Petroleum Br Overveiw
-
Upload
rivaldo-vieira-santos -
Category
Documents
-
view
7 -
download
0
Transcript of Petroleum Br Overveiw
-
Petroleum Systems of Brazil
www.pgt.com.br
Petroleum Systems of Brazil
PGT - Petroleum Geoscience Technology
www.pgt.com.br
-
Petroleum Systems of Brazil
www.pgt.com.br
-
Petroleum Systems of Brazil
www.pgt.com.br
Introduction
Brazil has the largest sedimentary area of South America, with about 24 Phanerozoic sedimentary basins with potential interest for petroleum exploration. Covering over 5,000,000km2, this sedimentary area includes basins with significant volumes of
petroleum and commercial hydrocarbon production (Campos, Potiguar, Recncavo, Sergipe-Alagoas, Solimes, Cear, Esprito Santo, and Santos), basins with minor accumulations and/or subcommercial fields (Foz do Amazonas/Par-Maranho, Tucano,
Camamu-Almada, Cumuruxatiba, Barreirinhas, Amazonas, Paran, Jequitinhonha, and Parnaba), and basins with insignificant hydrocarbon shows or even without reliable
evidences of petroleum (Acre, Pelotas, Tacutu, Jatob, Jacupe, Maraj, and Paraba-
Pernambuco). Roughly, 27 major petroleum systems can be recognized in the 17
sedimentary basins of the first two groups (see map bellow).
-
Petroleum Systems of Brazil
www.pgt.com.br
Source Rocks
A set of 8 major distinct hydrocarbon source systems can be recognized in the 27
petroleum systems of Brazil:
Upper Devonian marine source system. This system is composed by marine
epicontinental black shales, mostly of Frasnian age. Such rocks account for the entire
oil and gas reserves of the Solimes Basin, the minor oil and gas accumulations of the Amazonas and Parnaba basins, and the gas shows and subcommercial (?) fields of the
Paran Basin.
Upper Permian marine source system. This system is composed by marine hypersaline
organic-rich shales and marls that sourced the oil shows and tar sands occurrences of the Paran Basin.
Neocomian lacustrine source system. This system is composed by Neocomian
rift lacustrine fresh/brackish shales that occur along most of the eastern/northeastern Brazilian Margin. Such rocks generated the oil and gas reserves of the Recncavo Basin,
the small oil and gas fields of the Tucano, Cumuruxatiba and Camamu-Almada basins,
and part of the fields of the Sergipe-Alagoas, Potiguar, and Cear basins.
Barremian lacustrine source system. This system is composed by Barremian rift
lacustrine brackish/saline shales that occur mainly along the eastern Brazilian Margin.
Such rocks generated the huge oil and gas reserves of the Campos Basin, most of the oil and gas fields of the Esprito Santo Basin, and a few, but significant, oil fields in the
Santos Basin.
Aptian marine source system. This system is composed by marine hypersaline shales
associated to the evaporitic sequence. Such rocks occur along most of the eastern/northeastern Brazilian Margin, being the most important source of the oil and gas reserves
of the Cear, Potiguar, and Sergipe-Alagoas basins, and the minor accumulations of the Barreirinhas Basin.
Albian marine source system. This system is composed by Albian marine carbonate
shales and marls. Although found along most of the Brazilian Atlantic Margin, such
rocks account only for small accumulations in the Foz do Amazonas/Par-Maranho,
Jequitinhonha, and Cumuruxatiba basins.
-
Petroleum Systems of Brazil
www.pgt.com.br
Cenomanian/Turonian marine source system. This system is composed by marine
anoxic shales and marls mostly of Cenomanian/Turonian age. As the previous system,
even though found along most of the Brazilian Margin, such rocks account only for some
oil and gas fields in the Santos, Esprito Santo Basin, and Sergipe-Alagoas basins.
Tertiary marine source system. This system is composed by marine deltaic shales
(Eocene/Oligocene?) which account for the gas and light oil accumulations found in the Foz do Amazonas/Par-Maranho and Esprito Santo basins.
Reservoir and Seal Rocks
Eleven major reservoir/seal sequences ranging from the Devonian to the Miocene can
be recognized in the Brazilian petroleum systems:
Devonian. This sequence comprises marine sandstone reservoirs sealed by marine
shales and diamictites of the same age. So far, only several oil and gas shows, and a few hydrocarbon occurrences were found in this sequence in the Amazonas, Parnaba, Paran and Solimes basins.
Carboniferous. Such reservoirs occur throughout the Paleozoic basins, showing good to excelent porosity and permeability characteristics, being sealed by pelitic rocks in the Paran and Parnaba basins, and by evaporites (carbonate, anhydrite and halite) in the Amazonas and Solimes basins. Practically all the oil and gas reserves of the Solimes Basin were found within Carboniferous reservoirs.
The pie diagram to the left shows the distribution of petroleum reserves (oil equivalent in place) according to its source. Regarding the marginal basins, practically all the petroleum was generated by pre-salt source rocks (Neocomian and Barremian rifts, and Aptian marine source systems). The remarkable contribution (73%) of the Barremian rift source system is due to the huge volumes of petroleum of the Campos Basin.
-
Petroleum Systems of Brazil
www.pgt.com.br
Carboniferous/Permian. Glacial marine sandstones sealed by pelitic rocks and diabase sills represent this sequence, which is restricted to the Paran Basin.
Permian. Marine deltaic sandstones, also restricted to the Paran Basin, represent
this sequence.
Jurassic. Such reservoirs are composed by fluvial sandstones of the pre-rift sequence
in the northeastern Brazilian Margin basins. The superimposed lacustrine shales of the
rift sequence provide the seal. Such reservoirs contain most of the petroleum of the Recncavo Basin, some fields in the Sergipe-Alagoas Basin, and a small accumulation
in the Camamu-Almada Basin.
Neocomian. Fluvial-deltaic and lacustrine turbiditic sandstones sealed by lacustrine
shales represent this sequence. The most significant petroleum accumulations related
to this reservoir sequence are located in the Recncavo, Sergipe-Alagoas and Potiguar basins.
Barremian. Coquina limestones sealed by lacustrine shales represent this sequence. The most significant petroleum occurrences are located in the Campos Basin, where
there are several fields with the coquinas as the main reservoir.
Aptian. This sequence consists of fluvial to alluvial sandstones and conglomerates,
which are apparently related to the Aptian unconformity, sealed by shales and evaporites. The most representative occurrences of petroleum are found in the Sergipe-Alagoas and
Potiguar basins, and secondarily in the Esprito Santo Basin.
Albian. This sequence is represented by shallow marine carbonates with remarkable
porosity/permeability changes controlled by halokinesis. The most important petroleum
accumulations within Albian reservoirs are located in the Santos, Campos and Esprito Santo basins. This sequence also includes fluvial sandstones sealed by shales, being
the main reservoir sequence in the Potiguar Basin.
Late Cretaceous. Turbidite sandstone reservoirs sealed by marine shales occur
throughout most of the Brazilian Margin. The distribution and reservoir quality of these
reservoirs are mainly controlled by the halokinesis, presence of continental sediment source areas, sea-level changes, etc. This sequence contains huge volumes of petroleum
in the Campos and in the Santos basins.
Tertiary. This sequence comprises the most prolific reservoirs of the Brazilian Margin,
being generally represented by submarine turbidite fans sealed by marine shales. The
-
Petroleum Systems of Brazil
www.pgt.com.br
distribution and reservoir quality of such fans are controlled by sea-level changes, sediment availability (source areas), presence of retrograding canyons, and contour currents. These reservoirs contain most of the oil and gas reserves of the Campos Basin,
as well as other minor accumulations in other marginal basins, such as the Esprito Santo, Sergipe-Alagoas, Cumuruxatiba, etc.
The pie diagram to the left shows the distribution of petroleum reserves (oil equivalent in place) by the age of reservoir/seal sequence. The noticeable dominance of the Late Cretaceous and Tertiary sequences reflects the huge volumes of petroleum found in the turbidites of the Campos Basin.
Entrapment Mechanisms
A large variety of entrapment styles occur in the described petroleum systems. In the Paleozoic interior sags most of the petroleum is pooled in structural traps, mainly along anticlines related to the upthrow blocks of large reverse faults. Petroleum accumulations are also found within small stratigraphic traps, generally represented by sandstone lenses enclosed in the pelitic deposits of the Devonian sequence.
Along the Eastern Atlantic Margin, most of the petroleum found in the pre-rift and rift
sequences (Jurassic to Aptian) is pooled within structural traps, generally in the upthrown blocks of normal faults. This is the case of several oil fields in the Sergipe-Alagoas,
Recncavo, Esprito Santo and Campos basins. In the post-rift sequence, the structural traps are essentially related to halokinesis. There is a plenty of structures related to the
sliding of the Aptian salt layer and to the formation of salt domes and ridges that affected all the post-rift reservoir sequences, but mainly the Albian and the Late Cretaceous reservoirs. A significant part of the petroleum found in the Campos, Santos, and Esprito
Santo basins is trapped in that type of structure. In spite of the great importance of the structural traps in the post-rift sequence, the deep-water giant oil accumulations
-
Petroleum Systems of Brazil
www.pgt.com.br
discovered in the Campos Basin are pooled within stratigraphic or structural-stratigraphic traps composed of large turbidite fans. Other stratigraphic accumulations related to turbidites and/or canyons also occur in the Sergipe-Alagoas, Esprito Santo, and Potiguar basins. Remarkable paleogeomorphic traps related to regional unconformities (mainly of Aptian and Cenomanian/ Turonian age) and to canyons are also found in the Campos,
Esprito Santo, and Sergipe-Alagoas basins.
Finally, along the Equatorial Atlantic Margin, despite the abundance of structures related
to wrench tectonics, most of the petroleum found in the rift sequence of the Potiguar and Cear (Munda) basins is pooled within structural traps, generally composed of tilted
faulted blocks. Another relevant petroleum entrapment mechanism in the Potiguar Basin is the warping and/or differential compaction of the post-rift sediments over the basement highs and upthrown blocks of faulted zones. Finally, the Amazonas Cone exhibits large
gravity sliding structures, including growth-faults and shale diapirs.
Petroleum Generation and Migration
The Paleozoic and the Mesozoic/Cenozoic sedimentary basins had distinct petroleum
generation and migration histories. In the Paleozoic intracratonic basins, maturation data indicate that the heat effect of the Mesozoic igneous events has strongly affected
the thermal evolution of both the source rocks and the hydrocarbon accumulations. Since the Paleozoic burial history of the Devonian source rocks was just enough to start
petroleum generation in most of those basins, the heat effect of the igneous intrusions (in the Solimes, Parnaba, Amazonas and Paran basins) as well as the overburden of lava flows (in the Paran Basin) account for the expulsion of most of the petroleum from
the source rocks and for the cracking of the already trapped hydrocarbons. Regarding petroleum migration, the major faults and mainly the regional carrier beds have played
an important role in secondary migration.
In the Atlantic margin, The thermal evolution of the Mesozoic/Cenozoic sediments was
controlled by interplay of burial and heat flow histories. The maturation history of the
Neocomian lacustrine source rocks was strongly affected by the burial history and high heat flows associated with the rifting event. Thus, the petroleum generation starts still in
the rift phase, continuing during the other phases of the basin evolution until the early
-
Petroleum Systems of Brazil
www.pgt.com.br
drift phase. The petroleum generated by the Neocomian source rocks reached the pre-
rift (Eastern basins) and rift reservoirs via (1) the lateral contact of source rocks with
basement horsts and upthrown blocks of normal faults, (2) via the lateral contact with the lacustrine turbidites sandstone bodies, and (3) via listric faults on the flanks of shale
diapirs.
The thermal evolution of the Barremian lacustrine and the Aptian marine source rocks
was not only affected by basement high heat flows at the end of the rift phase but also by
the subsidence history of the drift sequence. Roughly, the petroleum generation started during or by the end of the Cretaceous in the areas where the Aptian/Maastrichtian
section was thicker than the Tertiary section, while generation started during the Tertiary
in areas where the Aptian/Maastrichtian section was notably thinner. A good example
is given by the Campos Basin, where in the shallow water/slope areas, the Barremian source rocks have reached the oil window during the Late Tertiary, and by the Esprito
Santo Basin, where the same age source rocks reached the oil window earlier, during the Late Cretaceous.
With regard to the migration models, the petroleum generated by Barremian source rocks migrated into the rift reservoirs through lateral contacts, unconformities and faults, and to the Aptian reservoirs via direct contacts, faults and medium/long distance lateral migration along carrier beds. The oil that accumulated in the reservoirs of the drift
sequence of the Eastern basins occurred via salt-windows associated with extensional faults to reach the young reservoirs; and, in the Equatorial basins the hydrocarbon migrated only via unconformities and extensional faults.
Finally, the maturity history of the Albian, Late Cretaceous and Tertiary marine source
rocks was essentially affected by the subsidence history of the overburden rocks. Therefore, depending on the basin, the timing of petroleum generation may vary from
the Late Cretaceous to Recent. Similarly to what was discussed above for older source rocks, the timing of petroleum generation of these younger source rocks generally starts during the Late Cretaceous or by the end of Cretaceous in the areas where the Upper Cretaceous section is significantly thicker than the Tertiary section, while the generation
starts in the Tertiary in areas where the Upper Cretaceous is thinner. The hydrocarbon
generated by these younger source rocks reached the reservoirs via extensional faults related to salt and/or shale-induced structures.