OrePac Moulding and Millwork Guide

38

description

 

Transcript of OrePac Moulding and Millwork Guide

Page 1: OrePac Moulding and Millwork Guide
Page 2: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale. 1

Table of Contents

Service - Quality - Integrity

Primed MDF, Hemlock & FJ Primed Pine Casing .................................... 2-5 Base ........................................ 6-8 Crowns .................................. 9-10 Chair Rails ................................ 11 Hand Rails ................................ 11 Trims ........................................ 12 Rounds ..................................... 13 Outside Corners ........................ 13 Coves ....................................... 14 Stops ........................................ 14 OG & Moulded Batten ............... 14 Bullnose, Lattice & Screen ........... 15 Squares .................................... 15 Miscellaneous ........................... 16 Finish Lumber ............................ 17

Unfi nished woodwork is vulnerable! Apply fi nish as soon as possible following themanufacturer’s fi nishing instructions.

Never expose unpainted millwork to direct sunlight!

Always protect unfi nished millwork from moist conditions. Never store on the ground, on concrete, or where rain can blow in.

All mouldings should be stored horizontally off the fl oor and in a dry location

It’s critical to protect millwork from direct sunlight prior to fi nishing to avoid rapid drying and bleaching. Even a few hours exposure to direct sunlight causes drying and bleaching. Millwork must be stored in a dry area

away from excess heat. Never store on the ground, nor allow wood to come into direct contact with concrete. The natural tendency of concrete to absorb moisture can create a “wicking” of moisture out of the air or the ground and into the wood.

Mouldings must be acclimated72 hours prior to installation, mouldings should be unbundled and allowed to acclimate to the environment in the room in which they will be installed, with a controlled humidity level. The humidity at the time of acclimation should be similar to the humidity expected upon occupancy of the project.

FinishingLight sanding is required prior to fi nishing. Follow manufacturer’s recommended instructions for your product type.

Care and handling of Millwork

Hardwoods Casing ................................ 18-19 Base .................................... 20-21 Crowns ..................................... 22 Bullnose .................................... 23 Squares .................................... 23 Quarter Rounds ........................ 23 Miscellaneous ...................... 24-25 Components .............................. 26 Components FJ Veneer ............... 27 Finish Lumber ............................ 28 Patterns .................................... 28 Radius Base Corners .................. 29 Rosettes .................................... 30 Plinth Blocks .............................. 30 Corners .................................... 30 Build - Up Suggestions ............... 31 Index ................................... 32-36

Page 3: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

2

5020 ArchitravePrimed MDF - F6250201-1/8 x 5-1/4

Hemlock - H5020A1-1/8 x 5-1/4

5000 ArchitravePrimed MDF - F6250001-1/4 x 3-3/4

Hemlock - H50001-3/16 x 3-3/4

1254 ArchitraveHemlock - H1254751-1/4 x 4-3/4

410Primed MDF - F62041011/16 x 2-1/4

411Primed MDF - F6214113/4 x 3

Hemlock - H4113/4 x 3

388Primed MDF - F62038811/16 x 3-1/4

49Primed MDF - F5200491 x 3-1/4

190 TraditionalHemlock - H19011/16 x 2-1/4

FJ Primed Pine - P3201905/8 x 2-1/4

195 TraditionalHemlock - H1955/8 x 3-1/4

535Primed MDF - F6215353/4 x 3-1/2

Hemlock - H5353/4 x 3-1/2

Primed MDF - Hemlock - FJ Primed Pine

Casing

Page 4: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

3

120 ColonialHemlock - H1209/16 x 2-1/4

002Primed MDF - F6200025/8 x 2-1/4

003Primed MDF - F62000311/16 x 3-1/4

FJ Primed Pine - P3201505/8 x 3-1/4

444 ColonialPrimed MDF - F6204449/16 x 3-1/8

Hemlock - H4445/8 x 3-1/4

FJ Primed Pine - P620444A5/8 x 3-1/8

Knotty Pine - P7204445/8 x 3-1/4

3005 BeadedHemlock - H30051/2 x 1-1/2

FJ Primed Pine - P3230051/2 x 1-9/16

350 BeadedHemlock - H3509/16 x 2-1/4 312 Beaded

Primed MDF - F6203125/8 x 3

233Primed MDF - F6202339/16 x 3-1/4

2000C ColonialHemlock - H2000C11/16 x 2-1/2

2150 CasingHemlock - H21505/8 x 3-1/4

Primed MDF - F62021505/8 x 3-1/4

Primed MDF - Hemlock - FJ Primed Pine

Casing

Page 5: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

4

3000 BevelHemlock - H30001/2 x 1-1/2

FJ Primed - P3230007/16 x 1-7/16

Golden Oak - DC300014GO7/16 x 1-1/2

3002 BevelHemlock - H30021/2 x 2-1/4

FJ Primed Pine - P3230029/16 x 2-1/4

Golden Oak - DC300214GO7/16 x 2-1/4

356 ColonialPrimed MDF - F6203569/16 x 2-1/4

Hemlock - H356WM5/8 x 2-1/4

FJ Primed Pine - P6213565/8 x 2-1/4

Knotty Pine - P7203565/8 x 2-1/4

Hemlock - H356VG5/8 x 2-1/4

110 SanitaryHemlock - H1109/16 x 1-1/2

130 SanitaryHemlock - H1309/16 x 2-1/4

158 BevelPrimed MDF - F6201589/16 x 1-9/16

214 BevelPrimed MDF - F6202149/16 x 2-1/4

324 BevelHemlock - H324WM11/16 x 2-1/4

3014 StreamlineHemlock - H30147/16 x 2-1/4

327 StreamlineHemlock - H3275/8 x 2-1/4

111 VictorianHemlock - H11113/16 x 3-1/4

200 VictorianFJ Primed Pine - P3202005/8 x 3-1/2

19 MouldedPrimed MDF - F6200199/16 x 2-1/4

Hemlock - H199/16 x 2-1/4

32 StepFJ Primed Pine - P3200325/8 x 2-1/4

34 StepFJ Primed Pine - P3200345/8 x 3-1/4

102 StepHemlock - H1029/16 x 2-1/4

Primed MDF - Hemlock - FJ Primed Pine

Casing

Page 6: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

5

1208 BeadedHemlock - H120811/16 x 2-1/2

FJ Primed Pine - P32120811/16 x 2-1/2

140 MouldedHemlock - H1405/8 x 2-1/2

FJ Primed Pine - P3201405/8 x 2-1/2

338 HowePrimed MDF - F6203381 x 3-1/4

472 E2E BullnoseHemlock -VG - H472VG5/8 x 2-1/4

473 E2E BullnosePrimed MDF - F6204739/16 x 2-1/4

494 E2E BullnosePrimed MDF - F6204941/2 x 3-1/4

495 E2E BullnoseHemlock - VG - H495VG5/8 x 3-1/4

Primed MDF - F52049511/16 x 3-1/2

CVG Fir - F1204955/8 x 3-1/2

100 E2E BullnoseHemlock - H100D9/16 x 1-1/2

1 E2E BullnoseHemlock - H17/16 x 2-1/4

175 E2E BullnoseHemlock - H1751/2 x 2-1/4

Hemlock - H175VG1/2 x 2-1/4

908 ReedPrimed MDF - F6209089/16 x 3-1/2

1000 FlutedPrimed MDF - F4210005/8 x 3-3/8

1001 Fluted & ReedHemlock - H100111/16 x 3-1/4

3125 Fluted & ReedFJ Primed Pine - P3231259/16 x 3-1/4

3130 Fluted & ReedFJ Primed Pine - P3231309/16 x 2-1/4

Primed MDF - Hemlock - FJ Primed Pine

Casing

Page 7: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

6

Base

234Primed MDF - F6102349/16 x 5-1/2

412 CambridgePrimed MDF - F6104129/16 x 4-1/2

243Primed MDF - F6102431/2 x 4-1/4

211 VictorianHemlock - H2113/4 x 4-1/4

326Primed MDF - F6103269/16 x 3-3/8

545Primed MDF - F6115455/8 x 5

Hemlock - H54511/16 x 5

208FJ Primed Pine - P3102089/16 x 3-1/4

3000C ColonialHemlock - H3000C5/8 x 3-1/4

Primed MDF - Hemlock - FJ Primed Pine

Page 8: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

7

Base

6688Primed MDF - F61066889/16 x 6-1/4

618 MouldedPrimed MDF - F6106189/16 x 5-1/4

Hemlock - H6181/2 x 5-1/4

FJ Primed Pine - P6106189/16 x 5-1/4

285 Hemlock - H285VG 1/2 x 5-1/4

625 MouldedHemlock - H6257/16 x 2-1/4

FJ Primed Pine - P3106257/16 x 2-1/4

623 MouldedPrimed MDF - F6106231/2 x 3-1/4

FJ Primed Pine - P310623A7/16 x 3-1/4

Hemlock - H6237/16 x 3-1/4

Knotty Pine - P7106231/2 x 3-1/4

622 MouldedPrimed MDF - F6106221/2 x 2-1/2

260 ColonialHemlock - H2603/8 x 3-1/4

653 GingerbreadHemlock - H6537/16 x 3-1/4

FJ Primed Pine - P3106533/8 x 3-1/4

663 GingerbreadHemlock - H6637/16 x 4-1/4

673 GingerbreadHemlock - H6737/16 x 5-1/4

714 GingerbreadFJ Primed Pine - P3107149/16 x 4-1/8

716 GingerbreadFJ Primed Pine - P3107169/16 x 4-5/8

Primed MDF - Hemlock - FJ Primed Pine

Page 9: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

8

Base

218 SierraPrimed MDF - F6102189/16 x 5-1/4

714 SierraPrimed MDF - F6107149/16 x 7-1/4

215 SierraPrimed MDF - F6102151/2 x 3-1/8

261 Single BullnosePrimed MDF - F6102611/2 x 3-1/4

473 Single BullnoseHemlock-VG - H473VG1/2 x 3-1/2

496 Single BullnoseHemlock-VG - H496VG9/16 x 5-3/8

CVG Fir - F1104969/16 x 5-3/8

230 ComboHemlock - H2305/8 x 2-1/4

41 StreamlineHemlock - H417/16 x 2-1/4

250 StreamlineHemlock - H2507/16 x 2-1/2

3102 StreamlineHemlock - H31027/16 x 3-1/4

210 SanitaryHemlock - H2103/8 x 1-1/2

240 SanitaryHemlock - H2403/8 x 2-1/4

515 SanitaryHemlock - H5151/2 x 1-9/16

Primed MDF - Hemlock - FJ Primed Pine

Page 10: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

9

Crowns

47FJ Primed Pine - P3400475/8 x 4-3/4

54Hemlock - H541/2 x 2-1/4

FJ Primed Pine - P3300549/16 x 2-1/4

49Primed MDF - F6300499/16 x 3-5/8

Hemlock - H491/2 x 3-1/4

FJ Primed Pine - P3300499/16 x 3-5/8

50Hemlock - H501/2 x 3-7/16

48Primed MDF - F6300489/16 x 4-1/4

Hemlock - H481/2 x 4-1/4

47AFJ Primed Pine - P330047A9/16 x 4-5/8

46Primed MDF - 9/16 x 5-1/4F630046

51FJ Primed Pine - P3300519/16 x 3-1/4

75 Bed MouldHemlock - H751/2 x 1-5/8

311 Bed MouldHemlock - H3111/2 x 2-5/8

248FJ Primed Pine - P3332481-1/4 x 2-1/4

3242Hemlock - H32421/2 x 11/16

3244Hemlock - H32449/16 x 1-1/4

FJ Primed Pine - 5/8 x 1-1/4P333244

3248FJ Primed Pine - P3332481-1/4 x 2-1/4

Primed MDF - Hemlock - FJ Primed Pine

Page 11: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

10

Crowns

413Primed MDF - F6304131-1/4 x 6-5/16

412Primed MDF - F6304125/8 x 4-1/2

417Primed MDF - F630417A1-1/4 x 3-7/8

911 Lintel MouldHemlock - H911D1-1/4 x 2-1/4 912 Lintel Mould

Primed MDF - F5209121-1/2 x 2-1/4

712 Classic CrownFJ Primed Pine - P33071211/16 x 4-1/2

Primed MDF - Hemlock - FJ Primed Pine

Page 12: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

11

Chair Rails

390Hemlock - H3905/8 x 2-7/16

FJ Primed Pine - P33039011/16 x 2-5/8

297Primed MDF - F53329711/16 x 3 397

Primed MDF - F6333971 x 3-1/2

Hand Rails

3507Hemlock - H35071-1/16 x 2-1/4

231Hemlock - H2311-7/16 X 1-5/8

Primed MDF - Hemlock - FJ Primed Pine

Page 13: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

12

Trims

352 CornersFJ Primed Pine - P34035290 Degree

45 CornersFJ Primed Pine - P34004545 Degree

1030 Drip CapHemlock - H10303/4 x 1-5/8

1031 Drip Cap Water TableHemlock - H10311-3/8 x 3 180 Brickmould

Hemlock - H1801-3/16 x 2

FJ Primed Pine - P3201801-1/4 x 2

CVG Fir - F1201801-1/4 x 2

440 Shingle MouldHemlock - H4405/8 x 1-1/2

442 Shake MouldHemlock - H4421-1/4 x 2-1/4

FJ Primed Pine - P3204421-1/4 x 2-1/4

953 Opening TrimHemlock - H953WM7/16 x 1-5/16

FJ Primed Pine - P3509537/16 x 1-3/8

Primed MDF - F5309537/16 x 1-5/16

1020 I.S. Back BandHemlock - H10203/4 x 1-1/16

1021 O.S. Back BandHemlock - H10211-1/16 x 1-1/16

Primed MDF - Hemlock - FJ Primed Pine

Page 14: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

13

Rounds

Outside Corners

3222 Full RoundHemlock - H322211/16 Dia.

3226 Full RoundHemlock - H32261-5/16 Dia.

3228 Full RoundHemlock - H32281-1/2 Dia.

3202 Quarter RoundHemlock - H32021/2 x 1/2

3206 Quarter RoundHemlock - H320611/16 x 11/16

325 Quarter RoundHemlock - H3251 x 1

106 Quarter RoundFJ Primed Pine- P34010611/16 x 11/16

3200 Quarter RoundHemlock - H32001/4 x 1/4

3201 Quarter RoundHemlock - H32013/8 x 3/8

108 Quarter RoundFJ Primed Pine - P3401081/2 x 1/2

3288 Base ShoeHemlock - H32887/16 x 11/16

126 Base ShoeFJ Primed Pine - P3101261/2 x 3/4

3212 Half RoundHemlock - H32125/16 x 3/4

3280 OS CornerHemlock - H32801-1/16 x 1-1/16

204 OS CornerHemlock - H2041-1/4 x 1-1/4

3282 OS CornerHemlock - H328211/16 x 11/16

205 OS CornerFJ Primed Pine - P3402051-1/8 x 1-1/8

206 OS CornerFJ Primed Pine - P3402063/4 x 3/4

202 OS CornerHemlock - H2021-1/16 x 1-1/16

FJ Primed Pine - P3402021-1/16 x 1-1/16

Primed MDF - Hemlock - FJ Primed Pine

Page 15: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

14

Coves

334Hemlock - H3341/2 x 1-1/2

3260Hemlock - H32601/2 x 1/2

3264Hemlock - H326411/16 x 11/16

93FJ Primed Pine - P3400933/4 x 3/4

85FJ Primed Pine - P3400859/16 x 1-3/4

305Hemlock - H3055/8 x 2-5/8

306Hemlock - H3065/8 x 3-1/2

Stop, OG & Moulded Batten417 OG StopHemlock - H4173/8 x 3/4

418 OG StopHemlock - H4187/16 x 1-1/8

419 OG StopHemlock - H4197/16 x 1-5/16

420 OG StopHemlock - H4207/16 x 1-5/8

936 OG StopHemlock - H9363/8 x 1-3/8

FJ Primed Pine - P3509367/16 x 1-3/8

1050 Moulded BattenHemlock - H10503/8 x 1-5/16

Primed MDF - Hemlock - FJ Primed Pine

Page 16: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

15

Bullnose & Squares

869 Bullnose StopHemlock - H8697/16 x 1-1/16

866 Bullnose StopHemlock - H8667/16 x 1-5/16

865 Bullnose StopHemlock - H8657/16 x 1-1/2

413 Bullnose StopHemlock - H4137/16 x 1-5/8

887 Bullnose StopHemlock - H8873/8 x 1-1/4

FJ Primed Pine - P3508873/8 x 1-1/4

3422 Bullnose StopHemlock - H34225/16 x 1-3/16

425 Garage Door StopHemlock - H4259/16 x 2-1/4

142 Screen FlatFJ Primed Pine - P3401421/4 x 3/4

254 Parting StripFJ Primed Pine - P3402541/2 x 3/4

268 LatticeHemlock - H2681/4 x 1-1/8

267 LatticeHemlock - H2671/4 x 1-3/8

FJ Primed Pine - P3402679/32 x 1-3/8

266 LatticeHemlock - H2661/4 x 1-5/8

264 LatticeHemlock - H2641/4 x 2-1/4

3274 Screen FlatHemlock - H32741/4 x 3/4

3516 SquareHemlock - H351611/16 x 11/16

3517 SquareHemlock - H35171-1/16 x 1-1/16

3428 Parting StripHemlock - H34287/16 x 11/16

13 Beaded ScreenHemlock - H131/4 x 3/4

Primed MDF - Hemlock - FJ Primed Pine

Page 17: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

16

Miscellaneous

300C Wainscot CapPrimed MDF - F490300C3/4 x 2

292 Wainscot CapHemlock - H2929/16 x 1-1/8

163 Base CapHemlock - H16311/16 x 1-3/8

Primed MDF - F51016311/16 x 1-3/8

701 Panel CapHemlock - H7015/8 x 1-1/4

182 Panel MouldHemlock - H1829/16 x 1-1/2

995 Cant StripSolid Pine - P1909953/4 x 3/4

696 Window StoolPrimed MDF - F67069611/16 x 6-9/16

703 Floor CapHemlock - H7031/2 x 3/4

1010 Picture MouldHemlock - H101011/16 x 1-5/8

954 Window StopPrimed MDF - F5409545/8 x 1-5/16

Hemlock - H9541/2 x 1-1/8

1130 Panel MouldHemlock - H11301/2 x 1

T & G PanelingHemlock - HBP58045/8 x 3-3/8

705 Base CapHemlock - H7053/4 x 1-1/8

Primed MDF - Hemlock - FJ Primed Pine

Page 18: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

17

Finish LumberSize Lengths Code

1/2 X 4 16’ F660124

1/2 X 6 16’ F660126

1/2 X 8 16’ F660128

1 X 2 8’, 10’, 12’, 16’ F661102

1 X 3 8’, 10’, 12’, 16’ F661103

1 X 4 8’, 10’, 12’, 16’ F661104

1 X 5 8’, 10’, 12’, 16’ F661105

Size Lengths Code

1 X 6 8’, 10’, 12’, 16’ F661106

1 X 7 8’, 16’ F661107

1 X 8 8’, 10’, 12’, 16’ F661108

1 X 10 8’, 10’, 12’, 16’ F661110

1 X 12 8’, 10’, 12’, 16’ F661112

5/4 x 4 16’ F660544

5/4 x 6 16’ F660546

5/4 x 8 16’ F660548

PRIMED MDF:

VG S4S - C BTR

SIZE CODE SIZE CODE SIZE CODE SIZE CODE

1 x 21 x 31 x 41 x 51 x 61 x 7

HBCVG102HBCVG103HBCVG104HBCVG105HBCVG106HBCVG107

1 x 81 x 101 x 125/4 x 65/4 x 8

HBCVG108HBCVG110HBCVG112HBCVG546HBCVG548

1/4 X 41/4 X 61/2 x 41/2 x 61 x 21 x 31 x 4

H104MCH106MC

HBCB.504HBCB.506HBCB102HBCB103HBCB104

1 x 51 x 61 x 8

1 x 101 x 122 x 2

HBCB105HBCB106HBCB108HBCB110HBCB112HBCD202

MGS4S - C BTR MIX GRAIN

HEMLOCK FINISH:

C BTR VERTICAL GRAIN

1 x 2 FVGC102 2 x 3 FVGC2031 x 3 FVGC103 2 x 4 FVGC2041 x 4 FVGC104 2 x 6 FVGC2061 x 5 FVGC105 2 x 8 FVGC2081 x 6 FVGC106 2 x 10 FVGC2101 x 8 FVGC108 2 x 12 FVGC2121 x 10 FVGC1101 x 12 FVGC112

C Btr Mix Grain

2 x 2 FMGC202

4 x 4 FMGC404

T & G Flooring

1 x 4 FVGTG104

C Btr Vertical Grain

1/2 x 4 FVGC.504 5/4 x 4 FVGC5404

1/2 x 6 FVGC.506 5/4 x 6 FVGC5406

1/2 x 8 FVGC.508 5/4 x 8 FVGC5408

S4S BOARDS: VG FIR FINISH:

SIZE CODE LENGTHS

1 x 31 x 41 x 51 x 61 x 8

1 x 101 x 12

F460103F460104F460105F460106F460108F460110F460112

16’16’16’16’16’16’16’

MDF REGULAR:SIZE CODE LENGTHS

1 x 21 x 31 x 41 x 51 x 61 x 8

1 x 101 x 12

P36310216P36310316P36310416P36310516P36310616P36310816P36311016P36311216

16’16’16’16’16’16’16’16’

FJ PRIMED PINE:SIZE CODE SPECIE

1 x 41 x 41 x 51 x 51 x 61 x 61 x 71 x 81 x 8

DCBD104GODCBD104SODCBD105GODCBD105SODCBD106GODCBD106SODCBD107GODCBD108GODCBD108SO

GOLDEN OAKSTRAND OAKGOLDEN OAKSTRAND OAKGOLDEN OAKSTRAND OAKGOLDEN OAKGOLDEN OAKSTRAND OAK

PREFINISHED S4S:

Primed MDF - Hemlock - FJ Primed Pine

Page 19: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

18

16Cherry - C1200163/4 x 3-1/2

Knotty Alder - A120016K3/4 x 3-1/2

Maple - M8200163/4 x 3-1/2

39Cherry - C12003911/16 x 3-1/4

Knotty Alder - A120039K11/16 x 3-1/4

Maple - M82003911/16 x 3-1/4

60Cherry - C1200603/4 x 3

Knotty Alder - A120060K3/4 x 3

Maple - M8200603/4 x 3

65Knotty Alder - A120065K13/16 x 3-1/4

Maple - M82006513/16 x 3-1/4

62Cherry - C1200623/4 x 2-3/4

Knotty Alder - A120062K3/4 x 2-3/4

Maple - M8200623/4 x 2-3/4

57Cherry - C1200577/8 x 3-1/2

Knotty Alder - A120057K7/8 x 3-1/2

Maple - M8200577/8 x 3-1/2

1403Knotty Alder - A121403K5/8 x 3-1/4

Casing

Page 20: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

19

312 BeadedKnotty Alder - A120312K11/16 x 3

535Knotty Alder - A120535K11/16 x 3-1/2

1002Knotty Alder - A121002K5/8 x 2-1/4

1003 Knotty Alder - A121003K5/8 x 3-1/4

495Knotty Alder - A120495K1 x 4

356 ColonialOak Veneer - O3203561/2 x 2-3/16

Golden Oak - DC35614GO7/16 x 2-1/4

Strand Oak - DC35614SO7/16 x 2-1/4

Knotty Alder - A120356K11/16 x 2-1/4

Oak - O1203561/2 x 2-1/4

444 ColonialOak Veneer - O3204445/8 x 3-1/4

F115 ColonialOak - O1201151/2 x 2-1/4

5475 ArchitraveKnotty Alder - A125475K1-1/16 x 4-3/4

324 BevelOak Veneer - O3203241/2 x 2-1/4

Oak - O120324B1/2 x 1-9/16

Oak - O1203241/2 x 2-1/4

307 BevelOak Veneer - O3203071/2 x 1-1/2

F113 BevelOak - O1201137/16 x 2-1/4

5575 Architrave Modifi edKnotty Alder - A125575K1-1/16 x 5-3/4

Casing

Page 21: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

20Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

20Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

HH ddd ddddHH ddd dddd

Service - Quality - Integrity

20Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

20

Base

620Knotty Alder - A110620K9/16 x 4-1/4

Maple - M8106209/16 x 4-1/4

85Cherry - C1100853/4 x 4-1/4

Knotty Alder - A110085K3/4 x 4-1/4

Maple - M8100853/4 x 4-1/4

90Cherry - C1100909/16 x 4-1/2

Knotty Alder - A110090K9/16 x 4-1/2

Maple - M8100909/16 x 4-1/2

633 O.G. ColonialOak Veneer - O3106331/2 x 3-1/4

634 O.G. ColonialOak - O1106343/8 x 2-3/4

724 StreamlineOak - O1107243/8 x 2-3/4

623Knotty Alder - A110623K1/2 x 3-1/4

618Knotty Alder - A110618K1/2 x 5-1/4

Page 22: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

21Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

21

Service - Quality - Integrity

HHHHH dddd ddHHHHH dddd dd

Service - Quality - IntegrityService - Quality - Integrity

49Cherry - C110B499/16 x 4-1/4

Knotty Alder - A110B49K9/16 x 4-1/4

Maple - M810B499/16 x 4-1/4

31Cherry - C110B319/16 x 4-1/4

Knotty Alder - A110B31K9/16 x 4-1/4

Maple - M810B319/16 x 4-1/4

545Knotty Alder - A110545K5/8 x 5

412 VictorianKnotty Alder - A110412K9/16 x 4-1/2

400Knotty Alder - A112400K5/8 x 4

1013Knotty Alder - A111013K1/2 x 3-1/4

1015Knotty Alder - A111015K1/2 x 5-1/4

1414Knotty Alder - A111414K1/2 x 4-1/4

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale. 21

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale. 21

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale. 21

Base

Page 23: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

22Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

HH ddd dddd

Service - Quality - Integrity

22

Crowns

911 Lintel MouldKnotty Alder - A140911K1-1/4 x 2-1/4

514Knotty Alder - A130514K1-1/4 x 5-1/4

1045Knotty Alder - A131045K11/16 x 5-1/4

1048Knotty Alder - A131048K11/16 x 4-1/4

51 Oak Veneer - O3300519/16 x 3-1/4

Knotty Alder - A131051K11/16 x 3-1/4

637- CrownOak - O1306373/4 x 5-1/4

638- DentilOak - O1306385/8 x 1

Page 24: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

23

HHHHH dddd dd

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

23

Miscellaneous

239 SquareOak - O1602393/4 x 3/4

520 Flat ScreenOak - O1405201/4 x 3/4

430 Flat ScreenKnotty Alder - A140430K1/4 x 3/4

661 Quarter RoundOak - O1406613/4 x 3/4

662 Quarter RoundOak - O1406621/2 x 1/2

105 Quarter RoundSuperior Alder - A140105S3/4 x 3/4

111 Quarter RoundSuperior Alder - A140111S5/16 x 5/16

200 Base ShoeOak - 01102007/16 x 3/4

Page 25: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

24

Miscellaneous

953 Opening TrimSuperior Alder - A150953S1/2 x 1-3/8

180 BrickmouldKnotty Alder - A120180K1-1/4 x 2

Cherry - C1201801-1/4 x 2

329 Counter EdgeOak - O1932903/8 x 1-1/4

440 Counter EdgeOak - O1904403/8 x 1-1/2

4421 Counter EdgeOak - O19044213/8 x 1-3/4

431 BacksplashOak -O1904319/16 x 3-1/2

382 OS CornerKnotty Alder - A1403821-1/4 x 1-1/4

651 OS CornerOak - O1406513/4 x 3/4

652 OS CornerOak - O1406521-1/6 x 1-1/6

1518 BackbandCherry - C12015181-1/2 x 1-1/8

Knotty Alder - A121518K1-1/2 x 1-1/8

Maple - M82015181-1/2 x 1-1/8

Page 26: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

25

Miscellaneous

20 Wainscot CapOak - O1400205/8 x 1-3/4

705 Panel CapKnotty Alder - A140705K3/4 x 1-1/8

101 Wainscot CapOak - O19010115/16 x 1-5/8

601 CoveOak - O1406013/4 x 3/4

93 CoveSuperior Alder - A140093S3/4 x 3/4

703 Floor CapKnotty Alder - A140703K1/2 x 3/4 451 Lip Moulding

Oak - O1404513/4 x 1-1/4

Page 27: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

26Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

HH ddd dddd

Service - Quality - Integrity

26Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Components Hardwoods

887 Bullnose StopMahogany - M8773/8 x 1-1/4

Oak Veneer - O3508873/8 x 1-1/4

Cherry - C150887707/16 x 1-1/4

Maple - M850887707/16 x 1-1/4

774 Solid StopMaple - M850774701/2 x 1-11/16

Cherry - C150774801/2 x 1-11/16

Maple - M850774801/2 x 1-11/16

1-3/4 Kerfed Ext. AstragalCherry - C1901308071-5/16 x 7

Cherry - C1901308081-5/16 x 8

Knotty Alder - DFASTSKKA81-5/16 x 8

Interior AstragalSuperior Knotty Alder - DFASTSKA81-3/8 x 8

Cherry - C190138081-3/8 x 8

Knotty Alder - DFASTKA1-3/8 X 8

866 Bullnose StopKnotty Alder - A150866K1/2 x 1-3/8

301 Bullnose StopOak - O1503013/8 x 1-1/16

936 Colonial StopKnotty Alder - A150936K1/2 x 1-3/8

Page 28: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

27

HHHHH dddd dd

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

27Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Components FJ Veneer

774 StopCherry - CV50774071/2 x 1-11/16 x 86

Maple - MPV50774071/2 x 1-11/16 x 86

Alder Select - ASV50774071/2 x 1-11/16 x 86

Cherry - CV50774081/2 x 1-11/16 x 99

Maple - MPV50774081/2 x 1-11/16 x 99

Fir - FV50774081/2 x 1-11/16 x 99

916 StopCherry - CV50916073/8 x 1-3/8 x 86

Maple - MPV50916073/8 x 1-3/8 x 86

Fir - FV50916073/8 x 1-3/8 x 86

Alder Select - ASV50916073/8 x 1-3/8 x 86

180 BrickmouldMeranti - MV201801-1/4 x 2

887 StopCherry - CV50887077/16 x 1-1/4 x 86

Maple - MPV50887077/16 x 1-1/4 x 86

Oak Veneer - O3508873/8 x 1-1/4

Strand Oak - DCSTP3/8 x 1-1/4

Golden Oak - DCSTP3/8 x 1-1/4

Cherry - CV50887087/16 x 1-1/4 x 99

Maple - MPV50887087/16 x 1-1/4 x 99

Fir - FV50887077/16 x 1-1/4 x 86

Alder Select - ASV50887077/16 x 1-1/4 x 86

937 StopCherry - CV50937073/8 x 1-3/8 x 86

Maple - MPV50937073/8 x 1-3/8 x 86

Fir - FV50937073/8 x 1-3/8 x 86

Alder Select - ASV50937073/8 x 1-3/8 x 86

Page 29: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

28Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

HH ddd dddd

Service - Quality - Integrity

28

Finish LumberDescription Dimensions Lengths Code

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

Knotty Alder S4S

1 x 3

1 x 4

1 x 5

1 x 6

1 x 8

1 x 10

1 x 12

5/4 x 4

5/4 x 5

5/4 x 6

5/4 x 8

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

6 - 10 R/L

A160103K

A160104K

A160105K

A160106K

A160108K

A160110K

A160112K

A160544K

A160545K

A160546K

A160548K

Description Dimensions Lengths Code

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

S4S Oak

1 x 2

1 x 3

1 x 4

1 x 5

1 x 6

1 x 8

1 x 10

1 x 12

2 x 2

2 x 4

2 x 6

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

6, 8, 10, 12

8, 10, 12

8, 10, 12

8, 10, 12

O BD102

O BD103

O BD104

O BD105

O BD106

O BD108

O BD110

O BD112

O DI202

O DI204

O DI206

KNOTTY ALDER:

RED OAK SQUARE EDGE:

All Bevel and T&G profi les are Kiln Dried and sold R/L Tally only. FJ are sold with Trim Backs

Patterns: Pine, Cedar, Hemlock, Knotty Alder & Fir

CeilingHemlock - HBP58045/8 x 3-3/8 Ceiling

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Page 30: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

Hardwoods

29

HHHHH dddd dd

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

29

Radius Base Corners

Item # Description For Use With PCS/CTN

H C356BOR

H C356DUL

H C1208BOR

H C444BOR

H C444UL

H C444ABOR

5/8” x 2-1/4” Hemlock Colonial

9/16” x 2-1/4” Paint Grade

11/16: X 2-1/2” Hemlock Colonial

5/8” x 3-1/4” Hemlock Colonial

9/16” x 3-1/8” Paint Grade 3-1/8”

5/8” x 3-1/8” Paint Grade

Hemlock H 356WM, MDF 356, FJ Primed 356

Primed MDF 356

Hemlock H 1208, FJ Primed 1208

Hemlock H 444

Primed MDF 444

FJ Primed 444A

50

50

50

50

50

50

Item # Description For Use With PCS/CTN

H C623BOR

H C623UL

H C716PBOR

7/16” x 3-1/4” Hemlock O.G.

9/16” x 3-1/4” Paint Grade O.G.

9/16” x 4-5/8” Paint Grade Gingerbread

Hemlock H 623

UL 623

FJ Primed 716

50

50

50

3/4” RADIUS BASE CORNERS3/4” RADIUS BASE CORNERS

3/4” RADIUS BASE CORNERS

For applications needing 3/4” RADIUS OS BASE CORNER piece (for casing profi les), we offer:

For applications needing 3/4” RADIUS OS BASE CORNER piece (for base profi les), we offer:

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Page 31: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

30Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale. 30Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale. 30

Item # Description For Use With PCS/CTN

H CSCSGSM

H CSCSGM

3/4” x 2-3/4” x 2-3/4” W. Maple

3/4” x 3-1/2” x 3-1/2” W. Maple

Hemlock Stain, Paint Grade

Hemlock Stain, Paint Grade

200

100

Item # Description For Use With PCS/CTN

H CPBM 3/4” x 3-1/2” x 6-1/2” W. Maple Hemlock Stain, Paint Grade 50

Item # Description For Use With PCS/CTN

H CUBI

H CUBO

H CUBOR

3/4” x 7-1/4” Hemlock ISC

3/4” x 7-1/4” Hemlock Square OSC

3/4” x 7-1/4” Hemlock Radius OSC

All Base Profi les

All Base Profi les, 90° OSC Walls

All Base Profi les, 3/4” Radius OSC

100

50

50

ROSETTES

PLINTH BLOCKS

UNIVERSAL INSIDE & OUTSIDE CORNERS

For applications needing ROSETTES, we offer:

For applications needing PLINTH BLOCKS, we offer:

For applications needing UNIVERSAL INSIDE OR OUTSIDE CORNER piece (for base profi les), we offer:

Rosettes, Plinth Blocks & Corners

Illustrations are not to scale. 30Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Page 32: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

31Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale. 31

H912 LINTEL

HBCVG104

H865

H911 LINTEL

HBCVG103

H936

H912 LINTEL

HBCVG104

H936

410 Colonial Casing - 11/16” x 2-1/4”473 Bullnose Casing - 11/16” x 2-1/4”3212 Half Round - 3/4”

49 Casing - 1” x 3-1/4”887 Stop - 7/16” x 1-1/4”

218 Sierra Base - 9/16” x 5-1/4”49 Colonial Crown - 9/16” x 3-5/8”215 Sierra Base - 1/2” x 3-1/8”1 x 3 primed E2E - 11-1/16” x 2-1/2”

1 x 10 Primed E2E - 11/16” x 9-1/4”1 x 3 Primed E2E - 11/16” x 2-1/2”413 Beaded Crown - 1-1/4” x 6-5/16”338 Howe Casing 1” x 3-1/4”

Build - Up Suggestions

Chair Rail Build-Ups

Mantel Build-Ups

Page 33: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

32

IndexHEMLOCK

Pattern # Profi le Page #

1 casing 5

13 beaded screen 15

19 casing 4

41 base 8

48 crown 9

49 crown 9

50 crown 9

54 crown 9

75 crown 9

100 casing 5

102 casing 4

110 casing 4

111 casing 4

120 casing 3

130 casing 4

133 fl at astragal 16

140 casing 5

163 base cap 16

175 casing 5

175 vg casing 5

180 brick mould 12

182 panel mould 16

190 casing 2

195 casing 2

202 outside corner 13

204 outside corner 13

210 base 8

211 base 6

230 base 8

231 hand rail 11

240 base 8

250 base 8

260 base 7

264 lattice 15

266 lattice 15

267 lattice 15

268 lattice 15

285 base 7

292 wainscot cap 16

305 cove 14

HEMLOCK

Pattern # Profi le Page #

306 cove 14

311 crown 9

324 casing 4

325 quarter round 13

327 casing 4

334 cove 14

350 casing 3

356 casing 4

356 vg casing 4

390 chair rail 11

411 casing 2

413 stop 15

417 o.g. stop 14

418 o.g. stop 14

419 o.g. stop 14

420 o.g. stop 14

425 garage dr stop 15

440 shingle mould 12

442 shake mould 12

444 casing 3

472 casing 5

473 vg base 8

495 vg casing 5

496 vg base 8

515 base 8

535 casing 2

545 base 6

618 base 7

623 base 7

625 base 7

653 base 7

663 base 7

673 base 7

701 panel cap 16

703 fl oor cap 16

705 base cap 16

865 stop 15

866 stop 15

869 stop 15

887 stop 15

911 lintel 10

HEMLOCK

Pattern # Profi le Page #

936 o.g. stop 14

953 opening trim 12

954 window stop 16

1001 casing 5

1010 picture mould 16

1020 back band 12

1021 back band 12

1030 drip cap 12

1031 drip cap 12

1050 batten 14

1130 panel mould 16

1208 casing 5

1254 architrave 2

2000c casing 3

2150 casing 3

3000 casing 4

3000c base 6

3002 casing 4

3005 casing 3

3014 casing 4

3102 base 8

3200 quarter round 13

3201 quarter round 13

3202 quarter round 13

3206 quarter round 13

3212 half round 13

3222 full round 13

3226 full round 13

3228 full round 13

3242 crown 9

3244 crown 9

3260 cove 14

3264 cove 14

3274 screen mould 15

3280 outside corner 13

3282 outside corner 13

3288 base shoe 13

3422 stop 15

3428 parting strip 15

3507 hand rail 11

3516 square 15

Page 34: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

33

IndexHEMLOCK

Pattern # Profi le Page #

3517 square 15

5000 architrave 2

5020a architrave 2

1/4 x 4 mg s4s board 17

1/4 x 6 mg s4s board 17

1/2 x 4 mg s4s board 17

1/2 x 6 mg s4s board 17

1 x 2 mg s4s board 17

1 x 2 vg s4s board 17

1 x 3 mg s4s board 17

1 x 3 vg s4s board 17

1 x 4 mg s4s board 17

1 x 4 vg s4s board 17

1 x 5 mg s4s board 17

1 x 5 vg s4s board 17

1 x 6 mg s4s board 17

1 x 6 vg s4s board 17

1 x 7 vg s4s board 17

1 x 8 mg s4s board 17

1 x 8 vg s4s board 17

1 x 10 mg s4s board 17

1 x 10 vg s4s board 17

1 x 12 mg s4s board 17

1 x 12 vg s4s board 17

5/4 x 6 vg s4s board 17

5/4 x 8 vg s4s board 17

2 x 2 mg s4s board 17

t & g panel paneling 16

Primed MDF

Pattern # Profi le Page #

002 casing 3

003 casing 3

19 casing 4

46 crown 9

48 crown 9

49 casing 2

49 crown 9

158 casing 4

163 base cap 16

Primed MDF

Pattern # Profi le Page #

214 casing 4

215 base 8

218 base 8

233 casing 3

234 base 6

243 base 6

261 base 8

300c wainscot cap 16

312 casing 3

326 base 6

338 casing 5

356 casing 4

388 casing 2

390 chair rail 11

397 chair rail 11

410 casing 2

411 casing 2

412 casing 6

412 crown 10

413 crown 10

417 crown 10

444 casing 3

473 casing 5

494 casing 5

495 casing 5

535 casing 2

545 casing 6

618 casing 7

622 base 7

623 base 7

696 window stool 16

714 base 8

908 casing 5

912 lintel 10

953 opening trim 12

954 window stop 16

1000 casing 5

2150 casing 3

5000 architrave 2

5020 architrave 2

6688 casing 7

Primed MDF

Pattern # Profi le Page #

1/2 x 4 s4s board 17

1/2 x 6 s4s board 17

1/2 x 8 s4s board 17

1 x 2 s4s board 17

1 x 3 s4s board 17

1 x 4 s4s board 17

1 x 5 s4s board 17

1 x 6 s4s board 17

1 x 7 s4s board 17

1 x 8 s4s board 17

1 x 10 s4s board 17

1 x 12 s4s board 17

5/4 x 4 s4s board 17

5/4 x 6 s4s board 17

5/4 x 8 s4s board 17

KNOTTY ALDER

Pattern # Profi le Page #

16 casing 18

31 base 21

39 casing 18

49 base 21

51 crown 22

57 casing 18

60 casing 18

62 casing 18

65 casing 18

85 base 20

90 base 20

93 cove 25

105 quarter round 23

111 quarter round 23

180 brick mould 24

312 casing 19

356 casing 19

382 outside corner 24

400 base 21

412 base 21

430 screen mould 23

Page 35: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

34

IndexKNOTTY ALDER

Pattern # Profi le Page #

495 casing 19

514 crown 22

535 casing 19

545 base 21

618 base 20

620 base 20

623 base 20

703 fl oor cap 25

705 panel cap 25

866 stop 26

911 lentil mould 22

936 o.g. stop 26

953 opening trim 24

1002 casing 19

1003 casing 19

1013 base 21

1015 base 21

1045 crown 22

1048 crown 22

1403 casing 18

1414 base 21

1518 backband 24

5475 architrave 19

5575 architrave 19

1 x 3 s4s boards 28

1 x 4 s4s boards 28

1 x 5 s4s boards 28

1 x 6 s4s boards 28

1 x 8 s4s boards 28

1 x 10 s4s boards 28

1 x 12 s4s boards 28

5/4 x 4 s4s boards 28

5/4 x 5 s4s boards 28

5/4 x 6 s4s boards 28

5/4 x 8 s4s boards 28

FINGER JOINT PRIMED PINE

Pattern # Profi le Page #

003 casing 3

32 casing 4

FINGER JOINT PRIMED PINE

Pattern # Profi le Page #

34 casing 4

45 outside corner 12

47 crown 9

47 crown 9

49 crown 9

51 crown 9

54 crown 9

85 cove 14

93 cove 14

106 quarter round 13

108 quarter round 13

126 base shoe 13

140 casing 5

142 screen mould 15

180 brick mould 12

190 casing 2

200 casing 4

202 outside corner 13

205 outside corner 13

206 outside corner 13

208 base 6

248 crown 9

254 parting stop 15

267 lattice 15

297 chair rail 11

352 outside corner 12

356 casing 4

390 chair rail 11

442 shake mould 12

444 casing 3

618 base 7

623 base 7

625 base 7

653 base 7

712 crown 10

714 base 7

716 base 7

887 stop 15

936 o.g. stop 14

FINGER JOINT PRIMED PINE

Pattern # Profi le Page #

953 opening trim 12

1208 casing 5

3000 casing 4

3002 casing 4

3005 casing 3

3125 casing 5

3130 casing 5

3244 crown 9

3248 crown 9

1 x 2 s4s boards 17

1 x 3 s4s boards 17

1 x 4 s4s boards 17

1 x 5 s4s boards 17

1 x 6 s4s boards 17

1 x 8 s4s boards 17

1 x 10 s4s boards 17

1 x 12 s4s boards 17

OAKPattern # Profi le Page #

20 wainscot cap 25

101 wainscot cap 25

113 casing 19

115 casing 19

200 base shoe 23

239 square 23

301 stop 26

324 casing 19

324b casing 19

329 counter edge 24

356 casing 19

431 backsplash 24

440 counter edge 24

451 lip mould 25

520 screen mould 23

601 cove 25

634 base 20

637 crown 22

638 dentil 22

Page 36: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey.

Illustrations are not to scale.

Service - Quality - Integrity

35

IndexOAK

Pattern # Profi le Page #

651 outside corner 24

652 outside corner 24

661 quarter round 23

662 quarter round 23

724 base 20

4421 counter edge 24

1 x 2 s4s boards 28

1 x 3 s4s boards 28

1 x 4 s4s boards 28

1 x 5 s4s boards 28

1 x 6 s4s boards 28

1 x 8 s4s boards 28

1 x 10 s4s boards 28

1 x 12 s4s boards 28

2 x 2 s4s boards 28

2 x 4 s4s boards 28

2 x 6 s4s boards 28

CHERRY Pattern # Profi le Page #

16 casing 18

31 base 21

39 casing 18

49 base 21

57 casing 18

60 casing 18

62 casing 18

85 base 20

90 base 20

180 brickmould 24

774 stop 26

887 stop 26

1518 back band 24

MAPLEPattern # Profi le Page #

16 casing 18

31 base 21

39 casing 18

49 base 21

57 casing 18

60 casing 18

62 casing 18

65 casing 18

85 base 20

90 base 20

620 base 20

774 stop 26

887 stop 26

1518 back band 24

VG FIRPattern# Profi le Page#

1/2 x 4 s4s boards 17

1/2 x 6 s4s boards 17

1/2 x 8 s4s boards 17

1 x 2 s4s boards 17

1 x 3 s4s boards 17

1 x 4 s4s boards 17

1 x 4 fl ooring t & g fl ooring 17

1 x 5 s4s boards 17

1 x 6 s4s boards 17

1 x 8 s4s boards 17

1 x 10 s4s boards 17

1 x 12 s4s boards 17

5/4 x 4 s4s boards 17

5/4 x 6 s4s boards 17

5/4 x 8 s4s boards 17

2 x 2 s4s boards 17

2 x 3 s4s boards 17

2 x 4 s4s boards 17

2 x 6 s4s boards 17

2 x 8 s4s boards 17

2 x 10 s4s boards 17

2 x 12 s4s boards 17

4 x 4 s4s boards 17

Page 37: OrePac Moulding and Millwork Guide

Profi les with Black text are in stock at Spokane.Allow 1-2 weeks for profi les in grey. Illustrations are not to scale.

Service - Quality - Integrity

36

IndexMISC.

Pattern # Profi le Specie Page #

51 crown oak veneer 22

180 brick mould v.g. fi r 12

180 brick mould mahogany veneer 27

307 casing oak veneer 19

324 casing oak veneer 19

356 casing knotty pine 4

356 casing oak veneer 19

356 casing golden oak 19

356 casing strand oak 19

444 casing knotty pine 3

444 casing oak veneer 19

495 casing v.g. fi r 5

496 base v.g. fi r 8

623 base knotty pine 7

633 base oak veneer 20

774 stop cherry veneer 27

774 stop maple veneer 27

774 stop select alder veneer 27

774 stop fi r veneer 27

887 stop oak veneer 26

887 stop mahogany 26

887 stop cherry veneer 27

887 stop maple veneer 27

887 stop oak veneer 27

887 stop fi r veneer 27

887 stop select alder veneer 27

916 stop cherry veneer 27

916 stop maple veneer 27

916 stop fi r veneer 27

916 stop select alder veneer 27

937 stop cherry veneer 27

937 stop maple veneer 27

937 stop fi r veneer 27

937 stop select alder veneer 27

995 cant strip solid pine 16

3000 casing golden oak 4

3002 casing golden oak 4

1 x 3 s4s boards regular mdf 17

1 x 4 s4s boards golden oak 17

1 x 4 s4s boards strand oak 17

MISC.Pattern # Profi le Specie Page #

1 x 4 s4s boards regular mdf 17

1 x 5 s4s boards golden oak 17

1 x 5 s4s boards strand oak 17

1 x 5 s4s boards regular mdf 17

1 x 6 s4s boards golden oak 17

1 x 6 s4s boards strand oak 17

1 x 6 s4s boards regular mdf 17

1 x 7 s4s boards golden oak 17

1 x 8 s4s boards golden oak 17

1 x 8 s4s boards strand oak 17

1 x 8 s4s boards regular mdf 17

1 x 10 s4s boards regular mdf 17

1 x 12 s4s boards regular mdf 17

Notes

Page 38: OrePac Moulding and Millwork Guide