HP Environment: Product End-of-Life Disassembly instructionsh22235. · EL-MF877-00 Page 1 Template...

EL-MF877-00 Template Revision C

Last revalidation date 09-May-2018

HPI instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Marketing Name / Model [List multiple models if applicable.]

HP Elite Dragonfly Notebook PC

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact.

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes

Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

1

Batteries, excluding Li-Ion batteries. All types including standard alkaline, coin or button style batteries

1

Li-Ion batteries. Include all Li-Ion batteries if more than one is provided with the product (such as a detachable notebook keyboard battery, RTC coin cell, etc.)

Battery(ies) are attached to the product by (check all that apply with an “x” inside the “[ ]”): [X] screws [ ] snaps [ ] adhesive [ ] other. Explain NOTE: Add detailed removal procedures including required tools in the sections 3.1 and 3.2.

1

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

0

External electrical cables and cords DC Cable for External Power Supply 1

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs

0

http://standards.int.hp.com/elclass/AMF87701.htm


mailto:Sustainability%20and%20Compliance%20Center%20%[email protected]%3e

mailto:Sustainability%20and%20Compliance%20Center%20%[email protected]%3e

EL-MF877-00 Template Revision C

Last revalidation date 09-May-2018

HPI instructions for this template are available at EL-MF877-01

Item Description Notes

Quantity of items included in product

already listed as a separate item above)

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

Components and waste containing asbestos 0

Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Electric screwdriver (Cross) Cross, #1

Screwdriver #2

Screwdriver #3

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment including the required steps to remove the external enclosure:

1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8. 9. 10.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).


MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY MODEL : Empire

制表：朱亚审核：赵承阳

1.00

Station Version Station Version Station Version Station Version Station Version Station Version

1 1.00 9 1.00 17 1.00 25 1.00

2 1.01 10 1.00 18 1.00 26 1.00

3 1.00 11 1.00 19 1.00 27 1.00

4 1.00 12 1.00 20 1.00 28 1.00

5 1.00 13 1.00 21 1.00

6 1.00 14 1.00 22 1.00

7 1.00 15 1.00 23 1.00

8 1.00 16 1.00 24 1.00

Station Ver.

ALL 1.**

2 1.01

Sub-assembly name: Empire FA 拆机 SOP

Document No.: Empire FA 拆机 SOP

A.Current station version list:

B.Version Modify list:

Written by: 翁信茂 Revision:

Date: 2019/9/18

Design

1 of 32Page:

ContentDate

首份SOP製作夏宗全2019/8/20

2019/9/18 内容更新夏宗全

SOP

Document No. : Empire FA Dis-assembly SOP Station :

Operation Des : Ver. : Date :

Fixture list Qty Fixture list Qty

Step：

Attention︰ Pls inform the OP assistant immediately once there is any abnormal

Editor：

Publish： Zhu Ya IE

Loose srew from the buttom case

1. Loose T5 Screw (6052B0473701) *5 from the bottom case。

Torque value：2.0 ± 0.1Kgf．cm

The screw cannot be slipped

1(1/1)

Cross electric low speed screwdriver T5 1

1

2

3

4

5

2019/8/20 1.00

http://www.iec.inventec/sites/NPI/NPISE/Shared Documents/工具及標準表格/SOP Process.ppt

SOP




Step：


Editor：


Remove the Top case & Bottom case

1. Absorb the icon area with suction cup, and disassemble from the upper left corner/ Upper

side

2. Follow the arrow and queue 1-2-3， disassemble upper side and left/right side

Absorb the icon area with suction cup , be care the middle hook, avoid destroy the bottom

case

3. Base on the bottom side , disassemble C case and bottom case Rotatingly.

4. Recycle the bottom case（6070B1587501）

2(1/1)

Note: Absorb lightly,

avoid destroy the

bottom case

icon area

suction cup 1

2019/9/18 1.01

Pull the bottom case lightly

from upper side ,separate

the hook between C case

and bottom case

1 Suction cup absorb & disassemble upper side hook

2

3 3

Key station

SOP




Step：


Editor：


Loose Battery screw

3(1/1)

Cross electric low speed screwdriver #0 1

1. Loose screw M2 x 3L (6052B0185401) * 5 。

Torque value1.5 ± 0.2Kgf．Cm

The screw cannot be slipped and should not fall into the machine

3 5

1

4 2

2019/8/20 1.00


SOP




Step：


Editor：


1. Loose battery screw(6052B0185401) 1、2、3、4

Torque value1.5 ± 0.2Kgf．Cm

The screw cannot be slipped and should not fall into the machine.

2. Disassemble battery CNTR, Recycle battery

Pull out the CNTR horizontally

3. Recycle K-LOCK（6053B1668401）

4(1/1)

Loose screw , disassemble battery

Cross electric low speed screwdriver #0 1

1

2

3

4

6027B0160901 4cell,56W

6027B0160601 4cell,56W

6027B0162901 2cell,38W

K-lock

2019/8/20 1.00


SOP




Step：


Editor：


5(1/1)

Remove gasket， Disassemble WWAN

FOR WWAN model

1.Remove gasket（6054B2006001）*2

2. Disassemble WWAN tip

图一

图二

2019/8/20 1.00

SOP




Step：


Editor：


Disassemble shielding，Remove WWAN cable

6(1/1)

1.Disassemble MB ZIF Shielding(6053B1667501)&WWAN ZIF shielding(6053B1668101) ,and

Recycle them

2.Follow the arrow ， Disassemble the WWAN cable until the MB location

MB ZIF Shielding

6053B1667501 WWAN ZIF Shielding

6053B1668101

FOR WWAN model

Disassemble point

Disassemble point

2019/8/20 1.00

SOP




Step：


Editor：


Disassemble the Fan

7(1/2)

1. Take out the SET screw* 3 (Picture1)。

Screwdriver #0

Twisting force value ：1.5 ± 0.1 Kg/cm

Make sure the screw can’t loose

2. Disassemble FAN cable CNTR（Picture 2）

3. Recycle FAN(excel 1) 。

1

2

3

Picture 1

Screwdriver 0# 1

Vendor PN

Sunon 6033B0073001（normal）

Delta 6033B0072801 （normal）

Delta Titanium 6033B0072701（light）

Excel 1

Avoid

BOSS

pillar

Picture 2

2019/8/20 1.00


SOP




Step：


Editor：


Pay attention the way to take out Fan

7(2/2)

1. The right way take out：hold the edge of fan

（Picture 1）

2. Wrong way (Picture 2)

Don’t press Fan frame

Don’t press Fan and flabellum

Don’t take out Fan cable directly Picture 1

Hold edge/ hold Frame edge

Picture 2

2019/8/20 1.00

SOP




Step：


Editor：


EX

CP

1.Disassemble FPR FFC(6035B0195601 Cvilux 瀚荃/ 6035B0198801Jiudong)

2.Disassemble Click Pad FFC(6035B0196001 Cvilux / 6035B0198601 Jiudong)

8(1/1)

Disassemble K/B FPC & FPR FFC

Finger FFC

FPR

CP FFC Picture 1

EX

2019/8/20 1.00

SOP




Step：


Editor：


1. Disassemble the left and right Speaker cable CNTR。

Put the CNTR out by level

9(1/2)

Disassemble Speaker Cable

Picture 1

put Spk

cable into U

groove as

marked

Spk cable avoid

boss pilar

2019/8/20 1.00

SOP




Step：


Editor：


9(2/2)

Disassemble KB FFC CNTR

1. Disassemble KB FPC CNTR(Picture 1）

Picture 1

2019/8/20 1.00

SOP




Step：


Editor：


1. Disassemble K/B B/L FFC

2. Disassemble extend FPC CNTR

3. Disassemble extend FPC(6046B0113701CMI / 6046B0119201Chuanyi), Recycle it

10(1/1)

Disassemble Extend FPC& BL FPC

Picture 1

KB BL CNTR Extend FPC CNTR

2019/8/20 1.00

SOP




Step：


Editor：


Disassemble power FFC/ touch cable

11(1/1)

1.Disassemble power FFC CNTR

2.Disassemble touch cable CNTR

Touch CNTR

2019/8/20 1.00

SOP




Step：


Editor：


12(1/1)

Disassemble wlan and CCD cable

1. Pick thermal mylar（6054B2210001）Picture 1

2. Disassemble wlan CNTR and CCD CNTR

Ionizer 1

Picture 1

Picture 2

2019/8/20 1.00

Key station

SOP




Step：


Editor：


1.Disassemble SSD shielding(6053B1667801) and SSD mylar(6054B1547701),and recycle

2. Take out SSD&WWAN screw M2 x 2L (6052B0156201)*2

Twisting force value ：1.5 ± 0.1Kgf．cm

Make sure the screw can’t loose，can’t be dropped into the units

3. Disassemble SSD and WWAN，recycle them

13(1/1)

Disassemble the SSD and WWAN

Screwdriver #0 1

Picture 1

Picture 2 Picture 3

2019/8/20 1.00


SOP




Step：


Editor：


1. Take out Audio/B(1310A3075301) screw（ M2x3L 6052B0185401)*2 。



2. Disassemble audio/B MB side CNTR，take out audio/B recycle

3.Take down the washer of MB

14(1/1)

Disassemble Audio/B

图一

Picture 1

Screwdriver #0 1

2019/8/20 1.00


SOP




Step：


Editor：


FOR WWAN platforms

1. Sort the WWAN cable（Picture 1）

2. Disassemble WWAN FFC CNTR，and open the marked red gum （Picture 2）

FFC should be assembled in right place, should not be take off

FOR all platforms

1.Disassemble the LCM cable and CNTR which near MB

Take out the CNTR on level

15(1/1)

Picture 1

Disassemble WWAN and FFC，LCM Cable

Picture 2

2019/8/20 1.00

Key station

SOP




Step：


Editor：


1. Take out the USB/B screw M2 x 3L (6052B0185401) * 3 (Picture 1/2)。

Twisting force value ：1.5 ± 0.1Kgf．Cm


Order:1→2→3

2.Take out the USB/B，disassemble the USB/B and FPC CNTR，recycle the USB/B

Take out the USB/B from the under cut direction

When disassemble the USB CNTR，FPC and CNTR should have about 10° angle

16(1/1)

Screwdriver #0 1

Disassemble USB/B

Picture 1

3 1

2

WWAN NON-WWAN Picture2

1

2

3

2019/8/20 1.00


SOP




Step：


Editor：


1.Open USB/B CNTR

2. Take out WWAN USB FPC(6035B0195201CMI / 6035B0199201 Chuanyi)or WLAN USB

FPC(6035B0195301CMI / 6035B0199301Chuanyi)，Recycle them

When disassemble the FPC and CNTR，there should be 10° angle

17(1/1)

Take out USB/B FPC

Picture 3

Picture 4

MB

MB

Picture 5

Ionizer

1

2019/8/20 1.00

SOP




Step：


Editor：


1. Take out the M/B screw M2 x 3L (6052B0185401) * 3 (Picture 1)。

Twisting force value ：1.5 ± 0.1Kgf．Cm


Order:1→2→3

When assemble the 3th screw， take care the LCM cable, can’t damage it

2.Disassemble MB

Take out MB slantly

Take care when disassemble MB to avoid damage it

18(1/1)

Screwdriver #0 1

Picture1

Disassemble MB

3

1

2

2019/8/20 1.00

Key station

Key station


SOP




Step：


Editor：


1

2

3

4

1. Put the MB on Thermal assemble fixture，and put on the cover。

2. Take the thermal SET screw*4 by turn (Picture 1)

Screwdriver #0

Twisting force value ：1.0 ± 0.1 Kg/cm

Make sure the screw can’t loose

3.Recycle thermal into magazine

Take care to take the thermal，don’t damage the thermal to change shape

4.Take out MB ，disassemble USB Type-C Shielding CAM (6053B1668001)，separate the shielding and MB in different box

Disassemble it from the triangle location

Take care to avoid damage the component

Disassemble MB& thermal& shielding

19(1/1)

Thermal Module assemble fixture 1

Screwdriver 0# 1

Picture 1

Excel 1

Category Vendor PN

Cu Heatpipe CCI 6043B0264001

Cu Heatpipe Delta 6043B0264011

2019/8/20 1.00


SOP




Step：


Editor：


1. Disassemble the PC card (6051B1313801) from snap joint。

There is a becket between PC card and snap joint

2. Take out power /B

3.Separate Power/B(1310A3075201)and power button（ 6051B1314201)

When separate the button，take it gently to avoid damage the component on power/B

Disassemble Power Button & Power/B

20(1/1)

Power/B

PC Card

PC snap

joint

2019/8/20 1.00

SOP




Step：


Editor：


21(1/1)

1.Disassemble the LCM cable，Open up the gum（Picture 1）

2.Take hinge screw oiut (6052A0003501)* 6(Picture 2)。

Twisting force value ：2.5 ± 0.1Kgf．cm，

Make sure the screw can’t loose, the screw can’t assemble on the Cable

Order 1 2 3456 78

Screwdriver #1 1

Take out Hinge screw*6

Picture 1

2 5 6

1 4

3

Picture 2

2019/8/20 1.00

Key station

SOP




Step：


Editor：


Disassemble LCM

22(1/1)

1. Open the LCM in 260~270°，and then take it on support fixture。

2 Assemble Hinge bracket screw(6052A0003501) fix it by screw both left and right

3 Twisting force value ：2.5 ± 0.1Kgf．Cm


3.Along under cut direction，take out hinge up，recycle it into magazine

Pay attention when taking hinge up, don’t take it forcibly to avoid the TOP be out of

shape

Picture1

A cover and LCM combine fixture 1

Screwdriver #1 1

Picture 2 Picture 3

Picture 1

2019/8/20 1.00

SOP




Step：


Editor：


1.Along the WWAN Antenna ，disassemble the left and right cable in turn

Disassemble WWAN Antenna

23(1/2)

FOR WWAN model

2019/8/20 1.00

SOP




Step：


Editor：


Disassemble antenna holder

23(2/2)

For WWAN model

1 . Take out the Holder(6051B1315701) from the

corner，recycle it into magazine

Picture 2

Under Cut

2019/8/20 1.00

SOP




Step：


Editor：


1.Take out the right/left Speaker screw ( M2x3L 6052B0185401 ) *2。



2.TOP take down the spk from Top，recycle it into magazine

Separate them by right and left

24(1/1)

Disassemble Speaker

Picture 1 LeftSpeaker

1

Screwdriver # 0 1

Right Speaker

1

6039B0099201 FG, L-speaker

6039B0099101 Luxshare, L-speaker

2019/8/20 1.00

SOP




Step：


Editor：


1.Take the finger screw out( M2x2L 6052B0156201 )



2.Take out finger brkt（ 6053B1668301）and finger module(6042B0553001)，recycle it

When take out the FPS，please only hold the FPS module edge，don’t touch and press

the component on FPS

25(1/1)

Disassemble finger

Screwdriver #0 1

2019/8/20 1.00


SOP




Step：


Editor：


26(1/1)

Disassemble WWAN Antenna-Aux1

1. Disassemble WWAN Antenna Aux1(6036B0243701) and recycle it into its magazine

FOR WWAN model

2019/8/20 1.00

SOP




Step：


Editor：


1. Disassemble WWAN Antenna FFC，recycle into its

magazine

2. Take out the WWAN Antenna Main(6036B0243601)

from Top，recycle it into the magazine

27(1/1)

Disassemble WWAN Antenna-Main

FOR WWAN model

FFC

Cvilux 6035B0195501

Jiudong 6035B0198301

Picture 1

2019/8/20 1.00

SOP




Step：


Editor：


1. Take Click pad BRKT screw out M2x2L (6052B0156201* 3 ) (Picture 1)。

Twisting force value ：2+/-0.1kgf.cm


2.Take out the clickpad slantly(picture2）

3.Recycle the TOP and clickpad in each box

Disassemble Click pad

28(1/1)

Screwdriver #0 1

Picture 2

Clickpad Module

Sunrex 6034B0038701

2019/8/20 1.00

Picture 1

1 3 2

Key station

HP Environment: Product End-of-Life Disassembly instructionsh22235. · EL-MF877-00 Page 1 Template...

Documents

Transcript of HP Environment: Product End-of-Life Disassembly instructionsh22235. · EL-MF877-00 Page 1 Template...