Product End-of-Life Disassembly Instructionsh22235. · 2014. 10. 21. · Product End-of-Life...

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Marketing Name / Model [List multiple models if applicable.] HP Stream 7 Tablet Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

1

Batteries All types including standard alkaline and lithium coin or button style batteries

1

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

1

Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

0

External electrical cables and cords 1 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

0

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

EL-MF877-00 Template Revision B

PSG instructions for this template are available at EL-MF877-01

http://standards.corp.hp.com/elclass/AMF87701.htm

Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if

applicable)

Screwdriver #1 Electric screwdriver 0#

Description #2 Soldering iron

Description #3 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8. 9.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Template Revision B

PSG instructions for this template are available at EL-MF877-01

http://standards.corp.hp.com/elclass/AMF87701.htm

制表：白明明IES审核：

MANUFACTURING PROCESS INSTRUCTIONSMECHANICAL ASSEMBLY

MODEL：Ganges

0.10

Station VersionStation VersionStation VersionStation VersionStation VersionStation Version

1 0.10 9 0.10

2 0.10 10 0.10

3 0.10 11 0.10

4 0.10 12 0.10

5 0.10 13 0.10

6 0.10 14 0.10

7 0.10 15 0.10

8 0.10

Station Ver.

ALL 0.1*2014/9/9 首份SOP制作储佳慶

Sub-assembly name: Ganges DIS FA ASS'Y SOP

Document No.: Ganges DIS FA ASS'Y SOP

Written by: 储佳慶 Revision:

Content Design

1 of 17

A.Current station version list:

B.Version Modify list:

Date

Page:Date: 2014/9/9

作业指导书Document No.：Ganges FA DIS ASSY SOP 站别:作业名称 Ver: 编辑日期:

制表：白明明IES

治具清单(治具規格) 数量治具清单(治具規格) 数量

发行部门：审核：刘迎春IES PE1-IE

注意事项︰手套每天作业前须检查,务必保证手套洁净,如有不洁需及时更换.

步骤：

拆后盖1(1/1)

1.拆后盖回收

※可从图示拐角凹槽处拆起

※注意卡勾不可拆断

0.10 2014/09/09

从此处拆起






步骤：

1.拆螺丝(6052B0303801)*8(图一)。

※螺丝扭力1.5±0.2kgf*cm

拆螺丝2(1/1)

图一

电动起子0# 1

0.10 2014/09/09






步骤：

1.拆middle frame回收※卡勾不可拆断

拆Middle frame3(1/1)

0.10 2014/09/09






步骤：

拆电池4(1/1)

0.10 2014/09/09

图一

1.将电池CNTR拔起(图一)2.抽掉电池易拉胶(图二), 回收电池

※水平抽

vendor Number

TCL 6027B0129801Mbell 6027B0130001

图二






步骤：

拆摄像头5(1/1)

1.将前camera和后cameraCNTR拆开

2.将前camera和后camera拆下回收

0.10 2014/09/09

后camera

前camera

理线棒 1






步骤：

拆Side key/B6(1/1)

0.10 2014/09/09

1.将CNTR翻盖掀起

2.将FPC从CNTR中拔出

3.将side key/B拆下回收

理线棒 1






步骤：

拆key7(1/1)

Power key Volume key

0.10 2014/09/09

镊子 1

1.拆power key和volume key回收






步骤：

拆Antenna8(1/1)

0.10 2014/09/09

1.撕醋酸胶带

2.将antenna拆下回收






步骤：

拆FPC

1.掀起TP CNTR翻盖,将FPC拔出(图一）

2.将panel端CNTR和MB端CNTR翻盖掀起(图二)3.拆下panel FPC回收

9(1/1)

图一

Panel Panel FPC

6024B0151001(星源) 6035B01244016024B0151201(艾星) 6035B0125401

0.10 2014/09/09

2处CNTR

图二






步骤：

拆 Speaker10(1/1)

1. 用烙铁将speaker拆下回收

※焊接温度: 395±10℃(图三)

※不可有短路,溅锡,撞件等不良

图一

图二

电烙铁 1

0.10 2014/09/09






步骤：

拆SCREW

1.拆螺丝(6052B0303701)*2(图一)。


电动起子0# 1

图一

11(1/1)0.10 2014/09/09






步骤：

拆MB

1.将MB拆下回收

图一

12(1/1)0.10 2014/09/09

图二






步骤：

拆MIC RUBBER

1.拆拆rubber

13(1/1)

图一

※Rubber有方向性,裙边朝向Camera破孔处

0.10 2014/09/09

镊子 1






步骤：

拆Gasket

1.拆gasket

图一

14(1/1)0.10 2014/09/09

图二

图三

镊子 1






步骤：

目检外观回收

1.目检外观

※检查零件有无破损,损毁…..等

※检查FPC有无断裂

※撕布纹胶带时须轻撕,以免拉断FPC

※Bezel卡勾须确实勾合BRKT(图三白框)

2.用美纹胶将FPC粘于bracket上

3.放入回收

15(1/2)0.10 2014/09/09






步骤：

取Panel module目检15(2/2)

0.10 2014/09/09

Speaker mesh

Camera sponge检查如下泡棉, mesh, gasket没有漏贴

贴附偏上NG

贴附靠齐此rib

制表：白明明IES审核：

MANUFACTURING PROCESS INSTRUCTIONSMECHANICAL ASSEMBLY

Model :Ganges

0.10

Station VersionStation VersionStation VersionStation VersionStation VersionStation Version

1 0.10

2 0.10

3 0.10

4 0.10

5 0.10

6 0.10

7 0.10

8 0.10

Station Ver.

ALL 0.1*

Content Design

2014/9/9 首份SOP制作

Date: 2014/9/9 Page: 1 of 9

储佳慶

A.Current station version list:

B.Version Modify list:

Date

Written by: 储佳慶 Revision:

Sub-assembly name: Ganges Touch LCM DIS ASS'Y SOP

Document No.: Ganges Touch LCM DIS ASS'Y SOP

注意事项︰手套每天作业前须检查，务必保证手套洁净，如有不洁需及时更换。

作业指导书

Document No. : SOP Ganges Touch LCM ASS’Y 站别 :作业名称 : Ver. : 编辑日期:

治具清单(治具规格) 数量治具清单(治具规格) 数量

步骤：

白明明IES 发行部门：PE-IE制表：审核：刘迎春IES

1.取半成品,撕掉FPC处美纹胶

1(1/1)拿取半成品 0.10 2014/09/09


作业指导书



步骤：


1.撕掉mesh和泡棉回收

2(1/1)回收泡棉和mesh

Speaker mesh

Camera sponge

图一

图二

图三

0.10 2014/09/09

贴附偏上NG

贴附靠齐此rib


作业指导书



步骤：


1.拆螺丝*4


.

电动起子#0 1

拆螺丝

3(1/1)

1

2

3

4

0.10 2014/09/09


作业指导书



步骤：


1.撕mylar,不可破损(图一)

2.揭掉导电布和导电泡棉(图二)回收

.

回收 Gasket, Mylar

4(1/1)

图一

0.10 2014/09/09

图二

黑色mylar

导电布导电泡棉


作业指导书



步骤：


1.拆bracket回收

※可从拐角拆起(圆圈)

※卡勾不可拆断

.

拆bracket

5(1/1)0.10 2014/09/09


作业指导书



步骤：


拆panel(无尘室)

1.拆下panel,贴保护膜回收

※不可刮伤

0.10 2014/09/096(1/1)


作业指导书



步骤：


撕泡棉(无尘室)7(1/1)

1.撕4颗泡棉回收

2.TP上加贴保护膜防灰尘

Main Part Number

泡棉 1 6054B1478201

泡棉2, 3 6054B1478401

泡棉 4(2角有凹槽) 6054B1477901

1

2

34

0.10 2014/09/09


作业指导书



步骤：


材料回收(无尘室外)

1.目检无外观不良后回收

8(1/1)

Main Part NumberPanel(星源) 6024B0151001

Panel(艾星) 6024B0151201

图一

图二

0.10 2014/09/09

Product End-of-Life Disassembly Instructionsh22235. · 2014. 10. 21. · Product End-of-Life...

Documents

Transcript of Product End-of-Life Disassembly Instructionsh22235. · 2014. 10. 21. · Product End-of-Life...