COURSE DATA SHEET

Course Title: Process Simulation Modeling (HYSYS I )

Theoretical course 0.0 % Practical Course 100 %

Course Duration 6 Days Course Code PRC-S-101

Objectives :

Learn how to be able to build the fluid package, navigate the model and be familiar with tools used in the model in order to simulate the plant.

Learn how to simulate different Unit operations existing in the GOSP plants.

Lear how to develop flare network models for convergent, divergent and looped systems.

The engineers will be able to perform steady-state design, rating, or debottlenecking of single or

multiple flare and vent systems.

Who will benefit :

Operation Engineers/Supervisors

Jr. Process engineers

Non process engineers (with oil & gas experience)

Advanced Students

Course Details : (Topics) Getting Started • Enter necessary elements to fully define a Fluid Package • Specify required parameters in order to execute flash calculations and fully define material streams • Modify and set desired units of measure • Review stream analysis options Oil, gas, and water separation Process Problem Analysis, Building the Simulation, Case Study & Further Study For: • Two & Three Phase separators • Realistically Simulate Separator Carryover & entrainment • Heaters, Coolers, Shell & Tube Heat Exchangers. Air coolers. Pumping and Compression Process: • Problem Analysis, Building the Simulation, Case Study & Further Study For •Simulation of compressors and pumps, with and without curves. Calculation of outlet conditions. Gas Dehydration & Sweetening: •Absorber column models and templates •Gas Sweetening & Dehydration Case studies. Reaction •How to define several types of reactions. How to use them inside reactors in the flowsheet. •Power Plant Case Study

Fractionation: •Distillation columns: How to install, define and solve distillation columns. •De-Ethanizer Operation •Case Study