Product End-of-Life Disassembly Instructionsh22235.€¦ · Cross electrical screwdriver 3.0...

EL-MF877-00 Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions Product Category: Personal Computers

Marketing Name / Model [List multiple models if applicable.] HP Elite Slice G1

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

1

Batteries All types including standard alkaline and lithium coin or button style batteries

1

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

0

Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

0

External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

0

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

Components and waste containing asbestos 0

http://standards.corp.hp.com/elclass/AMF87701.htm

EL-MF877-00 Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

T15, T8 Electric Screwdriver Support fixture M/B B side support fixture Suction pen Cross electrical screwdriver 3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw. 4. Disconnect RTC battery cable and remove battery from M/B. 5. Dispose of all removed components according to regulation requirements. 6. 7. 8. 9.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

http://standards.corp.hp.com/elclass/AMF87701.htm

MANUFACTURING PROCESS INSTRUCTIONSMECHANICAL ASSEMBLY

MODEL : Slice

auditor： Stanley Chen

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor： Stanley Chen NPSU-PPE

1. Loosen screw *4 of bottom case (Fig.1)

Torque：3.0 ± 0.2 Kgf．cm

2. Take off bottom case (6070B1043901) ,and put it in the box

Disassembly bottom case

1(1/1)0.10 2016/6/29

Fig. 1

3

1

2

4

Cross electrical screw driver #1 1

Fig. 2






Step：


1. Disassembly Speaker connector form MB

2. Disassembly Speaker module(6039B0082201) and put it in the box

Do not press the Speaker eardrum when disassembly the speaker .

Disassembly Speaker

2(1/1)0.10 2016/6/29

Speaker Connector

eardrum

Put the right side hook , and release the speaker .






Step：


1. Disassembly HDD connector from MB(Fig. 2)

2. Loosen HDD bracket screw *4 (Fig.1)


Disassembly HDD

3(1/1)0.10 2016/6/29


HDD connector

1

23

4

Fig.1

Fig.2 Fig.3






Step：


1. Take HDD and remove the HDD cable from the HDD . Put it in the box . (fig.1)

2. Loosen HDD bracket screw (6054B1636401)*4 from the both side of the HDD . (Fig.2)


3. Put the HDD bracket and HDD in the different box .

Disassembly HDD

4(1/1)0.10 2016/6/29

1

3

4

2

Fig. 2

Fig.1


HDD support fixture 1

Fig.3






Step：


1. Loosen screw *4 of the middle frame (Fig. 1)


2. Turn over the machine , and disassembly top case . (Fig.2)

3. Only for Touch model Disassembly cable (6017B0773101)

connector on touch/B , and disassembly the other side connector on M/B . Put the cable in the box . (Fig.3)

4. Only for charger model Disassembly cable connector on touch/B , and disassembly the other side connector on M/B . Put the cable in the box . (Fig.3)

Disassembly top cover

5(1/1)0.10 2016/6/29


4

13

2

Fig.2

Fig. 1

Touch ,charger CNTR

Fig. 3

Fig.4






Step：


14

32

Thermal cover

1. Disassembly DDR from the M/B , and put it in the box .(Fig.1)

The numbers of DDR disassembly is base on it on the M/B .

2. Loosen thermal cover screw(6052B0156301) *4 (Fig.2)


3 . Put top cover & thermal cover (6070B1042401) in the different box.

Disassembly DDR & thermal cover

6(1/1)0.10 2016/6/29


Fig.2

Top cover

Fig.3

Fig.1

DDR

Fig.4






Step：


1. Disassembly Fan cable connector on M/B (Fig. 2)

2. Loosen thermal screw *4 (Fig.1)

Torque : 2.5 ± 0.2 Kgf．cm

Disassembly thermal module

7(1/1)0.10 2016/6/29

Fig.1

Fig.2

1

3

4

2

FAN CNTR

T15 electrical screw driver 1

Fig.3






Step：


1. Loosen FAN screw (6052B0262901)* 4 (Fig.1)


2. Put thermal (6043B0209401/6043B0209411) & FAN module(6033B0048801/6033B0048802) in the different box .

Disassembly FAN

8(1/1)0.10 2016/6/29

Fig.1

1

23

4


Thermal assembly fixture 1

Fig.2






Step：


1. Disassembly antenna plug *2 from WLAN card(Fig.1)2. Disassembly thermal sensor connector from M/B . (Fig.2) . Pick up sensor module from rubber (Fig.3) ,and put it in the box .3. Disassembly finger print FFC connector from M/B (Fig.4).

Disassembly antenna plug ,thermal sensor

9(1/1)0.10 2016/6/29

图一

Thermal sensor connector图二

图三

Support Rubber

F/G CNTR

图四






Step：


1. Disassembly antenna cover *2 on the middle frame , and put them in the box . (Fig.1 )

2. Loosen WLAN card screw (6052B0118301) *1 . (Fig.2)

Torque ：2.0 ± 0.2 Kgf．cm3. Disassembly WLAN card , and put it in the box .

Only for M2 SSD model .1 . Loosen SSD screw (6052B0118301) *1 . (Fig.2)

Torque：2.0 ± 0.2 Kgf．cm2. Disassembly SSD card from M/B ,and put it in the box .

Disassembly WLAN card, SSD, antenna

10(1/1)0.10 2016/6/29

Fig.2

WLAN M2 SSD

Cross electrical screw driver#1 1

Aux antenna

Fig.1

Main antenna

Fig.3






Step：


ILM

11(1/1)

Disassembly CPU

M/B B side support fixture 1Suction pen 1

图一Press IML handle

Suction pen图二

图三

CPU box

IML box

1. Press the ILM handle, and take off the CPU cover .

2. Use the suction pen to pick up CPU on the CPU socket, and collect it in the CPU box .

3. Lock the ILM handle and assembly CPU IML cover

Cannot touch CPU pin with hand .

0.10 2016/6/29






Step：


12(1/1)

Disassembly MB

图一

Fig.2

1. Loosen MB screw(6052B0118301)*1

2. Disassembly MB from middle frame , and put it in the box .

Push the middle frame of audio side , and let audio jack been outside of the middle frame . (Fig.3) Take the M/B audio side out of the middle frame , and disassembly it .(Fig.3)

0.10 2016/6/29

Screw

Push middle frame with finger , and let audio jack been outside of the middle frame.

Fig.3

Cross electrical screwdriver#1 1

Fig.1

Fig.4






Step：


13(1/1)

Disassembly antenna

1. Disassembly main antenna cable (shorter one ,036B0177401 WNC /6036B0176101

INPAQ)(Fig.1)2. Disassembly AUX antenna cable (longer one6036B0177501 WNC /6036B0176001 INPAQ)

(Fig.2)3. Put these antenna in different box .

0.10 2016/6/29

Aux antenna

Main antenna

Fig.1

Fig.2






Step：


14(1/1)

Disassembly Finger module

With Finger model 1. Loosen screw (6052B0118301)*1 (Fig.1)


2. Disassembly finger iron parts (6053B1309101), and put it in the box .(Fig.2)

3.Disassembly Finger module and FFC (6035B0158301), and put Finger &FFC in the different box (Fig.3)

Without finger model1. Loosen screw(6052B0118301)*1 (Fig.4)


0.10 2016/6/29

Cross electrical screwdriver #0 1

Fig.1

Screw

Fig.3

finger iron parts Fig.2

Fig.4 Fig.5


MODEL : Slice

Auditor： Stanley Chen


Standard Operation ProcedureDocument No. : Slice ODD FA Disassembly SOP Station :



Step：

Issue Dept.：Auditor Stanley Chen NPSU-PPE

Disassembly Bottom case

1(1/1)

1. Loosen bottom case screw *4 (Fig.1)


2. Disassembly bottom case(6070B1044001), and put it in the box

Fig.1

1

24

3


0.10 2016/6/29

Fig. 2





Step：


1. Disassembly left side Rubber (6054B1795001)*2 and right side Rubber (6054B1795101)*2 (Fig.1)

2. Loosen ODD support frame screw(6052B0049401) * 1 and right side iron parts screw (6052B0049401) *1 , and disassembly right side iron parts (6053B1308601) . (Fig.1)

Torque ：2.5 ± 0.2 Kgf．cm

Disassembly rubber & screw

2(1/1)0.10 2016/6/29

Rubber

ODD support frame screw

Iron parts screw


Fig. 2Fig. 1





Step：


FFC CNTR

1. Disassembly ODD FFC from ODD/B (Fig.1)

2. Disassembly ODD toward downside (Fig.1)

Disassembly ODD

3(1/1)0.10 2016/6/29

Fig.1

Toward down side





Step：


1. Disassembly ODD FFC connector from ODD side , and put it(6017B0773501) in the box (Fig.1)

2. Loosen ODD support frame screw (6052B0228001)*2(Fig.1)


3. Put the frame in the box .

Disassembly ODD FFC & support frame

4(1/1)0.10 2016/6/29

Support frame

screw*2

ODD FFC connector

Cross electrical screw driver#1 1

Support fixture 1

Fig.1Fig. 2





Step：


1. Loosen ODD/B screw (6052B0049401)*1(Fig.1)


2. Disassembly ODD/B , and put it in the box.

3. Put bottom case in the box (6070B1043301)

Disassembly top cover

5(1/1)0.10 2016/6/29


图一

Fig.1

screw

Fig. 2


MODEL : Slice

Auditor： Stanley Chen


Standard Operation ProcedureDocument No. : Slice Audio FA Disassembly SOP Station :



Step：

Issue Dept.Auditor： Stanley Chen NPSU-PPE

Disassembly bottom case

1(1/1)

1. Loosen bottom case screw * 4 (Fig.1)


2. Disasembly bottom case(6070B1043601) , and put it in the box .

Fig.1


0.10 2016/6/29

1

2

4

3

Fig. 2





Step：


1. Disassembly Sponge 4 pcs . (Fic.1/Fic.2/Fic.3)

Disassembly Sponge

2(1/1)0.10 2016/6/29

Fig.1

Fig.2

Fig.3





Step：


1. Disassembly speaker connector and Audio /B FFC from ODD/B (Fig.1)

2. Loosen Speaker screw (6052B0362401)*2(Fig.2)


3. Disassembly Speaker (6039B0082301), and put it in the box .

Disassembly Speaker

3(1/1)0.10 2016/6/29

Fig.1

3

4 2

1


Fig.2Fig. 3





Step：


1. Disassembly Mic.-1 cable connector from audio/B , and disassembly it from the frame . (Fig.1)

2. Disassembly Mic.-2 cable connector from audio/B , and disassembly it from the frame . (Fig.2/Fig.3)

Disassembly Mic. -1 & Mic. -2 cable

4(1/1)0.10 2016/6/29

图一

图二

图三





Step：


1. Disassembly rubber from Mic.-1 cable .(Fig.1)2. Disassembly rubber from Mic.-2 cable .

(Fig.2)3. Put the Mic. -1 (6017B0773201)Cable and

Mic. -2 Cable (6017B0773401) in the different box .

4. Disassembly support rubber (6054B1792901)of the audio/B (Fig.2)

Fig.1

Rubber

Fig.1

Mic.-1

Mic.-2

disassembly Rubber

5(1/1)0.10 2016/6/29

Fig.2





Step：


1. Loosen screw *2 , and take the iron parts in the box . (Fig.1)

2. Loosen Audio/B screw(6052B0228001) * 2(Fig.2)


3. Disassembly Audio/B (1310A2843201)

4. Put the Audio/B and top cover (6070B1043401) in the different box .

Disassembly iron parts & Audio/B

6(1/1)0.10 2016/6/29


Fig.2

12

Fig.1

Fig. 3

Product End-of-Life Disassembly Instructionsh22235.€¦ · Cross electrical screwdriver 3.0...

Documents

Transcript of Product End-of-Life Disassembly Instructionsh22235.€¦ · Cross electrical screwdriver 3.0...