MICROCONTROLLERM.M. Tizoc Huitzilihuitl García Ramírez

UNIT 1PIC16F877A RESEARCH

ALUMNO: Juan Carlos González Alejandre

Cd. Acuña, Coahuila 31 de Agosto del 2015

1

Where is it used?

It is virtually the heart of a project because of the, you can check different speeds and accelerations of a motor. It is used in the motor control.

How much is the cost?Its price is around 6 dollar depending on what you want to program the device

What do you need to use it? software? programmer?You need 4 steps: Edit: Writing down instructions in a language either in Basic etc. Compile: Translate the machine language Burning the PIC: Record the program in the PIC with a chip card and a software Test program: Put the PIC into a breadboard, wired with leds or with whatever is going to use and ready

AdvantagesRISC CPU high-performanceDirect Addressing,indirect and relativeUp to 20Mhz speed, very efficient control for instructions and to control algorithmsProgrammable storage

DisadvantagesOnly 35 instructions to learnReduced Instruction Set

Review of project

With this PIC what I like power use is a project in which this device is programmed to detect the temperature of a charger a cell for example, because today there are too short circuits due to left by chargers connected long time and these are damaged, so serious is that the embers PIC programmed to detect this to moment temperature limit of the charger is interrupted the network where it is connected in a while in which the charger is cooled. Another serious than in a car for example, to detect some alcohol in the car this car will automatically turn it off to avoid a car accident.

2

Referenceswww.electronicaestudio.com/docs/02_programar.pdfhttp://picmicrocontroller877.blogspot.mx/2007/08/detalles-de-las-caracteristicas-i.htmlhttp://www.monografias.com/trabajos18/descripcion-pic/descripcion-pic.shtml

3