Over 50 Times More Powerful Than Regular Lubricants!
-
Upload
julie-hutchinson -
Category
Documents
-
view
213 -
download
0
Transcript of Over 50 Times More Powerful Than Regular Lubricants!
Over 50 Times More Powerful Than
Regular Lubricants!
2
Xtreme Pressure
Lubricants
Supper Concentrated Fuel additives
Earth Friendly Technology
3
Environmentally Friendly
Xtreme Performanceand Environmentally Friendly!
• Plant/Vegetable-based products• Stable• Non-corrosive• Non-reportable
4
EnvironmentallyFriendly
• Reduce energy consumption
• Vegetable based
• Reduce usage of petroleum-based lubricants
• Safe for human contact
• Minimal disposability issues
• Several products are Food grade / biodegradable
EPA APPROVED
Environmental, Health & Safety
approval
NSF Food Grade certification
5
Engine LifeTreatment
Industrial Oil Concentrate
Cutting Oil
Water Soluble Cutting Fluids
Hydraulic Treatment
EP-2 Grease
Penetrating Lubricant
Motor Oil
Core Technology
Heavy Duty Oil Stabilizer
Down hole Drilling Fluid
6
Technology
Typical Lubricants
Charge - +Bonding/flowing Flowing Bonding
Reaction to heat & pressure
Migrates away Migrates towards
Film strength Limited Extraordinary
Environmentally friendly
No Yes
7
• Dramatically reduces heat & friction Reduces wear to extend equipment life Displaces moisture, prevents corrosion Lowers energy consumption Helps prevent costly down time Optimizes equipment efficiency Fewer oil changes
Bottom Line Benefits
8
Four Ball Wear Test
Wear Reduction
0.387
0.445
0.35
0.36
0.37
0.38
0.39
0.4
0.41
0.42
0.43
0.44
0.45
MOTOR OIL WITHOUT XPL+ MOTOR OIL WITH XPL+
mm
Test Method: ASTM D-4172 40kg 1 hour @ 75oCMake & Model: PTI M-4
Base Product: 5W-30 motor oil without XPL+ technologyTest product: 5W-30 motor oil with XPL+ technology
9
Four Ball Wear Test
Test Method: ASTM D-4172 40kg 1 hour @ 75oCMake & Model: PTI M-4
Base Product: 5W-30 motor oil without XPL+ technologyTest product: 5W-30 motor oil with XPL+ technology
MOTOR OIL WITHOUT XPL+
MOTOR OIL WITH XPL+
Co-efficient of Friction
104,000 P.S.I.4,000 P.S.I. 200,000 P.S.I.200,000 P.S.I.
Bearing Friction Test
Over 50 times more powerful than regular lubricants!
11
Automotive
Industrial
Lubricating Oils & GreasesU.S. Market
• $20 billion (2.9 billion gallons) in 2010 (proj.)
• Steady growth of 3-4%
Source : Business Trends Analysis
1.2 billion gallons:- Process oils (750M)- Hydraulic (200M)- Industrial engine (140M)- Metalworking (100M)- Gear oils (30M)
1.6 billion gallons:-Engine oils (1.2B)-Hydraulic, transmission, gear oils
12
Petroleum ConsumptionU.S. Market
13• Commercial – Heavy duty equipment, commercial trucking, railway & shipping fleets• Industrial – manufacturing, metalworking, mining, paper mills, drilling
Lubricants Applications
14
Priority Markets
• Transportation Sector – Heavy duty equipment, Trucking, Railway & Shipping Fleets
15
Priority Markets
• Industrial Sector – Manufacturing, Construction, Food & Beverage, Water cooling plants, Utility & Power generation plants
16
Priority Markets
• Drilling and Mining Sector -Down hole Drilling, Oil drilling and Mining operations (hard & soft)
17
Priority Markets
• International and Local Supply & Distribution Networks
» Existing supply or customer networks for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & gas)
» Existing distributors supplying to end users for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & gas)
»Auto supply and service centers, hardware, mass merchandisers & retailers
18
Application ProOne Products Anticipated Results
Machining - i.e. CNC, lathes, grinding, boring, broaching, drilling, tapping, milling, sawing, stamping, etc.
• BioStable (90%) and Synthetic (10%) Water Soluble Cutting Fluids
• ACA Cutting Oil for cutting oil applications
• Industrial Oil Concentrate
• Feeds and speeds increased anywhere from +20% up to +500% depending on application• Tool life extended by as much as 10 fold• Improved surface finishes, eliminating additional finishing steps• Sump life extended by as much as 400%• Down time reduced due to less wear, longer sump life, longer tool life• Energy reduction of 10-20%• Less oxidation and corrosion on equipment, pumps, tanks, etc.
Gear boxes • Industrial Oil Concentrate
• Multi-purpose EP-2 Grease
• Energy savings of 10-20% • Reduction in noise• Wear reduced by 50-75%• Reduction in shear factor
Conveyor systems • Multi-purpose EP-2 Grease
• XPL-101 Penetrating Lubricant
• Energy savings of 10-20%• Protection from outside elements (rust, corrosion protection)• Noise reduction
Hydraulic systems • See hydraulic systems under Diesel Powered Equipment
• See hydraulic systems under Diesel Powered Equipment
Pneumatic air-driven solenoids and air tools
• XPL-101 Penetrating Lubricant • Less downtime due to water/corrosion• Equipment working life extended up to 5 X
Manufacturing
19
Application ProOne Products Anticipated Results
Any and all diesel and gasoline engines including vehicles, generators, etc.
• Heavy Duty Oil Stabilizer
• Engine Life Treatment
• 15W-40 CJ4 Motor Oil
• Oil change intervals extended by up to 50%• Fuel consumption reduced by 5-10%• Reduced oil consumption and oil burning• Improved performance through increased compression• Longer working life due to wear reduction• Less friction, 2-10% more horsepower • More reliability and fewer breakdowns
Logging gear • Hydraulic Treatment
• Multi-purpose EP-2 Grease
• XPL-101 Penetrating Lubricant
• Extended life of drag lines and cables• Increased safety due to extended range of cables• Protection from outside elements (rust, corrosion protection)• Greater reliability, fewer breakdowns, less shop repair
Diesel-powered Equipment
20
Application ProOne Products Anticipated Results
Mud Pumps Hydraulicing slurry
• Down hole Drilling Fluid • Relieve heat, friction & wear on all parts associated with hydraulicing mud/slurry• No disposability problems •Up to 70% reduction in friction• Reduced torque• No diesel fuel added to well• Extended drill bit life• Improved thread protection on pipe sections
All oil hydraulic systems • Hydraulic Treatment
• Multi-purpose EP-2 Grease
• Electrolysis eliminated up to 94%• Electromagnetic field/static wear eliminated• Water contamination in hyd. fluid minimized• Reduction in wear, heat, friction, oxidation, corrosion & acidity • Operating life of the fluid extended 2-4 times• Seals last longer• Less downtime due to wear & tear• Energy reduced 8-15% for light load and up to 33% for heavy load• Less maintenance on all pivot points
Down hole Drilling
21
XPL-101 Penetrating Lubricant
If it rolls, rubs, slides, rusts, corrodes, seizes or collects moisture
…Use XPL-101…
The Best Liquid Tool in the Box
BOTTOM LINE BENEFITS:
• Xtreme pressure film strength • Lubricates, stops squeaks & noise• Frees sticky/rusted parts• Protects metal from rusting• Retards electrical corrosion• Displaces moisture• Non-toxic, environmentally friendly
22
Synthetic EP-1 Grease
Pumpable Syntheticfrom – 60
oF to 650
oF !
SUPERIOR PERFORMANCE:
Extreme temperature range Extreme pressure protection Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility Low oil bleed characteristics
REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption
APPLICATIONS:
Long lubricant dispensing linesExtreme hot or cold conditions
Wet and hot end use for roll neck journal bearings
Heavily loaded hinge pins, couplings, CV and universal joints
Rolling mills, slabbing millsTruck chassis, wheel bearings,
general lube points
Food
Grade
23
Multipurpose EP-2 Grease
Extreme Performancefrom – 40
oF to 615
oF !
SUPERIOR PERFORMANCE:
Load carrying ability Shear stability Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility
REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption
APPLICATIONS:
IndustrialManufacturing
CommercialMarine
AutomotiveMining
ConstructionAgricultural
Food
Grade
24
Lithium/ Moly Grease
Heavy Duty Lithium Grease With 5% Moly
SUPERIOR PERFORMANCE: Extreme pressure protection Heavy load carrying ability Good shear stability Highly resistant to water wash Rust & corrosion inhibitors Cling capability Low oil bleed characteristics Good thermal, oxidative and mechanical stability
IDEAL FOR USE:
Heavily loaded bushings, ball and roller bearings
Heavy duty truck wheel bearings & fifth wheel
Automatic lube systemsBucket pins Swing arms
Chassis pointsSliding surfaces
Turn tablesConveyorsCouplings
REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption
25
Industrial Oil Concentrate
Superior Performance for Industrial Applications
BOTTOM LINE BENEFITS:
• Extends life of gears, cams & dies• Improves speed & feed rates• Improves surface finishes• Reduces down time• Cuts down wear & tear• Less power consumption• Reduces smoke & noise• Extends machine life
APPLICATIONS
Use at 10% by total volume
Cold-heading Stamping
Slitting machines Threading
Compressors, GeneratorsPumps, Gear boxes
Heavy chains & SprocketsBall & roller bearings
26
Hydraulic Treatment
Unsurpassed Lubrication .. And Environmentally Friendly!
APPLICATIONS:
Hydraulic systems Power transmission equipment
Injection molding machines Railroad equipment
Refineries & oil field equipment Paper and pulp mills
Mining & smelter equipmentAutomatic Transmissions
Power steering unitsPumps & Rams
DILUTION RATIOS:
Hydraulic Systems: 10% by volumeWet bath clutches, brakes: 5% by volumeAutomatic transmissions: 2% by volume
BOTTOM LINE BENEFITS:
• Lowers friction & operating temperatures• Protects against wear• Reduces electrolysis• Displaces moisture• Prevents oxidation & corrosion• Helps extend equipment life• Compatible with petroleum & synthetics • Helps to protect & condition seals• Optimum run times .. less down time
27
Engine Life Treatment
Reduces Friction, Heat & Wear
BOTTOM LINE BENEFITS:
• Withstands friction & high temperatures• Protects engine from wear • Prevents oxidation & corrosion• Protects & conditions seals• Extends oil change intervals• Helps optimize engine performance • Maximizes fuel economy• Protects from wear at start-up
DIRECTIONS
For 4-6 quart capacity engines pour 12oz into motor oil crankcase.
For larger capacity engines use at 10% by total volume.
28
Heavy Duty Oil Stabilizer
If it Smokes, Burns, Leaks Oil, or Needs Extra Protection
BOTTOM LINE BENEFITS:
• Stops oil burning & oil leaks• Slows blow-by, smoking & oil contamination• Protects against wear to extend engine life• More power with better fuel economy• Provides dry start protection• Easier starting at all temperatures• Increases oil pressure• Conditions seals to extend life• Stops thermal breakdown• Quiets engines & gear boxes• Extends oil life by 50% or more
DIRECTIONS
% by volume
Regular gas engines 20% Badly worn engines 40% Diesel engines 20% Commercial/Industrial 20% Marine engines 20%
Motorcycle/Marine engines 20%4-stroke motorcycles 10%
with Wet ClutchesManual Transmissions 20%Differential & Gear Boxes 20%
29
ACA Cutting OilAir Craft Approved (ACA) for Titanium
Cuts tool wear.Cuts downtime. Cuts costs...
BOTTOM LINE BENEFITS:• Improves speed & feed rates• Reduces down time• Cuts down wear from metal removal• Improves surface finishes • Lowers power consumption• Reduces smoke & noise• Extends machine & tool life• Resistant to foaming• Corrosion resistant
For all ferrous and non-ferrous alloys
Ideal for:
• Alloy steel• Stainless steel
• Titanium• Waspalloy
• Inconel• Mild steel• Aluminum
• Copper alloys
APPLICATIONS:
Screw machinesCNC machining
Lathes Roll threading
Stamping Grinding
Gear hobbing Sawing
Slitting machines Threading
Turning VMC’s
Metalforming
Use at full-strength
30
Bio-StableWater Soluble Cutting Fluid
Earth-friendly Formula .. ROI Friendly Performance
BOTTOM LINE BENEFITS:• Increases production rates• Improves tolerances & finish• Extends tool and machine life• Reduces edge buildup, welding & tearing• Extends sump life• Biocides to control rancidity• Retards bacteria and fungus• Reduces down time• Lowers power consumption & noise• Resistant to foaming• Soft & hard water emulsification• Operator friendly – safe, no odors• No extreme hazard disposability issues
APPLICATIONS/DILUTION RATIOS
Reaming & Boring 10:1 to 15:1Drilling & Tapping 10:1 to 15:1Milling 10:1 to 15:1Turning 15:1 to 30:1Sawing 15:1 to 30:1Stamping 15:1 to 30:1Grinding 30:1 to 50:1Quenching 30:1 to 50:1
Vegetable
oil based
Biodegrada
ble
31
SyntheticWater Soluble Cutting Fluid
The Ultimate Performance to Improve your Bottom Line
BOTTOM LINE BENEFITS:• Increases speed & feed rates• Improves surface finish• Extends tool life• Reduces edge buildup, welding & tearing• Extends life of cutting solution• Retards bacteria growth• Reduces down time• Lowers power consumption• Cuts down noise• Resistant to foaming• Soft & hard water emulsification• No hazardous ingredients• No harmful vapors
APPLICATIONS/DILUTION RATIOS
Reaming & Boring 10:1 to 15:1Drilling & Tapping 10:1 to 15:1Milling 10:1 to 15:1Turning 15:1 to 30:1Sawing 15:1 to 30:1Stamping 15:1 to 30:1Grinding 30:1 to 50:1Quenching 30:1 to 50:1
Water-
based
Synthetic
Downhole Drilling &
Mining
33
Down hole Drilling Fluid
ProOne Knows the Drill
BOTTOM LINE BENEFITS:
Over 70% reduction in friction Less downtime - more production Extends drill bit life Reduces torque Lowers operating temperatures Eliminates up to 94% of electrolysis Displaces moisture
AND
Biodegradable! No diesel fuel added to well No disposability issues
34
Rock Drilling Oil
BOTTOM LINE BENEFITS:
Extreme pressure protection Reduce friction & lower operating
torque Excellent oxidation resistance High solvency characteristics Prevents sluggish valve action Protect components form running dry Environmentally friendly without lead,
Chlorine, Phosphorus or Antimony
Oil of FAME !!!
Waterless Wash & Shine
36
Waterless Wash & Shine
Cleans, Shines & Protects ...
.. Without Water .... Without Scratching ..
BOTTOM LINE BENEFITS:
• Only 15 minutes for an average car• No buckets, hose or sponge required• No mess to clean up• Citrus-based formula cleans bugs, tar,
tree sap, bird droppings, water spots• Just-waxed shiny coating beads water
for 4 weeks• For paint, chrome or glass
37
Waterless Wash & Shine
WON’T SCRATCH THE FINISH
1. Surrounds and lifts dirt
particles.
2. Wipes off dirt without
scratching
3. Leaves clean, shiny, smooth,
protected finish.
38
SPECIAL REQUESTS
Technology & Products: Technology Demo Video’s
Material Safety Data Sheets
Technology Specifications and Applications
Brochures
CONTACT US Email: [email protected]
Website: www.fullxbrands.com