lamb

55 gallon, 5 gallon

Shell Tellus Premium 32, 46, 68

High performance hydraulic oils blended with Shell additive technology in combination with hydro treated base oils to meet the requirements of the most demanding hydraulic systems.

Denison HF-0, Vickers M-2950-S and I-286-S, Cincinnati Lamb

55 gallon, 5 gallon

Shell Shell AW 32, 46, 68 Formulated for systems which require effective anti-wear hydraulic oil. For use in nearly all machine lubrication and hydraulic fluid applications.


Lubr

ican

ts

Compressor Oils


ExxonMobil Mobil Rarus 427 Non-synthetic. Recommended for single and multi-stage air compressors, reciprocating & rotary vane.

ISO Grade: 100, Not intended for us in air compressors for breathing applications.

55 gallon, 5 gallon

ExxonMobil Rarus 800 series: 824, 826, 827, 829

Synthetic compressor lubricant. Primarily for severe duty reciprocating air compressors.

ISO Grades: 824 = 32, 826 = 68, 827= 100, 829 = 150.

55 gallon, 5 gallon

ExxonMobil Rarus SHC 1000 series: 1024, 1025, 1026

Synthetic compressor lubricant. Primarily for severe duty rotary screw and vane air compressors.

ISO Grades: 1024 = 32, 1025 = 46, 1026 = 68.

55 gallon, 5 gallon

Shell Corena K 100, 150, 460

Specially formulated for wet gas or hydrocarbon gas compressors. Contain polar or fatty oils which enable the lubricant to resist being washed off cylinder walls.

Corena K100 and K150 - pressures below 1,000 psi Corena K460 - pressures above 1,000 psi

55 gallon, 5 gallon

Shell Corena P 68, 100, 150 Stationary or mobile reciprocating air compressors. Offers excellent demulsibility, anti-wear properties and protection from rust and corrosion.

Atlas Copco, Dresser Rand, Sullari, Compare, Lubricant Standard ISO/DP 6521, DAH and DAG for rotary screws

55 gallon, 5 gallon

Shell Corena S 32, 46, 68 Mineral oil based lubricants developed specifically to meet the requirements of oil-flooded rotary air compressors. **Not recommended for use in breathing air compressors.

Atlas Copco, Dresser Rand, Sullari, Compare, Lubricant Standard ISO/DP 6521, DAH and DAG for rotary screws

55 gallon, 5 gallon

Shell Corena DE 100, 150 Fully synthetic lubricants designed for reciprocating compressors. Intended for both the crankcase and cylinders.

Viton, SBR, Buna-S, Buna-N 55 gallon, 5 gallon

Shell Corena PGE Synthetic fluids based on polyalkylene glycol and ester technology that are designed for use in rotary screw air (except breathing air) compressors.

55 gallon, 5 gallon

Heat Transfer Fluids


ExxonMobil Mobiltherm 600 Series: 603, 605

Heat transfer fluids intended for use in closed indirect heating installations.

Temperatures Ranges - Mobiltherm 603: Closed Systems (-7 Cel to 285 Cel), Open Systems (-7 Cel to 150 Cel); Mobiltherm 605: Closed Systems (-7 Cel to 315 Cel), Open Systems (-7 Cel to 180 Cel)

55 gallon

ExxonMobil Mobiltherm 43 Paraffinic type heat transfer fluid used in closed systems operating at higher temps.

High specific heat and thermal conductivity to provide more rapid heating and greater flexibility in a system.

55 gallon

Petro-Canada CALFLO HTF Premium high temperature transfer fluid with temperatures up to 326°C

55 gallon, 5 gallon

Petro-Canada CALFLO AF Recommended for systems requiring greater resistance to oxidations with temperatures to 316°C

55gallon, 5 gallon

Petro-Canada CALFLO LT Synthetic, suitable over wide range of operating temperatures 5°C to 260°C

55 gallon, 5 gallon

Petro-Canada PURITY FG Food grade approved for food processing industry with system operating temperatures to 326°C

55 gallon, 5 gallon

Petro-Canada PETRO-THERM General purpose fluid, provides economical service in various industrial processes

55 gallon, 5 gallon

Shell Thermia Oil C Thermally stable mineral oil containing an anti-oxidant designed for heat transfer applications

Temperatures as high as 600 degrees F in low pressure systems

55 gallon

Lubr

ican

tsRefrigeration Oils


ExxonMobil Gargoyle Arctic SHC 200 Series: 224, 226, 230, 234

Wax Free synthetic polyalphaolefin fluids. Severe service for refrigeration compressors and heat pumps.

ISO Grades: 224 = 29, 226 = 68, 230 = 220, 234 = 399

55 gallon, 5 gallon

ExxonMobil Gargoyle Arctic 155, C Heavy and 300

Napthenic mineral oil for use in refrigeration compressors, ammonia refrigerant.

ISO Grades: Arctic 155 = 32, Arctic C Heavy = 46, Arctic 300 = 68.

55 gallon, 5 gallon

Shell Clavus Oils Highly refined naphthenic base petroleum oils intended for use in compression refrigeration systems containing non-hydroflurocarbon refrigerants such as R-12, R-22, R-502 and ammonia

Suitable for CFC and HCFC refrigerants such as R-11, R-12, R-500, R-22, R-123

55 gallon, 5 gallon

Shell Clavus S 68 Highly refined paraffinic base stocks blended with a carefully balanced additive package designed to provide long service life and minimize system deposits. Specifically formulated to meet the demanding needs of rotary screw compressors used in commercial ammonia refrigeration systems.

Rotary screws, ammonia refrigeration compressors, hydraulic systems that operate below a maximum operating pressure of 1,000 psi

55 gallon, 5 gallon

Circulation Oils


ExxonMobil DTE Double Letter Series: AA , BB, HH & Extra Heavy

Heavy duty circulating oils designed for continuous reuse in circulating lubrication for gears and bearings.

ISO Grades: Extra heavy = 150, BB = 220, AA = 320, HH = 460.

55 gallon, 5 gallon

ExxonMobil DTE Named Series: Light, Medium, Heavy Medium and Heavy

Premium circulating oils designed for long service in continuous lubrication of pumps, and valves.

ISO Grades: Light = 32, Medium = 46, Heavy Medium = 68, Heavy = 100.

55 gallon, 5 gallon

Shell Morlina SD 100, 150, 220, 320, 460

Designed to provide excellent lubrication in many industrial applications. Provides low foaming tendencies and excellent water separation properties

Moroil Advanced Lubricant, ANSI/AGMA 9005 - E02

55 gallon, 5 gallon

Turbine Oils


ExxonMobil Mobil SHC 800 Series: 824 and 825

Severe industrial gas turbine application applications with a nominal 10,000 hour TOST life.

ISO Grades: 824 = 32, 825 = 46.

55 gallon

ExxonMobil DTE 832 and 846 Designed for use in steam turbines, gas turbines and combined cycle gas turbines.

ISO Grades: 832 = 32, 846 = 46.

55 gallon

ExxonMobil DTE 724 Developed for higher output gas turbines such as the General Electric Heavy Duty Gas Turbine Frame 7000.

ISO Grade = 31. Meets General Electric Specification GEK-32568C.

55 gallon

ExxonMobil DTE 732 and 746 Zinc free - specifically designed for gas and steam turbine applications.

ISO Grades: 732 = 32, 746 = 46.

55 gallon

Lubr

ican

ts


Petro-Canada Turboflo XL; 32, 46, 68 Premium turbine fluid designed to lubricate and cool steam and gas turbines

GEK 32568F, GEK, 46506D, GEK28143A; TVL 9013 04 (non EP), 1500 020, 55125Z3; ES 9-224V; HTGD 90117, K 110 812101; DIN 51515; D4304 Type I (non-EP)


Petro-Canada Turboflo EP; 32, 46 Designed for the lubrication of geared heavy duty gas turbines with common gear and bearing lubrication sytems

(same as Turboflo XL) Bulk, 55 gallon, 5 gallon

Petro-Canada Turboflo Specially designed to lubricate and cool steam and gas turbines and deliver excellent lubrication to bearings

(same as Turboflo XL) 55 gallon, 5 gallon

Shell Turbo T 32, 68, 100 Designed to provide excellent lubrication of steam turbines and many other industrial applications.

ANSI/AGMA 9005-D94, Alstom Power HTGD 90 117 and NBA P50001, Siemens TLV 9013 04, Cincinnati Lamb P-38, P-55, P-54, GEK 28143A, GEK 46506, GEK 32568F, etc.

55 gallon

Turbine Oils

Way Oils


ExxonMobil Vactra Oil Numbered Series: No. 1, 2, 3, 4

Specifically designed for accuracy and parts finish of today's high performance machine tools.

ISO Grades: 1 = 32, 2 = 68, 3 = 150, 4 = 220.

55 gallon, 5 gallon

Shell Vitrea 13, 22, 32, 46, 68, 100, 150, 320, 460

Highly refined, high viscosity index, mineral oils that give excellent lubricating performance where rust, oxidation and/or high bearing and gear loading are not problems.

Light duty hydraulic systems, plain and anti-friction bearings, bevel gears

55 gallon, 5 gallon

Spindle Oils


ExxonMobil Velocite Oil Numbered Series: No. 3, 6, 8, 10.

Designed for lubrication of high-speed spindles in machine tools. Also used in some critical hydraulic circulation systems and air line oilers.

ISO Grades: 3 = 2, 6 = 10, 8 = 15, 10 = 22.

55 gallon, 5 gallon

Residual Compound Oils


Shell Cardium Compound 14R and 15R

Diluted with a high flash solvent to allow for easier application. Suitable for the lubrication of ropes, chains, flexible couplings, gears, and sliding surfaces of drag lines and shoves, and open gears of min hoists, ball mills, rubber mixers, cement mills, clay products industries, construction equipment, dredging equipment and where a heavy adhesive oil is required.

ANSI/AGMA 14R, 15R 5 gallon

Shell Cardium Fluid M and Fluid H

Same as Cardium Compound but with easier application characteristics

5 gallon

Lubr

ican

ts

Open Gear Oil


Jax Big Jim Open Gear Lube (aerosol)

New open gear lube ideal for all open gear applications Any open gear Aerosol

Electrical Insulating Oils


Shell Diala AX Intended for use in transformers, circuit breakers, oil-filled switches and in X-Ray equipment

ANSI/ASTM D 3487, NEMA TR-P8-1975, US MILITARY VV-I-530A AND AMENDMENT 2 FOR CLASS AND CLASS II, NATO S-756, BRITISH BS 148:1972

55 gallon, 5 gallon

Electrical Discharge Machining Oils


Shell Macron EDM 135 A premium dielectric fluid for insulation and controlled dielectric discharge during electric discharge machining operations. Formulated with a highly refined paraffinic base stock, the product is colorless and virtually odorless.

55 gallon, 5 gallon

Rock Drill Oils


Chevron Rock Drill Oils Vistac ISO 150

Meets the lubrication needs of percussion rock drills and all air-operated tools. EP performance provides protection for the rock drill piston and against the heavy shock load this equipment experiences.

Meets the performance requirements of many rack drill manufactures, such as Ingersoll-Rand, Gardner-Denver, Sullivan, etc.

5 gallon

Shingle Oils


Chevron Shingle Oil Helps maintain the structural strength and stability of wood by reducing cupping, cracking, and splitting caused by exposure to sunshine and rain.

A low viscosity straw colored oil designed for treating cedar shakes, wooden fences, wooden siding, and log homes.

5 gallon

Metal Working Fluids


Chevron Soluble Oil B Product used in machine shops as a multifunctional cutting fluid. It is designed to cool and lubricate the contact point of the tool and work piece.

Recommended for all metals (except magnesium). Typically diluted in water/oil ratios ranging from 10:1 to 50:1.

5 gallon

Lubr

ican

ts

Bar & Chain Oils


Petro-Canada Duratac Oils; 32, 68, 100, 150

Tacky, “once-through” line for hand oiling log deck chains, in the lubrications of chains and chain saw bar, or in leaky, slow-speed journal bearings

55 gallon, 5 gallon

Petro-Canada Duratac Non-Drip; 32, 68, 100, 150, 220

High quality, formulated with a tackiness additive that adheres stroly to metal slurfaces.

55 gallon, 5 gallon

Petro-Canada Petroglide 68, 100, 150 Saw guide oil designed for use in modern multi-blade, gang saws and edgers

55 gallon, 5 gallon

Petro-Canada Petroglide MC 32 Premium bandsaw oil designed for mist lubricated bandsaws.

55 gallon, 5 gallon

Petro-Canada Petroglide XP 90 High performance saw guide oil for use with multi-blade gang saws and edgers

55 gallon, 5 gallon

Lubr

ican

ts

TurboPower, High QualityAntifreeze at Competitive Pricing!

Right...► Product► Place► Price

Turbo Power™ All season Engine Antifreeze/CoolantLow Silicate, Automotive plus Compatible with SCA’s for Heavy Duty Diesel applications.

Turbo Power ™ Extended Life Antifreeze/Coolant Meets GM6277M - Extended life performance of up to 5 years or 150K Miles, Amine, Borate, Nitrate, Nitrite, Phosphate, Silicate Free formulation

Turbo Power™ Heavy Duty Diesel Extended Life Antifreeze/CoolantNo SCA required on initial fill. Low Silicate, Phosphate and Amine Free. Aluminum compatible. Extended Service Life up to 6 years, 12K Hours, or 600K Miles.

RV Plumbing AntifreezeMinus 50 Degree Burst Protection, Ready-to-Use.

OEM™Global, Foreign & Domestic Passenger Vehicles & Light Duty Trucks. Guarantee of extended life performance up to 5 Years or 150K Miles, when added as initial fill or when added to a cooling system after complete drain, flush, and fill.

Turbo Power ™ Heavy Duty DieselLow Silicate, Heavy Duty Diesel applications, No SCA required on initial fill.

1-888-266-3030 | www.repowell.net | P.O. Box 98 | Grandview, WA

See the Ancillaries section for details on these products

Chain & Conveyor Oils


Jax Pyro-Kote Series Oils JAX Pyro-Kote® Series Oils provide high operational temperature ranges and unsurpassed thermal and oxidative stabilityperformance.

HIGH-FLASH, HIGH- TEMPERATURE, ANTIWEAR, SYNTHETIC POLYOL ESTER CONVEYOR CHAIN LUBRICANTS

275 Gal Tote, 110 Gal Tote, 55 Gal Drums, 16 Gal Kegs, 5 Gal Pails, 4-1 Gal Cases

Jax Pyro-Kote Series WPV JAX Pyro-Kote WPV Series are specially formulated 100% synthetic lubricants designed to provide superior lubrication and protection to oven chains, slides and gears in industrial applications to temperatures of 500°F (260°C) with proper lubricating intervals. The high smoke, flash and fire points of JAX Pyro-KoteWPV help alleviate concerns of fire hazards associated with inferior fluids

SPECIALIZED, EXTREME HIGH-TEMPERATURE 100% SYNTHETIC CHAIN & CON-VEYOR LUBRICANT



VP Racing Fuel C11 Recommended for CRs up to 12:1 with restrictor plates and standard flow heads. With unrestricted heads and manifolds and carburetors. C11 works well to 11:1. significant HP and torque increases.

Color Orange or PurpleMotor Octane 104Specific Gravity .710 at 60 degrees

5 gal, 54 gal

VP Racing Fuel C12 The best all around racing fuel made. Rcommended for CRs below 15:1, satisfying the needs of 75% of todays race engines. One of the winningest fuels in racing history.

Color GreenMotor Octane 108Specific Gravity .717 at 60 degrees

5 gal, 15 gal, 30 gal, 54 gal

VP Racing Fuel C14 Recommended for naturally aspirated engines operating at over 8000RPMs with CRs of 14:1 and over in drag race cars, 4-stroke drag race motorcycles, snowmobiles and PWCs (230 psi or higher).

Color YellowMotor Octane 114Specific Gravity .696 at 60 degrees


VP Racing Fuel C14 Plus Recommended for high RPM engines with ultra high CRs over 14:1 when additional octane is required for better detonation protection, while maintaining the same burn rate and specific gravity of C14

Color clearMotor Octane 115Specific Gravity .696 at 60 degrees


VP Racing Fuel C15 Used in large (500 CI or greater) normally aspirated engines with ultra high CRs of 14:1 or greater. Can also be used in smaller nitrous systems. Very consistent fuel, excellent for bracket racing.



VP Racing Fuel C16 Used in turbocharged engines, blown engines and nitrous applications with CRs up to 17:1. recommended by the top nitrous oxide companies.



VP Racing Fuel C19 Used in high RPM, normally aspirated drag race applications with CRs up to 17:1.

Color YellowMotor Octane 116Specific Gravity .695 at 60 degrees


VP Racing Fuel C23 Recommended for ultimate performance in nitrous oxide applications with CRs up to 17:1.

Color Blue Motor Octane 119Specific Gravity .713 at 60 degrees


VP Racing Fuel C25 Recommended for CRs up to 16:1. Color YellowMotor Octane 113Specific Gravity .695 at 60 degrees


VP Racing Fuel C44 Produces significantly more HP and torque over all other nonoxygenated fuels. Impressive results in normally aspirated ingines with CRs form 9:1 to 17:1 in drag race and oval track qualifying applications.

Color PurpleMotor Octane 99Specific Gravity .744 at 60 degrees


VP Racing Fuel Methanol M1 M1 racing methanol has a 99.95% minimum purity, the highest purity available in the U.S. With M1, engines run cooler and are less subject to corrosion. Recommended for all methanol-legal racing applications.

Color Clear Motor OctaneSpecific Gravity .795 at 60 degrees


VP Racing Fuel Methanol M3 Like M1, M3 racing methanol starts with methanol of the highest purity, but includes lubrication and combustion additives for an extra boost. M3 offers a wider range of jetting options, making jettin easier and more consistent. M3 makes more power and yields better throttle responce than any standard methanol on the market.

Color ClearMotor OctaneSpecific Gravity .784 at 60 degrees

5 gal, 54 gal

VP Racing Fuel Methanol M5 M5 is simply the best preforming methanol on the market. With its upgraded combustion additives, M5 will make more power than M3, while offering the same or better protection against detonation.

Color ClearMotor OctaneSpecific Gravity .816 at 60 degrees

5 gal, 54 gal

VP R

acin

g Fu

el

Leaded Fuel

Manufacturerr Product Name Product Comments Specifications Container SizeVP Racing Fuel Late Model Plus Recommended for use on 3/8 mile or greater dirt

and asphalt circle tracks in engines bigger than 400 CI with CRs of 15:1 or greater. Burns cooler, making as much power on the 100th las as on the first. Works well with nitrous systems up to 200 HP and CRs lower than 13:1 in drag applications.

Color AquaMotor Octane 113Specific Gravity .727 at 60 degrees


VP Racing Fuel NO2 Recommended for fogger or thre stage nitrous oxide applications with CRs up to 18:1. higher octane and lower specific gravity than most nitrous fuels.

Color Clear Motor Octane 120.3Specific Gravity .699 at 60 degrees


VP Racing Fuel MR-8 For use in 125 and 250 GP 2-stroke bikes and karting applications requiring high octane values.

Color ClearMotor Octane 107Specific Gravity .696 at 60 degreesOxygenated: Yes


VP Racing Fuel MR-9 Designed for 4-stroke applications that can tolerate lower octane values. Makes up to 8% more power than pump gas and up to 2% more power than MRX01.

Color ClearMotor Octane 87Specific Gravity .718 at 60 degreesOxygenated: Yes


VP Racing Fuel MR-11 Recommended for 4-stroke applications where octane requirments are fairly low, e.g. supersport, superbike, formula extreme, supermoto and MX. 6% more power than pump gas and any basic nonoxygenated racing fuel.

Color YellowMotor Octane 90Specific Gravity .749 at 60 degreesOxygenated: Yes


VP Racing Fuel MRX01 For 2 and 4-stroke applications requiring the bower of MR1 but higher octane values. Clean burning. Can be mixed with MR8 to raise octane level for specific applications.

Color PinkMotor Octane 98Specific Gravity .717 at 60 degreesOxygenated: Yes


VP Racing Fuel VP Red A great standard grade of racing fuel. Used in higher compression race ingines up to 13:1, for any application where cost is a factor.

Color RedMotor Octane 105Specific Gravity .730-.745 at 60 degrees


VP Racing Fuel U4.2 The latest generation of our U4 based fuels, this fuel is a direct pour-in replacement for pump gas, with little to no jetting changes required - +2 main jest and +2 pilot jets at the most. Makes power equivalent to U4 with no sticky residue and a less pumgent odor. Makes up to 6% more power than pump gas.

Color BlueMotor Octane 102Specific Gravity .784 at 60 degreesOxygenated: Yes


VP Racing Fuel Motorsport 98L Designed for lower compression engines in racing series that require a cost effective controlled fuel.

Color Light BlueMotor Octane 96Specific Gravity .715 at 60 degrees


VP Racing Fuel Motorsport 105L Formulated for stock applications with CRs below 11:1 e.g., Stock eliminator type racing engines. Offers the benefits and octane of a leaded fuel at a lower cost than more exotic race fuels.

Color OrangeMotor Octane 101Specific Gravity .753 at 60 degrees R+M/2 105


VP Racing Fuel VP-110 Not your stanard 110! Highest rated MON of any 110 fuel on the market. Formulated for use in naturally aspirated engines with CRs up to approximately 12:1 - 13:1. Works well in 2-strokes.

Color PurpleMotor Octane 107Specific Gravity .720 at 60 degrees R+M/2 110


Leaded FuelVP

Rac

ing

Fuel

Unleaded Fuel

Manufacturer Product Nameuct Product Comments Specifications Container Size

VP Racing Fuel M8-1 Used in FIM MX and road race competition. Designed and specifically formulated to maximize power and performance.

Color Yellow Motor Octane 89Research Octane 99Oxygenated: YesDensity .739kg/m3 at 15 degrees C


VP Racing Fuel Motorsport 93 Designed for lower compression engines in racing series that require a cost effective controlled fuel.

Color Blue Motor Octane 90Specific Gravity .744 at 60 degrees R+M/2 95


VP Racing Fuel Motorsport 100 Oxygentated with ethanol, and is specially engineered for high performance street cars. Applications from 4 to 12 cyclinders or engines equipped wit turbocharger, supercharge or nitrous oxide systems. Generates up to 14% more HP. Designed for use in cast iron head engines with CRs up to 13:1 and aluminum head engines up to 14:1.

Color OrangeMotor Octane 96Specific Gravity .746 at 60 degrees R+M/2 100Oxygenated: Yes


VP Racing Fuel Motorsport 101 Designed for CRs up to 13:1 in cast iron head engines and up to 14:1 with aluminum heads, MS101 is particularly effective in turbo and supercharged applications. Allows an inccrease in timeing and more powerful nitrous oxide systems, with substantial power increases compared to premium pump gas. No metal compounds and wont harm catalytic converters or oxygen sensors.

Color YellowMotor Octane 99Specific Gravity .800 at 60 degreesOxygenated: Yes


VP Racing Fuel Motorsport 103 Provides power and protection equal to some leaded racing fuels. Compared to MS101, it allows even more aggressive timing and higher compression, up to 14:1 in cast iron head engines and up to 15:1 with aluminum heads. Can allow doubling of stock boost. No metal compounds and wont harm catalytic converters or oxygen sensors.

Color RedMotor Octane 99Specific Gravity .743 at 60 degreesOxygenated: YesR+M/2 103


VP Racing Fuel Motorsport 109 Provides more power than any other unleaded fuel. Recommended for higher boost applications with CRs up to 11:1 or naturally aspirated engines up to 13:1

Color ClearMotor Octane 101Research Octane 109Specific Gravity .722 at 60 degrees Oxygenated: YesR+M/2 105


VP Racing Fuel SV-05 Developed for European drag race, oval track, road race and off road high performance engines. This Oxygenated product makes a big HP and torque gains on and off the track.

Color ClearMotor Octane 98Density .745kg/m3 at 15 degrees C Oxygenated: Yes


VP R

acin

g Fu

el

Accessories


VP Racing Fuel Utility Jugs VP Jugs are the most durable on the market. They are high density polyethylene ergonomically designed and DOT legal.

Round & Square. Multiple colors. 5 gal

VP Racing Fuel Jug Accessories Jug cap, vent cap, deluxe jug tube

Oils and Lubes


VP Racing Fuel Racing Synthetic Oils 10W40, 10W50

100% ester synthetic for maximum HP and protection. Exceeds API standards and is superior to most petroleum oils for firm strength. Offers increased fuel economy and maximum HP.

12x1 quart case

VP Racing Fuel Chain Glide Paraffin wax based chain lubricant. Fling, water and rust resistant. O-ring chain safe.

VP Racing Fuel Gear Lube 100 Semi synthetic gear lubricants for improved effciency and fuel economy. Offers less wear and cooler operating temperatures in limited slip or conventional differentials, manual transmissions or manual transaxles.

Color YellowViscosity: 75W90

VP Racing Fuel Gear Lube 150 Semi synthetic gear lubricants for improved effciency and fuel economy. Offers less wear and cooler operating temperatures in limited slip or conventional differentials, manual transmissions or manual transaxles.

Color RedViscosity: 80W140

VP Racing Fuel M2 Upper Lube Protects valves, guides, cylinder walls, fuel pumps and aluminum fuel systems for methanol powered engines. Leaves a thin film of lubrication to protect against corrosion between races. Its electrochemical plating technology is a big improvement over just using oi. Extends pump life.

VP Racing Fuel MTF1 Transmission Oil

Reduces fluid drag, clutch wear and slippage. Improves power and extends gear life. Preforms better than motor or gear oils in transmission-wet clutch units.

VP R

acin

g Fu

elTransmission and Torque Fluids


Jax Multitran III A.T.F. JAX MultiTran III A.T.F. is a multi-purpose power transmission fluid designed for most power transmission and hydraulic systems.

GM DEXRON® III, FORD MERCON® AND ALLISON C-3, C-4 PERFORMANCE

276 gal, 110 gal, 55 gal, 16 gal, 5 gal

Jax Unitran Fluid JAX Unitran Fluid is the premium tractor hydraulic/transmission oil for modern farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations,

HYDRAULIC/TRANSMISSION FLUID USDA H2


Jax Unitran Fluid HD JAX Unitran Fluid HD is our newest premium tractor hydraulic/transmission oil for modern fleet, farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations, gear box applications and transmission fluid requirements,

HEAVY DUTY UNIVERSAL HYDRAULIC/TRANSMISSION FLUID


Jax Unitran FG JAX Unitran FG is the only NSF H1-Registered formulated tractor hydraulic/transmission oil for modern farm and industrial equipment. Engineered specifically to meet both the USDA Incidental Food Contact regulations.

HYDRAULIC/TRANSMISSION FLUID NSF H1


Gear Oils


Jax Multi-Purpose Gear Oils

JAX Multi-Purpose Gear Oils are extreme-pressure lubricants engineered specifically to meet the high-temperature/high-load demands of today's geared equipment. JAX Multi-Purpose Gear Oils, based on hydrocracked/isodewaxed Group II base oils, don't break down in extreme heat and form damaging deposits, varnish and sludge as readily as typical Group I commodity gear lubricants.

API MT-1, Auto Specification PI GL-4 and GL-5, MIL PRF-2105E, Mack GO-J, GO-J Plus, GM 12346190, Ford M2C197-A, M2C201A, Rockwell 0-76-E, 0-76-L, Chrysler MS-8985, MS-9070, Eaton/Fuller PS-037A, PS-109

2000 lb, 400 lb, 120 lb, 35 lb

Jax H-P Industrial Gear Oils

JAX H-P Industrial Gear Oils are made from shear stable, high quality hydrocracked/isodewaxed Group II base oils and are fortified with additives that deliver high performance in industrial gear applications. These oils are designed to reduce maintenance costs by extending drain intervals and protecting against wear, pitting and rust.

U.S. Steel 224, AGMA 250.04, AGMA 9005-D-94, DIN 51517 Part 3, David Brown ET 33/80, 51, 53 and 01, Cincinnati Milicron P-35, P-59, P-63, P-74, P-76, P-77 and P-78

2000 lb, 400 lb, 120 lb, 35 lb

Jax Worm Gear Lube XC JAX Worm Gear Lube XC is a premium lubricant designed and recommended for enclosed worm gear box lubrication and steam cylinders. JAX Worm Gear Lube XC is formulated with select base oils which possess inherent oxidation resistant properties. It is compounded with acidless tallow oil to enhance component protection by providing superior film-forming characteristics.

HIGH-PERFORMANCE COMPOUNDED WORM GEAR LUBRICANT

2000 lb, 400 lb, 120 lb, 35 lb

Jax Super Cylinder Oil JAX Super Cylinder Oil is a premium lubricant designed and recommended for enclosed worm gears and steam cylinders. JAX Super Cylinder Oil is formulated with select base oils which possess inherent oxidation resistant properties. It is compounded with acidless tallow oil to enhance component protection by providing enhanced film-forming characteristics.

USDA H2 CYLINDER OIL 2000 lb, 400 lb, 120 lb, 35 lb

Food

Gra

de L

ubric

ants


Jax Magna-Plate Gear Oils JAX Magna-Plate Gear Oils are specially formulated with a friction-modifying molybdenum disulfide-enhanced additive system. These extreme-pressure-enhanced lubricants are engineered specifically to exceed the high load requirements of today's most demanding geared equipment.

Auto Specification API GL-4 and GL-5, MIL PRF-2105E, Mack GO-J, Go-J Plus, GM 12346190, Ford M2C197-A, M2C201A, Rockwell 0-76-E, 0-76-L, Chrysler MS-8985, MS-9070, Eaton/Fuller PS-037A

2000 lb, 400 lb, 120 lb, 35 lb, 4-1 gal case

Jax Magna-Plate MV Gear Oils

JAX Magna-Plate MV Gear Oils are specially formulated with an advanced organo-molybdenum additive system to provide molybdenum-enhanced performance to systems unable to utilize lubricants containing molybdenum disulfide (MoS2) solids (i.e. centralized lubrication systems).

FRICTION MODIFIED, HD GEAR OILS NSF/USDA H2

2000 lb, 400 lb, 120 lb, 35 lb

Jax Syngear Industrial Gear Oils

JAX Syngear Industrial Gear Oils are made from 100% high quality synthetic base stocks and premium performance additive systems. JAX Syngear Industrial Gear Oils prevent wear and protect equipment by maintaining viscosity, resisting thermal and oxidative breakdown, incorporating antiwear additives, preventing rust, and resisting the degrading effects of water.

Denison HF-0, HF-1, HF-2, Vickers M-2950-S, I-286-S, Cincinnati Milacron P-68, P-69, P-70, U.S. Steel 127 and 136, Ford M-6C32, GM LH-04-1, LH-06-1, LH-15-1, Lee Norse 100-1, Jeffrey No. 87, BF Goodrich 0152, Commercial Hydraulics

2000 lb, 400 lb, 120 lb, 35 lb

Jax Magna-Plate FG ISO Gear Oils

JAX Magna-Plate 220FG, 320FG & 460FG are state-of-the-art NSF H1 food-grade gear oils incorporating the latest developments in food-grade lubrication technology. JAX Magna-Plate 220FG, 320FG & 460FG are formulated with: • HVI White Oils • Synthetic Viscosity Modifiers • Antiwear Additives • Extreme-Pressure Additives • Rust & Oxidation Inhibitors

PARTIAL SYNTHETIC, NSF H1, HIGH-PERFORMANCE, E.P. FOOD-GRADE GEAR OILS MEETING 21 CFR 178.3570

2000 lb, 400 lb, 120 lb, 35 lb

Jax Cylinder Oil FG JAX Cylinder Oil-FG is a state-of-the-art gear oil incorporating the latest developments in food-grade lubrication technology. JAX Cylinder Oil-FG is formulated with: • Oxidation Inhibitors • Antiwear Additive • Extreme-Pressure Additives • Lubricity Compounds • Viscosity Index Modifiers

HIGH-PERFORMANCE CYLINDER/GEAR OIL NSF H1-REGISTERED

2000 lb, 400 lb, 120 lb, 35 lb

Jax Flow-Guard Synthetic Fluids

JAX Flow-Guard Synthetic Series Food Grade Fluids are for use in industrial hydraulic, gear drive and other lubricated machinery performing a variety critical functions. Not only do they serve as a medium for energy transfer, but also as the lubricant, sealant, and heat transfer fluid for the components.

100% PAO BASED SYNTHETIC, NSF H1 FOOD GRADE LUBRICATING FLUIDS

2000 lb, 400 lb, 120 lb, 35 lb

Jax Perma-Gear FG Fluids JAX Perma-Gear FG Fluids are state-of-the-art fluids incorporating the latest developments in 100% synthetic food plant lubrication technology. The base fluids used are linear polymers of ethylene and propylene oxide, commonly known as Polyalkylene Glycols.

HIGH-TEMPERATURE, FOOD GRADE H1 100% PAG SYNTHETIC, E.P. GEAR OILS

2000 lb, 400 lb, 120 lb, 35 lb

Jax FGG-AW Series Gear Oils

JAX FGG-AW Series food-grade gear oils are compounded with advanced additive technologies to provide superior performance over competitive food-grade gear oils. They contain proprietary, optimized combinations of antiwear agents, rust inhibitors, and polymeric viscosity improvers that provide outstanding long-term wear advantages over other food-grade gear oils, while their robust antioxidant chemistry ensures deposit-free operation.

USDA/NSF H1 AUTHORIZED FOOD-GRADE PREMIUM GEAR OILS, NSF H1-REGISTERED

2000 lb tote, 400 lb drum, 120 lb keg, 35 lb pail, 4-1 gal case

Gear OilsFo

od G

rade

Lub

rican


Petro-Canada Purity FG EP Gear Fluids; 100, 150, 220, 320, 460

Long lasting protection of enclosed gear drives. Food Industry Approved 55 gallon, 16 gallon, 5 gallon

Petro-Canada Purity FG Synthetic EP Gear Fluid; 220

Outstanding lubrication in food processing applications running under heavier loads or subject to high or low temperature extremes; fortified with additives to resist oxidation and protection from wear and shock loading.

Food Industry Approved 55 gallon, 16 gallon, 5 gallon

Shell Shell Cassida Fluids GL 150, 220, 320, 460 680

Shell Cassida® Fluids GL are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by NSF (Class H1) for use where there is potential for incidental contact with food.

NSF H1, Kosher, Halal, ISO/DP 6743/6, DIN 51517 CLP, DIN 51506 VBL (GL 150, 220), DIN 51506 VCL (GL 150)


Shell Shell Cassida Fluids GLE 100, 150, 220

Shell Cassida® Fluids GLE is fully synthetic, high performance, anti-wear gear lubricants that were specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Registered by the NSF (Class H1)



Shell Shell FM Gear Oil 220, 460

Shell FM Gear Oils provide lubrication of gear systems, as well as, circulating oil systems and pump bearings. They are formulated with good water separation characteristics, oxidation stability and foaming resistance.



Gear Oils

Greases


Jax Magna-Plate 8 JAX Magna-Plate 8 is the preferred choice for high performance in high-speed meat saws and knives. It provides greatly enhanced rust protection, high levels of antiwear performance, and a thickener technology with inherent water resistance. It has excellent pumpability and flow characteristics, and gives superior rust and antiwear protection.

NSF H1-REGISTERED FOOD-GRADE GREASE FOR FOOD-PROCESSING EQUIPMENT

2000 lb, 400 lb, 120 lb, 35 lb, 50 cartridge case, 10 cartridge pack

Jax Magna-Plate 22 This is the very unique 100% synthetic grease formulated for freezers and other applications where temperatures can approach minus 50 degrees F and lower. It possesses excellent wear and rust protection in an extremely pumpable grease.

EXTREME LOW TEMPERATURE, 100% SYNTHETIC NSF-H1 REGISTERED FOOD MACHINERY GREASE


Jax Magna-Plate 36-1, 36-2

These greases are the industry standard for high performance Food-Grade grease with unsurpassed anti-wear protection and water resistance. JAX Magna-Plate 36 is also very resistant to salt, chemicals, rust and heat. Ideal for a wide variety of food plant applications from closing machines to meat saws, and where temperatures can exceed 300 degrees F.

USDA H-1 2000 lb, 400 lb, 120 lb, 35 lb, 50 cartridge case, 10 cartridge pack

Jax Magna-Plate 44-0, 44-1, 44-1

JAX Magna-Plate 44-0 is an Advanced Technology NLGI #0 Food-Grade grease formulated for centralized lubrication systems on high speed can closing equipment and other food, drug

HIGH-PERFORMANCE NSF-H1 GREASES FOR FOOD AND BEVERAGE PROCESSING EQUIPMENT - WITH MICRONOX®


Food

Gra

de L

ubric

ants


Jax Poly-Guard FG LT,2 This is a Food-Grade lubricant that provides performance higher than anything the industry has ever seen before. It has a new advance technology thickener, greatly enhanced rust protection, and the highest level of E.P and anti wear performance available. Other features include excellent pumpability, seperatuion control, and easier clean up for sanitation.

ADVANCED ANTIWEAR NSF H-1 FOOD MACHINERY GREASE WITH PTFE AND MICRONOX® TECHNOLOGY


Jax Halo-Guard FG Greases

JAX Halo-Guard FG is a revolutionary food-grade grease manufactured with an advanced, proprietary calcium sulfonate complex thickener. This newly enhanced thickener technology Halo-Guard FG has excellent water resistance and outstanding ability and remarkable rust and corrosion control. In addition,

NSF H1 FOOD-GRADE, HIGH-TEMP, CORROSION CONTROL GREASE WITH E.P. AND ANTIWEAR


Jax Halo-Guard FG-PM Grease

JAX Halo-Guard FG-PM satisfies the lubricant demands in nearly any heavily loaded food-plant machinery application. This makes JAX Halo-Guard FG-PM the ideal grease for difficult, highly loaded, greased gear and bearing applications. As a ‘Heavy-Duty’ food-grade grease,

FOOD-GRADE, HIGH-TEMP, HEAVY DUTY H1 GREASE WITH E.P. AND ANTIWEAR


Jax Clear-Guard FG-2 This translucent grease was compounded with a special high-temperature polymer that will cling to metal surfaces under the most severe conditions. Waters, salts, heat, and chemicals will not affect performance and it resists sling and channeling under high speed or high temperature conditions.

HIGH-TEMP, TRANSLUCENT USDA-H1 GREASE WITH E.P. AND POLYMER ADDITIVES Specification


Jax Oven Ice FG-2 JAX Oven Ice FG-2 is a 100% PAO synthetic, inorganic-based, non-melting food-grade NSF H1 grease suitable for the many lubrications applications in the food-processing industry, as well as on the related ovens and kilns.

100% SYNTHETIC, CRYSTAL CLEAR, NON-MELT, USDA/NSF H1 FOOD-GRADE GREASE


Jax Gear-Guard FG Jax Gear-Guard FG is a new development in open gear lubrication formulated to provide ultimate performance in severe applications in food and beverage plant environments.

100% SYNTHETIC, NSF H1-REGISTERED OPEN GEAR GREASE NOW WITH MICRONOX® TECHNOLOGY


Jax Magna-Plate 300 This is a high-temperature grease with enhanced oxidation and anti-wear properties, containing 3% technical grade Molybdenum Disulfide and other solids. Magna-Plate 300 will outperform all conventionally thickened greases that are exposed to high temperatures for extended periods. This dramatically reduces caking and carbonized deposits.

HIGH-TEMPERATURE EXTENDED-PERFORMANCE GREASE WITH MOLYBDENUM DISULFIDE. NSF-H2 AUTHORIZED


GreasesFo

od G

rade

Lub

rican


Jax Magna-Plate 500-0, 500-1, 500-2

Water Resistant technology makes this one fo the world's most water resistant greases. Excellent general plant grease for wear protection, rust and water problems, and multi-purpose applications. Magna-Plate 500 is known throughout the industry for outstanding performance.

HEAVY-DUTY, SUPER WATER-RESISTANT USDA/NSF H-2 GREASE


Jax Magna-Plate 800-1 & 2 Severe-duty greases with excellent cohesive and adhesive characteristics. Extreme pressure, extraordinary anti-wear properties, and excellent shear stability are the features that have made Magna-Plate 800 the absolute best solution to problem lubrication of heavy-duty equipment when loads are over design limits.

HIGH LOAD-CARRYING, HEAVY-DUTY, WATER-RESISTANT LUBRICATING GREASE.


Jax Magna-Plate 1000-1 & 2

JAX Magna-Plate 1000 is an antiwear, polymer enhanced, high-temp, lubricating grease with extreme pressure additives. Its oxidation resistance makes it one of the best multi-purpose grease for plant equipment and vehicles with high-temperature requirements. Formulated from the finest raw materials and advanced E.P. additive technology,

HIGH-TEMPERATURE EXTENDED-PERFORMANCE GREASES WITH E.P. AND WATER REISTANT POLYMER. NSF-H2


Jax Magna-Plate 1100 JAX Magna-Plate 1100 is the ideal grease for complete corrosion control in areas of high salt and chemical contamination. It is a proven high-performance multi-purpose grease. It effectively withstands corrosion caused by salt water, salt air, and atmospheric chemicals.

HIGH-PERFORMANCE, CORROSION-CONTROL GREASE USDA H2


Jax Pyro-Plate EPN-2 JAX Pyro-Plate EPN-2 is the first in our new series of semi-exotic, high performance synthetic greases for a multitude of severe industrial applications. It contains an advanced, 100% synthetic base fluid for enhanced thermal stability and reduced energy consumption.

100% SYNTHETIC, HIGH-TEMP, HIGH-PERFORMANCE GREASE, WITH ENHANCED E.P. AND RUST & CORROSION CONTROL


Jax Magna-Plate 1200 JAX Magna-Plate 1200 is an extreme-high-temperature synthetic grease. It is a highly thermally-stable product with excellent oxidation stability and lubrication properties. Its typical applications include kilns, soot blowers, steel mills, barrier coatings and all high-temperature lubrication areas. It is particularly suitable in areas currently using silicone greases.

EXTREME HIGH TEMPERATURE GREASE WITH 100% SYNTHETIC ESTER BASE FLUID


Jax Poly-Plate EP JAX Poly-Plate EP Series of greases utilizes next generation, polyurea-based thickener technology which is designed specifically to enhance the performance and reliability of electric motor bearings and ball or lightly-loaded roller bearings operating at high temperatures.

SHEAR-STABLE, LONG-LIFE POLYUREA GREASE


Jax Robo-Guard 00 JAX Robo-Guard 00 is a grease manufactured with and advanced, proprietary thickener. This newly enhanced technology provides exceptional mechanical stability, very high load-carrying ability and remarkable rust and corrosion control.

ADVANCED ROBOTIC DRIVE CASE GREASE WITH CORROSION CONTROL, E.P. AND ANTIWEAR


Jax Gear Guard Synthetic JAX Gear-Guard Synthetic is a new development in open gear lubrication formulated to provide ultimate performance in severe applications. The base fluid is an ashless synthetic with a broad temperature range and superior water resistance to handle the toughest environments.

NSF H2-REGISTERED SYNTHETIC OPEN GEAR COMPOUND


Greases

Food

Gra

de L

ubric

ants


Petro-Canada Purity FG Machine Grease; FG, FG 00, FG 2, FG Extreme, FG Clear

Advanced formulated to deliver superior performance and food grade purity.

Food Industry Approved 55 gallon, 16 gallon, 5 gallon

Shell Shell Cassida Grease EPS 00, 1, 2

Shell Cassida Grease EPS 00, 1 and 2 are very high performance extreme pressure lubricants specially blended for the grease lubrication of machinery used in food and beverage processing and packaging industry. They are based on an aluminium complex thickener, synthetic fluid and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Registered by NSF (Class H1) for use where there is potential for incidental contact with food. These products meet the former guidelines (1998) of the US Dept. of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use.


Shell Shell Cassida Grease HTS 2

Shell Cassida Grease HTS 2 is a high performance, high temperature lubricant specially blended for the grease lubrication of machinery used in food and beverage processing and packaging industry. It is based on a bentone thickener, synthetic fluid and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Registered by NSF (Class H1) for use where there is potential for incidental contact with food. This product meets the former guidelines (1998) of the US Dept. of Agriculture Food (USDA) for H1 use.


Shell Shell Cassida Grease RLS 0, 1, 2

Shell Cassida® Greases RLS 0, 1, and 2 are specially blended for the grease lubrication of machinery used in the food industry. They are based on an aluminum complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Registered by NSF (Class H1) for use where there is potential for incidental contact with food. This product meets the former guidelines (1998) of the US Dept. of Agriculture Food (USDA) for H1 use.


GreasesFo

od G

rade

Lub

rican

tsHydraulic Oils


Jax Premium Hydraulic Oil JAX Premium Hydraulic Oils are shear-stable, long-life lubricants based on high quality hydrocracked/isodewaxed Group II base oil technology. These oils are formulated with a premium additive system that inhibits oxidation (preventing acid and viscosity increase), inhibits rust, and inhibits foam (preventing spongy hydraulics).

Denison HF-0, HF-1 and HF-2,Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69 and P-70, U.S. Steel 127 and 136, Racine, variable volume vane pumps, DIN 51524, Part 2, AFNOR E 48-603, Ford M-6C32, GM LH-04-1, LH-06-1 and LH-15-1, Lee Norse 100-1, Jeffrey No. 87, BF Goodrich 0152, Commercial Hydraulics

275 gal, 110 gal, 55 gal,16 gal, 5 gal

Jax Hydra-Plate Fluids JAX Hydra-Plate Fluids are made from high quality hydrocracked / isodewaxed Group II base stocks and utilize a premium additive system. This product prevents wear and protects equipment by maintaining its viscosity, resisting thermal and oxidative breakdown, incorporating antiwear additives, preventing rust, and resisting the degrading effects of water.

Denison HF-0, HF-1 and HF-2,Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69 and P-70, U.S. Steel 127 and 136, Racine, variable volume vane pumps, DIN 51524, Part 2, AFNOR E 48-603, Ford M-6C32, GM LH-04-1, LH-06-1 and LH-15-1, Lee Norse 100-1, Jeffrey No. 87, BF Goodrich 0152, Commercial Hydraulics

275 gal, 110 gal, 55 gal

Jax Premium Hydraulic Oil -Type Z

JAX Premium Hydraulic Oil - Type Z is a multigrade hydraulic fluid recommended for hydraulic systems that are subject to wide variations in ambient and system-operating temperatures. It provides a wide temperature-operating window by resisting change in viscosity due to temperature changes.

Denison HF-0, HF-1 and HF-2, Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69, P-70, U.S. Steel 127 and 136, Racine, variable volume vane pumps, DIN 51524, Part 2, AFNOR E 48-603, Ford M-6C32, GM LH-04-1, LH-06-1 and LH-15-1, Commercial Hydraulics

16 gal, 5 gal

Jax Enviro-Guard Fluids JAX Enviro-Guard Hydraulic Fluids are fully treated anti-wear, anti-foam, and rust & oxidation inhibited oils blended from the high-quality synthetic ester base stocks with excellent stability and high viscosity index. The premium additive package provides outstanding thermal stability, excellent rust prevention and anti-wear capabilities, and good demulsibility properties.

Vickers M-2950-S, 1286-S, Rexnord, Denison Pump HF-2, HF-1, HF-0, Racine Pump, Cincinnati Milacron P-68, P-69, P-70, Commercial Shearing

275 gal, 110 gal, 55 gal

Jax Magna-Plate 60 Series Hydraulic fluids used in industrial hydraulic systems perform many critical functions. Not only do they serve as a medium for energy transfer, but also as the lubricant, sealant, and heat transfer fluid for the system. Hydraulic fluid must also maximize power and efficiency by minimizing component wear and system “downtime”. Critical performance features include improved sealing effect, reduced adhesive and starting friction, reduced operational wear and minimal sludge or deposit generation.

NSF H1 Authorized, Kosher and Pareve Certified, Compliant with FDA 21 CFR 178.3570, Lubricants with Incidental Food Contact, Denison HF-0, HF-1 and HF-2, Racine Variable Volume Vane Pumps, Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69, and P-70, U.S. Steel 127 and 136

16 gal, 5 gal

Food

Gra

de L

ubric

ants

Compressor Oils


Chevron Food Processing Oil ISO 68

Used for lubricating rotary screw, reciprocating, or rotary vane compressors in ammonia refrigeration systems.

Meets the following manufacturer specifications: 1) Frick No.3 Oil, 2) FES No.1Oil. NSF registered as H2 (no possibility of food contact). Also approved for use in 1) Vilter and Sabroe refrigeration compressors.

55/1 gallon drum

Chevron Lubricating Oil FM ISO 100

Industrial lubricant designed for use in food processing and other sensitive industries where incidental food contact may occur. Contains a biocide to prevent growth of mold.

Conforms to U.S. FDA requirements of lubricants with incidental food contact may occur (H1) in and around food processing areas.

5/1-pail

Petro-Canada Purity FG Compressor Fluid; 32, 46, 68, 100

Applications include the lubrication of air compressors and vacuum pumps

Food Industry Approved 55 gal, 16 gal, 5 gal


Jax FGH-AW Series Hydraulic Oils

JAX FGH-AW Series food-grade hydraulic fluids are compounded with advanced additive technologies to provide superior performance over competitive food-grade hydraulic oils. They contain proprietary, optimized combinations of antiwear agents, rust inhibitors, and polymeric viscosity improvers that provide outstanding long-term wear advantages over other food-grade hydraulic oils, while their robust antioxidant chemistry ensures deposit-free operation.

Denison HF-0, HF-1 and HF-2, Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69 and P-70, U.S. Steel 127 and 136, DIN 51524, Part 2, Micronox® Technology

275 gal, 110 gal, 55 gal


JAX Flow-Guard Synthetic Series Food Grade Fluids are for use in industrial hydraulic, gear drive and other lubricated machinery performing a variety critical functions. Not only do they serve as a medium for energy transfer, but also as the lubricant, sealant, and heat transfer fluid for the components.

USDA/NSF H1 Authorized, Kosher and Parve Certified, Compliant with FDA 21 CFR 178.3570, Lubricants with Incidental Food Contact, Denison HF-0, HF-1 and HF-2, Racine Variable Volume Vane Pumps, Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69, and P-70, U.S. Steel 127 and 136

16 gal, 5 gal

Petro-Canada Purity AW Hydraulic Fluids; 32,46, 68, 100

Formulated for long lasting in food processing and pharmaceutical operations

Food Industry Approved 55 gal, 16 gal, 5 gal

Shell Cassida Fluids HF Shell Cassida® Fluids HF are specially developed lubricants for use in machinery used in the food and beverage processing and packaging industry. They are high performance, anti-wear multipurpose lubricants and are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Registered by NSF (Class H1) for use where there is potential for incidental contact with food.

16 gal, 5 gal

Shell Shell FM Hydraulic Oils Shell FM Hydraulic Oils are anti-wear multi-purpose lubricants, which are specifically designed for use in the food and beverage processing and packaging industry. They are based on a careful blend of base fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Registered by NSF (Class H1) for use where there is potential for incidental food contact, these products meet the former guidelines (1998) of the US Department of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use.

55 gal, 16 gal, 5 gal

Hydraulic OilsFo

od G

rade

Lub

rican


Jax Syncomp-P JAX Syncomp-P Series compressor oils are made from high quality, shear-stable 100% synthetic base oils. Syncomp-P Series compressor oils provide long compressor life through reduced component wear, corrosion protection, water resistance and lubricant breakdown resistance. Syncomp-P Series compressor oils reduce maintenance costs by extending drain intervals and lowering labor and used product disposal requirements.

100% SYNTHETIC POLY ALPHA OLEFIN TECHNOLOGY COMPRESSOR OILS

275 gal, 110 gal, 55 gal,16 gal, 5 gal, 4-1 gal cases

Jax Syncomp-D JAX Syncomp-D diester-based compressor oils are long-life, extended-drain premium compressor lubricants. Based on novel, proprietary technology, JAX Syncomp-D oils significantly improve operational temperatures, hydrolytic stability, oxidative resistance, oil service life, demulsibility and wear protection.

RECOMMENDED Seals – Viton®, High Nitrile Buna N (>36%), Teflon®, Paints – Epoxy, Oil-Resistant Alkyd, Two-Part Urethane, Plastics – Nylon, Delrin®, Celcon®, PBT NOT RECOMMENDED Seals – Neoprene, Styrene-Butadiene Rubber (SBR), Low Nitrile Buna-N, Butyl Rubber (Buna-S) Paints – Acrylic Paint, Lacquer Plastics – Polystyrene, PVC, ABS


Jax Syncomp-FG Series JAX Syncomp-FG Series compressor oils are made from high quality, shear-stable 100% synthetic USDA H1 authorized base oils. Syncomp-FG Series oils provide long compressor life through reduced component wear, corrosion protection, water resistance and lubricant breakdown resistance.

100% SYNTHETIC NSF H1-REGISTERED FOOD-GRADE COMPRESSOR OIL



JAX Flow-Guard Synthetic Series compressor oils are for use in industrial hydraulic, gear drive and other lubricated machinery performing a variety critical functions. Not only do they serve as a medium for energy transfer, but also as the lubricant, sealant, and heat transfer fluid for the components.

USDA/NSF H1 Authorized, Kosher and Parve Certified, Compliant with FDA 21 CFR 178.3570, Lubricants with Incidental Food Contact, Denison HF-0, HF-1 and HF-2, Racine Variable Volume Vane pumps, Vickers M-2950-S and I-286-S, Cincinnati Milacron P-68, P-69, and P-70, U.S. Steel 127 and 136


Jax Cryoguard Plus Series Cryoguard Plus is a premium, paraffinic-based compressor oil formulated specifically to provide superior lubrication and high-temperature erformance in today's demanding industrial ammonia refrigeration systems.

AMMONIA COMPRESSOR FLUID FRICK #3 OIL REPLACEMENT, FES #1 OIL REPLACEMENT


Jax Compressor Flushing Fluid 46

JAX Compressor Flushing Fluid 46 is designed to alleviate the problems caused by varnish and carbon deposits. JAX Compressor Flushing Fluid 46 is a fully formulated compressor lubricant containing synthetic base fluids and a highly dispersant additive system specifically designed to remove varnish, sludge and carbon deposits while providing exceptional dispersancy for transportation to the filtration system for removal.

Flash Point, °F (°C), ASTM D 92 442 (228) Fire Point, °F (°C), ASTM D 92 504 (262) Specific Gravity, ASTM D 1298 0.8866


Shell Cassida Fluid CR 46 Cryoguard Plus is a premium, paraffinic-basedcompressor oil formulated specifically to providesuperior lubrication and high-temperature erformance in today’s demanding industrial ammonia refrigeration systems.

AMMONIA COMPRESSOR FLUIDFRICK #3 OIL REPLACEMENT, FES #1 OIL REPLACEMENT


Compressor Oils

Food

Gra

de L

ubric

ants

Chain and Conveyor Lubes


Jax Chain Drive Pin & Bushing Lube

JAX Chain Drive Pin & Bushing Lube is a premium product compounded for severe industrial applications, including high loads and ambient conditions that can cause premature wear and failure to heavy-duty industrial chains.

E.P. CHAIN & CONVEYOR LUBRICANT SUPERB ANTIWEAR PERFORMANCE, NON-DRIP TAC

2000 lb tote, 400 lb drum, 120 lb keg, 35 lb pail, 4-1 Gal Cases

Jax Magna-Plate 200 Series

JAX Magna-Plate 200 is a premium product compounded for severe industrial applications where high loads and ambient conditions cause premature wear and failure to heavy-duty industrial chains.

E.P. MOLY SULFIDE CHAIN LUBRICANT WITH SUPERB ANTIWEAR PERFORMANCE. USDA-H2 AUTHORIZED

2000 lb Tote, 800 lb Tote, 400 lb Drum, 120 lb Keg 35 lb Pail, 50 Cartridge Case, 4 - 1 Gal Cases

Jax Magna-Plate 200NM Series

JAX Magna-Plate 200 NM is a premium product compounded for severe industrial applications where high loads and ambient conditions cause premature wear and failure to heavy-duty industrial chains.

E.P. CHAIN LUBRICANT WITH SUPERB ANTIWEAR PERFORMANCE & NON-DRIP TAC ADDITIVE


Jax Super Cling Chain Lube w/PTFE

JAX Super-Cling Chain Lube with PTFE is the tackiest, most viscous, specially formulated chain lube blended by JAX. The additive package includes E.P. additives, antiwear agents, rust and oxidation inhibitors, and tackifiers.

EXTREMELY HIGH VISCOSITY ANTIWEAR CHAIN OIL WITH TACKIFIER AND PTFE ADDITIVES, NSF H2-REGISTERED


Jax Magna-Kote MLD JAX Magna-Kote MLD is a bonded Moly Sulfide-based lubricant in a rapid evaporation rate carrier. Its primary applications are for chain and conveyor lubrication where the use of an oil-based lubricant is not desired, yet antiwear and extreme pressure protection are needed.

DRY-FILM BONDED MOLY SULFIDE LUBRICANT

275 Gal Tote, 110 Gal Tote, 55 Gal Drums,16 Gal Kegs, 5 Gal Pails, 4-1 Gal Cases

Jax Magna-Kote S3D JAX Magna-Kote S3D is a thin-film, antiwear lubricant formulated to perform under the most demanding conveyor applications.

THIN-FILM ANTIWEAR LUBRICANT


Jax Magna-Kote 412 JAX Magna-Kote 412 is formulated for chain and conveyor lubrication where the use of an oil-based lubricant is not desired, yet antiwear and extreme pressure protection is needed.

DRY-FILM BONDED MOLY SULFIDE LUBRICANT, NSF H2-REGISTERED


Jax Magna-Kote 412 Plus JAX Magna-Kote 412 Plus is formulated for chain and conveyor lubrication where the use of an oil-based lubricant is not desired, yet antiwear and extreme-pressure protection is needed.

DRY-FILM BONDED MOLY SULFIDE LUBRICANT


Jax Magna-Kote 990 JAX Magna-Kote 990 is a unique synthetic fluid-film lubricant designed to lubricate bearings, chains, slides and gears in industrial applications where air temperatures often exceed 500°F (260°C).

HIGH-TEMP, ASHLESS, SYNTHETIC CONVEYOR LUBES NSF H2-REGISTERED


Jax Pyro-Kote Series Oils JAX Pyro-Kote® Series Oils provide high operational temperature ranges and unsurpassed thermal and oxidative stability performance.

HIGH-FLASH, HIGH- TEMPERATURE, ANTIWEAR, SYNTHETIC POLYOL ESTER CONVEYOR CHAIN LUBRICANTS


Food

Gra

de L

ubric

ants


Jax Pyro-Kote Series WPV JAX Pyro-Kote WPV Series are specially formulated 100% synthetic lubricants designed to provide superior lubrication and protection to oven chains, slides and gears in industrial applications to temperatures of 500°F (260°C) with proper lubricating intervals. The high smoke, flash and fire points of JAX Pyro-Kote WPV help alleviate concerns of fire hazards associated with inferior fluids.

SPECIALIZED, EXTREME HIGH-TEMPERATURE 100% SYNTHETIC CHAIN & CONVEYOR LUBRICANT


Jax Forming Chain Oil A specially compounded lubricant designed for fiberglass forming conveyor chains operating in ambient to elevated temperature and extremely corrosive environments. It is a unique blend of select antiwear agents, rust inhibitors and synthetic polymers.

ANTIWEAR, CORROSION-RESISTANT CHAIN OIL


Jax Magna-Kote 1020 Series

JAX Magna-Kote 1020 Series are high-temperature synthetic-based fluids compounded for chain and conveyor lubrication where operating temperatures can cause severe and premature lubricant failure and conveyor chain wear.

WATER-SOLUBLE SYNTHETIC CONVEYOR LUBRICANTS ASHLESS ANTIWEAR PERFORMANCE


Jax Proofer Chain JAX Proofer Chain Oil is specially formulated for lubrication requirements in high humidity environments. This lubricant contains an effective combination of antiwear agents, enhanced rust inhibitors, and polymeric viscosity improvers to provide outstanding performance advantages over non-compounded white oils.

RUST-INHIBITED, NSF H1-REGISTERED FOOD-GRADE, ANTIWEAR LUBRICATING OIL

2000 lb Tote, 800 lb Tote, 400 lb Drum, 120 lb Keg 35 lb Pail, 4 - 1 Gal Cases

Jax Magna-Plate 76 JAX Magna-Plate 76 is a revolutionary new product for use in all food industry applications. Special food-grade E. P. additives and a costly synthetic polymer have been added to the highly-refined technical mineral oil to ensure optimum antiwear and adhesion characteristics.

NSF H1-REGISTERED, EXTREME-PRESSURE FOOD MACHINERY OIL WITH ENHANCED ANTIWEAR PROPERTIES AND MICRONOX®


Jax Magna-Plate 80 JAX Magna-Plate 80 food-grade lubricant is formulated to provide oil lubrication in the extreme cold or hot environments often found in food-processing plants. The base fluid is fully synthetic and FDA approved.

100% SYNTHETIC ANTIWEAR NSF H1-REGISTERED FOOD-GRADE OIL COMPUNDED FOR EXTREME-TEMPERATURE LUBRICATION


Jax Magna-Plate 86 JAX Magna-Plate 86 food-grade lubricant is compounded specifically to provide oil lubrication in extreme cold environments often found in food-processing plants. The base fluid is fully synthetic and FDA approved. It has an extremely low pour point of -76°F, yet has sufficient body to lubricate at all temperatures.

100% SYNTHETIC ANTIWEAR NSF H1-REGISTERED FOOD-GRADE OIL COMPOUNDED FOR EXTREME LOW-TEMP LUBRICATION


Jax Magna-Plate 88 JAX Magna-Plate 88 food-grade H1 lubricant is a heavier, tackified version of our JAX Magna-Plate 86. It is developed specifically to provide oil lubrication in extreme cold environments often found in food-processing plants. The base fluid is fully synthetic and FDA approved. It has an extremely low pour point of -33°F (-36°C), yet has sufficient body to lubricate at all temperatures.

SYNTHETIC ANTIWEAR NSF H1-REGISTERED FOOD-GRADE OIL COMPOUNDED FOR EXTREME LOW-TEMPERATURE LUBRICATION


Petro-Canada Purity FG Trolley Fluid; 46

Formulated to lubricate hook and trolley systems Food Industry Approved 55 gallon, 16 gallon, 5 gallon

Shell Shell Cassida Chain Oil HT

Shell Cassida Chain Oil HT is a fully synthetic, high performance silicone based oil which has been specially formulated for the food industry to lubricate drive and transport chains operated at elevated temperatures. It is based on synthetic components chosen for their ability to meet the stringent requirements of the food industry.

It is registered by the NSF (Class H1) for use where there is potential for incidental contact with food. This product meets the former requirements (1998) of the US Dept of Agriculture Food Safety and Inspection Service (USDA FSIS) for H1 use


Chain and Conveyor Lubes

Food

Gra

de L

ubric

ants

Speciality Lubricants


Jax Packer Oil 22 with Micronox

JAX Packer Oil 22 with Micronox® is manufactured with FDA-approved, oxidation-inhibited white mineral oils for all areas of lubrication and oil spray-down which may be exposed to incidental contact with a processed food, drug, cosmetic or beverage product. It meets NSF H1 food-grade lubricant requirements for incidental contact.

NSF H1; MEETS FDA 21 CFR 178.3570 KOSHER/PAREVE CERTIFIED; CONTAINS MICRONOX®


Jax Magna-Plate 72 JAX Magna-Plate 72 is a food grade air line oil compounded to provide the best air line lubrication performance in all areas requiring USDA H1 food-contact authorization. It contains antiwear and rust inhibitor additives to provide trouble-free operation of all air-operated equipment. The antiwear additives extend component life, while the rust inhibitors protect the internal parts and air motors of the lubricated equipment.

NSF H1-REGISTERED AIR LINE LUBE WITH ANTIRUST AND ANTIWEAR ADDITIVES

2000 lb Tote, 400 lb Drum, 120 lb Keg 35 lb Pail, 4 - 1 Gal Cases

Jax Magna-Plate 74 JAX Magna-Plate 74 is a food-grade air line oil compounded to provide the best air line lubrication performance in all areas requiring USDA H1 food-contact authorization. It contains a high percentage of emulsifiers and rust inhibitors to provide trouble-free operation of all air-operated equipment.

NSF H1-AUTHORIZED AIR LINE LUBE WITH ANTIRUST AND EMULSIFIER ADDITIVE


Jax Magna-Plate 78 Fluids Magna-Plate 78 fluids are USP white mineral oil-based lubricants utilizing a proprietary additive system and synthetic polymer technology to provide exceptional wear and corrosion protection in USDA/NSF H1 (Incidental Contact) food- and beverage-industry machinery applications.

ADVANCED ANTIWEAR/EXTREME-PRESSURE FOOD MACHINERY OIL WITH MICRONOX®


Jax Angel Guard Seamer Fluids

JAX Angel-Guard Seamer Fluids are provided in two formulations to handle the variety of products packaged with Angelus high-speed seamers. Both incorporate Micronox®, JAX anti-microbial technology for enhanced product protection against a wide variety of targets.

100% SYNTHETIC, NSF H1-REGISTERED FOOD GRADE ANTIWEAR, CAN SEAMER LUBRICATING OILS


Jax Magna-Kote SDO Series

JAX Magna-Kote SDO is a specially formulated emulsion which dissolves sugar, making it the choice for lubricating areas which can be affected by the presence of sugar. Formulated with high quality white mineral oil and additives, JAX Magna-Kote SDO provides enhanced antiwear performance and corrosion resistance.

USAD/NSF H1 FOOD-GRADE SUGAR-DISSOLVING LUBRICANT


Jax Premium A-P Pitter Oil JAX Premium A-P Pitter Oil is a state-of-the-art lubricating oil using the latest developments in food-grade technologies. The very high level of tackifier additive provides a protective film on all metal surfaces, even in extreme water washdown environments.

ATLAS-PACIFIC E.P. FOOD-GRADE PEACH PITTER OIL MEETS RQUIREMENTS OF FDA 21CFR 178.3570


Jax Premium A-P Peeler Oil JAX Premium A-P Peeler Oil is compounded specifically for use in the lifter oil reservoirs of Atlas-Pacific Apple Peelers and K-Pak Transmission/Gear Train Units. This oil meets USDA H2 requirements and provides excellent extreme-pressure and antiwear characteristics while maintaining good demulsibility properties.

MEETS USDA H2 REQUIREMENTS


Food

Gra

de L

ubric

ants


Jax Magna-Plate 2000 JAX Magna-Plate 2000 was developed after five years of extensive research and testing to meet the demanding requirements of FMC continuous rotary cookers, steam peelers and micro-valves. The extreme high-temperature capabilities of this remarkable lubricant have eliminated the need to stock two oils.

HIGH-TEMPERATURE STEAM COOKER AND STEAM PEELER LUBRICATING OIL, NSF H2-REGISTERED


Jax Magna-Plate 2100 JAX Magna-Plate 2100 was developed using extensive research and testing to improve upon lubricants currently used to meet the requirements of FMC continuous rotary cookers and steam peelers. The greatest improvements have been in the reduction of copper corrosion and wear experienced by aluminized bronze wear strips in the cooker and steam peeler valves.

NON-ZINC, HIGH-TEMPERATURE STEAM COOKER AND STEAM PEELER LUBRICATING OIL


Jax Magna-Plate 2000FG JAX Magna-Plate 2000FG was developed as a follow-up to our high-performance JAX Magna-Plate 2000 for the demanding requirements of FMC continuous rotary cookers and steam peelers. It is for use in plants and processing areas that require a food-grade USDAH1-authorized lubricant.

FOOD-GRADE, NSF H1-REGISTERED HIGH-TEMP CONTINUOUS COOKER LUBRICATING OIL


Jax Premium Rotary Pump Oil HT

JAX Premium Rotary Pump Oil HT was developed to solve the costly problems of rapid oil degradation, evaporation and carryover in industrial rotary vacuum pumps and booster blowers operating at elevated temperatures. Our formulation dramatically extends the life of the oil and the equipment while reducing problems with oil carryover.

HIGH TEMPERATURE VACUUM PUMP PERFORMANCE, NSF H2-REGISTERED


Shell Cassida Fluid VP 100 (Vacuum Pump Fluid)

Shell Cassida Fluid VP 100 is a high performance fluid specially developed for use in vacuum pumps used in the food and beverage processing and packaging industry. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

FOOD-GRADE, NSF H1-REGISTERED FOR VACUUM PUMPS WITH MEDIUM VACUUM

55 Gal Drums,16 Gal Kegs, 5 Gal Pails, 4-1 Gal Cases

Speciality Lubricants

White Oils


Jax White Mineral Oils JAX WHITE MINERAL OILS ISO 22, ISO 46, ISO 68 & ISO 100 are FDA NF and technical grade fluids. They are NSF-registered, oxidation-inhibited mineral oils for all areas of lubrication and oil spray-down which may be exposed to incidental contact to a food, drug, cosmetic or beverage product. They meet USDA H1 (incidental contact) and USDA 3H (release agents to prevent food from adhering during food processing).

NSF H1 AND 3H REGISTERED, KOSHER/PAREVE CERTIFIED


Petro-Canada Purity FG WO – White Mineral Oil; 15, 35, 90

Ultra pure, food grade blended with stabilizer for long shelf life

Food Industry Approved Bulk, totes, 55 gallon, 5 gallon

Food

Gra

de L

ubric

ants

Solvents and Cleaners


Jax Parts Wash Solvent JAX Parts Wash Solvent is a mineral spirits-based Stoddard Solvent for use in general degreasing and parts cleaning. It is specially formulated for use in recirculating cleaning units.

GENERAL-PURPOSE HYDROCARBON-BASED PARTS CLEANER


Jax Green-Clean Cleaner Degreaser

JAX Green-Clean Cleaner Degreaser is a fast-acting, non-chlorinated, concentrated cleaner/degreaser that is environmentally friendly and extremely effective. It is biodegradable and does not contain a petroleum base.

MEETS USDA A1 REQUIREMENTS AS A GENERAL CLEANER

Trigger Spray Bottles, Gallons, 5-Gallon Pails, and 55-Gallon Drums

Jax Odorless Mineral Spirits FG

JAX Odorless Mineral Spirits FG is a clear, colorless liquid that is odor-free. It is specially formulated for low odor and low aromatics.

FOOD-GRADE SOLVENT CLEAR, COLORLESS, ODOR-FREE


Aerosols


Jax AMERICA'S FINEST PENETRATING OIL

AMERICA'S FINEST PENETRATING OIL is a premium quality penetrating oil, compounded for professionals, mechanics and engineers. It is formulated with a proprietary blend of the finest available oils, the most effective wetting agents, and Moly to meet the toughest industrial standards. powerful high-performance solvents quickly cut through rust, dirt, grease and corrosion, penetrating the smallest cracks, while the molybdenum disulfide allows for easy separation and long-lasting lubrication.

NSF Category Code H2 Trigger Spray Bottles (16 Fluid Ounces, 12/Case), Gallons (4/Case), 5-Gallon Pails, and 55-Gallon Drums

Jax JAX BDF CLING-LUBE (AEROSOL)

JAX BDF CLING-LUBE (AEROSOL) was formulated and tested in conjunction with maintenance departments on the line in nationally recognized beef-processing plants requiring food-grade lubricants for overhead applications that would cling and not drip on the product.

NSF Category Code H1 11-Ounce Net Wt. Aerosol Cans (12/Case)

Jax BELT DRESSING BELT DRESSING is an outstanding belt dressing product with a proven track record of superior field performance. It contains no resins or asphalts, and will not collect dust, dirt or other airborne abrasive materials that can shorten the life of a belt. The exclusive formulation will keep belts clean and supple, with no residual build-up or accumulation.

USE ON LEATHER, CANVAS, AND RUBBER BELTS

11.5-Ounce Net Wt. Aerosol Cans (12/Case), Trigger Spray Bottles (16 Fluid Ounce, 12/Case), Gallons (4/Case), 5-Gallon Pails, and 55-Gallon Drums

Jax CHAIN & CABLE LUBE (AEROSOL)

A heavy-duty, multi-purpose lubricant formulated to be the best available for rigorous industrial applications. A combination of superior corrosion-resistant, antiwear, rust-preventive grease with effective penetrants provides the base. To this, the extreme lubricity and antifriction characteristics of Graphite and Molybdenum Disulfide (“Moly”) are added.

E.P. MOLY SULFIDE AND GRAPHITE CHAIN AND CABLE AEROSOL LUBRICANT WITH SUPERB ANTIWEAR ERFORMANCE & NON-DRIP TAC ADDITIVE. NSF H2-REGISTERED

11-Ounce (312 g) Net Weight Aerosol Cans (12/Case), Trigger Spray Bottles (16 Fluid Ounces, 12/Case), Gallons (4/Case), 35-Pound Pails, and 400-Pound Drums

Food

Gra

de L

ubric

ants


Jax JAX DRY-GLIDE SILICONE

DRY-GLIDE SILICONE (AEROSOL) is a premium quality aerosol silicone lubricant with a high percentage of high quality food-grade silicone fluid -- three times the percentage found in competitive sprays! JAX has developed a formula that is long-lasting and results-driven. JAX DRY-GLIDE SILICONE (AEROSOL) reduces friction, particularly between unlike surfaces or materials, and is especially effective for applications requiring dry and friction-free lubrication.

NSF H1-REGISTERED FOR USE IN FEDERALLY-INSPECTED MEAT AND POULTRY PLANTS

Trigger Spray Bottles (16 Fluid Ounces, 12/Case), Gallons (4/Case), 5-Gallon Pails, and 55-Gallon Drums

Jax GEAR-GUARD SYNTHETIC

A new development in open gear lubrication formulated to provide ultimate performance in severe applications. The base fluid is an ashless synthetic with a broad temperature range and superior water resistance to handle the toughest environments. The proprietary thickener provides excellent gear adhesion and unsurpassed water resistance. Chlorinated solvents have been eliminated from the formula and replaced with an environmentally-friendly mineral solvent.

NSF H2-REGISTERED SYNTHETIC OPEN GEAR COMPOUND

11-Ounce (312 g) Net Weight Aerosol Cans (12/Case),14-Ounce Caulk Tubes (25/Case) and 35-Pound Pails

Jax HALO-GUARD FG-2 HALO-GUARD FG-2 (AEROSOL) grease can satisfy the lubricant demands in nearly any food plant machinery application. This makes j HALO-GUARD FG-2 (AEROSOL) the ideal grease for general plant-wide grease lubrication. Superior water resistance, excellent compatibility with other greases, outstanding corrosion control, and excellent antiwear and E.P. performance help simplify grease inventory and provide the ultimate in food-grade grease performance.

NSF H1-REGISTERED, FOOD-GRADE, HIGH-TEMP CORROSION CONTROL GREASE WITH EXTREME-PRESSURE AND ANTIWEAR ADDITIVES

11-Ounce (312 g) Net Weight Aerosol Cans (12/Case), 14.5-Ounce Net Weight Grease Gun Tubes (50/Case) and 35-Pound Pails

Jax LIFT TRUCK AND SLIDING TANDEM LUBRICANT (AEROSOL)

LIFT TRUCK AND SLIDING TANDEM LUBRICANT (AEROSOL) is a combination of two premium, tacky greases with molybdenum disulfide. This formula is designed to produce a tenacious film of lubricant on any sliding metal surface. The grease provides the beneift of antiwear and extreme-pressure additives, while the molybdenum disulfide creates a burnishing film, providing extra insurance long after the grease may wear away.

MOLYBDENUM DISULFIDE ENHANCED AEROSOL LUBRICANT WITH SUPERB E.P. AND ANTIWEAR PERFORMANCE. NSF H2-REGISTERED

11-Ounce Net Wt. Aerosol Cans (12/Case)

Jax MAGNA-PLATE 86 MAGNA-PLATE 86 food-grade lubricant is compounded specifically to provide oil lubrication in extreme cold environments often found in food-processing plants. The base fluid is fully synthetic and FDA approved. It has an extremely low pour point of -76°F, yet has sufficient body to lubricate at all temperatures. The additive package includes an effective combination of E.P. and antiwear agents, and rust and oxidation inhibitors.

100% SYNTHETIC ANTIWEAR NSF H1-REGISTERED FOOD-GRADE OIL COMPOUNDED FOR EXTREME LOW-TEMPERATURE LUBRICATION

11-Ounce Net Weight Aerosol Cans (12/Case), Gallons (4/Case), 35-Pound Pails and 400-Pound Drums

Jax JAX MAGNA-PLATE 78

A revolutionary new product for use in all food-industry applications. Special food-grade E. P. additives and a costly synthetic polymer have been added to the highly-refined technical mineral oil to ensure optimum antiwear and adhesion characteristics. The cold-temperature viscosity increase enables the lubricant to go into a semisolid state after the propellants have dissipated.

NSF H1-REGISTERED AEROSOL FOOD MACHINERY OIL WITH ENHANCED ANTIWEAR PROPERTIES

11-Ounce Net Weight Aerosol Cans (12/Case), Gallons (4/Case), 35-Pound Pails and 400-Pound Drums

Aerosols

Food

Gra

de L

ubric

ants


Jax PROTECTO-LUBE PROTECTO-LUBE is a dry-film lubricant that gives positive protection against wear, rust and corrosion. The exclusive formulation includes molybdenum disulfide, which creates a friction-reducting film that resists heat, cold, moisture and salt.

DRY-FILM MOLY SPRAY NSF H2-REGISTERED

13-Ounce Net Weight Aerosol Cans (12/Case)

Jax JAX PürGel Klear An extremely clean, pure petrolatum product that meets FDA requirements for United States Pharmacopoeia. In addition, it meets FDA requirments for 21 CFR Part 172: Food Additive Permitted for Direct Addition to Food for Human Consumption and Part 178: Indirect Food Additives.

FOOD-GRADE, PURE WHITE, FDA-APPROVED, KOSHER PETROLATUM NSF 3H-REGISTERED FOR USE AS A RELEASE AGENT

8-Ounce Squeeze Tubes (12/cs); 13.5-Ounce Grease Gun Tubes (50/cs); 1-Pound Wide-Mouth Jars (12/cs); 35-Pound Pails; 120-Pound Kegs and 375-Pound Drums.

Jax PRECISION CONTACT CLEANER

PRECISION CONTACT CLEANER (AEROSOL) is a premium quality aerosol contact cleaner that evaporates quickly and leaves no residue. It loosens gummy deposits, caked greases and other contaminants from contacts, boards and breakers.

NONFLAMMABLE CONTACT CLEANER; NSF K2-REGISTERED

15-Ounce Net Wt. Aerosol Cans (12/Case)

Jax STAINLESS STEEL CLEANER

STAINLESS STEEL CLEANER is compounded with a unique formula that polishes, cleans and shines stainless steel, plexiglass, copper, and many other high-luster metals with a minimum amount of “elbow grease”. STAINLESS STEEL CLEANER does not leave a film or oily residue and helps prevent water spotting and staining. It makes stainless surfaces shine like new!

NSF A7-REGISTERED CLEANER

14-Ounce Net Wt. Aerosol Cans (12/Case), Trigger Spray Bottles (16 Fluid Ounces, 12/Case) and 5-Gallon Pails

Petro-Canada Purity FG MF Lubricant Packaged in 290 gram/400 ml aerosol can for chains, guides, slides, pivots, cables and linkages, gears, and hinges.

Food Industry Approved 290 gram aerosol can

Aerosols

Air Line Antifreeze


Jax Air line/Gas Line Anti-Freeze

JAX Air Line/Gas Line Anti-Freeze is a blend of isopropyl and methyl alcohols. It is intended for use as an air line or gas line anti-freeze to disperse moisture. It helps eliminate cold weather freeze-ups of fuel lines, air lines and air-activated components.

FOR FREEZE PROTECTION IN AIR LINES AND GASOLINE AND DIESEL FUELS


Food

Gra

de L

ubric

ants

Antigels

Manufacturer Product Name Product Comments Container Size

Powerservice Diesel Fuel Supplement® +Cetane Boost®

This is the product of choice for optimal winter operation. Diesel Fuel Supplement® +Cetane Boost® contains the most effective antigel additive package available in the diesel industry - no blending with No.1 diesel or kerosene is needed to achieve maximum winter protection.

55 gal, 2½ gal, 96 oz, 32 oz, 16 oz

Powerservice Arctic Express® Diesel Fuel Antigel

Diesel 9·1·1® is the product diesel-engine operators call on when they have a winter diesel fuel emergency.

55 gal, 2½ gal

Powerservice Diesel 9•1•1 Diesel 9·1·1® is the product diesel-engine operators call on when they have a winter diesel fuel emergency.

55 gal, 2½ gal, 96 oz, 32 oz, 16oz

Biodiesel Antigels


Powerservice Arctic Express® Biodiesel Antigel

Power Service Arctic Express® Biodiesel Antigel eliminates cold-weather operational problems associated with the use of diesel fuels containing up to 20% biodiesel (B20).

55 gal, 2½ gal

Cetane Boosters


PowerService Diesel Kleen® +Cetane Boost

Diesel Kleen® is loaded with cetane, detergency and lubricity additives to keep your diesel engine running at peak performance.

2½ gal, 96 oz, 32 oz, 16 oz

PowerService Diesel Fuel Supplement® +Cetane Boost

Diesel Fuel Supplement® +Cetane Boost® keeps fuel injectors clean and boosts cetane up to 4 numbers for faster cold starts and a smoother running engine.

55 gal, 2½ gal, 96 oz, 32oz, 16oz

PowerService Agri Power® +Cetane Boost

It contains powerful fuel injector-cleaning detergents, a cetane boost up to 4 numbers and Slickdiesel® for maximum fuel lubrication.

55 gal, 2½ gal

De-Icers


PowerService Diesel 9•1•1 Diesel 9·1·1® is the product diesel-engine operators call on when they have a winter diesel fuel emergency.

55 gal, 2½ gal, 96 oz, 32 oz, 16 oz

Emission Reducers



Diesel Kleen® +Cetane Boost® is the premier “performance” product on the market. Diesel Kleen® is loaded with cetane, detergency and lubricity additives to keep your diesel engine running at peak performance

55 gal, 2½ gal, 96 oz, 32 oz, 16 oz

PowerService Diesel Fuel Supplement® +Cetane Boost®

This is the product of choice for optimal winter operation. Diesel Fuel Supplement® +Cetane Boost® contains the most effective antigel additive package available in the diesel industry - no blending with No.1 diesel or kerosene is needed to achieve maximum winter protection.

55 gal, 2½ gal, 96 oz, 32 oz, 16 oz

PowerService Agri Power® +Cetane Boost®

America’s agri-diesel industry demands the highest quality of diesel fuel to protect its diesel engines and maximize engine performance

55 gal, 2½ gal

Die

sel A

dditi

ves

Fuel and Tank Cleaners


PowerService Clear-Diesel® Fuel & Tank Cleaner

Power Service Clear-Diesel® Fuel & Tank Cleaner is an advanced fuel tank cleaning technology that has been proven effective in hundreds of fleet, marine, construction and agricultural applications.

55 gal, 2½ gal, 96 oz, 32 oz

Injector Cleaners



Diesel Kleen® is loaded with cetane, detergency and lubricity additives to keep your diesel engine running at peak performance.

2½ gal, 96 oz, 32 oz, 16 oz

PowerService Diesel Fuel Supplement® +Cetane Boost®

Diesel Fuel Supplement® +Cetane Boost® keeps fuel injectors clean and boosts cetane up to 4 numbers for faster cold starts and a smoother running engine.

2½ gal, 96 oz, 32 oz, 16 oz

PowerService Agri Power® +Cetane Boost

It contains powerful fuel injector-cleaning detergents, a cetane boost up to 4 numbers and Slickdiesel® for maximum fuel lubrication.

55 gal, 2½ gal

Microbial Cleaners


PowerService Bio Kleen® Diesel Fuel Biocide

Effective as a “quick-kill” biocide and for long-term diesel fuel maintenance. 96 oz, 16 oz

Water Removers


PowerService Diesel 9•1•1 Removes water from fuel system — extends life of fuel-filters, fuel-injection pumps and fuel injectors.

55 gal, 2½ gal, 96 oz, 32 oz, 16 oz

Die

sel A

dditi

ves

Antifreeze


Recochem Inc. Turbo PowerTM All Season Engine Antifreeze/Coolant (Green)

Low Silicate, Automotive plus Compatible with SCA's for Heavy Duty Diesel applications

Concentrate, 50-50 mix, bulk, 265 gal, 55 gal, 4 x 1 gal case

Recochem Inc. OEMTM Global, All Makes/Models, Foreign & Domestic Passenger Vehicles and Light Duty Trucks (Yellow)

Guarantee of extended life performance up to 5 Years or 150K Miles, when added as initial fill or when added to a cooling system after complete drain, flush, and fill.


Recochem Inc. Turbo PowerTM Extended Life Antifreeze/Coolant Meets GM6277M (Orange)

Extended life performance of up to 5 years or 150K Miles, Amine, Borate, Nitrate, Nitrite, Phosphate, Silicate Free formulation.


Recochem Inc. Turbo PowerTM Heavy Duty Diesel (Fuscia/Purple)

Low Silicate, Heavy Duty Diesel applications, No SCA required on initial fill


Recochem Inc. Turbo PowerTM Heavy Duty Diesel Extended Life Antifreeze/Coolant (Red)

Recochem Inc. Proprietory Technology. No SCA required on initial fill. Low Silicate, Phosphate and Amine Free. Aluminum compatible. Extended Service Life up to 6 years, 12K Hours, or 600K Miles.

50-50 mix, bulk, 265 gal, 55 gal, 4 x 1 gal case

Recochem Inc. RV Plumbing Antifreeze (Red)

Minus 50 Degree Burst Protection, Ready-to-Use 55 gal, 4 x 1 gal case

Recochem Inc. RecoTherm IGTM Low Temperature Industrial Heat Transfer Fluid (Clear)

Ethylene Glycol based formulation used in primary and secondary cooling or heating applications, freeze and burst protection of pipes and for a variety of deicing, defrosting, and dehumidifying applications


Shell Rotella ELC Extended Life Coolant/Anti-Freeze

A "fill for life" ethylene glycol based coolant for heavy-duty diesel, gasoline, and natural gas powered engines.

1 gallon, 5 gallon pails, 55 gallon drums

Shell ShellZone Anti-Freeze High quality single phase ethylene glycol based antifreeze. All-purpose coolant designed for use in both automotive and heavy duty diesel engines.


Shell Shell DEX-COOL Extended Life Antifreeze/Coolant

Single-phase ethylene glycol based, extended life, universal automotive engine coolant based on a unique extended life carboxylate inhibitor system.


Anc

illar

iesSolvent, Kerosene, Mineral Spirits, Methanol


Recochem Inc. Odorless Mineral Spirits Rule 66 Type, Low Aromatic, Cleaning Solvent 4 x 1 gal, 5 gal, 55 gal

Recochem Inc. Solvent 3139 Stoddard Type Aromatic Cleaning Solvent 4 x 1 gal, 5 gal, 55 gal

Recochem Inc. Kerosene K1, Clear 4 x 1 gal, 2 x 2.5 gal, 5 gal, 55 gal

Recochem Inc. Methanol 99.9% Pure 4 x 1 gal, 5 gal, 55 gal

Heat Transfer Fluids


Recochem Inc. RecoFreeze PGTM Low Temperature Industrial Heat Transfer Fluid (Yellow)

Propylene Glycol based version of RecoTherm IGTM. This formulation is most commonly used in applications where low acute oral toxicity is a requirement or when a potential exists for contact with food or potable water.

Available in concentrate and 50-50 or 60/40 premix - bulk, 265 gal tote, 55 gal drum

Windshield Wash


Recochem Inc. Windshield Washer Fluid (Blue)

Minus 25 Degree Protection 4 x 1 gal, 55 gal

Gas Cans


Blitz 1 Plus Gas Can 1 Gallon Gas Can 1 gal

Blitz 2 Plus Gas Can 2 Gallon Gas Can 2 gal

Squeegees


Mallory 8" Head 8" Head squeegee 12 per case




Oil and Gas Treatment


STP Oil Treatment High-viscosity formula is specially formulated to help fight metal-to-metal friction by providing a thicker cushion between moving engine parts.

15 oz x 12 case

STP Gas Treatment Improves quality of gas by adding powerful cleaning agents to help fight accumulation of harmful carbon, gum and varnish deposits in the fuel system that can reduce performance.

8 oz x 12 case

Anc

illar

ies


Master Power Steering Fluid Power Steering Fluid 12 oz x 24 caseMaster Power Steering Fluid Power Steering Fluid 32 oz x 12 case

Master Power Steering Fluid Starting Fluid 16 oz x 12 case

Quaker State Quaker State 4X4 DOT 3 Brake Fluid 550

With a minimum dry boiling point of over 550 degrees F, it provides an extra margin of safety in severe service.

12oz x 12 case

Quaker State Quaker State DOT 3 Brake Fluid

Premium brake fluid for use in most passenger cars, trucks, tractors, buses and heavy duty vehicles. Minimum dry boiling point exceeds 450 degrees F

12oz x 12 case

Quaker State Quaker State DOT 4 Brake Fluid 470

Premium brake fluid for use in most passenger cars, trucks, tractors, buses and heavy duty vehicles. Minimum dry boiling point exceeds 470 degrees F

12oz x 12 case

Quaker State Quaker State Power Steering Fluid

Recommended for the service fill requirements of most major auto manufacturers worldwide.

12oz x 12 case

Power Steering Fluid and Starting Fluid

WD-40


WD-40 WD-40 Protects metal from rust and corrosion, penetrates stuck parts, displaces moisture, and lubricates just about anything.

8 oz x 12 case

Brake Fluid


Fade Free Heavy Duty Brake Fluid Heavy Duty, DOT 3 Brake Fluid, Plastic Bottle 12 oz x 24 case

Anc

illar

ies

Air Brake Conditioner and Antifreeze


Unifide Airbrake Conditioner Airbrake Conditioner and Antifreeze 32 oz x 12 case

Master Windshield De-Icer Windshield De-Icer 16 oz x 12 case

Aerosols


Master Carburetor & Choke Cleaner Carburetor & Choke Cleaner 16 oz x 12 caseMaster Chain Lube Chain Lube 16 oz x 12 case

Master Glass Cleaner Glass Cleaner 20 oz x 12 case

Master Tire Sealer Tire Sealer with Hose 16 oz x 12 case

Wiper Blades


Rain-X Rain-X Weatherbeater 12’, 13”, 14”, 15’, 16”, 17”, 18”, 19”, 20”, 21”, 22”, 24”, 26”, 28” 10/1 case

Rain-X Rain-X Latitude 16”, 17”, 18”, 19”, 20”, 21”, 22”, 24”, 26”, 28” 6/1 case

Rain-X Rain-X Latitude - 2 20”, 21”, 22”, 24” 6/1 case

Rain-X Rain-X Heavy Duty 13”, 14”, 15’, 16”, 18”, 19”, 20”, 21”, 22”, 24” 6/1 case

Rain-X Rain-X Winter Blade 16”, 18”, 20”, 22”, 24”, 26” 6/1 case

Flushing Products


Gumout Gumout All-in-One Fuel System Treatment

Gumout All-In-One is designed to provide both improved engine performance through complete fuel system cleaning while provideing lubrication protection to help reduce wear.

20 oz

Gumout Gumout Fuel Injector-Carburetor Cleaner

GUMOUT® FUEL INJECTOR-CARBURETOR CLEANER is a fuel system additive which incorporates effective detergent-type cleaners to help remove deposits.

20 oz

Gumout Gumout Professional Engine Flush

GUMOUT® PROFESSIONAL ENGINE FLUSH helps clean and prepare the engine for new oil and provides a more thorough oil change by removing more harmful deposits than a normal oil change.

20 oz

Gumout Gumout Professional Power Steering Flush

GUMOUT® PROFESSIONAL POWER STEERING FLUSH is intended for professional use only and should be used as follows. Use appropriate safety protection while performing this service, including eye and hand protection.

20 oz

Gumout Gumout Professional Radiator Flush

GUMOUT® PROFESSIONAL RADIATOR FLUSH helps extend cooling system life by removing rust, cooling system sludge, residue, scale and other cooling system deposits. GUMOUT® PROFESSIONAL RADIATOR FLUSH is compatible with all antifreeze/coolant.

20 oz

Gumout Gumout Professional Power Steering Flush

GUMOUT® PROFESSIONAL POWER STEERING FLUSH is intended for professional use only and should be used as follows. Use appropriate safety protection while performing this service, including eye and hand protection.

20 oz

Gumout Gumout Professional Transmission Flush

GUMOUT® PROFESSIONAL TRANSMISSION FLUSH helps extend transmission life by removing harmful deposits and freeing sticky valves. GUMOUT® PROFESSIONAL TRANSMISSION FLUSH is mineral oil based with a dispersant/detergent additive package.

20 oz

Anc

illar

ies

Grandview501 E. Wine Country Rd.P.O. Box 98Grandview, WA 98930

800.572.9634

Pasco 151 N. Commercial Ave. Pasco, WA 99301

509.547.6122

Seattle | General Transport 270 S. Hanford, Suite 210 Seattle, WA 98134

206.622.5650

Toppenish63443 Hwy 97 Toppenish, WA 98948

509.865.3415

Walla Walla948 May Street Walla Walla, WA 99362

509.525.8180

Yakima311 West I Street Yakima, WA 98902

509.453.3191

LUBRICANTS • ADDITIVES • ANCILLARIES

BRAND SELECTION • LUBRICANTS

Product Guide 5-09 Equivalencias

Documents

Transcript of Product Guide 5-09 Equivalencias