PLASMA PROF 162 - PlantMiner · 952 The PLASMA PROF 162 is a constant, ... P Distance between power...
8
www.cebora.com 162 PLASMA PROF 162
Transcript of PLASMA PROF 162 - PlantMiner · 952 The PLASMA PROF 162 is a constant, ... P Distance between power...
www.cebora.com
162PLASMA PROF 162
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
162PLASMA PROF 162 ARCCONTROL
“CHOPPER” PLASMA CUTTING POWERSOURCE.HIGH FREQUENCY IGNITION
ART. 952 TECHNICAL SPECIFICATIONS
220/230-380/400V415/440V 50/60 Hz THREE PHASE INPUT
22 KW MAX. INSTALLED POWER
27 KVA 40% 22 KVA 60%16 KVA 100% INPUT POWER
20 ÷ 90A 20 ÷ 160A CURRENT RANGE
160A 35% 120A 60% 95A 100% DUTY CYCLE 10 min. cycle, 40°C according to EN 60974.1
ELECTRONIC STEPLESS REGULATION
40 mm (1”2/3) MAX. THICKNESS ON STEEL
220 lt/min max - 5 bar AIR CONSUMPTION
IP 21 C PROTECTION CLASS
144 Kg NET WEIGHT
450x775x875H DIMENSIONS
ART. DESCRIPTION
952 The PLASMA PROF 162 is a constant, direct current power source developed using “secondary-circuit Chopper” technology, with microprocessor-controlled cutting parameters and functions. Automatic High Voltage / Frequency pilot arc striking reduces disturbances during start-up to a minimum. The power source is capable of recognizing the type of torch connected, and automatically setting the appropriate safety devices. This takes place solely when ORIGINAL CEBORA TORCHES are used. The power source is unable to work with other torches. The area provided at the back of the machine to house the torch cooling unit allows the creation of a compact system. Using the optional interface Art. 197, it is possible for the pantograph computer to remotely control:- arc striking. - comes with power source and 6 m. work return lead and clamp.- arc voltage, (max. 10 VDC). - arc transfer, with adjustable delay from 0 to 2 seconds. - without torch. (please choose correct torch for application). - digital or isolated analog cutting current setting.
1226 CEBORA CP160 MAR hand torch with central adaptor. 6 m. long (18 ft.).
1226.20 CEBORA CP160 MAR hand torch with central adaptor. 12 m. long (36 ft.).
1228 CEBORA CP160 DAR torch for profile machine with central adaptor. 6 m. long (18 ft.). Shielded.
1228.20 CEBORA CP160 DAR torch for profile machine with central adaptor. 12 m. long (36 ft.). Shielded.
1214 CEBORA CP91 MAR hand torch with central adaptor. 6 m. long (18 ft.).
1214.20 CEBORA CP91 MAR hand torch with central adaptor. 12 m. long (36 ft.).
1218.50 CEBORA CP90 DAR torch for profile machine with central adaptor. 6 m. long (18 ft.). Shielded.
1218.90 CEBORA CP90 DAR torch for profile machine with central adaptor. 12 m. long (36 ft.). Shielded.
1232 CEBORA CP200 MAC water cooled hand torch with central adaptor. 6 m. long (18 ft.).
1232.10 CEBORA CP200 MAC water cooled hand torch with central adaptor. 9 m. long (27 ft.).
1234 CEBORA CP200 DAC water cooled torch for profile machine with central adaptor. 6 m. long (18 ft.). Shielded.
S
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
162PLASMA PROF 162 ARCCONTROL
1234.10 CEBORA CP200 DAC water cooled torch for profile machine with central adaptor. 9 m. long (27 ft.). Shielded.
482 Ignition unit HV 16 for use with pantographs.
197 Interface: Start/Arc - On/Arc - Arc/Voltage - AN/Input - Digital input.
1235 CEBORA CP200 DAC water cooled torch for profile machine with central adaptor. 4 m. long (12 ft.). Shielded. For HV 16. unit (Art. 482).
1194 12 m. extension lead between power source (Art. 952) and HV 16 unit (Art. 482).
1194.10 18 m. extension lead between power source (Art. 952) and HV 16 unit (Art. 482).
1339 GRP51 Torch cooling unit. Single phase input 230V - 50/60Hz.
138 Cooling unit hose kit.
1542 CEBORA CP160 Plasma cutting guide wheels only.
2061 CEBORA CP160 Plasma cutting guide kit complete.
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
POS. DESCRIPTION
A Main power switch.
B Main power lamp.
C Torch fitting.
D Safety protection.
E Mass terminal.
F Pressure gauge.
G Pressure adjustment knob.
H Gas supply fitting.
I Water trap.
J Power cord.
K Interface connector.
L Cooling unit power socket.
M Fuse.
N Cooling unit connector.
O Cooling unit fastening points.
P Distance between power source and cutting point.
POS. DESCRIPTION
Q Gas intake pressure.
R LEDs indicating the type of torch connected.
S LED indicating the connection (Art. 1194 or 1194.10) plus the HV-16 unit (Art. 482) plus the torch CP200 (Art. 1235).
T LED indicating that socket N is live.
U LED indicating that the coding unit is off, the water circuit pressure is too low, or that connector P is not connected.
V Display showing the cutting current value or error codes.
W Display showing the the hole diameter of the recommended gas nozzle.
X Knob to adjust the cutting current.
Y LED indicating that the gas pressure is too low.
Z LED indicating that the thermostat is tripped.
AA LED indicating that the machine is blocked for safety reasons.
AB LED indicating no electrode.
PLASMA PROF 162 ARCCONTROL
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
162PLASMA PROF 162 ARCCONTROL
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
ART. DESCRIPTION
13819713391234
1234.10
Configuration for automatic use, with water-cooled torch. By adding Art. 197, it is possible to interface the machine with the pantograph computer
Art. 138 Art. 197 Art. 1339
Art. 1234 (6 m)Art. 1234.10 (9 m)
ART. DESCRIPTION
12261226.20
Configuration for manual use, with air-cooled torch.
Art. 1226 (6 m)Art. 1226.20 (12 m)
ART. DESCRIPTION
12281228.20
197
Configuration for automatic use, with air-cooled torch. By adding Art. 197, it is possible to interface the machine with the pantograph computer.
Art. 1228 (6 m)Art. 1228.20 (12 m)
Art. 197
PLASMA PROF 162 ARCCONTROL
http://www.cebora.com JULY08SPECS MAY CHANGE WITHOUT PRIOR NOTICE
2 Hollylea Road, Leumeah, NSW, Australia 2560, Phone: 1800 CEBORA 1800 232 672
Art. 138 Art. 197 Art. 1339
ART. DESCRIPTION
13813391232
1232.10
Configuration for manual use, with water-cooled torch.
Art. 1339 Art. 1232 (6 m)Art. 1232.10 (9 m)
ART. DESCRIPTION
19713813391194
1194.104821235
Configuration for automatic use at distances greater than 9 m, with water-cooled torch. By adding Art. 197, it is possible to interface the machine with the pantograph computer.
Art. 1194 (12 m)Art. 1194.10 (18 m)
Art. 482 Art. 1235 (4 m)
Art. 138
162PLASMA PROF 162 ARCCONTROL
www.cebora.com
CP 160 Art. 1226 - 1226.20 - 1228 - 1228.20
FIG. ART. DESCRIPTION
1 1376 Electrode. Package with 5 pcs.
2 1377 Swirl-ring.
3 1509 Extractor for Swirl-ring.
4 1371 ø 1.1 mm nozzle. Package with 5 pcs.
4 1372 ø 1.3 mm nozzle. Package with 5 pcs.
4 1373 ø 1.6 mm nozzle. Package with 5 pcs.
4 1374 ø 1.8 mm nozzle. Package with 5 pcs.
4 1375 ø 3 mm nozzle for gouging. Package with 5 pcs.
5 1398 O-Ring. Package with 5 pcs.
6 1378 Brass diffuser. Package with 5 pcs.
7 1902 Nozzle holder. Suitable for gouging too.
8 1386 Spacing spring. Package with 5 pcs.
9 1408 Spacing bush with 2 points. Package with 3 pcs.
10 1353 Body for hand torch.
11 1354 Body for profile machine torch.
2061 CEBORA CP160 Plasma cutting guide kit complete.
1542 CEBORA CP160 Plasma cutting guide wheels only.
ACCESSORIES AND CONSUMABLES
Distributed by:
