instructions

A3 pramette pushchair

IMPORTANT: KEEP FOR FUTURE REFERENCEwww.mamasandpapas.com

Mamas & PapasColne Bridge RoadHuddersfield HD5 0RH

customer care helpline: 0870 8307700customer care e-mail: customer.care@mamasandpapas.co.uk

Filling material(s) andcovering fabric(s) meet the

requirements for resistance tocigarette and match ignition in

the 1988 safety regulations.

CARELESSNESSCAUSES FIRE

RESISTANT

A3 Pramette Cover 21/7/06 14:39 Page 1

– 1 –

A3 PRAMETTE PUSHCHAIRDear Customer,

Thank you for choosing the Mamas & Papas A3 Pramette Pushchair.

The stylish lightweight A3 Pushchair is ideal when travelling by car, publictransport or on holiday.

The Mamas & Papas Primo Viaggio Car Seat and a compatible carrycotcan also be attached to the pushchair using the Surefix ‘right first time’attachment system.

Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Instructions for safe use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4General Operation

Opening the pushchair from the box . . . . . . . . . . . . . . . . . . . . . . . . 5Attaching the wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Fitting the bumper bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Fitting & removing the basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Adjusting the backrest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Operating the adjustable leg rest. . . . . . . . . . . . . . . . . . . . . . . . . . . 10Operating the swivel wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Operating the brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Attaching the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Removing the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Opening & removing the bumper bar. . . . . . . . . . . . . . . . . . . . . . . . 14Using the harness tidy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Using & adjusting the harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Using the pushchair as a pram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17Using the cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Folding the pushchair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Opening the pushchair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Fitting a footmuff or seat pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Attaching the apron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Fitting the Primo Viaggio car seat . . . . . . . . . . . . . . . . . . . . . . . . . . 23Removing the Primo Viaggio car seat. . . . . . . . . . . . . . . . . . . . . . . . 24Fitting a compatible carrycot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Removing a compatible carrycot . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Attaching the Coperto raincover . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Using the Coperto raincover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Attaching the Coperto raincover to the Pramette. . . . . . . . . . . . . . . 29Using the Coperto raincover with the Pramette . . . . . . . . . . . . . . . . 30

Care & maintenanceRemoving the fabric cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Care & maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

CONTENTS

– 3 –

INSTRUCTIONS FOR SAFE USE

• WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY.

• NEVER LEAVE YOUR CHILD UNATTENDED AT ANY TIME.

• Always ensure that your pushchair is fully erect and all locking clips areengaged. (Take particular care if the PVC Raincover is fitted. Check that it is notentangled or preventing the locking mechanism from functioning correctly).

• Your pushchair is supplied with a five-point harness. Always use the harnesswhen your child is in the seat. Ensure that the harness is correctly adjusted,providing a snug fit around your child. Adjustments can be made using thebuckles on the shoulder, waist and crotch straps, see ‘Using & Adjusting theHarness’ on page 15. The pushchair is supplied with ‘D’ ring harnessattachment points. These are located on either side at the base of the backrestand are for fitting a separate harness conforming to BS 6684 if required.

• Always ensure the brakes are correctly engaged whenever the pushchair is leftfor any reason, even if only for a short time on a flat surface.

• Care should be taken when using any PVC cover. Regularly check that your babyis comfortable and not over heating. There are mesh ventilation panels on thesides of the cover. These are essential to aid the flow of cool air around yourbaby. Unless it is raining, the raincover should either be removed or the topsection opened, see page 28.

• Always ensure your child is clear of moving parts before you adjust the positionof the backrest, footrest or canopy.

• Always manoeuvre your pushchair up and down kerbs and steps gently. Do notlet your pushchair drop. Carry it up stairs whenever possible.

• Never allow additional children to ride on the pushchair at any time.

• Never overload your pushchair with additional goods.

• Do not hang shopping from the handles. Do not use any replacement parts oraccessories e.g. child seats, raincovers, stand-on platforms etc, except thoserecommended or supplied by Mamas & Papas. The use of non-approvedreplacement parts or accessories may damage or make your pushchair unsafe.

• Never force your pushchair. Adjustments and locks should be free and easy tooperate.

• Do not store your pushchair in a damp place. Always allow the fabric to drynaturally away from direct heat.

• The basket supplied with your pushchair is designed to hold a maximum of3kgs. Excessive weight could damage the basket or impede the safe operationof the pushchair.

• We recommend that you fit a Mamas & Papas Sun Canopy to shade your child.Note: These accessories and components supplied with the pushchair, such asthe hood, may not provide full protection and should be used in conjunctionwith sun protection cream and appropriate clothing.

– 2 –

PRODUCT INFORMATION

This pushchair has been designed and tested to comply with the latest British andEuropean safety standards.

• This pushchair is designed for children from birth to 15kgs (3 years of age approximately)

• The Primo Viaggio Car Seat can be attached to the pushchair

• A compatible carrycot can be attached to the pushchair

• The pushchair comes equipped with a five-point harness Always use the harness when your child is in the seat

• The suspension on all four wheels gives your child a comfortable ride

• A footrest that can be adjusted to two positions

• A backrest that can be adjusted to four positions

• A shower resistant removable fabric hood

• Lockable swivel wheels for easy manoeuvring

• An opening / removable bumper bar

• A removable shopping basket

• The pushchair is free standing once it has been folded

ACCESSORIES

The Mamas & Papas range of coordinating pram and pushchair accessories areavailable. This range includes bags, footmuffs, sun canopies, raincovers, prambedding & mattresses. Also included are pram toys.

AFTER SALES SERVICE: If you need assistance, spare parts or you are unhappy with anyaspect of the goods please contact Customer Services on: 0870 8307700,or e-mail us at: customer.services@mamasandpapas.comVisit our website at www.mamasandpapas.com for the latest product information.

– 5 –

OPENING THE PUSHCHAIR FROM THE BOX

Remove the two protectivecaps from the ends of thehandle frame. Never attempt to use thepushchair with the protectivecaps fitted as the locks willnot engage.

Grip the handlebar and pullthe catch on the primaryframe lock upwards todisengage it.

Slide the button on the twistgrip secondary lock sidewaysand hold whilst rotating it asfar as it will go.Lift the pushchair upwardsand the frame willautomatically start to open.

You may need to press downlightly on the seat to ensurethe safety locks haveengaged. There are twosafety locks, one on each sideof the pushchair.

Twist grip, secondary lock

– 4 –

FEATURES

Bumper bar

Adjustable leg rest

Swivelwheel lock

Primaryframelock

Brakelever

Hoodattachmentpoint

Backrestadjustmenthandle

Backrest

Safety harness

Swivel wheellock

Cup holder

Twist grip secondarylock

Closinghandle

Basket

Raincover

Hood

Apron

– 7 –

FITTING THE BUMPER BAR

Remove the caps in the endsof the armrests by pushingthe button on the undersideof the armrest upwards.With the button still pushedin, slide the cap out of thearmrest.Repeat the process for theother armrest.

The bumper bar can be set intwo positions, the inner orthe outer setting.To change the position of thebumper bar, push the buttonsunder the armrests upwardsand slide the bumper bar in orout as required until thebuttons lock into position.

Insert the two ends of thebumper bar into the holes inthe ends of the armrests.Push the bumper bar in untilthe ends click into position.

– 6 –

ATTACHING THE WHEELS

Attaching the rear wheels:Slot the rear wheels and brakeassembly onto the back legsof the pushchair. Ensure that the brake peddleson the wheels are facing outfrom the back of thepushchair. Push the wheelsdown until they lock intoposition. The locking pins inthe rear legs must protrudethrough the wheel housings.Check the wheels are correctlyfitted by trying to pull themfrom the frame.

Attaching the front wheels:Ensure the swivel wheel lockis in the down position. Slotthe two front wheels onto theends of the front legs.

Push the wheel housing ontothe end of the leg until itlocks into position.

Always check that the wheelsare correctly fitted byattempting to pull them fromthe frame.

– 9 –

ADJUSTING THE BACKREST

Lowering the backrest:Pull the backrest adjustmenthandle upwards and lower thebackrest into the position yourequire. Release the handleand move the backrest up ordown until it locks intoposition.The backrest can be adjustedto one of four positions.

Raising the backrest:Grip the middle of thebackrest and lift upwards untilit locks in the position yourequire.

– 8 –

FITTING AND REMOVING THE BASKET

Before fitting the basket youwill need to remove thebasket frame from thepushchair.Press the two buttons locatedon the inside of the basketframe at the rear of thepushchair, and slide out theframe.

Attach the two fabric loops atthe front of the basket overthe hooks under the seat.Removal is the reverse offitting.

We recommend that you donot exceed a load of 3kgs inthe basket. Excessive weightcan destabilise or damage thebasket.When folding the pushchairalways check that the basketis not trapped or preventingthe pushchair from locking.

Feed the basket framethrough the fabric rim of thebasket. Re-attach the basket frame tothe pushchair. Insert the endsof the basket frame into theplastic housing on the rearlegs and push it in until itlocks into place.

– 11 –

OPERATING THE SWIVEL WHEELS

Fixed mode:Push the catches between thefront wheels upwards.The wheels will now be fixedand will not swivel.

Swivel mode:Push the catches between thefront wheels down.The wheels can now be rotatedthrough 360º.

The front wheels on thepushchair can be used in eitherthe fixed or swivel mode.

– 10 –

OPERATING THE ADJUSTABLE LEG REST

Positions 1 & 2 are forgeneral use. Position 3 is used when acompatible carrycot isattached to the pushchair, seepages 25-26 for moreinformation.Position 3 is also selectedwhen, using the pushchair asa pram, see pages 16-17.

Adjusting the leg rest:Pull the catches on both sidesof the leg rest towards thefront of the pushchair, thenlift or lower the leg rest tothe desired position. Release the catches to lockthe leg rest in position.

The leg rest on the front ofthe pushchair can be adjustedfor the comfort of your childand so that a compatiblecarrycot can be attached.

Note: The leg rest must be inthe lowest position when thepushchair is being used by achild that can sit unaided andthe backrest is in an uprightposition.

– 13 –

ATTACHING THE HOOD

Clip the hood brackets ontothe frame.

REMOVING THE HOOD

Push the two tensioning barsdown to lock the hood open.

Fasten the two press studs onthe wings of the hood to theplastic studs on the insidefaces of the armrests.Attach the two press studs onthe back of the hood to thetop of the backrest.

Undo the four press studs andfold the tensioning barsupwards.Lever the side edges of thehood clips outwards and liftthe hood from the pushchair.

– 12 –

OPERATING THE BRAKES

Engaging the brakes: Press down on both ends ofthe brake bar with your toes.Check the brakes are correctlyengaged by rocking thepushchair backwards andforwards.

Releasing the brakes: Push upwards on both endsof the brake bar with yourtoes until the wheels movefreely.

WARNING: Always engagethe brakes when you leave orlet go of the pushchair for anyreason.

– 15 –

Locking the harness:Remove the yoke from theharness tidy, see above.Lock the harness by pushingthe tongues on the ends ofthe waist straps into thebuckle on the crotch strap, 1.The harness will automaticallylock when the tongues havebeen fully pushed in.

USING THE HARNESS TIDY

Unlocking the harness:Squeeze the ends of thetongues together, 2 and thenslide them out of the buckle,3. Your child can now beremoved from the pushchair.

IMPORTANT: Every time you place your child in the pushchair or when everyou alter the position of the backrest always check that the harness is correctlyfitted and adjusted using the shoulder and waist strap buckles. Tighten theharness until it fits snugly around your child.

You will find a tab on theadjustment yoke at the backof the harness where theshoulder straps join the waiststrap. Place the tab on theadjustment yoke through thefabric loop in the middle ofthe backrest when not in use.Do not use the harness tidywhilst the harness is fittedto the child.

IMPORTANT: The harness tidy is designed to only be used to prevent theharness from becoming tangled when not in use. Never secure your child intothe safety harness whilst it is still held in the harness tidy on the rear backrest.

USING AND ADJUSTING THE HARNESS

– 14 –

OPENING & REMOVING THE BUMPER BAR

With the buttons held in, pullboth ends of the bumper baraway from the armrests.Always fit the bumper barwhen your child is in the seat.

Opening the bumper bar:As your child gets older, youmay wish to open one side ofthe bumper bar in order toallow easier access to thepushchair seat. Locate the button on theunderside of the armrest andpush it upwards.

With the button held in, pullone side of the bumper barfrom the armrest to open. To close the bumper bar,depress the button and slotthe end of the bumper barback into the armrest. Checkit is locked in position byattempting to pull it outagain.

Removing the bumper bar:The bumper bar can becompletely removed forcleaning or when a compatiblecarrycot is attached to thepushchair.Locate the buttons on theunderside of the armrests andpush them upwards.

WARNING: Once the child is secured in the pushchair seat the bumper barmust be locked into the armrest.

– 17 –

USING THE PUSHCHAIR AS A PRAM

Lower the backrest into thelowest position, see page 9.Lift the foot end of the pramupwards from the seatsbackrest.

Fitting the hood:Attach the hood to the frameon the opposite side to thehandles by pushing the hoodbrackets onto the frame untilthey lock in place.

Fasten the studs on the backof the hood to the studs onthe underside of thepushchair footrest.Push the tensioning bars onthe sides of the hood downuntil they lock into place. Fold the flaps on the hood upbetween the inside of thehood and the armrests.

Attaching the apron:Slot the apron over thebackrest of the pushchair.Fasten the press studs on thesides of the apron to thestuds on the sides of thepushchair.

Reverse this procedure toconvert the pram back into apushchair.

– 16 –

USING THE PUSHCHAIR AS A PRAM

The pushchair can beconverted into a pram forchildren from birth until thechild can sit up by itself oruntil it reaches a weight of9kgs.Remove the hood and apronif they are fitted.Raise the leg rest into itshighest position, see page 10.

Slot the tab on the shoulderstraps of the harness into thetab on the seats backrest, see page 15.Pull the bumper bar out to itsfully extended position, seepage 7.

Unfasten the zip on the topof the backrest.Fold the cover down over thefront of the bumper bar

Zip the top of the backrestcover to the front of thefootrest cover.Push the cover down onto theseat.

– 19 –

Closinghandle

FOLDING THE PUSHCHAIR

Note: The pushchair can befolded when you are using itas pram.

Grip the handlebar and pullthe catch on the primaryframe lock upwards todisengage it.

Slide the button on the twistgrip secondary lock sidewaysand hold whilst rotating it asfar as it will go.Note: Do not applydownward force to thehandlebars until the twist griphas been fully rotated.

Apply downward pressure tothe handlebars and the framewill automatically start to fold.Use the closing handleindicated in the diagram toassist you in folding thepushchair. Grip the closinghandle and pull it up whilstapplying downward pressureto the handlebars.

When the pushchair is fullyfolded, ensure that the twolocking catches on thehandlebars lock over the clipson the rear legs.

WARNING: When folding thepushchair take care not to hitthe ends of the handle frameon the floor.

– 18 –

USING THE CUP HOLDERS

Opening the cup holders: The pushchair is fitted withtwo foldable cup holders.Lift the top ring upwards untilit locks in the horizontalposition.Pull the bottom support downuntil it locks in the horizontalposition.

Rotate the top section of thebottom support outwardsuntil it locks in position.

You can now place the drinkin the cup holder.

Closing the cup holders:Reverse the process foropening them.

WARNING: Never place hotdrinks in the cup holders.Never hang items on the cupholder.

– 21 –

SPECIAL FEATURENot all models of the A3 Pushchair are supplied with or use thisspecial feature. For more information please consult your retailer.

Before fitting the footmuff orseat pad unfasten the harnessand slide the shoulder strapclips off the tongues on theends of the waist straps.

FITTING A FOOTMUFF OR SEAT PAD

Shoulderstraps

Waiststrap Waist

strap

Crotchstrap

Remove the crotch strap byslotting the buckle on the endof the crotch strap throughthe hole in the seat and fabriccover, see page 31.

Refit the crotch strap but firstslot the webbing through thelowest hole in the footmuff,back pad or seat pad.

Slot the two shoulder strapsthrough the horizontal slot inthe middle of the footmuff,back pad or seat pad.

The two waist straps caneither go around the outsideof the back pad or seat pad,as shown in Version 1.Or slot them throughhorizontal slots in the sides ofthe footmuff, back pad orseat pad, as shown onVersion 2.

Finally, slide the shoulderstrap attachments back ontothe tongues on the ends ofthe waist straps.

Crotchstrap

Shoulderstraps

Waiststrap Waist

strap

Version 1

Version 2

Shoulderstraps

– 20 –

OPENING THE PUSHCHAIR

Grip the handlebar and pullthe catch on the primaryframe lock upwards todisengage it.

Slide the button on the twistgrip secondary lock sidewaysand hold whilst rotating it asfar as it will go.Lift the pushchair upwardsand the frame willautomatically start to open.

Ensure that the pushchair isfully open and that the locksare correctly engaged.

You may need to press downlightly on the seat to ensurethe safety locks have engagedcorrectly.

– 23 –

FITTING THE PRIMO VIAGGIO CAR SEAT

Push the car seat down ontothe attachment brackets untilit locks into place. Check the car seat is firmlyattached by attempting to liftit from the pushchair.Note: You may find the carseat easier to fit if you openone side of the bumper bar.Always lock the bumper baronce the seat is fitted.

Apply the brakes. Recline the backrest to itslowest setting (see page 9),then raise it up one position.Lock the bumper bar in theouter position, see page 7.

In the corners of the seatwhere the backrest joins theseat base, there are two fabricflaps. Under the flaps are thetwo attachment brackets.Rotate the attachmentbrackets up until they lock inthe vertical position.

Make use of the harness tidy(see page 15) to keep thesafety harness away from theattachment brackets.

With the car seat facingtowards the rear of thepushchair, align the twocentre recesses in the sides ofthe car seat with theattachment brackets. Thenlower the car seat onto them.

– 22 –

Push the bottom part of theapron under the bumper baralongside the leg rest.

ATTACHING THE APRON

Fasten the zip on the bottomedge of the apron to the zipon the front edge of thefootrest cover.

Removal is the reverse offitting.

– 25 –

FITTING A COMPATIBLE CARRYCOT

Apply the brakes. Recline the backrest to itslowest position (see page 9).Remove the bumper bar, seepage 14.Raise the leg rest to itshighest position, see page 10.

In the corners of the seatwhere the backrest joins theseat base, there are two fabricflaps. Under the flaps are thetwo attachment brackets.Rotate the attachmentbrackets up until they lock inthe vertical position.

With the head end of thecarrycot facing towards thefront of the pushchair, alignthe two recesses in the sidesof the carrycot with theattachment brackets. Thenlower the carrycot onto them.

Push the carrycot down ontothe attachment brackets untilit locks into place. Check the carrycot is firmly inplace by attempting to lift itfrom the pushchair.

– 24 –

REMOVING THE PRIMO VIAGGIO CAR SEAT

Note: Always apply thebrakes on the pushchairbefore removing the car seat.

Pull the lever located on theback of the car seat upwardsand hold in the fully pulledout position.

Lift the car seat clear of thepushchair.

Pull the locks on the sides ofthe frame outwards and hold.

Push the attachment bracketsdown into the recesses andpull the fabric cover back overthem. WARNING: Never place achild in the pushchair with theattachment brackets up.

– 27 –

ATTACHING THE COPERTO RAINCOVER TO THE PUSHCHAIR

Attach the straps at thebottom of the raincoveraround the frame below thefootrest.

Zip the hood and raincovertogether. Support theraincover whilst zipping it tothe hood.

Attach the straps on the sidesof the raincover around theframe. Fasten them in placewith the press studs on thestrap.

IMPORTANT: The raincover is designed for outdoor use only. Take care when fittingor adjusting the raincover as undue force may damage it. Open the front of theraincover when inside or in hot weather to prevent your child from over heating.

– 26 –

REMOVING A COMPATIBLE CARRYCOT

Note: Always apply thebrakes on the pushchairbefore removing the carrycot.

Grip the centre of thecarrying handle with onehand.

With the other hand, slide thelocking handle (positioned onthe foot end of the carrycot)horizontally and then upwardsand hold.

Still holding the lock up, liftthe carrycot clear of thepushchair.Once the carrycot has beenremoved always refit thebumper bar, see page 7.

Pull the locks on the sides ofthe frame outwards and hold.

Push the attachment bracketsdown into the recesses andpull the fabric cover back overthem. WARNING: Never place achild in the pushchair with theattachment brackets up.

– 29 –

ATTACHING THE COPERTO RAINCOVER TO THE PRAMETTE

Attach the straps on the sidesof the raincover around theframe. Fasten them in placewith the press studs on thestrap.

Zip the hood and raincovertogether. Support theraincover whilst zipping it tothe hood.

Attach the straps at thebottom of the raincoveraround the frame above therear wheels.

IMPORTANT: The raincover is designed for outdoor use only. Take care when fittingor adjusting the raincover as undue force may damage it. Open the front of theraincover when inside or in hot weather to prevent your child from over heating.

– 28 –

USING THE COPERTO RAINCOVER WITH THE PUSHCHAIR

Using the raincover with thecar seat: Follow the procedure above tofit the raincover,but attach thetwo bottom straps higher upthe front legs.

Opening the front of theraincover:The top of the raincovershould be unzipped from thehood and folded onto theapron when taking your childinside or during warm dryspells.

Folding the pushchair withthe raincover fitted:Unfasten the straps and foldthe hood back. Gather theraincover up and place it ontop of the hood. Avoidtrapping the raincover whenfolding the pushchair.

– 31 –

REMOVING THE FABRIC COVER

Disengage the front studs on thearmrest covers by sliding themforwards and out. Then slide the rearstuds backwards and out.

Unfasten the two press studs on thesides of the backrest and the twopress studs on the side edges of theseat base.

Unfasten one side of the harness byremoving one of the screws. You willneed to support the other side of theframe with your fingers.

Unfasten the four press studs holdingthe fabric cover to the frame.Gently pull the cover off the front ofthe footrest.

Finally, pull the cover off the backand sides of the pushchair.Refitting is the reverse of removal.

Pressstud

Remove the harness crotch strap bypushing the buckle on the undersideof the seat up through the slot in theseat base and fabric cover.

– 30 –

USING THE COPERTO RAINCOVER WITH THE PRAMETTE

Opening the front of theraincover:The top of the raincovershould be unzipped from thehood and folded onto theapron when taking your childinside or during warm dryspells.

Folding the pushchair withthe raincover fitted:Unfasten the straps and foldthe hood back. Gather theraincover up and place it ontop of the hood. Avoidtrapping the raincover whenfolding the pushchair.

– 32 –

I03

24

:V

3/1

2/0

5

ALL OUR PRODUCTS ARE MADE FROM THE FINEST QUALITY MATERIALSAND ARE MANUFACTURED UNDER THE STRICTEST QUALITY CONTROLS

We guarantee all our products or part thereof, for a period of six months from delivery to the consumer against faultymanufacture. This guarantee is not effective against damage caused as a result of incorrect usage of the product or

accidental damage. This in no way affects your statutory rights.

CARE AND MAINTENANCEYour pushchair deserves careful handling and requires regular maintenance• Regularly check that the safety harness is correctly fitted and that the webbing has not

become frayed or damaged. If the harness is damaged, we recommend that a new one is fitted. For more information contact Customer Services.

• Clean the plastic parts of the pushchair with a damp cloth, do not use abrasives or bleach.• Clean and lubricate the wheels, safety locks (where appropriate) and sliding parts

using a light oil or silicon spray. Do not use heavy oil as this will attract dust and grit which tend to clog and damage moving parts. If in any doubt contact our Customer Services.

• We strongly recommend that you have your pushchair serviced regularly, particularly after the first six months. To do this contact either your retailer or call Customer Services Helpline.

Fabric care• All the Mamas & Papas pushchair fabrics are shower resistant. Should your pushchair

become wet do not fold the hood or apron when you take the item inside. Always allow the fabrics to dry naturally away from strong heat sources such as fires, radiators and out of direct sunlight.

• Whilst fabrics are carefully selected and tested, washing, wear and normal exposure to bright sunlight may cause their colour to change.

• The exposed edges of fabric covers are often the first to wear and fray, remember this when storing or transporting your pushchair/carrycot and accessories.

• Light soiling to the pushchair can be removed with a damp sponge and a mild detergent.• Washing instructions: Remove the fabrics following the procedure given in these

instructions. Hand wash the fabric with a mild detergent at 30º, dry the fabric flat away from direct heat and do not tumble dry. Do not use abrasives or bleach to clean the fabric.

• Should a fault arise with your pushchair please contact either your retailer or phone Customer Services.

GUARANTEETo validate this guarantee, fill in this coupon and return to: Mamas & Papas, Colne Bridge Rd, Huddersfield, HD5 0RHAlternatively, call our Guarantee Registration Line on: 0870 8307700 or visit our website: www.mamasandpapas.com

Title (Mr/Mrs/Miss/Ms)................... First name............................................................ Surname .......................................

Address ........................................................................... ..................................................................................................

................................................................................................................................... Postcode .......................................

Daytime Tel. No. .............................................................. Email ........................................................................................

Baby’s due date/date of birth.............................................................................................................................................

Product purchased A3 Pramette Pushchair.................... Purchase date........................... Price .......................................

If you would like to receive further information regarding new products, promotions and special offers from Mamas & Papas please tick theboxes indicating your preferred method(s) of contact. Post ; Email .

If you would like to receive information from carefully selected 3rd parties please tick the boxes indicating your preferred method(s) ofcontact. Post ; Email .

AFTER SALES SERVICE: If you need assistance, spare parts or you are unhappy with anyaspect of the goods please contact Customer Services on: 0870 8307700,or e-mail us at: customer.services@mamasandpapas.comVisit our website at www.mamasandpapas.com for the latest product information.