Passive Devices Product Selection Guide - AVW · Passive Devices Product Selection Guide Optimize...
Transcript of Passive Devices Product Selection Guide - AVW · Passive Devices Product Selection Guide Optimize...
Passive Devices
Product Selection Guide
Optimize in-building wireless network designs
with Andrew’s passive RF products
CA-101761-EN.qxd 12/13/06 11:14 AM Page a
1
No matter what the customer challenge, Andrew can build the solution to
help you meet it head-on, with innovative technology that delivers a fast return
on investment, setting the stage for ongoing revenues.
Front End Capacity SolutionsMaximum Flexibility
Whether the need is to make more efficient
use of existing capacity or cost-effectively
create new capacity, Andrew, with the most
complete line in the industry, has a solution
for every budget.
RF Enhancers/Repeater Products
Andrew offers a complete line of high quality
low, medium and high power repeaters, from
10 mW to 40 W, allowing you to optimize
for any in building application.
Our miniRepeater series can be deployed in
any scenario where small and medium sized
rooms, halls, and parking lots need a boost
in coverage and signal quality or data rate
for several segments or bands.
The AMR 8/9/19 series is a multiband
repeater with up to 3 frequency bands and
2 sub-bands per frequency band. The AMR
repeater family improves indoor coverage
and allows higher data rate connectivity for
indoor coverage areas between 25,000 ft2
and 150,000 ft2.
RF Enhancers/Node-X Products
Our family of revolutionary Node-X products
feature Andrew’s proprietary ICE technology
which cancels interference and allows you to
run the nodes at full power without fear of
oscillation. Node-X products include Node-C
for CDMA carriers, Node-M for UMTS
carriers, and Node-G for GSM carriers. All
Node-X products have digital filtering and
auto set-up functionality.
Coverage SolutionsScalable and Future-proof
Andrew is the only full line manufacturer
of both passive and active distributed
antenna systems, ensuring that you can
deploy the most effective—and cost-effective
—solution possible for any application.
Intelligent Optical Network (ION™)
The Andrew Intelligent Optical Network
is an industry-leading optical distribution
system that covers a full range of power
levels, sending signals loss-free at distances
ranging from 100 m to 20 km. ION™-B
products are suitable for most indoor
structures, while the robust ION™-M
solution can handle nearly any indoor or
outdoor environment. Our optical networks
provide the bandwidth to meet future
broadband data rates.
RADIAX® Radiating Cables
Passive RADIAX radiating coaxial cables
provide uniform distribution of signal power
along the entire cable length, making it
ideal for use in tunnels and other confined
or highly obstructed spaces. Each cable
can distribute multiple services, creating
seamless, cost-effective wireless coverage
virtually anywhere.
The Andrew Corporation Offers Diverse
1
CA-101761-EN.qxd 12/13/06 11:14 AM Page 1
Andrew now offers a complete Product Selection Guidethat incorporates our family of Andrew Passive Devices
Achieve balance between the antenna and the base station with Andrew
Corporation’s passive devices.
Potentially, the wireless explosion is great news for you, the operator, with rapidly increasing
customer use of data and voice services holding the promise of record revenues on an ongoing
basis. However, as customers use their handheld wireless devices, wireless laptops, and cell
phones more than ever before, the existence of inconsistent coverage areas and dead zones
within buildings and across campuses also becomes more apparent than ever before. This inhibits
the potential for maximum usage—and limits potential revenue growth.
You’ve seen the results—reduced ROI, customer complaints, and endless churn as customers seek
higher quality voice and data services. And now, with accelerating investment in 3G networks
delivering an even greater variety of user-based services, the gap between potential and reality
is threatening to become even wider still.
Andrew Corporation now offers, with a well-engineered design, a balance
between the antenna and the base station with our line of passive devices products.
Andrew can provide you with a wide range of scalable coverage and capacity
solutions ensuring consistent quality and one-stop convenience and efficiencies.
We can help you meet the needs of every customer, no matter what their industry,
their particular budgetary scenario, or their logistical footprint, from small buildings
to giant convention centers to corporate campuses or anything in between. And,
we can help you select and deliver a technologically rigorous solution that provides
a fast return on your investment, generating maximum revenues going forward.
Solutions for Your Diverse Challenges
2
CA-101761-EN.qxd 12/13/06 11:14 AM Page 2
When it comes to in-building engineering
designs, Andrew understands your challenges
are numerous. Andrew offers our line of
passive devices to improve your in-building
coverage issues.
The application example shown offers an indoor footprint solution using Andrew’s passive devices.
1 Cell-Max™ Omni-directional In-building AntennaUnique compact multiband design allows coverage for awide range of frequencies.
2 Low Power SplitterThis well designed product evenly splits low-power cellular signals with minimal reflections or loss and allows for simple wall mounting.
3 Directional Coupler/Unequal SplitterCouples a defined fraction of a high-power cellular signal with minimal reflection or loss and allows for simple wall mounting.
4 Cell-Max™ Directional In-building AntennaCompact and visually unobtrusive, this antenna contains an integral low-loss coaxial cable pigtail eliminating connectors, reducing overall costs and losses associated with connector junctions.
5 High Power SplitterThe reactive design of this high-power splitter employs no resistors, eliminating their contribution to passive intermodulation (PIM) and potential damage.
6 Hybrid CouplerThe 3 dB hybrid coupler combines two wireless carriers to a single antenna feed or cable, while maximizing isolation in the wireless bands and minimizing PIM.
3
CA-101761-EN.qxd 12/13/06 11:14 AM Page 3
Cell-Max™ Omni-directional/Directional In-building Antennas
Specifications Part Numbers
CELLMAX–0–25 CELLMAX–D–25 CELLMAX–D–CPUS CELLMAX–O–WLAN
Frequency Range (MHz) 806–960/1710–2500 806–960/1710–2200 824–960/1710–2500 806–960/1710–2500
VSWR 1.6:1 1.8:1 1.5:1 1.7:1
Gain (dBi) 3 7 7 3
Maximum Input Power (watts) 50
Polarization Vertical
Azimuth Beamwidth 360° omni-directional 70° nominal 85° nominal 360º omni-directional
Impedance (ohms) 50
Temperature Range (C) –40° to +60° –40° to +60° –30° to +70° ––40° to +60°
Humidity (%) Up to 100
Connectors N Female N Female N Female RP TNC Male
Pigtail Cable RG58, plenum rated
Pigtail Length, mm (in) 254 (10) 300 (12) 350 (14) 812 (32)
Radome Color White
Mounting Thru-hole ceiling mount 4-hole wall mounting plate 4-hole wall mounting plate Thru-hole ceiling mount
(optional) and hardware included and hardware included (optional)
Bracket Part Number 7543994 included included 7543994
Dimensions, mm (in) 85 x 165 (3.3 x 6.5) 210 x 180 x 44 (8.3 x 7.1 x1.7) 203 x 156 x 46 (8.0 x 6.1 x 1.8) 165 x 85 (6.5 x 3.3)
Weight, kg (lb) 0.3 (0.7) 0.6 (1.4) 0.5 (1.1) 0.35 (0.7)
Andrew’s Cell-Max™ series of in-building antennas are a uniquely effective and unobtrusive solution to enhancingyour in-building wireless coverage. Cell-Max antennas feature a multiband design that allows a wide range of frequencies to be covered by one small antenna. Createdprimarily for office environments, Cell-Max antennas arealso ideally suited for parking garages, airports, shoppingmalls, and other difficult coverage areas. Designed for simple installation and minimal visual impact, Cell-Maxantennas support both existing and future wireless applications, including 3G, 802.11g, and 802.11b wireless LAN. An integral low-loss coaxial cable pigtail eliminates connectors, reducing overall system cost as well as thelosses associated with connector junctions. By combining Cell-Max antennas with other in-building products such as the ION™–B fiber optic distributed antenna system, indoorrepeaters, RADIAX® radiating cables, coaxial cable taps,power dividers, and couplers, Andrew can provide a complete solution to your internal wireless coverage needs.
CELLMAX–D–25/CPUS
CELLMAX–0–25/WLAN
Wall Mounting Configuration
030
60
90
120
150180
210
240
270
300
330
0dB-40 -30 -20 -10
030
60
90
120
150180
210
240
270
300
330
0dB-40 -30 -20 -10
Azimuth PatternCELLMAX–D–CPUS
Azimuth PatternCELLMAX–D–25
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 4
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 4
5 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
Multiband Low Power Splitters
Multiband Low Power SplittersAndrew’s multiband, low-power splitters are designed to evenly split low power RF signals with minimal reflections or loss. The wide frequency range allows use with single or multiband antennas and radiatingcable systems. The multiband frequency range includesSMR/Cellular, PCS, and UMTS. The multiband splittersare designed for indoor/outdoor (IP65) use.
• 50 watt average power rating
• Minimal RF insertion loss
• High reliability
• N Female connectors
• Low cost designs for ease of mounting to pole or wall
S–2–CPUS–L–N S–4–CPUS–L–N S–3–TC–L–N
300–960 MHz—N Connectors
S–3–CPUS–L–N S–2–TC–L–N S–4–TC–L–N
114
147
173
30
30
30
22
137
Ø4.5
137
127
800–2500 MHz—N Connectors
S–2–CPUS–L–N
S–4–CPUS–L–N
S–3–TC–L–NS–3–CPUS–L–N
S–2–TC–L–N
S–4–TC–L–N
Specifications Multiband Part Numbers
S–2–CPUS–L–N S–3–CPUS–L–N S–4–CPUS–L–N S–2–TC–L–N S–3–TC–L–N S–4–TC–L–N
Frequency Range (MHz) 800–2500 300–960
VSWR 1.2:1 1.35:1
Split Loss (dB nominal) 3 4.8 6 3 4.8 6
Dissipative Loss (dB nominal) 0.3 0.5 0.4 0.3 0.5 0.5
Power Rating (watts) Splitting: 50/Combining: 0.5 Splitting: 100/Combining: 0.5
Isolation (dB minimum) 20 20
Passive Intermodulation, PIM –110 dBc @ 2 x 43 dBm inputs –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50 50
Temperature Range (C) –35° to +75° –35° to +75°
Relative Humidity (%) 0 to 95 0 to 95
Applications Indoor/Outdoor, IP65 rating Indoor/Outdoor, IP65 rating
Connectors N Female N Female
Connector Finish Inner layer—Silver plate/Outer layer —Cu-Sn-Zn plate Inner layer—Silver plate/Outer layer —Cu-Sn-Zn plate
Housing Finish Black powder paint Black powder paint
Bracket Part Number 7543492 7543459 7543459 7543459 7543490 7543963
Weight, g (oz) 260 (9.1) 440 (15.5) 610 (21.5) 320 (11.28) 620 (21.9) 800 (28.2)
illustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 5
Directional Coupler/Unequal Splitters
These directional couplers support indoor applications in the 900 MHz cellular/GSM, the PCS/DCS–1800 band, andthe 3G band to 2500 MHz. Each unit couples a definedfraction of a high power cellular signal with minimal reflectionsor loss. The wide frequency range allows use with multibandantennas, radiating cable systems, and in wireless base stations.
The dissipative loss is minimized and reliability enhanced.Each directional coupler is supplied with mounting hardwarefor simple attachment to a wall or pole.
• Multiband frequency coverage
• Minimal RF insertion loss
• Rugged, high reliability
• Low passive intermodulation (PIM)
• 200 watt average main line power
C–x–CPUS–N
Ø4.5
14.5
47
80105140.6
54.8
23
37
800–2500 MHz—N Connectors
Specifications Part Numbers
C–6–CPUS–N C–8–CPUS–N C–10–CPUS–N C–13–CPUS–N C–15–CPUS–N C–20–CPUS–N C–30–CPUS–N
Frequency Range (MHz) 800–2500
VSWR 1.2:1
Insertion Loss (dB) 1.5 1.1 0.7 0.5 0.4 0.2 0.2
Coupling (800–2500 MHz) 6 ± 0.8 dB 8 ± 1.0 dB 10 ± 1.0 dB 13 ± 1.0 dB 15 ± 1.0 dB 20 ± 1.0 dB 30 ± 1.0 dB
Power Handling (watts) 200
Max. Reflected Power, Through Port (watts) 40 70 100 200 200 200 200
Isolation (Minimal dB) 20
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543493
Weight, g (oz) 315 (11.1) 315 (11.1) 315 (11.1) 315 (11.1) 315 (11.1) 315 (11.1) 350 (12.30)
C–6,8,10,13,15,20–CPUS–N
C–30–CPUS–N
3723
54.8
147.611280
47
14.5
Ø4.5
C–30–CPUS–Nillustration measurements are represented in millimeters
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 6
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 6
7 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
Directional Coupler/Unequal Splitters
These directional couplers support indoor applications in the 900 MHz cellular/GSM, the PCS/DCS–1800 band, andthe 3G band to 2500 MHz. Each unit couples a definedfraction of a high power cellular signal with minimal reflectionsor loss. The wide frequency range allows use with multibandantennas, radiating cable systems, and in wireless base stations.
The dissipative loss is minimized and reliability enhanced.Each directional coupler is supplied with mounting hardwarefor simple attachment to a wall or pole.
• Multiband frequency coverage
• Minimal RF insertion loss
• Rugged, high reliability
• Low passive intermodulation (PIM)
• 200 watt average main line power
C–x–CPUS–DØ5.5
35.6
112
44
155.436
65.7
800–2500 MHz—DIN Connectors
Specifications Part Number
C–6–CPUS–D C–10–CPUS–D
Frequency Range (MHz) 800–2500
VSWR 1.2:1
Insertion Loss (dB) 1.5 0.7
Coupling (800–2500 MHz) 6 ± 0.8 dB 10 ± 1.0 dB
Power Handling (watts) 200
Max. Reflected Power, Through Port (watts) 40 100
Isolation (Minimal dB) 20
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors 7-16 DIN Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543485
Weight, g (oz) 315 (11.1) 315 (11.1)
C–6,10,–CPUS–D
illustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 7
Directional Coupler/Unequal Splitters
These directional couplers support indoor and outdoor applications in the UHF band. Each unit couples a definedfraction of a high power signal with minimal reflections orloss. The wide frequency range allows use with multibandantennas, radiating cable systems, and in wireless base stations.
The dissipative loss is minimized and reliability enhanced.Each directional coupler is supplied with mounting hardwarefor simple attachment to a wall or pole.
• Multiband frequency coverage
• Minimal RF insertion loss
• Rugged, high reliability
• Low passive intermodulation (PIM)
• 200 watt average main line power
• Indoor and outdoor applications
300–960 MHz (UHF Band)—N Connectors
C-6,10,15,20-TC-N
Specifications Part Numbers
C–6–TC–N C–10–TC–N C–15–TC–N C–20–TC–N C–30–TC–N
Frequency Range (MHz) 300–960
VSWR 1.2:1
Insertion Loss (dB) 1.7 0.8 0.6 0.5 0.4
Coupling 300–960 MHz (dB) 6 ± 1.0 10 ± 1.0 15 ± 1.0 20 ± 1.0 30 ± 1.0
Power Handling (watts) 200
Max. Reflected Power, Through Port (watts) 40 100 200 200 200
Isolation (dB Typical) 26 30 30 30 30
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 compliant
Connectors N Female
Connector Finish Inner layer—Silver plate/Outer layer —Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543458
Weight, g (oz) 400 (17.6)
C–x–TC–N
illustration measurements are represented in millimeters
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 8
C-30-TC-NC–30–TC–N
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 8
9 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
Tapper
The Andrew Tapper supports indoor applications in the 900MHz cellular/GSM band, the PCS/DCS-1800 band, andthe 3G band to 2500 MHz. Each unit couples a definedfraction of high power cellular signal with minimal reflectionsor loss. The wide frequency range allows use with multibandantenna, radiating cable systems, and in wire base stations.The dissipative loss is minimized and reliability enhanced.
• Multiband frequency coverage
• Minimal RF insertion loss
• Rugged, high reliability
• Low passive intermodulation (PIM)
• 200 watt average main line power
CC–x–CPUS–N
19
130
219.6
5-Ø3.2
25
62.6
25
125
3
10
Multiband 800–2500 MHz—N Connectors
Specifications Part Numbers
CC–6–CPUS–N CC–10–CPUS–N C–15–CPUS–N
Frequency Range (MHz) 800–2500
VSWR 1.35:1
Insertion Loss (dB) 1.7 1.1 0.7
Coupling (800–2500 MHz) 6 ± 0.8 dB 10 ± 1.0 dB 15 ± 1.0 dB
Power Handling (watts) 200
Max. Reflected Power, Through Port (watts) 40 100 200
Passive Intermodulation, PIM –150 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543458
Weight, g (oz) 370 (13) 370 (13) 370 (13)
CC–6,10,15–CPUS–Nillustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 9
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 10
High Power Splitters
The Andrew multiband, high-power splitter evenly splits high--power cellular signals with minimal reflections or loss.The reactive design employs no resistors, eliminating theircontribution to PIM and potential damage. The wide frequency range allows use with single or multiband antennas and radiating cable systems. With few solder joints and an air dielectric, loss has been minimized and reliability enhanced.
• Multiband frequency range: SMR/cellular, PCS, UMTS
• Designed for indoor and outdoor applications
• Minimal RF insertion loss
• High reliability
• N Female connectors
• Low-cost design for ease of mounting to pole or wall using the provided spring clip accessory
S–2–CPUS–H–N
800–2500 MHz—N Female Connectors
Specifications Part Numbers
S–2–CPUS–H–N S–3–CPUS–H–N S–4–CPUS–H–N
Frequency Range (MHz) 800–2500
Input VSWR 1.2:1 maximum
Split Loss (dB nominal) 3.0 4.8 6.0
Dissipative Loss (dB nominal) 0.1
Power Rating (watts) 500 300 300
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543458
Weight, g (oz) 430 (15.2) 460 (16.2) 500 (17.6)
S–3–CPUS–H–N
S–4–CPUS–H–N
193
130
5-Ø3.2
210.3
25 60.6
40125
3
25
193140
5-Ø3.2
235.6
60.6
25
40125
3
25
193
140
5-Ø3.2
25 60.6
42.8
235.6
40125
3
25
S–2–CPUS–H–N
S–3–CPUS–H–N
S–4–CPUS–H–N
illustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 10
11 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
High Power Splitters
The Andrew multiband, high-power splitter evenly splits high power cellular signals with minimal reflections or loss.The reactive design employs no resistors, eliminating theircontribution to passive intermodulation (PIM) and potentialdamage. The wide frequency range allows use with singleor multiband antennas and radiating cable systems. Withfew solder joints and an air dielectric, loss has been minimized and reliability enhanced.
• Multiband frequency range: SMR/cellular, PCS, UMTS
• Designed for indoor and outdoor applications
• Minimal RF insertion loss
• High reliability
• 7-16 DIN Female connectors
• Low-cost design for ease of mounting to pole or wall using the provided spring clip accessory
800–2500 MHz—7-16 DIN Female Connectors
Specifications Part Numbers
S–2–CPUS–H–D S–3–CPUS–H–D S–4–CPUS–H–D
Frequency Range (MHz) 800–2500
Input VSWR 1.2:1 maximum
Split Loss (dB nominal) 3.0 4.8 6.0
Dissipative Loss (dB nominal) 0.1
Power Rating (watts) 700
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors 7-16 DIN Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543458
Weight, g (oz) 1120 (39.5) 1260 (44.4) 1380 (48.7)
S–2–CPUS–H–D
S–3–CPUS–H–D
S–4–CPUS–H–D
S–2–CPUS–H–D
S–3–CPUS–H–D
S–4–CPUS–H–D
Ø5.2
28
140 5
259.4
38 82.4
60.2
50125
5
4xØ3.2
38
Ø5.2
5140
28
259.438 82.4
50125
5
4xØ3.2
38
130
Ø5.2
528
230
82.4
38
50125
54xØ3.2
38
illustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 11
High Power Splitters
The Andrew multiband, high-power splitter evenly splits high--power cellular signals with minimal reflections or loss.The reactive design employs no resistors, eliminating their contribution to PIM and potential damage. The wide frequency range allows use with single or multiband antennas and radiating cable systems. With few solder joints and an air dielectric, loss has been minimized and reliability enhanced.
• Multiband frequency range: 300–960 MHz
• Designed for indoor and outdoor applications
• Minimal RF insertion loss
• High reliability
• Low-cost design for ease of mounting to pole or wall using the provided spring clip accessory
S–2–TC–H–N
300–960 MHz—N and DIN Female Connectors
Specifications Part Numbers
S–2–TC–H–N S–2–TC–H–D
Frequency Range (MHz) 300–960
Input VSWR 1.35:1 maximum
Split Loss (dB nominal) 3.0
Dissipative Loss (dB nominal) 0.15
Power Rating (watts) 350 700
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female 7-16 DIN Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543458
Weight, g (oz) 430 (15.2) 1120 (39.5)
S–2–TC–H–D
193
130
5-Ø3.2
210.3
25 60.6
40125
3
25
234207
38 82
38163
5.2
50
28
54xØ3.2
125
S–2–TC–H–N
S–2–TC–H–D
illustration measurements are represented in millimeters
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 12
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 12
13 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
Hybrid Couplers
Andrew’s hybrid couplers are designed to meet the specific needs of the wireless market. Andrew’s hybrid couplers aremost commonly used to combine two wireless carriers to asingle antenna feed or cable. This requires the termination of one output port in 50 ohms, and results in a 3 dB loss in each signal. In situations where two similar feeds arerequired—for example in-building applications—both outputsmay be used, eliminating the need for a termination and the3 dB loss.
• Maximize isolation in the wireless bands and minimize passive intermodulation (PIM)
• 23 dB isolation (minimum), low VSWR
• Combines non-coherent signals
• 120 watt average power rating
• N Female connector or 7-16 DIN connector
• High reliability
H–3–CPUS–N
InputJ1
InputJ2
J4Output
J3Output
N and DIN Female Connectors
Configuration
Specifications Part Numbers
H–3–CPUS–N H–3–CPUS–D H–3–TC–N
Frequency Range (MHz) 800–2500 800–2500 300-960
Input VSWR 1.2:1 maximum
Coupling 3.1 ± 0.2 dB
Power Rating 120 watt average, 3 kW peak
Input Isolation (dB minimum) 23
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Frequency Sensitivity (dB) ±0.3
Impedance (ohms nominal) 50
Temperature Range (C) –35° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female 7-16 DIN Female N Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543481 7543481 7543491
Weight, g (oz) 430 (15.2) 1020 (35.9) 610 (21.5)
H–3–CPUS–D
H–3–CPUS–N
H–3–CPUS–D
H–3–TC–NH–3–TC–N
illustration measurements are represented in millimeters
All values are typical values
CA-101761-EN.qxd 12/13/06 11:14 AM Page 13
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 14
Hybrid Matrix 4x4
The Andrew multiband 4x4 High Power Hybrid Matrix combines 4 input signals into 4 output signals with minimumdissipative loss. The Hybrid Matrix has a strip line designand can be used for indoor or outdoor applications. A wide frequency range allows for use with single or multiband signal sources. The device is designed to maximize the isolation and minimize intemodulations.
• Connects 4 inputs to 4 outputs
• Multiband frequency range SMR/cellular, PCS, UMTS
• Minimal RF insertion loss
• High reliability
H–4x4–CPU-N
H–4x4–CPU-D
H–4x4–CPU-N
H–4x4–CPU-D
Specifications Part Numbers
H–4x4–CPU–N H–4x4–CPU–D
Frequency Range (MHz) 800–2200
Input VSWR 1.2:1 maximum
Coupling 6.2 ± 0.5 dB
Power Rating 60 watt average, every port
Input Isolation (dB minimum) >25
Passive Intermodulation, PIM –140 dBc @ 2 x 43 dBm inputs
Frequency Sensitivity (dB) ±0.3
Impedance (ohms nominal) 50
Temperature Range (C) –20° to +75°
Relative Humidity (%) 0 to 95
Applications Indoor/Outdoor, IP65 rating
Connectors N Female 7-16 DIN Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black powder paint
Bracket Part Number 7543490 7543489
Weight, g (oz) 1100 (60) 3100 (109)
illustration measurements are represented in millimeters
All values are typical values
N and DIN Female Connectors
CA-101761-EN.qxd 12/13/06 11:14 AM Page 14
Coaxial Loads/Terminations
This series of terminations are medium power coaxial loadswhich operate from dc to 2.5 GHz. Cooling fins minimizetemperature rise. The terminating element is enclosed withina carefully matched coaxial housing. Standard connectorsare N and 7-16 DIN male or female.
• Resistive film load
• Finned termination
• Ideal for wireless applications
• High reliability
T–10–NF
T–10–NM
T–2–NM T–25–NM
Specifications Part Numbers
T–2–NM T–2–NF T–10–NM T–10–NF T–25–NM T–25–NF
Frequency Range (GHz) DC–3.0
VSWR 1.15:1
Maximum Average Power (watts) 2 2 10 10 25 25
Peak Power (kW) 1.5
Impedance (ohms) 50
Temperature Range (C) –35° to +125°
Connectors N Male N Female N Male N Female N Male N Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black oxidization
Maximum Length, mm (in) 41 (1.61) 41 (1.61) 54 (2.126) 54 (2.126) 78 (3.07) 78 (3.07)
Diameter Maximum mm (in) 20 20 35 35 35 35
Weight, g (oz) 50 (1.8) 50 (1.8) 110 (3.9) 110 (3.9) 160 (5.6) 160 (5.6)
30
53.5
35
T–10–NM
T–10–NF
T–2–NM
Ø35
30
78
T–25–NM
53.5
Ø35
30
19.5
40.5
Ø20
15 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
T–2–NF T–25–NFT–2–NF
30
78
Ø35
T–25–NF
19.5
40.5
Ø20
illustration measurements are represented in millimeters
All values are typical values
N and DIN Male and Female Connectors
CA-101761-EN.qxd 12/13/06 11:14 AM Page 15
For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307 16
T–25–DM T–50–NFT–25–DM
136.5
32.5
Ø50
T–50–NF
36
84
Ø35
T–25–DF T–50–DMT–25–DF
139.5
35.5
Ø50
T–50–DM
82.8
34.8
35
Coaxial Loads/Terminations
T–50–NM T–50–DFT–50–NM
137.6
33.6
Ø50
T–50–DF
33
Ø50
137
illustration measurements are represented in millimeters
Specifications Part Numbers
T–25–DM T–25–DF T–50–NM T–50–NF T–50–DM T–50–DF
Frequency Range (GHz) DC–3.0
VSWR 1.15:1
Maximum Average Power (watts) 25 25 50 50 50 50
Peak Power (kW) 1.5
Impedance (ohms) 50
Temperature Range (C) –35° to +125°
Connectors 7-16 DIN Male 7-16 DIN Female N Male N Female 7-16 DIN Male 7-16 DIN Female
Connector Finish Inner layer—Silver plate/Outer layer—Cu-Sn-Zn plate
Housing Finish Black oxidization
Maximum Length, mm (in) 83 (3.27) 84 (3.30) 137 (5.39) 137 (5.39) 138 (5.43) 140 (5.51)
Diameter Maximum mm (in) 35 (1.38) 35 (1.38) 50 (1.97) 50 (1.97) 50 (1.97) 50 (1.97)
Weight, g (oz) 210 (7.4) 210 (7.4) 390 (13.7) 390 (13.7) 450 (15.8) 450 (15.8)
All values are typical values
N and DIN Male and Female Connectors
CA-101761-EN.qxd 12/13/06 11:14 AM Page 16
17 For more information, please contact: Andrew Corporation Customer Support Center: 1-800-255-1479 • International: +1-708-873-2307
Brackets
7543491
7543481
7543493 7543994
7543489
7543490
7543459
7543492 7543963
7543485
Bracket Part Numbers
Part Number 7543458 7543459 7543481 7543485 7543489 7543490 7543491 7543492 7543493 7543963 7543994
300–960 MHz
C–6–TC–N X
C–10–TC–N X
C–15–TC–N X
C–20–TC–N X
C–30–TC–N X
H–3–TC–N X
S–2–TC–H–N X
S–2–TC–H–D X
S–2–TC–L–N X
S–3–TC–L–N X
S–4–TC–L–N X
800–2500 MHz Bracket Part Numbers
C–6–CPUS–D X
C–10–CPUS–D X
C–6–CPUS–N X
C–8–CPUS–N X
C–10–CPUS–N X
C–13–CPUS–N X
C–15–CPUS–N X
C–20–CPUS–N X
C–30–CPUS–N X
CC–6–CPUS–N X
CC–10–CPUS–N X
CC–15–CPUS–N X
H–3–CPUS–D X
H–3–CPUS–N X
H–4x4–CPU–D X
H–4x4–CPU–N X
S–2–CPUS–H–D X
S–2–CPUS–H–N X
S–2–CPUS–L–N X
S–3–CPUS–H–D X
S–3–CPUS–H–N X
S–3–CPUS–L–N X
S–4–CPUS–H–D X
S–4–CPUS–H–N X
S–4–CPUS–L–N X
Antenna Bracket Part Numbers
CELLMAX–O–25 X
CELLMAX–O–WLAN X
7543458
CA-101761-EN.qxd 12/13/06 11:14 AM Page 17
18
Andrew Corporation’s Wireless Innovations Group (WIG) has more than 20 yearsof experience in the telecom market providing both products and services.
Wireless networks today are required to provide greater coverage and capacity thanever before in order to enable broadband data and multimedia services. In order tokeep up with customer demands we offer the following capabilities:
RF Design
• Site survey
• Planning coverage tools and simulations
• Up front optimization
Site Design
• Construction plans and documentation
• Subcontractor management
• General project management
Project Management
• Management of physical site and power
• Management of equipment installation
Commissioning
• Testing of the system
• Network integration
Training and Documentation
• Providing a complete package
• Updating personnel on network changes and design solutions
We understand that every customer has unique goals and requirements which are taken into account on a project by project basis. We offer our wealth of experience to you. For more information please contact our sales team.
Application Examples
Messe Zentrum—Salzburg, Austria
Exhibition Centre—Hannover/Essen/Berlin/Nürnberg, Germany
Bologna Fiera—Bologna, Italy
Blue Water Shopping Centre—United Kingdom
Ernest Morial Convention Center—New Orleans, USA
Millenium Tower—Vienna, Austria
Turnkey Coverage and Distributed Capacity Solutions
CA-101761-EN.qxd 12/13/06 11:14 AM Page 18
Customer Support CenterFrom North AmericaTelephone: 1-800-255-1479Fax: 1-800-349-5444
From North America
Telephone: +1-708-873-2307Fax: +1-708-349-5444Internet: www.andrew.com
Andrew CorporationWorldwide Headquarters3 Westbrook Corporate CenterSuite 900Westchester, IL 60154 USA
One Company. A World of Solutions.
All designs, specifications and availabilities of products and services presented in thisbulletin are subject to change without notice.
CA-101760-EN (12/06)© 2006 Andrew Corporation, Westchester, IL 60154 USA
CA-101761-EN.qxd 12/13/06 11:14 AM Page 19