PQ-CT with PQube3 series for AC/DC Power Quality Monitoring...For power quality monitoring, PQ3...
Transcript of PQ-CT with PQube3 series for AC/DC Power Quality Monitoring...For power quality monitoring, PQ3...
1
with
for
AC/DC Power Quality Monitoring
2
J&D Introduction
New PQube 3 series – PQube 3e
PQube 3 installed for power quality monitoring
PQ-CT – suitable for PQube 3 series
PQube 3 series future in South Korea
1
2
3
4
5
To be a market leader, recently J&D starts
JAGUAR IoT TEAM for energy saving
monitoring – JAGUAR brands for power
quality meter, PQ-CT the high precision
current sensors and PQ-VT the high
performance voltage sensors.
3
Established in 1994, expert manufacturing
for current & voltage sensors, smart
meters, power quality meter in South
Korea.
• The ultra-accurate power quality analyzer with Class A certification as per
IEC 61000-4-30 Edition 3
• Can be used to monitor four 3-phase loads, 14 single-phase loads, or any combination.
▶ Measuring range: 1A – 6000A
• Various measuring parameters; sag, swell, voltage interruptions, harmonics up to 50th, THD,
flicker, imbalance, in-rush currents, 4-quadrant energy, etc.
▶ High-frequency sampling up to 4MHz for impulse detection and event triggered
recording features for most of the parameters.
• Communication: Ethernet with various protocols – Modbus TCP, SNMP, FTP/HTTP, NTP/SNTP,
FTPS and HTTPS.
4
5
▶ Wide range of rated current: 5A – 1600A
▶ Accuracy class 0.2S / 0.5S / 1.0 class
under IEC 61869-2, 0.3 / 0.6 / 1.2 class
under IEEE/ANSI C57.13
▶ UL 61010-1 Listed – CAT IV 600V
Pollution degree 3 (Altitude 3000m)
- First certified product above specs
in the world
6
For AC current: JPS series
7
▶ Using hall element to enable for AC or DC
current measuring
▶ JPS-XXX-NH is available for precise
measuring without DC influence and
harmonics for AC power quality monitoring
▶ JHAO-XXXXSD is using for high current,
especially DC power metering
For AC/DC current: JPS-XXX-NH series,
JHAO-XXXXSD series
• J&D launched JAGUAR IoT brand for power
quality and energy saving.
Make “IoT” solution via LTE Cat.M1
communication – customers can see the
data even through cell phone.
• On May 31, JAGUAR IoT has been
introduced at Korean Seminar, and has
been noticed including PQ3 series.
8
Korean Seminar
9
PQ3 series will be
announced as power
quality monitoring
solution for KEPCO Energy
market platform 4.0 in
October 2018
10
• PQ3 series is optimized for UPS, PV energy, ESS and Power quality monitoring market – Now
starting to grow its share in the market
• DC1500V and DC3000A is popular spec for ESS (Energy storage systems) application in Korea
• PQ3 will be installed with JHAO-XXXXSD / JPS-XXX-NH series into SAMSUNG and LSIS.
Power quality will be the most important
factor for Korean Microgrid especially for
EV charging, PV Energy, Inverter, etc.
11
For power quality monitoring, PQ3 series
+ JPS-XXX-NH series would be the best
solution – JPS-XXX-NH series is free
from DC tolerance.
▶Korean government will support
Electric vehicle industry, EV charging
system will be supported as well.
▶DC Microgrid will be growing,
connected to PV Energy, Battery and
Inverter/motor monitoring, etc.
• Be together for Data center / PV energy /
PCS / Battery / ESS / UPS / Inverter...... PQ3
series with PQ-CT series will be the market
leader
▶ 2017 metering issue:
http://hqsensing.com/news/jps-series-
delivers-the-best-certified-power-analysis-
in-combination-with-pqube-3e/
12
13