ORTHOPEDIC & SURGICAL INSTRUMENTS …...2 15 20 28 39 Table of Content Retractor, Retractor System,...
Transcript of ORTHOPEDIC & SURGICAL INSTRUMENTS …...2 15 20 28 39 Table of Content Retractor, Retractor System,...
ORTHOPEDIC &SURGICAL
INSTRUMENTS
Supplemental SourceBook
215202839
Table of Content
Retractor, Retractor System, Handheld Retractor Cast-, Plaster ManagementPelvic InstrumentsWire, Pin & Rod ManagementORLOS: Instruments, Accessories, Screws,
Sets,Laminectomy RongeursRaspatories, Elevators, Curettes, Spatulas Scalpels, Knives, SawsBone FilesDynamic Hip Screw SystemOsteotomes, ChiselsCups, BowlsDiagnosticMalletsSets
49606973757779
8381
85
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 1
Retractor,Retractor Systems,
Handheld Retractors
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 2
Shoulder Retractor
06-820.00
Kolbel Retractor 8" ring handle only
Kolbel RetractorBladesblunt
width x depth06-820.68 36mm x 68mm06-820.53 36mm x 53mm06-820.36 36mm x 36mm
Helps to facilitate the introduction of deep retractors necessary forre visibility of the glenoid, acromion and rotator cuff.
06-819.18
Kolbel Soft Tissue Retractor 7"angled 2x2 blunt prongs
1/1
For opening the subacromial space
06-819.19Kolbel Soft TissueRetractor 19cm,single-pronged, straight,very fine tips
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 3
Shoulder Retractor
For retraction when using the deltopec- toral approach.
06-819.29
Kolbel Soft Tissue Retractor 19cmsingle-pronged, angled, 190 mm
06-818.17
Capsule Spreader16,5cmsingle-pronged, fine, 90° curved
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 4
Lamina Spreader
16 cm 06-121.03
17 cm 06-121.04
27 cm 06-121.00 06-121.01
INGE
CLOWARD-Vertebra, Laminectomy Retractor, 16 cm, blade opening 15 mm06-191.16
CLOWARD-Vertebra, Laminectomy Retractor, 15 cm
Blade opening06-192.15 20 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 5
Caspar Vertebral Distractor
50-416.01Caspar Vertebraldistractor, right shorttoothed bar: 110 mm
50-417.01Caspar Vertebraldistractor, right longtoothed bar: 130 mm
50-416.02Caspar Vertebraldistractor, left shorttoothed bar: 110 mm
50-417.02Caspar Vertebraldistractor, left longtoothed bar: 130 mm
50-420.01Screw driver, with black Radel handle (PPSU)
50-419.02Caspar Drill Ø1.7mm,drilling depth 14 mmfor distraction screws
50-419.01Caspar Drill Ø1.7mm,drilling depth 8 mmfor distraction screws
Pin for Caspar Distractor
50-416.12 12 mm 50-416.14 14 mm50-416.16 16 mm50-416.19 19 mm
50-418.02Drill guide, left, with blackRadel handle (PPSU)
50-418.01Drill guide, right, with blackRadel handle (PPSU)
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 6
Caspar Spine Retractor
50-403.02CASPAR Counter Retractor(without blades)
CASPAR spine specula, black,TiAlN coated surface
50-402.01 40 mm50-402.02 45 mm50-402.03 50 mm50-402.04 55 mm50-402.05 60 mm50-402.06 65 mm50-402.07 75 mm50-402.08 85 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 7
Caspar Spine Retractor
CASPAR blade, medial, black, TiAlN coated surface
corresponding blades compatible for the CASPAR counter retractor 50-403.02
CASPAR blade, lateral, black, TiAlN coated surface
blade length 50-403.20 40 mm50-403.21 45 mm50-403.22 50 mm50-403.23 55 mm50-403.24 60 mm50-403.25 65 mm50-403.26 70 mm50-403.27 75 mm
blade length 50-403.03 35 mm50-403.04 40 mm50-403.05 45 mm50-403.06 50 mm50-403.07 55 mm50-403.08 60 mm50-403.09 65 mm50-403.10 75 mm50-403.11 80 mm50-403.12 85 mm
50-407.01Retractor blade ejector
width length
50-302.26 6 mm 240 mm50-302.28 8 mm 240 mm50-302.30 10 mm 240 mm
Nerve root retractor
50-302.24 4 mm 240 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 8
Caspar Cervical Retractor System
Set: 50-390.00 CCR - CASPAR CERVICAL RETRACTOR SYSTEMNeurosurgery-Spine Set
Cervical Retractor set 19 mm titanium blade system for microsurgical techniques. Contains basic retractor and counter retractors plus blunt and toothed 19 x 25-60 mm blades, handle and depth gauge.
Part-#: QTY50-390.05 150-390.10 150-390.20 150-390.30 150-390.40 150-390.41 150-390.50 150-391.25
Product description:CCR-Tray, stainless steel with lid, dim.: 485 x 253 x 30 mm CCR - Caspar Double Hinged Cervical Basic Retractor Caspar, Double Hinged Cervical Counter Retractor Caspar, Double Hinged Counter Retractor, Fixation Screw Caspar, Handle for the insertion of blades and also for use as retractor side-load Caspar, Handle for the insertion of blades and also for use as retractor Caspar, Depth Gauge for determining length of blades Caspar, toothed blade, medial/lateral 19 x 25 mm, Titanium 2
50-391.30 Caspar, toothed blade, medial/lateral 19 x 30 mm, Titanium 250-391.35 Caspar, toothed blade, medial/lateral 19 x 35 mm, Titanium 250-391.40 Caspar, toothed blade, medial/lateral 19 x 40 mm, Titanium 250-391.45 Caspar, toothed blade, medial/lateral 19 x 45 mm, Titanium 250-391.50 Caspar, toothed blade, medial/lateral 19 x 50 mm, Titanium 250-391.55 Caspar, toothed blade, medial/lateral 19 x 55 mm, Titanium 250-391.60 Caspar, toothed blade, medial/lateral 19 x 60 mm, Titanium 250-392.25 Caspar, blunt blade, longitudinal 19 x 25 mm, Titanium 150-392.30 Caspar, blunt blade, longitudinal 19 x 30 mm, Titanium 150-392.35 Caspar, blunt blade, longitudinal 19 x 35 mm, Titanium 150-392.40 Caspar, blunt blade, longitudinal 19 x 40 mm, Titanium 150-392.45 Caspar, blunt blade, longitudinal 19 x 45 mm, Titanium 150-392.50 Caspar, blunt blade, longitudinal 19 x 50 mm, Titanium 150-392.55 Caspar, blunt blade, longitudinal 19 x 55 mm, Titanium 150-392.60 Caspar, blunt blade, longitudinal 19 x 60 mm, Titanium 160-500.10B Container 580 x 280 x 100 mm, bottom non-perforated / lid perforated, blue 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 9
Caspar Lumbar Retractor System
Set: 50-390.01 CLR - CASPAR LUMBAR RETRACTOR SYSTEMNeurosurgery-Spine SetCervical Retractor set with 20 mm titanium blade system for microsurgical techniques.Contains basic retractor with laminectomy hook plus toothed 20 x 35-85 mm blades, handle and depth gauge.
Part-#: 50-390.06
Product description: QTYCCR-Tray, stainless steel with lid dim.: 485 x 253 x 70 mm 1
50-390.4050-390.41
50-390.5050-390.6050-396.3550-396.4050-396.4550-396.5550-396.65
Caspar, Handle for the insertion of blades and also for use as retractor side-load 1Caspar, Handle for the insertion of blades and also for use as retractor 1cannulated with Luer-Lock, side-loadCaspar, Depth Gauge for determining length of blades 1CLR - Caspar Lumbar Basic Retractor side-load 1CLR - Caspar blade, 3-tooth 20 x 35 mm, Titanium 2CLR - Caspar blade, 3-tooth 20 x 40 mm, Titanium 2CLR - Caspar blade, 3-tooth 20 x 45 mm, Titanium 2CLR - Caspar blade, 3-tooth 20 x 55 mm, Titanium 2CLR - Caspar blade, 3-tooth 20 x 65 mm, Titanium 2CLR - Caspar blade, 6-tooth 40 x 35 mm, Titanium 2CLR - Caspar blade, 6-tooth 40 x 40 mm, Titanium 2
50-397.35
CLR - Caspar blade, 6-tooth 40 x 45 mm, Titanium 250-397.55 CLR - Caspar blade, 6-tooth 40 x 55 mm, Titanium 250-397.65 CLR - Caspar blade, 6-tooth 40 x 65 mm, Titanium 250-397.75 CLR - Caspar blade, 6-tooth 40 x 75 mm, Titanium 250-398.35 CLR - Caspar blade, 9-tooth 60 x 35 mm, Titanium 250-398.40 CLR - Caspar blade, 9-tooth 60 x 40 mm, Titanium 2
50-397.4050-397.45
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 10
Charnley Initial Incision Retractor
50-479.00 Charnley Initial Incision Retractor Set, complete / Standard Setconsisting of:50-479.01 Retractor Blade small50-479.02 Retractor Blade large50-479.03 Weight with chain50-479.04 Frame
Charnley Retractor Bladeswide deep Size in mm
50-479.01 Blade small 1" 1-1/4" (25x32)50-479.02 Blade large 1" 1-1/2" (25x38)50-479.10 Blade short 1" 2" (25x50)50-479.11 Blade short 1" 3" (25x76)50-479.12 Blade short 1" 4" (25x101)50-479.13 Blade short 1" 5" (25x127)50-479.20 Blade long 1" 2" (25x50)50-479.21 Blade long 1" 3" (25x76)50-479.22 Blade long 1" 4" (25x101)50-479.23 Blade long 1" 5" (25x127)
Short Blade
Long Blade
Weightwith Chain
Frame
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 11
Handheld Retractors
95-315.40Hohmann Retractor22 mm long tip, straight end, 40cm length
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 12
Handheld Retractors
95-379.30 30mm95-379.35 35mm
Fukuda-Kujat HumeralHead Retractor22.5cm, with T-handle
95-377.3295-377.40
width x depth 32mm x 81mm 40mm x 94mm
Fukuda Style Retractor6 1/2" with lip, T-handle
Useful for retracting the humeral head while exposing the glenoid.
Once seated in the gleno-humeral joint, the oval ring retracts the humeral head to allow exposure of the glenoid rim and its articular surface.
Serrations around ring help to improve traction.
Useful for retracting the humeralhead while exposing the glenoid.
width x depth 95-378.32 32mm x 81mm95-378.38 38mm x 81mm
Fukuda Shoulder Retractor7 1/2", T-handle
30mm
32mm
32mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 13
Handheld Retractors
Kolbel Glenoid Retractorsharp prongs
prongs 95-374.15 30cm 15mm 195-374.23 30cm 23mm 195-374.25 30cm 15mm 295-374.33 30cm 23mm 2
Useful to medially retract the subscapularis when prongs are securely seated in the glenoid neck. Also useful in securing the medial flap during capsule repair.
15mm 23mm
Kolbel Glenoid Retractor2 sharp prongs
95-375.23 10" 23mm95-375.15 11" 15mm
Useful to medially retract the subscapularis when prongs are securely seated in the glenoid neck. Also useful in securing the medial flap during capsule repair.
15mm 23mm
Useful to gain exposure when placed between the glenoid and humeral head.
The two prongs wrap around the posteriorrim to help distributeforce to the glenoidneck.
95-376.18Humeral Head Retractor2 blunt prongs strong curve7"
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 14
Cast-, Plaster Management
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 15
Cast-, Plaster Management
Vacuum System with Plaster Saw95-460.25
including:Vacuum Cleaner + Dust Removal Unit Tube, Hose clamp and ToolsPlaster Saw 95-460.22 with 2 Saw Blades diam. 50+65 mm, 2 wrenches
not including:Magnetic Plate (can be ordered seperately) Hanging kit for Saw (can be ordered seperately)
Main connection
Rated current
consumption
220-240 Volt 50/60 Hz or110-120 Volt 50/60 Hz
1300 Watt
Vaccum 244 mbar / 24,4 Kpa
Container Volume 15 L
Filter Performance 99,97% > 0,5 µm
Noise Level 59 dB (A)
Weight 8,0 kg
Cable Lenght 6 m
Air qunatity 61 l/s
Protection Class II
Safety IP Code IP2X
Warranty 18 months
In order to minimize the inhalation of dust of employees and to prevent bothersome dust in the working area and working rooms, the Dust Extractor was developed. It sets itself apart through a special high wor-king efficiency and fits to all GOLD and TITANIUM Oscillating Saws. To install the efficient dust extractor in no time at all, only normal tools are required. In combination with the Vacuum Cleaner and its outlet, that is specially made for the Cast Cutters, the dust extractor system is automatically switched on and off when the saw is used. The operation of a second switch is no longer necessary.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 16
Cast-, Plaster Management
Applicatory hose clamp Dust Removal Unit TITANIUM II
Magnetic placement area for saw blades
and tools95-460.29
Hanging kit with handle, height
adjustable95-460.26
With this set, dust in the workplace is reduced to a minimum. Its engineering and, in turn, effectiveness correspond precisely to the dust extraction requirements of GOLD an TITANIUM oscillation saws. Specially developed for the extraction of grinding dust and sawdust, the system filters out 99,97 % of all particles larger than 0,5 µm from the outgoing air. In this way, it makes an important contribution to the environ-ment and the economics of the orthopedic department alike. Thanks to the electrical circuit connecting of the set, the extractor switches on and off automatically with the saw in the standby mode.
This versatile and compact vacuum cleaner with its special filter technique is specially designed for the suction/ vacuuming of fine, dry cast cutting dust from plaster and synthetic casts. The enormous suction/vacu-um performance of the turbine is 1600 Watts by an air flow rate of 61 l/s and a vacuum of 244 mbar. 99,97% of all particles are filtered from the exhaust that are lar-ger than 0,5µm. For rational working, the dust removal system comes with an outlet that is specially designed for our Oscillating Saws. The standby-mode takes over the automatic on and off switching of the suction/vacu-um function.
Vacuum Cleaner without accessories
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 17
Cast-, Plaster Management
95-460.70
Flexible and robust tube complete, 2 m
95-460.31Paper Filter Bags 5 pieces
95-460.71ECO-Flat Folding Filterfor model series < 05/2010
95-460.73ECO-Flat Folding Filter, HEPA
95-460.75
Filter Basket
95-460.32Wet Filter Bags 5 pieces
95-460.72ECO Fleece Filterfor model series > 06/2010
95-460.74ECO Fleece Filter, HEPA
95-460.76Engine guard filter
Round Saw Bladefor Plaster Casts
Diameter Part-#50 mm 95-460.1465 mm 95-460.15
Round Saw Blade for Synthetic-Dressings, special hardened
Diameter Part-#50 mm 95-460.1965 mm 95-460.20
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 18
Cast-, Plaster Management
06-206.28Cast-, PlasterSpreader 28cm
Mod. USA
HENNING
06-206.23Cast-, PlasterSpreader 23cm
- designed for One handed operation
HOPKINS
95-460.52Cast Knife 20cm
ESMARCH
95-460.18Cast Knife 18cm
REINER
95-460.53Cast Knife 18cm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 19
PELVIC Instruments
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 20
PELVIC Instruments
Universal keyless Chuck with pull Release and T - Handle 95-172.05
Universal keyless Chuck with pull release 1,0 - 6,0 mm
T - Handle with Jacobs Chuck 95-172.02
Sharp Hook06-052.01 - sharp // 06-053.01 - blunt
Bone Lever for Pelvic surgery - width 24 mm95-316.50
Bone Hook with T-Handle, 18 cm, 18 x 21mm, sharp96-531.18
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 21
PELVIC Instruments
Pelvic Reposition Forceps 190 mm
95-288.03 for 3.5mm Screws95-398.851 for 4.5mm Screws
Reduction Forceps with points 200mm
95-301.00
Schanz Screw 6 x 200mm 95-228.15ST
Pelvic Reduction Forceps13,5", with speed lockadjustable jaws for screws95-190.10
Straight Ball Spike 12“ 99-398.540
Spiked Disk Dia. 25mm99-398.545
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 22
PELVIC Instruments
Pelvic Reduction Forceps angled 190 mm, small with pointed ball tips, speed lock99-398.840
Pelvic Reduction Forceps straight 250 mm, with pointed ball tips, speed lock99-398.890
Pelvic Reduction Forceps angled 230 mm, large with pointed ball tips, speed lock99-398.850
Plate Bending Pliers 10",for reconstruction plates 2.7 - 3.5mmmax. cap. 12mm x 2.5mm95-192.10
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 23
PELVIC Instruments
Pelvic Reduction Forceps 400 mm, 1x2 jaws, with long pointed-ball tips99-398.870
Pelvic Reduction Forceps 400 mm, with long pointed-ball tips 99-398.860
Asymetric Pelvic Reposition Forceps 400 mm, with ball tip, thread lock 99-398.770
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 24
PELVIC Instruments
Periarticular Reduction Forceps 15“, medium, 14-128mm opening, pointed ball tips with speedlock99-398.775
Periarticular Reduction Forceps 15“, large, 39-181mm opening, pointed ball tips with speedlock99-398.780
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 25
PELVIC Basic Instumentation Set: 59-001.01
Part-#: Product description: QTY06-052.01 Volkmann Retractor, 21.5cm, sharp 106-053.01 Volkmann Retractor, 21.5cm, blunt 160-500.10 Container 580 x 280 x 100 mm, bottom non-perforated / lid perforated, silver 160-602.05 Wire Basket 540 x 255 x 50 mm 160-650.01 Silicon Mat 440 x 230 mm 195-169.55 Twist Drill f. quick coup., 2,5 mm diam. 180/165mm 295-169.18 Twist Drill for Quick Coupling, diam. 3.2mm, 195/170mm, extra long 295-169.20 Twist Drill for Quick Coupling, diam. 3.5mm, 195/170mm, extra long 295-169.22 Twist Drill for Quick Coupling, diam. 4.5mm, 195/170mm, extra long 295-171.02 Taps, diam. 3,5 mm f. cancell. screws 295-174.04 Taps, diam. 4,5 mm 295-172.01 T-Handle with Quick Coupling, for Taps 195-172.02 Handle with Key, Jacobs Chuck 195-174.01 Depth Gauge, for large Screws 195-176.02 Screw Driver with hexagonal Head, 20cm hex=2,5mm, 1
for screws Ø 2.7/3.5/4.0mm Handle: Silicone95-176.03 Screw Driver with hexagonal Head, 20cm hex=3,5mm, 1
for screws Ø 4.5 / 6.5mm Handle: Silicone95-178.04 Screw Driver Element, hexagonal, small, 2.5mm, 1
for Quick Coupling95-178.20 Screwdriver shaft hexagonal 3.5mm, length 100mm, AO-coupling 195-190.10 PELVIC REDUCTION FORCEPS 13,5" 1
with speed lock adjustable jaw for screws with speedlock95-190.50 Plate Bending Iron for 3.5mm/4.5mm plates used in pairs (2 pcs.) 1 pair95-192.10 Plate Bending Pliers 10", for reconstruction plates 2.7 - 3.5mm 1
max. cap. 12mm x 2.5mm95-193.00 Screw Forcep, self-holding 195-228.15ST Blunt Half Pin 200 mm, 6 mm 495-288.01 Farabeuf-Lambotte Bone Holding Forceps, 260mm, with ratchet 195-288.03 Pelvic Repositions Forceps, 190mm with ratchet, for screws 3,5 mm 195-301.00 Bone Holding Forceps with Points, 200mm 195-316.50 Pelvic Single Prong Bone Lever, blade width 24mm 199-398.540 Straight Ball Spike, 12" 199-398.545 Spiked Disk dia. 25mm 499-398.770 Asymetric Pelvic Reduction Forceps, with ball tip, thread lock, 400 mm 199-398.440 Pelvic Reduction Forceps 190 mm, with short pointed-ball tip 199-398.850 Pelvic Reduction Forceps 230 mm, with long pointed-ball tips 199-398.860 Pelvic Reduction Forceps 400 mm, with long pointed-ball tips 199-398.870 Pelvic Reduction Forceps 250 mm angeled, short pointed-ball tips 199-398.890 Pelvic Reduction Forceps 400 mm, 1x2 jaws, with long pointed-ball tips 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 26
PELVIC Basic Implant Set
Set: 59-072.00 Pelvic Basic Implant Set:Reconstruction Plates 3.5mm are manufactured from relatively soft material. Due to their reduced stifness, they should be use only for cerclages or adaptions. Design and siftness of the material enable three-dimensional contouring with Bending Plier 95-192.10 or the Bending Iron 95-190.50.Note:Do not bend more than 15 degree.
Part-#: Product description: QTY59-072.10 Tray for Pelvic Implant Set 295-084.01 Aluminium Container, perforated 195-127.105ST Cortical Screw,3,5x105mm,self-tapping 395-127.110ST Cortical Screw,3,5x110mm,self-tapping 395-127.55ST Cortical Screw,3,5x55mm, self-tapping 395.127.60ST Cortical Screw,3,5x60mm, self-tapping 395-127.65ST Cortical Screw,3,5x65mm, self-tapping 395-127.70ST Cortical Screw,3,5x70mm,self-tapping 395-127.75ST Cortical Screw,3,5x75mm,self-tapping 395-127.80ST Cortical Screw,3,5x80mm,self-tapping 395-131.70ST Cortical Screw,4,5x70mm self-tapping 395-131.75ST Cortical Screw,4,5x75mm self-tapping 395-131.80ST Cortical Screw,4,5x80mm self-tapping 395-131.85ST Cortical Screw,4,5x85mm self-tapping 395-131.90ST Cortical Screw,4,5x90mm self-tapping 395-133.115 Cancell.Screw,6,5x115mm,16mm,partial threaded 395-133.120 Cancell.Screw,6,5x120mm,16mm,partial threaded 395-135.050 Cancell.Screws, 6,5 x 50 mm, full thread 395-135.055 Cancel.Screws, 6,5 x 55 mm, full thread 395-135.060 Cancel.Screws, 6,5 x 60 mm, full thread 395-139.02 Narrow Compression Plate, 2 Holes, 3.8mm x 12mm x 39mm 295-163.40 Reconstruction Plate, straight, 45mm, for large Screws 4.5mm, 3 Holes 295-163.41 Reconstruction Plate, straight, 61mm, for large Screws 4.5mm, 4 Holes 295-163.51 Reconstruction Plate, straight, 221mm, for large Screws 4.5mm, 14 Holes 195-163.60 Reconstruction Plate, straight, 58mm, for small Screws 3.5mm, 5 Holes 295-163.61 Reconstruction Plate, straight, 70mm, for small Screws 3.5mm, 6 Holes 295-163.62 Reconstruction Plate, straight, 82mm, for small Screws 3.5mm, 7 Holes 295-163.63 Reconstruction Plate, straight, 94mm, for small Screws 3.5mm, 8 Holes 295-163.64 Reconstruction Plate, straight, 106mm, for small Screws 3.5mm, 9 Holes 295-163.65 Reconstruction Plate, straight, 118mm, for small Screws 3.5mm, 10 Holes 195-163.67 Reconstruction Plate, straight, 142mm, for small Screws 3.5mm, 12 Holes 195-163.69 Reconstruction Plate, straight, 166mm, for small Screws 3.5mm, 14 Holes 195-163.71 Reconstruction Plate, straight, 190mm, for small Screws 3.5mm, 16 Holes 195-163.72 Reconstruction Plate, straight, 214mm, for small Screws 3.5mm, 18 Holes 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 27
WIRE, PIN & ROD Management
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 28
K-Wire Storage
K-Wire Rack95-551.01 Rack for K-Wires with 31 cm length
The racks are available for Kirschner Wires with 15 cm and 31 cm length. Other rack sizes are available upon request.
95-551.00Rack for K-Wires with 15 cm length
Wire Stored:Ø 1,0 / 1,2 / 1,4 / 1,6 / 1,8 / 2,0 /
2,5 / 3,0mm
Special rack sizes upon request!
95-551.01Rack for K-Wires with 31 cm length
Wire Stored:Ø 1,0 / 1,2 / 1,4 / 1,6 / 1,8 / 2,0 /
2,5 / 3,0mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 29
K-Wire and Pin Dispenser
K-Wire and Pin Dispenser
made out of stainless steel, with cap
- Handy container to store and dispense K-Wiresand Steinmann pins.
- Each dispenser is clearly marked with the size ofthe wires/pins held for quick identification.
- Dispenser is perforated- It is recommended to load blunt end first.- Will only dispense smooth (unthreaded)
wires and pins.
Conical shaped enddispenses one wire at a time.
Wire-Ø Length 12cm Length 18cm Length 32cm0.6 mm 95-552.06 95-553.06 95-554.060.8 mm 95-552.08 95-553.08 95-554.080.9 mm 95-552.09 95-553.09 95-554.091.0 mm 95-552.10 95-553.10 95-554.101.2 mm 95-552.121.4 mm 95-552.141.5 mm 95-552.151.6 mm 95-552.161.8 mm 95-552.182.0 mm 95-552.202.2 mm 95-552.222.5 mm 95-552.253.0 mm 95-552.30
95-552.xx 95-553.xx 95-554.xx
95-553.12 95-554.1295-553.14 95-554.1495-553.15 95-554.1595-553.16 95-554.1695-553.18 95-554.1895-553.20 95-554.2095-553.22 95-554.2295-553.25 95-554.2595-553.30 95-554.30
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 30
Wire Cutter
Vario-Cutter / shear cutting for K-Wires
Our high quality plate and wire cutting plier is also now optionally available as “VARIO-CUTTER” in 2 different designs.These characterize themselves through the integration of special shear cutters for K-wires up to a thickness of 3.5 mm.By a shear cut, a clean cutting edge is achieved and in addition effectively pre-vents spraying of the cutting clippings.
30-110.24S with shear cutter Ø 3.5 mm
30-110.25 with shear cutter Ø 3.5 mm and Ø 2.0 mm
For further product details and ordering information please contact your Ortho-Medical sales team. We will help you to find the appropriate product.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 31
Pin Cutters & Pin Shears
titAniuM pin cutterwith TITANIUM Nitride (TIN) coated jaws, a special hardened cutting edge (approx. 60 HRC) and handles made of Titanium.Due to the Titanium material the instrument is now 30% less in weight and has a longer durability against corrosion.The instrument cuts wires, bolts and rods up to 6.00 mm. Not to be used inside of a patient.
Specially hardened and coated jaws
Handle stop prevents jaw overload
30-110.60TI
Grooved handles for non-slip grip
30-110.38
pattern part-# Length Size Max. cap. Ø [mm]
Pin Side Cutter TITANIUM
30-110.50TI30-110.60TI
47 cm 54 cm
Medium Large
6.0 6.35
Pin Side Cutter Stainless Steel
30-110.3830-110.5030-110.60
38 cm 47 cm 54 cm
Small Medium Large
4.5 6.0 6.35
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 32
Pin Cutters & Pin Shears
30-131.38 ORLOS Pin/Rod End Cutter 38cm (15")DA (double action) pointed tip, in situ cuttermax. cap. 4.5mm [.177"]
30-131.80 replacement jaws
repLAceMent JAWS
part-# correspondingpin cutter
Jaw Material
30-110.38MKPL 30-110.38 Stainless Steel
30-110.MKPL 30-110.5030-110.60
Stainless Steel
30-110.MKPLTI 30-110.50TI30-110.60TI
TIN coated
30-110.MKPL
30-110.38MKPL
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 33
Pin Cutters & Pin Shears
30-137.29ORLOS In Situ Pin Shear Cutter, 29 cm
Shear 3 different pin diameters with 1 instrument.
made in GERMANY
• Double action design all ws for ease in cutting.
Shear 3 different pin diameters with 1 instrument.
• Grooved handles are ergonomically designed for acomfortable and secure grip.
• Shears 2.5mm [.098“] 3.0mm [.118“] and 3.5mm [.138“]diameter pins with ease and provides a clean cut withoutburrs or sharp edges.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 34
Rod Shear Cutters
30-136.57ORLOS Silicone In Situ Rod Shear Cutter, withdetachable handles, OAL=57cm
• Rods are sheared, leaving a smooth and clean surfacerather than a sharp, jagged, burr - like surface commonwhen using a standard pinching - type rod cutter.
Rod cut by standard pinching-type rod cutter
Rod cut by ORLOS Silicone In Situ Cutter
The ORLOS Rod Shears easily cuts: 4.5mm [.177“], 5.5mm [.217“] and 6.35mm [.250“]diameter pins and rods.
made in GERMANY
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 35
Rod Shear Cutters
detached view
• Double action designallows for ease in cutting.
• Quick handle release
• Available with detachable handles.
• No e: Instrument is not designed to be used inside the patient‘s body.
30-136.57ORLOS Silicone In Situ Rod Shear Cutter, withdetachable handles, OAL=57cm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 36
Rod Shear Cutters
30-136.58ORLOS Silicone In Situ Rod Shear Cutter, with detachable handles, OAL=57cmTable top base version
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 37
30-136.90ORLOS Table Top Base, onlyfor Silicone In Situ Rod Shear Cutter
Wire Guide, Passer
95-245.45Ø 45 mm
95-245.70Ø 70 mm
Wire Passer max cap 11 gauge [3.0mm] cerclage wire
phenolic handle
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 38
ORLOS
- Accessories- Instruments- Screws, Sets
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 39
ORLOS Locking Plate System Accessories
Plate Bending Iron for 3.5 / 4.5 mm plates 95-190.50
LC-DCP Neutral and Load Drill Guide
DM 3,5 mm 95-185.35
DM 4,5 mm 95-185.45
Use the green drill sleeve when drilling a screw hole in the neutral or buttress position.
Use the yellow drill sleeve when drilling a screw hole in the load position.
95-187.03Universal Drill Guide for neutral andcompression positioning 3,2 mm and 4,5 mm
95-187.04Universal Drill Guide 3.5 mm for neutral andcompression positioning Drill ø 2.5 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 40
Small cannulated Screws and Instrument Set 3,0 mm
SET Number 95-110.30SU / 95-110.40SU
Part-#: Product description: QTY95-001.01 Aluminium Container, perforated, 500 x 155 x 75mm/gold 195-110.22 Lower tray 195-110.23 Upper tray 195-117.010 Cannul. Screws, diam. 3,5 mm, 10 mm, thread length 4 mm 195-117.012 Cannul. Screws, diam. 3,5 mm, 12 mm, thread length 4 mm 195-117.014 Cannul. Screws, diam. 3,5 mm, 14 mm, thread length 5 mm 195-117.016 Cannul. Screws, diam. 3,5 mm, 16 mm, thread length 5 mm 195-117.018 Cannul. Screws, diam. 3,5 mm, 18 mm, thread length 6 mm 195-117.020 Cannul. Screws, diam. 3,5 mm, 20 mm, thread length 7 mm 195-117.022 Cannul. Screws, diam. 3,5 mm, 22 mm, thread length 7 mm 195-117.024 Cannul. Screws, diam. 3,5 mm, 24 mm, thread length 8 mm 195-117.026 Cannul. Screws, diam. 3,5 mm, 26 mm, thread length 8 mm 195-117.028 Cannul. Screws, diam. 3,5 mm, 28 mm, thread length 9 mm 195-117.030 Cannul. Screws, diam. 3,5 mm, 30 mm, thread length 10 mm 195-117.032 Cannul. Screws, diam. 3,5 mm, 32 mm, thread length 11 mm 195-117.034 Cannul. Screws, diam. 3,5 mm, 34 mm, thread length 11 mm 195-117.036 Cannul. Screws, diam. 3,5 mm, 36 mm, thread length 12 mm 195-117.038 Cannul. Screws, diam. 3,5 mm, 38 mm, thread length 12 mm 195-117.040 Cannul. Screws, diam. 3,5 mm, 40 mm, thread length 13 mm 195-117.042 Cannul. Screws, diam. 3,5 mm, 42 mm, thread length 14 mm 195-117.044 Cannul. Screws, diam. 3,5 mm, 44mm, thread length 14 mm 195-117.046 Cannul. Screws, diam. 3,5 mm, 46mm, thread length 15 mm 195-117.050 Cannul. Screws, diam. 3,5 mm, 50 mm, thread length 16 mm 195-118.010 Cannul. Screws, diam. 3,5 mm, 10 mm 195-118.012 Cannul. Screws, diam. 3,5 mm, 12 mm 195-118.014 Cannul. Screws, diam. 3,5 mm, 14 mm 195-118.016 Cannul. Screws, diam. 3,5 mm, 16 mm 195-118.018 Cannul. Screws, diam. 3,5 mm, 18 mm 195-118.020 Cannul. Screws, diam. 3,5 mm, 20 mm 195-118.022 Cannul. Screws, diam. 3,5 mm, 22 mm 195-118024. Cannul. Screws, diam. 3,5 mm, 24 mm 195-118.026 Cannul. Screws, diam. 3,5 mm, 26 mm 195-118.028 Cannul. Screws, diam. 3,5 mm, 28 mm 195-118.030 Cannul. Screws, diam. 3,5 mm, 30 mm 195-118.032 Cannul. Screws, diam. 3,5 mm, 32 mm 195-118.034 Cannul. Screws, diam. 3,5 mm, 34 mm 195-118.036 Cannul. Screws, diam. 3,5 mm, 36 mm 195-118.038 Cannul. Screws, diam. 3,5 mm, 38 mm 195-118.040 Cannul. Screws, diam. 3,5 mm, 40 mm 195-118.042 Cannul. Screws, diam. 3,5 mm, 42 mm 195-118.044 Cannul. Screws, diam. 3,5 mm, 44 mm 195-118.046 Cannul. Screws, diam. 3,5 mm, 46 mm 195-118.048 Cannul. Screws, diam. 3,5 mm, 48 mm 195-118.050 Cannul. Screws, diam. 3,5 mm, 50 mm 195-120.00 Tissue Protector- and Tapping Sleeve 195-193.00 Screw Forcep, self-holding 195-233.10 Kirschner Wires with Trocar Point and round End, 1.0 x 150mm 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 41
ORLOS Instrumentation Set 3.0mm
SET Number 92-200.02
Part-#: Product description QTY92-200.01 Tray for Locking Plate 3.0 195-169.14 Drill bit for Quick Coupling, diam. 2.0mm, 100/75mm 195-169.15 Twist Drill for Quick Coupling, diam. 2.5mm, 110/85mm 195-172.01 T-Handle with Quick Coupling, for Taps 195-172.02 Depth Gauge, for small Screws, diam. 2.7mm - 4.0mm 195-178.50 Screw Driver, T-8, phenolic handle 195-187.50 Double Drill Sleeve, diam. 2.0/ 2.5mm, with inserts 195-193.00 Screw Forcep, self-holding 199-319.440 Holding Clamp for Washers 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 42
ORLOS Instrument and Implant Set 3.0
Part-#: Product description: QTY92-200.01 Tray for Locking Plate 3.0 195-400.12 OrLoS Cortical Screw angle-stable Ø3.0mm 12mm length, self-tapping, titanium 195-400.14 OrLoS Cortical Screw angle-stable Ø3.0mm 14mm length, self-tapping, titanium 195-400.16 OrLoS Cortical Screw angle-stable Ø3.0mm 16mm length, self-tapping, titanium 195-400.18 OrLoS Cortical Screw angle-stable Ø3.0mm 18mm length, self-tapping, titanium 195-400.20 OrLoS Cortical Screw angle-stable Ø3.0mm 20mm length, self-tapping, titanium 195-400.22 OrLoS Cortical Screw angle-stable Ø3.0mm 22mm length, self-tapping, titanium 295-400.24 OrLoS Cortical Screw angle-stable Ø3.0mm 24mm length, self-tapping, titanium 295-400.26 OrLoS Cortical Screw angle-stable Ø3.0mm 26mm length, self-tapping, titanium 295-400.28 OrLoS Cortical Screw angle-stable Ø3.0mm 28mm length, self-tapping, titanium 295-400.30 OrLoS Cortical Screw angle-stable Ø3.0mm 30mm length, self-tapping, titanium 295-400.32 OrLoS Cortical Screw angle-stable Ø3.0mm 32mm length, self-tapping, titanium 295-400.34 OrLoS Cortical Screw angle-stable Ø3.0mm 34mm length, self-tapping, titanium 295-400.36 OrLoS Cortical Screw angle-stable Ø3.0mm 36mm length, self-tapping, titanium 295-400.38 OrLoS Cortical Screw angle-stable Ø3.0mm 38mm length, self-tapping, titanium 295-400.40 OrLoS Cortical Screw angle-stable Ø3.0mm 40mm length, self-tapping, titanium 295-400.42 OrLoS Cortical Screw angle-stable Ø3.0mm 42mm length, self-tapping, titanium 295-400.44 OrLoS Cortical Screw angle-stable Ø3.0mm 44mm length, self-tapping, titanium 295-400.48 OrLoS Cortical Screw angle-stable Ø3.0mm 46mm length, self-tapping, titanium 295-400.48 OrLoS Cortical Screw angle-stable Ø3.0mm 48mm length, self-tapping, titanium 295-400.50 OrLoS Cortical Screw angle-stable Ø3.0mm 50mm length, self-tapping, titanium 292-400.52 OrLoS Cortical Screw angle-stable Ø3.0mm 52mm length, self-tapping, titanium 192-400.54 OrLoS Cortical Screw angle-stable Ø3.0mm 54mm length, self-tapping, titanium 192-400.56 OrLoS Cortical Screw angle-stable Ø3.0mm 56mm length, self-tapping, titanium 192-400.58 OrLoS Cortical Screw angle-stable Ø3.0mm 58mm length, self-tapping, titanium 192-400.60 OrLoS Cortical Screw angle-stable Ø3.0mm 60mm length, self-tapping, titanium 192-401.12 OrLoS Cancellous Screw angle-stable Ø 3.0x12mm length, self-tapping, titan 292-401.14 OrLoS Cancellous Screw angle-stable Ø 3.0x14mm length, self-tapping, titan 292-401.16 OrLoS Cancellous Screw angle-stable Ø 3.0x16mm length, self-tapping, titan 292-401.18 OrLoS Cancellous Screw angle-stable Ø 3.0x18mm length, self-tapping, titan 292-401.20 OrLoS Cancellous Screw angle-stable Ø 3.0x20mm length, self-tapping, titan 292-401.22 OrLoS Cancellous Screw angle-stable Ø 3.0x22mm length, self-tapping, titan 292-401.24 OrLoS Cancellous Screw angle-stable Ø 3.0x24mm length, self-tapping, titan 292-401.26 OrLoS Cancellous Screw angle-stable Ø 3.0x26mm length, self-tapping, titan 292-401.28 OrLoS Cancellous Screw angle-stable Ø 3.0x28mm length, self-tapping, titan 292-401.30 OrLoS Cancellous Screw angle-stable Ø 3.0x30mm length, self-tapping, titan 292-401.32 OrLoS Cancellous Screw angle-stable Ø 3.0x32mm length, self-tapping, titan 292-401.34 OrLoS Cancellous Screw angle-stable Ø 3.0x34mm length, self-tapping, titan 292-401.36 OrLoS Cancellous Screw angle-stable Ø 3.0x36mm length, self-tapping, titan 292-401.38 OrLoS Cancellous Screw angle-stable Ø 3.0x38mm length, self-tapping, titan 292-401.40 OrLoS Cancellous Screw angle-stable Ø 3.0x40mm length, self-tapping, titan 292-401.42 OrLoS Cancellous Screw angle-stable Ø 3.0x42mm length, self-tapping, titan 292-401.44 OrLoS Cancellous Screw angle-stable Ø 3.0x44mm length, self-tapping, titan 292-401.46 OrLoS Cancellous Screw angle-stable Ø 3.0x46mm length, self-tapping, titan 2
SET Number 92-200.00
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 43
ORLOS Instrument and Implant Set 3.0 - continuation
Part-#: QTY92-92-401.48 292-92-401.50 292-92-401.52 292-92-401.54 292-92-401.56 292-92-401.58 292-92-401.60 292-92-403.12
Product description OrLoS Cancellous Screw angle-stable Ø 3.0x48mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x50mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x52mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x54mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x56mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x58mm length, self-tapping, titan OrLoS Cancellous Screw angle-stable Ø 3.0x60mm length, self-tapping, titan OrLoS Cortical Screw Ø3.0mm 12mm length, self-tapping, titanium 1
92-92-403.14 192-92-403.16 192-92-403.18 192-92-403.20 192-92-403.22 292-92-403.24 292-92-403.26 292-92-403.28 292-92-403.30 292-92-403.32 292-92-403.34 292-92-403.36 292-92-403.38 292-92-403.40 292-92-403.42
OrLoS Cortical Screw Ø3.0mm 14mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 16mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 18mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 20mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 22mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 24mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 26mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 28mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 30mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 32mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 34mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 36mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 38mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 40mm length, self-tapping, titanium OrLoS Cortical Screw Ø3.0mm 42mm length, self-tapping, titanium 2
92-403.44 OrLoS Cortical Screw Ø3.0mm 44mm length, self-tapping, titanium 292.403.46 OrLoS Cortical Screw Ø3.0mm 46mm length, self-tapping, titanium 292.403.48 OrLoS Cortical Screw Ø3.0mm 48mm length, self-tapping, titanium 292.403.50 OrLoS Cortical Screw Ø3.0mm 50mm length, self-tapping, titanium 292.403.52 OrLoS Cortical Screw Ø3.0mm 52mm length, self-tapping, titanium 192.403.54 OrLoS Cortical Screw Ø3.0mm 54mm length, self-tapping, titanium 192.403.56 OrLoS Cortical Screw Ø3.0mm 56mm length, self-tapping, titanium 192.403.58 OrLoS Cortical Screw Ø3.0mm 58mm length, self-tapping, titanium 192.403.60 OrLoS Cortical Screw Ø3.0mm 60mm length, self-tapping, titanium 192.404.12 OrLoS Cancellous Screw Ø3.0mm 12mm length, self-tapping, titanium 192.404.14 OrLoS Cancellous Screw Ø3.0mm 14mm length, self-tapping, titanium 192.404.16 OrLoS Cancellous Screw Ø3.0mm 16mm length, self-tapping, titanium 192.404.18 OrLoS Cancellous Screw Ø3.0mm 18mm length, self-tapping, titanium 192.404.20 OrLoS Cancellous Screw Ø3.0mm 20mm length, self-tapping, titanium 192.404.22 OrLoS Cancellous Screw Ø3.0mm 22mm length, self-tapping, titanium 292.404.24 OrLoS Cancellous Screw Ø3.0mm 24mm length, self-tapping, titanium 292.404.26 OrLoS Cancellous Screw Ø3.0mm 26mm length, self-tapping, titanium 292.404.28 OrLoS Cancellous Screw Ø3.0mm 28mm length, self-tapping, titanium 292.404.30 OrLoS Cancellous Screw Ø3.0mm 30mm length, self-tapping, titanium 292.404.32 OrLoS Cancellous Screw Ø3.0mm 32mm length, self-tapping, titanium 292.404.34 OrLoS Cancellous Screw Ø3.0mm 34mm length, self-tapping, titanium 292.404.36 OrLoS Cancellous Screw Ø3.0mm 36mm length, self-tapping, titanium 292.404.38 OrLoS Cancellous Screw Ø3.0mm 38mm length, self-tapping, titanium 292-404.40 OrLoS Cancellous Screw Ø3.0mm 40mm length, self-tapping, titanium 2
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 44
ORLOS Instrument and Implant Set 3.0 - continuation
Part-#: Product description QTY92-500.03L OrLoS Radius Plate Palmar angle-stable left, Head 9-Hole / Shaft 3-Hole 192-500.03R OrLoS Radius Plate Palmar angle-stable right, Head 9-Hole / Shaft 3-Hole 192-500.05L OrLoS Radius Plate Palmar angle-stable left, Head 9-Hole / Shaft 5-Hole 192-500.05R OrLoS Radius Plate Palmar angle-stable right, Head 9-Hole / Shaft 5-Hole 192-502.03L OrLoS Radius Plate Palmar ext. angle-sta left, Head 9-Hole / Shaft 3-Hole 192-502.03R OrLoS Radius Plate Palmar ext. angle-sta right, Head 9-Hole / Shaft 3-Hole 192-502.05L OrLoS Radius Plate Palmar ext. angle-sta left, Head 9-Hole / Shaft 5-Hole 192-502.05R OrLoS Radius Plate Palmar ext. angle-sta right, Head 9-Hole / Shaft 5-Hole 192-506.08L OrLoS Radius Plate palmar f. rev. angle-stable left, Head 9-Hole / Shaft 8-Hole 192-506.08R OrLoS Radius Plate palmar f. rev. angle-stable right, Head 9-Hole / Shaft 8-Hole 192-514.07 OrLoS Straight Plate angle-stable 7/2-Hole 192-514.08 OrLoS Straight Plate angle-stable 7/4-Hole 192-514.09 OrLoS Straight Plate angle-stable 9/4-Hole 192-514.11 OrLoS Straight Plate angle-stable 11/4-Hole 192-600.07 OrLoS Washer not angle stable 195-169.14 Drill bit for Quick Coupling, diam. 2.0mm, 100/75mm 195-169.15 Twist Drill for Quick Coupling, diam. 2.5mm, 110/85mm 195-172.01 T-Handle with Quick Coupling, for Taps 195-172.02 Depth Gauge, for small Screws, diam. 2.7mm - 4.0mm 195-178.50 Screw Driver, T-8 phenolic handle 195-187.50 Double Drill Sleeve, diam. 2.0/ 2.5mm, with inserts 195-193.00 Screw Forcep, self holding 199-319.440 Holding Clamp for Washers 1
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 45
Interferenzscrews
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 46
Various
Cobra Head Plate for Hip Arthrodesis 12 Holes in Shaft95-150.34
Drill Bit2,0mm diam.,for cannul.screws(Traumatology and Instruments B/22) 95-115.05
OrLoS Cannulated Cancellous Screw
Ø3.0mm self-tapping, titanium(ORLOS Locking Plate System 3.0 page 5)
Cat.No. Length95-405.12 12 mm95-405.14 14 mm95-405.16 16 mm95-405.18 18 mm95-405.20 20 mm95-405.22 22 mm95-405.24 24 mm95-405.26 26 mm95-405.28 28 mm95-405.30 30 mm95-405.32 32 mm95-405.34 34 mm95-405.36 36 mm95-405.38 38 mm95-405.40 40 mm
Mini Plates1,5 mm,100mm, 20 Holes95-164.49 Straight Mini Plate95-164.52 Straight Mini Plate95-164.53 Mini Adaption Plate95-164.55 Mini Adaption Plate
Gelpi Retractor(Traumatology and Instruments E/48)Cat.No. Length06-153.27 27,0 cm 06-153.28 28,0 cm
Cone Ring Curette 50-334.50 23 cm, Diam. 4 mm, straight50-334.60 23 cm, Diam. 4 mm, angled50-334.62 23 cm, Diam. 9 mm, angled
Plaster Spreader06-206.23 23 cm06-206.28 28 cm
Plaster knife95-460.52 20 cm Hopkins95-460.53 21 cm Martin95-460.54 18 cm Esmarch
Protective caps for gliding Nail 91-012.40
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 47
Various
Cannulated cancellous screws, 4,0 mm diam., with full thread(Traumatology and Instruments B/26)
Cat.No. Length92-130.10 10 mm92-130.12 12 mm92-130.14 14 mm92-130.16 16 mm92-130.18 18 mm92-130.20 20 mm92-130.22 22 mm92-130.24 24 mm92-130.26 26 mm92-130.28 28 mm92-130.30 30 mm92-130.32 32 mm92-130.34 34 mm92-130.35 35 mm92-130.36 36 mm92-130.38 38 mm92-130.40 40 mm92-130.42 42 mm92-130.44 44 mm92-130.45 45 mm92-130.46 46 mm92-130.48 48 mm92-130.50 50 mm92-130.52 52 mm92-130.54 54 mm92-130.55 55 mm92-130.56 56 mm92-130.58 58 mm92-130.60 60 mm
Cannulated cancellous screws, 4,0 mm diam., with part thread(Traumatology and Instruments B/26)
Cat.No. Length92-129.10 10 mm92-129.12 12 mm92-129.14 14 mm92-129.16 16 mm92-129.18 18 mm92-129.20 20 mm92-129.22 22 mm92-129.24 24 mm92-129.26 26 mm92-129.28 28 mm92-129.30 30 mm92-129.32 32 mm92-129.34 34 mm92-129.35 35 mm92-129.36 36 mm92-129.38 38 mm92-129.40 40 mm92-129.42 42 mm92-129.44 44 mm92-129.45 45 mm92-129.46 46 mm92-129.48 48 mm92-129.50 50 mm92-129.52 52 mm92-129.54 54 mm92-129.55 55 mm92-129.56 56 mm92-129.58 58 mm92-129.60 60 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 48
Laminectomy Rongeurs
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 49
Laminectomy Rongeurs
Ferris-Smith-Kerrison with outside T-Slot and Ejector40° down bite
(Other models with T-Slot and Ejector can be find in the Traumatology and Instruments Catalog)
All Articles can be delivered “ceramic” coated with the additional Code “BL”Other Shaft sizes and special Models:
1mm 2mm 3mm 25 cm Cutting downwards/
Backwards 30 cm 45-078.101BL 45-078.102BL 45-078.103BL
45-077.102BL 45-077.103BL40 cm 45-378.102BL 45-378.103BL
4mm 5mm 6mm 8mm25 cm Cutting downwards/
Backwards 30 cm 40 cm
45-078.104BL 45-078.105BL 45-078.106BL45-077.104BL 45-077.105BL 45-077.106BL45-378.104BL 45-378.105BL 45-378.106BL 45-378.108BL
1mm 2mm 3mm Cutting forward 18 cm
22 cm 25 cm 30 cm
45-055.101BL45-043.101BL 45-043.102BL 45-043.103BL45-160.101BL 45-160.102BL 45-160.103BL45-061.101BL
40 cm 45-361.103BL
4mm 5mm 6mm 8mmCutting forward 18 cm
22 cm 25 cm 30 cm 40 cm
45-043.104BL 45-043.105BL 45-043.106BL45-160.104BL 45-160.105BL 45-160.106BL
45-361.104BL 45-361.105BL 45-361.106BL 45-461.108BL
Other shaft sizes upon request.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 50
Kerrison - Standard
Cutting downwards/Backwards
18,0 cm – 7 "
1 mm2 mm 45-071.023 mm 45-071.034 mm 45-071.045 mm 45-071.056 mm 45-071.06
45-071.01
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 51
Laminectomy Rongeurs
(Other models can be find in the Traumatology and Instruments Catalog)
All Articles can be delivered “ceramic” coated with the additional Code “BL” With T-Slot - same Article Number but with .100 at the end (45-510.102BL)
Other shaft sizes upon request.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 52
Intervertebral Rongeurs
1mm 2mm 3mm 4mm 5mm Down 18 cm 46-060.01 46-060.05
25 cm 46-160.02 46-160.03 46-160.0530 cm 46-132.02 46-132.03 46-132.05
1mm 2mm 3mm 4mm 5mm Up 18 cm 46-055.05
25 cm 46-155.02 46-155.03 46-155.0530 cm 46-435.02 46-435.03 46-435.05
1mm 2mm 3mm 4mm 5mm Straight 18 cm 46-050.01 46-050.05
18 cm 18 cm 25 cm 46-150.02 46-150.0530 cm 46-130.02
46-050.133 (angled left)46-050.103 (an rigled ght)46-150.0346-130.03 46-130.05
1mm 2mm 3mm 4mm 5mm 46-118.01 46-118.02 46-118.03 46-118.04 46-118.05
46-085.02 46-085.03 46-085.05with theeth 18 cm
25 cm 30 cm 46-064.02 46-064.03 46-064.05
(Other models can be find in the Traumatology and Instruments Catalog on page D11)Other shaft sizes upon request.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 53
Spinal Kerrison - Double Coated / Silicon Handle
45-078.101BL Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 1 mm.
45-078.101BLS Silicon-Double Coated, Angled 45 Degree Backward, Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 1 mm.
45-078.102BL Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 2 mm.
45-078.102BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning
45-078.103BL
Ejector, Length 250 mm Size 2 mm
Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 3 mm.
45-078.103BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning
45-078.104BL
Ejector, Length 250 mm Size 3 mm
Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 4 mm.
45-078.104BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self
45-078.105BLCleaning Ejector, Length 250 mm Size 4 mm Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 5 mm.
45-078.105BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 5 mm
45-078.106BL Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 6 mm.
45-078.106BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 250 mm Size 6 mm
45-077.102BL Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 2 mm.
45-077.102BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 2 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 54
Spinal Kerrison - Double Coated / Silicon Handle
45-077.103BL
45-077.103BLS
Spinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 3 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 3 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 4 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 4 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 5 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 5 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 6 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 300 mm Size 6 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 2 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 2 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 3 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 3 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 4 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 4 mmSpinal Kerrison Angled 45 Degree Backward Double Coated , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 5 mmSilicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 5 mm
Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 6 mm.Item Related to Item 131004008
45-077.104BL
45-077.104BLS
45-077.105BL
45-077.105BLS
45-077.106BL
45-077.106BLS
45-378.102BL
45-378.102BLS
45-378.103BL
45-378.103BLS
45-378.104BL
45-378.104BLS
45-378.105BL
45-378.105BLS
Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 6 mm
45-378.108BL Spinal Kerrison Angled 45 Degree Backward Double Coa-ted , Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 8 mm
45-378.108BLS Silicon-Double Coated, Angled, 45 Degree, Backward, Anti Reflection, Self Cleaning Ejector, Length 400 mm Size 8 mm
45-510.102BL Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved Shaft Length 200 mm Size 2 mm
45-510.102BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled 45 Degree, Forward, Curved Shaft, Length 200 mm Size 2 mm
45-510.103BL Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved Shaft Length 200 mm Size 3 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 55
Spinal Kerrison - Double Coated / Silicon Handle
45-510.103BLS
45-510.104BL
45-510.104BLS
45-515.102BL
45-515.102BLS
45-515.103BL
Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Curved Shaft, Length 200 mm Size 3 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved ShaftCl Length 200 mm Size 4 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Curved Shaft, Length 200 mm Size 4 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved ShaftCl Length 250 Mm Size 2 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Curved Shaft, Length 250 mm Size 2 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved ShaftCl Length 250 Mm Size 3 mm
45-515.103BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Curved Shaft, Length 250 mm Size 3 mm
45-515.104BL Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Curved Shaft Length 250 Mm Size 4 mm
45-515.104BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejec-tor, Angled, 45 Degree, Forward, Curved Shaft, Length 250 mm Size 4 mm
45-160.101BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 1 mm
45-160.101BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 1 mm
45-160.102BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 1 mm
45-160.102BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 1 mm
45-160.103BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 3 mm
45-160.103BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 3 mm
45-160.104BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 4 mm
45-160.104BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 4 mm
45-160.105BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 5 mm
45-160.105BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 5 mm
45-160.106BL Spinal Kerrison Double Coated , Anti Reflection, Self Cle-aning Ejector Angled 45 Degree Forward Length 250 mm Size 6 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 56
Spinal Kerrison - Double Coated / Silicon Handle
45-160.106BLS
45-061.101BL
45-061.101BLS
45-061.102BL
45-061.102BLS
45-061.103BL
45-061.103BLS
45-061.104BL
Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 250 mm Size 6 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 1 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 300 mm Size 1 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 2 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 300 mm Size 2 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 3 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 300 mm Size 3 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 4 mm
45-061.104BLS Silicon-Double Coated, Anti Reflection, Self Cleaning
45-061.105BLEjector, Angled, 45 Degree, Forward, Length 300 mm Size 4 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 5 mm
45-061.105BLS Silicon-Double Coated, Anti Reflection, Self Cleaning
45-061.106BLEjector, Angled, 45 Degree, Forward, Length 300 mm Size 5 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 300 mm Size 6 mm
45-061.106BLS Silicon-Double Coated, Anti Reflection, Self Cleaning
45-361.103BLEjector, Angled, 45 Degree, Forward, Length 300 mm Size 6 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 400 mm Size 3 mm
45-361.103BLS Silicon-Double Coated, Anti Reflection, Self Cleaning
45-361.104BLEjector, Angled, 45 Degree, Forward, Length 400 mm Size 3 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 400 mm Size 4 mm
45-361.104BLS Silicon-Double Coated, Anti Reflection, Self Cleaning
45-361.105BLEjector, Angled, 45 Degree, Forward, Length 400 mm Size 4 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 400 mm Size 5 mm
45-361.105BLS Silicon-Double Coated, Anti Reflection, Self CleaningEjector, Angled, 45 Degree, Forward, Length 400 mm Size 5 mm
45-361.106BL Spinal Kerrison Double Coated, Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 400 mm Size 6 mm
45-361.106BLS Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 400 mm Size 6 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 57
Spinal Kerrison - Double Coated / Silicon Handle
45-361.108BL
45-361.108BLS
45-055.101BL
45-055.101BLS
45-055.102BL
45-055.102BLS
45-055.103BL
45-055.103BLS
45-055.104BL
Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Length 400 mm Size 8 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Length 400 mm Size 8 mmSpinal Kerrison Double Coated, Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180mm Size 1 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 1 mmSpinal Kerrison Double Coated, Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 2 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 2 mmSpinal Kerrison Double Coated, Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 3 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 3 mmSpinal Kerrison Double Coated, Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 4 mm
45-055.104BLS
45-055.105BL
45-055.105BLS
45-055.106BL
45-055.106BLS
45-043.101BL
45-043.101BLS
45-043.102BL
45-043.102BLS
45-043.103BL
45-043.103BLS
Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 4 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 5 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 5 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 6 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 6 mmSpinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 1 mm Silicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 1 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 2 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 2 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 3 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 3 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 58
Spinal Kerrison - Double Coated / Silicon Handle
45-043.104BL
45-043.104BLS
45-043.105BL
45-043.105BLS
45-043.106BL
45-043.106BLS
45-040.102BL
45-040.102BLS
45-040.103BL
45-040.103BLS
Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 4 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 4 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 5 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 5 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 45 Degree Forward Thin & Standard Foot Equally Distributed Length 220 mm Size 6 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 45 Degree, Forward, Thin & Standard Foot, Length 220 mm Size 6 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 90 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 2 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 90 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 2 mm Spinal Kerrison Double Coated , Anti Reflection, Self Cleaning Ejector Angled 90 Degree Forward Thin & Standard Foot Equally Distributed Length 180 mm Size 3 mmSilicon-Double Coated, Anti Reflection, Self Cleaning Ejector, Angled, 90 Degree, Forward, Thin & Standard Foot, Length 180 mm Size 3 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 59
Raspatories, Elevators, Curettes, Spatulas
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 60
Spinal Fusion Curettes
Cobb Curette95-467.00 - 95-467.04 (28,0 cm)95-468.00 - 95-468.04 (23,0 cm)
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 61
Bone Curettes
3mm / 90-822.73
BUSHE 25cm
4mm / 90-822.74
5mm / 90-822.75
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 62
Uterine Curettes
RECAMIER
biegsammalleable
festrigid
festrigid
Fig. a x bmm
scharfsharp
scharfsharp
stumpfblunt
31 cm – 12¼"
00 9 x 5 99-086.10 99-086.50 99-086.270 12 x 6 99-086.11 99-086.51 99-086.281 14 x 7 99-086.12 99-086.52 99-086.292 16 x 8 99-086.13 99-086.53 99-086.303 18 x 9 99-086.14 99-086-54 99-086.314 22 x 11 99-086.15 99-086.55 99-086.325 24 x 12 99-086.16 99-086.56 99-086.336 28 x 14 99-086.17 99-086.57 99-086.347 33 x 15 99-086.18 99-086.58 99-086.358 35 x 16 99-086.19 99-086.59 99-086.369 38 x 19 99-086.20 99-086.60 99-086.37
10 40 x 20 99-086.21 99-086.61 99-086.3811 45 x 21 99-086.22 99-086.62 99-086.3912 48 x 23 99-086.24 99-086.63 99-086.40
34 cm – 13½"
13 50 x 25 99-086.70 99-086.80 99-086.9014 55 x 30 99-086.71 99-086.81 99-086.9115 60 x 35 99-086.72 99-086.82 99-086.9216 65 x 40 99-086.73 99-086.83 99-086.93
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 63
Elevators
95-507.0695-507.1095-507.1295-507.1995-507.2595-509.0695-509.1395-509.1995-525.0695-525.1095-525.1395-528.1395-528.1395-528.1695-528.16
Metal Handle Cobb Elevator 11" Overall Length, Size 1/4" Metal Handle Cobb Elevator 11" Overall Length , Size 3/8" Metal Handle Cobb Elevator 11" Overall Length , Size 1/2"Metal Handle Cobb Elevator 11" Overall Length , Size 3/4" Metal Handle Cobb Elevator 11" Overall Length , Size 1" Metal Handle Cobb Elevator 9" Overall Length , Size 1/4" Metal Handle Cobb Elevator 9" Overall Length Size 1/2" Metal Handle Cobb Elevator 9" Overall Length , Size 3/4" Flat Cobb Elevator 10" Overall Length , Non Sliparry Handle(Non Woden) , Size 1/4" Flat Cobb Elevator 10" Overall Length, Non Sliparry Handle(Non Woden), Size 3/8" Flat Cobb Elevator 10" Overall Length, Non Sliparry Handle(Non Woden) 5" Size 1/2" Flat Cobb Elevator 13" Overall Length, Non Sliparry Handle(Non Woden) , Size 1/2" Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 1/2"Flat Cobb Elevator 13" Overall Length , Non Sliparry Handle(Non Woden) , Size 5/8" Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 5/8"
95-528.19 Flat Cobb ElevatorFlat 13" Overall Length , Non Sliparry Handle(Non Woden) , Size 3/4" 95-528.19 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 3/4" 95-528.25 Flat Cobb Elevator 13" Overall Length , Non Sliparry Handle(Non Woden) , Size 1" 95-528.25 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 1" 95-528.30 Flat Cobb Elevator 13" Overall Length , Non Sliparry Handle(Non Woden) , Size 30 mm 95-528.30 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 30 mm 95-530.13 Flat Cobb Elevator 15" Overall Length , Non Sliparry Handle(Non Woden) , Size 1/2" 95-530.13 Flat Cobb Elevator , Long Non Sliparry Handle(Non Woden) , Size 1/2"95-530.13 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 1/2" 95-530.16 Flat Cobb Elevator 15" Overall Length , Non Sliparry Handle(Non Woden) , Size 5/8" 95-530.16 Flat Cobb Elevator , LongNon Sliparry Handle(Non Woden) , 15" Overall Length , Size 5/8" 95-530.16 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 5/8" 95-530.19 Flat Cobb Elevator 15" Overall Length , Non Sliparry Handle(Non Woden) , Size 3/4" 95-530.19 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, 15" Overall Length, Size 3/4" 95-530.25 Flat Cobb Elevator 15" Overall Length , Non Sliparry Handle(Non Woden) , Size 1" 95-530.25 Flat Cobb Elevator , Long Non Sliparry Handle(Non Woden) , 15" Overall Length, Size 1" 95-530.25 Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, 15" Overall Length , Size 1" 95-530.30 Flat Cobb Elevator 15" Overall Length , Non Sliparry Handle(Non Woden) , Size 30 mm 95-530.3095-530.3095-531.1695-531.19
Flat Cobb Elevator , Long Non Sliparry Handle(Non Woden) , Size 30 mm Spinal Long Non Sliparry Handle(Non Woden) Cobb Elevator, Size 30 mm Shovel Nose Elevator 15" Overall Length , Size 5/8" Shovel Nose Elevator 15" Overall Length, Size 3/4 "
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 64
Elevators
COBB Elevator with Plastic Handle, curved, 25cm
width95-508.10 10 mm95-508.13 13 mm95-508.19 19 mm95-508.25 25 mm
Instruments with Plastic Handles:A highly resistant thermoplastic having much better characteristics than the often used Ferrozell:- Excellent resistance against acids and leaches, therefore much safer
than Ferrozell from the hygiene point of view- High form stability even after hundreds of sterilisation cycles- High solidity even when exposed to extreme loads- Highly colour-fast- Tremendously reduced need of repair- FDA approved- Suitable for all sterilisation procedures
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 65
Periosteal Elevators
sharp
17,5 cm – 7" 3 mm 95-511.03
18 cm – 7" 6 mm 95-511.06
19 cm – 7½"10 mm 95-511.09
13 mm 95-511.12
20 cm – 8"
16 mm 95-511.16
19 mm 95-511.19
25 mm 95-511.25
KEY
slightly curved,blunt
strongly curved,blunt
15,5 cm – 6"
95-500.45 95-500.50
4,5 mm
KÖNIG
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 66
SPATULAS
33 cm / 13“
13 mm 17-741.13
19 mm 17-741.19
25 mm 17-741.25
30 mm 17-741.30
32 mm 17-741.32
40 mm 17-741.40
50 mm 17-741.50
75 mm 17-741.75
TUFFIER
biegsammalleable
biegsammalleable
biegsammalleable
20 cm /8“
6,5 mm 17-742.06
9,5 mm 17-742.09
13 mm 17-742.13
16 mm 17-742.16
19 mm 17-742.19
25 cm /10“ 25 mm 17-742.125
HABERER REVERDIN
28,5 cm / 11-1/4“
17-743.28
17 / 25 mm
20 cm / 8“
17-739.20
biegsammalleable
28 cm /11“ 25 / 30 mm 17-740.30
30 cm /11-3/4“
37 / 45 mm 17-740.45
40 / 50 mm 17-740.50
RIBBONRIBBON
biegsammalleable
DAVIS
20 cm / 8“
6,5 mm 50-495.06
9,5 mm 50-495.09
13 mm 50-495.13
19 mm 50-495.19
25 mm 50-495.25
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 67
DISSECTORS
TOENNIS Dissector 25cm. double-ended tip sizes95-510.05 5/6 mm95-510.06 3.5/5.5 mm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 68
Scalpels, Knives,Saws
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 69
Scalpel Handles
No. 312,5 cm – 5"99-010.03
No. 716 cm – 6¼"99-010.07
No. 7 K12 cm – 4¾"99-010.07K
No. 3 L21 cm – 8¼"99-010.03L
No. 321 cm – 8¼"99-010.03LA
No. 515 cm – 6"99-010.05
No. 5 A15 cm – 6"99-010.05A
angled
angled
blades # 10-15 blades # 10-15blades # 10-15blades # 10-15
blades # 10-15blades # 10-15
No. 3 - graduated, not calibrated 12,5 cm – 5" 99-010.03S blades #10-15blades # 10-15
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 70
Scalpel Handles
No. 413,5 cm – 5¼"99-010.04
No. 4 - graduated, not calibrated 13,5 cm – 5¼" 99-010.04S
No. 4 L21 cm – 8¼"99-010.04L
No. 4 L21 cm – 8¼"99-010.04L
angled
HARDY Scalpel Handle vertical, 24cm
50-337.24
HARDY Scalpel Handle lateral, 24cm
50-337.25
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 71
Saws & Saw Blades
WALTON Finger Ring Cutter,17cm - 6-3/4"(complete with 1 saw blade)95-460.35
Saw blade, only
95-460.350
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 72
Bone Files
Bone Files
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 73
Bone Files
90-823.22Bone File 22 cm
90-823.24Bone File 24,5 cm
95-454.27Putti Bone Rasp 27 cm
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 74
ORHO EDICAL GmbH •IMPLANTS
Dynamic Hip Screw System
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 75
Dynamic Hip Screw System
95-091.50Guide Sleeve, long, NEW forscrewing in the lag screws
95-078.41: 135°95-078.42: 140°95-078.43: 145°95-078.44: 150°
Drill Guide for DHS Plates
95-093.50 Coupling Screw NEW (to be used with 95-095.50)
95-096.50 Impactor NEW
95-095.50 T-Handle Wrench NEW (in combination with 95-093.50)
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 76
Osteotomes,Chisels
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 77
Interchangeable
95-415.40 180 mm – 7"Handle only, with screw SW 3 mm, without key
B95-415.44 15 mm95-415.41 10 mm95-415.42 16 mm95-415.43 25 mm
Chisels
Radius95-415.50 50 mm95-415.60 60 mm95-415.70 70 mm
Gouges
95-415.45 SW 3 mm
Key
95-415.46 SW 3 mm
Screw
B95-415. 15 mm95-415. 10 mm95-415. 16 mm95-415. 25 mm
Osteotomes
Interchangeable blades
B B
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 78
Cups,Bowls
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 79
Cups, Bowls
NierenschalenKidney bowls
0,25 l 170 x 36 mm 95-000.010,50 l 250 x 32 mm 95-000.020,75 l 275 x 45 mm 95-000.03
Ø x HØ x h
LiterLitre
SchalenCups
40 x 19 mm 15 ml 95-000.0561 x 30 mm 0,07 l 95-000.0880 x 40 mm 0,14 l 95-000.04
116 x 50 mm 0,35 l 95-000.07128 x 55 mm 0,45 l --147 x 65 mm 0,70 l 95-000.06175 x 70 mm 1,10 l 95-000.10187 x 85 mm 1,60 l --
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 80
DIAGNOSTIC
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 81
Diagnostic Instruments
Lead Hand with Tabs
99-020.01 for Adults, 14"99-020.02 for Child, 10"
Oxidation of lead surface is a normal process.
Per DIN EN 285, autoclave temperatures should not exceed:Dry Heat: 356°F (180°C) 30 minutes
Steam: 248°F (120°C) 20 minutes
Avoid chemical sterilization.
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 82
MALLETS
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 83
Mallets
Stainless steel headwith aluminum handle.
weight: approx. 480ghead diameter: 45mm
95-334.52
Bergmannfull steel head, Ø45mmwith Aluminum handle
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 84
SETS
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 85
59-009.00 MAJOR BASIC Set for General Surgery
60-500.20Container 580x280x200mm, bottom non-perforated/lif pervorated, silver
60-600.05 08-175.27Gross-Maier polypus and dressing forcep, curved 27cm
08-163.11
60-650.01
08-164.11
99-010.04 99-010.03 02-027.14 02-037.18 02-036.20 02-036.23 01-259.18 02-012.16 01-002.14
04-029.14 04-029.20 17-088.16 17-090.20 04-001.20 04-044.17 08-075.14 08-076.14 08-030.12 08-016.12
08-019.18Halstead-Mosquito 18cm, straight
08-021.18Halstead-Mosquito 18cm, straight, 1:2 teeth
08-078.20Kocher-Ochsner 20cm, straight
99-041.10
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 86
59-009.00 MAJOR BASIC Set for General Surgery
08-078.24 08-174.25 08-092.2108-159.20 08-093.21 08-094.21
08-125.19 05-108.15 05-117.20 05-109.18 06-102.00 06-068.02 06-068.04
06-072.06 06-054.04 06-029.02 06-047.14 99-080.21 99-010.16AT
95-431.04
55-011.16
55-010.04
99-160.02
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 87
59-009.00 MAJOR BASIC Set for General Surgery
95-000.04 95-000.09 95-000.02 99-041.10 99-041.12
Ortho-Medical GmbH / Hauptstrasse 5 / 78589 Dürbheim / Germany 88
Ortho-Medical GmbH Hauptstrasse 5 78589 Dürbheim GermanyTelefon +49 (74 24)94 03-40 [email protected] www.orthomedical.de
Edition 2018|01 | Revision: 20.01.2020Printed in Malaysia · Copyright by ORTHO-MEDICAL GmbH, Implants
We reserve the right to make alterations.